MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-QOS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

947 lines
34 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-QOS-MIB.my
-- November 2005, Devesh Pujari, Bharat Biswal,
-- Prasanna Viswakumar, Srinath Candadai
--
-- Copyright (c) 2005-2007 by Cisco Systems Inc.
-- All rights reserved.
-- ******************************************************************
CISCO-LWAPP-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
cLApDot11IfEntry
FROM CISCO-LWAPP-AP-MIB
cLWlanConfigEntry
FROM CISCO-LWAPP-WLAN-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappQosMIB MODULE-IDENTITY
LAST-UPDATED "200701070000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information provided by this MIB is used to study
the quality of service in the voice and video traffic
on the WLAN.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+
+ + + + + +
+ CC + + CC + + CC +
+ + + + + +
+......+ +......+ +......+
.. . .
.. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ AP + + AP + + AP + + AP +
+ + + + + + + +
+......+ +......+ +......+ +......+
. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ MN + + MN + + MN + + MN +
+ + + + + + + +
+......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Gratuitous Probe Response (GPR)
The Gratuitous Probe Response feature aids in conserving
battery power of WLAN-enabled cell phones by providing
a high rate packet on the order of tens of milliseconds
such that these kind of phones can wake up and wait at
predefined intervals, to reduce battery power. The
GPR packet is transmitted from the AP at a predefined
time interval.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node
and client are used interchangeably.
TU
A measurement of time in units of 1024 microseconds.
User Priority ( UP )
Specifies a the priority rules in QOS for handling user
priority.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol"
REVISION "200701070000Z"
DESCRIPTION
"Added ciscoLwappQosDot11aConfigGroupSup1 and
ciscoLwappQosDot11bConfigGroupSup1 objects."
REVISION "200604130000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 524 }
ciscoLwappQosMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 0 }
ciscoLwappQosMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 1 }
ciscoLwappQosMIBConform OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 2 }
cLQd11aCACConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 1 }
cLQd11bCACConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 2 }
cLQd11GprConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 3 }
cLQd11CACStats OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 4 }
cLQEntConfConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 5 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VOICE traffic in 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aVoiceAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for voice traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11aVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVoiceMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay voice traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11aCACConfig 1 }
cLQd11aVoiceMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11a interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
::= { cLQd11aCACConfig 2 }
cLQd11aVoiceMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traffic,
when admission control is enabled for 802.11a
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is disabled and not operational. The
value configured through this object takes
effect when the 802.11a network is enabled."
DEFVAL { 0 }
::= { cLQd11aCACConfig 3 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VIDEO traffic in 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aVideoAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for video traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11aVideoMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVideoMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay video traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11aCACConfig 4 }
cLQd11aVideoMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11a
interfaces in the controller. When set to 0, all
available bandwidth in 802.11a interfaces can be
allocated to video traffic.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
DEFVAL { 0 }
::= { cLQd11aCACConfig 5 }
cLQd11aVideoMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traffic,
when admission control is enabled for 802.11a
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is disabled and not operational. The
value configured through this object takes effect
when the 802.11a network is enabled and
operational."
DEFVAL { 0 }
::= { cLQd11aCACConfig 6 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VOICE traffic in 802.11b/g interfaces in the controller
-- ********************************************************************
cLQd11bVoiceAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for voice traffic flowing through the
802.11b/g interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11bVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11bVoiceMaxRoamingBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay voice traffic depending on load on the
WLAN."
DEFVAL { true }
::= { cLQd11bCACConfig 1 }
cLQd11bVoiceMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth that
can be allocated by controller for voice traffic
when admission control is enabled for 802.11b/g
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11b/g
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
::= { cLQd11bCACConfig 2 }
cLQd11bVoiceMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11bVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traffic,
when admission control is enabled for 802.11b
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11b/g
network is not operational. The value configured
through this object takes effect when the 802.11b/g
network is enabled and operational."
DEFVAL { 0 }
::= { cLQd11bCACConfig 3 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VIDEO traffic in 802.11b/g interfaces in the controller
-- ********************************************************************
cLQd11bVideoAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for video traffic flowing through the
802.11b/g interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11bVideoMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11bVideoMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay video traffic depending on load on the
WLAN."
DEFVAL { true }
::= { cLQd11bCACConfig 4 }
cLQd11bVideoMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth that
can be allocated by controller for video traffic when
admission control is enabled for 802.11b/g interfaces
in the controller. When set to 0, all available
bandwidth in 802.11b/g interfaces can be allocated
to video traffic.
Please note that the write operation on this
object will be successful only if the 802.11b/g
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
DEFVAL { 0 }
::= { cLQd11bCACConfig 5 }
cLQd11bVideoMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11bVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traffic,
when admission control is enabled for 802.11b
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11b/g
network is not operational. The value configured
through this object takes effect when the 802.11b/g
network is enabled and operational."
DEFVAL { 0 }
::= { cLQd11bCACConfig 6 }
-- ********************************************************************
-- * Configuration of GPR (Gratuitous Probe Response) probe interval
-- * for all 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aGprProbeInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..100 )
UNITS "TU"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set GPR probe interval
period to be used by all 802.11a interfaces in the
controller, when the radios are advertising any
WLAN with GPR support enabled.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational. The value configured
through this object takes effect when the 802.11a
network is enabled and operational."
DEFVAL { 10 }
::= { cLQd11aCACConfig 7 }
cLQd11aVoiceCtrl OBJECT-TYPE
SYNTAX INTEGER {
loadBased(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When admission control is enabled these parameters
can be modified.
loadBased - controller will reserve and manage
max-bandwidth and roaming-bandwidth
based on the load on the WLAN.
static - controller will reserve and
manage max-bandwidth
(cLQd11aVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVoiceMaxRoamBandwidth)
as per user configured values.
When ACM is disabled, admission control will not
be enforced. This may delay voice traffic depending
on the traffic on the WLAN."
DEFVAL { loadBased }
::= { cLQd11aCACConfig 8 }
cLQd11aExpeditedBw OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association responses.
A value of 'false' will ensure that the APs do not
advertise the expedited BW support in their beacons
and association responses."
::= { cLQd11aCACConfig 9 }
-- ********************************************************************
-- * Configuration of GPR (Gratuitous Probe Response) probe interval
-- * for all 802.11b/g interfaces in the controller
-- ********************************************************************
cLQd11bGprProbeInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..100 )
UNITS "TU"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set GPR probe interval
period to be used by all 802.11b/g interfaces in the
controller, when the radios are advertising any
WLAN with GPR support enabled.
Please note that the write operation on this
object will be successful only if the 802.11b/g
network is not operational. The value configured
through this object takes effect when the 802.11b/g
network is enabled."
DEFVAL { 10 }
::= { cLQd11bCACConfig 7 }
cLQd11bVoiceCtrl OBJECT-TYPE
SYNTAX INTEGER {
loadBased(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When admission control is enabled these parameters
can be modified.
loadBased - controller will reserve and manage
max-bandwidth and roaming-bandwidth
based on the load on the WLAN.
static - controller will reserve and
manage max-bandwidth
(cLQd11bVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11bVoiceMaxRoamBandwidth)
as per user configured values.
When ACM is disabled, admission control will not
be enforced. This may delay voice traffic depending
on the traffic on the WLAN."
DEFVAL { loadBased }
::= { cLQd11bCACConfig 8 }
cLQd11bExpeditedBw OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association responses.
A value of 'false' will ensure that the APs do not
advertise the expedited BW support in their beacons
and association responses."
::= { cLQd11bCACConfig 9 }
-- ********************************************************************
-- Table to represent (Gratuitous Probe Response) GPR
-- parameters per each WLAN.
-- ********************************************************************
cLQd11GprTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLQd11GprEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table populates the GPR configuration on the
WLANs configured on this controller.
There exists a row in this table for each WLAN
configured through cLWlanConfigTable. A row is added
is to this table by the agent when a WLAN is created
by the user through an explicit management action
initiated from a network management station.
Similarly a row gets deleted automatically when the
user deletes the particular WLAN."
::= { cLQd11GprConfig 1 }
cLQd11GprEntry OBJECT-TYPE
SYNTAX CLQd11GprEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cLQd11GprTable and corresponds to the
GPR configuration on a WLAN."
AUGMENTS { cLWlanConfigEntry }
::= { cLQd11GprTable 1 }
CLQd11GprEntry ::= SEQUENCE {
cLQd11GprSupport TruthValue
}
cLQd11GprSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If 'true', then the corresponding radios that
advertise this WLAN, will send Gratuitous Probe
Response. If 'false', then the corresponding radios
that advertise this WLAN, will not send Gratuitous
Probe Response."
DEFVAL { false }
::= { cLQd11GprEntry 1 }
-- ********************************************************************
-- * CALL admission control statistics
-- ********************************************************************
cLQd11CACStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLQd11CACStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table populates the call admission control
metrics collected by observing the voice or video
traffic on the dot11 interface of a particular
AP.
There exists a row in this table for each row
corresponding to a dot11 interface found in
cLApDot11IfTable. A row corresponding to a
dot11 interface is added when an AP joins the
controller. The row gets deleted when the AP
dissociates from the controller."
::= { cLQd11CACStats 1 }
cLQd11CACStatsEntry OBJECT-TYPE
SYNTAX CLQd11CACStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
CLQd11CACStatsTable and corresponds to the
admission control statistics for a particular
dot11 interface."
AUGMENTS { cLApDot11IfEntry }
::= { cLQd11CACStatsTable 1 }
CLQd11CACStatsEntry ::= SEQUENCE {
cLQd11CacVoiceBwInUse Gauge32,
cLQd11CacVideoBwInUse Gauge32,
cLQd11CacVoiceCallsInProgress Gauge32,
cLQd11CacRoamVoiceCallsInProg Gauge32,
cLQd11CacTotalVoiceCallsAP Counter32,
cLQd11CacTotalRoamCallsAP Counter32,
cLQd11CacVoiceCallsRejectedAP Counter32,
cLQd11CacRoamCallsRejectedAP Counter32,
cLQd11CacRejCallsInsufBw Counter32,
cLQd11CacRejCallsBadParams Counter32,
cLQd11CacRejCallsPhyRate Counter32,
cLQd11CacRejCallsQosPolicy Counter32
}
cLQd11CacVoiceBwInUse OBJECT-TYPE
SYNTAX Gauge32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the voice bandwidth in use
as a percentage of the bandwidth configured through
cLQd11aVoiceMaxAdmBandwidth or
cLQd11bVoiceMaxAdmBandwidth, depending on the type
of this dot11 interface."
::= { cLQd11CACStatsEntry 1 }
cLQd11CacVideoBwInUse OBJECT-TYPE
SYNTAX Gauge32 (0..100 )
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the video bandwidth in use
as a percentage of the bandwidth configured through
cLQd11aVideoMaxAdmBandwidth or
cLQd11bVideoMaxAdmBandwidth, depending on the type
of this dot11 interface."
::= { cLQd11CACStatsEntry 2 }
cLQd11CacVoiceCallsInProgress OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice calls currently in progress on this dot11
interface."
::= { cLQd11CACStatsEntry 3 }
cLQd11CacRoamVoiceCallsInProg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice calls initiated from roaming clients
currently in progress on this dot11 interface."
::= { cLQd11CACStatsEntry 4 }
cLQd11CacTotalVoiceCallsAP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice calls observed on this dot11 interface
ever since this AP has joined the controller."
::= { cLQd11CACStatsEntry 5 }
cLQd11CacTotalRoamCallsAP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice and video calls initiated from roaming clients
observed on this dot11 interface ever since
this AP has joined the controller."
::= { cLQd11CACStatsEntry 6 }
cLQd11CacVoiceCallsRejectedAP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice calls observed as rejected on this dot11
interface, ever since this AP has joined the
controller."
::= { cLQd11CACStatsEntry 7 }
cLQd11CacRoamCallsRejectedAP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
voice and video calls initiated from roaming
clients observed as rejected on this dot11
interface, ever since this AP has joined the
controller."
::= { cLQd11CACStatsEntry 8 }
cLQd11CacRejCallsInsufBw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
calls observed as rejected on this dot11
interface due to insufficient bandwidth, ever
since this AP has joined the controller."
::= { cLQd11CACStatsEntry 9 }
cLQd11CacRejCallsBadParams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
calls observed as rejected on this dot11
interface due to mismatch in call parameters, ever
since this AP has joined the controller."
::= { cLQd11CACStatsEntry 10 }
cLQd11CacRejCallsPhyRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
calls observed as rejected on this dot11
interface due to mismatch in 802.11 data rates,
ever since this AP has joined the controller."
::= { cLQd11CACStatsEntry 11 }
cLQd11CacRejCallsQosPolicy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the count of the number of
calls observed as rejected on this dot11
interface due to restrictions imposed by QOS
policies, ever since this AP has joined the
controller."
::= { cLQd11CACStatsEntry 12 }
-- ********************************************************************
-- * Compliance statements
-- ********************************************************************
ciscoLwappQosMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappQosMIBConform 1 }
ciscoLwappQosMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappQosMIBConform 2 }
ciscoLwappQosMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappQosMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappQosDot11aConfigGroup,
ciscoLwappQosDot11bConfigGroup,
ciscoLwappQosDot11WlanConfigGroup,
ciscoLwappQosDot11CacStatsGroup
}
::= { ciscoLwappQosMIBCompliances 1 }
ciscoLwappQosMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappQosMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappQosDot11aConfigGroup,
ciscoLwappQosDot11bConfigGroup,
ciscoLwappQosDot11WlanConfigGroup,
ciscoLwappQosDot11CacStatsGroup,
ciscoLwappQosDot11aConfigGroupSup1,
ciscoLwappQosDot11bConfigGroupSup1
}
::= { ciscoLwappQosMIBCompliances 2 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappQosDot11aConfigGroup OBJECT-GROUP
OBJECTS {
cLQd11aVoiceAdmCtrlSupport,
cLQd11aVoiceMaxAdmBandwidth,
cLQd11aVoiceMaxRoamBandwidth,
cLQd11aVideoAdmCtrlSupport,
cLQd11aVideoMaxAdmBandwidth,
cLQd11aVideoMaxRoamBandwidth,
cLQd11aGprProbeInterval
}
STATUS current
DESCRIPTION
"This collection of objects represents the
quality-of-service parameters 802.11a networks."
::= { ciscoLwappQosMIBGroups 1 }
ciscoLwappQosDot11bConfigGroup OBJECT-GROUP
OBJECTS {
cLQd11bVoiceAdmCtrlSupport,
cLQd11bVoiceMaxAdmBandwidth,
cLQd11bVoiceMaxRoamBandwidth,
cLQd11bVideoAdmCtrlSupport,
cLQd11bVideoMaxAdmBandwidth,
cLQd11bVideoMaxRoamBandwidth,
cLQd11bGprProbeInterval
}
STATUS current
DESCRIPTION
"This collection of objects represents the
quality-of-service parameters 802.11b networks."
::= { ciscoLwappQosMIBGroups 2 }
ciscoLwappQosDot11WlanConfigGroup OBJECT-GROUP
OBJECTS { cLQd11GprSupport }
STATUS current
DESCRIPTION
"This collection of objects represents the
quality-of-services parameters on a particular WLAN."
::= { ciscoLwappQosMIBGroups 3 }
ciscoLwappQosDot11CacStatsGroup OBJECT-GROUP
OBJECTS {
cLQd11CacVoiceBwInUse,
cLQd11CacVideoBwInUse,
cLQd11CacVoiceCallsInProgress,
cLQd11CacRoamVoiceCallsInProg,
cLQd11CacTotalVoiceCallsAP,
cLQd11CacTotalRoamCallsAP,
cLQd11CacVoiceCallsRejectedAP,
cLQd11CacRoamCallsRejectedAP,
cLQd11CacRejCallsInsufBw,
cLQd11CacRejCallsBadParams,
cLQd11CacRejCallsPhyRate,
cLQd11CacRejCallsQosPolicy
}
STATUS current
DESCRIPTION
"This collection of objects provide the call
admission control statistics observed on the
dot11 interfaces of an AP."
::= { ciscoLwappQosMIBGroups 4 }
ciscoLwappQosDot11aConfigGroupSup1 OBJECT-GROUP
OBJECTS {
cLQd11aVoiceCtrl,
cLQd11aExpeditedBw
}
STATUS current
DESCRIPTION
"This collection of objects represents the
quality-of-service parameters 802.11a networks."
::= { ciscoLwappQosMIBGroups 5 }
ciscoLwappQosDot11bConfigGroupSup1 OBJECT-GROUP
OBJECTS {
cLQd11bVoiceCtrl,
cLQd11bExpeditedBw
}
STATUS current
DESCRIPTION
"This collection of objects represents the
quality-of-service parameters 802.11b networks."
::= { ciscoLwappQosMIBGroups 6 }
END
Reference in New Issue View Git Blame Copy Permalink