MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-MESH-STATS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

945 lines
34 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-MESH-STATS-MIB.my
-- February,2007 Devesh Pujari
--
-- Copyright (c) 2007 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-MESH-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter32,
Gauge32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
TimeStamp,
TimeInterval
FROM SNMPv2-TC
cLApSysMacAddress,
cLApName
FROM CISCO-LWAPP-AP-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappMeshStatsMIB MODULE-IDENTITY
LAST-UPDATED "200703120000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
(LWAPP) tunnel from Light-weight Access Points.
This MIB represents statistics collected for mesh node
in Wireless Mesh Network.
The deployment of the controller
(referred to as CC in the diagram), mesh nodes
(RAP and MAP) LWAPP APs, client(MS) and NMS appear
as follows.
+.......+ +.......+
+ + + +
+ NMS + + NMS +
+ + + +
+.......+ +.......+
. .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ RAP + + RAP + + RAP + + RAP + + RAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MAP + + MS + + MAP + + MAP + + MAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . .. .
. . . .. .
. . . .. .
. . . . .
+......+ +......+ +......+ +......+. +......+
+ + + + + + + + + +
+ MAP + + MAP + + MAP + + MAP + + MS +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the
configuration, that includes the WLAN parameters to
the LWAPP APs.
The APs encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Mobile Station ( MS )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Station
and client are used interchangeably.
Network Management System ( NMS )
The station from which the administrator manages the
wired and wireless networks.
Mesh Node
A mesh node is defined as a physical or logical entity
in the mesh network participating in forming the mesh
backhaul. RAP and MAP are two types of mesh nodes
supported in mesh network.
Root AP (RAP)
The AP forming the bridge between a wired and a mesh
network with an Ethernet interface to the wired
network and a 802.11 radio interface to the mesh
network
Mesh AP (MAP).
The AP extending wireless coverage similar to a
repeater in a mesh network and consists of a 802.11
uplink and a 802.11 downlink. On a single-radio
backhaul, both uplink and downlink exist on the same
radio and are logical links only. On a multi-radio
backhaul, they may exist on different radios.
Mesh Network
Network starting with the wireless backhaul downlink
of the RAP and all the entities below except any
attached network to the Ethernet link of MAPs. A mesh
network below a single RAP is also referred to as a
'Mesh Sector'.A mesh network consists of mesh nodes.
A single mesh network is always augmented to a single
wired network.
Mesh Link
A logical 802.11 link between two mesh nodes. A single
link is point-to-point. All point-to-multipoint links
are considered as multiple mesh links. Often referred
to as mesh backhaul link.
Mesh Backhaul
A Mesh backhaul consists of mesh nodes and mesh links
terminating at a RAP. This necessarily creates a one-
to-one relationship between a 'mesh network', 'mesh
sector' and a 'mesh backhaul' where these terms can be
used interchangeably.
SNR
Signal to Noise ratio on the 802.11 radio.
Bridged network
The bridged network is defined as the network(s)
attached to the Ethernet port of any MAP. There can be
multiple such networks attached to a single mesh
network.
Mesh Node Roaming
A mesh node may change its parent mesh node naturally
when the RF/network condition changes. Child Mesh node
will re-associate and re-authenticate to new parent
mesh node. Mesh Security supports two types of mesh
node roaming.
Intra-controller - LWAPP session is not lost.
Inter-controller - LWAPP session is lost.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol"
REVISION "200703120000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 617 }
ciscoLwappMeshStatsMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIB 0 }
ciscoLwappMeshStatsMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIB 1 }
ciscoLwappMeshStatsMIBConfigObjects OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIB 2 }
ciscoLwappMeshStatsMIBConform OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIB 3 }
ciscoLwappMeshNodeStats OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIBObjects 1 }
-- ********************************************************************
-- * Mesh Node Statistics
-- ********************************************************************
clMeshNodeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNodeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about packets
that were transmitted to or received from a mesh node.
An entry in this table gets added when a mesh node
associates to the controller and entry gets removed
when mesh node disassociates from the controller."
::= { ciscoLwappMeshNodeStats 1 }
clMeshNodeStatsEntry OBJECT-TYPE
SYNTAX ClMeshNodeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An (conceptual) entry in this table represents statistics
for a mesh node."
INDEX { cLApSysMacAddress }
::= { clMeshNodeStatsTable 1 }
ClMeshNodeStatsEntry ::= SEQUENCE {
clMeshNodeMalformedNeighPkts Counter32,
clMeshNodePoorNeighSnrPkts Counter32,
clMeshNodeExcludedPkts Counter32,
clMeshNodeRxNeighReq Counter32,
clMeshNodeRxNeighRsp Counter32,
clMeshNodeTxNeighReq Counter32,
clMeshNodeTxNeighRsp Counter32,
clMeshNodeParentChanges Counter32
}
clMeshNodeMalformedNeighPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of packets
received from neighbor mesh nodes which could
not be decoded."
::= { clMeshNodeStatsEntry 1 }
clMeshNodePoorNeighSnrPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of packets
received from neighbor mesh nodes which were below
SNR threshold value."
::= { clMeshNodeStatsEntry 2 }
clMeshNodeExcludedPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of packets
received from excluded neighbor mesh nodes."
::= { clMeshNodeStatsEntry 3 }
clMeshNodeRxNeighReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of request
received from neighbor mesh node APs. Requests
can be either broadcast or unicast from neighbor
mesh nodes."
::= { clMeshNodeStatsEntry 4 }
clMeshNodeRxNeighRsp OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of response
received from neighbor mesh node APs."
::= { clMeshNodeStatsEntry 5 }
clMeshNodeTxNeighReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of request
sent to neighbor mesh node APs. Requests can be
broadcast or unicast to neighbor mesh node."
::= { clMeshNodeStatsEntry 6 }
clMeshNodeTxNeighRsp OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of response
sent to neighbor mesh node APs."
::= { clMeshNodeStatsEntry 7 }
clMeshNodeParentChanges OBJECT-TYPE
SYNTAX Counter32
UNITS "parent-switches"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of times
this mesh node has changed its parent."
::= { clMeshNodeStatsEntry 8 }
-- ********************************************************************
-- * Mesh Node Packet Queue Statistics
-- ********************************************************************
clMeshNodePktQueueStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNodePktQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about different
packet queues of a mesh node. Queues are maintained
in a mesh node based on quality of service and packets
wait for its turn in queue before it is sent to
network. An (conceptual) entry in this table is created
when a mesh node associates with controller and start
sending packets to neighbor mesh node or controller
Entries are removed when the mesh node disassociates
from controller."
::= { ciscoLwappMeshNodeStats 2 }
clMeshNodePktQueueStatsEntry OBJECT-TYPE
SYNTAX ClMeshNodePktQueueStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents average queue size
and peak packets queue reached."
INDEX {
cLApSysMacAddress,
clMeshNodePktQueueIndex
}
::= { clMeshNodePktQueueStatsTable 1 }
ClMeshNodePktQueueStatsEntry ::= SEQUENCE {
clMeshNodePktQueueIndex INTEGER ,
clMeshNodePktQueueAvg Gauge32,
clMeshNodePktQueuePeak Gauge32,
clMeshNodePktQueuePktsDropped Counter32,
clMeshNodePktQueueTimeStamp TimeStamp,
clMeshNodePktQueueSize Unsigned32
}
clMeshNodePktQueueIndex OBJECT-TYPE
SYNTAX INTEGER {
silver(1),
gold(2),
platinum(3),
bronze(4),
management(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents different types of queues
in a mesh node.
silver - queue for Best Effort packets.
gold - queue for Video Application.
platinum - queue for Voice Application.
bronze - queue for Background.
management - queue for management frames."
::= { clMeshNodePktQueueStatsEntry 1 }
clMeshNodePktQueueAvg OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents average number of
packets waiting in the queue during interval
defined by object 'clMeshNodeStatsTimeInterval'."
::= { clMeshNodePktQueueStatsEntry 2 }
clMeshNodePktQueuePeak OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents peak number of
packets waiting in the queue during interval
defined by object 'clMeshNodeStatsTimeInterval'."
::= { clMeshNodePktQueueStatsEntry 3 }
clMeshNodePktQueuePktsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of packets
dropped due to queue overflow."
::= { clMeshNodePktQueueStatsEntry 4 }
clMeshNodePktQueueTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents when the queue statistics
was last collected. This value is represented as a
instance of sysUp time."
::= { clMeshNodePktQueueStatsEntry 5 }
clMeshNodePktQueueSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents max number of packets a
queue can hold."
::= { clMeshNodePktQueueStatsEntry 6 }
-- ********************************************************************
-- * Mesh Node Security Statistics
-- ********************************************************************
clMeshNodeSecStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNodeSecStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about packets
transmitted to or received from a mesh node during
association or authentication of a child mesh node
to parent mesh node. An (conceptual) entry in this
table is created when a mesh node associates
or authenticates with a parent mesh node. Entries are
removed when the mesh node disassociates from controller."
::= { ciscoLwappMeshNodeStats 3 }
clMeshNodeSecStatsEntry OBJECT-TYPE
SYNTAX ClMeshNodeSecStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each (conceptual) entry in this table represents count of
security packets a mesh node exchange with its parent mesh
node."
INDEX { cLApSysMacAddress }
::= { clMeshNodeSecStatsTable 1 }
ClMeshNodeSecStatsEntry ::= SEQUENCE {
clMeshNodeSecTxPkts Counter32,
clMeshNodeSecRxPkts Counter32,
clMeshNodeAssocReqFailures Counter32,
clMeshNodeAssocReqTimeouts Counter32,
clMeshNodeAssocReqSuccess Counter32,
clMeshNodeAuthReqFailures Counter32,
clMeshNodeAuthReqTimeouts Counter32,
clMeshNodeAuthReqSuccess Counter32,
clMeshNodeReassocReqFailures Counter32,
clMeshNodeReassocReqTimeouts Counter32,
clMeshNodeReassocReqSuccess Counter32,
clMeshNodeReauthReqFailures Counter32,
clMeshNodeReauthReqTimeouts Counter32,
clMeshNodeReauthReqSuccess Counter32,
clMeshNodeUnknownAssocReq Counter32,
clMeshNodeInvalidAssocReq Counter32,
clMeshNodeUnknownReauthReq Counter32,
clMeshNodeInvalidReauthReq Counter32,
clMeshNodeUnknownReassocReq Counter32,
clMeshNodeInvalidReassocReq Counter32
}
clMeshNodeSecTxPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of packets
transmitted by this mesh node during security
negotiations."
::= { clMeshNodeSecStatsEntry 1 }
clMeshNodeSecRxPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of packets
received by this mesh node during security
negotiations."
::= { clMeshNodeSecStatsEntry 2 }
clMeshNodeAssocReqFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
association request sent by this node as a
child mesh node to a parent mesh node, that
resulted in a failure."
::= { clMeshNodeSecStatsEntry 3 }
clMeshNodeAssocReqTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
association request sent by this node, as a
child mesh node to a parent mesh node, that
timed out."
::= { clMeshNodeSecStatsEntry 4 }
clMeshNodeAssocReqSuccess OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of association
request sent by this node, as a child mesh
node to a parent mesh node, that completed."
::= { clMeshNodeSecStatsEntry 5 }
clMeshNodeAuthReqFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
authenticaton request sent by this node, as a child
mesh node to a parent mesh node, that failed."
::= { clMeshNodeSecStatsEntry 6 }
clMeshNodeAuthReqTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
authentication request sent by this node, as a child
mesh node to a parent mesh node, that timed out."
