MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-FCS-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1660 lines
63 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-FCS-MIB.my: Fabric Configuration Server Mib
--
-- September 2002, H K Vivek
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-FCS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32, Integer32, Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TruthValue, TestAndIncr,
TimeStamp, RowStatus,
TEXTUAL-CONVENTION FROM SNMPv2-TC
ciscoMgmt FROM CISCO-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
ListIndex, ListIndexOrZero,
TimeIntervalSec FROM CISCO-TC
FcNameId, FcAddressId,
DomainIdOrZero,
FcPortTypes, FcPortTxTypes,
FcPortModuleTypes, VsanIndex FROM CISCO-ST-TC
vsanIndex FROM CISCO-VSAN-MIB
FcGs3RejectReasonCode FROM CISCO-NS-MIB
FcList FROM CISCO-ZS-MIB;
ciscoFcsMIB MODULE-IDENTITY
LAST-UPDATED "200402190000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"The MIB module for the management of a Fabric
Configuration Server (FCS). An FCS is defined
by the FC-GS3 standard. This MIB enables managers
to configure and monitor FCS parameters."
REVISION "200402190000Z"
DESCRIPTION
"Added notification fcsMgmtAddrChangeNotify."
REVISION "200308200000Z"
DESCRIPTION
"Changed the max lengths of fcsPlatformName,
fcsIeLogicalName and fcsMgmtAddr to 255 from
256. Changed the min length of fcsPlatformName
from 2 to 1."
REVISION "200212180000Z"
DESCRIPTION
"Changed the ranges of fcsPortNumber and
fcsPlatformNumber objects, so that they
start from 0."
REVISION "200210070000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 297 }
ciscoFcsMIBObjects OBJECT IDENTIFIER ::= { ciscoFcsMIB 1 }
fcsMIBConformance OBJECT IDENTIFIER ::= { ciscoFcsMIB 2 }
fcsConfiguration OBJECT IDENTIFIER ::= { ciscoFcsMIBObjects 1 }
fcsStats OBJECT IDENTIFIER ::= { ciscoFcsMIBObjects 2 }
fcsInformation OBJECT IDENTIFIER ::= { ciscoFcsMIBObjects 3 }
fcsNotification OBJECT IDENTIFIER ::= { ciscoFcsMIBObjects 4 }
fcsNotifications OBJECT IDENTIFIER ::= { fcsNotification 0 }
CreatedBy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When an object with this syntax is specified as
a columnar object, then each instance of the
object indicates how the row which contains that
instance was created.
createdByMgmt(1) - indicates that the
entry was created via SNMP.
learnedviaGS3(2) - indicates that the entry was
configured by GS-3."
SYNTAX INTEGER {
createdByMgmt(1),
learnedviaGS3(2)
}
FcIeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of Interconnect Element (IE).
unknown(1) - unknown IE.
other(2) - other type of IE.
switch(3) - IE is a switch.
hub(4) - IE is a hub.
bridge(5) - IE is a bridge."
SYNTAX INTEGER {
unknown(1),
other(2),
switch(3),
hub(4),
bridge(5)
}
FcPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of a port.
unknown(1) - unknown state.
online(2) - port is in online state.
offline(3) - port is in offline state.
testing(4) - port is in testing state.
fault(5) - port is faulty.
other(6) - other state."
SYNTAX INTEGER {
unknown(1),
online(2),
offline(3),
testing(4),
fault(5),
other(6)
}
FcPlatformType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of platform.
unknown(1) - unknown type.
other(2) - other than the listed types.
gateway(3) - platform is a gateway.
converter(4) - platform is a converter.
hostBusAdapter(5) - platform is a Host Bus
Adapter (HBA).
swProxyAgent(6) - platform is a s/w proxy
agent.
storageDevice(7) - platform is a Storage device.
host(8) - platform is a host.
storageSubSys(9) - platform is a storage sub-system
module(10) - platform is a module.
swDriver(11) - platform is a s/w driver.
storageAccessDev(12) - platform is a storage access
device."
SYNTAX INTEGER {
unknown(1),
other(2),
gateway(3),
converter(4),
hostBusAdapter(5),
swProxyAgent(6),
storageDevice(7),
host(8),
storageSubSys(9),
module(10),
swDriver(11),
storageAccessDev(12)
}
FcFcsRejReasonExplanation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reject reason code explanation.
noAdditionalExplanation(1) - no additional expl.
invNameIdForIEOrPort(2) - the format of IE or
port name is invalid.
ieListNotAvailable(3) - IE list is not available.
ieTypeNotAvailable(4) - IE type is not available.
domainIdNotAvailable(5) - Domain ID is not
available.
mgmtIdNotAvailable(6) - mgmt ID is not available.
fabNameNotAvailable(7) - fabric name is not
available.
ielogNameNotAvailable(8) - IE logical name is not
available.
mgmtAddrListNotAvailable(9) - mgmt address list is
not available.
ieInfoListNotAvailable(10) - IE info list is not
available.
portListNotAvailable(11) - port list is not
available.
portTypeNotAvailable(12) - port type is not
available.
phyPortNumNotAvailable(13) - physical port number is
not available.
attPortNameListNotAvailable(14) - attached port name
list is not
available.
portStateNotAvailable(15) - port state is not
available.
unableToRegIELogName(16) - not able to register IE
logical name.
platformNameNoExist(17) - platform name does not
exist.
platformNameAlreadyExists(18) - platform name already
exists.
platformNodeNameNoExists(19) - platform node name does
not exist.
platformNodeNameAlreadyExists(20) - platform node name
already exists."
SYNTAX INTEGER {
noAdditionalExplanation(1),
invNameIdForIEOrPort(2),
ieListNotAvailable(3),
ieTypeNotAvailable(4),
domainIdNotAvailable(5),
mgmtIdNotAvailable(6),
fabNameNotAvailable(7),
ielogNameNotAvailable(8),
mgmtAddrListNotAvailable(9),
ieInfoListNotAvailable(10),
portListNotAvailable(11),
portTypeNotAvailable(12),
phyPortNumNotAvailable(13),
attPortNameListNotAvailable(14),
portStateNotAvailable(15),
unableToRegIELogName(16),
platformNameNoExist(17),
platformNameAlreadyExists(18),
platformNodeNameNoExists(19),
platformNodeNameAlreadyExists(20)
}
fcsVsanDiscoverySpinLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to facilitate modification
of fcsVsanDiscoveryList2k, fcsVsanDiscovery-
List4k, fcsVsanDiscoveryName and
fcsStartDiscovery objects by multiple managers.
The procedure for modifying the above four objects
is as follows:
1. Determine new values for fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName.
2. Retrieve the value of fcsVsanDiscoverySpinLock.
3. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value, and (in the same PDU) the value
of fcsVsanDiscoveryList2k to the new value.
If the set fails for the fcsVsanDiscoverySpinLock
object, go back to step 2.
4. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by one, and (in the
same PDU) the value of fcsVsanDiscoveryList4k
to its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
5. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by two, and (in the
same PDU) the value of fcsStartDiscovery to
'startDiscovery'. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
6. Set the value of fcsVsanDiscoverySpinLock to the
retrieved value incremented by three, and (in the
same PDU) the value of fcsVsanDiscoveryName to
its new value. If the set fails for
fcsVsanDiscoverySpinLock, go back to step 2.
Note that if it's possible to include
fcsVsanDiscoveryList4k, fcsStartDiscovery,
and/or fcsVsanDiscoveryName in the (Set Request)
PDU of an earlier step, then step 4, 5 and/or 6,
respectively , can be eliminated."
::= { fcsConfiguration 1 }
fcsVsanDiscoveryName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the discovery triggered by a manager.
This object is sent along with the
fcsDiscoveryCompleteNotify notification.
This object cannot be modified when the discovery
status is 'inProgress' on the selected set of
VSANs as indicated by the fcsDiscoveryStatus
object in the fcsDiscoveryStatusTable."
::= { fcsConfiguration 2 }
fcsVsanDiscoveryList2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A bitmap which represents VSANs starting from
VSAN id 1 to VSAN id 2048. Discovery will be
carried out on all those VSANs for which the
corresponding bits are set to 1 in this object.
Note that if multiple managers set this object
one after the other, the discovery is carried
out on the union of the multiple requests. When
read, the value of this object is the union of
the in-progress discovery requests."
::= { fcsConfiguration 3 }
fcsVsanDiscoveryList4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A bitmap which represents VSANs starting from
VSAN id 2049 to VSAN id 4096. Discovery will be
carried out on all those VSANs for which the
corresponding bits are set to 1 in this object.
Note that if multiple managers set this object
one after the other, the discovery is carried
out on the union of the multiple requests. When
read, the value of this object is the union of
the in-progress discovery requests."
::= { fcsConfiguration 4 }
fcsStartDiscovery OBJECT-TYPE
SYNTAX INTEGER {
startDiscovery(1), -- start the discovery
noOp(2) -- no operation
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a discovery cycle
should be started by the Fabric Configuration
Server. If this object is set to 'startDiscovery',
then the discovery is started by the Fabric
Configuration Server on those VSANs that have been
specified by the fcsVsanDiscoveryList objects.
No action is taken if this object is set to 'noOp'.
The value of this object when read is always
'noOp'."
::= { fcsConfiguration 5 }
fcsDiscoveryStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsDiscoveryStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the status of the discovery
for all VSANs."
::= { fcsConfiguration 6 }
fcsDiscoveryStatusEntry OBJECT-TYPE
SYNTAX FcsDiscoveryStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
The discovery status for a particular VSAN."
INDEX { vsanIndex }
::= { fcsDiscoveryStatusTable 1 }
FcsDiscoveryStatusEntry ::= SEQUENCE {
fcsDiscoveryStatus INTEGER,
fcsDiscoveryCompleteTime TimeStamp
}
fcsDiscoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1), -- discovery in progress
completed(2), -- discovery is complete
databaseInvalid(3) -- database is invalid
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the discovery on the local switch.
Initially when the switch comes up, this object
will be set to 'databaseInvalid' state on all
VSANs. This indicates that a discovery needs to
be done.
If the manager sets the fcsStartDiscovery object to
'startDiscovery' for this VSAN, then the discovery
will be triggered on.
The state of this object will be set to 'inProgress'
for this VSAN during the discovery. Once the
discovery is completed on this VSAN, this object
will be set to 'completed'.
After the discovery is completed for the specified
list of VSANs, the data is cached for an interval
of time specified by fcsVsanDiscoveryTimeOut object.
Once this interval of time expires, the data is lost
and this object will be set to 'databaseInvalid'
state for the specified list of VSANs."
::= { fcsDiscoveryStatusEntry 1 }
fcsDiscoveryCompleteTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime when
the last discovery was completed on this VSAN.
This object will contain the value of zero before
the first discovery on this VSAN."
::= { fcsDiscoveryStatusEntry 2 }
fcsVsanDiscoveryTimeOut OBJECT-TYPE
SYNTAX TimeIntervalSec (300..1800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum interval of time for which the
discovered data on a VSAN is cached by the
Fabric Configuration Server."
DEFVAL { 900 }
::= { fcsConfiguration 7 }
fcsDiscoveryInvalidateCache2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A bitmap which represents VSANs from 1 to 2048.
The discovered cache will be invalidated on those
VSANs for which the corresponding bits are set to
1 in this object. If the bit corresponding to a
particular VSAN is set to 1 and if the value of
fcsDiscoveryStatus for that VSAN is 'completed',
then the discovery cache on that VSAN will be
invalidated and the fcsDiscoveryStatus object for
that VSAN will be set to 'databaseInvalid'."
::= { fcsConfiguration 8 }
fcsDiscoveryInvalidateCache4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A bitmap which represents VSANs from 2049 to 4096.
The discovered cache will be invalidated on those
VSANs for which the corresponding bits are set to
1 in this object. If the bit corresponding to a
particular VSAN is set to 1 and if the value of
fcsDiscoveryStatus for that VSAN is 'completed',
then the discovery cache on that VSAN will be
invalidated and the fcsDiscoveryStatus object for
that VSAN will be set to 'databaseInvalid'."
::= { fcsConfiguration 9 }
fcsIeNumber OBJECT-TYPE
SYNTAX Integer32 (0..489472)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries currently present in the
fcsIeTable."
::= { fcsConfiguration 10 }
fcsIeTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsIeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Interconnect Elements.
Interconnect Elements (IEs) are switches, hubs,
bridges etc.
By default, the Fabric Configuration Server will
maintain detailed information pertaining only to
the local switch. As far as remote topology is
concerned, only the IE name, type and domain-id
information will be maintained. If a discovery
cycle is triggered on a set of VSANs, this table
along with the Port and Platform tables will be
populated with the discovered information. The
discovered data will be retained in this table for
at least fcsVsanDiscoveryTimeOut seconds after the
completion of its discovery or till the discovered
data is invalidated by setting the appropriate
bits of fcsDiscoveryInvalidateCache2k/4k."
::= { fcsConfiguration 11 }
fcsIeEntry OBJECT-TYPE
SYNTAX FcsIeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (coneptual row) in this table.
It gives information on an Interconnect
Element."
INDEX { vsanIndex, fcsIeName }
::= { fcsIeTable 1 }
FcsIeEntry ::= SEQUENCE {
fcsIeName FcNameId,
fcsIeType FcIeType,
fcsIeDomainId DomainIdOrZero,
fcsIeMgmtId FcAddressId,
fcsIeFabricName FcNameId,
fcsIeLogicalName OCTET STRING,
fcsIeMgmtAddrListIndex ListIndexOrZero,
fcsIeInfoList OCTET STRING,
fcsIePortListIndex ListIndexOrZero
}
fcsIeName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WWN of an Interconnect Element. This object
uniquely identifies an Interconnect Element on a
VSAN. If the IE is a switch, then this object
is the Node WWN of the switch."
::= { fcsIeEntry 1 }
fcsIeType OBJECT-TYPE
SYNTAX FcIeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this Interconnect Element."
::= { fcsIeEntry 2 }
fcsIeDomainId OBJECT-TYPE
SYNTAX DomainIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Domain Id of this Interconnect Element.
If the Domain Id has not been configured,
then this object will have the value of zero."
::= { fcsIeEntry 3 }
fcsIeMgmtId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management identifer of this Interconnect
Element. If the Interconnect Element is a switch,
then this object will be the Domain Controller
identifier of the switch. If the value of this
object is unknown to the local system, then it
will contain the null value x'00 00 00'."
DEFVAL { '000000'h }
::= { fcsIeEntry 4 }
fcsIeFabricName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fabric name of this Interconnect Element.
If the value of this object is unknown to the
local system, then it will contain the null
value x'00 00 00 00 00 00 00 00'."
DEFVAL { '0000000000000000'h }
::= { fcsIeEntry 5 }
fcsIeLogicalName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical name of this Interconnect Element.
If the value of this object is unknown to the
local system, then it will contain the zero
length string."
::= { fcsIeEntry 6 }
fcsIeMgmtAddrListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the management address list
corresponding to this Interconnect Element. This
object is an index into the fcsMgmtAddrListTable.
Zero or more of the management address objects may
be associated with an Interconnect Element object."
::= { fcsIeEntry 7 }
fcsIeInfoList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information list corresponding to this
Interconnect Element. This object contains
multiple substrings: the vendor name,
model name/number, release code and any vendor
specific information. Each substring is
terminated with a null x'00'."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.1.8"
::= { fcsIeEntry 8 }
fcsIePortListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port list corresponding to this
Interconnect Element. This object is an index into
the fcsPortListTable."
::= { fcsIeEntry 9 }
fcsMgmtAddrListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsMgmtAddrListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of management
address lists currently referenced by any
instance of the fcsIeMgmtAddrListIndex or
fcsPlatformMgmtAddrListIndex objects."
::= { fcsConfiguration 12 }
fcsMgmtAddrListEntry OBJECT-TYPE
SYNTAX FcsMgmtAddrListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
A management address is represented by
fcsMgmtAddrIndex. All management addresses which
belong to the same list have a common
fcsMgmtAddrListIndex."
INDEX { fcsMgmtAddrListIndex, fcsMgmtAddrIndex }
::= { fcsMgmtAddrListTable 1 }
FcsMgmtAddrListEntry ::= SEQUENCE {
fcsMgmtAddrListIndex ListIndex,
fcsMgmtAddrIndex Unsigned32,
fcsMgmtAddr OCTET STRING,
fcsMgmtAddrConfigSource CreatedBy,
fcsMgmtAddrRowStatus RowStatus
}
fcsMgmtAddrListIndex OBJECT-TYPE
SYNTAX ListIndex (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the management address list."
::= { fcsMgmtAddrListEntry 1 }
fcsMgmtAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a management address."
::= { fcsMgmtAddrListEntry 2 }
fcsMgmtAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The management address corresponding to this entry.
The format of this object may be based on the
format of the Uniform Resource Locator (URL).
For example, SNMP - snmp://ipaddress[:port#].
This object MUST be set to a valid value before or
concurrently with setting the value of the
corresponding instance of fcsMgmtAddrRowStatus to
'active'."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.1.7"
::= { fcsMgmtAddrListEntry 3 }
fcsMgmtAddrConfigSource OBJECT-TYPE
SYNTAX CreatedBy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of configuration of this entry.
Note that an entry which is configured via
GS3 cannot be deleted through SNMP."
::= { fcsMgmtAddrListEntry 4 }
fcsMgmtAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { fcsMgmtAddrListEntry 5 }
fcsPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of ports that
are associated with Interconnect Elements contained
in fcsIeTable."
::= { fcsConfiguration 13 }
fcsPortListEntry OBJECT-TYPE
SYNTAX FcsPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
A port is represented by fcsPortName. All the
ports that belong to the same list have the same
fcsPortListIndex."
INDEX { fcsPortListIndex, fcsPortName }
::= { fcsPortListTable 1 }
FcsPortListEntry ::= SEQUENCE {
fcsPortListIndex ListIndex
}
fcsPortListIndex OBJECT-TYPE
SYNTAX ListIndex (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port list."
::= { fcsPortListEntry 1 }
fcsPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries currently present in the
fcsPortTable."
::= { fcsConfiguration 14 }
fcsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information of all the ports.
These ports are grouped into lists by the
fcsPortListTable."
::= { fcsConfiguration 15 }
fcsPortEntry OBJECT-TYPE
SYNTAX FcsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table."
INDEX { vsanIndex, fcsPortName }
::= { fcsPortTable 1 }
FcsPortEntry ::= SEQUENCE {
fcsPortName FcNameId,
fcsPortType FcPortTypes,
fcsPortTXType FcPortTxTypes,
fcsPortModuleType FcPortModuleTypes,
fcsPortPhyPortNum Integer32,
fcsPortAttachPortNameIndex ListIndexOrZero,
fcsPortState FcPortState
}
fcsPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WWN of the port for which this row contains
information."
::= { fcsPortEntry 1 }
fcsPortType OBJECT-TYPE
SYNTAX FcPortTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this port.
If it is a trunk port, the type of the port will
be tePort. This is however not a standard port
type. When information regarding such a port is
sent using GS-3, it is represented in the GS-3
message and therefore in this table as an
E_Port."
::= { fcsPortEntry 2 }
fcsPortTXType OBJECT-TYPE
SYNTAX FcPortTxTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TX type of this port."
::= { fcsPortEntry 3 }
fcsPortModuleType OBJECT-TYPE
SYNTAX FcPortModuleTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module type of this port."
::= { fcsPortEntry 4 }
fcsPortPhyPortNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical number corresponding to this port
entry."
::= { fcsPortEntry 5 }
fcsPortAttachPortNameIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the attached port name list
corresponding to this port entry. This object
is an index into the fcsAttachPortNameListTable."
::= { fcsPortEntry 6 }
fcsPortState OBJECT-TYPE
SYNTAX FcPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this port."
::= { fcsPortEntry 7 }
fcsAttachPortNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of attach port
names."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.2.6"
::= { fcsConfiguration 16 }
fcsAttachPortNameListEntry OBJECT-TYPE
SYNTAX FcsAttachPortNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
An Attached port name is represented by
fcsAttachPortName. All the attach port names
that belong to the same list have a common
fcsAttachPortNameListIndex."
INDEX { fcsAttachPortNameListIndex, fcsAttachPortName }
::= { fcsAttachPortNameListTable 1 }
FcsAttachPortNameListEntry ::= SEQUENCE {
fcsAttachPortNameListIndex ListIndex,
fcsAttachPortName OCTET STRING
}
fcsAttachPortNameListIndex OBJECT-TYPE
SYNTAX ListIndex(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the attach port name list."
::= { fcsAttachPortNameListEntry 1 }
fcsAttachPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attached port name corresponding to this entry.
Zero or more of these names may be associated with
a port object.
The first 8 bytes of this object contain the WWN of
the port followed by 2 reserved bytes. Following
this is one byte of Port flags and one byte of
Port type. See FC-GS3 for more details."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.2.6"
::= { fcsAttachPortNameListEntry 2 }
fcsPlatformNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries currently present in the
fcsPlatformTable."
::= { fcsConfiguration 17 }
fcsPlatformTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsPlatformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on platforms.
By default, this table only contains information
pertaining to the local switch. If a discovery
is triggered, this table will contain all the
information that was obtained from the discovery
process. The information gathered from the
discovery process shall be retained in this table
for atleast fcsVsanDiscoveryTimeOut seconds after
the completion of its discovery or until the
discovered cache is invalidated by setting the
appropriate bits of
fcsDiscoveryInvalidateCache2k/4k."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.3"
::= { fcsConfiguration 18 }
fcsPlatformEntry OBJECT-TYPE
SYNTAX FcsPlatformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
A platform is uniquely represented by
fcsPlatformIndex. There could be multiple
platforms on a VSAN.
A platform can contain multiple nodes. The
node lists need to be created in the
fcsNodeNameListTable. The
fcsPlatformNodeNameListIndex object in this
table points to the desired node list in the
fcsNodeNameListTable.
Similarly, the management addresses corresponding
to the platform need to be created in the
fcsMgmtAddrListTable. The
fcsPlatformMgmtAddrListIndex object in this table
points to the desired management address list
in the fcsMgmtAddrListTable.
Once a platform has been created, it can optionally
be validated on a fabric-wide basis by setting
the appropriate instance of fcsPlatformValidation
object to 'validate'."
INDEX { vsanIndex, fcsPlatformIndex }
::= { fcsPlatformTable 1 }
FcsPlatformEntry ::= SEQUENCE {
fcsPlatformIndex Unsigned32,
fcsPlatformName OCTET STRING,
fcsPlatformType FcPlatformType,
fcsPlatformNodeNameListIndex ListIndexOrZero,
fcsPlatformMgmtAddrListIndex ListIndexOrZero,
fcsPlatformConfigSource CreatedBy,
fcsPlatformValidation INTEGER,
fcsPlatformValidationResult INTEGER,
fcsPlatformRowStatus RowStatus
}
fcsPlatformIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this platform."
::= { fcsPlatformEntry 1 }
fcsPlatformName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of this platform.
The name should be unique within a VSAN. This
object cannot be modified while the value of
the corresponding instance of
fcsPlatformRowStatus is 'active'.
This object MUST be set before or concurrently
with setting the corresponding instance of
fcsPlatformRowStatus to 'active'."
REFERENCE
"ANSI NCITS xxx-200x, Fibre Channel - Generic
Services 3 (FC-GS-3) T11/Project 1356D/Rev 7.01
Section 6.1.2.3.1"
::= { fcsPlatformEntry 2 }
fcsPlatformType OBJECT-TYPE
SYNTAX FcPlatformType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of this platform."
::= { fcsPlatformEntry 3 }
fcsPlatformNodeNameListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the node name list corresponding to
this platform entry. This object is an index into
the fcsNodeNameListTable.
The list of nodes that a platform contains should
be unique within a VSAN.
If this entry is configured via SNMP as indicated
by the corresponding instance of fcsPlatformConfig-
Source object, then this object should only point
to entries in fcsNodeNameListTable that have been
created via SNMP. Similarly, if this entry is
configured via GS-3, then it can only point to
entries configured via GS-3 in the
fcsNodeNameListTable."
::= { fcsPlatformEntry 4 }
fcsPlatformMgmtAddrListIndex OBJECT-TYPE
SYNTAX ListIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the management address list
corresponding to this Platform. This object
is an index into the fcsMgmtAddrListTable.
Zero or more of the management address objects may
be associated with a Platform object.
If this entry is configured via SNMP as indicated
by the corresponding instance of fcsPlatformConfig-
Source object, then this object should only point
to entries in fcsMgmtAddrListTable that have been
created via SNMP. Similarly, if this entry is
configured via GS-3, then it can only point to
entries configured via GS-3 in the
fcsMgmtAddrListTable."
::= { fcsPlatformEntry 5 }
fcsPlatformConfigSource OBJECT-TYPE
SYNTAX CreatedBy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of configuration of this entry.
Note that an entry which is configured via
GS3 cannot be deleted through SNMP."
::= { fcsPlatformEntry 6 }
fcsPlatformValidation OBJECT-TYPE
SYNTAX INTEGER {
validate(1), -- perform validation
noop(2) -- no operation
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the validation for
the platform name and its constituent nodes
should be done on a fabric-wide basis.
The outcome of this validation will be present
in the corresponding instance of
fcsPlatformValidationResult.
No action is taken if this object is set to
'noop'.
The value of this object when read is always
'noop'."
::= { fcsPlatformEntry 7 }
fcsPlatformValidationResult OBJECT-TYPE
SYNTAX INTEGER {
success(1), -- validation succeeded
inProgress(2), -- validation in progress
nameInvalid(3), -- Platform Name invalid
nodeInvalid(4), -- Platform Node invalid
failure(5) -- general failure
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the fabric-wide validation of
this platform.
If the name of the platform is not unique
fabric-wide on this VSAN, then this object
will contain the value 'nameInvalid'.
If the list of nodes present in the platform
is not unique, then this object will contain
the value 'nodeInvalid'.
If there is any other failure, this object will
contain the value 'failure'.
None of the configurable objects can be modified
when the value of this object is 'inProgress'."
::= { fcsPlatformEntry 8 }
fcsPlatformRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { fcsPlatformEntry 9 }
fcsNodeNameListTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the lists of nodes."
::= { fcsConfiguration 19 }
fcsNodeNameListEntry OBJECT-TYPE
SYNTAX FcsNodeNameListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
Each node is represented uniquely by
fcsNodeName. All nodes that belong to the
same list have a common fcsNodeNameListIndex."
INDEX { fcsNodeNameListIndex, fcsNodeName }
::= { fcsNodeNameListTable 1 }
FcsNodeNameListEntry ::= SEQUENCE {
fcsNodeNameListIndex ListIndex,
fcsNodeName FcNameId,
fcsNodeNameConfigSource CreatedBy,
fcsNodeNameRowStatus RowStatus
}
fcsNodeNameListIndex OBJECT-TYPE
SYNTAX ListIndex (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the node name list."
::= { fcsNodeNameListEntry 1 }
fcsNodeName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of this node entry."
::= { fcsNodeNameListEntry 2 }
fcsNodeNameConfigSource OBJECT-TYPE
SYNTAX CreatedBy
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of configuration of this entry.
Note that an entry configured via GS-3
cannot be deleted through SNMP."
::= { fcsNodeNameListEntry 3 }
fcsNodeNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { fcsNodeNameListEntry 4 }
fcsTotalRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests rejected by the
local switch across all VSANs."
::= { fcsStats 1 }
fcsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all the statistics related
to the Fabric Configuration Server."
::= { fcsStats 2 }
fcsStatsEntry OBJECT-TYPE
SYNTAX FcsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
Some statistics for a particular VSAN."
INDEX { vsanIndex }
::= { fcsStatsTable 1 }
FcsStatsEntry ::= SEQUENCE {
fcsRxGetReqs Counter32,
fcsTxGetReqs Counter32,
fcsRxRegReqs Counter32,
fcsTxRegReqs Counter32,
fcsRxDeregReqs Counter32,
fcsTxDeregReqs Counter32,
fcsTxRscns Counter32,
fcsRxRscns Counter32,
fcsRejects Counter32
}
fcsRxGetReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Get Requests received by the Fabric
Configuration Server on this VSAN."
::= { fcsStatsEntry 1 }
fcsTxGetReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Get Requests sent by the Fabric
Configuration Server on this VSAN to other
servers in the fabric."
::= { fcsStatsEntry 2 }
fcsRxRegReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Registration Requests received by the
Fabric Configuration Server on this VSAN."
::= { fcsStatsEntry 3 }
fcsTxRegReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Registration Requests sent by the
Fabric Configuration Server on this VSAN."
::= { fcsStatsEntry 4 }
fcsRxDeregReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Deregistration Requests received by
the Fabric Configuration Server on this VSAN."
::= { fcsStatsEntry 5 }
fcsTxDeregReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Deregistration Requests sent by
the Fabric Configuration Server on this VSAN."
::= { fcsStatsEntry 6 }
fcsTxRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Registered State Change
Notifications (RSCNs) sent by the Fabric
Configuration Server on this VSAN."
::= { fcsStatsEntry 7 }
fcsRxRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Registered State Change
Notifications (RSCNs) received by the Fabric
Configuration Server on this VSAN."
::= { fcsStatsEntry 8 }
fcsRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests rejected by the local
switch on this VSAN."
::= { fcsStatsEntry 9 }
-- Notification information.
fcsRejReasonCode OBJECT-TYPE
SYNTAX FcGs3RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the reason code corresponding
to the latest Fabric Configuration Server request
rejected by the local system."
::= { fcsInformation 1 }
fcsRejReasonCodeExplanation OBJECT-TYPE
SYNTAX FcFcsRejReasonExplanation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the reason code explanation
if the reason code is 'Unable to perform command
req'. This object also corresponds to the latest
Fabric Configuration Server request rejected by
the local system."
::= { fcsInformation 2 }
fcsMgmtAddrChangeVsanIndex OBJECT-TYPE
SYNTAX VsanIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the VSAN id on which a management
address change has been detected."
::= { fcsInformation 3 }
fcsMgmtAddrChangeIeName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the IE for which a management address
change has been detected."
::= { fcsInformation 4 }
-- Notification control objects
fcsReqRejNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the Fabric Configuration
Server should issue a 'fcsReqRejNotify'
notification.
If the value of this object is 'true', then the
notification is issued. If the value of this
object is 'false', then the notification is not
issued."
DEFVAL { false }
::= { fcsConfiguration 20 }
fcsDiscoveryCompleteNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the Fabric Configuration
Server should issue a 'fcsDiscoveryCompleteNotify'
notification.
If the value of this object is 'true', then the
notification is issued. If the value of this
object is 'false', then the notification is not
issued."
DEFVAL { false }
::= { fcsConfiguration 21 }
-- Notifications
fcsReqRejNotify NOTIFICATION-TYPE
OBJECTS {fcsRejReasonCode,
fcsRejReasonCodeExplanation}
STATUS current
DESCRIPTION
"This notification is generated by the Fabric
Configuration Server on this switch whenever it
rejects a Fabric Configuration Server request.
The Fabric Configuration Server should update the
fcsRejReasonCode and fcsRejReasonCodeExplanation
objects with the corresponding reason code and
reason code explanation before sending the
notification."
::= { fcsNotifications 1 }
fcsDiscoveryCompleteNotify NOTIFICATION-TYPE
OBJECTS {fcsVsanDiscoveryName}
STATUS current
DESCRIPTION
"This notification is generated by the Fabric
Configuration Server when a discovery cycle
specified by fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k and fcsVsanDiscoveryName
is completed."
::= { fcsNotifications 2 }
fcsMgmtAddrChangeNotify NOTIFICATION-TYPE
OBJECTS { fcsMgmtAddrChangeVsanIndex,
fcsMgmtAddrChangeIeName }
STATUS current
DESCRIPTION
"This notification is generated by the Fabric
Configuration Server whenever the management
address of a IE changes. This means that, this
notification is generated whenever an entry in
the fcsMgmtAddrListTable changes."
::= { fcsNotifications 3 }
-- Conformance
fcsMIBCompliances OBJECT IDENTIFIER ::= { fcsMIBConformance 1 }
fcsMIBGroups OBJECT IDENTIFIER ::= { fcsMIBConformance 2 }
fcsMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
-- superceded by fcsMIBComplianceRev1
DESCRIPTION
"The compliance statement for entities which
implement the Fabric Configuration Server."
MODULE MANDATORY-GROUPS {fcsConfigurationGroup,
fcsStatisticsGroup,
fcsNotificationControlGroup,
fcsNotificationGroup}
OBJECT fcsMgmtAddrRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT fcsPlatformRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT fcsNodeNameRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
::= { fcsMIBCompliances 1 }
fcsMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the Fabric Configuration Server."
MODULE MANDATORY-GROUPS {fcsConfigurationGroup,
fcsStatisticsGroup,
fcsNotificationControlGroupRev1,
fcsNotificationGroupRev1}
OBJECT fcsMgmtAddrRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT fcsPlatformRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
OBJECT fcsNodeNameRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
MIN-ACCESS read-create
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."
::= { fcsMIBCompliances 2 }
-- Units of Conformance
fcsConfigurationGroup OBJECT-GROUP
OBJECTS {fcsVsanDiscoverySpinLock,
fcsVsanDiscoveryName,
fcsVsanDiscoveryList2k,
fcsVsanDiscoveryList4k,
fcsStartDiscovery,
fcsDiscoveryStatus,
fcsDiscoveryCompleteTime,
fcsVsanDiscoveryTimeOut,
fcsDiscoveryInvalidateCache2k,
fcsDiscoveryInvalidateCache4k,
fcsIeNumber,
fcsIeType,
fcsIeDomainId,
fcsIeMgmtId,
fcsIeFabricName,
fcsIeLogicalName,
fcsIeMgmtAddrListIndex,
fcsIeInfoList,
fcsIePortListIndex,
fcsMgmtAddr,
fcsMgmtAddrConfigSource,
fcsMgmtAddrRowStatus,
fcsPortListIndex,
fcsPortNumber,
fcsPortType,
fcsPortTXType,
fcsPortModuleType,
fcsPortPhyPortNum,
fcsPortAttachPortNameIndex,
fcsPortState,
fcsAttachPortName,
fcsPlatformNumber,
fcsPlatformName,
fcsPlatformType,
fcsPlatformNodeNameListIndex,
fcsPlatformMgmtAddrListIndex,
fcsPlatformConfigSource,
fcsPlatformValidation,
fcsPlatformValidationResult,
fcsPlatformRowStatus,
fcsNodeNameConfigSource,
fcsNodeNameRowStatus}
STATUS current
DESCRIPTION
"A collection of objects for displaying and configuring
Fabric Configuration Server parameters."
::= { fcsMIBGroups 1 }
fcsStatisticsGroup OBJECT-GROUP
OBJECTS {fcsTotalRejects,
fcsRxGetReqs,
fcsTxGetReqs,
fcsRxRegReqs,
fcsTxRegReqs,
fcsRxDeregReqs,
fcsTxDeregReqs,
fcsTxRscns,
fcsRxRscns,
fcsRejects}
STATUS current
DESCRIPTION
"A collection of objects for displaying the Fabric
Configuration Server statistics information."
::= { fcsMIBGroups 2 }
fcsNotificationControlGroup OBJECT-GROUP
OBJECTS {fcsReqRejNotifyEnable,
fcsRejReasonCode,
fcsRejReasonCodeExplanation,
fcsDiscoveryCompleteNotifyEnable}
STATUS deprecated
DESCRIPTION
"A collection of notification control and
notification information objects for monitoring
Fabric Configuration Server request
rejection and discovery of remote toplogy
information."
::= { fcsMIBGroups 3 }
fcsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {fcsReqRejNotify,
fcsDiscoveryCompleteNotify}
STATUS deprecated
DESCRIPTION
"A collection of notifications for monitoring
Fabric Configuration Server request
rejection and discovery of remote toplogy
information."
::= { fcsMIBGroups 4 }
fcsNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {fcsReqRejNotify,
fcsDiscoveryCompleteNotify,
fcsMgmtAddrChangeNotify}
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
Fabric Configuration Server request
rejection, discovery of remote toplogy
information and management address changes."
::= { fcsMIBGroups 5 }
fcsNotificationControlGroupRev1 OBJECT-GROUP
OBJECTS {fcsReqRejNotifyEnable,
fcsRejReasonCode,
fcsRejReasonCodeExplanation,
fcsDiscoveryCompleteNotifyEnable,
fcsMgmtAddrChangeVsanIndex,
fcsMgmtAddrChangeIeName}
STATUS current
DESCRIPTION
"A collection of notification control and
notification information objects for monitoring
Fabric Configuration Server request
rejection and discovery of remote toplogy
information."
::= { fcsMIBGroups 6 }
END
Reference in New Issue View Git Blame Copy Permalink