MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-PREFERRED-PATH-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1120 lines
44 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-PREFERRED-PATH-MIB.my: Preferred Path MIB
--
-- March 2006, Shekher Bulusu
--
-- Copyright (c) 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-PREFERRED-PATH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TruthValue, TEXTUAL-CONVENTION,
RowStatus, StorageType FROM SNMPv2-TC
InterfaceIndexOrZero,
InterfaceIndex FROM IF-MIB
FcAddressId, VsanIndex FROM CISCO-ST-TC
ciscoMgmt FROM CISCO-SMI
notifyVsanIndex FROM CISCO-VSAN-MIB;
ciscoPrefPathMIB MODULE-IDENTITY
LAST-UPDATED "200610261444Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"The MIB module for the management of
preferred path. This MIB enables managers
to configure and monitor Preferred Path
parameters.
Preferred path provides a method of routing
traffic over the selected paths, not necessarily
the preferred shortest path as chosen by routing
protocols such as FSPF. This kind of control allows
users to choose shortest paths based on
characteristics, such as frames received on a
selected interface or frames with selected source
FC-ID. This feature allows users to ensure paths
seperation between switches for different traffic
between a host and a target.
Glossary:
FC-ID - Fibre Channel Identifier.
VSAN - Virtual Storage Area Network.
fcroute - Fibre Channel route to host or target.
FSPF - Fibre Shortest Path First.
IVR - Inter-VSAN Routing."
REVISION "200610261444Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 592 }
ciscoPrefPathMIBNotifs OBJECT IDENTIFIER
::= { ciscoPrefPathMIB 0 }
ciscoPrefPathMIBObjects OBJECT IDENTIFIER
::= { ciscoPrefPathMIB 1 }
ciscoPrefPathMIBConform OBJECT IDENTIFIER
::= { ciscoPrefPathMIB 2 }
ciscoPrefPathConfiguration OBJECT IDENTIFIER
::= { ciscoPrefPathMIBObjects 1 }
ciscoPrefPathInformation OBJECT IDENTIFIER
::= { ciscoPrefPathMIBObjects 2 }
-- Textual Conventions
CiscoPrefPathFcAddrMask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A mask to be associated with an FC-ID.
full - Represents a mask for the full
FC-ID (0xFFFFFF).
domainArea - Represents a mask only for
domain and area fields of the
FC-ID (0xFFFF00).
domain - Represents a mask only for the
domain field of the FC-ID.
(0xFF0000).
noMask - No masking."
SYNTAX INTEGER {
full(1),
domainArea(2),
domain(3),
noMask(4)
}
CiscoPrefPathStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A status of preferred path route map match
and set entries.
unknown - Unknown or undefined (error) state.
active - Indicates that the entry is
active.
pending - Indicates that the entry is
pending. Next fcroute-map or route
activation will put the state to
active.
deleted - State indicating that the active
entry was deleted. Next activation
will remove the entry.
changed - State indicating that the active
entry was changed or modified.
Next activation will apply the
changes and move the state to active."
SYNTAX INTEGER {
unknown(1),
active(2),
pending(3),
deleted(4),
changed(5)
}
CiscoPrefPathIvrNextHopVsanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IVR next hop VSAN ID. The value of zero means
no IVR next hop VSAN is available."
SYNTAX Unsigned32 (0..4093)
CiscoPrefPathPreferenceLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Metric or cost of the preferred path."
SYNTAX Unsigned32 (1..255)
-- Route-map Table
cPrefPathRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows users to configure and monitor
the preferred path fcroute-map parameters on all
the VSANs configured on the local switch.
A fcroute-map can be created per VSAN. For each
fcroute-map users can create multiple routes which
are identified by a route ID. Within each route
there can be multiple flows which are configured
using the cPrefPathRouteMapMatchTable table and
the corresponding outgoing interface for a route
can be configured using the
cPrefPathRouteMapSetTable table.
This table is the top-level table which is used to
configure the fcroute-map indexed by VSAN ID
and a route within a fcroute-map indexed by the
route ID of the route.
Entries in this table are created and deleted
using the cPrefPathRouteMapRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a route within a fcroute-map. There is
no need to configure instances of other
corresponding columns -
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive in order to make the
newly created row to active.
To delete a row in this table, a manager must
set the cPrefPathRouteMapRowStatus object
to 'destroy'. This will delete a route within a
fcroute-map."
::= { ciscoPrefPathConfiguration 1 }
cPrefPathRouteMapEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cPrefPathRouteMapTable.
There is an entry in this table for each
route within a fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex }
::= { cPrefPathRouteMapTable 1 }
CPrefPathRouteMapEntry ::= SEQUENCE {
cPrefPathRouteMapVsanIndex VsanIndex,
cPrefPathRouteMapRouteIndex Unsigned32,
cPrefPathRouteMapIntfPrefStrict TruthValue,
cPrefPathRouteMapRouteActive TruthValue,
cPrefPathRouteMapActive TruthValue,
cPrefPathRouteMapStorageType StorageType,
cPrefPathRouteMapRowStatus RowStatus
}
cPrefPathRouteMapVsanIndex OBJECT-TYPE
SYNTAX VsanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VSAN ID of this fcroute-map."
::= { cPrefPathRouteMapEntry 1 }
cPrefPathRouteMapRouteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2048)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value which identifies a
route in this fcroute-map."
::= { cPrefPathRouteMapEntry 2 }
cPrefPathRouteMapIntfPrefStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows to change the way
the preferred path selection logic would
select the preferred path.
Setting this object to 'true' will make the
preferred path to select the outgoing interface
strictly based on the preference set using the
cPrefPathRMapSetIntfPref. When this object is set
to 'false', then the preferred path selection logic
will perform selection only when the current
outgoing interface goes down."
DEFVAL { false }
::= { cPrefPathRouteMapEntry 3 }
cPrefPathRouteMapRouteActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows to activate/de-activate
the route within a fcroute-map.
If value of this object is set to 'true', then
route will be activated. If set to 'false', then
the route will be de-activated.
After the route is activated, any incremental
updates or changes made to the match or set criteria
would require this object to be set to 'true' again
(re-activation)."
DEFVAL { false }
::= { cPrefPathRouteMapEntry 4 }
cPrefPathRouteMapActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object allows to activate/de-activate all the
routes within a fcroute-map.
If value of this object is set to 'true', then all
the routes within this fcroute-map will be activated.
If set to 'false', then all routes within this
fcroute-map will be de-activated.
After the fcroute-map is activated, any incremental
updates or changes made to the match or set criteria
would require this object to be set to 'true' again
(re-activation)."
DEFVAL { false }
::= { cPrefPathRouteMapEntry 5 }
cPrefPathRouteMapStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row."
DEFVAL { volatile }
::= { cPrefPathRouteMapEntry 6 }
cPrefPathRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no need to configure instances of other
corresponding columnar objects in order to make the
newly created row to active.
Instances of all other corresponding columns can be
modified for an active row."
::= { cPrefPathRouteMapEntry 7 }
-- Route-Map Global Table
cPrefPathRouteMapGlobalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows users to configure and monitor
the preferred path fcroute-map global parameters.
Entries in this table are automatically created
when the first route in a fcroute-map is created
using the cPrefPathRouteMapTable table.
An entry is deleted automatically from this table
if either:
- The last route in a fcroute-map is removed using
the cPrefPathRouteMapTable table.
or
- The corresponding VSAN is deleted using the
vsanTable table (Defined in CISCO-VSAN-MIB)."
::= { ciscoPrefPathConfiguration 2 }
cPrefPathRouteMapGlobalEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapGlobalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the cPrefPathRouteMapGlobalTable table.
There is an entry in this table for each
fcroute-map created."
INDEX { cPrefPathRouteMapVsanIndex }
::= { cPrefPathRouteMapGlobalTable 1 }
CPrefPathRouteMapGlobalEntry ::= SEQUENCE {
cPrefPathRouteMapGlobalActive INTEGER
}
cPrefPathRouteMapGlobalActive OBJECT-TYPE
SYNTAX INTEGER {
all(1),
partial(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to activate/de-activate all the
routes within a fcroute-map.
This object is read-write for the values of 'all'
and 'none', but cannot be set to 'partial'.
If this object is set to 'all', then all the routes
within this fcroute-map will be activated.
If this object is set to 'none', then all routes
within this fcroute-map will be de-activated.
The value of 'partial' indicates that not all of
the routes within this fcroute-map are active.
This happens when some of the routes within this
fcroute-map is de-activated by using
cPrefPathRouteMapRouteActive object.
After the fcroute-map is activated, any incremental
updates or changes made to the match or set criteria
would require this object to be set to 'all' again
(re-activation)."
DEFVAL { none }
::= { cPrefPathRouteMapGlobalEntry 1 }
-- Route-Map Match Table
cPrefPathRouteMapMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows to configure and monitor
the match criteria for a route within a
fcroute-map created using the
cPrefPathRouteMapTable table.
Each match criteria allows user to classify a
traffic flow based on the the incoming frame's
source FC-ID and destination FC-ID match.
Each entry in this table is indexed by the
- cPrefPathRouteMapVsanIndex
- cPrefPathRouteMapRouteIndex
- cPrefPathRMapMatchSrcAddr
- cPrefPathRMapMatchSrcAddrMask
- cPrefPathRMapMatchSrcIntf
- cPrefPathRMapMatchDstAddr
- cPrefPathRMapMatchDstAddrMask
Note that any changes or updates made to the match
criteria would require the corresponding route
or the corresponding fcroute-map to be activated
again.
Entries in this table are created and deleted
using the cPrefPathRMapMatchRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRMapMatchRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a match criteria for a route within a
fcroute-map.
To delete a row in this table, a manager must
set the cPrefPathRMapMatchRowStatus object
to 'destroy'.
This table is dependent on cPrefPathRouteMapTable
table. The association between this table and
cPrefPathRouteMapTable table is through the common
indices - cPrefPathRouteMapRouteIndex and
cPrefPathRouteMapVsanIndex.
All the entries in this table with the indices -
cPrefPathRouteMapVsanIndex and
cPrefPathRouteMapRouteIndex is in fact the match
criteria or the flows associated with the route
within a fcroute-map for a VSAN, which are created
and activated using the cPrefPathRouteMapTable table.
When the row corresponding to indices -
cPrefPathRouteMapVsanIndex and
cPrefPathRouteMapRouteIndex in
the cPrefPathRouteMapTable is destroyed then all
the rows in this table with those indices will be
destroyed."
::= { ciscoPrefPathConfiguration 3 }
cPrefPathRouteMapMatchEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
There is an entry in this table for each
match criteria of a route within a
fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex,
cPrefPathRMapMatchSrcAddr,
cPrefPathRMapMatchSrcAddrMask,
cPrefPathRMapMatchSrcIntf,
cPrefPathRMapMatchDstAddr,
cPrefPathRMapMatchDstAddrMask }
::= { cPrefPathRouteMapMatchTable 1 }
CPrefPathRouteMapMatchEntry ::= SEQUENCE {
cPrefPathRMapMatchSrcAddr FcAddressId,
cPrefPathRMapMatchSrcAddrMask CiscoPrefPathFcAddrMask,
cPrefPathRMapMatchSrcIntf InterfaceIndexOrZero,
cPrefPathRMapMatchDstAddr FcAddressId,
cPrefPathRMapMatchDstAddrMask CiscoPrefPathFcAddrMask,
cPrefPathRMapMatchRowStatus RowStatus
}
cPrefPathRMapMatchSrcAddr OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The FC-ID which need to be matched with source
address in a frame for the flow classification."
::= { cPrefPathRouteMapMatchEntry 1 }
cPrefPathRMapMatchSrcAddrMask OBJECT-TYPE
SYNTAX CiscoPrefPathFcAddrMask
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the mask associated with
the source address represented by
cPrefPathRMapMatchSrcAddr.
The value of this object is meaningful only
if the corresponding instance of
cPrefPathRMapMatchSrcAddr contains a valid FC-ID."
::= { cPrefPathRouteMapMatchEntry 2 }
cPrefPathRMapMatchSrcIntf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an interface on the
local device on which a frame should arrive
for flow classification.
The value of 0 indicates that source interface
match is not selected."
::= { cPrefPathRouteMapMatchEntry 3 }
cPrefPathRMapMatchDstAddr OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The FC-ID which need to be matched with
destination address in a frame for flow
classification."
::= { cPrefPathRouteMapMatchEntry 4 }
cPrefPathRMapMatchDstAddrMask OBJECT-TYPE
SYNTAX CiscoPrefPathFcAddrMask
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the mask associated with
the destination address represented by
cPrefPathRMapMatchDstAddr.
The value of this object is meaningful only if the
corresponding instance of cPrefPathRMapMatchDstAddr
contains a valid FC-ID."
::= { cPrefPathRouteMapMatchEntry 5 }
cPrefPathRMapMatchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no need to configure instances of other
corresponding columnar objects in order to make the
newly created row to active.
Instances of all other corresponding columns can be
modified for an active row."
::= { cPrefPathRouteMapMatchEntry 6 }
-- Route-Map Set Table
cPrefPathRouteMapSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows to configure and monitor
the set criteria for a route within a
fcroute-map created using the
cPrefPathRouteMapTable table.
Each set criteria allows user to setup an action
on the classified or matched traffic flow created
using the cPrefPathRouteMapMatchTable table.
Each set criteria allows user to setup an outgoing
interface, and associate it with a preference level.
Preference level indicates the priority of the
interface during the selection in case multiple
outgoing interfaces are configured.
Match criteria configured using the
cPrefPathRouteMapMatchTable table for a route
within a fcroute-map and the set criteria
(this table) configured for the same route within
a fcroute-map go together as (match, set) pair.
Which means that those matched traffic
flows will be forwarded or routed via the interface
selected based on the preference level in the set
criteria (this table).
Each entry in this table is indexed by the
- cPrefPathRouteMapVsanIndex
- cPrefPathRouteMapRouteIndex
- cPrefPathRMapSetIntfPref
Note any changes or updates made to the set
criteria would require the corresponding route
or the corresponding fcroute-map to be activated
again.
Entries in this table are created and deleted
using the cPrefPathRMapSetRowStatus object.
To create a row in this table, a manager must
set the cPrefPathRMapSetRowStatus object
to 'createAndGo' or 'createAndWait'. This will
create a set criteria for a route within a
fcroute-map. It is required to configure instances
of cPrefPathRMapSetIntf column before or
concurrently in order to make the newly created
row to active.
To delete a row in this table, a manager must
set the cPrefPathRMapSetRowStatus object
to 'destroy'.
This table is dependent on cPrefPathRouteMapTable
table. The association between this table and the
cPrefPathRouteMapTable table is through the common
indices - cPrefPathRouteMapVsanIndex and
cPrefPathRouteMapVsanIndex. All the entries in this
table with the indices - cPrefPathRouteMapVsanIndex
and cPrefPathRouteMapRouteIndex is in fact the set
criteria associated with the route within a
fcroute-map, which are created and activated in the
cPrefPathRouteMapTable Table.
When the row corresponding to indices -
cPrefPathRouteMapVsanIndex and
cPrefPathRouteMapRouteIndex in
the cPrefPathRouteMapTable is destroyed then all
the rows in this table with those indices will be
destroyed."
::= { ciscoPrefPathConfiguration 4 }
cPrefPathRouteMapSetEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
There is an entry in this table for each
set criteria of a route within a fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex,
cPrefPathRMapSetIntfPref }
::= { cPrefPathRouteMapSetTable 1 }
CPrefPathRouteMapSetEntry ::= SEQUENCE {
cPrefPathRMapSetIntfPref CiscoPrefPathPreferenceLevel,
cPrefPathRMapSetIntf InterfaceIndex,
cPrefPathRMapSetIvrNextHopVsanId CiscoPrefPathIvrNextHopVsanId,
cPrefPathRMapSetRowStatus RowStatus
}
cPrefPathRMapSetIntfPref OBJECT-TYPE
SYNTAX CiscoPrefPathPreferenceLevel
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Preference level, which indicates the metric
or cost, associated with the
cPrefPathRMapSetIntf outgoing interface.
The lower the number the higher the preference."
::= { cPrefPathRouteMapSetEntry 1 }
cPrefPathRMapSetIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents an interface on the
local device on which the matched or classified
frame will be forwarded."
::= { cPrefPathRouteMapSetEntry 2 }
cPrefPathRMapSetIvrNextHopVsanId OBJECT-TYPE
SYNTAX CiscoPrefPathIvrNextHopVsanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the IVR next hop VSAN ID."
DEFVAL { 0 }
::= { cPrefPathRouteMapSetEntry 3 }
cPrefPathRMapSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
It is required to configure instances of
cPrefPathRMapSetIntf column before or concurrently
in order to make the newly created row to active.
Instances of all other corresponding columns can be
modified for an active row."
::= { cPrefPathRouteMapSetEntry 4 }
-- Preferred Path Route Information Table
cPrefPathRouteMapInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information of the
'preferred path' that is currently active and
selected for a route within a fcroute-map.
The 'preferred path' is the selected preference
level, and its associated interface which will be
the outgoing interface for traffic that are
classified using the match criteria in that
particular indexed fcroute-map route.
Each entry in this table is indexed by
- cPrefPathRouteMapVsanIndex
- cPrefPathRouteMapRouteIndex
For each route in a fcroute-map, preferred path
selects a preference level (the lower the number
the higher the preference) per VSAN based on link
status of interface associated with the
preference level. This table contains the
information of the selected preference level."
::= { ciscoPrefPathInformation 1 }
cPrefPathRouteMapInfoEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry which contains information about
the preferred path of a route within a
fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex }
::= { cPrefPathRouteMapInfoTable 1 }
CPrefPathRouteMapInfoEntry ::= SEQUENCE {
cPrefPathRMapSelectedPref CiscoPrefPathPreferenceLevel,
cPrefPathRMapSelectedIntf InterfaceIndex,
cPrefPathRMapSelIvrNextHopVsanId CiscoPrefPathIvrNextHopVsanId
}
cPrefPathRMapSelectedPref OBJECT-TYPE
SYNTAX CiscoPrefPathPreferenceLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selected preference level."
::= { cPrefPathRouteMapInfoEntry 1 }
cPrefPathRMapSelectedIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an interface on the
local device which is selected to forward
the classified or matched flow."
::= { cPrefPathRouteMapInfoEntry 2 }
cPrefPathRMapSelIvrNextHopVsanId OBJECT-TYPE
SYNTAX CiscoPrefPathIvrNextHopVsanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IVR next hop VSAN ID."
::= { cPrefPathRouteMapInfoEntry 3 }
-- Route-Map Match Info Table
cPrefPathRouteMapMatchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapMatchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows to monitor the status of the
the match criteria of the route within a
fcroute-map that are activated using the
cPrefPathRouteMapGlobalActive or
cPrefPathRouteMapRouteActive objects.
Each match criteria entry in this table is indexed
by
- cPrefPathRouteMapVsanIndex
- cPrefPathRouteMapRouteIndex
- cPrefPathRMapMatchSrcAddr
- cPrefPathRMapMatchSrcAddrMask
- cPrefPathRMapMatchSrcIntf
- cPrefPathRMapMatchDstAddr
- cPrefPathRMapMatchDstAddrMask"
::= { ciscoPrefPathInformation 2 }
cPrefPathRouteMapMatchInfoEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapMatchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry which contains information about the
match criteria of an 'active' route within a
fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex,
cPrefPathRMapMatchSrcAddr,
cPrefPathRMapMatchSrcAddrMask,
cPrefPathRMapMatchSrcIntf,
cPrefPathRMapMatchDstAddr,
cPrefPathRMapMatchDstAddrMask }
::= { cPrefPathRouteMapMatchInfoTable 1 }
CPrefPathRouteMapMatchInfoEntry ::= SEQUENCE {
cPrefPathRMapMatchStatus CiscoPrefPathStatus
}
cPrefPathRMapMatchStatus OBJECT-TYPE
SYNTAX CiscoPrefPathStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the indexed match entry."
::= { cPrefPathRouteMapMatchInfoEntry 1 }
-- Route-Map Set Info Table
cPrefPathRouteMapSetInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPrefPathRouteMapSetInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows to monitor the status of the
the set criteria of the route within a
fcroute-map that are activated using the
cPrefPathRouteMapGlobalActive or
cPrefPathRouteMapRouteActive objects.
Each entry in this table is indexed by
- cPrefPathRouteMapVsanIndex
- cPrefPathRouteMapRouteIndex
- cPrefPathRMapSetIntfPref."
::= { ciscoPrefPathInformation 3 }
cPrefPathRouteMapSetInfoEntry OBJECT-TYPE
SYNTAX CPrefPathRouteMapSetInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry which contains information about the
set criteria of an 'active' route within a
fcroute-map."
INDEX { cPrefPathRouteMapVsanIndex,
cPrefPathRouteMapRouteIndex,
cPrefPathRMapSetIntfPref }
::= { cPrefPathRouteMapSetInfoTable 1 }
CPrefPathRouteMapSetInfoEntry ::= SEQUENCE {
cPrefPathRouteMapSetInfoIntf InterfaceIndex,
cPrefPathRouteMapSetInfoIvrNextHopVId
CiscoPrefPathIvrNextHopVsanId,
cPrefPathRouteMapSetStatus CiscoPrefPathStatus
}
cPrefPathRouteMapSetInfoIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents an interface on the
local device on which the matched or classified
frame will be forwarded."
::= { cPrefPathRouteMapSetInfoEntry 1 }
cPrefPathRouteMapSetInfoIvrNextHopVId OBJECT-TYPE
SYNTAX CiscoPrefPathIvrNextHopVsanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IVR next hop VSAN ID."
::= { cPrefPathRouteMapSetInfoEntry 2 }
cPrefPathRouteMapSetStatus OBJECT-TYPE
SYNTAX CiscoPrefPathStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the indexed set entry."
::= { cPrefPathRouteMapSetInfoEntry 3 }
-- Notification configuration
cPrefPathHwFailureNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces
the ciscoPrefPathHWFailureNotify.
A 'false' value for this object will prevent
ciscoPrefPathHWFailureNotify notification being
generated by the device."
::= { ciscoPrefPathConfiguration 5 }
-- Notifications
ciscoPrefPathHWFailureNotify NOTIFICATION-TYPE
OBJECTS {
notifyVsanIndex
}
STATUS current
DESCRIPTION
"This notification is generated whenever the
local device encounters some hardware failures
during programming of local preferred path
configuration."
::= { ciscoPrefPathMIBNotifs 1 }
-- Conformance
ciscoPrefPathMIBCompliances OBJECT IDENTIFIER
::= { ciscoPrefPathMIBConform 1 }
ciscoPrefPathMIBGroups OBJECT IDENTIFIER
::= { ciscoPrefPathMIBConform 2 }
ciscoPrefPathMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-PREFERRED-PATH-MIB."
MODULE MANDATORY-GROUPS {
ciscoPrefPathConfigGroup,
ciscoPrefPathInfoGroup,
ciscoPrefPathNotifyGroup,
ciscoPrefPathNotifyConfigGroup
}
OBJECT cPrefPathRouteMapStorageType
SYNTAX INTEGER {
volatile(2)
}
DESCRIPTION
"Only one value 'volatile' out of the five
enumerated values need to be supported."
OBJECT cPrefPathRouteMapRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT cPrefPathRMapMatchRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT cPrefPathRMapSetRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
::= { ciscoPrefPathMIBCompliances 1 }
ciscoPrefPathMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-PREFERRED-PATH-MIB."
MODULE MANDATORY-GROUPS {
ciscoPrefPathConfigGroupRev1,
ciscoPrefPathInfoGroup,
ciscoPrefPathNotifyGroup,
ciscoPrefPathNotifyConfigGroup
}
OBJECT cPrefPathRouteMapStorageType
SYNTAX INTEGER {
volatile(2)
}
DESCRIPTION
"Only one value 'volatile' out of the five
enumerated values need to be supported."
OBJECT cPrefPathRouteMapRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT cPrefPathRMapMatchRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT cPrefPathRMapSetRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
::= { ciscoPrefPathMIBCompliances 2 }
-- Units of conformance
ciscoPrefPathConfigGroup OBJECT-GROUP
OBJECTS {
cPrefPathRMapSetIntf,
cPrefPathRMapSetIvrNextHopVsanId,
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapActive,
cPrefPathRouteMapStorageType,
cPrefPathRouteMapRowStatus,
cPrefPathRMapMatchRowStatus,
cPrefPathRMapSetRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects for configuring
and displaying Preferred Path parameters."
::= { ciscoPrefPathMIBGroups 1 }
ciscoPrefPathInfoGroup OBJECT-GROUP
OBJECTS {
cPrefPathRMapSelectedPref,
cPrefPathRMapSelectedIntf,
cPrefPathRMapSelIvrNextHopVsanId,
cPrefPathRMapMatchStatus,
cPrefPathRouteMapSetInfoIntf,
cPrefPathRouteMapSetInfoIvrNextHopVId,
cPrefPathRouteMapSetStatus
}
STATUS current
DESCRIPTION
"A collection of objects for providing
information for preferred path notifications."
::= { ciscoPrefPathMIBGroups 2 }
ciscoPrefPathNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoPrefPathHWFailureNotify
}
STATUS current
DESCRIPTION
"A collection of notifications for
monitoring failure in configuring Preferred Path
parameters on the local device."
::= { ciscoPrefPathMIBGroups 3 }
ciscoPrefPathNotifyConfigGroup OBJECT-GROUP
OBJECTS {
cPrefPathHwFailureNotifEnable
}
STATUS current
DESCRIPTION
"A collection of objects for displaying and
configuring preferred path notifications."
::= { ciscoPrefPathMIBGroups 4 }
ciscoPrefPathConfigGroupRev1 OBJECT-GROUP
OBJECTS {
cPrefPathRouteMapGlobalActive,
cPrefPathRMapSetIntf,
cPrefPathRMapSetIvrNextHopVsanId,
cPrefPathRouteMapIntfPrefStrict,
cPrefPathRouteMapRouteActive,
cPrefPathRouteMapStorageType,
cPrefPathRouteMapRowStatus,
cPrefPathRMapMatchRowStatus,
cPrefPathRMapSetRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for configuring
and displaying Preferred Path parameters."
::= { ciscoPrefPathMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink