MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

282 lines
11 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.my: Dot11 Wireless Clients
-- Calibration MIB
-- December 2005, Devesh Pujari, Prasanna Viswakumar
--
-- Copyright (c) 2005-2006 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
--
CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
TimeInterval,
RowStatus
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;
--********************************************************************
--* MODULE IDENTITY
--********************************************************************
ciscoLwappDot11ClientCalibMIB MODULE-IDENTITY
LAST-UPDATED "200604110000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information provided by this MIB is about the
configuration and monitoring of 802.11 wireless
clients in the network.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(Ms) and client are used
interchangeably.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol "
REVISION "200604110000Z"
DESCRIPTION
"Initial version of this MIB module. "
::= { ciscoMgmt 522 }
ciscoLwappDot11ClientCalibMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIB 0 }
ciscoLwappDot11ClientCalibMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIB 1 }
ciscoLwappDot11ClientCalibMIBConform OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIB 2 }
cldccConfig OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIBObjects 1 }
--********************************************************************
-- Wireless Client Calibration
--********************************************************************
cLD11ClientCalibTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLD11ClientCalibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the calibration for the
802.11 wireless clients that would associate
to the APs that have joined this controller.
An entry is created through an explicit management
action initiated by the administrator through a
network management station by specifying the
calibration parameters for a particular client
identified by cLD11ClientCalibMacAddress and setting
the RowStatus object to 'createAndGo'. An existing
entry is deleted by setting the RowStatus object to
'destroy'. The object cLD11ClientCalibTableMaxEntries
represents the maximum number of entries in this
table. "
::= { cldccConfig 1 }
cLD11ClientCalibEntry OBJECT-TYPE
SYNTAX CLD11ClientCalibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this
table and provides the information about the
calibration parameters for wireless clients. "
INDEX { cLD11ClientCalibMacAddress }
::= { cLD11ClientCalibTable 1 }
CLD11ClientCalibEntry ::=
SEQUENCE {
cLD11ClientCalibMacAddress MacAddress,
cLD11ClientCalibBeaconInterval TimeInterval,
cLD11ClientCalibRowStatus RowStatus
}
cLD11ClientCalibMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the MAC address of the
802.11 wireless client for which the
calibration parameters in this entry are
applicable and uniquely identifies this entry. "
::= { cLD11ClientCalibEntry 1 }
cLD11ClientCalibBeaconInterval OBJECT-TYPE
SYNTAX TimeInterval (400..3240000)
UNITS "hundredths-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the time interval, expressed
here in hundredths of a second at which an AP
issues radio measurement request messages to a
client for every SSID. It is not recommended to
configure values less than 10 seconds (1000).
The value configured through this object is
reflected in the operation of the LWAPP APs only if
cLD11ClientCalibBeaconEnabled is set to 'true'. "
DEFVAL { 60000 }
::= { cLD11ClientCalibEntry 2 }
cLD11ClientCalibRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object that represents the status of a
specific instance of a row in this table.
Initially set to a value of 'createAndGo' by
the User when a row is created, the status
as represented by this object is automatically
set to 'active' if and when the row creation
is successful. To delete the specific instance
of a row, User should set this object to
'destroy'. "
::= { cLD11ClientCalibEntry 3 }
cLD11ClientCalibTableMaxEntries OBJECT-TYPE
SYNTAX Unsigned32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the upper limit on the
number of entries in cLD11ClientCalibTable. "
DEFVAL { 5 }
::= { cldccConfig 2 }
--*******************************************************************
--* Compliance statements
--********************************************************************
ciscoLwappDot11ClientCalibMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIBConform 1 }
ciscoLwappDot11ClientCalibMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappDot11ClientCalibMIBConform 2 }
ciscoLwappDot11ClientCalibMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement this MIB. "
MODULE MANDATORY-GROUPS {
ciscoLwappDot11ClientCalibMIBConfigGroup
}
::= { ciscoLwappDot11ClientCalibMIBCompliances 1 }
--********************************************************************
--* Units of conformance
--********************************************************************
ciscoLwappDot11ClientCalibMIBConfigGroup OBJECT-GROUP
OBJECTS {
cLD11ClientCalibBeaconInterval,
cLD11ClientCalibRowStatus,
cLD11ClientCalibTableMaxEntries
}
STATUS current
DESCRIPTION
"This collection of objects specifies the required
calibration parameters for the 802.11 wireless
clients. "
::= { ciscoLwappDot11ClientCalibMIBGroups 1 }
END
Reference in New Issue View Git Blame Copy Permalink