MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ITP-MSU-RATES-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

973 lines
35 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-ITP-MSU-RATES-MIB: MIB for tracking MTP3 MSU rates per
-- Processor
--
-- January 2006, John Linton, Shekhar Acharya
--
-- Copyright (c) 2006-2007 by Cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
--
-- ****************************************************************
CISCO-ITP-MSU-RATES-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Gauge32,
Integer32,
Unsigned32,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TimeStamp,
TruthValue
FROM SNMPv2-TC
EntPhysicalIndexOrZero
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoItpMsuRatesMIB MODULE-IDENTITY
LAST-UPDATED "200702010000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ss7@cisco.com"
DESCRIPTION
"This MIB provides information used to manage the number
of MTP3 MSUs transmitted and received per processor. Many
of the higher level protocols require several MSUs per
transaction. Traffic capacity planning is based on MSUs
not transactions. This MIB will provide information to
determine current traffic.
The Cisco IP Transfer Point (ITP) is a hardware and
software solution that transports SS7 traffic using
IP. Each ITP node provides function similar to SS7
signalling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signalling System No. 7."
REVISION "200702010000Z"
DESCRIPTION
"Add cimrMsuTrafficMSUs to cimrMsuTrafficTable and create"
REVISION "200605310000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 529 }
-- Top-level structure of the MIB
ciscoItpMsuRatesMIBNotifs OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIB 0 }
ciscoItpMsuRatesMIBObjects OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIB 1 }
ciscoItpMsuRatesMIBConform OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIB 2 }
cimrScalars OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIBObjects 1 }
cimrTables OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIBObjects 2 }
-- *************************************************************
-- * *
-- * Textual Conventions *
-- * *
-- *************************************************************
CimrMsuThreshold ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention defines a threshold used to
monitor the rate of MSUs per second. The zero value
is used to indicate that value has not been specified.
It is important to note that the MSU thresholds should
be based on processor type, routing protocols and system
environments."
SYNTAX Unsigned32 (0 | 100..4294967295 )
CimrMsuRateState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"MSU Rate State:
'acceptable' - traffic for a specified direction is
at the acceptable level.
'warning' - traffic for a specified direction is
has reached or exceed warning level but is below
the overloaded level.
'overloaded' - traffic for a specified direction
has reached or exceeds overloaded level"
SYNTAX INTEGER {
acceptable(1),
warning(2),
overloaded(3)
}
CirbhMsuTrafficDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Direction of traffic on an processor."
SYNTAX INTEGER {
receive(1),
transmit(2)
}
CirbhMsuCurrentCount ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this counter starts from zero and is
increased when associated events occur,
until and administrative operation in performed
that requires the associated objects to be cleared."
SYNTAX Gauge32
-- *************************************************************
-- * *
-- * Scalars *
-- * *
-- *************************************************************
cimrMsuRateSampleInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..60 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of the interval used to calculate MSU rate."
DEFVAL { 5 }
::= { cimrScalars 4 }
cimrMsuRateNotifyInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 60..3600 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of the interval used to suppress
ciscoItpMsuRcvdRateState and ciscoItpMsuSentRateState
notifications."
DEFVAL { 900 }
::= { cimrScalars 5 }
cimrMsuRateNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MSU rate notification truth value. This object
controls the generation of ciscoItpMsuRcvdRateState
and ciscoItpMsuSentRateState notifications.
'true' Indicates that the notification of MSU rates
has been enabled.
'false' Indicates that the notification MSU rates
has been disabled."
DEFVAL { false }
::= { cimrScalars 6 }
cimrMsuRateAcceptableThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to establish a default value for all
instances of the cimrMsuProcAcceptableThreshold object in the
cimrMsuProcTable table. The value for this object must be
less than the values specified by cimrMsuRateWarningThreshold
and cimrMsuRateOverloadedThreshold objects. All changes to
this threshold will take effect at the end of the current
interval."
DEFVAL { 0 }
::= { cimrScalars 7 }
cimrMsuRateWarningThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to establish a default value for all
instances of the cimrMsuProcWarningThreshold object in the
cimrMsuProcTable table. The value for this object must be
less than the values specified by
cimrMsuRateOverloadedThreshold and greater than
cimrMsuRateAcceptableThreshold objects. All changes to
this threshold will take effect at the end of the current
interval."
DEFVAL { 0 }
::= { cimrScalars 8 }
cimrMsuRateOverloadedThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to establish a default value for all
instances of the cimrMsuProcOverloadedThreshold object in the
cimrMsuProcTable table. The value for this object must be
greater than the values specified by
cimrMsuRateAcceptableThreshold and
cimrMsuRateWarningThreshold objects. All changes to
this threshold will take effect at the end of the current
interval."
DEFVAL { 0 }
::= { cimrScalars 9 }
-- *************************************************************
-- * *
-- * MSU Processor table *
-- * *
-- *************************************************************
cimrMsuProcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CimrMsuProcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information associated with each
processor. Thresholds are provided to control the
behavior of the following objects from the
cimrMsuTrafficTable table.
-- cimrMsuTrafficRateState
-- cimrMsuTrafficRate
-- cimrMsuTrafficSize
-- cimrMsuProcDurWarning
-- cimrMsuProcDurOverloaded
Any changes to these thresholds will cause a reset of
measurements which is indicated by cimrMsuProcReset
and cimrMsuProcResetTimestamp objects.
Notifications thresholds.
In order to generate notifications when MSU rate switch
states the customer must define traffic levels using the
following objects. When the global objects contain
non-zero values they will act as defaults to all entries
in table.
global:
- cimrMsuRateAcceptableThreshold
- cimrMsuRateWarningThreshold
- cimrMsuRateOverloadedThreshold
Per processor:
- cimrMsuProcAcceptableThreshold
- cimrMsuProcWarningThreshold
- cimrMsuProcOverloadedThreshold
The global thresholds only apply when all of the threshold
objects at instance level are set to zero. Set operations
against thresholds must be performed as single operation.
Calculation of cimrMsuTrafficRateState object is performed in
the following manner to only report significant changes
in traffic. In order to switch to a higher state the
traffic rate must equal or exceed the next higher
threshold. For example when current state is acceptable
the traffic must equal or exceed value specified by
warning-threshold to obtain warning state. In order to
switch to a lower state the traffic rate must be less than
the next lower threshold. For example when current state
is overloaded the traffic must drop below warning-threshold
to obtain warning state.
Example:
Acceptable-Threshold = 2000
Warning-Threshold = 2500
Overloaded-Threshold = 3000
Sample Rate Old State New State
------ ---- ---------- ----------
1 2000 Acceptable Acceptable
2 2500 Acceptable Warning
3 2200 Warning Warning
4 2000 Warning Acceptable
5 3000 Acceptable Overloaded
5 1000 Overloaded Acceptable"
::= { cimrTables 1 }
cimrMsuProcEntry OBJECT-TYPE
SYNTAX CimrMsuProcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a processor and is updated
at end of interval specified by the
cimrMsuRateSampleInterval object."
INDEX { cimrMsuProcIndex }
::= { cimrMsuProcTable 1 }
CimrMsuProcEntry ::= SEQUENCE {
cimrMsuProcIndex Unsigned32,
cimrMsuProcPhysicalIndex EntPhysicalIndexOrZero,
cimrMsuProcAcceptableThreshold CimrMsuThreshold,
cimrMsuProcWarningThreshold CimrMsuThreshold,
cimrMsuProcOverloadedThreshold CimrMsuThreshold,
cimrMsuProcReset TruthValue,
cimrMsuProcResetTimestamp TimeStamp,
cimrMsuProcSlotNumber Integer32,
cimrMsuProcBayNumber Integer32
}
cimrMsuProcIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely represents a processor. This
index is assigned arbitrarily by the engine and is
not saved over reboots."
::= { cimrMsuProcEntry 1 }
cimrMsuProcPhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex of the physical entity for which
the MSU measurements in this entry are maintained.
The exact type of this entity is described by its
entPhysicalVendorType value."
::= { cimrMsuProcEntry 2 }
cimrMsuProcAcceptableThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify a level of traffic below
which the traffic is considered to be acceptable. All
changes to this threshold will take effect at the end of the
current interval. The value for this object must be less
than the values specified by cimrMsuProcWarningThreshold
and cimrMsuProcOverloadedThreshold objects."
DEFVAL { 0 }
::= { cimrMsuProcEntry 3 }
cimrMsuProcWarningThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify a level of traffic that
indicates a rate that is above acceptable level, but is
below level that impacts routing of MSUs. All changes to
this threshold will take effect at the end of the current
interval. The value for this object must be greater than
the values specified by cimrMsuProcAcceptableThreshold and
less than cimrMsuProcOverloadedThreshold objects."
DEFVAL { 0 }
::= { cimrMsuProcEntry 4 }
cimrMsuProcOverloadedThreshold OBJECT-TYPE
SYNTAX CimrMsuThreshold
UNITS "MSUs per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify a level of traffic that
indicates a rate that may impact routing of MSUs. All
changes to this threshold will take effect at the end
of the current interval. The value for this object must
be greater than the value specified for
cimrMsuProcAcceptableThreshold and
cimrMsuProcWarningThreshold objects."
DEFVAL { 0 }
::= { cimrMsuProcEntry 5 }
cimrMsuProcReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object object always returns the 'false' value.
Setting the object to 'true' resets the following
objects.
cimrMsuProcDurWarning
cimrMsuProcDurOverloaded
cimrMsuTrafficMaxRate
cimrMsuTrafficMaxRateTimestamp
cimrMsuDist000to009Seconds
cimrMsuDist010to019Seconds
cimrMsuDist020to029Seconds
cimrMsuDist030to039Seconds
cimrMsuDist040to049Seconds
cimrMsuDist050to059Seconds
cimrMsuDist060to069Seconds
cimrMsuDist070to079Seconds
cimrMsuDist080to089Seconds
cimrMsuDist090orAbove
In addition, the cimrMsuRateResetTimestamp is set to the
current sysUpTime."
::= { cimrMsuProcEntry 6 }
cimrMsuProcResetTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the measurements
were reset by setting the cimrMsuProcReset object or
by changing any of the following objects.
cimrMsuRateSampleInterval
cimrMsuRateAcceptableThreshold,
cimrMsuRateWarningThreshold,
cimrMsuRateOverloadedThreshold
cimrMsuProcAcceptableThreshold
cimrMsuProcWarningThreshold
cimrMsuProcOverloadedThreshold
This object will default to the time when instance
was created."
::= { cimrMsuProcEntry 7 }
cimrMsuProcSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of slot contain processor and will be
set to zero when platform does not support
processsors in multiple slots."
::= { cimrMsuProcEntry 8 }
cimrMsuProcBayNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bay contain processor and will be
set to zero when platform does not support
processsors in multiple bays."
::= { cimrMsuProcEntry 9 }
-- *************************************************************
-- * *
-- * Current Traffic MSU Rates *
-- * *
-- *************************************************************
cimrMsuTrafficTable OBJECT-TYPE
SYNTAX SEQUENCE OF CimrMsuTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on the traffic in MUS
for each processor in both directions. Any MSU in which
a processor is involved will be counted. Here are some
examples of how MSUs would be counted.
Traditional SS7 Links:
MSU is received on Line card 1 that supports SS7 link and
MSU is routed directly to line card 2 that supports output
link. Line card 1 processor information will be updated to
indicate it received MSU and line card 2 processor
information will be updated to indicate it sent MSU.
IP/SCTP based SS7 Links:
IP based SS7 Links can be terminated on linecard or owned
by the main processor. When SS7 link is terminated on main
processor only the main processor information will be
updated. The line card processor that owns the IP interface
will be involved but will not be included in measurements.
When the SS7 link is terminated on line card its processor
information will be updated.
It is important to note that packets exchanged for SCTP
associations are different from SS7 MSUs. More than one
SS7 MSU can be transmitted in a single IP packet. Also,
the SCTP association exchanges control packets that are
not counted as SS7 MSUs."
::= { cimrTables 2 }
cimrMsuTrafficEntry OBJECT-TYPE
SYNTAX CimrMsuTrafficEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a processor traffic in a particular
direction and is updated at end of interval specified by
the cimrMsuRateSampleInterval object."
INDEX {
cimrMsuProcIndex,
cimrMsuTrafficDirection
}
::= { cimrMsuTrafficTable 1 }
CimrMsuTrafficEntry ::= SEQUENCE {
cimrMsuTrafficDirection CirbhMsuTrafficDirection,
cimrMsuTrafficRateState CimrMsuRateState,
cimrMsuTrafficRate Gauge32,
cimrMsuTrafficSize Gauge32,
cimrMsuTrafficDurWarning CirbhMsuCurrentCount,
cimrMsuTrafficDurOverloaded CirbhMsuCurrentCount,
cimrMsuTrafficMaxRate Gauge32,
cimrMsuTrafficMaxTimestamp TimeStamp,
cimrMsuTrafficMSUs Counter32
}
cimrMsuTrafficDirection OBJECT-TYPE
SYNTAX CirbhMsuTrafficDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction of traffic on a processor."
::= { cimrMsuTrafficEntry 1 }
cimrMsuTrafficRateState OBJECT-TYPE
SYNTAX CimrMsuRateState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of traffic load for a particular
direction and is calculated using the following objects.
- cimrMsuTrafficRcvdRate
- cimrMsuRateAcceptableThreshold
- cimrMsuRateWarningThreshold
- cimrMsuRateOverloadedThreshold
- cimrMsuTrafficAcceptableThreshold
- cimrMsuTrafficWarningThreshold
- cimrMsuTrafficOverloadedThreshold"
::= { cimrMsuTrafficEntry 2 }
cimrMsuTrafficRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "MSUs per seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rate of MSUs over the interval specified by the
cimrMsuRateSampleInterval object."
::= { cimrMsuTrafficEntry 3 }
cimrMsuTrafficSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "Average bytes per MSU"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average size of MSU over the interval
specified by the cimrMsuRateSampleInterval object."
::= { cimrMsuTrafficEntry 4 }
cimrMsuTrafficDurWarning OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds the cimrMsuTrafficRateState was in
the 'warning' state."
::= { cimrMsuTrafficEntry 5 }
cimrMsuTrafficDurOverloaded OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds the cimrMsuTrafficRateState was in
the 'overloaded' state."
::= { cimrMsuTrafficEntry 6 }
cimrMsuTrafficMaxRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "MSUs per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum value for the cimrMsuTrafficRate object since
Setting this object to zero will clear the
cimrMsuTrafficMaxTimestamp until the need next
interval information is collected."
::= { cimrMsuTrafficEntry 7 }
cimrMsuTrafficMaxTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time and date when cimrMsuTrafficMaxRate was
last set or zero when object was cleared."
::= { cimrMsuTrafficEntry 8 }
cimrMsuTrafficMSUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSU handled by this processor."
::= { cimrMsuTrafficEntry 9 }
-- *************************************************************
-- * *
-- * Distribution of MSU Rates *
-- * *
-- *************************************************************
cimrMsuDistTable OBJECT-TYPE
SYNTAX SEQUENCE OF CimrMsuDistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides distribution of MSU rates per
processor in both the transmit and receive directions.
The MSU rates are converted into percentages by the
current overloaded-threshold by the following formula:
(MSU-Rate * 100)/overloaded-threshold
Any value over 100 is placed in 90 to 100 range.
Any changes to the following thresholds or setting
cimrMsuProcReset object to 'true' will cause
information in table to be reset.
global:
- cimrMsuRateAcceptableThreshold
- cimrMsuRateWarningThreshold
- cimrMsuRateOverloadedThreshold
Per processor:
- cimrMsuProcAcceptableThreshold
- cimrMsuProcWarningThreshold
- cimrMsuProcOverloadedThreshold
In order for this table to contain data either the
cimrMsuRateOverloadedThreshold or
cimrMsuProcOverloadedThreshold must be set to non-zero
value. If both objects are zero then data is not
collected for this table."
::= { cimrTables 3 }
cimrMsuDistEntry OBJECT-TYPE
SYNTAX CimrMsuDistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a processor and is updated
at end of interval specified by the
cimrMsuRateSampleInterval object."
INDEX {
cimrMsuProcIndex,
cimrMsuTrafficDirection
}
::= { cimrMsuDistTable 1 }
CimrMsuDistEntry ::= SEQUENCE {
cimrMsuDist000to009Seconds CirbhMsuCurrentCount,
cimrMsuDist010to019Seconds CirbhMsuCurrentCount,
cimrMsuDist020to029Seconds CirbhMsuCurrentCount,
cimrMsuDist030to039Seconds CirbhMsuCurrentCount,
cimrMsuDist040to049Seconds CirbhMsuCurrentCount,
cimrMsuDist050to059Seconds CirbhMsuCurrentCount,
cimrMsuDist060to069Seconds CirbhMsuCurrentCount,
cimrMsuDist070to079Seconds CirbhMsuCurrentCount,
cimrMsuDist080to089Seconds CirbhMsuCurrentCount,
cimrMsuDist090orAbove CirbhMsuCurrentCount
}
cimrMsuDist000to009Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 0 to 9 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 1 }
cimrMsuDist010to019Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 10 to 19 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 2 }
cimrMsuDist020to029Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 20 to 29 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 3 }
cimrMsuDist030to039Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 30 to 39 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 4 }
cimrMsuDist040to049Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 40 to 49 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 5 }
cimrMsuDist050to059Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 50 to 59 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 6 }
cimrMsuDist060to069Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 60 to 69 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 7 }
cimrMsuDist070to079Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 70 to 79 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 8 }
cimrMsuDist080to089Seconds OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was from 80 to 89 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 9 }
cimrMsuDist090orAbove OBJECT-TYPE
SYNTAX CirbhMsuCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of seconds during which the MSU rate
for this processor was above 90 percent of the
current overloaded-threshold value."
::= { cimrMsuDistEntry 10 }
-- *************************************************************
-- * *
-- * Notifications *
-- * *
-- *************************************************************
ciscoItpMsuRateState NOTIFICATION-TYPE
OBJECTS {
cimrMsuTrafficRateState,
cimrMsuTrafficRate,
cimrMsuTrafficSize
}
STATUS current
DESCRIPTION
"This notification is generated once for the interval
specified by the cimrMsuRateNotifyInterval object when the
cimrMsuTrafficRateState object has the following state
transitions.
'acceptable' -> 'warning'
'acceptable' -> 'overloaded'
'warning' -> 'overloaded'
At the end of the interval specified by the
cimrMsuRateNotifyInterval object another notification
will be generated if the current state is
different from state sent in last notification even if
the state transition is not one of the above transitions.
When the cimrMsuRateNotifyInterval is set to zero all
state changes will generate notifications."
::= { ciscoItpMsuRatesMIBNotifs 1 }
-- *************************************************************
-- * *
-- * Conformance Information *
-- * *
-- *************************************************************
ciscoItpMsuRatesMIBCompliances OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIBConform 1 }
ciscoItpMsuRatesMIBGroups OBJECT IDENTIFIER
::= { ciscoItpMsuRatesMIBConform 2 }
-- *****************************************************************
-- Compliance Statements
-- *****************************************************************
ciscoItpMsuRatesMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-ITP-MSU-RATES-MIB.my MIB"
MODULE -- this module
MANDATORY-GROUPS {
ciscoItpMsuRatesScalarsGroup,
ciscoItpMsuRatesObjects,
ciscoItpMsuDistObjects,
ciscoItpMsuRatesNotifyGroup
}
::= { ciscoItpMsuRatesMIBCompliances 1 }
ciscoItpMsuRatesMIBCompliancesRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-ITP-MSU-RATES-MIB.my MIB"
MODULE -- this module
MANDATORY-GROUPS {
ciscoItpMsuRatesScalarsGroup,
ciscoItpMsuRatesObjects,
ciscoItpMsuDistObjects,
ciscoItpMsuRatesNotifyGroup,
ciscoItpMsuRatesObjectsRev1
}
::= { ciscoItpMsuRatesMIBCompliances 2 }
-- ****************************************************************
-- Units of Conformance
-- ****************************************************************
ciscoItpMsuRatesScalarsGroup OBJECT-GROUP
OBJECTS {
cimrMsuRateSampleInterval,
cimrMsuRateNotifyInterval,
cimrMsuRateNotifyEnable,
cimrMsuRateAcceptableThreshold,
cimrMsuRateWarningThreshold,
cimrMsuRateOverloadedThreshold
}
STATUS current
DESCRIPTION
"Objects used control collection MSU rates."
::= { ciscoItpMsuRatesMIBGroups 1 }
ciscoItpMsuRatesObjects OBJECT-GROUP
OBJECTS {
cimrMsuProcPhysicalIndex,
cimrMsuProcAcceptableThreshold,
cimrMsuProcWarningThreshold,
cimrMsuProcOverloadedThreshold,
cimrMsuProcReset,
cimrMsuProcResetTimestamp,
cimrMsuProcSlotNumber,
cimrMsuProcBayNumber,
cimrMsuTrafficRateState,
cimrMsuTrafficRate,
cimrMsuTrafficSize,
cimrMsuTrafficDurWarning,
cimrMsuTrafficDurOverloaded,
cimrMsuTrafficMaxRate,
cimrMsuTrafficMaxTimestamp
}
STATUS current
DESCRIPTION
"ITP MSU rates object group."
::= { ciscoItpMsuRatesMIBGroups 2 }
ciscoItpMsuDistObjects OBJECT-GROUP
OBJECTS {
cimrMsuDist000to009Seconds,
cimrMsuDist010to019Seconds,
cimrMsuDist020to029Seconds,
cimrMsuDist030to039Seconds,
cimrMsuDist040to049Seconds,
cimrMsuDist050to059Seconds,
cimrMsuDist060to069Seconds,
cimrMsuDist070to079Seconds,
cimrMsuDist080to089Seconds,
cimrMsuDist090orAbove
}
STATUS current
DESCRIPTION
"ITP MSU distribution object group."
::= { ciscoItpMsuRatesMIBGroups 3 }
ciscoItpMsuRatesNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoItpMsuRateState }
STATUS current
DESCRIPTION
"ITP MSU state notification group."
::= { ciscoItpMsuRatesMIBGroups 4 }
ciscoItpMsuRatesObjectsRev1 OBJECT-GROUP
OBJECTS { cimrMsuTrafficMSUs }
STATUS current
DESCRIPTION
"ITP total MSU handled by processor."
::= { ciscoItpMsuRatesMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink