mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
1030 lines
42 KiB
Plaintext
1030 lines
42 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-ICSUDSU-MIB.my: Integrated CSU/DSU MIB file
|
|
--
|
|
-- March 1996, David Williams
|
|
--
|
|
-- Copyright (c) 1996 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-ICSUDSU-MIB
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Counter32,
|
|
Integer32,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
TruthValue,
|
|
TimeStamp
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
dsx1ConfigEntry
|
|
FROM RFC1406-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoICsuDsuMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9601210000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"Integrated CSU/DSU MIB module. For T1 and Switched 56 kbps
|
|
interfaces."
|
|
::= { ciscoMgmt 44 }
|
|
|
|
ciscoICsuDsuObjects OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 1 }
|
|
|
|
ciscoICsuDsuGeneral OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 1 }
|
|
|
|
ciscoICsuDsuT1 OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 2 }
|
|
|
|
ciscoICsuDsuSw56k OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 3 }
|
|
|
|
|
|
--****************************************************************************
|
|
-- The CSU/DSU Static Configuration Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuStaticConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuStaticConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CSU/DSU Static Configuration Table. Contains items
|
|
that are statically configured and can not be changed by end
|
|
user without physically changing the CSU/DSU."
|
|
::= { ciscoICsuDsuGeneral 1 }
|
|
|
|
ciscoICsuDsuStaticConfigEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuStaticConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the static configuration table for each
|
|
integrated CSU/DSU."
|
|
INDEX { ifIndex }
|
|
::= { ciscoICsuDsuStaticConfigTable 1 }
|
|
|
|
CiscoICsuDsuStaticConfigEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuType INTEGER,
|
|
ciscoICsuDsuHwRevision DisplayString (SIZE (1..16)),
|
|
ciscoICsuDsuSwRevision DisplayString (SIZE (1..16)),
|
|
ciscoICsuDsuProtocolRevision DisplayString (SIZE (1..16))
|
|
}
|
|
|
|
ciscoICsuDsuType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fractionalT1 (1),
|
|
twoWireSwitched56k (2),
|
|
fourWireSwitched56k (3),
|
|
unknown (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of line interface or CSU/DSU."
|
|
::= { ciscoICsuDsuStaticConfigEntry 1 }
|
|
|
|
ciscoICsuDsuHwRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CSU/DSU hardware revision."
|
|
::= { ciscoICsuDsuStaticConfigEntry 2 }
|
|
|
|
ciscoICsuDsuSwRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CSU/DSU software revision."
|
|
::= { ciscoICsuDsuStaticConfigEntry 3 }
|
|
|
|
ciscoICsuDsuProtocolRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Protocol Revision of the CSU/DSU."
|
|
::= { ciscoICsuDsuStaticConfigEntry 4 }
|
|
|
|
|
|
|
|
--****************************************************************************
|
|
-- The CSU/DSU Test Report Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuTestReportTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuTestReportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CSU/DSU test report Table. Contains the results of user
|
|
initiated tests, including selftest, reset, and loopback."
|
|
::= { ciscoICsuDsuGeneral 2 }
|
|
|
|
ciscoICsuDsuTestReportEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuTestReportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the test report table for each integrated
|
|
CSU/DSU."
|
|
INDEX { ifIndex }
|
|
::= { ciscoICsuDsuTestReportTable 1 }
|
|
|
|
CiscoICsuDsuTestReportEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuLastSelfTestResult Integer32,
|
|
ciscoICsuDsuTimeOfLastSelfTest TimeStamp,
|
|
ciscoICsuDsuNumResets Counter32,
|
|
ciscoICsuDsuTimeOfLastReset TimeStamp,
|
|
ciscoICsuDsuLoopbackStatus INTEGER,
|
|
ciscoICsuDsuLoopbackNumErrors Integer32,
|
|
ciscoICsuDsuLoopbackDuration TimeTicks,
|
|
ciscoICsuDsuLoopbackPoint INTEGER,
|
|
ciscoICsuDsuLoopbackPattern INTEGER,
|
|
ciscoICsuDsuUserDefinedPattern DisplayString (SIZE (1..24)),
|
|
ciscoICsuDsuLoopbackCode INTEGER,
|
|
ciscoICsuDsuEndTimeOfLastLoopback TimeStamp
|
|
}
|
|
|
|
ciscoICsuDsuLastSelfTestResult OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last self test. Represented as a sum of
|
|
a bit map. The variable bit positions are:
|
|
1 - Flash Checksum bad. Catastrophic error.
|
|
2 - EPROM Checksum bad. Catastrophic error.
|
|
4 - RAM Tests failed. Catastrophic error.
|
|
8 - ROM Checksum bad. Catastrophic error.
|
|
16 - DteLoss. Could not put DTE into loopback.
|
|
NonCatastrophic error.
|
|
32 - patternLossDuringTest. Put DTE into loopback but found
|
|
BERT errors. NonCatastrophic error."
|
|
::= { ciscoICsuDsuTestReportEntry 1 }
|
|
|
|
ciscoICsuDsuTimeOfLastSelfTest OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SysUpTime of LastSelfTest execution."
|
|
::= { ciscoICsuDsuTestReportEntry 2 }
|
|
|
|
ciscoICsuDsuNumResets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times CSU/DSU has been reset."
|
|
::= { ciscoICsuDsuTestReportEntry 3 }
|
|
|
|
ciscoICsuDsuTimeOfLastReset OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SysUpTime of last CSU/DSU reset."
|
|
::= { ciscoICsuDsuTestReportEntry 4 }
|
|
|
|
ciscoICsuDsuLoopbackStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
completed (1),
|
|
inProgress (2),
|
|
neverPerformed (3),
|
|
failed (4),
|
|
noSyncWithTestPattern (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Status of Loopback. Remaining Loopback results
|
|
are valid only if status is 'completed' or 'failed' or
|
|
'noSyncWithTestPattern'."
|
|
::= { ciscoICsuDsuTestReportEntry 5 }
|
|
|
|
ciscoICsuDsuLoopbackNumErrors OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Bit errors that occurred in last successful loopback
|
|
test. Valid only if remote loopback with pattern was
|
|
performed and a sync was achieved on the test pattern."
|
|
::= { ciscoICsuDsuTestReportEntry 6 }
|
|
|
|
ciscoICsuDsuLoopbackDuration OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Duration of last successful loopback test in hundredths of
|
|
seconds. Note that it is possible for the CSU/DSU to lose
|
|
framing during the test. If so, the duration represents the
|
|
time between reframing and end of test. This simply means
|
|
that the start time of last loopback cannot be calculated by
|
|
subtracting this duration from the end time of last loopback."
|
|
::= { ciscoICsuDsuTestReportEntry 7 }
|
|
|
|
ciscoICsuDsuLoopbackPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dtePayload (1),
|
|
dteFull (2),
|
|
lineFull (3),
|
|
linePayload (4),
|
|
remoteSmartJack (5),
|
|
remoteFull (6),
|
|
remotePayload (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Point in network where last loopback was performed.
|
|
|
|
Meaning for t1 CSU/DSU:
|
|
dtePayload - local DSU loopback. The configured 'fractions'
|
|
of the DS1 signal is looped back as the receive signal.
|
|
Used to verify operation of DSU portion of local
|
|
CSU/DSU.
|
|
dteFull - local CSU loopback. DS1 transmit signal is looped
|
|
back as the receive signal. Runs at full bandwidth
|
|
irrespective of fractions configured. Used to verify
|
|
operation of local CSU/DSU.
|
|
lineFull - DS1 signal received from the network is transmitted
|
|
back to the network. Signal is regenerated but not
|
|
reframed. Loopback performed at the CSU. Used to
|
|
verify operation of T1 network.
|
|
linePayload - DS1 signal received from the network is
|
|
transmitted back to the network. Data is regenerated
|
|
and reframed with any LCV or CRC errors corrected.
|
|
Loopback performed at the DSU. Used to verify
|
|
operation of local CSU/DSU and T1 network.
|
|
remoteSmartJack - the remote smart jack (telco installed wall
|
|
socket device used to delineate network between CPE and
|
|
telco equipment) is used to loopback the DS1 signal.
|
|
Similar to remoteFull loopback except that the signal
|
|
is looped at the smart jack before reaching remote
|
|
CSU/DSU. Used to verify operation of local CSU/DSU
|
|
and T1 network.
|
|
remoteFull - remote unit placed in lineFull loopback.
|
|
Used to verify operation of local CSU/DSU and T1
|
|
network.
|
|
remotePayload - remote unit placed in linePayload loopback
|
|
Used to verify operation of local CSU/DSU, T1 network,
|
|
and remote CSU/DSU.
|
|
|
|
Meaning for switched 56k CSU/DSU:
|
|
dteFull - local CSU loopback. Transmit signal is looped back
|
|
as the receive signal at a point close to the physical
|
|
network interface. Used to verify operation of local
|
|
CSU/DSU.
|
|
lineFull - CSU/DSU is split into separate DTE and loop
|
|
interface sections. Signal received from the network
|
|
is transmitted back to the network. Data received
|
|
from DTE is transmitted back to DTE. Used to verify
|
|
operation of local CSU/DSU and network from remote site.
|
|
linePayload - Signal received from the network is looped
|
|
back at the DTE interface and transmitted back to the
|
|
network. Data received from DTE is ignored. Used to
|
|
verify operation of local CSU/DSU and network from
|
|
remote site.
|
|
remotePayload - Similar to linePayload except that the
|
|
remote unit is placed into loopback. Used to verify
|
|
operation of local CSU/DSU, T1 network, and remote
|
|
CSU/DSU.
|
|
"
|
|
::= { ciscoICsuDsuTestReportEntry 8 }
|
|
|
|
ciscoICsuDsuLoopbackPattern OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noPattern (1),
|
|
patternQRW (2),
|
|
pattern0In1 (3),
|
|
pattern1In1 (4),
|
|
pattern1In2 (5),
|
|
pattern1In3 (6),
|
|
pattern1In5 (7),
|
|
pattern1In8 (8),
|
|
pattern3In24 (9),
|
|
patternUser (10),
|
|
pattern2047 (11),
|
|
pattern511 (12),
|
|
patternStressDDS1 (13),
|
|
patternStressDDS2 (14),
|
|
patternStressDDS3 (15),
|
|
patternStressDDS4 (16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Test pattern used for locally initiated remote loopback.
|
|
Valid only if a remote loopback was last performed.
|
|
|
|
Following patterns valid for T1 or Switched 56k CSU/DSU:
|
|
noPattern - no specific pattern is used, data provided by
|
|
the DTE. Used to loopback transmit data.
|
|
|
|
Following patterns only valid for T1 CSU/DSU:
|
|
patternQRW - Quasi-Random Word pattern. Specifically used to
|
|
measure Bit Error Rates.
|
|
pattern0In1 - repeated binary pattern of '0' or all zeros.
|
|
Typically used for verification of B8ZS optioning
|
|
of the T1 facility.
|
|
pattern1In1 - repeated binary pattern of '1' or all ones.
|
|
Typically used for signal power measurements.
|
|
pattern1In2 - repeated binary pattern of '01'. Typically
|
|
used in testing for bridge taps.
|
|
pattern1In3 - repeated binary pattern of '001'. Typically
|
|
used to terminate a remote loopback.
|
|
pattern1In5 - repeated binary pattern of '00001'. Typically
|
|
used to put the remote unit in loopback.
|
|
pattern1In8 - repeated binary pattern of '00000001'.
|
|
Typically used to stress the timing recovery circuits
|
|
of repeaters and other intermediate equipment.
|
|
pattern3In24 - repeated binary pattern of
|
|
'000000000000000000000111' or hex '000007'.
|
|
Typically used to test for one's density
|
|
(consecutive zeros) tolerance on AMI lines.
|
|
patternUser - user defined pattern.
|
|
|
|
Following patterns only valid for Switched 56k CSU/DSU:
|
|
pattern2047 - 2047 bit long pseudorandom pattern containing a
|
|
maximum of 10 sequential zeros and 11 sequential ones.
|
|
pattern511 - 511 bit long pseudorandom pattern containing a
|
|
maximum of 8 sequential zeros and 9 sequential ones.
|
|
patternStressDDS1 - DDS Stress test pattern #1.
|
|
patternStressDDS2 - DDS Stress test pattern #2.
|
|
patternStressDDS3 - DDS Stress test pattern #3.
|
|
patternStressDDS4 - DDS Stress test pattern #4."
|
|
::= { ciscoICsuDsuTestReportEntry 9 }
|
|
|
|
ciscoICsuDsuUserDefinedPattern OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Defined Loopback Pattern. Valid only if
|
|
ciscoICsuDsuLoopbackPattern is patternUser."
|
|
::= { ciscoICsuDsuTestReportEntry 10 }
|
|
|
|
ciscoICsuDsuLoopbackCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard (1),
|
|
alternate (2),
|
|
v54 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LoopCode used to initiate last remote loopback. Valid only
|
|
if a only if a remote loopback was last performed.
|
|
standard - standard loopback code. Usually consists of the
|
|
repeated binary pattern of '00001'
|
|
alternate - alternate loopback code. Usually the inverse of
|
|
the standard pattern or '11110'.
|
|
v54 - V.54 pattern. Used for fractional loopback."
|
|
::= { ciscoICsuDsuTestReportEntry 11 }
|
|
|
|
ciscoICsuDsuEndTimeOfLastLoopback OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SysUpTime of completion of last loopback test execution."
|
|
::= { ciscoICsuDsuTestReportEntry 12 }
|
|
|
|
--****************************************************************************
|
|
-- The T1 CSU/DSU Module Configuration Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuT1ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuT1ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The T1 CSU/DSU Unit Configuration Table. Contains current
|
|
T1 CSU/DSU configuration parameters not covered by RFC1406."
|
|
::= { ciscoICsuDsuT1 1 }
|
|
|
|
ciscoICsuDsuT1ConfigEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuT1ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the configuration table for each integrated
|
|
T1 CSU/DSU."
|
|
AUGMENTS { dsx1ConfigEntry }
|
|
::= { ciscoICsuDsuT1ConfigTable 1 }
|
|
|
|
CiscoICsuDsuT1ConfigEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuT1LineBuildOut INTEGER,
|
|
ciscoICsuDsuT1DteLineCode INTEGER,
|
|
ciscoICsuDsuT1SupportRemoteAlarmIndication TruthValue,
|
|
ciscoICsuDsuT1FullBandwidthRemoteLoopcode INTEGER,
|
|
ciscoICsuDsuT1PayloadRemoteLoopcode INTEGER
|
|
}
|
|
|
|
ciscoICsuDsuT1LineBuildOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
buildOut0 (1),
|
|
buildOut7p5 (2),
|
|
buildOut15 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Line build out (LBO) is loss inserted by the CSU
|
|
in order to meet the 15 to 22.5 dB loss requirement
|
|
of the premises remote-end section. Selected so
|
|
that (phone company loss) + (cable length loss) +
|
|
(line build out) is greater that 15dB but less than
|
|
22.5 dB.
|
|
buildOut0 means insert 0 dB.
|
|
buildOut7p5 means insert 7.5 dB.
|
|
buildOut15 means insert 15 dB."
|
|
::= { ciscoICsuDsuT1ConfigEntry 1 }
|
|
|
|
ciscoICsuDsuT1DteLineCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
inverted (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the DTE line code is inverted or not.
|
|
When fractional timeslots are configured for 64kps and AMI
|
|
linecode, a combination of inverting the DTE line code along
|
|
with the proper line protocol (i.e. HDLC/SDLC) may be necessary
|
|
to meet the ones density constraint."
|
|
::= { ciscoICsuDsuT1ConfigEntry 2 }
|
|
|
|
ciscoICsuDsuT1SupportRemoteAlarmIndication OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines if unit will generate or detect a remote alarm
|
|
indication (RAI) signal which is also known as a yellow alarm.
|
|
In D4 framing format, DTE equipment (including Frame Relay
|
|
equipment) that is using the HDLC or SDLC protocol may
|
|
generate patterns as part of its normal traffic. These
|
|
patterns may be interpreted as yellow alarms and disrupt data
|
|
traffic."
|
|
::= { ciscoICsuDsuT1ConfigEntry 3 }
|
|
|
|
ciscoICsuDsuT1FullBandwidthRemoteLoopcode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard (1),
|
|
alternate (2),
|
|
disabled (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LoopCode to be accepted from remote end to place unit in
|
|
and out of full bandwidth loopback.
|
|
standard - standard loopback code. Usually consists of the
|
|
repeated binary pattern of '00001'
|
|
alternate - alternate loopback code. Usually the inverse of
|
|
the standard pattern or '11110'.
|
|
disabled - No code is accepted, disabling an request for
|
|
remote loopback."
|
|
::= { ciscoICsuDsuT1ConfigEntry 4 }
|
|
|
|
ciscoICsuDsuT1PayloadRemoteLoopcode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard (1),
|
|
alternate (2),
|
|
disabled (3),
|
|
v54 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LoopCode to be accepted from remote end to place unit in
|
|
and out of payload or fractional loopback.
|
|
standard - standard loopback code. Usually consists of the
|
|
repeated binary pattern of '00001'
|
|
alternate - alternate loopback code. Usually the inverse of
|
|
the standard pattern or '11110'.
|
|
disabled - No code is accepted, disabling an request for
|
|
remote loopback.
|
|
v54 - V.54 pattern. Used for fractional loopback."
|
|
::= { ciscoICsuDsuT1ConfigEntry 5 }
|
|
|
|
--****************************************************************************
|
|
-- The T1 CSU/DSU Status Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuT1StatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuT1StatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The T1 CSU/DSU Unit Status Table. Contains information about
|
|
the status of the CSU/DSU, including externally generated
|
|
alarm conditions."
|
|
::= { ciscoICsuDsuT1 2 }
|
|
|
|
ciscoICsuDsuT1StatusEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuT1StatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the status table for each integrated T1 CSU/DSU."
|
|
INDEX { ifIndex }
|
|
::= { ciscoICsuDsuT1StatusTable 1 }
|
|
|
|
CiscoICsuDsuT1StatusEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuT1LoopStatus Integer32,
|
|
ciscoICsuDsuT1LossOfSignals Counter32,
|
|
ciscoICsuDsuT1LossOfFrames Counter32,
|
|
ciscoICsuDsuT1RemoteAlarmIndications Counter32,
|
|
ciscoICsuDsuT1AlarmIndicationSignals Counter32
|
|
}
|
|
|
|
ciscoICsuDsuT1LoopStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Loop status of T1 CSU/DSU. Represented as a sum of
|
|
a bit map. The variable bit positions are:
|
|
1 - lossofSignal (LOS); unable to detect the DS1 signal.
|
|
2 - lossofFrame (LOF); unable to synchronize on the DS1
|
|
signal.
|
|
4 - detectedRemoteAlarmIndication (RAI); indicates that the
|
|
transmitting equipment has lost its incoming signal.
|
|
RAI is commonly called yellow alarm.
|
|
8 - detectedAlarmIndicationSignal (AIS); indicates that there
|
|
is a transmission interruption located either at the
|
|
equipment originating the AIS signal or upstream of
|
|
that equipment. Indicated by an unframed, all-'ones'
|
|
signal. Also known as blue alarm.
|
|
16 - placedInLoopback; Line placed in loopback from remote."
|
|
::= { ciscoICsuDsuT1StatusEntry 1 }
|
|
|
|
ciscoICsuDsuT1LossOfSignals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times lossofSignal event detected."
|
|
::= { ciscoICsuDsuT1StatusEntry 2 }
|
|
|
|
ciscoICsuDsuT1LossOfFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times lossofFrame event detected."
|
|
::= { ciscoICsuDsuT1StatusEntry 3 }
|
|
|
|
ciscoICsuDsuT1RemoteAlarmIndications OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times RemoteAlarmIndication signal or yellow alarm
|
|
received."
|
|
::= { ciscoICsuDsuT1StatusEntry 4 }
|
|
|
|
ciscoICsuDsuT1AlarmIndicationSignals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times Alarm Indication Signal or blue alarm
|
|
received."
|
|
::= { ciscoICsuDsuT1StatusEntry 5 }
|
|
|
|
|
|
--****************************************************************************
|
|
-- The Sw56k CSU/DSU Module Configuration Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuSw56kConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuSw56kConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Switched 56k CSU/DSU Configuration Table. Contains
|
|
current Sw56k CSU/DSU configuration parameters."
|
|
::= { ciscoICsuDsuSw56k 1 }
|
|
|
|
ciscoICsuDsuSw56kConfigEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuSw56kConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the sw56k configuration table for each integrated
|
|
switched 56 kbps CSU/DSU."
|
|
INDEX { ifIndex }
|
|
::= { ciscoICsuDsuSw56kConfigTable 1 }
|
|
|
|
CiscoICsuDsuSw56kConfigEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuSw56kNetworkType INTEGER,
|
|
ciscoICsuDsuSw56kClockSource INTEGER,
|
|
ciscoICsuDsuSw56kLoopRate INTEGER,
|
|
ciscoICsuDsuSw56kScramblerEnabled TruthValue,
|
|
ciscoICsuDsuSw56kRemoteLoopbackEnabled TruthValue
|
|
}
|
|
|
|
ciscoICsuDsuSw56kNetworkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dds (1),
|
|
att (2),
|
|
sprint (3),
|
|
otherCarrier (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the DSU Module for the specific type of network
|
|
being used.
|
|
dds - AT&T's Dataphone Digital Service, generically known
|
|
as Digital Data System. Requires 4-Wire interface.
|
|
att - AT&T's Switched 56 Network. Operates over 2-Wire or
|
|
or 4-Wire interface.
|
|
sprint - Sprint Switched 56 Network. Operates over 2-Wire or
|
|
4-Wire interface.
|
|
otherCarrier - Other carrier being used."
|
|
::= { ciscoICsuDsuSw56kConfigEntry 1 }
|
|
|
|
ciscoICsuDsuSw56kClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal (1),
|
|
line (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the timing source for the DSU. 'internal'
|
|
indicates timing provided by DSU. 'line' indicates timing
|
|
provided by network receive signal."
|
|
::= { ciscoICsuDsuSw56kConfigEntry 2 }
|
|
|
|
ciscoICsuDsuSw56kLoopRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps2400 (1),
|
|
bps4800 (2),
|
|
bps9600 (3),
|
|
bps19k (4),
|
|
bps38k (5),
|
|
bps56k (6),
|
|
bps64k (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Loop Rate option selects the network loop operating
|
|
speed. Only 'ciscoICsuDsuSw56kNetworkType' of 'dds' supports
|
|
all listed loop rates. 'att' and 'sprint' network types only
|
|
support 'bps56k' or 56 kilobits per second."
|
|
::= { ciscoICsuDsuSw56kConfigEntry 3 }
|
|
|
|
ciscoICsuDsuSw56kScramblerEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if line code scrambling is enabled. Scrambling is
|
|
used to prevent DTE data sequences that minic network loop
|
|
maintenance functions from activating loopback.
|
|
Only supported when operating in DDS mode at 64kbps (also
|
|
known as clear channel mode)."
|
|
::= { ciscoICsuDsuSw56kConfigEntry 4 }
|
|
|
|
ciscoICsuDsuSw56kRemoteLoopbackEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a request for Remote Digital Loopback is
|
|
will be accepted."
|
|
::= { ciscoICsuDsuSw56kConfigEntry 5 }
|
|
|
|
|
|
--****************************************************************************
|
|
-- The Sw56k CSU/DSU Module Status Group
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuSw56kLineStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoICsuDsuSw56kLineStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Sw56k CSU/DSU Status Table. Contains information about
|
|
the status of the CSU/DSU, including externally generated
|
|
alarm conditions."
|
|
::= { ciscoICsuDsuSw56k 2 }
|
|
|
|
ciscoICsuDsuSw56kLineStatusEntry OBJECT-TYPE
|
|
SYNTAX CiscoICsuDsuSw56kLineStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the sw56k status table for each integrated
|
|
switched 56 kbps CSU/DSU."
|
|
INDEX { ifIndex }
|
|
::= { ciscoICsuDsuSw56kLineStatusTable 1 }
|
|
|
|
CiscoICsuDsuSw56kLineStatusEntry ::=
|
|
SEQUENCE {
|
|
ciscoICsuDsuSw56kDialingStatus INTEGER,
|
|
ciscoICsuDsuSw56kLoopStatus Integer32,
|
|
ciscoICsuDsuSw56kReceivedOosOofs Counter32,
|
|
ciscoICsuDsuSw56kLostSealingCurrents Counter32,
|
|
ciscoICsuDsuSw56kLostReceiveSignals Counter32,
|
|
ciscoICsuDsuSw56kLostFrameSyncs Counter32,
|
|
ciscoICsuDsuSw56kLoopRateSearches Counter32
|
|
}
|
|
|
|
ciscoICsuDsuSw56kDialingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle (1),
|
|
dialing (2),
|
|
online (3),
|
|
noWinkFromSwitch (4),
|
|
numberBusy (5),
|
|
noAnswer (6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the dialing status of units using
|
|
switched connections.
|
|
idle - on-hook and no call in progress.
|
|
dialing - dialing a number.
|
|
onLine - Online passing data.
|
|
noWinkFromSwitch - No wink from switch (cleared after 5
|
|
seconds). Wink is a DC signalling method in which the
|
|
polarity of the line is temporarily reversed and then
|
|
returned to its original polarity as an acknowledgement.
|
|
numberBusy - Number is busy (cleared after 5 seconds).
|
|
noAnswer - No answer. (cleared after 5 seconds)."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 1 }
|
|
|
|
ciscoICsuDsuSw56kLoopStatus OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current loop status or alarm condition. Represented as a sum
|
|
of a bit map. The variable bit positions are:
|
|
|
|
1 oosOofFromNetwork - The DSU is receiving Out of Service/
|
|
Out of Frame code from network indicating network
|
|
trouble. This can be a problem with a device at the
|
|
remote DSU. The most common cause of the this error
|
|
is either the remote DSU is powered off or the remote
|
|
telco connection is open.
|
|
2 noReceiveSignal - The DSU has detected sealing current from
|
|
the central office but the receive level is below
|
|
-45db.
|
|
4 noSealingCurrent - the DSU does not detect sealing current
|
|
on the loop interface. This is normal for a private
|
|
network.
|
|
8 noFrameSync - At 64k data rate the local loop operates at
|
|
72k with a framing pattern added to maintain byte
|
|
alignment with the network. This condition is reported
|
|
if the DSU cannot find the framing pattern.
|
|
16 attemptingToRateAdap - Set in 'autorate' mode when the DSU
|
|
is searching for the loop rate.
|
|
32 rtTestFromTelco - Set when the DSU in telco initiated RT
|
|
test.
|
|
64 llTestFromTelco - Set when the DSU in telco initiated LL
|
|
test or when the transmit and receive pairs are
|
|
reversed.
|
|
128 rdlFromRemoteDSU - Set when remote digital loopback
|
|
initiated from remote DSU."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 2 }
|
|
|
|
ciscoICsuDsuSw56kReceivedOosOofs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times OOS/OOF (Out Of Sync / Out Of Frame) code
|
|
received."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 3 }
|
|
|
|
ciscoICsuDsuSw56kLostSealingCurrents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times Lost Sealing Current."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 4 }
|
|
|
|
ciscoICsuDsuSw56kLostReceiveSignals OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times lost receive signal."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 5 }
|
|
|
|
ciscoICsuDsuSw56kLostFrameSyncs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times lost frame synchronization."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 6 }
|
|
|
|
ciscoICsuDsuSw56kLoopRateSearches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times attempted Loop Rate Search."
|
|
::= { ciscoICsuDsuSw56kLineStatusEntry 7 }
|
|
|
|
|
|
--****************************************************************************
|
|
-- Notification Enables
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuMIBNotificationEnables OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 2 }
|
|
|
|
ciscoICsuDsuEnableT1LoopStatusNotification OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not a T1 Alarm Notification will be
|
|
generated by this system."
|
|
DEFVAL { false }
|
|
::= { ciscoICsuDsuMIBNotificationEnables 1 }
|
|
|
|
ciscoICsuDsuEnableSw56kLoopStatusNotification OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not a Sw56k Alarm Notification will be
|
|
generated by this system."
|
|
DEFVAL { false }
|
|
::= { ciscoICsuDsuMIBNotificationEnables 2 }
|
|
|
|
|
|
|
|
--****************************************************************************
|
|
-- Notifications
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuMIBNotificationPrefix
|
|
OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 3 }
|
|
ciscoICsuDsuMIBNotifications
|
|
OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBNotificationPrefix 0 }
|
|
|
|
|
|
ciscoICsuDsuT1LoopStatusNotification NOTIFICATION-TYPE
|
|
OBJECTS { ciscoICsuDsuT1LoopStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates a change in T1 Loop Status."
|
|
::= { ciscoICsuDsuMIBNotifications 1 }
|
|
|
|
ciscoICsuDsuSw56kLoopStatusNotification NOTIFICATION-TYPE
|
|
OBJECTS { ciscoICsuDsuSw56kLoopStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates a change in Sw56k Loop Status."
|
|
::= { ciscoICsuDsuMIBNotifications 2 }
|
|
|
|
--****************************************************************************
|
|
-- Conformance and compliance statements
|
|
--****************************************************************************
|
|
|
|
ciscoICsuDsuMIBConformance
|
|
OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 4 }
|
|
ciscoICsuDsuMIBCompliances
|
|
OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBConformance 1 }
|
|
ciscoICsuDsuMIBGroups
|
|
OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBConformance 2 }
|
|
|
|
|
|
ciscoICsuDsuMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Cisco Integrated CSU/DSU MIB"
|
|
MODULE -- compliance to this module
|
|
MANDATORY-GROUPS {
|
|
ciscoICsuDsuMIBGroup
|
|
}
|
|
|
|
GROUP ciscoICsuDsuMIBT1Group
|
|
DESCRIPTION
|
|
"The T1 group is mandatory for devices that have a t1
|
|
interface."
|
|
|
|
GROUP ciscoICsuDsuMIBSw56kGroup
|
|
DESCRIPTION
|
|
"The Sw56k group is mandatory for devices that have a
|
|
Sw56k interface."
|
|
::= { ciscoICsuDsuMIBCompliances 1 }
|
|
|
|
|
|
ciscoICsuDsuMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ciscoICsuDsuType,
|
|
ciscoICsuDsuHwRevision,
|
|
ciscoICsuDsuSwRevision,
|
|
ciscoICsuDsuProtocolRevision,
|
|
ciscoICsuDsuLastSelfTestResult,
|
|
ciscoICsuDsuTimeOfLastSelfTest,
|
|
ciscoICsuDsuNumResets,
|
|
ciscoICsuDsuTimeOfLastReset,
|
|
ciscoICsuDsuLoopbackStatus,
|
|
ciscoICsuDsuLoopbackNumErrors,
|
|
ciscoICsuDsuLoopbackDuration,
|
|
ciscoICsuDsuLoopbackPoint,
|
|
ciscoICsuDsuLoopbackPattern,
|
|
ciscoICsuDsuUserDefinedPattern,
|
|
ciscoICsuDsuLoopbackCode,
|
|
ciscoICsuDsuEndTimeOfLastLoopback
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects providing general information
|
|
about the integrated CSU/DSU."
|
|
::= { ciscoICsuDsuMIBGroups 1 }
|
|
|
|
ciscoICsuDsuMIBT1Group OBJECT-GROUP
|
|
OBJECTS {
|
|
ciscoICsuDsuT1LineBuildOut,
|
|
ciscoICsuDsuT1DteLineCode,
|
|
ciscoICsuDsuT1SupportRemoteAlarmIndication,
|
|
ciscoICsuDsuT1FullBandwidthRemoteLoopcode,
|
|
ciscoICsuDsuT1PayloadRemoteLoopcode,
|
|
ciscoICsuDsuT1LoopStatus,
|
|
ciscoICsuDsuT1LossOfSignals,
|
|
ciscoICsuDsuT1LossOfFrames,
|
|
ciscoICsuDsuT1RemoteAlarmIndications,
|
|
ciscoICsuDsuT1AlarmIndicationSignals,
|
|
ciscoICsuDsuEnableT1LoopStatusNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects providing information specific to
|
|
integrated T1 CSU/DSU."
|
|
::= { ciscoICsuDsuMIBGroups 2 }
|
|
|
|
ciscoICsuDsuMIBSw56kGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ciscoICsuDsuSw56kNetworkType,
|
|
ciscoICsuDsuSw56kClockSource,
|
|
ciscoICsuDsuSw56kLoopRate,
|
|
ciscoICsuDsuSw56kScramblerEnabled,
|
|
ciscoICsuDsuSw56kRemoteLoopbackEnabled,
|
|
ciscoICsuDsuSw56kDialingStatus,
|
|
ciscoICsuDsuSw56kLoopStatus,
|
|
ciscoICsuDsuSw56kReceivedOosOofs,
|
|
ciscoICsuDsuSw56kLostSealingCurrents,
|
|
ciscoICsuDsuSw56kLostReceiveSignals,
|
|
ciscoICsuDsuSw56kLostFrameSyncs,
|
|
ciscoICsuDsuSw56kLoopRateSearches,
|
|
ciscoICsuDsuEnableSw56kLoopStatusNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects providing information specific to
|
|
integrated Switched 56k CSU/DSU."
|
|
::= { ciscoICsuDsuMIBGroups 3 }
|
|
|
|
END
|
|
|
|
|