MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-MESH-BATTERY-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

523 lines
20 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-MESH-BATTERY-MIB.my
-- September 2006, Young Il Choi
--
-- Copyright (c) 2006, 2007 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-MESH-BATTERY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
cLApSysMacAddress,
cLApName
FROM CISCO-LWAPP-AP-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappMeshBatteryMIB MODULE-IDENTITY
LAST-UPDATED "200703130000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
(LWAPP) tunnel from Light-weight Access Points.
This MIB represents information about the status of the
Multipurpose Power Supply (MPS), used as backup power
supply for an Access Point (AP) in the Wireless Mesh Network.
The MPS reports status information to the AP periodically.
The AP inturn reports the battery status information to the
controller periodically as a part of the LWAPP information packet.
General Infomation about Cisco Wireless Mesh network:
A Mesh AP (MAP) can associate directly with another Root AP (RAP)
or with another MAP AP. Each association of AP (MAP-MAP or RAP-MAP)
with another AP forms parent-child relationship.
The arrangement of the controller
(referred to as CC in the diagram) and mesh nodes
(RAP and MAP) LWAPP APs ,client(MN) and NMS appear
as follows.
+.......+ +.......+
+ + + +
+ NMS + + NMS +
+ + + +
+.......+ +.......+
. .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ RAP + + RAP + + RAP + + RAP + + RAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MAP + + MN + + MAP + + MAP + + MAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . .. .
. . . .. .
. . . .. .
. . . . .
+......+ +......+ +......+ +......+. +......+
+ + + + + + + + + +
+ MAP + + MAP + + MAP + + MAP + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the
configuration, that includes the WLAN parameters, to
the LWAPP APs through the tunnel.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point (AP)
An entity that contains an 802.11 medium access
control (MAC) and physical layer (PHY) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller (CC)
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Mobile Node (MN)
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node
and client are used interchangeably.
Network Management System (NMS)
The station from which the administrator manages the
wired and wireless networks.
Mesh Network
A network of APs where the AP are linked to each other through
wireless links. These wireless links are also called backhaul
links. At least one of these APs must be connected to a
controller through a wired link.
Mesh Node
A mesh node is defined as a physical or logical entity
in the mesh network participating in forming the mesh
backhaul. There are two types of mesh nodes supported
in Cisco mesh network - RAP and MAP.
Root AP (RAP)
The AP forming the bridge between a wired and a mesh
network with an Ethernet interface to the wired
network and a 802.11 radio interface to the mesh
network.
Mesh AP (MAP).
The AP extending wireless coverage similar to a
repeater in a mesh network and consists of a 802.11
uplink and a 802.11 downlink. On a single-radio
backhaul, both uplink and downlink exist on the same
radio and are logical links only. On a multi-radio
backhaul, they may exist on different radios.
REFERENCE
[1] Wireless LAN Medium Access Control (MAC) and
Physical Layer (PHY) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol."
REVISION "200702270000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 620 }
ciscoLwappMeshBatteryMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIB 0 }
ciscoLwappMeshBatteryMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIB 1 }
ciscoLwappMeshBatteryMIBConform OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIB 2 }
ciscoLwappMeshBatteryInfo OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIBObjects 1 }
ciscoLwappMeshBatteryNotifControlConfig OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIBObjects 2 }
-- ********************************************************************
-- * Mesh Node configuration
-- ********************************************************************
clMeshNodeBatteryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClMeshNodeBatteryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about the backup
battery in the 802.11 LWAPP Access Points that have
joined the controller as part of mesh network."
::= { ciscoLwappMeshBatteryInfo 1 }
clMeshNodeBatteryEntry OBJECT-TYPE
SYNTAX ClMeshNodeBatteryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An (conceptual) entry in this table is created when an AP,
which joins the controller is a Mesh AP and has a battery
already installed. The entry gets deleted when the AP loses
its association with the controller or when it fails to
report the serial number of the battery."
INDEX { cLApSysMacAddress }
::= { clMeshNodeBatteryTable 1 }
ClMeshNodeBatteryEntry ::= SEQUENCE {
clMeshNodeBatteryModelName SnmpAdminString,
clMeshNodeBatteryStatus INTEGER ,
clMeshNodeBatteryChargingState INTEGER ,
clMeshNodeBatteryChargingLevel Integer32,
clMeshNodeBatteryRemainingCapacity Unsigned32,
clMeshNodeBatterySwVersion SnmpAdminString,
clMeshNodeBatterySerialNumber SnmpAdminString,
clMeshNodeBatteryInputVoltage Unsigned32,
clMeshNodeBatteryOutputVoltage Unsigned32,
clMeshNodeBatteryOutputPower Unsigned32,
clMeshNodeBatteryInternalVoltage Unsigned32,
clMeshNodeBatteryTemperature Integer32,
clMeshNodeBatteryCurrent Unsigned32
}
clMeshNodeBatteryModelName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the model name of the battery."
::= { clMeshNodeBatteryEntry 1 }
clMeshNodeBatteryStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
normal(2),
overloaded(3),
low(4),
acfail(5),
replace(6),
missing(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the status of the battery.
unknown - Battery status is unknown.
normal - Battery is operating normally and is in
standby mode ready to takeover if
input AC power supply fails.
overloaded - Battery is overloaded when more current than
the specified rating is drawn.
low - Battery has low voltage when the output voltage
is less than 11 Volts.
acfail - External AC power supply has failed.
replace - Battery must be replaced when it does not
recharge fully and is at less than 70% capacity.
missing - One or more batteries in the battery string
is missing. The battery string has normally
4 batteries."
::= { clMeshNodeBatteryEntry 2 }
clMeshNodeBatteryChargingState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
disabled(2),
charging(3),
discharging(4),
charged(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the charging status of
the battery.
unknown - Charging state is unknown,
disabled - Charging is disabled,
charging - Battery is charging,
discharging - Battery is discharging,
charged - Battery is charged"
::= { clMeshNodeBatteryEntry 3 }
clMeshNodeBatteryChargingLevel OBJECT-TYPE
SYNTAX Integer32
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the charging level of
the battery."
::= { clMeshNodeBatteryEntry 4 }
clMeshNodeBatteryRemainingCapacity OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the remaining time of
the battery capacity."
::= { clMeshNodeBatteryEntry 5 }
clMeshNodeBatterySwVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the SW version of
the battery."
::= { clMeshNodeBatteryEntry 6 }
clMeshNodeBatterySerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the serial number of
the battery."
::= { clMeshNodeBatteryEntry 7 }
clMeshNodeBatteryInputVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliVolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AC voltage across the input
terminals the battery."
::= { clMeshNodeBatteryEntry 8 }
clMeshNodeBatteryOutputVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliVolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the voltage across the output (load)
terminals of the battery."
::= { clMeshNodeBatteryEntry 9 }
clMeshNodeBatteryOutputPower OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliWatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the output power of
the battery."
::= { clMeshNodeBatteryEntry 10 }
clMeshNodeBatteryInternalVoltage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliVolts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the internal voltage of
the battery."
::= { clMeshNodeBatteryEntry 11 }
clMeshNodeBatteryTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "degree Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the temperature of the battery
in Celsius."
::= { clMeshNodeBatteryEntry 12 }
clMeshNodeBatteryCurrent OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliAmps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current of
the battery."
::= { clMeshNodeBatteryEntry 13 }
-- ********************************************************************
-- * Trap Control objects
-- ********************************************************************
clMeshBatteryAlarmEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of 'ciscoLwappMeshBatteryAlarm'
notification. A value of 'true' indicates that the notification
will be generated for abnormal battery conditions. A value of 'false'
indicates that the notification will not be generated."
DEFVAL { true }
::= { ciscoLwappMeshBatteryNotifControlConfig 1 }
-- ********************************************************************
-- * NOTIFICATION TYPE objects
-- ********************************************************************
ciscoLwappMeshBatteryAlarm NOTIFICATION-TYPE
OBJECTS {
cLApName,
clMeshNodeBatteryStatus
}
STATUS current
DESCRIPTION
"This notification is sent by the agent when the value of
clMeshNodeBatteryStatus has been changed from 'normal' to
one of the abnormal values ('overloaded', 'low', 'acfail',
'replace', 'missing')."
::= { ciscoLwappMeshBatteryMIBNotifs 1 }
-- ********************************************************************
-- * Compliance statements
-- ********************************************************************
ciscoLwappMeshBatteryMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIBConform 1 }
ciscoLwappMeshBatteryMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappMeshBatteryMIBConform 2 }
ciscoLwappMeshBatteryMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappMeshBatteryMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappMeshBatteryInfoGroup,
ciscoLwappMeshBatteryNotifsConfigGroup,
ciscoLwappMeshBatteryNotifsGroup
}
::= { ciscoLwappMeshBatteryMIBCompliances 1 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappMeshBatteryInfoGroup OBJECT-GROUP
OBJECTS {
clMeshNodeBatteryModelName,
clMeshNodeBatteryStatus,
clMeshNodeBatteryChargingState,
clMeshNodeBatteryChargingLevel,
clMeshNodeBatteryRemainingCapacity,
clMeshNodeBatterySwVersion,
clMeshNodeBatterySerialNumber,
clMeshNodeBatteryInputVoltage,
clMeshNodeBatteryOutputVoltage,
clMeshNodeBatteryOutputPower,
clMeshNodeBatteryInternalVoltage,
clMeshNodeBatteryTemperature,
clMeshNodeBatteryCurrent
}
STATUS current
DESCRIPTION
"This collection of objects represent the
battery specific configuration."
::= { ciscoLwappMeshBatteryMIBGroups 1 }
ciscoLwappMeshBatteryNotifsConfigGroup OBJECT-GROUP
OBJECTS { clMeshBatteryAlarmEnabled }
STATUS current
DESCRIPTION
"This collection of objects represent the objects related to
enabling/disabling battery related notifications sent by the agent
to a network management station."
::= { ciscoLwappMeshBatteryMIBGroups 2 }
ciscoLwappMeshBatteryNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoLwappMeshBatteryAlarm }
STATUS current
DESCRIPTION
"This collection of objects represent the battery
related notifications sent by the agent to a network
management station."
::= { ciscoLwappMeshBatteryMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink