MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IP-NW-DISCOVERY-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

604 lines
22 KiB
Plaintext
Raw Blame History

-- ********************************************************************
-- CISCO-IP-NW-DISCOVERY-MIB.my
--
-- June 2005, Magesh Iyengar
--
-- Copyright (c) 2005-2006 by cisco Systems, Inc.
--
-- All rights reserved.
--
-- *******************************************************************
CISCO-IP-NW-DISCOVERY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
TestAndIncr
FROM SNMPv2-TC
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
FcNameId
FROM CISCO-ST-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoIpNetworkDiscoveryMIB MODULE-IDENTITY
LAST-UPDATED "200610030000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"MIB to provide the information about the disjoint
IP networks connected to the various gigabit ethernet
interfaces in the 'Fabric' and objects to discover
the same.
It is possible that multiple disjoint IP networks
may terminate on a single fibre channel switch
in a Fabric.
This MIB provides ability to initiate, configure and
show discovery results of the IP Networks in
the fabric.
GLOSSARY:
Fabric - The set of physically connected fibre channel
switches.
WWN - World Wide Name."
REVISION "200610030000Z"
DESCRIPTION
"Updated with correct ciscoMgmt number for MODULE-IDENTITY."
REVISION "200508090000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 434 }
cIpNetworkDiscoveryMIBNotifs OBJECT IDENTIFIER
::= { ciscoIpNetworkDiscoveryMIB 0 }
cIpNetworkDiscoveryMIBObjs OBJECT IDENTIFIER
::= { ciscoIpNetworkDiscoveryMIB 1 }
cIpNetworkDiscoveryConform OBJECT IDENTIFIER
::= { ciscoIpNetworkDiscoveryMIB 2 }
cIpNetworkDiscoveryConfig OBJECT IDENTIFIER
::= { cIpNetworkDiscoveryMIBObjs 1 }
cIpNetworkDiscoveryInfo OBJECT IDENTIFIER
::= { cIpNetworkDiscoveryMIBObjs 2 }
-- IP Network Automatic Discovery Information
cIpNetworkAutomaticDiscovery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the automatic discovery
to find the reachability on the IP networks is enabled
or not in the system.
If automatic discovery is not enabled in the system
then the discovery operation can be initiated only
manually by the user.
The value of this object set to 'true' indicates the
automatic discovery for IP network is enabled in
the system.
The value of this object set to 'false' indicates the
automatic discovery for IP network is not enabled in
the system."
DEFVAL { false }
::= { cIpNetworkDiscoveryConfig 1 }
cIpNetworkDiscoveryDelay OBJECT-TYPE
SYNTAX Integer32 (0..5184000 )
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time duration between the
state change of an IP interface and the start of
discovery operation of interface, if Automatic
discovery is configured as 'true' in the
cIpNetworkAutomaticDiscovery object. The value '0'
indicates no delay."
DEFVAL { 10 }
::= { cIpNetworkDiscoveryConfig 2 }
-- Global Configuration for the IP Network discovery type
cIpNetworkDiscoveryTypeSpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to facilitate modification of
cIpNetworkDiscoverType, cIpNetworkDiscoverPort
objects by multiple managers.
The procedure for modifying the above two objects
(only if the 'cIpNetworkDiscoveryType' is set to
tcp/udp) are as follows :
1. Determine the new values for
cIpNetworkDiscoverType, cIpNetworkDiscoverPort
objects.
2. Retrieve the value of
'cIpNetworkDiscoveryTypeSpinLock' object.
3. Set the value of 'cIpNetworkDiscoveryTypeSpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkDiscoveryType' to the new
value. If the set fails for the
'cIpNetworkDiscoveryTypeSpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoveryTypeSpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkDiscoveryPort' object to the
new value.
Note that if it's possible to include
'cIpNetworkDiscoveryPort' object in the
(Set Request) PDU of an earlier step, then step 4
can be eliminated."
::= { cIpNetworkDiscoveryConfig 3 }
cIpNetworkDiscoveryType OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
tcp(2),
udp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates type of discovery packets to
be sent for carrying out the IP network discovery."
DEFVAL { icmp }
::= { cIpNetworkDiscoveryConfig 4 }
cIpNetworkDiscoveryPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates TCP/UDP port used for of IP network
discovery operation, if the cIpNetworkDiscoveryType
object is set to 'tcp' or 'udp'."
::= { cIpNetworkDiscoveryConfig 5 }
-- Objects for Performing the IP Network Discovery
cIpNetworkDiscoverySpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated."
::= { cIpNetworkDiscoveryConfig 6 }
cIpNetworkGigEIfIndexToDiscover OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 'ifIndex' of the specified
gigabit ethernet interface for which the IP network
discovery needs to be done incrementally.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object
to 'interfaceSpecific'."
::= { cIpNetworkDiscoveryConfig 7 }
cIpNetworkInetAddrTypeToDiscover OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 'InetAddressType' of the
address of the Gigabit ethernet port on which to
perform the discovery.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'."
DEFVAL { ipv4 }
::= { cIpNetworkDiscoveryConfig 8 }
cIpNetworkGigEInetAddrToDiscover OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 'InetAddress' of the specified
gigabit ethernet interface specified in the
'cIpNetworkGigEIfIndexToDiscover' for which the IP
network discovery needs to be done incrementally.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'."
::= { cIpNetworkDiscoveryConfig 9 }
cIpNetworkDiscoveryCommand OBJECT-TYPE
SYNTAX INTEGER {
all(1),
noOp(2),
interfaceSpecific(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP network discovery command to be executed.
Command Remarks
all Run IP network discovery for all the
gigabit ethernet interfaces in the
fabric.
noOp no operation will be performed.
interfaceSpecific Run IP network discovery incrementally
for the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover',
'cIpNetworkGigEInetAddrToDiscover' and
'cIpNetworkGigESwitchWWNToDiscover'
objects.
The value of this object when read is always 'noOp'."
DEFVAL { noOp }
::= { cIpNetworkDiscoveryConfig 10 }
cIpNetworkDiscoveryCmdStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
none(2),
inProgress(3),
noGigEInterfaceIndexSpecified(4),
noGigEInetAddrSpecified(5),
noGigESwitchWWNSpecified(6),
invalidGigEInterfaceIndex(7),
invalidGigEInetAddrType(8),
invalidGigEInetAddr(9),
generalFailure(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure."
::= { cIpNetworkDiscoveryConfig 11 }
-- Disjoint IP Networks Discovered
cIpNetworkTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIpNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents the discovered list of all IP networks
connected to the gigabit ethernet interfaces in
the fabric.
The entries in this table are populated by the discovery
process started either by the auto discovery mechanism
or triggered by the user by the setting the
cIpNetworkDiscoveryCommand object to 'all' or
'interfaceSpecific'."
::= { cIpNetworkDiscoveryInfo 1 }
cIpNetworkEntry OBJECT-TYPE
SYNTAX CIpNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents the information about an
IP network connected to the gigabit ethernet interface
in the fabric."
INDEX { cIpNetworkIndex }
::= { cIpNetworkTable 1 }
CIpNetworkEntry ::= SEQUENCE {
cIpNetworkIndex Integer32,
cIpNetworkSwitchWWN FcNameId
}
cIpNetworkIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value, greater than zero which
uniquely identifies the IP Network discovered in
the fabric."
::= { cIpNetworkEntry 1 }
cIpNetworkSwitchWWN OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the WWN of the switch which has
created the corresponding entry in this table."
::= { cIpNetworkEntry 2 }
-- Table for associating gigabit ethernet interfaces
-- to the IP-network.
cIpNetworkInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CIpNetworkInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consisting of entries for all the gigabit
ethernet interfaces, which are connected to the
various IP networks in the Fabric.
The members of the IP networks are dynamically
discovered by the discovery process."
::= { cIpNetworkDiscoveryInfo 2 }
cIpNetworkInterfaceEntry OBJECT-TYPE
SYNTAX CIpNetworkInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the
'cIpNetworkInterfaceTable'.
Each row represents a gigabit ethernet interface in
the fabric and its IP network."
INDEX {
cIpNetworkIndex,
cIpNetworkGigEPortSwitchWWN,
cIpNetworkGigEPortIfIndex,
cIpNetworkGigEPortInetAddrType,
cIpNetworkGigEPortInetAddr
}
::= { cIpNetworkInterfaceTable 1 }
CIpNetworkInterfaceEntry ::= SEQUENCE {
cIpNetworkGigEPortSwitchWWN FcNameId,
cIpNetworkGigEPortIfIndex InterfaceIndex,
cIpNetworkGigEPortInetAddrType InetAddressType,
cIpNetworkGigEPortInetAddr InetAddress
}
cIpNetworkGigEPortSwitchWWN OBJECT-TYPE
SYNTAX FcNameId (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the World Wide Name (WWN) of
the associated switch in the fabric, of the gigabit
ethernet interface mentioned in corresponding instance
of 'cIpNetworkGigEPortIfIndex' object."
::= { cIpNetworkInterfaceEntry 1 }
cIpNetworkGigEPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the 'ifIndex' of the gigabit
ethernet interface in a switch in the fabric.
The World Wide Name (WWN) of the switch is mentioned
in the corresponding instance of
'cIpNetworkGigEPortSwitchWWN'.
The gigabit ethernet interface is connected to the IP
network represented by the value of the
corresponding instance of 'cIpNetworkIndex'."
::= { cIpNetworkInterfaceEntry 2 }
cIpNetworkGigEPortInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the InetAddressType of
the gigabit ethernet interface."
::= { cIpNetworkInterfaceEntry 3 }
cIpNetworkGigEPortInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4 | 16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the InetAddress of the gigabit
ethernet interface mentioned in the corresponding
instance 'cIpNetworkGigEPortIfIndex' object.
The address is of the type indicated by
'cIpNetworkGigEPortInetAddrType'.
The gigabit ethernet interface is connected to the IP
network represented by the value of the
corresponding instance of 'cIpNetworkIndex'."
::= { cIpNetworkInterfaceEntry 4 }
-- Compliance Information
cIpNetworkDiscoverCompliance OBJECT IDENTIFIER
::= { cIpNetworkDiscoveryConform 1 }
cIpNetworkDiscoveryMIBComp MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-IP-NW-DISCOVERY-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cIpNetworkDiscoveryInfoGroup,
cIpNetworkDiscoveryCfgGroup
}
::= { cIpNetworkDiscoverCompliance 1 }
-- Units of Conformance
cIpNetworkDiscoveryMIBGroups OBJECT IDENTIFIER
::= { cIpNetworkDiscoveryConform 2 }
cIpNetworkDiscoveryInfoGroup OBJECT-GROUP
OBJECTS {
cIpNetworkSwitchWWN,
cIpNetworkGigEPortInetAddr
}
STATUS current
DESCRIPTION
"A Collection of objects for the IP networks
discovered in the fabric and its
associated gigabit ethernet interfaces details."
::= { cIpNetworkDiscoveryMIBGroups 1 }
cIpNetworkDiscoveryCfgGroup OBJECT-GROUP
OBJECTS {
cIpNetworkAutomaticDiscovery,
cIpNetworkDiscoveryDelay,
cIpNetworkDiscoveryTypeSpinLock,
cIpNetworkDiscoveryType,
cIpNetworkDiscoveryPort,
cIpNetworkDiscoverySpinLock,
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover,
cIpNetworkDiscoveryCommand,
cIpNetworkDiscoveryCmdStatus
}
STATUS current
DESCRIPTION
"A Collection of objects to be configured, for doing
the IP network discovery."
::= { cIpNetworkDiscoveryMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink