snmp_mib_archive/CISCO-FLEX-LINKS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

593 lines
20 KiB
Plaintext

-- *********************************************************************
-- CISCO-FLEX-LINKS-MIB.my: Flex Links MIB
--
-- March 2005, Dipesh Gorashia
-- January 2010, Jayakumar Kadirvelu
--
-- Copyright (c) 2005, 2010 by Cisco Systems, Inc.
-- All rights reserved.
-- *********************************************************************
CISCO-FLEX-LINKS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
RowStatus,
StorageType
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
VlanIdOrNone
FROM Q-BRIDGE-MIB
Cisco2KVlanList
FROM CISCO-TC;
ciscoFlexLinksMIB MODULE-IDENTITY
LAST-UPDATED "201002040000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"This MIB module is for configuration and status query
of Flex Links feature on the Cisco device.
Flex Links are a pair of Layer 2 interfaces, where one
interface is configured to act as a backup to the other.
The feature provides an alternative solution to the
Spanning Tree Protocol (STP), allowing users to turn
off STP and still provide basic link redundancy.
Flex Links are typically configured in service provider
or enterprise networks where users do not want to run
STP on the device."
REVISION "201002040000Z"
DESCRIPTION
"Added the followings groups:
ciscoFlexLinksMmuPrimaryVlanGroup,
ciscoFlexLinksPreemptionGroup,
ciscoFlexLinksPreferVlanGroup.
Added enumeration 'vlbAll', 'vlbConfig' and
'vlbPreempt' to cflIfStatus."
REVISION "200504250000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 471 }
ciscoFlexLinksMIBNotifs OBJECT IDENTIFIER ::=
{ ciscoFlexLinksMIB 0 }
ciscoFlexLinksMIBObjects OBJECT IDENTIFIER ::=
{ ciscoFlexLinksMIB 1 }
ciscoFlexLinksMIBConformance OBJECT IDENTIFIER ::=
{ ciscoFlexLinksMIB 2 }
cflConfig OBJECT IDENTIFIER ::=
{ ciscoFlexLinksMIBObjects 1 }
cflStatus OBJECT IDENTIFIER ::=
{ ciscoFlexLinksMIBObjects 2 }
-- Flex Links configuration table
cflIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CflIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows user to configure Flex Links.
The Flex Links feature requires interface pairs to be
setup. This table allows user to specify such
interface pairs.
An interface can become part of only one such interface
pair at any given time."
::= { cflConfig 1 }
cflIfConfigEntry OBJECT-TYPE
SYNTAX CflIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about Flex Links
configuration. Each entry configures a pair of
interfaces for a Flex Links.
Only those Layer 2 interfaces which are capable of
performing Flex Links operation may be configured
in this table.
Once an interface is configured as part of a Flex Links
pair, such an interface, can not be configured as a
part of other Flex Links pairs."
INDEX { cflIfConfigPrimary }
::= { cflIfConfigTable 1 }
CflIfConfigEntry ::= SEQUENCE {
cflIfConfigPrimary InterfaceIndex,
cflIfConfigBackUp InterfaceIndexOrZero,
cflIfConfigStorageType StorageType,
cflIfConfigStatus RowStatus
}
cflIfConfigPrimary OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the primary interface in this
Flex Links pair."
::= { cflIfConfigEntry 1 }
cflIfConfigBackUp OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the back up interface in this
Flex Links pair.
The value of this object is changed to 0 (zero) if this
interface is removed from the ifTable. The SNMP agent
is responsible for updating this object's value once
the interface is added to the ifTable. The value of
0 (zero) cannot be set."
::= { cflIfConfigEntry 2 }
cflIfConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { nonVolatile }
::= { cflIfConfigEntry 3 }
cflIfConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object to manage this RowStatus entry.
This object must be set to 'creatAndGo' to
create an entry and set to 'destroy' to delete an
entry.
The other objects in this conceptual row can be
modified any time, even when the value of this entry
RowStatus object is 'active'."
::= { cflIfConfigEntry 4 }
cflEnableStatusChangeNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system
produces the cflIfStatusChangeNotif.
A value of 'false' will prevent
cflIfStatusChangeNotif."
::= { cflConfig 2 }
-- Flex Links configuration Extension table
cflIfConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CflIfConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains management information, such as
of MAC address-table Move Update(MMU), preemption
mechanism, VLAN load balancing of Flex Links pair,
of interfaces which are capable of supporting these
features."
::= { cflConfig 3 }
cflIfConfigExtEntry OBJECT-TYPE
SYNTAX CflIfConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Flex Links management information
for a particular interface."
INDEX { cflIfConfigPrimary }
::= { cflIfConfigExtTable 1 }
CflIfConfigExtEntry ::= SEQUENCE {
cflIfConfigMmuPrimaryVlan VlanIdOrNone,
cflIfConfigPreemptionMode INTEGER,
cflIfConfigPreemptionDelay Unsigned32,
cflIfConfigPrefer2kVlan Cisco2KVlanList,
cflIfConfigPrefer4kVlan Cisco2KVlanList
}
cflIfConfigMmuPrimaryVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the MAC address-table Move
Update primary VLAN for the Flex Links interface pair.
A value of zero indicates that no primary VLAN has been
configured for MAC address-table Move Update."
::= { cflIfConfigExtEntry 1 }
cflIfConfigPreemptionMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
forced(2),
bandwidth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the preemption mechanism for
a Flex Link interface pair.
off - No preemption happens from active interface
to backup interface.
forced - The active interface always preempts the
backup interface. The preemption occurs
after the time specified in
cflIfConfigPreemptionDelay.
bandwidth - The interface with higher bandwidth
always acts as the active interface."
::= { cflIfConfigExtEntry 2 }
cflIfConfigPreemptionDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the delay time until an
interface preempts another interface for a
Flex Link interface pair."
::= { cflIfConfigExtEntry 3 }
cflIfConfigPrefer2kVlan OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per
perferred VLAN of VLANs with VlanId values of 0
through 2047 for VLAN load balancing."
::= { cflIfConfigExtEntry 4 }
cflIfConfigPrefer4kVlan OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per
perferred VLAN of VLANs with VlanId values of 2048
through 4095 for VLAN load balancing."
::= { cflIfConfigExtEntry 5 }
-- Flex Links status table
cflIfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CflIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interfaces which are members of Flex Links."
::= { cflStatus 1 }
cflIfStatusEntry OBJECT-TYPE
SYNTAX CflIfStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry, containing status information about a
Flex Links interface.
Entry is created when an interface is configured as
a member of a Flex Links. When an entry is created
in the cflIfConfigTable, entries corresponding to
cflIfConfigPrimary and cflIfConfigBackUp are created
in this table.
Entry is deleted when an interface is removed from
a Flex Links. When an entry is removed from the
cflIfConfigTable, entries corresponding to
cflIfConfigPrimary and cflIfConfigBackUp are deleted
from this table."
INDEX { cflIfIndex }
::= { cflIfStatusTable 1 }
CflIfStatusEntry ::= SEQUENCE {
cflIfIndex InterfaceIndex,
cflIfStatus INTEGER
}
cflIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the
interface to which this entry is applicable.
cflIfIndex is the same as the ifIndex of the
interface associated with a Flex Links."
::= { cflIfStatusEntry 1 }
cflIfStatus OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
blocking(2),
down(3),
waitingToSync(4),
waitingForPeerStrate(5),
unknown(6),
vlbAll(7),
vlbConfig(8),
vlbPreempt(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of an interface which is participating in
Flex Links operation.
A value of 'forwarding' indicates that, the interface is
participating in Flex Links operation and is
actively forwarding traffic.
A value of 'blocking' indicates that, interface is
participating in Flex Links operation and is ready
to forward traffic if the interface it backs up in
Flex Links operation goes down.
A value of 'down' indicates that, the interface
participating in Flex Links operation has gone down.
A value of 'waitingToSync' indicates that, the interface
is participating in Flex Links operation and is waiting
to sync with its peer interface.
A value of 'waitingForPeerState' indicates that, the
interface is participating in Flex Links operation and
is waiting for its peer's state.
A value of 'unknown' indicates that, the interface
is participating Flex Links operation and has entered
an unknown state.
A value of 'vlbAll' indicates that, the interface is
linkup and VLANs preferred on the peer interface are
moved to this interface of the Flex Link pair.
This means that this interface carries all preferred
VLANs of the Flex Link pair.
A value of 'vlbConfig' indicates that, the interface
is linkup and VLANs preferred on this interface have
moved to forwarding state on the interface.
A value of 'vlbPreempt' indicates that, the interface
is linkup and waiting for the timer to expire to
move into 'vlbConfig' state."
::= { cflIfStatusEntry 2 }
-- Notifications
cflIfStatusChangeNotif NOTIFICATION-TYPE
OBJECTS {
cflIfStatus
}
STATUS current
DESCRIPTION
"A cflIfStatusChangeNotif is generated when the
value of cflIfStatus changes."
::= { ciscoFlexLinksMIBNotifs 1 }
-- Conformance
ciscoFlexLinksMIBCompliances OBJECT IDENTIFIER
::= { ciscoFlexLinksMIBConformance 1 }
ciscoFlexLinksMIBGroups OBJECT IDENTIFIER
::= { ciscoFlexLinksMIBConformance 2 }
ciscoFlexLinksMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-FLEX-LINKS-MIB.
This compliance is deprecated and replaced by
ciscoFlexLinksMIBCompliance2."
MODULE -- this module
MANDATORY-GROUPS {
ciscoFlexLinksIfConfigGroup,
ciscoFlexLinksIfStatusGroup,
ciscoFlexLinksEnableNotifGroup,
ciscoFlexLinksNotifGroup
}
::= { ciscoFlexLinksMIBCompliances 1 }
ciscoFlexLinksMIBCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-FLEX-LINKS-MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoFlexLinksIfConfigGroup,
ciscoFlexLinksIfStatusGroup,
ciscoFlexLinksEnableNotifGroup,
ciscoFlexLinksNotifGroup
}
GROUP ciscoFlexLinksMmuPrimaryVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which support MMU primary VLAN feature."
GROUP ciscoFlexLinksPreemptionGroup
DESCRIPTION
"This group is mandatory in devices running software
which support preemption feature."
GROUP ciscoFlexLinksPreferVlanGroup
DESCRIPTION
"This group is mandatory in devices running software
which support preferred VLANs of vlan load balancing
feature."
OBJECT cflIfConfigBackUp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support for createAndWait and notInService is not required."
OBJECT cflEnableStatusChangeNotif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigMmuPrimaryVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigPreemptionMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigPreemptionDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigPrefer2kVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cflIfConfigPrefer4kVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoFlexLinksMIBCompliances 2 }
-- Units of Conformance
ciscoFlexLinksIfConfigGroup OBJECT-GROUP
OBJECTS {
cflIfConfigBackUp,
cflIfConfigStorageType,
cflIfConfigStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing interface
configuration information for Flex Links."
::= { ciscoFlexLinksMIBGroups 1 }
ciscoFlexLinksIfStatusGroup OBJECT-GROUP
OBJECTS {
cflIfStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing interface
status information for Flex Links."
::= { ciscoFlexLinksMIBGroups 2 }
ciscoFlexLinksEnableNotifGroup OBJECT-GROUP
OBJECTS {
cflEnableStatusChangeNotif
}
STATUS current
DESCRIPTION
"A collection of objects providing enabling/disabling
of the status change notifications for Flex
Links."
::= { ciscoFlexLinksMIBGroups 3 }
ciscoFlexLinksNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cflIfStatusChangeNotif
}
STATUS current
DESCRIPTION
"A collection of notifications providing the status
change for Flex Links."
::= { ciscoFlexLinksMIBGroups 4 }
ciscoFlexLinksMmuPrimaryVlanGroup OBJECT-GROUP
OBJECTS {
cflIfConfigMmuPrimaryVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing interface
MMU primary VLAN information of Flex Links."
::= { ciscoFlexLinksMIBGroups 5 }
ciscoFlexLinksPreemptionGroup OBJECT-GROUP
OBJECTS {
cflIfConfigPreemptionMode,
cflIfConfigPreemptionDelay
}
STATUS current
DESCRIPTION
"A collection of objects providing interface
preemption information of Flex Links."
::= { ciscoFlexLinksMIBGroups 6 }
ciscoFlexLinksPreferVlanGroup OBJECT-GROUP
OBJECTS {
cflIfConfigPrefer2kVlan,
cflIfConfigPrefer4kVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing interface
preferred VLANs of vlan load balancing information
of Flex Links."
::= { ciscoFlexLinksMIBGroups 7 }
END