::= { clMeshNodeSecStatsEntry 7 }
clMeshNodeAuthReqSuccess OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
authentication request sent by this node, as a child
mesh node to a parent mesh node, that completed."
::= { clMeshNodeSecStatsEntry 8 }
clMeshNodeReassocReqFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-association request sent by this node, as a child
mesh node to a parent mesh node, that failed."
::= { clMeshNodeSecStatsEntry 9 }
clMeshNodeReassocReqTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-association request sent by this node, as a child
mesh node to a parent mesh node, that timed out."
::= { clMeshNodeSecStatsEntry 10 }
clMeshNodeReassocReqSuccess OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-association request sent by this node, as a child
mesh node to a parent mesh node, that completed."
::= { clMeshNodeSecStatsEntry 11 }
clMeshNodeReauthReqFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-authentication request sent by this node, as a child
mesh node to a parent mesh node, that failed."
::= { clMeshNodeSecStatsEntry 12 }
clMeshNodeReauthReqTimeouts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-authentication request sent by this node, as a child
mesh node to a parent mesh node, that timed out."
::= { clMeshNodeSecStatsEntry 13 }
clMeshNodeReauthReqSuccess OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of
re-authentication request sent by this node, as a child
mesh node to a parent mesh node, that completed."
::= { clMeshNodeSecStatsEntry 14 }
clMeshNodeUnknownAssocReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of unknown
association request received by this node, as
a parent mesh node from a child mesh node. This
may happen when child is a unknown neighbor."
::= { clMeshNodeSecStatsEntry 15 }
clMeshNodeInvalidAssocReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of invalid
association request that were received by this node,
as a parent mesh node from a child mesh node. This
may happen when child is a valid neighbor but is in
a wrong state to be associated."
::= { clMeshNodeSecStatsEntry 16 }
clMeshNodeUnknownReauthReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of unknown
re-authentication request received by this node, as
a parent mesh node from a child mesh node. This may
happen when child is a unknown neighbor."
::= { clMeshNodeSecStatsEntry 17 }
clMeshNodeInvalidReauthReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of invalid
re-authentication request received by this node, as
a parent mesh node from a child mesh node. This may
happen when child is a valid neighbor but is in a
wrong state to be re-authenticated."
::= { clMeshNodeSecStatsEntry 18 }
clMeshNodeUnknownReassocReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of unknown
re-association request received by this node, as
a parent mesh node from a child mesh node. This may
happen when child is a unknown neighbor."
::= { clMeshNodeSecStatsEntry 19 }
clMeshNodeInvalidReassocReq OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates total number of invalid
re-association request received by this node, as
a parent mesh node from a child mesh node. This
may happen when child is a valid neighbor but is
in a wrong state to be re-associated."
::= { clMeshNodeSecStatsEntry 20 }
-- ********************************************************************
-- * Config objects
-- ********************************************************************
clMeshNodeQueueOverflowNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
'ciscoLwappMeshQueueOverflow' notification.
A value of 'true' indicates that the agent generates
'ciscoLwappMeshQueueOverflow' notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappMeshQueueOverflow notification."
DEFVAL { true }
::= { ciscoLwappMeshStatsMIBConfigObjects 1 }
clMeshNodeStatsTimeInterval OBJECT-TYPE
SYNTAX TimeInterval (18000..90000 )
UNITS "hundredths-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object represents the time interval after
which statistics are populated for each mesh node."
DEFVAL { 18000 }
::= { ciscoLwappMeshStatsMIBConfigObjects 2 }
-- ********************************************************************
-- * NOTIFICATION TYPE objects
-- ********************************************************************
ciscoLwappMeshQueueOverflow NOTIFICATION-TYPE
OBJECTS {
cLApName,
clMeshNodePktQueuePeak,
clMeshNodePktQueuePktsDropped
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when a
queue overflows and as a result packets get dropped.
After each time interval, defined by object
'clMeshNodeStatsTimeInterval', mesh node sends its
queue statistics to the controller which also includes
cumulative number of packets dropped, defined by object
'clMeshNodePktQueuePktsDropped'. If the packets dropped
is higher than the previous time notification generated
then this notification is raised.."
::= { ciscoLwappMeshStatsMIBNotifs 1 }
-- ********************************************************************
-- * Compliance statements
-- ********************************************************************
ciscoLwappMeshStatsMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIBConform 1 }
ciscoLwappMeshStatsMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappMeshStatsMIBConform 2 }
ciscoLwappMeshStatsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappMeshStatsMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappMeshNodeStatsGroup,
ciscoLwappMeshNodePktQueueStatsGroup,
ciscoLwappMeshNodeSecStatsGroup,
ciscoLwappMeshStatsConfigObjsGroup,
ciscoLwappMeshStatsNotifsGroup
}
::= { ciscoLwappMeshStatsMIBCompliances 1 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappMeshNodeStatsGroup OBJECT-GROUP
OBJECTS {
clMeshNodeMalformedNeighPkts,
clMeshNodePoorNeighSnrPkts,
clMeshNodeExcludedPkts,
clMeshNodeRxNeighReq,
clMeshNodeRxNeighRsp,
clMeshNodeTxNeighReq,
clMeshNodeTxNeighRsp,
clMeshNodeParentChanges
}
STATUS current
DESCRIPTION
"This collection of objects represent packets
that were transmitted or received between neighbor
mesh nodes."
::= { ciscoLwappMeshStatsMIBGroups 1 }
ciscoLwappMeshNodePktQueueStatsGroup OBJECT-GROUP
OBJECTS {
clMeshNodePktQueueAvg,
clMeshNodePktQueuePeak,
clMeshNodePktQueuePktsDropped,
clMeshNodePktQueueTimeStamp,
clMeshNodePktQueueSize
}
STATUS current
DESCRIPTION
"This collection of objects represent packets
is different types of queues to be transmitted to
neighbor meshnode or to controller."
::= { ciscoLwappMeshStatsMIBGroups 2 }
ciscoLwappMeshNodeSecStatsGroup OBJECT-GROUP
OBJECTS {
clMeshNodeSecTxPkts,
clMeshNodeSecRxPkts,
clMeshNodeAssocReqFailures,
clMeshNodeAssocReqTimeouts,
clMeshNodeAssocReqSuccess,
clMeshNodeAuthReqFailures,
clMeshNodeAuthReqTimeouts,
clMeshNodeAuthReqSuccess,
clMeshNodeReassocReqFailures,
clMeshNodeReassocReqTimeouts,
clMeshNodeReassocReqSuccess,
clMeshNodeReauthReqFailures,
clMeshNodeReauthReqTimeouts,
clMeshNodeReauthReqSuccess,
clMeshNodeUnknownAssocReq,
clMeshNodeInvalidAssocReq,
clMeshNodeUnknownReauthReq,
clMeshNodeInvalidReauthReq,
clMeshNodeUnknownReassocReq,
clMeshNodeInvalidReassocReq
}
STATUS current
DESCRIPTION
"This collection of objects represent packets
that were transmitted or received by a child mesh node
or a parent mesh node during security negotiations."
::= { ciscoLwappMeshStatsMIBGroups 3 }
ciscoLwappMeshStatsConfigObjsGroup OBJECT-GROUP
OBJECTS {
clMeshNodeQueueOverflowNotifEnabled,
clMeshNodeStatsTimeInterval
}
STATUS current
DESCRIPTION
"This collection of objects represent configuration
objects for statistics of mesh network."
::= { ciscoLwappMeshStatsMIBGroups 4 }
ciscoLwappMeshStatsNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoLwappMeshQueueOverflow }
STATUS current
DESCRIPTION
"This collection of objects represent the mesh network
statistics related notifications sent by the agent to a
network management station."
::= { ciscoLwappMeshStatsMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink