mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
1583 lines
61 KiB
Plaintext
1583 lines
61 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-ITP-TC-MIB: Mib for SS7 SP support entities
|
|
--
|
|
-- June 2001, John Linton, Shekhar Acharya
|
|
--
|
|
-- Copyright (c) 2001, 2002-2003, 2004 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
CISCO-ITP-TC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Integer32,
|
|
MODULE-IDENTITY,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
ciscoItpTextualConventions MODULE-IDENTITY
|
|
LAST-UPDATED "200404260000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems, Inc
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-ss7@cisco.com"
|
|
|
|
DESCRIPTION
|
|
"The defines textual conventions used by to manage
|
|
devices related to the SS7 network. The
|
|
relevant ITU documents describing this technology is
|
|
the ITU Q series, including ITU Q.700: Introduction to
|
|
CCITT Signalling System No. 7 and ITU Q.701 Functional
|
|
description of the message transfer part (MTP) of
|
|
Signalling System No. 7.
|
|
|
|
Abbreviations:
|
|
CDPA - Called Party Point Code
|
|
CGPA - Calling Party Point Code
|
|
CLLI - Common Language Location Codes
|
|
CR - Connection Request message
|
|
CREF - Connection Refusal message
|
|
DPC - Destination Point Code
|
|
ERR - Error message
|
|
GTA - Global Title Address
|
|
GTI - Global Title Indicator
|
|
GTT - Global Title Translation
|
|
LUDT - long unitdata message
|
|
LUDTS - long unitdata service message
|
|
M2PA - MTP2 Peer-to-Peer Adaptation Layer
|
|
M3UA - MTP3-User Adaptation
|
|
MAP - Mated Application Table
|
|
MSU - Message Signal Unit
|
|
MTP - Message Transport Protocol
|
|
MTP2 - Layer 2 of Message Transport Protocol
|
|
MTP3 - Layer 3 of Message Transport Protocol
|
|
NAI - Nature of Address Indicator
|
|
NP - Numbering Plan
|
|
NTT - The Japanese Nippon Telephone & Telegraph
|
|
OPC - Originating Point Code
|
|
PC - Point Code
|
|
RTN - Route Table Name
|
|
RSR - Reset Request message
|
|
SCCP - Signalling Connection Control Part
|
|
SCTP - Stream Transmission Protocol(RFC 2960)
|
|
SI - Signalling Indicator
|
|
SP - Signalling Point
|
|
SLC - Signalling Link Code
|
|
SLS - Signalling Link Selector
|
|
SSN - Subsystem Number
|
|
SUA - SCCP-User Adaptation
|
|
TFR - Transfer Restricted messages
|
|
TT - Title Translation
|
|
TTC - The Japanese Telecommunications Technology
|
|
Committee
|
|
UDT - unitdata message
|
|
UDTS - unitdata service message
|
|
XUDT - extended unitdata message
|
|
XUDTS - extended unitdata service message
|
|
"
|
|
REVISION "200404260000Z"
|
|
DESCRIPTION
|
|
"Updated CItpTcPointCodeType to allow M3UA and
|
|
SUA point-code types."
|
|
|
|
REVISION "200308030000Z"
|
|
DESCRIPTION
|
|
"Updated CItpTcPointCode textual convention to
|
|
include descriptions for Japanese NTT and TTC
|
|
variants."
|
|
|
|
REVISION "200301290000Z"
|
|
DESCRIPTION
|
|
"Added textual convention used to support the
|
|
ability to define multiple instances of the
|
|
signalling points. The following textual conventions
|
|
were added.
|
|
CItpTcNetworkName
|
|
CItpTcInstanceNumber
|
|
CItpTcSls
|
|
|
|
Also deprecated CItpTcGtaAddr and CItpTcGtaDisplayZB.
|
|
Added CItpTcGtaLongAddr and CItpTcGtaLongDisplay.
|
|
|
|
Added new enumerated value to CItpTcLinkType object
|
|
for virtual link used to connect signalling points
|
|
acting as gateways."
|
|
|
|
REVISION "200112110000Z"
|
|
|
|
DESCRIPTION
|
|
"Added new enumerated value to CItpTcLinkType object
|
|
for high speed link support. Add new enumerated
|
|
value to the CItpTcSs7Variant object to support
|
|
China national variant. A new textual convention has
|
|
been added to address 0..15 range for Global Title
|
|
addresses."
|
|
|
|
REVISION "200110010000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 231 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * *
|
|
-- * Textual Conventions *
|
|
-- * *
|
|
-- ********************************************************************
|
|
CItpTcAclId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An numeric Identifier used to specify an access list
|
|
used to permit and deny packets based on MTP3
|
|
information. Either the value 0 or the value of access list
|
|
identifier. A value of zero indicates that an access list
|
|
is not specified."
|
|
SYNTAX Unsigned32 (0 | 2700..2999)
|
|
|
|
CItpTcCLLI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Common Language Location Codes (CLLI Codes).
|
|
An 11-character standardized geographic identifier
|
|
that uniquely identifies the geographic location of
|
|
telecommunication equipment.
|
|
|
|
The CLLI code is supported as octet string containing
|
|
administrative information in human-readable form.
|
|
|
|
The use of control codes should be avoided.
|
|
|
|
The use of newline should be avoided.
|
|
|
|
The use of leading or trailing white space should
|
|
be avoided."
|
|
REFERENCE
|
|
"Complete listings of geographical and geopolitical
|
|
codes can be found in the BR 751-401-xxx series and
|
|
BR 751-100-055, respectively."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..11 ) )
|
|
|
|
CItpTcDisplayPC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Point Code in formatted based on the variant
|
|
and the customer defined parameters."
|
|
SYNTAX OCTET STRING ( SIZE ( 1..12 ) )
|
|
|
|
CItpTcEncodingSchemeValue ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encoding scheme value."
|
|
SYNTAX Integer32 (0..15)
|
|
|
|
CItpTcGlobalTitleSelector ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Global Title Selector.
|
|
'nai' : Global title translation based on
|
|
nature of address indicator.
|
|
|
|
'tt' : Global title translation based on
|
|
translation type.
|
|
|
|
'ttNpEs' : Global title translation based on
|
|
translation type, numbering plan
|
|
value and Encoding Scheme Value.
|
|
|
|
'ttNpNaiEs' : Global title translation based on
|
|
translation type, numbering plan,
|
|
value, nature of address indicator
|
|
and encoding scheme value."
|
|
|
|
SYNTAX INTEGER {
|
|
nai(1),
|
|
tt(2),
|
|
ttNpEs(3),
|
|
ttNpNaiEs(4)
|
|
}
|
|
|
|
CItpTcGlobalTitleSelectorName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured name associated with SCCP GTT
|
|
Selector.
|
|
|
|
An octet string specified by an administrator that
|
|
must be in human-readable form. The names must
|
|
conform to the allowed characters that can be
|
|
specified via Command Line Interface(CLI). The
|
|
names cannot contain control character and should
|
|
not contain leading or trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE ( 1..9 ) )
|
|
|
|
CItpTcGtaAddr ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated -- superceded by CItpTcGtaLongAddr
|
|
DESCRIPTION
|
|
"The configured digits in the SCCP GTT
|
|
Global Title Address.
|
|
|
|
An octet string specified by an administrator
|
|
must be in human-readable form. The names must
|
|
conform to the allowed characters that can be
|
|
specified via Command Line Interface(CLI). The
|
|
names cannot contain control character and should
|
|
not contain leading or trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE ( 8 ) )
|
|
|
|
CItpTcGtaLongAddr ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured hexadecimal digits in the SCCP GTT
|
|
Global Title Address."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..64 ) )
|
|
|
|
CItpTcGtaDisplay ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The configured digits in the SCCP GTT
|
|
Global Title Address. It consists of ASCII
|
|
representation of GTA hex digits.
|
|
|
|
This textual convention has been deprecated and
|
|
replaced by CItpTcGtaDisplayZB."
|
|
SYNTAX OCTET STRING ( SIZE ( 1..15 ) )
|
|
|
|
CItpTcGtaDisplayZB ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated -- superceded by CItpTcGtaLongDisplay
|
|
DESCRIPTION
|
|
"The configured digits in the SCCP GTT
|
|
Global Title Address. It consists of ASCII
|
|
representation of GTA hex digits."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..15 ) )
|
|
|
|
CItpTcGtaLongDisplay ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured digits in the SCCP GTT
|
|
Global Title Address. It consists of ASCII
|
|
representation of GTA hex digits."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..64 ) )
|
|
|
|
CItpTcGtaDisplayLen ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP GTT Global Title Address length."
|
|
SYNTAX Unsigned32 ( 1..15 )
|
|
|
|
CItpTcGtaLongDisplayLen ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP GTT Global Title Address length."
|
|
SYNTAX Unsigned32 ( 0..64 )
|
|
|
|
CItpTcNetworkName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network name is used to indicate the network
|
|
in which this signalling point is participating.
|
|
One or more instances of signalling points can
|
|
exist in the same physical device. This identifier
|
|
will be used to correlate instances of signalling
|
|
points by network.
|
|
|
|
When multiple instance support is not enable the
|
|
network name will default to the null string.
|
|
|
|
An octet string specified by an administrator that
|
|
must be in human-readable form. The names must conform
|
|
to the allowed characters that can be specified via
|
|
Command Line Interface(CLI). The names cannot contain
|
|
control character and should not contain leading or
|
|
trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..19 ) )
|
|
|
|
CItpTcInstanceNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance number used to select a particular
|
|
Signalling point."
|
|
SYNTAX Unsigned32 ( 0..255 )
|
|
|
|
CItpTcLinksetId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured name associated with an Signalling
|
|
Point Linkset.
|
|
|
|
An octet string specified by an administrator that must
|
|
be in human-readable form. The names must conform to
|
|
the allowed characters that can be specified via
|
|
Command Line Interface(CLI). The names cannot contain
|
|
control character and should not contain leading or
|
|
trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE ( 1..19 ) )
|
|
|
|
CItpTcLinkSLC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Signalling Link Code. This is the link identifier
|
|
within a linkset."
|
|
SYNTAX Unsigned32 ( 0..15 )
|
|
|
|
CItpTcLinkType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link types.
|
|
'other' : This link is of some type not listed below.
|
|
'serial' : This link is a serial link transporting
|
|
SS7 traffic.
|
|
'sctpIp' : This a SCTP/IP link transporting
|
|
SS7 traffic.
|
|
'hsl' : This link is a high speed link using the ATM
|
|
protocol for transporting SS7 traffic.
|
|
'virtual': This link is virtual link used to connect to
|
|
instance of signalling point running on the
|
|
same physical device. The link will be used to
|
|
send and manage traffic between two signalling
|
|
acting as a gateway."
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
serial(2),
|
|
sctpIp(3),
|
|
hsl(4),
|
|
virtual(5)
|
|
}
|
|
|
|
CItpTcNAI ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP GTT Network Address Indicator (NAI).
|
|
The following values are generally used:
|
|
Unknown Nature of Address (0),
|
|
Subscriber Number (1),
|
|
Reserved for national use (2),
|
|
National Significant Number (3),
|
|
International Number (4),
|
|
Maximum NAI (127),
|
|
Invalid NAI (253),
|
|
Wild NAI (254)."
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
CItpTcNetworkIndicator ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Indicator:
|
|
international - International network
|
|
national - National network
|
|
reserved - Reserved for national use
|
|
spare - Spare (for international use only)
|
|
'international' : International network
|
|
'internationalSpare' : International network spare
|
|
'national' : National network
|
|
'nationalSpare' : National network Spare"
|
|
|
|
SYNTAX INTEGER {
|
|
international(0),
|
|
internationatSpare(1),
|
|
national(2),
|
|
nationalSpare(3)
|
|
}
|
|
|
|
CItpTcNumberingPlan ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP GTT Numbering Plan (NP).
|
|
The following values are generally used:
|
|
Unknown NP (0),
|
|
ISDN/Telephony NP (1),
|
|
Spare (2),
|
|
Data NP (3),
|
|
Telex NP (4),
|
|
Maritime Mobile NP (5),
|
|
Land Mobile NP (6),
|
|
ISDN/Mobile NP (7),
|
|
Private NP (8).
|
|
Max NP (15),
|
|
Invalid NP (253),
|
|
Wild NP (254)."
|
|
SYNTAX Integer32 (0..255)
|
|
|
|
CItpTcPointCode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SS7 network node address as specified in the
|
|
following references. The format of the Point
|
|
code depends on the variant defined in the
|
|
CgspSS7Variant object as follows.
|
|
|
|
33222222222211111111110000000000
|
|
10987654321098765432109876543210
|
|
ANSI: nnnnnnnn - Network
|
|
cccccccc - Cluster
|
|
mmmmmmmm - Member
|
|
ITU: zzz - Zone
|
|
aaaaaaaa - Area/Network
|
|
iii - Identifier
|
|
NTT: zzzzz - Zone
|
|
aaaa - Area/Network
|
|
iiiiiii - Identifier
|
|
TTC: zzzzz - Zone
|
|
aaaa - Area/Network
|
|
iiiiiii - Identifier
|
|
|
|
Note: The China variant has the same format as ANSI.
|
|
|
|
This form of the point-code is not intended for
|
|
for presentation."
|
|
|
|
REFERENCE
|
|
"The SS7 network node address as specified in the
|
|
International Telecommunication Union standard Q.708:
|
|
Specifications of Signalling System No. 7 - Numbering
|
|
of International Signalling Point Codes, and by ANSI
|
|
T1.111.8 Numbering of Signalling Point Codes.
|
|
|
|
GF 001-9001 - Technical Specifications of Signalling
|
|
System No. 7 for National Telephone Network of China."
|
|
SYNTAX Unsigned32 ( 0..16777216)
|
|
|
|
CItpTcPointCodeMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mask used to perform different operations on
|
|
pointcodes."
|
|
|
|
REFERENCE
|
|
"The SS7 network node address as specified in the
|
|
International Telecommunication Union standard Q.708:
|
|
Specifications of Signalling System No. 7 - Numbering
|
|
of International Signalling Point Codes, and by ANSI
|
|
T1.111.8 Numbering of Signalling Point Codes."
|
|
SYNTAX Unsigned32 ( 0..16777216)
|
|
|
|
CItpTcPointCodeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of the possible Point Code types.
|
|
'primary' : The primary point used to communicate
|
|
information on the Signalling point.
|
|
'additional' : Additional point codes.
|
|
'capability' : capability point codes.
|
|
'xua' : MTP3-User Adaptation point codes or
|
|
SCCP-User Adaptation point codes."
|
|
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
additional(2),
|
|
capability(3),
|
|
xua(4)
|
|
}
|
|
|
|
CItpTcQos ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The quality of service classification to be assigned
|
|
to the IP packets used to transport the SS7 messages.
|
|
The value can be from one to seven when selecting
|
|
a Qos class or 255 to indicate the packet will not
|
|
be assigned a Qos class. This value will be set to
|
|
zero when cItpSpLinkType indicates that
|
|
Quality of Service does not apply to this link."
|
|
SYNTAX Unsigned32 (0..7 | 255)
|
|
|
|
CItpTcRouteTableName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured name associated with an SP Route
|
|
Table.
|
|
|
|
An octet string specified by an administrator that must
|
|
be in human-readable form. The names must conform to
|
|
the allowed characters that can be specified via
|
|
Command Line Interface(CLI). The names cannot contain
|
|
control character and should not contain leading or
|
|
trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE (1..19) )
|
|
|
|
CItpTcServiceIndicator ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of possible Service Indicator values. This
|
|
identifies the type of SS7 packet.
|
|
|
|
The service indicator codes for the international
|
|
Signalling network are allocated as follows:
|
|
|
|
'SNMM' : Signalling network management
|
|
messages (SNMM)
|
|
'SNTM' : Signalling network testing and
|
|
maintenance messages (SNTM)
|
|
'Spare2' : Spare 2
|
|
'SCCP' : SCCP
|
|
'TUP' : Telephone User Part (TUP)
|
|
'ISUP' : ISDN User Part (ISUP)
|
|
'DUPC' : Data User Part, call and circuit-related
|
|
messages (DUPC)
|
|
'DUPF' : Data User Part, facility registration and
|
|
cancellation messages (DUPF)
|
|
'MTUP' : Reserved for MTP Testing User Part (MTUP)
|
|
'BISUP' : Broadband ISDN User Part (BISUP)
|
|
'SISUP' : Satellite ISDN User Part (SISUP)
|
|
'Spare11' : Spare 11
|
|
'Spare12' : Spare 12
|
|
'Spare13' : Spare 13
|
|
'Spare14' : Spare 14
|
|
'Spare15' : Spare 15"
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages section
|
|
14.2.1 Service indicator."
|
|
SYNTAX INTEGER {
|
|
snmm(0),
|
|
sntm(1),
|
|
spare2(2),
|
|
sccp(3),
|
|
tup(4),
|
|
isup(5),
|
|
dupc(6),
|
|
dupf(7),
|
|
mtup(8),
|
|
bisup(9),
|
|
sisup(10),
|
|
spare11(11),
|
|
spare12(12),
|
|
spare13(13),
|
|
spare14(14),
|
|
spare15(15)
|
|
}
|
|
|
|
CItpTcSls ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Signalling Link Selector is a numeric value that
|
|
contains the MTP3 packets to allow load balancing of
|
|
traffic across a link within a linkset or combined linkset.
|
|
Each linkset provides one or more tables used to map
|
|
Signalling Link Selectors to Signalling Link Codes. The
|
|
number of Signalling Link Selectors is 16 for ITU and 256
|
|
for ANSI."
|
|
SYNTAX Unsigned32 (0..255)
|
|
|
|
CItpTcSs7Variant ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of SS7 variants.
|
|
'ANSI' : The ANSI variant of the SS7 specification.
|
|
'ITU' : The ITU variant of the SS7 specification.
|
|
'China' : The China national variant. This variant
|
|
is a combination of ITU and ANSI. The
|
|
protocol matches ITU except where the
|
|
point-code has been expanded to ANSI format."
|
|
REFERENCE
|
|
"GF 001-9001 - Technical Specifications of Signalling
|
|
System No. 7 for National Telephone Network of China."
|
|
SYNTAX INTEGER {
|
|
ansi(1),
|
|
itu(2),
|
|
china(3)
|
|
}
|
|
|
|
|
|
CItpTcSubSystemNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP Subsystem Number . A value of zero
|
|
indicates that a subsystem is not specified."
|
|
SYNTAX Unsigned32 (0 | 2..255 )
|
|
|
|
CItpTcSubSystemNumberMask ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SCCP Subsystem Number Mask."
|
|
SYNTAX Unsigned32 ( 2..255 )
|
|
|
|
CItpTcTableLoadStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the current or prior load operation.
|
|
'loadNotRequested' : load operations have not been
|
|
requested.
|
|
|
|
'loadInProgress' : load request is active.
|
|
|
|
'loadComplete' : load request complete without errors.
|
|
|
|
'loadCompleteWithErrors' : Load request completed with
|
|
some type of errors that
|
|
prevented the adding of one
|
|
or more entries.
|
|
|
|
'loadFailed' : Load request failed."
|
|
|
|
SYNTAX INTEGER {
|
|
loadNotRequested(1),
|
|
loadInProgress(2),
|
|
loadComplete(3),
|
|
loadCompleteWithErrors(4),
|
|
loadFailed(5)
|
|
}
|
|
|
|
CItpTcTimerMtp2T01 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alignment ready timer. The default and valid range is
|
|
dependant on the value of variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 12500 16000 13000
|
|
ITU 40000 50000 40000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI, ITU variants and MTP2 Peer-to-Peer
|
|
Adaptation Layer."
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (5000..150000)
|
|
|
|
|
|
CItpTcTimerMtp2T02 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not aligned timer. The default and valid range is
|
|
dependant on the value of variant.
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 5000 14000 11500
|
|
ITU 5000 150000 5000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants."
|
|
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 5000..150000)
|
|
|
|
CItpTcTimerMtp2T03 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Aligned timer. The default and valid range is
|
|
dependant on the value of variant.
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 5000 14000 11500
|
|
ITU 1000 2000 1500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 1000..14000)
|
|
|
|
CItpTcTimerMtp2T04E ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Proving period timer emergency timer. The default and
|
|
valid range is dependant on the value of
|
|
variant.
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 540 660 600
|
|
ITU 400 600 500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 400..660)
|
|
|
|
CItpTcTimerMtp2T04N ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Proving period timer normal timer. The default and
|
|
valid range is dependant on the value of
|
|
variant.
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 2007 2530 2300
|
|
ITU 7500 9500 8200
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 2007..9500)
|
|
|
|
CItpTcTimerMtp2T05 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sending SIB timer. The default and valid range is
|
|
dependant on the value of variant.
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 80 120 80
|
|
ITU 80 120 100
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 80..120)
|
|
|
|
CItpTcTimerMtp2T06 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote congestion timer. The default and valid range is
|
|
dependant on the value of variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 1000 6000 1000
|
|
ITU 3000 6000 3000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI, ITU variants and MTP2 Peer-to-Peer
|
|
Adaptation Layer."
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 ( 1000..6000 )
|
|
|
|
CItpTcTimerMtp2T07 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excessive delay of acknowledgement timer. The default
|
|
and valid range is dependant on the value of
|
|
variant().
|
|
|
|
This timer is only applicable if cItpTcLinkType
|
|
is serial. A get on this object will return a
|
|
zero if the link is not serial.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 2000 1000
|
|
ITU 500 2000 1000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants."
|
|
REFERENCE
|
|
"ITU Q.703 Signalling Link.
|
|
ANSI T1.111.3 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
|
|
SYNTAX Unsigned32 (0 | 100..6000)
|
|
|
|
CItpTcTimerMtp3T01 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay to avoid message mis-sequencing on changeover.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 1200 800
|
|
ITU 500 1200 800
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..1200)
|
|
|
|
CItpTcTimerMtp3T02 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for changeover acknowledgement.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 700 2000 1400
|
|
ITU 700 2000 1400
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (700..2000)
|
|
|
|
CItpTcTimerMtp3T03 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time controlled diversion-delay to avoid
|
|
mis-sequencing on change back.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 1200 800
|
|
ITU 500 1200 800
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..1200)
|
|
|
|
CItpTcTimerMtp3T04 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for change back acknowledgement (first
|
|
attempt).
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 1200 800
|
|
ITU 500 1200 800
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..1200)
|
|
|
|
CItpTcTimerMtp3T05 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for change back acknowledgement (second
|
|
attempt).
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 1200 800
|
|
ITU 500 1200 800
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..1200)
|
|
|
|
CItpTcTimerMtp3T06 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay to avoid message mis-sequencing on controlled
|
|
rerouting.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 500 1200 800
|
|
ITU 500 1200 800
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..1200)
|
|
|
|
CItpTcTimerMtp3T07 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for Signalling data link connection
|
|
acknowledgement.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 1000 2000 1500
|
|
ITU 1000 2000 1500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. A value of zero
|
|
indicates a value is not defined for a particular
|
|
variant or is not supported by the implementation."
|
|
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (0 | 1000..2000)
|
|
|
|
CItpTcTimerMtp3T08 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer prohibited inhibition timer (transient
|
|
solution).
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 800 1200 1000
|
|
ITU 800 1200 1000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (800..1200)
|
|
|
|
CItpTcTimerMtp3T10 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting to repeat Signalling routeset test message.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 30000 60000 45000
|
|
ITU 30000 60000 45000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (30000..60000)
|
|
|
|
CItpTcTimerMtp3T11 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transfer restricted timer. (This is one way of
|
|
implementing the function described in 13.4/Q.704 and
|
|
mainly intended to simplify SPs.).
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 30000 90000 60000
|
|
ITU 30000 90000 60000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (30000..90000)
|
|
|
|
CItpTcTimerMtp3T12 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for uninhibit acknowledgement.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 800 1500 1150
|
|
ITU 800 1500 1150
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (800..1500)
|
|
|
|
CItpTcTimerMtp3T13 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for force uninhibit.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 800 1500 1150
|
|
ITU 800 1500 1150
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (800..1500)
|
|
|
|
CItpTcTimerMtp3T14 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for inhibition acknowledgement.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 2000 3000 2500
|
|
ITU 2000 3000 2500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (2000..3000)
|
|
|
|
CItpTcTimerMtp3T15 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting to start Signalling routeset congestion
|
|
test. Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 2000 3000 2500
|
|
ITU 2000 3000 2500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (2000..3000)
|
|
|
|
CItpTcTimerMtp3T16 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Waiting for routeset congestion status update.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 1400 2000 1700
|
|
ITU 1400 2000 1700
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (1400..2000)
|
|
|
|
CItpTcTimerMtp3T17 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay to avoid oscillation of initial alignment
|
|
failure and link restart.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 800 1500 1150
|
|
ITU 800 1500 1150
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (800..1500)
|
|
|
|
CItpTcTimerMtp3T18 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: Repeat TFR once by response method
|
|
ITU: MTP restart link supervision
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 2000 20000 11000
|
|
ITU 1000 31000 30000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (1000..31000)
|
|
|
|
CItpTcTimerMtp3T19 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: failed craft timer referral timer
|
|
ITU: supervision timer during MTP restart
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 480000 600000 540000
|
|
ITU 67000 69000 68000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (67000..600000)
|
|
|
|
CItpTcTimerMtp3T20 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: waiting to repeat local inhibit test
|
|
ITU: MTP restart timer at the Signalling point
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 90000 120000 105000
|
|
ITU 1000 61000 60000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (1000..120000)
|
|
|
|
CItpTcTimerMtp3T21 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: waiting to repeat remote inhibit test)
|
|
ITU: MTP restart timer at adjacent Signalling point
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 90000 120000 105000
|
|
ITU 63000 65000 64000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (63000..120000)
|
|
|
|
CItpTcTimerMtp3T22 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: restarting SP waiting for Signalling links avail
|
|
ITU: local inhibit test timer
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 36000 60000 30000
|
|
ITU 80000 360000 300000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (36000..360000)
|
|
|
|
CItpTcTimerMtp3T23 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: restarting SP waiting to receive all TRA msgs
|
|
ITU: remote inhibit test timer
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 9000 60000 30000
|
|
ITU 80000 360000 300000
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (9000..360000)
|
|
|
|
CItpTcTimerMtp3T24 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timers servers different function based on the
|
|
variant.
|
|
|
|
ANSI: restarting SP waiting to broadcast all TRA msgs
|
|
ITU: stabilizing timer after local processor outage
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 9000 60000 30000
|
|
ITU 500 500 500
|
|
|
|
The SYNTAX statement allows values for both
|
|
the ANSI and ITU variants. "
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (500..60000)
|
|
|
|
CItpTcTimerMtp3T25 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timer at Signalling Point (SP) adjacent to restarting
|
|
SP, waiting for traffic restart allowed message.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 30000 35000 30000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by the
|
|
implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 30000..35000)
|
|
|
|
CItpTcTimerMtp3T26 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timer at restarting SP waiting to repeat traffic
|
|
restart waiting message.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 12000 15000 12000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 12000..15000)
|
|
|
|
CItpTcTimerMtp3T27 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum duration of unavailability for full restart.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 2000 50000 4000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 2000..50000)
|
|
|
|
CItpTcTimerMtp3T28 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timer at SP adjacent to restarting SP waiting for
|
|
traffic restart waiting message.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 3000 35000 30000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 3000..35000)
|
|
|
|
CItpTcTimerMtp3T29 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timer started when TRA sent in response to unexpected
|
|
TRA or TRW.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 60000 65000 63000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 60000..65000)
|
|
|
|
CItpTcTimerMtp3T30 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Timer to limit sending of TFPs and TFRs in response
|
|
to unexpected TRA or TRW.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 30000 35000 33000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 30000..35000)
|
|
|
|
CItpTcTimerMtp3T31 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"False link congestion detection timer.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 10000 120000 60000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 10000..120000)
|
|
|
|
CItpTcTimerMtp3T32 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link oscillation timer - Procedure A.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 5000 120000 60000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 5000..120000)
|
|
|
|
CItpTcTimerMtp3T33 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Probation timer for link oscillation - Procedure B.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 60000 600000 300000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 60000..600000)
|
|
|
|
CItpTcTimerMtp3T34 ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Suspension timer for link oscillation - Procedure B.
|
|
Ranges by variant.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 5000 120000 60000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)"
|
|
SYNTAX Unsigned32 (0 | 5000..120000)
|
|
|
|
CItpTcTimerLinkTest ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signalling Link test acknowledgement timer.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 4000 12000 8000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (0 | 4000..12000)
|
|
|
|
CItpTcTimerLinkMessage ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval timer for sending test messages.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 30000 90000 60000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (0 | 30000..90000)
|
|
|
|
CItpTcTimerLinkActRetry ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Link activation retry timer.
|
|
|
|
Min Max Def
|
|
------ ------ ------
|
|
ANSI 60000 90000 60000
|
|
|
|
This timer is not used when the variant is ITU.
|
|
A value of zero indicates a value is not defined
|
|
for a particular variant or is not supported by
|
|
the implementation."
|
|
REFERENCE
|
|
"ITU Q.704 Signalling network functions and messages.
|
|
ANSI T1.111 Telecommunications - Signalling system
|
|
No. 7 (SS7)-Message Transfer Part (MTP)."
|
|
SYNTAX Unsigned32 (0 | 60000..90000)
|
|
|
|
CItpTcTranslationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Translation Type for SCCP GTT GTA specifies Title
|
|
Translation or Subsystem Number (SSN)
|
|
'tt' : The GTT GTA has specified Title Translation
|
|
'ssn' : The GTT GTA has specified Subsystem Number."
|
|
SYNTAX INTEGER {
|
|
tt(1),
|
|
ssn(2)
|
|
}
|
|
|
|
CItpTcURL ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The URL used to load a configuration file.
|
|
|
|
An octet string specified by an administrator that must
|
|
be in human-readable form. The names must conform to
|
|
the allowed characters that can be specified via
|
|
Command Line Interface(CLI). The names cannot contain
|
|
control character and should not contain leading or
|
|
trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE (0..255) )
|
|
|
|
CItpTcXuaName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured name associated with M3UA/SUA
|
|
ASP or AS name.
|
|
|
|
An octet string specified by an administrator that
|
|
must be in human-readable form. The names must
|
|
conform to the allowed characters that can be
|
|
specified via Command Line Interface(CLI). The
|
|
names cannot contain control character and should
|
|
not contain leading or trailing white space."
|
|
SYNTAX OCTET STRING ( SIZE ( 0..12 ) )
|
|
|
|
END
|