MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-POP-MGMT-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2048 lines
63 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-POP-MGMT-MIB.my: Cisco PoP management MIB file.
--
-- Copyright (c) 1997, 1998, 1999, 2000, 2001, 2005 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-POP-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
IpAddress,
Integer32,
Gauge32,
Counter32,
TimeTicks,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString,
TimeStamp,
TruthValue
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB
dsx1LineStatus,
dsx1LineIndex
FROM DS1-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoPopMgmtMIB MODULE-IDENTITY
LAST-UPDATED "200512210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-apm@cisco.com"
DESCRIPTION
"Cisco Point Of Presence Management MIB to provide DSX1
and DSX0 facilities management and call summaries."
REVISION "200512210000Z"
DESCRIPTION
"Imported dsx1LineIndex from DS1-MIB instead of
RFC1406-MIB
Changed SYNTAX of
cpmDS1SlotIndex
cpmDS1PortIndex
cpmChannelIndex
cpmDS1UsageSlotIndex
cpmDS1UsagePortIndex
cpmActiveCallSummaryIndex
cpmCallHistorySummaryIndex
cpmActiveModemSlot
cpmActiveModemPort
cpmActiveEntrySlot
cpmActiveEntryPort
cpmActiveEntryChannel
from Integer32 to Integer32 (0..2147483647)
Imported Unsigned32 from SNMPv2-SMI instead of
CISCO-TC."
REVISION "200212260000Z"
DESCRIPTION
"Added voice(6) to object cpmCallType.
Added Notification Group cpmNotificationGroupRev1"
REVISION "200011290000Z"
DESCRIPTION
"Added cpmCallVolume with objects:
cpmCallVolSuccISDNDigital
cpmCallVolAnalogCallClearedNormally"
REVISION "200003030000Z"
DESCRIPTION
"Extended cpmDs1DS0UsageTable with objects:
cpmDS1TotalAnalogCalls
cpmDS1TotalDigitalCalls
cpmDS1TotalV110Calls
cpmDS1TotalV120Calls
cpmDS1TotalCalls
cpmDS1TotalTimeInUse
cpmDS1CurrentIdle
cpmDS1CurrentOutOfService
cpmDS1CurrentBusyout
cpmDS1InOctets
cpmDS1OutOctets
cpmDS1InPackets
cpmDS1OutPackets
Added system level summary objects:
cpmISDNCfgActiveDChannels
cpmISDNCfgBChannelsTimeInUse
cpmISDNCfgBChannelsTimeInUseAnalog
cpmISDNCfgBChannelCalls
cpmISDNCfgBChannelAnalogCalls
cpmTotalISDNSyncPPPCalls
Added DS0StatusTable with objects:
cpmDS0OperStatus
cpmDS0BusyoutAdminStatus
cpmDS0BusyoutAllow
cpmDS0BusyoutStatus
cpmDS0BusyoutSource
cpmDS0BusyoutTime
cpmDS0ConfigFunction
cpmDS0InterfaceIndex
Added busyout notification and
notification enable object:
cpmDS0BusyoutNotification
cpmDS0BusyoutNotifyEnable
cpmDS1LoopbackNotifyConfig
cpmDS1LoopbackNotifyEnable
cpmDS1LoopbackNotification
"
REVISION "9802020000Z"
DESCRIPTION
"Added objects:
cpmISDNCfgBChanInUseForVoice
cpmCASCfgBChanInUseForVoice
Added enumeration-type:
voice"
REVISION "9710210000Z"
DESCRIPTION
"Added objects:
cpmDS1DS0UsageTable
cpmActiveDS0sHighWaterMark
cpmSW56CfgBChannelsInUse"
REVISION "9705010000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoExperiment 19 }
ciscoPopMgmtMIBObjects OBJECT IDENTIFIER ::= { ciscoPopMgmtMIB 1 }
cpmDS0Usage OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 1 }
cpmCallFailure OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 2 }
cpmActiveCallSummary OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 3 }
cpmCallHistorySummary OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 4 }
cpmDS0Status OBJECT IDENTIFIER ::= { ciscoPopMgmtMIBObjects 5 }
cpmDS1LoopbackNotifyConfig OBJECT IDENTIFIER ::=
{ ciscoPopMgmtMIBObjects 6 }
cpmCallVolume OBJECT IDENTIFIER ::=
{ ciscoPopMgmtMIBObjects 7 }
-- cpmDS0Usage
cpmDS0UsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmDS0UsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DS0 usage table is for hardware and software
objects not used as interfaces, and not covered in
rfc1213. These objects include analog calls coming
over ISDN, Channelized T1, and Channelized E1. This
table is created for every DS1 line in the device."
::= { cpmDS0Usage 1 }
cpmDS0UsageEntry OBJECT-TYPE
SYNTAX CpmDS0UsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DS0 Usage table."
INDEX {cpmDS1SlotIndex, cpmDS1PortIndex, cpmChannelIndex }
::= { cpmDS0UsageTable 1 }
CpmDS0UsageEntry ::= SEQUENCE {
cpmDS1SlotIndex Integer32,
cpmDS1PortIndex Integer32,
cpmChannelIndex Integer32,
cpmConfiguredType INTEGER,
cpmDS0CallType INTEGER,
cpmL2Encapsulation INTEGER,
cpmCallCount Counter32,
cpmTimeInUse TimeTicks,
cpmInOctets Counter32,
cpmOutOctets Counter32,
cpmInPackets Counter32,
cpmOutPackets Counter32,
cpmAssociatedInterface InterfaceIndexOrZero
}
cpmDS1SlotIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot index indicates the slot number on the
device where the DS1 card resides."
::= { cpmDS0UsageEntry 1 }
cpmDS1PortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index indicates the port number of a
specific DS1 on the DS1 card in the slot"
::= { cpmDS0UsageEntry 2 }
cpmChannelIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The channel index that distinguishes the DS0 timeslot
of the DS1 port. The range of the channel index is based
on the number of T1/E1 channels: 1-24(T1) and 1-31(E1)."
::= { cpmDS0UsageEntry 3 }
cpmConfiguredType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
isdn(2),
ct1(3),
ce1(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured technology for the channel: ISDN(2),
Channelized T1 (3) or Channelized E1 (4)."
::= { cpmDS0UsageEntry 4 }
cpmDS0CallType OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
unknown(2),
analog(3),
digital(4),
v110(5),
v120(6),
voice(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the current call carried by this DS0.
idle - This DS0 is currently idle.
unknown - The data type of the call currently
occupying this DS0 is not one of the
types listed here.
analog - The data type of the call currently
occupying this DS0 is analog, i.e. a
modem call.
digital - The data type of the call currently
occupying this DS0 is digital.
v110 - The call currently occupying this
DS0 is a V110 call.
v120 - The call currently occupying this
DS0 is a V120 call.
voice - The call currently occupying this
DS0 is a voice call."
::= { cpmDS0UsageEntry 5 }
cpmL2Encapsulation OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
unknown(2),
ppp(3),
slip(4),
arap(5),
hdlc(6),
exec(7),
voice(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data link encapsulation of the call currently
occuppying this DS0:
idle - This DS0 is currently idle.
unknown - The encapsulation of the currently
active call on this DS0 is not one
of the options following.
PPP -
slip -
arap -
hdlc -
exec -
voice - voice encapsulation; IANA type voiceEncap(103)"
::= { cpmDS0UsageEntry 6 }
cpmCallCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls that have occupied this DS0."
::= { cpmDS0UsageEntry 7 }
cpmTimeInUse OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time that this DS0 has been in use.
This is computed by summing up the call durations
of all past calls that have occupied this DS0."
::= { cpmDS0UsageEntry 8 }
cpmInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the
received 'raw' octets are counted, including any
protocol headers which may or may not be present,
depending on the service type of data call."
::= { cpmDS0UsageEntry 9 }
cpmOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the
transmitted 'raw' octets are counted, including any
protocol headers which may or may not be present,
depending on the service type of data call."
::= { cpmDS0UsageEntry 10 }
cpmInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)')."
::= { cpmDS0UsageEntry 11 }
cpmOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)')."
::= { cpmDS0UsageEntry 12 }
cpmAssociatedInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of ifIndex when the specific channel
has an active call with a corresponding interface in the
ifTable. For example, a digital ISDN call has a value
pointing to the B-Channel entry in the ifTable. A
modem call over ISDN or CT1/CE1 has a value pointing
to the async interface of the modem assigned to this
call. If the channel is idle, this value is 0."
::= { cpmDS0UsageEntry 13 }
-- End of cpmDS0UsageTable
cpmISDNCfgBChanInUseForAnalog OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured ISDN B-Channels that are
currently occupied by analog calls."
::= { cpmDS0Usage 2 }
cpmISDNCfgBChannelsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured ISDN B-Channels that are
currently occupied by both Digital and Analog calls."
::= { cpmDS0Usage 3 }
cpmActiveDS0s OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DS0s that are currently in use."
::= { cpmDS0Usage 4 }
cpmPPPCalls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active PPP calls received
by the managed device"
::= { cpmDS0Usage 5 }
cpmV120Calls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active V.120 calls received
by the managed device"
::= { cpmDS0Usage 6 }
cpmV110Calls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active V.110 calls received
by the managed device"
::= { cpmDS0Usage 7 }
cpmActiveDS0sHighWaterMark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high water mark for number of DS0s that are active
simultaneously"
::= { cpmDS0Usage 8 }
--
-- DS1 Level Statistics Aggregation
--
cpmDS1DS0UsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmDS1DS0UsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DS1-DS0-usage table is for hardware and software
objects not used as interfaces, and not covered in
rfc1213. These objects provide information on timeslots
usage for a particular DS1."
::= { cpmDS0Usage 9 }
cpmDS1DS0UsageEntry OBJECT-TYPE
SYNTAX CpmDS1DS0UsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DS0 Usage table."
INDEX {cpmDS1UsageSlotIndex, cpmDS1UsagePortIndex }
::= { cpmDS1DS0UsageTable 1 }
CpmDS1DS0UsageEntry ::= SEQUENCE {
cpmDS1UsageSlotIndex Integer32,
cpmDS1UsagePortIndex Integer32,
cpmDS1ActiveDS0s Gauge32,
cpmDS1ActiveDS0sHighWaterMark Counter32,
cpmDS1TotalAnalogCalls Counter32,
cpmDS1TotalDigitalCalls Counter32,
cpmDS1TotalV110Calls Counter32,
cpmDS1TotalV120Calls Counter32,
cpmDS1TotalCalls Counter32,
cpmDS1TotalTimeInUse Unsigned32,
cpmDS1CurrentIdle Gauge32,
cpmDS1CurrentOutOfService Gauge32,
cpmDS1CurrentBusyout Gauge32,
cpmDS1InOctets Counter32,
cpmDS1OutOctets Counter32,
cpmDS1InPackets Counter32,
cpmDS1OutPackets Counter32
}
cpmDS1UsageSlotIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot index indicates the slot number on the
device where the DS1 card resides. The slot index of
the first slot is starting from 0 and increment by 1 for
the next slot in the device."
::= { cpmDS1DS0UsageEntry 1 }
cpmDS1UsagePortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index indicates the port number of a
specific DS1 on the DS1 card in the slot. The port index
of the first port is starting from 0 and increment by 1
for the next port on the DS1 card."
::= { cpmDS1DS0UsageEntry 2 }
cpmDS1ActiveDS0s OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DS0s that are currently in use for a
particular DS1."
::= { cpmDS1DS0UsageEntry 3 }
cpmDS1ActiveDS0sHighWaterMark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of simultaneously actived DS0s on a
specified DS1."
::= { cpmDS1DS0UsageEntry 4 }
cpmDS1TotalAnalogCalls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of analog data calls
(cpmDS0CallType has the value 'analog(3)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls."
::= { cpmDS1DS0UsageEntry 5 }
cpmDS1TotalDigitalCalls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of digital data calls
(cpmDS0CallType has the value 'digital(4)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls."
::= { cpmDS1DS0UsageEntry 6 }
cpmDS1TotalV110Calls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of v.110 data calls
(cpmDS0CallType has the value 'v110(5)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls."
::= { cpmDS1DS0UsageEntry 7 }
cpmDS1TotalV120Calls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of v.120 data calls
(cpmDS0CallType has the value 'v120(6)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls."
::= { cpmDS1DS0UsageEntry 8 }
cpmDS1TotalCalls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of calls on all the DS0s within
this DS1 since last system re-initialization. The
object includes active and terminated calls.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel."
::= { cpmDS1DS0UsageEntry 9 }
cpmDS1TotalTimeInUse OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total call duration on all the DS0s within
this DS1 since last system re-initialization.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel."
::= { cpmDS1DS0UsageEntry 10 }
cpmDS1CurrentIdle OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0s currently in idle state within
this DS1.
This only includes DS0s configured as bearer and CAS channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0OperStatus in the cpmDS0StatusTable for individual
DS0s."
::= { cpmDS1DS0UsageEntry 11 }
cpmDS1CurrentOutOfService OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0s in this DS1 currently placed
out of service.
This only includes DS0s configured as bearer and CAS channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0OperStatus in the cpmDS0StatusTable for individual
DS0s."
::= { cpmDS1DS0UsageEntry 12 }
cpmDS1CurrentBusyout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DS0s in this DS1 which currently have
been requested to be busied out, but are not yet out of
service.
When an active call on a busied out DS0 terminates,
the DS0 will be out of service, this object will be
decremented and cpmDS1TotalOutOfService will be
incremented.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0AdminStatus in the cpmDS0StatusTable for individual
DS0s."
::= { cpmDS1DS0UsageEntry 13 }
cpmDS1InOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmInOctets objects in
the cpmDS0UsageTable for this DS1."
::= { cpmDS1DS0UsageEntry 14 }
cpmDS1OutOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmOutOctets objects in
the cpmDS0UsageTable for this DS1."
::= { cpmDS1DS0UsageEntry 15 }
cpmDS1InPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data packets received over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmInPackets objects in
the cpmDS0UsageTable for this DS1. It consists of PPP
or PCM voice data packets."
::= { cpmDS1DS0UsageEntry 16 }
cpmDS1OutPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data packets transmitted over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmOutPackets objects in
the cpmDS0UsageTable for this DS1. It consists of PPP
or PCM voice data packets."
::= { cpmDS1DS0UsageEntry 17 }
-- End of cpmDS1DS0UsageTable
--
-- Additional System Level Statistics
--
cpmSW56CfgBChannelsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured SW56 B-Channels that are
currently occupied by Digital calls."
::= { cpmDS0Usage 10 }
cpmISDNCfgBChanInUseForVoice OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured ISDN B-Channels that are
currently occupied by Voice calls."
::= { cpmDS0Usage 11 }
cpmCASCfgBChanInUseForVoice OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured CAS Channels that are
currently occupied by Voice calls."
::= { cpmDS0Usage 12 }
cpmISDNCfgActiveDChannels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN signaling channels which are active."
::= { cpmDS0Usage 13 }
cpmISDNCfgBChannelsTimeInUse OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total call duration on all the ISDN B-channels
since last system re-initialization."
::= { cpmDS0Usage 14 }
cpmISDNCfgBChannelsTimeInUseAnlg OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total analog call duration on all the ISDN B-channels
since last system re-initialization.
Analog call type is identified in cpmDS0CallType."
::= { cpmDS0Usage 15 }
cpmISDNCfgBChannelCalls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of calls on all the ISDN B-channels
since last system re-initialization."
::= { cpmDS0Usage 16 }
cpmISDNCfgBChannelAnalogCalls OBJECT-TYPE
SYNTAX Counter32
UNITS "calls"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of analog calls on all the ISDN B-channels
since last system re-initialization.
Analog call type is identified in cpmDS0CallType."
::= { cpmDS0Usage 17 }
cpmTotalISDNSyncPPPCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ISDN-sync PPP calls received
by the managed device since last system re-initialization."
::= { cpmDS0Usage 18 }
--
-- DS0 Status Group
--
-- Notification Configuration
cpmDS0BusyoutNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls generation of
cpmDS0BusyoutNotification.
When this variable is 'true(1)', generation of
cpmDS0BusyoutNotification is enabled. When this
variable is 'false(2)', generation of
cpmDS0BusyoutNotification is disabled.
The default value is 'false(2)'.
"
::= { cpmDS0Status 1 }
cpmDS0StatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmDS0StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DS0 Status Table provides additional DS0 level
information and configuration.
This table is an extension of the cpmDS0UsageTable.
"
::= { cpmDS0Status 2 }
cpmDS0StatusEntry OBJECT-TYPE
SYNTAX CpmDS0StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status for an individual DS0.
This entry AUGMENTS the cpmDS0UsageEntry.
An entry exists for each configured DS0 in the system.
"
AUGMENTS { cpmDS0UsageEntry }
::= { cpmDS0StatusTable 1 }
CpmDS0StatusEntry ::= SEQUENCE {
cpmDS0OperStatus INTEGER,
cpmDS0BusyoutAdminStatus INTEGER,
cpmDS0BusyoutAllow TruthValue,
cpmDS0BusyoutStatus INTEGER,
cpmDS0BusyoutSource INTEGER,
cpmDS0BusyoutTime TimeStamp,
cpmDS0ConfigFunction INTEGER,
cpmDS0InterfaceIndex InterfaceIndexOrZero
}
cpmDS0OperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
down(2),
idle(3),
setup(4),
connected(5),
test(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the DSO.
This object provides more detailed information than
the IF-MIB ifOperStatus.
unknown - The DSO is in an unknown state
down - The DS0 is out of service
idle - This DS0 is currently idle
setup - A new connection is in the process
of being established
connected - A active connection exists
test - The DSO is undergoing internal testing
"
::= { cpmDS0StatusEntry 1 }
cpmDS0BusyoutAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
noBusyout(1),
busyout(2),
busyoutImmediate(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively requested busyout state of the DSO.
This object represents the desired busyout state of the DS0,
which may or may not be reflected in the operation state,
cpmDS0OperStatus.
This object may be set via SNMP or the system console.
noBusyout - No administrative busyout has been requested
busyout - The DS0 will be shutdown when it next
transitions to idle(2) cpmDS0OperStatus
busyoutImmediate -
Immediately transition the DS0 to down(2),
terminating any current activity
The effect of setting this object to busyout or
busyoutImmediate is constrained by the value of
cpmDS0BusyoutAllowed. If cpmDS0BusyoutAllowed has a value
of false, attempting to set this object to busyout or
busyoutImmediate will fail.
This object provides more busyout information not available
from the IF-MIB ifAdminStatus.
This object reflects busyout requests configured on the
local system as defined for the object cpmDS0BusyoutSource.
"
::= { cpmDS0StatusEntry 2 }
cpmDS0BusyoutAllow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates if busyout requests for this DSO
will be allowed.
true - Setting cpmDS0BusyoutAdminStatus to busyout(2)
or busyoutImmediate(3) will be accepted
false - Busyout requests for this DS0 are not
allowed
The default value is true(1).
If cpmDS0BusyoutAllowed has a value of false(2), attempting
to set cpmDS0BusyoutAdminStatus to busyout or
busyoutImmediate will fail.
This object only constrains setting the value of
cpmDS0BusyoutAdminStatus when cpmDS0BusyoutAdminStatus is set
via SNMP.
"
::= { cpmDS0StatusEntry 3 }
cpmDS0BusyoutStatus OBJECT-TYPE
SYNTAX INTEGER {
noBusyout(1),
busyoutPending(2),
busiedOut(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The busyout status of the DSO.
noBusyout - The DS0 is not busied out nor has a
busyout pending.
busyoutPending - The DS0 has a busyout request pending. It
will shutdown when it next transitions
to idle(2) cpmDS0OperStatus.
busiedOut - The DS0 is out of service due to a busyout
request.
This object is needed to reflect busyouts initiated other than
administrativly, as described in cpmDS0BusyoutSource.
"
::= { cpmDS0StatusEntry 4 }
cpmDS0BusyoutSource OBJECT-TYPE
SYNTAX INTEGER {
none(1),
local(2),
internal(3),
remote(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of the busyout request either pending or
active for the DSO.
none - The DS0 is not busied out nor has a busyout
request pending
local - The DS0 is busied out or has a pending request
due to an adminstrative command issued locally.
internal - The DS0 is busied out or has a pending request
due to internal system processing.
remote - The DS0 is busied out or has a pending request
due to a request from the peer switch.
"
::= { cpmDS0StatusEntry 5 }
cpmDS0BusyoutTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the most recent busyout request
was issued for this DS0. The value is zero indicates no
busyout request has been issued.
"
::= { cpmDS0StatusEntry 6 }
cpmDS0ConfigFunction OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
t1CcsSignallingChan(2),
t1CcsBearerChan(3),
e1CcsSignallingChan(4),
e1CcsBearerChan(5),
t1CasChan(6),
e1CasChan(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the function this DSO is configured
to provide.
This object provides more detail than cpmConfiguredType.
unknown - Unknown configuration
t1SignallingChan - DS0 is configured as a T1 common channel
signalling (CCS) such as ISDN PRI
D-channel
t1CcsBearerChan - DS0 is configured as a T1 common channel
signalling (CCS) bearer channel
e1SignallingChan - DS0 is configured as a E1 common channel
signalling (CCS) such as ISDN PRI
D-channel
e1CcsBearerChan - DS0 is configured as a E1 common channel
signalling (CCS) bearer channel
t1CasChan - DS0 is configured as a T1 channel
associated signalling channel
e1CasChan - DS0 is configured as a E1 channel
associated signalling channel
"
::= { cpmDS0StatusEntry 7 }
cpmDS0InterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of ifIndex in the ifTable for this DS0."
::= { cpmDS0StatusEntry 8 }
-- cpmCallFailure
--
-- The objects in this section are optimizations so we don't have to
-- retrieve and count tables. We have examined existing call
-- termination conditions from the CISCO-CALL-HISTORY-MIB, and they
-- do not address the both ISDN and Modem terminations.
cpmISDNCallsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rejected ISDN calls in this managed
device."
::= { cpmCallFailure 1 }
cpmModemCallsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rejected modem calls in this managed
device."
::= { cpmCallFailure 2 }
cpmISDNCallsClearedAbnormally OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connected ISDN calls that have been
abnormally cleared, that is, they were cleared by some
event other than the following:
a - The transmission of a normal disconnect message by the
local end.
b - The reception of a normal disconnect message from the
remote end."
::= { cpmCallFailure 3 }
cpmModemCallsClearedAbnormally OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connected modem calls that have been abnormally
cleared, that is, they were not cleared with the proper modem
protocol handshakes."
::= { cpmCallFailure 4 }
cpmISDNNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN calls that have been rejected because
there is no B-Channel available to handle the call."
::= { cpmCallFailure 5 }
cpmModemNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of modem calls that have been rejected because
there is no modem available to handle the call."
::= { cpmCallFailure 6 }
-- cpmCallVolume
--
-- The objects in this section are optimizations so we don't have
-- to retrieve and count tables.
cpmCallVolSuccISDNDigital OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming and outgoing successful ISDN
digital data calls (cpmDS0CallType has the value
'digital(4)'), since system startup. A successful call is
a terminated call that has a disconnect cause of 'normal
call clearing(16)'."
::= { cpmCallVolume 1 }
cpmCallVolAnalogCallClearedNormally OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming and outgoing successful
analog data calls which use modem resource (cpmDS0CallType
has the value 'analog(3)'), since system startup. A
successful call is a terminated call who is cleared by the
proper modem protocol handshake."
::= { cpmCallVolume 2 }
-- cpmActiveCallSummary
cpmActiveCallSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmActiveCallSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The active call summary table is needed to track
currently active calls. This table is needed
because modem calls are not in CALL-HISTORY-MIB,
and the DIAL-CONTROL_MIB is not yet available."
::= { cpmActiveCallSummary 1 }
cpmActiveCallSummaryEntry OBJECT-TYPE
SYNTAX CpmActiveCallSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Call Summary table."
INDEX {cpmActiveCallStartTimeIndex, cpmActiveCallSummaryIndex }
::= { cpmActiveCallSummaryTable 1 }
CpmActiveCallSummaryEntry ::= SEQUENCE {
cpmActiveCallStartTimeIndex TimeStamp,
cpmActiveCallSummaryIndex Integer32,
cpmActiveUserID DisplayString,
cpmActiveUserIpAddr IpAddress,
cpmActiveCallType INTEGER,
cpmActiveModemSlot Integer32,
cpmActiveModemPort Integer32,
cpmActiveCallDuration TimeTicks,
cpmActiveEntrySlot Integer32,
cpmActiveEntryPort Integer32,
cpmActiveEntryChannel Integer32,
cpmActiveRemotePhoneNumber DisplayString,
cpmActiveLocalPhoneNumber DisplayString,
cpmActiveTTYNumber Integer32
}
cpmActiveCallStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The start time of the current call."
::= { cpmActiveCallSummaryEntry 1 }
cpmActiveCallSummaryIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arbitrary small integer to distinguish calls that occured
at the same time tick."
::= { cpmActiveCallSummaryEntry 2 }
cpmActiveUserID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User login ID or zero length string if unavailable."
::= { cpmActiveCallSummaryEntry 3 }
cpmActiveUserIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS."
::= { cpmActiveCallSummaryEntry 4 }
cpmActiveCallType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
analog(2),
digital(3),
v110(4),
v120(5),
voice(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call type:
unknown - None of the following
analog - Modem call
digital - Digital call
v110 - V110 Call
v120 - V120 Call
voice - Voice Call"
::= { cpmActiveCallSummaryEntry 5 }
cpmActiveModemSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmActiveModemPort uniquely identifies
a modem. Value is -1 if call does not utilize a modem."
::= { cpmActiveCallSummaryEntry 6 }
cpmActiveModemPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmActiveModemSlot uniquely identifies
a modem. Value is -1 if call does not utilize a modem."
::= { cpmActiveCallSummaryEntry 7 }
cpmActiveCallDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the current call."
::= { cpmActiveCallSummaryEntry 8 }
cpmActiveEntrySlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical slot in which the DS1 line that the user
connected on resides."
::= { cpmActiveCallSummaryEntry 9 }
cpmActiveEntryPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port for the DS1 line that the user connected on."
::= { cpmActiveCallSummaryEntry 10 }
cpmActiveEntryChannel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel within the DS1 that is allocated to the call."
::= { cpmActiveCallSummaryEntry 11 }
cpmActiveRemotePhoneNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote telephone number. For a call into the device,
this is the originating number. For a call out of the
device, this is the dialed number. If not available the
string length is zero."
::= { cpmActiveCallSummaryEntry 12 }
cpmActiveLocalPhoneNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local telephone number. For a call into the device,
this is the dialed number. For a call out of the
device, this is the originating number. If not available
the string length is zero."
::= { cpmActiveCallSummaryEntry 13 }
cpmActiveTTYNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTY number associated with this call. This
information comes from the IOS 'show line' command."
::= { cpmActiveCallSummaryEntry 14 }
-- cpmCallHistorySummary
cpmCallHistorySummaryTableMaxLength OBJECT-TYPE
SYNTAX Integer32 (0..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit on the number of entries that the
cpmCallHistoryTable may contain. A value of 0
will prevent any history from being retained. When
this table is full, the oldest entry will be deleted
and the new one will be created."
DEFVAL { 100 }
::= { cpmCallHistorySummary 1 }
cpmCallHistorySummaryRetainTimer OBJECT-TYPE
SYNTAX Integer32 (0..500)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum amount of time that an cpmCallHistoryEntry
will be maintained before being deleted. A value of
0 will prevent any history from being retained, but
will not prevent callCompletion traps being genarated."
DEFVAL { 15 }
::= { cpmCallHistorySummary 2 }
cpmCallHistorySummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpmCallHistorySummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The call history summary table is needed to track
ended active calls. This table is needed
because modem calls are not in CALL-HISTORY-MIB;
the CISCO-ISDN-MIB objects do not contain information
about the active calls; and the DIAL-CONTROL_MIB
is not yet available."
::= { cpmCallHistorySummary 3 }
cpmCallHistorySummaryEntry OBJECT-TYPE
SYNTAX CpmCallHistorySummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Call Summary table."
INDEX { cpmCallDisconnectTimeIndex,
cpmCallStartTimeIndex,
cpmCallHistorySummaryIndex }
::= { cpmCallHistorySummaryTable 1 }
CpmCallHistorySummaryEntry ::= SEQUENCE {
cpmCallDisconnectTimeIndex TimeStamp,
cpmCallStartTimeIndex TimeStamp,
cpmCallHistorySummaryIndex Integer32,
cpmUserID DisplayString,
cpmUserIpAddr IpAddress,
cpmCallType INTEGER,
cpmModemSlot Integer32,
cpmModemPort Integer32,
cpmCallDuration TimeTicks,
cpmEntrySlot Integer32,
cpmEntryPort Integer32,
cpmEntryChannel Integer32,
cpmRemotePhoneNumber DisplayString,
cpmLocalPhoneNumber DisplayString,
cpmTTYNumber Integer32
}
cpmCallDisconnectTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The disconnect time of the call."
::= { cpmCallHistorySummaryEntry 1 }
cpmCallStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The start time of the current call."
::= { cpmCallHistorySummaryEntry 2 }
cpmCallHistorySummaryIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arbitrary small integer to distinguish calls that occured
at the same time tick."
::= { cpmCallHistorySummaryEntry 3 }
cpmUserID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User login ID or zero length string if unavailable.
This object comes directly from IOS."
::= { cpmCallHistorySummaryEntry 4 }
cpmUserIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS."
::= { cpmCallHistorySummaryEntry 5 }
cpmCallType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
analog(2),
digital(3),
v110(4),
v120(5),
voice(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call type:
unknown - None of the following
analog - Modem call
digital - Digital call
v110 - V110 Call
v120 - V120 Call
voice - Voice Call"
::= { cpmCallHistorySummaryEntry 6 }
cpmModemSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmModemPort uniquely identifies a modem.
Value is -1 if call does not utilize a modem."
::= { cpmCallHistorySummaryEntry 7 }
cpmModemPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmModemSlot uniquely identifies a modem.
Value is -1 if call does not utilize a modem."
::= { cpmCallHistorySummaryEntry 8 }
cpmCallDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the current call."
::= { cpmCallHistorySummaryEntry 9 }
cpmEntrySlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical system slot in which the DS1 line that the user
connected on resides."
::= { cpmCallHistorySummaryEntry 10 }
cpmEntryPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port for the DS1 line that the user connected on."
::= { cpmCallHistorySummaryEntry 11 }
cpmEntryChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel within the DS1 that is allocated to the call."
::= { cpmCallHistorySummaryEntry 12 }
cpmRemotePhoneNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote telephone number. For a call into the device,
this is the originating number. For a call out of the
device, this is the dialed number. If not available
the string length is zero."
::= { cpmCallHistorySummaryEntry 13 }
cpmLocalPhoneNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local telephone number. For a call into the device,
this is the dialed number. For a call out of the
device, this is the originating number. If not available
the string length is zero."
::= { cpmCallHistorySummaryEntry 14 }
cpmTTYNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTY number associated with this call. This
information comes from the IOS 'show line' command."
::= { cpmCallHistorySummaryEntry 15 }
cpmDS1LoopbackNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls the generation of
cpmDS1LoopbackNotification
When this variable is 'true(1)', generation of
these notification is enabled. When this
variable is 'false(2)', generation is disabled
The default value is 'false(2)'.
"
::= { cpmDS1LoopbackNotifyConfig 1 }
--
-- Notifications
--
cPopMgmtMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoPopMgmtMIB 2 }
cpmNotifications OBJECT IDENTIFIER ::=
{ cPopMgmtMIBNotificationPrefix 0 }
cpmDS0BusyoutNotification NOTIFICATION-TYPE
OBJECTS {
cpmDS0BusyoutStatus,
cpmDS0BusyoutTime,
cpmDS0BusyoutSource,
cpmDS0InterfaceIndex
}
STATUS current
DESCRIPTION
"This notification is sent when there is a state change
in cpmDS0BusyoutStatus object."
::= { cpmNotifications 1 }
cpmDS1LoopbackNotification NOTIFICATION-TYPE
OBJECTS {
dsx1LineStatus,
dsx1LineIndex
}
STATUS current
DESCRIPTION
"This notification is sent when there is a state change
in dsx1LineStatus object of RFC1406-MIB."
::= { cpmNotifications 2 }
-- conformance information
cpmMIBConformance OBJECT IDENTIFIER ::= { ciscoPopMgmtMIB 3 }
cpmMIBCompliances OBJECT IDENTIFIER ::= { cpmMIBConformance 1 }
cpmMIBGroups OBJECT IDENTIFIER ::= { cpmMIBConformance 2 }
-- compliance statements
cpmMIBCompliance MODULE-COMPLIANCE
STATUS obsolete -- superseded by cpmMIBComplianceRev1
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroup,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup
}
::= { cpmMIBCompliances 1 }
cpmMIBComplianceRev1 MODULE-COMPLIANCE
STATUS obsolete -- superseded by cpmMIBComplianceRev2
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroupRev1,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup
}
::= { cpmMIBCompliances 2 }
cpmComplianceRev2 MODULE-COMPLIANCE
STATUS obsolete -- superseded by cpmMIBComplianceRev3
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroupRev2,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup
}
::= { cpmMIBCompliances 3 }
cpmMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroupRev2,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup
}
GROUP cpmDS0StatusGroup
DESCRIPTION
"This group is optional."
GROUP cpmDS1UsageGroup
DESCRIPTION
"This group is optional."
GROUP cpmSystemGroup
DESCRIPTION
"This group is optional."
GROUP cpmNotificationGroup
DESCRIPTION
"This group is mandatory only for systems supporting
generation of notifications."
::= { cpmMIBCompliances 4 }
cpmMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroupRev2,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup,
cpmCallVolumeGroup
}
GROUP cpmDS0StatusGroup
DESCRIPTION
"This group is optional."
GROUP cpmDS1UsageGroup
DESCRIPTION
"This group is optional."
GROUP cpmSystemGroup
DESCRIPTION
"This group is optional."
::= { cpmMIBCompliances 5 }
cpmMIBComplianceRev5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement used in a PoPM Stack,
which implement the Cisco PoP Management MIB"
MODULE -- this module
MANDATORY-GROUPS {
cpmDS0UsageGroupRev2,
cpmCallFailureGroup,
cpmActiveCallSummaryGroup,
cpmCallHistorySummaryGroup,
cpmCallVolumeGroup
}
GROUP cpmDS0StatusGroup
DESCRIPTION
"This group is optional."
GROUP cpmDS1UsageGroup
DESCRIPTION
"This group is optional."
GROUP cpmSystemGroup
DESCRIPTION
"This group is optional."
GROUP cpmDS1LoopbackNotifyConfigGroup
DESCRIPTION
"This group is optional."
GROUP cpmNotificationGroupRev1
DESCRIPTION
"This group is optional."
::= { cpmMIBCompliances 6 }
-- units of conformance
cpmDS0UsageGroup OBJECT-GROUP
OBJECTS {
cpmConfiguredType,
cpmDS0CallType,
cpmL2Encapsulation,
cpmCallCount,
cpmTimeInUse,
cpmInOctets,
cpmOutOctets,
cpmInPackets,
cpmOutPackets,
cpmAssociatedInterface,
cpmISDNCfgBChanInUseForAnalog,
cpmISDNCfgBChannelsInUse,
cpmActiveDS0s,
cpmPPPCalls,
cpmV120Calls,
cpmV110Calls
}
STATUS obsolete -- superseded by cpmDS0UsageGroupRev1
DESCRIPTION
"A collection of objects providing the analog and
digital statistics for a DS1."
::= { cpmMIBGroups 1 }
cpmCallFailureGroup OBJECT-GROUP
OBJECTS {
cpmISDNCallsRejected,
cpmModemCallsRejected,
cpmISDNCallsClearedAbnormally,
cpmModemCallsClearedAbnormally,
cpmISDNNoResource,
cpmModemNoResource
}
STATUS current
DESCRIPTION
"A collection of objects providing aggregate
totals of call failures"
::= { cpmMIBGroups 2 }
cpmActiveCallSummaryGroup OBJECT-GROUP
OBJECTS {
cpmActiveUserID,
cpmActiveCallType,
cpmActiveUserIpAddr,
cpmActiveModemSlot,
cpmActiveModemPort,
cpmActiveCallDuration,
cpmActiveEntrySlot,
cpmActiveEntryPort,
cpmActiveEntryChannel,
cpmActiveRemotePhoneNumber,
cpmActiveLocalPhoneNumber,
cpmActiveTTYNumber
}
STATUS current
DESCRIPTION
"A collection of objects providing the summary of the
currently active calls."
::= { cpmMIBGroups 3 }
cpmCallHistorySummaryGroup OBJECT-GROUP
OBJECTS {
cpmCallHistorySummaryTableMaxLength,
cpmCallHistorySummaryRetainTimer,
cpmUserID,
cpmUserIpAddr,
cpmCallType,
cpmModemSlot,
cpmModemPort,
cpmCallDuration,
cpmEntrySlot,
cpmEntryPort,
cpmEntryChannel,
cpmRemotePhoneNumber,
cpmLocalPhoneNumber,
cpmTTYNumber
}
STATUS current
DESCRIPTION
"A collection of objects providing the summary of calls
that were recently terminated."
::= { cpmMIBGroups 4 }
cpmDS0UsageGroupRev1 OBJECT-GROUP
OBJECTS {
cpmConfiguredType,
cpmDS0CallType,
cpmL2Encapsulation,
cpmCallCount,
cpmTimeInUse,
cpmInOctets,
cpmOutOctets,
cpmInPackets,
cpmOutPackets,
cpmAssociatedInterface,
cpmISDNCfgBChanInUseForAnalog,
cpmISDNCfgBChannelsInUse,
cpmActiveDS0s,
cpmPPPCalls,
cpmV120Calls,
cpmV110Calls,
cpmActiveDS0sHighWaterMark,
cpmDS1ActiveDS0s,
cpmDS1ActiveDS0sHighWaterMark,
cpmSW56CfgBChannelsInUse
}
STATUS obsolete -- superseded by cpmDS0UsageGroupRev2
DESCRIPTION
"A collection of objects providing the analog and
digital statistics for a DS1."
::= { cpmMIBGroups 5 }
cpmDS0UsageGroupRev2 OBJECT-GROUP
OBJECTS {
cpmConfiguredType,
cpmDS0CallType,
cpmL2Encapsulation,
cpmCallCount,
cpmTimeInUse,
cpmInOctets,
cpmOutOctets,
cpmInPackets,
cpmOutPackets,
cpmAssociatedInterface,
cpmISDNCfgBChanInUseForAnalog,
cpmISDNCfgBChannelsInUse,
cpmActiveDS0s,
cpmPPPCalls,
cpmV120Calls,
cpmV110Calls,
cpmActiveDS0sHighWaterMark,
cpmDS1ActiveDS0s,
cpmDS1ActiveDS0sHighWaterMark,
cpmSW56CfgBChannelsInUse,
cpmISDNCfgBChanInUseForVoice,
cpmCASCfgBChanInUseForVoice
}
STATUS current
DESCRIPTION
"A collection of objects providing the analog and
digital statistics for a DS1."
::= { cpmMIBGroups 6 }
cpmDS1UsageGroup OBJECT-GROUP
OBJECTS {
cpmDS1TotalAnalogCalls,
cpmDS1TotalDigitalCalls,
cpmDS1TotalV110Calls,
cpmDS1TotalV120Calls,
cpmDS1TotalCalls,
cpmDS1TotalTimeInUse,
cpmDS1CurrentIdle,
cpmDS1CurrentOutOfService,
cpmDS1CurrentBusyout,
cpmDS1InOctets,
cpmDS1OutOctets,
cpmDS1InPackets,
cpmDS1OutPackets
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics aggregation
across DS0s within a DS1."
::= { cpmMIBGroups 7 }
cpmSystemGroup OBJECT-GROUP
OBJECTS {
cpmISDNCfgActiveDChannels,
cpmISDNCfgBChannelsTimeInUse,
cpmISDNCfgBChannelsTimeInUseAnlg,
cpmISDNCfgBChannelCalls,
cpmISDNCfgBChannelAnalogCalls,
cpmTotalISDNSyncPPPCalls
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics aggregation
for the entire system."
::= { cpmMIBGroups 8 }
cpmDS0StatusGroup OBJECT-GROUP
OBJECTS {
cpmDS0BusyoutNotifyEnable,
cpmDS0OperStatus,
cpmDS0BusyoutAdminStatus,
cpmDS0BusyoutAllow,
cpmDS0BusyoutStatus,
cpmDS0BusyoutSource,
cpmDS0BusyoutTime,
cpmDS0ConfigFunction,
cpmDS0InterfaceIndex
}
STATUS current
DESCRIPTION
"A collection of objects providing the status for a DS0."
::= { cpmMIBGroups 9 }
cpmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { cpmDS0BusyoutNotification }
STATUS deprecated
DESCRIPTION
"The collection of notifications
"
::= { cpmMIBGroups 10 }
cpmDS1LoopbackNotifyConfigGroup OBJECT-GROUP
OBJECTS {
cpmDS1LoopbackNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing the
notification configuration
"
::= { cpmMIBGroups 11 }
cpmCallVolumeGroup OBJECT-GROUP
OBJECTS {
cpmCallVolSuccISDNDigital,
cpmCallVolAnalogCallClearedNormally
}
STATUS current
DESCRIPTION
"A collection of objects providing aggregate
totals of call successfully completed"
::= { cpmMIBGroups 12 }
cpmNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
cpmDS0BusyoutNotification,
cpmDS1LoopbackNotification
}
STATUS current
DESCRIPTION
"The collection of notifications
"
::= { cpmMIBGroups 13 }
END
Reference in New Issue View Git Blame Copy Permalink