MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

437 lines
14 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB.my
-- Sheeba Kamra Jan 2007
--
-- Copyright (c) 2006-2007 by Cisco Systems, Inc.
--
-- All rights reserved.
-- *****************************************************************
CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappDot11ClientCCXTextualConventions MODULE-IDENTITY
LAST-UPDATED "200703220000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This module defines the textual conventions used
throughout the Cisco enterprise MIBs designed for
implementation on Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points,
specifically for the functions of the Cisco Client
Extensions (CCX) program.
This MIB provides textual conventions used in the
configuration and status information mibs
about the CCX clients that the controller is aware of.
GLOSSARY
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(Ms) and client are used
interchangeably.
Cisco Client eXtentions (CCX)
The Cisco Client Extensions (CCX) Program is a
program of working through silicon providers to
embed Cisco client technology in wireless client
reference designs, and to promote compliant and
interoperable third-party clients with Cisco's
infrastructure, thus further driving wireless adoption
in the market.
Extensible Authentication Protocol (EAP)
The Extensible Authentication Protocol (EAP) is an
Internet Engineering Task Force (IETF) standard that
provides an infrastructure for network access clients and
authentication servers to host plug-in modules for current
and future authentication methods and technologies.
Wired Equivalent Privacy (WEP)
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the data
packets.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
[3] Cisco Compatible Extensions for WLAN Devices
Version 5.0.11"
REVISION "200703220000Z"
DESCRIPTION
"Added 2 more radio types to CiscoLwappDot11ClientRadioType."
REVISION "200702220000Z"
DESCRIPTION
"Reverted some of the enum names to be in line with the CCXV5
spec."
REVISION "200702190000Z"
DESCRIPTION
"Incorporated review comments."
REVISION "200701300000Z"
DESCRIPTION
"Initial version of this mib module."
::= { ciscoMgmt 611 }
CiscoLwappDot11ClientReqStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This field indicates the status of current request.The values
used can be one of the following:
initiate - this will be used to trigger a request to get
some parameters from a CCX client.
inProgress - this indicates that the request to get the
details from the client is still in progress.
success - indicates that the query was executed
successfully.
failed - this indicates that the request to get some
parameters from a CCX client failed.
requestNotProcessedByClient - indicates that the CCX client
did not honour this request."
SYNTAX INTEGER {
initiate(1),
inProgress(2),
success(3),
failure(4),
requestNotProcessedByClient(5)
}
CiscoLwappDot11ClientSSId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This represents the Service Set Identifier assigned
to WLAN."
SYNTAX OCTET STRING (SIZE (1..32))
CiscoLwappDot11ClientAuthMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the authentication method used by the client.
The possible values are:
none - this indicates that no authentication method is
used
preSharedKey - this refers to the method of using pre
shared key for authentication
eap - this is Extensible Authentication Protocol
unknown - this indicates an authentication protocol other
than the ones defined above"
SYNTAX INTEGER {
none(0),
preSharedKey(1),
eap(2),
unknown(255)
}
CiscoLwappDot11ClientEAPMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This identifies the Extensible Authentication Protocol(EAP)
method used. The possible values are:
leap - this is Lightweight Extensible Authentication
Protocol
eapFast - this is Extensible Authentication
Protocol with Flexible Authentication via Secure Tunneling
eapTls - this is Extensible Authentication
Protocol with Transport Layer Security
eapTtls - this is Extensible Authentication Protocol with
Tunneled Transport Layer Security
peap0EapMschap2 - this refers to Protected Extensible
Authentication Protocol Version 0 with Microsoft
Challenge Handshake Authentication Protocol version 2
peap1EapGtc - this refers to Protected Extensible
Authentication Protocol Version 1 with Generic Token Card
eapMd5 - this is Extensible Authentication Protocol with
Message-Digest algorithm 5
eapSim - this is Extensible Authentication Protocol using
the Global System for Mobile Communications (GSM)
Subscriber Identity Module (SIM)
preSharedKey - this refers to the method of using pre
shared key for authentication
unknown - this indicates an EAP method other
than the ones defined above"
SYNTAX INTEGER {
leap(0),
eapFast(1),
eapTls(2),
eapTtls(3),
peap0EapMschap2(4),
peap1EapGtc(5),
eapMd5(6),
eapSim(7),
preSharedKey(8),
unknown(255)
}
CiscoLwappDot11ClientKeyMgmtMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the key management method used by the client.
The possible values are:
staticWep - this is Wired Equivalent Privacy with a static
key defined
dynamicWep - this is Wired Equivalent Privacy with a
dynamic key
wpa - this indicates wifi protected access
wpaCckm - this is wifi protected access with
Cisco Centralized Key Management
wpa2 - this indicates version 2 of wifi protected access
wpa2Cckm - this is wifi protected access
version 2 with Cisco Centralized Key Management
cckm - this indicates Cisco Centralized Key
Management
unknown - this indicates a key management method other
than the ones defined above"
SYNTAX INTEGER {
none(0),
staticWep(1),
dynamicWep(2),
wpa(3),
wpaCckm(4),
wpa2(5),
wpa2Cckm(6),
cckm(7),
unknown(255)
}
CiscoLwappDot11ClientEncryptionMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the encryption method used by the client.
The possible values are:
none - no encryption is used
wep40 - this is Wired Equivalent Privacy with a 40 bit
secret key
wep104 - this is Wired Equivalent Privacy with a 104 bit
secret key
tkip - this indicates Temporal Key Integrity
Protocol
ckip - this is Cisco Key Integrity Protocol
aesCcmp - this is Advanced Encryption Standard
- Counter Mode Cipher Block Chaining-Message Authentication
Code Protocol
unknown - this indicates an encryption method other
than the ones defined above"
SYNTAX INTEGER {
none(0),
wep40(1),
wep104(2),
tkip(3),
ckip(4),
aesCcmp(5),
unknown(255)
}
CiscoLwappDot11ClientCredentialType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This indicates how the 802.11 credentials are configured for
the client.
The possible values are:
localSaved - credentials are locally saved
manuallyPrompted - client is prompted for the credentials
hostOsLogin - this means the host operating system's login
credentials will be used
unknown - this indicates a credential method other
than the ones defined above"
SYNTAX INTEGER {
localSaved(0),
manuallyPrompted(1),
hostOsLogin(2),
unknown(255)
}
CiscoLwappDot11ClientPowerSaveMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the type of power save mode configured on the
client. The possible values are:
awake - this indicates that the client is constantly awake
normal - this indicates normal power save mode
maxPower - this indicates maximum power save mode
uApsd - this indicates Unsolicited Automatic
Power Save Delivery
sApsd - this indicates Solicited Automatic Power
Save Delivery
unknown - this indicates a power save mode other
than the ones defined above"
SYNTAX INTEGER {
awake(0),
normal(1),
maxPower(2),
uApsd(3),
sApsd(4),
unknown(255)
}
CiscoLwappDot11ClientTxPowerMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This field identifies the transmit power mode of the
client. The possible values are:
fixed - this indicates that the client is operating at a
fixed power mode
automatic - this indicates that the client power will be
determined automatically"
SYNTAX INTEGER {
fixed(0),
automatic(1)
}
CiscoLwappDot11ClientRadioType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the radio type of the client. The possible values
are:
unused - this is currently a reserved radio type and is
not used
fhss - this is Frequency-hopping spread spectrum based
radio
dsss - this is Direct Sequence spread spectrum based
radio
infraRedBaseband - this is infrared baseband based radio
oFdm - this is orthogonal frequency division
multiplexing based radio
highRateDsss - this is high rate direct sequence spread
spectrum based radio
erp - this indicates effective radiated power based radio
draft11n2point4Ghz - this indicates a 2.4 Ghz band radio
as defined in draft 802.11n
draft11n5Ghz - this indicates a 5 Ghz band radio
as defined in draft 802.11n"
SYNTAX INTEGER {
unused(0),
fhss(1),
dsss(2),
irBaseband(3),
oFdm(4),
highRateDsss(5),
erp(6),
draft11n2point4Ghz(7),
draft11n5Ghz(8)
}
CiscoLwappDot11ClientDataRates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This field indicates the data rates supported by a
client. If a data rate is supported by a client, the
corresponding bit is set to 1 else it is
set to 0. The different data rates (in Mhz) are 1, 2,
5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54."
SYNTAX BITS {
mhz1(0),
mhz2(1),
mhz5point5(2),
mhz6(3),
mhz9(4),
mhz11(5),
mhz12(6),
mhz18(7),
mhz24(8),
mhz36(9),
mhz48(10),
mhz54(11)
}
END
Reference in New Issue View Git Blame Copy Permalink