mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
666 lines
24 KiB
Plaintext
666 lines
24 KiB
Plaintext
-- *****************************************************************
|
|
-- MIBS/CISCO-IGMP-FILTER-MIB.my: Cisco IGMP Filter MIB
|
|
|
|
-- Aug. 2001, Dipesh Gorashia, Pauline Shuen
|
|
|
|
-- Copyright (c) 2001, 2002 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-IGMP-FILTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TruthValue,
|
|
TestAndIncr
|
|
FROM SNMPv2-TC
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
ifIndex
|
|
FROM IF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
ciscoIGMPFilterMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200511290000Z"
|
|
ORGANIZATION "Cisco Systems, Inc"
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-ipmulticast@cisco.com"
|
|
DESCRIPTION
|
|
"IGMP Filter configuration MIB. This MIB provides a
|
|
mechanism for users to configure the system to intercept
|
|
IGMP joins for IP Multicast groups identified in this
|
|
MIB and only allow certain ports to join certain
|
|
multicast groups."
|
|
REVISION "200511290000Z"
|
|
DESCRIPTION
|
|
"Deprecated ciscoIgmpFilterGolbalMIBCompliance
|
|
and added ciscoIgmpFilterGlobalMIBComplianceRev1
|
|
to include ciscoIgmpFilterGlobalGroup under
|
|
MANDATORY-GROUPS; Updated the imports such that
|
|
Unsigned32 is imported from SNMPv2-SMI instead
|
|
of CISCO-TC, and other clean up."
|
|
REVISION "200205090000Z"
|
|
DESCRIPTION
|
|
"Corrected typos existing in the MIB."
|
|
REVISION "200111080000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module"
|
|
::= { ciscoMgmt 238 }
|
|
|
|
ciscoIgmpFilterMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoIGMPFilterMIB 1 }
|
|
|
|
cIgmpFilterGeneral OBJECT IDENTIFIER
|
|
::= { ciscoIgmpFilterMIBObjects 1 }
|
|
|
|
cIgmpFilterInfo OBJECT IDENTIFIER
|
|
::= { ciscoIgmpFilterMIBObjects 2 }
|
|
|
|
cIgmpFilterEditor OBJECT IDENTIFIER
|
|
::= { ciscoIgmpFilterMIBObjects 3 }
|
|
|
|
-- IGMP Filter General Group
|
|
cIgmpFilterEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the IGMP filtering
|
|
is enabled on the device. A false(2) value will
|
|
prevent the IGMP filtering action on the device."
|
|
DEFVAL { false }
|
|
::= { cIgmpFilterGeneral 1 }
|
|
|
|
cIgmpFilterMaxProfiles OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "profiles"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of profiles supported by
|
|
this device. A value of zero indicates no limitation on
|
|
the number of profiles."
|
|
::= { cIgmpFilterGeneral 2 }
|
|
|
|
-- IGMP Filter Information Group
|
|
cIgmpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CIgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries that identify lists of
|
|
IP Multicast groups for each profile configured on
|
|
the device.
|
|
|
|
Each entry contains a range of contiguous IP
|
|
Multicast groups associated to a profile index.
|
|
Multiple cIgmpFilterEntry may be associated
|
|
with the same cIgmpFilterProfileIndex.
|
|
|
|
All the cIgmpFilterEntry with the same profile index
|
|
are subjected to the same IGMP filtering action as
|
|
defined in cIgmpFilterProfileAction.
|
|
|
|
Each profile index may be associated with zero or more
|
|
interfaces through cIgmpFilterInterfaceIfIndex
|
|
object in cIgmpFilterInterfaceTable.
|
|
The maximum number of entries is determined by
|
|
cIgmpFilterMaxProfiles."
|
|
::= { cIgmpFilterInfo 1 }
|
|
|
|
cIgmpFilterEntry OBJECT-TYPE
|
|
SYNTAX CIgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the cIgmpFilterTable.
|
|
|
|
The creation, deletion or modification of an entry
|
|
is controlled through the MIB objects defined under
|
|
cIgmpFilterEditor group."
|
|
INDEX {
|
|
cIgmpFilterProfileIndex,
|
|
cIgmpFilterStartAddressType,
|
|
cIgmpFilterStartAddress
|
|
}
|
|
::= { cIgmpFilterTable 1 }
|
|
|
|
CIgmpFilterEntry ::= SEQUENCE {
|
|
cIgmpFilterProfileIndex Unsigned32,
|
|
cIgmpFilterStartAddressType InetAddressType,
|
|
cIgmpFilterStartAddress InetAddress,
|
|
cIgmpFilterEndAddressType InetAddressType,
|
|
cIgmpFilterEndAddress InetAddress,
|
|
cIgmpFilterProfileAction INTEGER
|
|
}
|
|
|
|
cIgmpFilterProfileIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index identifying this entry."
|
|
::= { cIgmpFilterEntry 1 }
|
|
|
|
cIgmpFilterStartAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the type of Internet
|
|
address used to determine the start address
|
|
of IP multicast group for a profile."
|
|
::= { cIgmpFilterEntry 2 }
|
|
|
|
cIgmpFilterStartAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the start of the IP multicast
|
|
group address of a contiguous range which will be
|
|
subjected to filtering operation."
|
|
::= { cIgmpFilterEntry 3 }
|
|
|
|
cIgmpFilterEndAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of Internet
|
|
address used to determine the end address
|
|
of IP multicast group for a profile."
|
|
::= { cIgmpFilterEntry 4 }
|
|
|
|
cIgmpFilterEndAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of the IP multicast
|
|
group address of a contiguous range which will be
|
|
subjected to filtering operation."
|
|
::= { cIgmpFilterEntry 5 }
|
|
|
|
cIgmpFilterProfileAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the action for
|
|
filtering IGMP reports for this profile.
|
|
|
|
If the object is set to deny(2):
|
|
then all IGMP reports associated to IP multicast
|
|
groups included in the profile identified by
|
|
cIgmpFilterInterfaceProfileIndex will be dropped.
|
|
|
|
If the object is set to permit(1):
|
|
then all IGMP reports associated to IP multicast
|
|
groups not included in the profile identified by
|
|
cIgmpFilterInterfaceProfileIndex will be dropped."
|
|
::= { cIgmpFilterEntry 6 }
|
|
|
|
-- The per interface IGMP filtering configuration table
|
|
cIgmpFilterInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CIgmpFilterInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of interfaces that can
|
|
support IGMP filter feature."
|
|
::= { cIgmpFilterInfo 2 }
|
|
|
|
cIgmpFilterInterfaceEntry OBJECT-TYPE
|
|
SYNTAX CIgmpFilterInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the configuration for associating
|
|
the IGMP filter profile index with the interface.
|
|
|
|
An entry is created for each of the IGMP filter capable
|
|
interface on the system.
|
|
|
|
The entry is removed on removal of corresponding
|
|
interface from system."
|
|
INDEX { ifIndex }
|
|
::= { cIgmpFilterInterfaceTable 1 }
|
|
|
|
CIgmpFilterInterfaceEntry ::= SEQUENCE {
|
|
cIgmpFilterInterfaceProfileIndex Unsigned32
|
|
}
|
|
|
|
cIgmpFilterInterfaceProfileIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which IGMP filter profile applies to this
|
|
interface. If the value of this MIB object matches the
|
|
value of cIgmpFilterProfileIndex in cIgmpFilterTable,
|
|
the corresponding profile configuration will apply to
|
|
this interface.
|
|
|
|
Agent returns inconsistentValue if this profile
|
|
does not exist in cIgmpFilterTable.
|
|
A value of zero indicates no profile is associated
|
|
with corresponding interface.
|
|
|
|
The filtering action on each interface is also
|
|
defined by the associated profile."
|
|
DEFVAL { 0 }
|
|
::= { cIgmpFilterInterfaceEntry 1 }
|
|
|
|
-- The IGMP Filter Editor Group
|
|
|
|
-- Group of objects acting as buffer to add/delete/modify
|
|
-- entries in the cIgmpFilterTable.
|
|
-- Objects in the group are set to appropriate values and state of
|
|
-- cIgmpFilterEditOperation is changed to add/delete or modify
|
|
-- to apply the required changes to the cIgmpFilterTable.
|
|
cIgmpFilterEditSpinLock OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to facilitate modification of
|
|
IGMP Filter Editor Group in the CISCO-IGMP-FILTER-MIB
|
|
module by multiple managers. In particular, it is
|
|
useful when modifying the value of the cIgmpFilterEditor
|
|
object.
|
|
|
|
The procedure for modifying the cIgmpFilterEditor
|
|
object is as follows:
|
|
|
|
1. Retrieve the value of cIgmpFilterEditSpinLock and
|
|
of object within cIgmpFilterEditor group.
|
|
|
|
2. Generate new values for 'writeable' objects
|
|
in the cIgmpFilterEditor group except for
|
|
cIgmpFilterEditSpinLock object.
|
|
|
|
3. Set the value of cIgmpFilterEditSpinLock to the
|
|
retrieved value, and the value of objects in
|
|
cIgmpFilterEditor to the new value. If the set
|
|
fails for the cIgmpFilterEditSpinLock object,
|
|
go back to step 1.
|
|
|
|
The cIgmpFilterApplyStatus and cIgmpFilterEditSpinLock
|
|
should be read together by NMS to make sure that the
|
|
result is associated with its configuration request.
|
|
|
|
To add/delete or modify a profile ( through cIgmpFilterEditor
|
|
objects ) following procedure may be followed as an example.:
|
|
|
|
1. GET(cIgmpFilterEditSpinLock.0) and save in sValue.
|
|
2. SET(cIgmpFilterEditSpinLock.0 = sValue,
|
|
cIgmpFilterEditProfileIndex.0 = validProfileNumber,
|
|
cIgmpFilterEditStartAddress.0 = validStartAddress,
|
|
cIgmpFilterEditEndAddress.0 = validEndAddress,
|
|
cIgmpFilterEditOperation.0 = validOperation)
|
|
3. If the SET in step 2 is not successful go back
|
|
to step 1.
|
|
4. If the SET in step 2 is successful, user should
|
|
GET(cIgmpFilterEditSpinLock.0) and
|
|
GET(cIgmpFilterApplyStatus.0) simultaneously.
|
|
|
|
5. The cIgmpFilterApplyStatus.0 reflects the outcome of
|
|
step 2 only if
|
|
cIgmpFilterEditSpinLock.0 = sValue + 1 or
|
|
cIgmpFilterEditSpinLock.0 = 0 if sValue reaches
|
|
value at which cIgmpFilterEditSpinLock wraps
|
|
around."
|
|
::= { cIgmpFilterEditor 1 }
|
|
|
|
cIgmpFilterEditProfileIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object
|
|
cIgmpFilterProfileIndex in cIgmpFilterTable.
|
|
|
|
Maximum value this object can be set to is
|
|
determined by cIgmpFilterMaxProfiles object."
|
|
::= { cIgmpFilterEditor 2 }
|
|
|
|
cIgmpFilterEditStartAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object
|
|
cIgmpFilterStartAddressType in cIgmpFilterTable.
|
|
|
|
This object describes the type of Internet
|
|
address used to determine the start address
|
|
of IP multicast group for a profile."
|
|
::= { cIgmpFilterEditor 3 }
|
|
|
|
cIgmpFilterEditStartAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object
|
|
cIgmpFilterStartAddress in cIgmpFilterTable
|
|
to establish start address of filtering
|
|
range for a profile."
|
|
::= { cIgmpFilterEditor 4 }
|
|
|
|
cIgmpFilterEditEndAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object
|
|
cIgmpFilterEndAddressType in cIgmpFilterTable.
|
|
|
|
This object describes the type of Internet
|
|
address used to determine the start address
|
|
of IP multicast group for a profile."
|
|
::= { cIgmpFilterEditor 5 }
|
|
|
|
cIgmpFilterEditEndAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object
|
|
cIgmpFilterEndAddress in cIgmpFilterTable
|
|
to establish end address of filtering
|
|
range for a profile."
|
|
::= { cIgmpFilterEditor 6 }
|
|
|
|
cIgmpFilterEditProfileAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Buffer object to edit corresponding object in
|
|
cIgmpFilterTable to determine filtering action
|
|
of each profile."
|
|
DEFVAL { deny }
|
|
::= { cIgmpFilterEditor 7 }
|
|
|
|
cIgmpFilterEditOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
add(2),
|
|
delete(3),
|
|
modify(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The function of this object is to allow user to
|
|
apply the changes in cIgmpFilterEditor objects to
|
|
cIgmpFilterTable.
|
|
|
|
This object always has the value 'none' when read.
|
|
When written each value causes the appropriate action:
|
|
|
|
'add' - tries to insert the information contained
|
|
in cIgmpFilterEditor objects into cIgmpFilterTable.
|
|
If the entry already exists in the table the 'add'
|
|
fails.
|
|
|
|
'delete' - tries to delete corresponding entry from
|
|
cIgmpFilterTable. If a user completely deletes a profile
|
|
that has corresponding entries in the
|
|
cIgmpFilterInterfaceTable, then all the interfaces mapped
|
|
to corresponding profile will be cleared and set to zero.
|
|
|
|
'modify' - Mode of operation used to edit an entry in
|
|
cIgmpFilterTable. If the corresponding entry does not
|
|
exist, modify operation fails. This mode allows user to
|
|
extend/truncate a contiguous filtered range, type of
|
|
Internet addressing and filtering action for a profile.
|
|
|
|
'none' - no operation is performed."
|
|
::= { cIgmpFilterEditor 8 }
|
|
|
|
cIgmpFilterApplyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
someOtherError(1),
|
|
succeeded(2),
|
|
inconsistentEdit(3),
|
|
entryPresentError(4),
|
|
entryNotPresentError(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of an 'add', 'delete' or 'modify'
|
|
operation. If no apply is currently active, the status
|
|
represented is that of the most recently completed 'add',
|
|
'delete' or 'modify' operation.
|
|
|
|
The value of this objects indicates succeeded(2) state
|
|
initially when no 'add', 'delete', 'modify' operation
|
|
has been carried out.
|
|
|
|
The possible values are:
|
|
someOtherError - the 'add', 'delete' or 'modify' failed
|
|
due to undefined error(s) in apply operation.
|
|
(e.g., insufficient memory).
|
|
|
|
succeeded - the 'add', 'delete' or 'modify' operation
|
|
was successful. (This value is also used when no
|
|
apply has been invoked since the last time the local
|
|
system restarted.)
|
|
|
|
inconsistentEdit - the 'add', 'delete' or 'modify' failed
|
|
due to inconsistency of the data.
|
|
|
|
entryPresentError - the 'add' operation failed as the
|
|
corresponding entry already exists in cIgmpFilterTable.
|
|
|
|
entryNotPresentError - the 'modify' operation failed
|
|
as no corresponding entry exists in cIgmpFilterTable."
|
|
::= { cIgmpFilterEditor 9 }
|
|
|
|
ciscoIgmpFilterMIBConformance OBJECT IDENTIFIER
|
|
::= { ciscoIGMPFilterMIB 2 }
|
|
|
|
ciscoIgmpFilterMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoIgmpFilterMIBConformance 1 }
|
|
|
|
ciscoIgmpFilterMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoIgmpFilterMIBConformance 2 }
|
|
|
|
-- Compliance
|
|
ciscoIgmpFilterGolbalMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities providing
|
|
global control of action and implementing IGMP
|
|
Filter MIB.
|
|
|
|
OBJECT cIgmpFilterEditStartAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditStartAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditEndAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditEndAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterStartAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterStartAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEndAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
|
|
OBJECT cIgmpFilterEndAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoIgmpFilterInfoGroup,
|
|
ciscoIgmpFilterEditorGroup
|
|
}
|
|
::= { ciscoIgmpFilterMIBCompliances 1 }
|
|
|
|
ciscoIgmpFilterGlobalMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities providing
|
|
global control of action and implementing IGMP
|
|
Filter MIB.
|
|
|
|
OBJECT cIgmpFilterEditStartAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditStartAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditEndAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEditEndAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterStartAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterStartAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
OBJECT cIgmpFilterEndAddressType
|
|
SYNTAX InetAddressType { ipv4(1) }
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses.
|
|
|
|
|
|
OBJECT cIgmpFilterEndAddress
|
|
SYNTAX InetAddress (SIZE(4))
|
|
DESCRIPTION
|
|
An implementation is only required to support IPv4
|
|
addresses."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoIgmpFilterGlobalGroup,
|
|
ciscoIgmpFilterInfoGroup,
|
|
ciscoIgmpFilterEditorGroup
|
|
}
|
|
::= { ciscoIgmpFilterMIBCompliances 2 }
|
|
|
|
-- Units of Conformance
|
|
ciscoIgmpFilterGlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cIgmpFilterEnable,
|
|
cIgmpFilterMaxProfiles
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the configuration of
|
|
IGMP filter for the system."
|
|
::= { ciscoIgmpFilterMIBGroups 1 }
|
|
|
|
ciscoIgmpFilterInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cIgmpFilterEndAddressType,
|
|
cIgmpFilterEndAddress,
|
|
cIgmpFilterProfileAction,
|
|
cIgmpFilterInterfaceProfileIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the configuration of
|
|
IGMP filter for the system."
|
|
::= { ciscoIgmpFilterMIBGroups 2 }
|
|
|
|
ciscoIgmpFilterEditorGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cIgmpFilterEditSpinLock,
|
|
cIgmpFilterEditProfileIndex,
|
|
cIgmpFilterEditStartAddressType,
|
|
cIgmpFilterEditStartAddress,
|
|
cIgmpFilterEditEndAddressType,
|
|
cIgmpFilterEditEndAddress,
|
|
cIgmpFilterEditProfileAction,
|
|
cIgmpFilterEditOperation,
|
|
cIgmpFilterApplyStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects acting as a buffer
|
|
to add/delete/modify the entries in
|
|
read-only table cIgmpFilterTable."
|
|
::= { ciscoIgmpFilterMIBGroups 3 }
|
|
|
|
END
|