MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-FC-FE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

5938 lines
216 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-FC-FE-MIB.my: Cisco Fibre Channel Fibre Element MIB
--
-- September 2002, Srini Kode
--
-- Copyright (c) 2002-2010 by cisco Systems Inc.
-- All rights reserved.
--
-- *******************************************************************
CISCO-FC-FE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Counter64,
Integer32,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ifIndex,
InterfaceIndexOrZero
FROM IF-MIB
entPhysicalIndex
FROM ENTITY-MIB
MicroSeconds
FROM CISCO-TC
FcNameId,
FcAddressId,
FcClassOfServices,
FcPortTypes,
FcPortTxTypes,
FcIfSpeed,
FcPortModuleTypes,
FcIfServiceStateType
FROM CISCO-ST-TC
vsanIndex
FROM CISCO-VSAN-MIB
FcList
FROM CISCO-ZS-MIB
cieIfOperStatusCause
FROM CISCO-IF-EXTENSION-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoFcFeMIB MODULE-IDENTITY
LAST-UPDATED "201008180900Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"This is the Cisco fibre element management MIB module.
It covers:
- Cisco extension to the interface MIB ( IF-MIB )
- Contains all the groups from FIBRE-CHANNEL-FE-MIB
relevant to Cisco fabric.
- Other features specific to Cisco fabric.
This MIB supports all the port types defined by the
textual convention FcPortTypes. In addition it also
supports Nx_port, where Nx_port can be either N_port or
NL_port. The FC standards define Interconnect_Ports
to be E_ports or B_Ports.
This MIB supports Port Channel ports. Port
Channel port is a single logical port, which contains
multiple physical ports as its members. Presently only
E_ports can be a member of Port Channel port.
In addition it provides GigE and port channel information
for all the Gigabit Ethernet (GigE) ports in the fabric.
Terminology
ELP : Exchange Link parameters
EPP : Exchange Peer Parameters."
REVISION "201008180900Z"
DESCRIPTION
"-Added the following objects to FcIfErrorEntry:
fcIfTimeOutDiscards,
fcIfOutDiscards,
fcIfCreditLoss,
fcIfTxWtAvgBBCreditTransitionToZero.
-Added the following object to FcIfGigEEntry:
fcIfGigConnectorType.
-Added the following new groups:
fcIfGigEinfoExtGroupRev1
fcIfErrorGroupRev2
-Deprecated cffFcFeMIBComplianceRev11 compliance statement.
-Added cffFcFeMIBComplianceRev12 compliance statement."
REVISION "201003040900Z"
DESCRIPTION
"-Added the following enums for FcIfOperStatusReason:
ipQosMgrPolicyAppFailure,
pauseRateLimitErrDisabled,
lstGrpUplinkDown,
stickyDnLinkFailure,
routerMacFailure,
dcxMultipleMsapIds,
dcxHundredPdusRcvdNoAck,
enmSatIncompatibleUplink,
enmLoopDetected,
nonStickyExternallyDisabled,
subGroupIdNotAssigned,
vemUnlicensed,
profileNotFound,
nonExistentVlan,
vlanInvalidType,
vlanDown,
vpcPeerUpgrade,
ipQosDcbxpCompatFailure,
nonCiscoHbaVfTag,
domainIdConfigMismatch and
sfpSpeedMismatch."
REVISION "200905130900Z"
DESCRIPTION
"-Added the following enums for FcIfOperStatusReason:
portDisabled,
tunnelModeNotConfigured,
tunnelSrcNotConfigured,
tunnelDstNotConfigured,
tunnelUnableToResolveSrcIP
tunnelUnableToResolveDstIP,
tunnelVrfDown,
sifAdminDown,
phyIntfDown,
ifSifLimitExceeded,
sifHoldDown,
noFcoe,
dcxCompatMismatch,
isolateBundleLimitExceeded,
sifNotBound,
errDisabledLacpMiscfg,
satFabricIfDown,
invalidSatFabricIf,
noRemoteChassis,
vicEnableNotReceived,
vicDisableReceived,
vlanVsanMappingNotEnabled,
stpNotFwdingInFcoeMappedVlan,
moduleOffline,
udldAggModeLinkFailure,
stpInconsVpcPeerDisabled,
setPortStateFailed,
suspendedByVpc,
vpcCfgInProgress,
vpcPeerLinkDown,
vpcNoRspFromPeer,
protoPortSuspend,
tunnelSrcDown,
cdpInfoUnavailable,
fexSfpInvalid,
errDisabledIpConflict,
fcotClkRateMismatch,
portGuardTrustSecViolation,
sdpTimeout,
satIncompatTopo,
waitForFlogi,
satNotConfigured,
npivNotEnabledInUpstream,
vsanMismatchWithUpstreamSwPort,
portGuardBitErrRate,
portGuardSigLoss,
portGuardSyncLoss,
portGuardLinkReset and
portGuardCreditLoss.
-Added the following new enums to
fcIfFlapCtrlConfigReason:
bitErrorRate,
signalLoss,
syncLoss,
linkReset and
creditLoss."
REVISION "200902050900Z"
DESCRIPTION
"-Added new object fcIfModuleXcvrFrequencyConfig to
fcIfModuleTable.
-Deprecated fcIfToggleCtrlConfigTable
-Added fcIfFlapCtrlConfigTable
-Deprecated fcIfModuleGroup
-Added the following new groups:
fcIfFlapCtrlConfigGroup
fcIfModuleGroupRev1
-Deprecated cffFcFeMIBComplianceRev10 compliance statement.
-Added cffFcFeMIBComplianceRev11 compliance statement."
REVISION "200812030900Z"
DESCRIPTION
"-Added the following enums for FcIfOperStatusReason:
sfpReadError,
stickyDownOnLinkFailure,
tooManyLinkFlapsErr,
unidirectionalUDLD,
txRxLoopUDLD,
neighborMismatchUDLD,
authzPending,
hotStdbyInBundle,
incompleteConfig,
incompleteTunnelCfg,
hwProgrammingFailed,
tunnelDstUnreachable,
suspendByMtu,
sfpInvalid,
sfpAbsent,
portCapabilitiesUnknown,
channelErrDisabled,
vrfMismatch,
vrfForwardReferencing,
dupTunnelConfigDetected,
primaryVLANDown,
vrfUnusable,
errDisableHandShkFailure,
errDisabledBPDUGuard,
dot1xSecViolationErrDisabled,
emptyEchoUDLD and
vfTaggingCapErr.
-Added fcIfToggleCtrlConfigTable.
Deprecated cffFcFeMIBComplianceRev8 compliance statement.
Deprecated cffFcFeMIBComplianceRev9 compliance statement.
Added cffFcFeMIBComplianceRev10 compliance statement."
REVISION "200708020000Z"
DESCRIPTION
"-Added the following enums for FcIfOperStatusReason:
unavailableNPVUpstreamPort
unavailableNPVPrefUpstreamPort."
REVISION "200701180000Z"
DESCRIPTION
"-Added new object fcIfModuleBandwidthFairnessOper to
fcIfModuleTable."
REVISION "200701090000Z"
DESCRIPTION
"-Added new object fcIfModuleBandwidthFairnessConfig to
fcIfModuleTable.
-Added the following enums for FcIfOperStatusReason:
fcidAllocationFailed,
externallyDisabled."
REVISION "200611260000Z"
DESCRIPTION
"-Added fcIfModuleTable.
-Added following objects to fcIfCapTable:
fcIfIsServiceStateCapable
fcIfIsPortRateModeCapable
fcIfIsAdminRxBbCreditExtendedCapable
-Added following objects to fcIfTable:
fcIfPortType
-Added the following enums for FcIfOperStatusReason:
fcRedirectIsolation,
portActLicenseNotAvailable,
sdmIsolation.
-Added the following OBJECT-GROUPS:
fcIfCapableGroup
fcIfInfoPortGroup
fcIfModuleGroup
-Added cffFcFeMIBComplianceRev9 MODULE-COMPLIANCE."
REVISION "200605100000Z"
DESCRIPTION
"Added new object fcIfAdminBbScnMode to fcIfTable.
fcIfBbScnGroup OBJECT-GROUP added.
cffFcFeMIBComplianceRev8 MODULE-COMPLIANCE added."
REVISION "200604130000Z"
DESCRIPTION
"Added the following enums to FcIfOperStatusReason:
localRcf,
twoSwitchesWithSameWWN,
invalidOtherSidePrincEFPReqRecd,
domainOther."
REVISION "200602200000Z"
DESCRIPTION
"- Added the following objects to fcIfTable:
fcIfServiceState,
fcIfFcTunnelIfIndex and
fcIfAdminRxBbCreditExtended.
- Updated the description of the following objects:
fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx and
fcIfOperRxBbCredit.
- Changed the enums for object fcIfPortRateMode from
'frm' to 'dedicated' and 'osm' to 'shared'.
- Added the following objects to FcIfGigEEntry:
fcIfGigEAutoNegotiate,
fcIfGigEBeaconMode.
- Added the following enums to FcIfOperStatusReason:
portBringupIsolation,
domainNotAllowedIsolated,
virtualIvrDomainOverlapIsolation,
outOfService,
portAuthFailed,
bundleStandby,
portConnectorTypeErr,
errorDisabledReInitLimitReached,
ficonDupPortNum."
REVISION "200502150000Z"
DESCRIPTION
"In FcIfOperStatusReason, corrected typo.
isolatedBundel changed to isolatedBundle."
REVISION "200410190000Z"
DESCRIPTION
"Added new table 'fcIfGigETable' to provide the port
channel information for the Gigabit Ethernet (GigE)
interfaces in the fibre channel switch.
Added two new notifications 'fcotInserted' and
'fcotRemoved'.
Added new enums to FcIfOperStatusReason."
REVISION "200403300000Z"
DESCRIPTION
"Added new object fcIfPortInitStatus to fcIfTable.
Added new enums to FcIfOperStatusReason.
Added fcIfRNIDInfoTable."
REVISION "200311140000Z"
DESCRIPTION
"Added new enums to FcIfOperStatusReason."
REVISION "200311060000Z"
DESCRIPTION
"Added Compliance statement for
fcIfAdminRxBbCreditModeISL and
fcIfAdminRxBbCreditModeFx."
REVISION "200310170000Z"
DESCRIPTION
"Updated Compliance statement."
REVISION "200309220000Z"
DESCRIPTION
"Added the following objects for Loop Initialization
Primitive Sequence (LIP) counters to 'fcIfErrorTable':
fcIfLipF8In, fcIfLipF8Out, fcIfNonLipF8In and
fcIfNonLipF8Out.
Added new enums to FcIfOperStatusReason.
Modified conformance information."
REVISION "200308180000Z"
DESCRIPTION
"Added fcIfStatTable. Modified conformance information."
REVISION "200306120000Z"
DESCRIPTION
"Added FcPerfBuffer TC. Added the following to fcIfTable:
fcIfPortRateMode,fcIfAdminRxPerfBuffer,
fcIfOperRxPerfBuffer,fcIfBbScn.
Added the following to fcIfCapTable:
fcIfCapBbScnCapable,fcIfCapBbScnMax,
fcIfCapOsmFrmCapable.
Added fcIfCapOsmTable,fcIfCapFrmTable.
Added more reason codes in FcIfOperStatusReason.
Replaced AUGMENTS clause with INDEX clause for the
following tables: fcIfCapTable,fcIfErrorTable.
Modified conformance information.
Deprecated following objects in fcIfCapTable:
fcIfCapRxBbCreditMax, fcIfCapRxBbCreditMin,
fcIfCapISLRxBbCreditMax,fcIfCapISLRxBbCreditMin,
fcIfCapRxBbCreditWriteable,fcIfCapRxBbCreditDefault,
fcIfCapISLRxBbCreditDefault."
REVISION "200305140000Z"
DESCRIPTION
"Modified description of fcIfAllowedVsanList2k,
fcIfAllowedVsanList4k, fcIfAdminSpeed,
fcIfAdminRxBbCredit."
REVISION "200304180000Z"
DESCRIPTION
"updated the textual convention, FcIfOperStatusReason.
Added enumerations: firstPortUpAsEport,firstPortNotUp,
peerFCIPPortClosedConnection,peerFCIPPortResetConnection,
fcipPortMaxReTx,fcipPortKeepAliveTimerExpire,
fcipPortPersistTimerExpire,fcipPortSrcLinkDown,
fcipPortSrcAdminDown,fcipPortAdminCfgChange,
fcipSrcPortRemoved,fcipSrcModuleNotOnline,invalidConfig,
portBindFailure,portFabricBindFailure,
noCommonVsanIsolation."
REVISION "200303250000Z"
DESCRIPTION
"Added: fcIfActiveVsanUpList2k, fcIfActiveVsanUpList4k.
Modified conformance information."
REVISION "200211110000Z"
DESCRIPTION
"Modified fcTrunkIfUpNotify description."
REVISION "200211010000Z"
DESCRIPTION
"Modifed fcIfTable, fcIfCapTable."
REVISION "200210020000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 289 }
ciscoFcFeObjects OBJECT IDENTIFIER
::= { ciscoFcFeMIB 1 }
cffFcFeMIBConformance OBJECT IDENTIFIER
::= { ciscoFcFeMIB 2 }
cffFcFeConfig OBJECT IDENTIFIER
::= { ciscoFcFeObjects 1 }
cffFcFeStatistics OBJECT IDENTIFIER
::= { ciscoFcFeObjects 2 }
cffFcFeNotification OBJECT IDENTIFIER
::= { ciscoFcFeObjects 3 }
cffFcFeNotifications OBJECT IDENTIFIER
::= { cffFcFeNotification 0 }
-- Textual Conventions
FcphVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the version of FC-PH supported by an
NxPort or FC-Port."
SYNTAX Integer32 (0..255)
FcBbCredit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the buffer-to-buffer credit of an
NxPort or FC-Port."
SYNTAX Integer32 (0..32767)
FcRxDataFieldSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the receive data field size of an
NxPort or FC-Port."
SYNTAX Integer32 (128..2112)
FcBbCreditModel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Buffer-to-Buffer Credit model of
an FC-Port.
regular(1) - Credit model is regular
alternate(2) - Credit model is alternate."
SYNTAX INTEGER {
regular(1),
alternate(2)
}
FcIfOperStatusReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The cause of current operational state of the
port.
'other(1)' - reasons other than defined here.
'none(2)' - no failure
'hwFailure(3)' - hardware failure.
'loopbackDiagFailure(4)' - loopback diagnostics
failure.
'errorDisabled(5)' - the port is not operational
due to some error conditions that require
administrative attention.
'swFailure(6)' - software failure.
'linkFailure(7)' - physical link failure.
'offline(8)' - physical link is in offline state
as defined in the FC-FS standards.
'nonParticipating(9)' - during loop initialization,
the port is not allowed to participate in loop
operations.
'initializing(10)' - port is being initialized.
'vsanInactive(11)'- port VSAN is inactive. The port
becomes operational again when the port VSAN is
active.
'adminDown(12)' - 'ifAdminStatus' is down(2).
'channelAdminDown(13)' - this port is a member of
a port channel and that port channel's
ifAdminStatus is 'down(2)'.
'channelOperSuspended(14)' - this port is a member
of a port channel and its operational
parameters are incompatible with the port
channel parameters.
'channelConfigurationInProgress(15)' - this port
is undergoing a port channel configuration.
'rcfInProgress(16)' - an isolated xE_port is
transmiting an reconfigure fabric, requesting
a disruptive reconfiguration in an attempt to
build a single, non-isolated fabric.
Only the Interconnect_Ports can become isolated.
'elpFailureIsolation(17)' - during a port
initialization the prospective
Interconnect_Ports find incompatible link
parameters.
'escFailureIsolation(18) - during a port
initialization the prospective
Interconnect_Ports are unable to proceed with
initialization as a result of Exchange Switch
Capabilities (ESC).
'domainOverlapIsolation(19)' - there is a overlap
in domains while attempting to connect two
existing fabrics.
'domainAddrAssignFailureIsolation(20)' - the
elected principal switch is not capable of
performing domain address manager functions so
no Nx_port traffic can be forwarded across
switches, hence all Interconnect_Ports in the
switch are isolated.
'domainOtherSideEportIsolation(21)' - the peer
e-port is isolated.
'domainInvalidRCFReceived(22)' - Invalid rcf
received.
'domainManagerDisabled(23) - domain manager is
disabled.
'zoneMergeFailureIsolation(24)' - the two
Interconnect_Ports cannot merge zoning
configuration after having exchanged merging
request for zoning.
'vsanMismatchIsolation(25)' - this vsan is not
configured on both sides of a trunk port.
'parentDown(26)' - the physical port to which this
interface is bound is down.
'srcPortNotBound(27)'- no source port is specified
for this interface.
'interfaceRemoved(28)' - interface is being
removed.
'fcotNotPresent(29)' - fcot(GBIC) not present.
'fcotVendorNotSupported(30)' - fcot(GBIC) vendor
is not supported.
'incompatibleAdminMode(31)' - port admin mode is
incompatible with port capabilities.
'incompatibleAdminSpeed(32)' - port speed is
incompatible with port capabilities.
'suspendedByMode(33)' - port that belongs to a
port channel is suspended due to incompatible
operational mode.
'suspendedBySpeed(34)' - port that belongs to a
port channel is suspended due to incompatible
operational speed.
'suspendedByWWN(35)' - port that belongs to a
port channel is suspended due to incompatible
remote switch WWN.
'domainMaxReTxFailure(36)' - domain manager
failure after maximum retries.
'eppFailure(37)' - trunk negotiation protocol
failure after maximum retries.
'portVsanMismatchIsolation(38)' - an attempt is
made to connect two switches using
non-trunking ports having different port
VSANs.
'loopbackIsolation(39)' - port is connected to
another port in the same switch.
'upgradeInProgress(40)' - linecard upgrade in
progress.
'incompatibleAdminRxBBCredit(41)' - receive
BB credit is incompatible.
'incompatibleAdminRxBufferSize(42)' - receive
buffer size is incompatible.
'portChannelMembersDown(43)' - no operational
members.
'zoneRemoteNoRespIsolation(44)' - isolation
due to remote zone server not responding.
'firstPortUpAsEport(45)' - in a over subscribed
line card, when the first port in a group
is up in E mode, other ports in that group
cannot be brought up.
'firstPortNotUp(46)' - in a over subscribed
line card, first port cannot be brought up
in E-mode when the other ports in the group
are up.
'peerFCIPPortClosedConnection(47)' - port went
down because peer FCIP port closed TCP
connection.
'peerFCIPPortResetConnection(48)' - port went
down because the TCP connection was reset
by the peer fcip port.
'fcipPortMaxReTx(49)' - fcip port went down due
to max tcp re-transmissions reached the
configured limit.
'fcipPortKeepAliveTimerExpire(50)' - fcip port
went down due to TCP keep alive timer expired.
'fcipPortPersistTimerExpire(51)' - fcip port went
down due to TCP persist timer expired.
'fcipPortSrcLinkDown(52)' - fcip port went down
due to ethernet link down.
'fcipPortSrcAdminDown(53)' - fcip port went down
because the source ethernet link was
administratively shutdown.
'fcipPortAdminCfgChange(54)' - fcip port went down
due to configuration change.
'fcipSrcPortRemoved(55)' - fcip port went down due
to source port removal.
'fcipSrcModuleNotOnline(56)' - fcip port went down
due to source module not online.
'invalidConfig(57)' - this port has a
misconfiguration with respect to port channels.
'portBindFailure(58)' - port got isolated due to
port bind failure.
'portFabricBindFailure(59)' - port got isolated
due to fabric bind failure.
'noCommonVsanIsolation(60)' - trunk is isolated
because there are no common vsans with peer.
'ficonVsanDown' - Ficon vsan down
'invalidAttachment' - Invalid attachment
'portBlocked' - Port blocked due to Ficon
'incomAdminRxBBCreditPerBuf' - disabled due
to incompatible admin port rxbbcredit,
performance buffers.
'tooManyInvalidFLOGIs' - Suspended due to too
many invalid flogis.
'deniedDueToPortBinding' - Suspended due to
port binding.
'elpFailureRevMismatch' - Isolated for ELP failure
due to revision mismatch.
'elpFailureClassFParamErr' - Isolated for ELP
failure due to class F param error.
'elpFailureClassNParamErr' - Isolated for ELP
failure due to class N param error.
'elpFailureUnknownFlowCTLCode' - Isolated for ELP
failure due to invalid flow control code
'elpFailureInvalidFlowCTLParam' - Isolated for ELP
failure due to invalid flow control param.
'elpFailureInvalidPortName' - Isolated for ELP
failure due to invalid port name.
'elpFailureInvalidSwitchName' - Isolated for ELP
failure due to invalid switch name.
'elpFailureRatovEdtovMismatch' - Isolated for ELP
failure due to R_A_TOV or E_D_TOV mismatch.
'elpFailureLoopbackDetected' - Isolated for ELP
failure due to loopback detected.
'elpFailureInvalidTxBBCredit' - Isolated for ELP
failure due to invalid transmit B2B credit.
'elpFailureInvalidPayloadSize' - Isolated for ELP
failure due to invalid payload size.
'bundleMisCfg' - misconfiguration in portchannel
membership detected.
'bitErrRTThresExceeded' - bit error rate too high.
'linkFailLinkReset' - link failure due to link
reset.
'linkFailPortInitFail' - link failure due to
port initialization failure.
'linkFailPortUnusable' - link failure due to
port unusable.
'linkFailLossOfSignal' - link failure due to
loss of signal.
'linkFailLossOfSync' - link failure due to
loss of sync.
'linkFailNOSRcvd' - link failure due to
non-operational sequences received.
'linkFailOLSRcvd' - link failure due to offline
sequences received.
'linkFailDebounceTimeout' - link failure due to
re-negotiation failed.
'linkFailLRRcvdB2B' - link failure when
link reset(LR) operation fails due to
non-empty receive queue.
'linkFailCreditLoss' - link failure due to
excessive credit loss indications.
'linkFailRxQOverFlow' - link failure due to
receive queue overflow.
'linkFailTooManyINTR' - link failure due to
excessive port interrupts.
'linkFailLIPRcvdB2B' - link failure when
loop initialization(LIP) operation fails due
to non empty receive queue.
'linkFailCreditLossB2B' - link failure when
link reset(LR) operation fails due to
queue not empty.
'linkFailOPNyTMOB2B' - link failure due to
open primitive signal timeout while receive
queue not empty.
'linkFailOPNyRETB2B' - link failure due to
open primitive signal returned while receive
queue not empty.
'linkFailLIPF8Rcvd' - link failure due to F8 LIP
received.
'linkFailLineCardPortShutdown' - link failure due
to port shutdown.
'fcspAuthenfailure' - fibre channel security
protocol authorization fail.
'fcotChksumErr' - FCOT SPROM checksum error.
'ohmsExtLBTest' - link suspended due to external
loopback diagnostics failure.
'invalidFabricBindExh' - invalid fabric binding
exchange.
'tovMismatch' - link isolation due to TOV
mismatch.
'ficonNotEnabled - Ficon not enabled.
'ficonNoPortnumber' - no Ficon portnumber.
'ficonBeingEnabled' - Ficon is being enabled.
'ePortProhibited' - port down because FICON
prohibit mask in place for E/TE port.
'portGracefulShutdown' - port has been shutdown
gracefully.
'trunkNotFullyActive' - some of the VSANs which
are common with the peer are not up.
'fabricBindingSWWNNotFound' - Peer switch WWN
not found in fabric binding active database.
'fabricBindingDomainInvalid' - Peer domain ID
is invalid in fabric binding active
database.
'fabricBindingDBMismatch' - fabric binding
active database mismatch with peer.
'fabricBindingNoRspFromPeer' - fabric binding
no response from peer.
'vsanSuspended' - dynamic VSAN is suspended.
'vsanNotFound' - dynamic VSAN not found.
'trackedPortDown' - tracked port is down.
'ecSuspendedLoop' - EC is currently suspended
for loopback.
'isolatedBundle' - isolated bundle due to
misconfigurations.
'peerNotSupportBundle' - peer deivice does not
support port channel.
'portBringupIsolation' - trunk port
isolated during bringup time.
'domainNotAllowedIsolated' - port isolated
due to domain not allowed.
'virtualIvrDomainOverlapIsolation' - port
isolated due to virtual IVR domain overlap.
'outOfService' - port is in out of service
state.
'portAuthFailed' - port has encountered
an 802.1x authentication failure.
'bundleStandby' - port cannot be brought
up in a bundle, since the bundle has maximum
members.
'portConnectorTypeErr' - Error in the
port connector type (SFP).
'errorDisabledReInitLimitReached' - the port
is not operational after trying to
initialize the port multiple times due
to some errors.
'ficonDupPortNum' - the FICON VSAN has a
duplicate port number.
'localRcf' - local disruptive reconfiguration
(the local domain became invalid; no RCF
frames have been sent outside the local
switch).
'twoSwitchesWithSameWWN' - merge attempt between
VSANs containing the same WWN. If the user
attempts to merge two different VSANs and
both have at least one switch with the same
WWN then the link in between the VSANs is
isolated.
'invalidOtherSidePrincEFPReqRecd' - EFP request
frame indicating a principal switch other
than the locally known one.
'domainOther' - other domain manager reasons
not defined here.
'elpFailureAllZeroPeerWWNRcvd' - isolated for
ELP failure due to peer WWN is received
with all zeros.
'preferredPathIsolation' - port isolated due to
preferred path not able to program the routes.
'fcRedirectIsolation' - port isolated due to
FC Redirect not being able to program routes.
'portActLicenseNotAvailable' - port not brought up
due to lack of port activation licenses.
'sdmIsolation' - port isolated due to SDM not being
able to program routes.
'fcidAllocationFailed' - port down due to failure
in FCID allocation.
'externallyDisabled' - port externally disabled.
'unavailableNPVUpstreamPort' - NPV upstream port
not available.
'unavailableNPVPrefUpstreamPort' - NPV preferred
upstream port not available.
'sfpReadError' - the port is not operational due to
SFP read error.
'stickyDownOnLinkFailure' - the port is not operational
due to link failure in the sticky down mode.
'tooManyLinkFlapsErr' - too many link flaps on the port
in a short interval.
'unidirectionalUDLD' - unidirectional UDLD detected.
'txRxLoopUDLD' - UDLD Tx Rx loop.
'neighborMismatchUDLD' - UDLD neighbor mismatch.
'authzPending' - authorization pending.
'hotStdbyInBundle' - hot standby in bundle.
'incompleteConfig' - all parameters on the port have not been
configured.
'incompleteTunnelCfg' - incomplete tunnel config.
'hwProgrammingFailed' - hardware programming failed.
'tunnelDstUnreachable' - no route to tunnel destination
address.
'suspendByMtu' - MTU allocation failed.
'sfpInvalid' - SFP is not Cisco certified.
'sfpAbsent' - SFP is absent.
'portCapabilitiesUnknown' - the capabilities of the port are
unknown.
'channelErrDisabled' - the port-channel to which the port
belongs is in error disabled state.
'vrfMismatch' - Mismatch in source and transport VRF.
'vrfForwardReferencing' - Forward referencing transport VRF.
'dupTunnelConfigDetected' - two tunnel interfaces with same
configuration is not allowed.
'primaryVLANDown' - primary VLAN is in down state.
'vrfUnusable' - VRF is unusable.
'errDisableHandShkFailure' - port is not operational due to
an internal handshake failure.
'errDisabledBPDUGuard' - BPDUGuard triggered error disable on
the port.
'dot1xSecViolationErrDisabled' - error disabled due to dot1x
security violation.
'emptyEchoUDLD' - UDLD empty echo.
'vfTaggingCapErr' - VF Tagging capability mismatch error.
'portDisabled' - Port disabled.
'tunnelModeNotConfigured' - Tunnel Mode is not configured.
'tunnelSrcNotConfigured' - Tunnel Source is not configured.
'tunnelDstNotConfigured' - Tunnel Destination is not
configured.
'tunnelUnableToResolveSrcIP' - Unable to resolve tunnel
source IP address.
'tunnelUnableToResolveDstIP' - Unable to resolve tunnel
destination IP address.
'tunnelVrfDown' - Tunnel VRF down.
'sifAdminDown' - SIF is admin down.
'phyIntfDown' - Physical interface is down.
'ifSifLimitExceeded' - Interface SIF limit is exceeded.
'sifHoldDown' - SIF hold down.
'noFcoe' - No FCOE configuration.
'dcxCompatMismatch' - DCX Compatibility Mismatch.
'isolateBundleLimitExceeded' - Isolation due to bundle
limit exceeded.
'sifNotBound' - SIF is not bound.
'errDisabledLacpMiscfg' - Error Disabled due to LACP
misconfig.
'satFabricIfDown' - Satellite fabric interface down.
'invalidSatFabricIf' - Invalid satellite fabric interface.
'noRemoteChassis' - No remote chassis.
'vicEnableNotReceived' - VIC enable not received.
'vicDisableReceived' - VIC disable received.
'vlanVsanMappingNotEnabled' - VLAN VSAN mapping not enabled.
'stpNotFwdingInFcoeMappedVlan' - STP not forwarding in FCOE
Mapped Vlan.
'moduleOffline' - Module Offline.
'udldAggModeLinkFailure' - UDLD aggresive mode link failure.
'stpInconsVpcPeerDisabled' - STP inconsistent VPC peer
disabled.
'setPortStateFailed' - Set port state failed.
'suspendedByVpc' - Suspended by VPC.
'vpcCfgInProgress' - VPC configuration in progress.
'vpcPeerLinkDown' - VPC peer link down.
'vpcNoRspFromPeer' - VPC no response from peer.
'protoPortSuspend' - Proto port suspend.
'tunnelSrcDown' - Tunnel source down.
'cdpInfoUnavailable' - CDP information unavailable.
'fexSfpInvalid' - FEX SFP invalid.
'errDisabledIpConflict' - Error Disabled due to IP conflict.
'fcotClkRateMismatch' - FCOT CLK rate mismatch.
'portGuardTrustSecViolation' - Error disabled due to port guard
(Cisco Trusted Security Violation).
'sdpTimeout' - SDP timeout.
'satIncompatTopo' - Satellite incompatible topology.
'waitForFlogi' - Wait for FLOGI.
'satNotConfigured' - Satellite not configured.
'npivNotEnabledInUpstream' - NPIV not enabled in upstream.
'vsanMismatchWithUpstreamSwPort' - VSAN mismatch with upstream
switch port.
'portGuardBitErrRate' - Error disabled due to port guard
(Bit Error Rate).
'portGuardSigLoss' - Error disabled due to port guard
(Signal Loss).
'portGuardSyncLoss' - Error disabled due to port guard
(Sync Loss).
'portGuardLinkReset' - Error disabled due to port guard
(Link Reset).
'portGuardCreditLoss' - Error disabled due to port guard
(Credit Loss).
'ipQosMgrPolicyAppFailure' - IP QOS Manager policy
application failure.
'pauseRateLimitErrDisabled' - Port error disabled due
to pause rate limit condition.
'lstGrpUplinkDown' - EthPM LSTGRP downstream link down
due to upstream link down.
'stickyDnLinkFailure' - Port kept in error disabled
state due to Link Failure.
'routerMacFailure' - Router MAC failure.
'dcxMultipleMsapIds' - Port error disabled due to
multiple MSAP IDs (DCX).
'dcxHundredPdusRcvdNoAck' - Hundred PDUs received without
ACK (DCX).
'enmSatIncompatibleUplink' - Satellite Incompatible Uplink.
'enmLoopDetected' - Loop Detected (ENM).
'nonStickyExternallyDisabled' - Disabled by VPD Manager with
SHut/No Shut allowed.
'subGroupIdNotAssigned' - Sub-group ID not assigned.
'vemUnlicensed' - VEM Unlicensed.
'profileNotFound' - Profile not found.
'nonExistentVlan' - VLAN does not exist.
'vlanInvalidType' - Invalid VLAN type.
'vlanDown' - VLAN down.
'vpcPeerUpgrade' - VPC Peer Upgrade.
'ipQosDcbxpCompatFailure' - IPQOS DCBXP compatibility
failure.
'nonCiscoHbaVfTag' - Error Disabled due to Non-Cisco HBA
VF Tag.
'domainIdConfigMismatch' - Domain ID config mismatch.
'sfpSpeedMismatch' - SFP speed mismatch."
SYNTAX INTEGER {
other(1),
none(2),
hwFailure(3),
loopbackDiagFailure(4),
errorDisabled(5),
swFailure(6),
linkFailure(7),
offline(8),
nonParticipating(9),
initializing(10),
vsanInactive(11),
adminDown(12),
channelAdminDown(13),
channelOperSuspended(14),
channelConfigurationInProgress(15),
rcfInProgress(16),
elpFailureIsolation(17),
escFailureIsolation(18),
domainOverlapIsolation(19),
domainAddrAssignFailureIsolation(20),
domainOtherSideEportIsolation(21),
domainInvalidRCFReceived(22),
domainManagerDisabled(23),
zoneMergeFailureIsolation(24),
vsanMismatchIsolation(25),
parentDown(26),
srcPortNotBound(27),
interfaceRemoved(28),
fcotNotPresent(29),
fcotVendorNotSupported(30),
incompatibleAdminMode(31),
incompatibleAdminSpeed(32),
suspendedByMode(33),
suspendedBySpeed(34),
suspendedByWWN(35),
domainMaxReTxFailure(36),
eppFailure(37),
portVsanMismatchIsolation(38),
loopbackIsolation(39),
upgradeInProgress(40),
incompatibleAdminRxBBCredit(41),
incompatibleAdminRxBufferSize(42),
portChannelMembersDown(43),
zoneRemoteNoRespIsolation(44),
firstPortUpAsEport(45),
firstPortNotUp(46),
peerFCIPPortClosedConnection(47),
peerFCIPPortResetConnection(48),
fcipPortMaxReTx(49),
fcipPortKeepAliveTimerExpire(50),
fcipPortPersistTimerExpire(51),
fcipPortSrcLinkDown(52),
fcipPortSrcAdminDown(53),
fcipPortAdminCfgChange(54),
fcipSrcPortRemoved(55),
fcipSrcModuleNotOnline(56),
invalidConfig(57),
portBindFailure(58),
portFabricBindFailure(59),
noCommonVsanIsolation(60),
ficonVsanDown(61),
invalidAttachment(62),
portBlocked(63),
incomAdminRxBBCreditPerBuf(64),
tooManyInvalidFLOGIs(65),
deniedDueToPortBinding(66),
elpFailureRevMismatch(67),
elpFailureClassFParamErr(68),
elpFailureClassNParamErr(69),
elpFailureUnknownFlowCTLCode(70),
elpFailureInvalidFlowCTLParam(71),
elpFailureInvalidPortName(72),
elpFailureInvalidSwitchName(73),
elpFailureRatovEdtovMismatch(74),
elpFailureLoopbackDetected(75),
elpFailureInvalidTxBBCredit(76),
elpFailureInvalidPayloadSize(77),
bundleMisCfg(78),
bitErrRTThresExceeded(79),
linkFailLinkReset(80),
linkFailPortInitFail(81),
linkFailPortUnusable(82),
linkFailLossOfSignal(83),
linkFailLossOfSync(84),
linkFailNOSRcvd(85),
linkFailOLSRcvd(86),
linkFailDebounceTimeout(87),
linkFailLRRcvdB2B(88),
linkFailCreditLoss(89),
linkFailRxQOverFlow(90),
linkFailTooManyINTR(91),
linkFailLIPRcvdB2B(92),
linkFailCreditLossB2B(93),
linkFailOPNYTMOB2B(94),
linkFailOPNYRETB2B(95),
linkFailLIPF8Rcvd(96),
linkFailLineCardPortShutdown(97),
fcspAuthenfailure(98),
fcotChksumErr(99),
ohmsExtLBTest(100),
invalidFabricBindExh(101),
tovMismatch(102),
ficonNotEnabled(103),
ficonNoPortnumber(104),
ficonBeingEnabled(105),
ePortProhibited(106),
portGracefulShutdown(107),
trunkNotFullyActive(108),
fabricBindingSWWNNotFound(109),
fabricBindingDomainInvalid(110),
fabricBindingDBMismatch(111),
fabricBindingNoRspFromPeer(112),
vsanSuspended(113),
vsanNotFound(114),
trackedPortDown(115),
ecSuspendedLoop(116),
isolatedBundle(117),
peerNotSupportBundle(118),
portBringupIsolation(119),
domainNotAllowedIsolated(120),
virtualIvrDomainOverlapIsolation(121),
outOfService(122),
portAuthFailed(123),
bundleStandby(124),
portConnectorTypeErr(125),
errorDisabledReInitLimitReached(126),
ficonDupPortNum(127),
localRcf(128),
twoSwitchesWithSameWWN(129),
invalidOtherSidePrincEFPReqRecd(130),
domainOther(131),
elpFailureAllZeroPeerWWNRcvd(132),
preferredPathIsolation(133),
fcRedirectIsolation(134),
portActLicenseNotAvailable(135),
sdmIsolation(136),
fcidAllocationFailed(137),
externallyDisabled(138),
unavailableNPVUpstreamPort(139),
unavailableNPVPrefUpstreamPort(140),
sfpReadError(141),
stickyDownOnLinkFailure(142),
tooManyLinkFlapsErr(143),
unidirectionalUDLD(144),
txRxLoopUDLD(145),
neighborMismatchUDLD(146),
authzPending(147),
hotStdbyInBundle(148),
incompleteConfig(149),
incompleteTunnelCfg(150),
hwProgrammingFailed(151),
tunnelDstUnreachable(152),
suspendByMtu(153),
sfpInvalid(154),
sfpAbsent(155),
portCapabilitiesUnknown(156),
channelErrDisabled(157),
vrfMismatch(158),
vrfForwardReferencing(159),
dupTunnelConfigDetected(160),
primaryVLANDown(161),
vrfUnusable(162),
errDisableHandShkFailure(163),
errDisabledBPDUGuard(164),
dot1xSecViolationErrDisabled(165),
emptyEchoUDLD(166),
vfTaggingCapErr(167),
portDisabled(168),
tunnelModeNotConfigured(169),
tunnelSrcNotConfigured(170),
tunnelDstNotConfigured(171),
tunnelUnableToResolveSrcIP(172),
tunnelUnableToResolveDstIP(173),
tunnelVrfDown(174),
sifAdminDown(175),
phyIntfDown(176),
ifSifLimitExceeded(177),
sifHoldDown(178),
noFcoe(179),
dcxCompatMismatch(180),
isolateBundleLimitExceeded(181),
sifNotBound(182),
errDisabledLacpMiscfg(183),
satFabricIfDown(184),
invalidSatFabricIf(185),
noRemoteChassis(186),
vicEnableNotReceived(187),
vicDisableReceived(188),
vlanVsanMappingNotEnabled(189),
stpNotFwdingInFcoeMappedVlan(190),
moduleOffline(191),
udldAggModeLinkFailure(192),
stpInconsVpcPeerDisabled(193),
setPortStateFailed(194),
suspendedByVpc(195),
vpcCfgInProgress(196),
vpcPeerLinkDown(197),
vpcNoRspFromPeer(198),
protoPortSuspend(199),
tunnelSrcDown(200),
cdpInfoUnavailable(201),
fexSfpInvalid(202),
errDisabledIpConflict(203),
fcotClkRateMismatch(204),
portGuardTrustSecViolation(205),
sdpTimeout(206),
satIncompatTopo(207),
waitForFlogi(208),
satNotConfigured(209),
npivNotEnabledInUpstream(210),
vsanMismatchWithUpstreamSwPort(211),
portGuardBitErrRate(212),
portGuardSigLoss(213),
portGuardSyncLoss(214),
portGuardLinkReset(215),
portGuardCreditLoss(216),
ipQosMgrPolicyAppFailure(217),
pauseRateLimitErrDisabled(218),
lstGrpUplinkDown(219),
stickyDnLinkFailure(220),
routerMacFailure(221),
dcxMultipleMsapIds(222),
dcxHundredPdusRcvdNoAck(223),
enmSatIncompatibleUplink(224),
enmLoopDetected(225),
nonStickyExternallyDisabled(226),
subGroupIdNotAssigned(227),
vemUnlicensed(228),
profileNotFound(229),
nonExistentVlan(230),
vlanInvalidType(231),
vlanDown(232),
vpcPeerUpgrade(233),
ipQosDcbxpCompatFailure(234),
nonCiscoHbaVfTag(235),
domainIdConfigMismatch(236),
sfpSpeedMismatch(237)
}
FcPerfBuffer ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the number of performance buffers of a
physical FC-port. These buffers in addition to the
buffer-to-buffer credits are used to improve the
performance of a port, hence called
'Performance buffers'. A value of zero for this
means the agent uses the built-in algorithm to
calculate the number of performance buffers to be
used"
SYNTAX Integer32 (0..145)
-- fibre element group information
cffFcFeElementName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The World-Wide Name of this fabric element. It's a
64-bit identifier and is unique worldwide."
::= { cffFcFeConfig 1 }
-- fcIfTable
fcIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry per fibre channel switch
port interface. Each entry holds the port interface
parameters. The entries are created by the fabric
switch when a module is inserted and it identifies a
port on the module.
Similarly when a module is removed from the fabric
switch all the port entries in this table
corresponding to that module are removed.
This table also hold entries for Port Channel ports.
NOTE: Nx_ports are not represented in this table."
::= { cffFcFeConfig 2 }
fcIfEntry OBJECT-TYPE
SYNTAX FcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains FC-port configuration parameters
and state information."
INDEX { ifIndex }
::= { fcIfTable 1 }
FcIfEntry ::= SEQUENCE {
fcIfWwn FcNameId,
fcIfAdminMode FcPortTypes,
fcIfOperMode FcPortTypes,
fcIfAdminSpeed FcIfSpeed,
fcIfBeaconMode TruthValue,
fcIfPortChannelIfIndex InterfaceIndexOrZero,
fcIfOperStatusCause FcIfOperStatusReason,
fcIfOperStatusCauseDescr SnmpAdminString,
fcIfAdminTrunkMode INTEGER,
fcIfOperTrunkMode INTEGER,
fcIfAllowedVsanList2k FcList,
fcIfAllowedVsanList4k FcList,
fcIfActiveVsanList2k FcList,
fcIfActiveVsanList4k FcList,
fcIfBbCreditModel FcBbCreditModel,
fcIfHoldTime MicroSeconds,
fcIfTransmitterType FcPortTxTypes,
fcIfConnectorType FcPortModuleTypes,
fcIfSerialNo SnmpAdminString,
fcIfRevision SnmpAdminString,
fcIfVendor SnmpAdminString,
fcIfSFPSerialIDData SnmpAdminString,
fcIfPartNumber SnmpAdminString,
fcIfAdminRxBbCredit FcBbCredit,
fcIfAdminRxBbCreditModeISL FcBbCredit,
fcIfAdminRxBbCreditModeFx FcBbCredit,
fcIfOperRxBbCredit FcBbCredit,
fcIfRxDataFieldSize FcRxDataFieldSize,
fcIfActiveVsanUpList2k FcList,
fcIfActiveVsanUpList4k FcList,
fcIfPortRateMode INTEGER,
fcIfAdminRxPerfBuffer FcPerfBuffer,
fcIfOperRxPerfBuffer FcPerfBuffer,
fcIfBbScn Unsigned32,
fcIfPortInitStatus TruthValue,
fcIfAdminRxBbCreditExtended FcBbCredit,
fcIfFcTunnelIfIndex InterfaceIndexOrZero,
fcIfServiceState FcIfServiceStateType,
fcIfAdminBbScnMode TruthValue,
fcIfPortType INTEGER
}
fcIfWwn OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World-Wide Name of this FC-Port. It's a 64-bit
identifier and is unique worldwide."
::= { fcIfEntry 1 }
fcIfAdminMode OBJECT-TYPE
SYNTAX FcPortTypes
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port mode configured by the user. If the user
configured the port as auto(1), then the port
initialization scheme determines the mode of the port.
In this case the user can look at 'fcIfOperMode' to
determine the current operating mode of port.
If this interface is a Port Channel port then only
auto(1) or ePort(4) is allowed."
DEFVAL { auto }
::= { fcIfEntry 2 }
fcIfOperMode OBJECT-TYPE
SYNTAX FcPortTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operating mode of the port.
This object will also be an additional varbind sent
in the linkUp notification ( defined in IF-MIB ) in
addition to the varbinds defined for this notification."
::= { fcIfEntry 3 }
fcIfAdminSpeed OBJECT-TYPE
SYNTAX FcIfSpeed
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port speed configured by the user.
If this interface is a member of a port channel port
then this object cannot be modified.
Since this is a characteristic of a physical port, this
object may not be applicable for some non-physical
ports, i.e., the value is instantiated but its value is
irrelevant."
DEFVAL { auto }
::= { fcIfEntry 4 }
fcIfBeaconMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Beacon mode configured by the user.
If 'true', the Beacon mode is enabled.
If 'false', the beacon mode is disabled.
In Beacon mode, an interface LED is put into flashing
mode for easy identification of a particular
interface."
DEFVAL { true }
::= { fcIfEntry 5 }
fcIfPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port channel port this port belongs
to.
A value of zero indicates that this port is not part
of any port channel.
For port channel port this object will have the ifIndex
of the port channel port itself."
::= { fcIfEntry 6 }
fcIfOperStatusCause OBJECT-TYPE
SYNTAX FcIfOperStatusReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cause of current operational state of the
port.
The current operational state of the port is shown by
the 'ifOperStatus' defined in IF-MIB. This object
will show 'none(2)' for all the 'ifOperStatus' values
except for 'down(2)'. It will show one of the values
from the 'FcIfOperStatusReason' textual convention
if 'ifOperStatus' is 'down(2)'. It will show other(1)
if the operational status cause is not from one
defined in 'FcIfOperStatusReason'.
This object will also be an additional varbind sent
in the linkDown notification ( defined in IF-MIB ) in
addition to the varbinds defined for this notification."
::= { fcIfEntry 7 }
fcIfOperStatusCauseDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description for the cause of current operational
state of the port, shown by the object
'fcIfOperStatusCause'."
::= { fcIfEntry 8 }
fcIfAdminTrunkMode OBJECT-TYPE
SYNTAX INTEGER {
nonTrunk(1),
trunk(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunking mode configured by the user.
When set to 'nonTrunk(1)', the port negotiates and
converts the link into non-trunking mode. This port
and the neighboring port's fcIfOperTrunkMode becomes
non-trunk. When set to 'trunk(2)', the port
negotiates and converts the link into trunking mode
only if the neighboring port, fcIfAdminTrunkMode is
either 'trunk(2)' or 'auto(3)'. When set to
'auto(3)', the port is willing to convert the link
to a trunk link only if the the neighboring port,
fcIfAdminTrunkMode is set to 'trunk(2)' mode."
DEFVAL { nonTrunk }
::= { fcIfEntry 9 }
fcIfOperTrunkMode OBJECT-TYPE
SYNTAX INTEGER {
nonTrunk(1),
trunk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current trunking mode of the port."
::= { fcIfEntry 10 }
fcIfAllowedVsanList2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VSANs (in the range 0 through 2047)
which are allowed to be received/transmitted on the
port when the port is operating in trunking mode.
Only ports operating in trunk mode can belong to
multiple VSANs. Each octet within the value of this
object specifies a set of eight VSANs, with the first
octet specifying VSANs 0 through 7, the second octet
specifying VSANs 8 through 15, etc. Within each octet,
the most significant bit represents the lowest
numbered VSAN, and the least significant bit
represents the highest numbered VSAN. Thus, each
VSAN, is represented by a single bit within the value
of this object. The corresponding VSAN is allowed on
this port if and only if that bit has a value of '1'.
VSAN 0 is reserved.
This object is applicable to only ports operating
in trunk mode.
The value configured to this object will be retained
but will not be applicable when the port is put into
non-trunking mode. It will be again applicable when
the port is operating in trunking mode.
Similarly, it can be modified at the time when this
object is not applicable, i.e. when the port is
operating in non-trunking mode, but the modified value
is retained for use on subsequent occasions when this
object is applicable when the port is operating in
trunking mode."
::= { fcIfEntry 11 }
fcIfAllowedVsanList4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of VSANs (in the range 2048 to 4096 )
which are allowed to be received/transmitted on the
port when the port is operating in trunking mode.
Only ports operating in trunk mode can belong to
multiple VSANs. Each octet within the value of this
object specifies a set of eight VSANs, with the first
octet specifying VSANs 2048 through 2055, the second
octet specifying VSANs 2056 through 2063, etc. Within
each octet, the most significant bit represents the
lowest numbered VSAN, and the least significant bit
represents the highest numbered VSAN. Thus, each
VSAN, is represented by a single bit within the value
of this object. The corresponding VSAN is allowed on
this port if and only if that bit has a value of '1'.
This object is applicable to only ports operating
in trunk mode.
The value configured to this object will be retained
but will not be applicable when the port is put into
non-trunking mode. It will be again applicable when
the port is operating in trunking mode.
Similarly, it can be modified at the time when this
object is not applicable, i.e. when the port is
operating in non-trunking mode, but the modified value
is retained for use on subsequent occasions when this
object is applicable when the port is operating in
trunking mode."
::= { fcIfEntry 12 }
fcIfActiveVsanList2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of VSANs (in the range 0 through 2047)
this port is associated with. Only ports
operating in trunk mode can belong to multiple VSANs.
Each octet within the value of this object specifies
a set of eight VSANs, with the first octet specifying
VSANs 0 through 7, the second octet specifying
VSANs 8 through 15, etc. Within each octet, the most
significant bit represents the lowest numbered
VSAN, and the least significant bit represents the
highest numbered VSAN. Thus, each VSAN, that this port
is associated with, is represented by a single
bit within the value of this object. The corresponding
VSAN that this port is a member of is active if and
only if that bit has a value of '1'.
Note that the zero-length string represents that none
of the VSANs that this port is a member of are active.
VSAN 0 is reserved.
This object is applicable to only ports operating
in trunk mode."
::= { fcIfEntry 13 }
fcIfActiveVsanList4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of VSANs (in the range 2048 through 4096)
this port is associated with. Only ports
operating in trunk mode can belong to multiple VSANs.
Each octet within the value of this object specifies
a set of eight VSANs, with the first octet specifying
VSANs 2048 through 2055, the second octet specifying
VSANs 2056 through 2063, etc. Within each octet, the
most significant bit represents the lowest numbered
VSAN, and the least significant bit represents the
highest numbered VSAN. Thus, each VSAN, that this port
is associated with, is represented by a single
bit within the value of this object. The corresponding
VSAN that this port is a member of is active if and
only if that bit has a value of '1'.
Note that the zero-length string represents that none
of the VSANs that this port is a member of are active.
This object is applicable to only ports operating
in trunk mode."
::= { fcIfEntry 14 }
fcIfBbCreditModel OBJECT-TYPE
SYNTAX FcBbCreditModel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BB_Credit model used by the FC-port.
The alternate BB_Credit management model can be used
in the arbitrated loop topology to manage the flow of
frames between the two ports participating in the
current loop circuit.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 15 }
fcIfHoldTime OBJECT-TYPE
SYNTAX MicroSeconds
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time that the FC-Port shall hold a frame
in the transmitter buffer before discarding it, if it
is unable to deliver the frame.
The value 0 in this object means the frame will be
discarded immediately if the port is unable to deliver
the frame.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 16 }
fcIfTransmitterType OBJECT-TYPE
SYNTAX FcPortTxTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The technology of the port transceiver.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 17 }
fcIfConnectorType OBJECT-TYPE
SYNTAX FcPortModuleTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module type of the port connector. This object
refers to the hardware implementation of the port.
It will be 'embedded' if the hardware equivalent to
Gigabit interface card ( GBIC ) is part of the line
card and is unremovable. It will be 'glm' if its a
gigabit link module ( GLM ). A GLM has a different form
factor than GBIC. GLM is not supported by our switch.
It will be 'gbicWithSerialID' if the GBIC serial id
can be read, else it will be 'gbicWithoutSerialID'.
It will be 'sfpWithSerialID', if the small form
factor ( SFP ) pluggable GBICs serial id can be read,
else it will be 'sfpWithoutSerialID'.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 18 }
fcIfSerialNo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the connector unit ( e.g.,
for a GBIC ). If this is not applicable, return a
zero-length string.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 19 }
fcIfRevision OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port revision of the connector unit (e.g., for a
GBIC). If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 20 }
fcIfVendor OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector unit ( e.g., for a GBIC ) vendor.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 21 }
fcIfSFPSerialIDData OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector unit ( e.g., for a GBIC ) Serial ID
data.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 22 }
fcIfPartNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector unit ( e.g., for a GBIC ) part number.
If this is not applicable it returns a
zero-length string.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfEntry 23 }
fcIfAdminRxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The receive buffer-to-buffer credits configured for
this port. If the value configured is zero, then
the value of the object fcIfCapOsmRxBbCreditDefault or
fcIfCapFrmRxBbCreditDefault is used if the port is
operating in Fx mode. Value of
fcIfCapOsmRxBbCreditDefault is used if fcIfPortRateMode
is 'shared'. Value of fcIfCapFrmRxBbCreditDefault is
used if fcIfPortRateMode is 'dedicated'.
Similarly, if the port is operating in inter switch link
(ISL) mode then the value of the object
fcIfCapOsmISLRxBbCreditDefault or
fcIfCapFrmISLRxBbCreditDefault is used. Value of
fcIfCapOsmISLRxBbCreditDefault is used if
fcIfPortRateMode is 'shared'. Value of
fcIfCapFrmISLRxBbCreditDefault is used if
fcIfPortRateMode is 'dedicated'.
If a non-zero value is configured for this object then,
if the values configured for fcIfAdminRxBbCreditModeISL
and fcIfAdminRxBbCreditModeFx is zero, then the
value of this object is used for the port operating
in either Fx or ISL port mode. But if
fcIfAdminRxBbCreditModeISL is configured with a valid
value, then the value of fcIfAdminRxBbCreditModeISL
object is used instead of this value, if the port is
operating in ISL port mode. Similarly, if
the values configured for fcIfAdminRxBbCreditModeFx
is valid, then the value of fcIfAdminRxBbCreditModeFx
object is used instead of this value, if the port is
operating in Fx mode.
If this object is set to non-zero value then
objects fcIfAdminRxBbCreditModeISL and
fcIfAdminRxBbCreditModeFx are set to zero at that time.
But later the objects fcIfAdminRxBbCreditModeISL and
fcIfAdminRxBbCreditModeFx can be configured to non-zero
values even if this object present value is non-zero.
NOTE: The value of this object is not used if
cfcFeatureCtrlIndex object is configured with a value
of 'extenedCredit' and fcIfAdminRxBbCreditExtended
object is configured."
REFERENCE "cfcFeatureCtrlIndex in CISCO-FEATURE-CONTROL-MIB."
::= { fcIfEntry 24 }
fcIfAdminRxBbCreditModeISL OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The receive buffer-to-buffer credits configured for
this port to be used if it is operating in
xE_port mode.
NOTE: The value of this object is not used if
cfcFeatureCtrlIndex object is configured with a value
of 'extenedCredit' and fcIfAdminRxBbCreditExtended
object is configured."
REFERENCE "cfcFeatureCtrlIndex in CISCO-FEATURE-CONTROL-MIB."
::= { fcIfEntry 25 }
fcIfAdminRxBbCreditModeFx OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The receive buffer-to-buffer credits configured for
this port to be used if it is operating in
Fx mode.
NOTE: The value of this object is not used if
cfcFeatureCtrlIndex object is configured with a value
of 'extenedCredit' and fcIfAdminRxBbCreditExtended
object is configured."
REFERENCE "cfcFeatureCtrlIndex in CISCO-FEATURE-CONTROL-MIB."
::= { fcIfEntry 26 }
fcIfOperRxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive buffer-to-buffer credits configured for
the operational port mode."
::= { fcIfEntry 27 }
fcIfRxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The largest Data_Field size for an FT_1 frame that
can be received by this port."
::= { fcIfEntry 28 }
fcIfActiveVsanUpList2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of VSANs (in the range 0 through 2047) whose
operational state is 'up', that this port is
associated with. Only ports operating in trunk mode
can be associated to multiple VSANs.
Each octet within the value of this object specifies
a set of eight VSANs, with the first octet specifying
VSANs 0 through 7, the second octet specifying
VSANs 8 through 15, etc. Within each octet, the most
significant bit represents the lowest numbered
VSAN, and the least significant bit represents the
highest numbered VSAN. Thus, each VSAN, whose
operational state is 'up', that this port is
associated with, is represented by a single bit within
the value of this object. The corresponding
VSAN that this port is a member of is operationally
'up' if and only if that bit has a value of '1'.
Note that the zero-length string represents that none
of the VSANs that this port is a member of are
operationally 'up'. VSAN 0 is reserved.
This object is applicable to only ports operating
in trunk mode."
::= { fcIfEntry 29 }
fcIfActiveVsanUpList4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of VSANs (in the range 2048 to 4096 ) whose
operational state is 'up', that this port is
associated with. Only ports operating in trunk mode
can be associated to multiple VSANs.
Each octet within the value of this object specifies
a set of eight VSANs, with the first octet specifying
VSANs 2048 through 2055, the second octet specifying
VSANs 2056 through 2063, etc. Within each octet, the
most significant bit represents the lowest numbered
VSAN, and the least significant bit represents the
highest numbered VSAN. Thus, each VSAN, whose
operational state is 'up', that this port is
associated with, is represented by a single bit within
the value of this object. The corresponding
VSAN that this port is a member of is operationally
'up' if and only if that bit has a value of '1'.
Note that the zero-length string represents that none
of the VSANs that this port is a member of are active.
This object is applicable to only ports operating
in trunk mode."
::= { fcIfEntry 30 }
fcIfPortRateMode OBJECT-TYPE
SYNTAX INTEGER {
dedicated(1),
shared(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate of data traffic supported by this port.
'dedicated' - this interface is operating in
dedicated rate mode. In dedicated rate
mode each interface has an allocated
fabric bandwidth to sustain line rate
traffic at the maximum configured
operating speed.
'shared' - this interface is operating in over
subscription mode. In over subscription
mode the available fabric bandwidth of
a link is shared by more than one
interface, so that multiple front panel
ports share the same link internally to
the switch fabric.
For modules that are capable of switching between
'dedicated' and 'shared' modes, certain restrictions
apply based on the available bandwidth and speed.
The keywords 'osm' and 'shared', 'frm' and 'dedicated'
are interchangeable."
::= { fcIfEntry 31 }
fcIfAdminRxPerfBuffer OBJECT-TYPE
SYNTAX FcPerfBuffer
UNITS "buffers"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The performance buffers configured for this port. These
buffers in addition to the buffer-to-buffer credits are
used to improve the performance of a port, hence called
'Performance buffers'. If a value of zero is set for this
object, then the agent uses the built-in algorithm to
calculate the number of performance buffers to be used."
DEFVAL { 0 }
::= { fcIfEntry 32 }
fcIfOperRxPerfBuffer OBJECT-TYPE
SYNTAX FcPerfBuffer
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance buffers presently operational on this
port."
::= { fcIfEntry 33 }
fcIfBbScn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer-to-buffer state change number operational on
this interface."
REFERENCE "FC-FS REV1_90 Section 15.6.2.5"
::= { fcIfEntry 34 }
fcIfPortInitStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If 'true', this port successfully completed a
link initialization or there was an error during link
initialization.
If 'false', this port did not perform successful link
initialization since it was brought down by the
user or switch was powered up."
::= { fcIfEntry 35 }
fcIfAdminRxBbCreditExtended OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the extended BB credits
that can be configured on an FC port (in the
range 256 through 4095). The acceptable value
depends on the BB credit configuration of other
ports in the line card. Since this is an optional
feature, the value of this object can only be
modified after (enabling extended credit feature)
cfcFeatureCtrlIndex object is configured with a
value of 'extenedCredit'. If extended credit
feature is enabled, the MIB objects
fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx values are not used;
instead fcIfAdminRxBbCreditExtended is used
regardless of port mode operation. If
extended credit feature is disabled, the previous
configured values of fcIfAdminRxBbCredit
fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx are used as defined.
NOTE: This object can be modified only on certain
modules having hardware capability to support the
extended BB credit feature."
REFERENCE "cfcFeatureCtrlIndex in CISCO-FEATURE-CONTROL-MIB."
::= { fcIfEntry 36 }
fcIfFcTunnelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ifIndex of a FC tunnel
that represents a logical Fibre Channel data path
between a source switch and destination switch.
RSPAN uses a special FC tunnel that originates
at the ST port in the source switch and terminates
at the SD port in the destination switch. The FC
tunnel must be first bound to an ST port in the source
switch and then mapped to an SD port in the destination
switch for RSPAN feature configuration, which enables
monitoring traffic from a remote switch.
A value of zero indicates that no FC tunnel is mapped to
a ST port.
GLOSSARY:
SPAN: Switch Port Analyzer (SPAN) is a feature that
enables user to analyze network traffic in a
switched network using network analyzer attached
to a switch port.
RSPAN: Remote SPAN that enables monitoring of traffic
from remote switches.
FC tunnel: An FC tunnel is a logical data path
between a source switch and destination switch.
SPAN tunnel (ST) port: The ST port is used to forward
traffic to FC tunnel.
SPAN destination (SD) port: The SD port is used to
forward traffic to an Analyzer for monitoring
purposes."
::= { fcIfEntry 37 }
fcIfServiceState OBJECT-TYPE
SYNTAX FcIfServiceStateType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The service state of the interface. Some but not all
interfaces, e.g., those on hardware modules with a
capability of supporting shared resources, can have
their state changed to 'outOfService'. Examples of
such shared resources include speed/bandwidth and
buffer memory. Shared resources include the values
of the following objects:
fcIfAdminSpeed,
fcIfAdminMode,
fcIfPortRateMode,
fcIfAdminRxBbCredit,
fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx,
fcIfAdminRxBbCreditExtended,
fcIfAdminRxPerfBuffer.
When an attempt is made to change a particular
interface's value for this object to 'outOfService':
- if the interface's ifAdminStatus is 'up' or if the
interface is a part of a Port channel, then the
change to the value of this object is rejected.
- if the interface's value of this object is
successfully changed to 'outOfService', then each
and every user-configured parameter value of the
above-listed shared resource objects for that
interface is set to its default value.
When an interface is in the 'outOfService' state then:
- the interface is not operational and no packets
can be passed,
- the interface's shared resource objects can not be
configured to non-default values,
- the interface cannot be added to a port channel.
- the interface cannot be involved in a port swap
(using cficonPortSwapTable in CISCO-FICON-MIB).
- ifAdminStatus in IF-MIB cannot be changed to 'up'
state.
- other interface objects are not affected.
Changing the value of this object on one interface to
'outOfService' does not affect the functionality of any
other interface.
When an attempt is made to change a particular interface's
value for this object to 'inService', the attempt is
rejected if necessary shared resources are unavailable."
DEFVAL { inService }
::= { fcIfEntry 38 }
fcIfAdminBbScnMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Buffer-to-buffer State Change Number (BB_SC_N)
field (word 1, bits 15-12) specifies the
Buffer-to-buffer State Change Number. It indicates
that the sender of the PLOGI or FLOGI frame is
requesting 2 power BB_SC_N number of frames to be
sent between two consecutive BB_SCs primitives, and
2 power BB_SC_N number of R_RDY primitives to be
sent between two consecutive BB_SCr primitives.
If 'true', the BB_SC_N mode is enabled.
If 'false', the BB_SC_N mode is disabled."
REFERENCE "FC-FS-2 Rev 1.90, Section 15.6.2.5 BB_SC_N."
DEFVAL { true }
::= { fcIfEntry 39 }
fcIfPortType OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
external(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this interface is internal orexternal
interface on the chassis.
internal(1) - This type of interface is not accessible via an
externally-mounted connector on the device
external(2) - This type of interface is accessible via an
externally-mounted connector on the device
Except on certain platforms, the interfaces are usually of the
fcIfPortType 'external'."
::= { fcIfEntry 40 }
-- fcTrunkIfTable.
fcTrunkIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each trunking fibre
channel port per VSAN. When the FC-port goes
into trunking mode, the fibre channel switch creates
one entry per FC-port for each active VSAN, from the
allowed VSAN list for this port.
The allowed VSAN list is configured using the objects,
fcIfAllowedVsanList2k and fcIfAllowedVsanList4k.
If an VSAN becomes inactive then the switch removes the
corresponding entries from this table, if they exist."
::= { cffFcFeConfig 3 }
fcTrunkIfEntry OBJECT-TYPE
SYNTAX FcTrunkIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains trunking FC-port parameters."
INDEX {
ifIndex,
vsanIndex
}
::= { fcTrunkIfTable 1 }
FcTrunkIfEntry ::= SEQUENCE {
fcTrunkIfOperStatus INTEGER,
fcTrunkIfOperStatusCause FcIfOperStatusReason,
fcTrunkIfOperStatusCauseDescr SnmpAdminString
}
fcTrunkIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of a VSAN on this port. If the port
is in trunking mode, it is possible that the port state
may be 'down(2)' only in some VSANs. If this port is down
in this VSAN only then port state shown by 'ifOperStatus'
may not be 'down(2)', but this object will show
'down(2)'.
The 'fcTrunkIfOperStatusCause' object shows the reason
for port being 'down(2)'."
::= { fcTrunkIfEntry 1 }
fcTrunkIfOperStatusCause OBJECT-TYPE
SYNTAX FcIfOperStatusReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cause of current operational state of the
port.
The current operational state of the port is shown by
the 'fcTrunkIfOperStatus'. This object will show
'none(2)' for all the 'fcTrunkIfOperStatus' values
except for 'down(2)'. It will show one of the values
from the 'FcIfOperStatusReason' textual convention
if 'fcTrunkIfOperStatus' is 'down(2)'."
::= { fcTrunkIfEntry 2 }
fcTrunkIfOperStatusCauseDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description for the cause of current operational
state of the port, shown by the object
'fcTrunkIfOperStatusCause'."
::= { fcTrunkIfEntry 3 }
-- The FC-Port Fabric Login Group
fcIfLoginEntryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of login entries in fcIfFLoginTable."
::= { cffFcFeConfig 4 }
-- fcIfFLoginTable
fcIfFLoginTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each Nx_Port
attached to a particular FC-port in this VSAN in the
Fabric element.
Each entry contains services parameters established
from the most recent Fabric Login, explicit or
implicit. In case of private devices attached to port,
the fabric switch does the login on behalf of the
private device. The fabric switch creates or deletes an
entry in this table.
Note: An FC-port may have one or more Nx_Port
logged-in to it."
::= { cffFcFeConfig 5 }
fcIfFLoginEntry OBJECT-TYPE
SYNTAX FcIfFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing service parameters established
by a successful Fabric Login to the port indicated
by ifIndex."
INDEX {
ifIndex,
vsanIndex,
fcIfNxLoginIndex
}
::= { fcIfFLoginTable 1 }
FcIfFLoginEntry ::= SEQUENCE {
fcIfNxLoginIndex Unsigned32,
fcIfNxPortNodeName FcNameId,
fcIfNxPortName FcNameId,
fcIfNxPortAddress FcAddressId,
fcIfNxFcphVersionAgreed FcphVersion,
fcIfNxRxBbCredit FcBbCredit,
fcIfNxTxBbCredit FcBbCredit,
fcIfNxClass2RxDataFieldSize FcRxDataFieldSize,
fcIfNxClass3RxDataFieldSize FcRxDataFieldSize,
fcIfNxCosSuppAgreed FcClassOfServices,
fcIfNxClass2SeqDelivAgreed TruthValue,
fcIfNxClass3SeqDelivAgreed TruthValue
}
fcIfNxLoginIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary value identifying the associated Nx_Port
in the attachment for which the entry contains
information."
::= { fcIfFLoginEntry 1 }
fcIfNxPortNodeName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The world wide name of the Remote Node the
logged-in Nx_Port belongs to."
::= { fcIfFLoginEntry 2 }
fcIfNxPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The world wide name of the logged-in Nx_Port."
::= { fcIfFLoginEntry 3 }
fcIfNxPortAddress OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address identifier that has been assigned to the
logged-in Nx_Port."
::= { fcIfFLoginEntry 4 }
fcIfNxFcphVersionAgreed OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of FC-PH that the Fx_Port has agreed to
support from the Fabric Login."
::= { fcIfFLoginEntry 5 }
fcIfNxRxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers available for
holding Class 2, Class 3 received from the logged-in
Nx_Port.
It is for buffer-to-buffer flow control in the
incoming direction from the logged-in Nx_Port to
FC-port."
::= { fcIfFLoginEntry 6 }
fcIfNxTxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of buffers available for holding
Class 2, Class 3 frames to be transmitted to
the logged-in Nx_Port.
It is for buffer-to-buffer flow control in the
direction from FC-Port to Nx_Port.
The buffer-to-buffer flow control mechanism is
indicated in the respective fcIfBbCreditModel."
::= { fcIfFLoginEntry 7 }
fcIfNxClass2RxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class 2 Receive Data Field Size of the logged-in
Nx_Port.
This object specifies the largest Data Field Size for
an FT_1 frame that can be received by the Nx_Port."
::= { fcIfFLoginEntry 8 }
fcIfNxClass3RxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class 3 Receive Data Field Size of the logged-in
Nx_Port.
This object specifies the largest Data Field Size for
an FT_1 frame that can be received by the Nx_Port."
::= { fcIfFLoginEntry 9 }
fcIfNxCosSuppAgreed OBJECT-TYPE
SYNTAX FcClassOfServices
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating the classes of services that
the logged-in Nx_Port has requested the FC-Port to
support and the FC-Port has granted the request."
::= { fcIfFLoginEntry 10 }
fcIfNxClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating whether the FC-Port has agreed
to support Class 2 sequential delivery during the
Fabric Login. This is meaningful only if Class 2
service has been agreed. This object is applicable only
to Fx_Ports."
::= { fcIfFLoginEntry 11 }
fcIfNxClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag indicating whether the Fx_Port has agreed to
support Class 3 sequential delivery during the Fabric
Login. This is meaningful only if Class 3 service has
been agreed. This object is applicable only to
Fx_Ports."
::= { fcIfFLoginEntry 12 }
-- fcIfElpTable
fcIfElpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfElpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each local
Interconnect_Port that has performed Exchange Link
Parameters Switch Fabric Internal Link Service
exchange with its peer Interconnect_Port.
Each entry contains Exchange Link Parameters
established from the most recent ELP exchange between
the 2 Interconnect_Port.
The agent creates and deletes each entry in this
table. The agent creates an entry in this table on a
successful completion of a ELP exchange. Similarly the
agent deletes the entry when the port goes down.
NOTE: Port Channel ports are not represented in
this table."
::= { cffFcFeConfig 6 }
fcIfElpEntry OBJECT-TYPE
SYNTAX FcIfElpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Exchange Link parameters
established between the Interconnect_Port indicated
by ifIndex and the peer Interconnect_Port indicated by
fcIfElpNbrPortName."
INDEX { ifIndex }
::= { fcIfElpTable 1 }
FcIfElpEntry ::= SEQUENCE {
fcIfElpNbrNodeName FcNameId,
fcIfElpNbrPortName FcNameId,
fcIfElpRxBbCredit FcBbCredit,
fcIfElpTxBbCredit FcBbCredit,
fcIfElpCosSuppAgreed FcClassOfServices,
fcIfElpClass2SeqDelivAgreed TruthValue,
fcIfElpClass2RxDataFieldSize FcRxDataFieldSize,
fcIfElpClass3SeqDelivAgreed TruthValue,
fcIfElpClass3RxDataFieldSize FcRxDataFieldSize,
fcIfElpClassFXII TruthValue,
fcIfElpClassFRxDataFieldSize FcRxDataFieldSize,
fcIfElpClassFConcurrentSeq Unsigned32,
fcIfElpClassFEndToEndCredit Unsigned32,
fcIfElpClassFOpenSeq Unsigned32
}
fcIfElpNbrNodeName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node world wide name of the peer Node."
::= { fcIfElpEntry 1 }
fcIfElpNbrPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port world wide name of the peer Interconnect_Port."
::= { fcIfElpEntry 2 }
fcIfElpRxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers available for
holding Class 2, Class 3, Class F frames received from
the peer Interconnect_Port.
It is for buffer-to-buffer flow control in the
incoming direction from the peer Interconnect_Port to
local Interconnect_Port.
The buffer-to-buffer flow control mechanism is
indicated in the respective fcIfBbCreditModel."
::= { fcIfElpEntry 3 }
fcIfElpTxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of buffers available for holding
Class 2, Class 3, Class F frames to be transmitted to
the peer Interconnect_Port.
It is for buffer-to-buffer flow control in the
direction from the local Interconnect_Port to
peer Interconnect_Port.
The buffer-to-buffer flow control mechanism is
indicated in the corresponding fcIfBbCreditModel."
::= { fcIfElpEntry 4 }
fcIfElpCosSuppAgreed OBJECT-TYPE
SYNTAX FcClassOfServices
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating the classes of services that
the peer Interconnect_Port has requested the local
Interconnect_Port to support and the local
Interconnect_Port has granted the request."
::= { fcIfElpEntry 5 }
fcIfElpClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating whether the local
Interconnect_Port has agreed to support Class 2
sequential delivery during the Exchange Link
Parameters Switch Fabric Internal Link Service
request. This is meaningful only if Class 2 service
has been agreed."
::= { fcIfElpEntry 6 }
fcIfElpClass2RxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class 2 Receive Data Field Size of the peer
Interconnect_Port.
This object specifies the largest Data Field Size for
an FT_1 frame that can be received by the
Interconnect_Port. This is meaningful only if Class 2
service has been agreed."
::= { fcIfElpEntry 7 }
fcIfElpClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating whether the local
Interconnect_Port has agreed to support Class 3
sequential delivery during the Exchange Link
Parameters Switch Fabric Internal Link Service
request. This is meaningful only if Class 3 service
has been agreed."
::= { fcIfElpEntry 8 }
fcIfElpClass3RxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class 3 Receive Data Field Size of the peer
Interconnect_Port.
This object specifies the largest Data Field Size for
an FT_1 frame that can be received by the
Interconnect_Port. This is meaningful only if Class 3
service has been agreed."
::= { fcIfElpEntry 9 }
fcIfElpClassFXII OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object when true(1) indicates that the peer
Interconnect_Port supplying this parameter requires
that an interlock be used during X_ID assignment in
Class F.
This is meaningful only if Class F service has been
agreed."
::= { fcIfElpEntry 10 }
fcIfElpClassFRxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class F Receive Data Field Size of the peer
Interconnect_Port. Class F service is always
agreed between two Interconnect_Ports, and thus
this object is always meaningful.
This object specifies the largest Data Field Size for
an FT_1 frame that can be received by the
Interconnect_Port."
::= { fcIfElpEntry 11 }
fcIfElpClassFConcurrentSeq OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating the number of sequence status
blocks provided by the Interconnect_Port supplying
the parameters for tracking the progress of a sequence
as a sequence recipient. The maximum number of
concurrent sequences that can be specified is 255. A
value of zero in this field is reserved."
::= { fcIfElpEntry 12 }
fcIfElpClassFEndToEndCredit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicating the maximum number of Class F
data frames which can be transmitted by an
Interconnect_Port without receipt of accompanying
ACK or Link_Response frames. The minimum value of
end-to-end credit is one. The end-to-end credit
field specified is associated with the number of
buffers available for holding the Data_Field of a
Class F frame and processing the contents of that
Data_Field by the Interconnect_Port supplying the
parameters."
::= { fcIfElpEntry 13 }
fcIfElpClassFOpenSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the open sequences per exchange shall
specify the maximum number of sequences that can be
open at one time at the recipient between a pair of
Interconnect_Ports for one exchange. This value is
used for exchange and sequence tracking."
::= { fcIfElpEntry 14 }
-- fcIfCapTable
fcIfCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each FC-Port.
It contains information describing about what each
FC-port is inherently capable in its current
configuration of operating or supporting.
Entries in this table are created/deleted on an
as-needed basis by the agent. This table shows the
capability of this port hardware as currently
configured.
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port
Channel ports are not represented in this table.
The recommended method to get the current capability
for the objects affected by the setting of
fcIfPortRateMode is to inspect the relevant objects in
whichever table corresponds to the value of
fcIfPortRateMode. As a result, the relevant objects in
this table have been deprecated."
::= { cffFcFeConfig 7 }
fcIfCapEntry OBJECT-TYPE
SYNTAX FcIfCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the Capability of a FC-Port."
INDEX { ifIndex }
::= { fcIfCapTable 1 }
FcIfCapEntry ::= SEQUENCE {
fcIfCapFcphVersionHigh FcphVersion,
fcIfCapFcphVersionLow FcphVersion,
fcIfCapRxBbCreditMax FcBbCredit,
fcIfCapRxBbCreditMin FcBbCredit,
fcIfCapRxDataFieldSizeMax FcRxDataFieldSize,
fcIfCapRxDataFieldSizeMin FcRxDataFieldSize,
fcIfCapCos FcClassOfServices,
fcIfCapClass2SeqDeliv TruthValue,
fcIfCapClass3SeqDeliv TruthValue,
fcIfCapHoldTimeMax MicroSeconds,
fcIfCapHoldTimeMin MicroSeconds,
fcIfCapISLRxBbCreditMax FcBbCredit,
fcIfCapISLRxBbCreditMin FcBbCredit,
fcIfCapRxBbCreditWriteable TruthValue,
fcIfCapRxBbCreditDefault FcBbCredit,
fcIfCapISLRxBbCreditDefault FcBbCredit,
fcIfCapBbScnCapable TruthValue,
fcIfCapBbScnMax Unsigned32,
fcIfCapOsmFrmCapable TruthValue,
fcIfIsServiceStateCapable TruthValue,
fcIfIsPortRateModeCapable TruthValue,
fcIfIsAdminRxBbCreditExtendedCapable TruthValue
}
fcIfCapFcphVersionHigh OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest version of FC-PH that the FC-Port is
capable of supporting."
::= { fcIfCapEntry 1 }
fcIfCapFcphVersionLow OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest version of FC-PH that the FC-Port is
capable of supporting."
::= { fcIfCapEntry 2 }
fcIfCapRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving
from the attached Nx_Port. This object is
applicable to ports operating in Fx mode."
::= { fcIfCapEntry 3 }
fcIfCapRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from
the attached Nx_Port. This object is applicable
to ports operating in Fx mode."
::= { fcIfCapEntry 4 }
fcIfCapRxDataFieldSizeMax OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port."
::= { fcIfCapEntry 5 }
fcIfCapRxDataFieldSizeMin OBJECT-TYPE
SYNTAX FcRxDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum size in bytes of the Data Field in a frame
that the FC-Port is capable of receiving from its
attached FC-port."
::= { fcIfCapEntry 6 }
fcIfCapCos OBJECT-TYPE
SYNTAX FcClassOfServices
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bit mask indicating the set of Classes of Service
that the FC-Port is capable of supporting."
::= { fcIfCapEntry 7 }
fcIfCapClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag indicating whether or not the FC-Port is
capable of supporting Class 2 Sequential Delivery."
::= { fcIfCapEntry 8 }
fcIfCapClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag indicating whether or not the FC-Port is
capable of supporting Class 3 Sequential Delivery."
::= { fcIfCapEntry 9 }
fcIfCapHoldTimeMax OBJECT-TYPE
SYNTAX MicroSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum holding time ( in microseconds ) that the
FC-Port is capable of supporting."
::= { fcIfCapEntry 10 }
fcIfCapHoldTimeMin OBJECT-TYPE
SYNTAX MicroSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum holding time ( in microseconds ) that the
FC-Port is capable of supporting."
::= { fcIfCapEntry 11 }
fcIfCapISLRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving from
the attached Inter Connect port. This object
is applicable to ports operating in xE_port mode."
::= { fcIfCapEntry 12 }
fcIfCapISLRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from the
attached xE_port or B_port. This object is
applicable to ports operating in xE_port mode."
::= { fcIfCapEntry 13 }
fcIfCapRxBbCreditWriteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value indicating whether the port is capable
of allowing the user to configure receive buffer to
buffer credit.
The values configured for the objects:
fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx will take effect
only if the value of this object is true(1),
otherwise the default values specified by the
objects: fcIfCapRxBbCreditDefault,
fcIfCapISLRxBbCreditDefault will stay in effect
depending on the operating mode of the port."
::= { fcIfCapEntry 14 }
fcIfCapRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in Fx mode."
::= { fcIfCapEntry 15 }
fcIfCapISLRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in xE_port mode."
::= { fcIfCapEntry 16 }
fcIfCapBbScnCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this interface is capable of
handling buffer-to-buffer state change number.
'true' : capable of handling.
'false' : it is not capable of handling it."
REFERENCE "FC-FS REV1_90 Section 15.6.2.5"
::= { fcIfCapEntry 17 }
fcIfCapBbScnMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum buffer-to-buffer state change number
this interface can handle."
::= { fcIfCapEntry 18 }
fcIfCapOsmFrmCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether this interface is
capable to operate in different port rate modes.
'true' : the port is capable of being configured
with the mode it is to operate in,
e.g., a port which can operate in over
subscription mode and full rate mode.
'false': the port rate mode cannot be changed.
If the value of this object is 'true' then the
fcIfCapOsmTable would show the values of the port
when it operates in over subscribed mode and
fcIfCapFrmTable would show the values when it
operates in full rate mode.
The currently configured mode is given by
fcIfPortRateMode."
::= { fcIfCapEntry 19 }
fcIfIsServiceStateCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this interface is capable of
handling service state change.
'true' : capable of changing the service state of the
interface. This means that the user can configure the
object fcIfServiceState on this interface.
'false' : not capable of a change in service state of the
interface. The user cannot configure the object
fcIfServiceState on this interface."
::= { fcIfCapEntry 20 }
fcIfIsPortRateModeCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this interface is capable of
being configured in either of 'dedicated' or
'shared' port rate modes.
'true' : capable of changing the port rate mode of the
interface. The user can configure the object
fcIfAdminPortRateMode.
'false' : not capable of changing the port rate mode of the
interface. The user cannot configure the object
fcIfAdminPortRateMode."
::= { fcIfCapEntry 21 }
fcIfIsAdminRxBbCreditExtendedCapable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether extended buffer-to-buffer credit
feature can be enabled on a given interface.
'true' : capable of changing the extended buffer-to-buffer
credits on the interface. The user can configure the
object fcIfAdminRxBbCreditExtended on this interface.
'false' : not capable of changing the extended buffer-to-buffer
credits on the interface. The user cannot configure
the object fcIfAdminRxBbCreditExtended on this
interface."
::= { fcIfCapEntry 22 }
adminTrunkProtocol OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to either enable or disable the trunking
protocol for the device. The trunking protocol is used
for negotiating trunk mode and calculating operational
VSANs on an EISL link. It also performs port VSAN
consistency checks. On non-trunking ISL links, if the
port VSANs are different, the E ports will be isolated.
To avoid this isolation, this MIB variable should be
set to 'disable(2)'.
enable(1) - enables trunking protocol.
disable (2) - disables the trunking protocol."
::= { cffFcFeConfig 8 }
fcIfElpRejectReasonCode OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason code for the ELP reject."
REFERENCE "FC-SW-2 REV 4.9 Section 6.1.2"
::= { cffFcFeConfig 9 }
fcIfElpRejectReasonCodeExpl OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason code explanation for the ELP reject."
REFERENCE "FC-SW-2 REV 4.9 Section 6.1.2"
::= { cffFcFeConfig 10 }
-- fcIfCapOsmTable
fcIfCapOsmTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfCapOsmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each FC-Port
which is capable of operating in over subscription port
rate mode.
It contains information describing about what each
FC-port is inherently capable of operating or
supporting in over subscription mode.
Entries in this table are created/deleted on an
as-needed basis by the agent.
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port
Channel ports are not represented in this table."
::= { cffFcFeConfig 11 }
fcIfCapOsmEntry OBJECT-TYPE
SYNTAX FcIfCapOsmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the Capability of a FC-Port
operating in over subscribed mode."
INDEX { ifIndex }
::= { fcIfCapOsmTable 1 }
FcIfCapOsmEntry ::= SEQUENCE {
fcIfCapOsmRxBbCreditWriteable TruthValue,
fcIfCapOsmRxBbCreditMax FcBbCredit,
fcIfCapOsmRxBbCreditMin FcBbCredit,
fcIfCapOsmRxBbCreditDefault FcBbCredit,
fcIfCapOsmISLRxBbCreditMax FcBbCredit,
fcIfCapOsmISLRxBbCreditMin FcBbCredit,
fcIfCapOsmISLRxBbCreditDefault FcBbCredit,
fcIfCapOsmRxPerfBufWriteable TruthValue,
fcIfCapOsmRxPerfBufMax FcPerfBuffer,
fcIfCapOsmRxPerfBufMin FcPerfBuffer,
fcIfCapOsmRxPerfBufDefault FcPerfBuffer,
fcIfCapOsmISLRxPerfBufMax FcPerfBuffer,
fcIfCapOsmISLRxPerfBufMin FcPerfBuffer,
fcIfCapOsmISLRxPerfBufDefault FcPerfBuffer
}
fcIfCapOsmRxBbCreditWriteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicating whether the port operating in over
subscribed mode is capable of allowing the user to
configure receive buffer to buffer credit.
The values configured for the objects:
fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx will take effect
only if the value of this object is true(1),
otherwise the default values specified by the
objects: fcIfCapOsmRxBbCreditDefault,
fcIfCapOsmISLRxBbCreditDefault will stay in effect
depending on the operating mode of the port."
::= { fcIfCapOsmEntry 1 }
fcIfCapOsmRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving
from the attached Nx_Port. This object is
applicable to ports operating in Fx mode. ."
::= { fcIfCapOsmEntry 2 }
fcIfCapOsmRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from
the attached Nx_Port. This object is applicable
to ports operating in Fx mode."
::= { fcIfCapOsmEntry 3 }
fcIfCapOsmRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in Fx mode."
::= { fcIfCapOsmEntry 4 }
fcIfCapOsmISLRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving from
the attached Inter Connect port. This object
is applicable to ports operating in inter switch
link mode."
::= { fcIfCapOsmEntry 5 }
fcIfCapOsmISLRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from the
attached xE_port or B_port. This object
is applicable to ports operating in inter switch
link mode."
::= { fcIfCapOsmEntry 6 }
fcIfCapOsmISLRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in inter switch link mode."
::= { fcIfCapOsmEntry 7 }
fcIfCapOsmRxPerfBufWriteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicating whether the port is capable
of allowing the user to configure receive performance
buffers.
The values configured for the objects:
fcIfAdminRxPerfBuffer will take effect
only if the value of this object is true(1),
otherwise the default values specified by the
objects: fcIfCapOsmRxPerfBufDefault,
fcIfCapOsmISLRxPerfBufDefault will stay in effect
depending on the operating mode of the port."
::= { fcIfCapOsmEntry 8 }
fcIfCapOsmRxPerfBufMax OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of performance buffers that can be
configured for this port. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapOsmEntry 9 }
fcIfCapOsmRxPerfBufMin OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of performance buffers that can be
configured for this port. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapOsmEntry 10 }
fcIfCapOsmRxPerfBufDefault OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default performance buffers if the port is
operating in Fx mode. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapOsmEntry 11 }
fcIfCapOsmISLRxPerfBufMax OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of performance buffers that can be
configured for this port. This object is applicable to
inter switch link ports."
::= { fcIfCapOsmEntry 12 }
fcIfCapOsmISLRxPerfBufMin OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of performance buffers that can be
configured for this port. This object is applicable to
inter switch link ports."
::= { fcIfCapOsmEntry 13 }
fcIfCapOsmISLRxPerfBufDefault OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default performance buffers if the port is
operating as an inter switch link port."
::= { fcIfCapOsmEntry 14 }
-- fcIfCapFrmTable
fcIfCapFrmTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfCapFrmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each FC-Port
which is capable of operating in Full Rate mode.
It contains information describing about what each
FC-port is inherently capable of operating or
supporting in full rate mode.
Entries in this table are created/deleted on an
as-needed basis by the agent.
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port
Channel ports are not represented in this table."
::= { cffFcFeConfig 12 }
fcIfCapFrmEntry OBJECT-TYPE
SYNTAX FcIfCapFrmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the Capability of a FC-Port
operating in Full Rate mode."
INDEX { ifIndex }
::= { fcIfCapFrmTable 1 }
FcIfCapFrmEntry ::= SEQUENCE {
fcIfCapFrmRxBbCreditWriteable TruthValue,
fcIfCapFrmRxBbCreditMax FcBbCredit,
fcIfCapFrmRxBbCreditMin FcBbCredit,
fcIfCapFrmRxBbCreditDefault FcBbCredit,
fcIfCapFrmISLRxBbCreditMax FcBbCredit,
fcIfCapFrmISLRxBbCreditMin FcBbCredit,
fcIfCapFrmISLRxBbCreditDefault FcBbCredit,
fcIfCapFrmRxPerfBufWriteable TruthValue,
fcIfCapFrmRxPerfBufMax FcPerfBuffer,
fcIfCapFrmRxPerfBufMin FcPerfBuffer,
fcIfCapFrmRxPerfBufDefault FcPerfBuffer,
fcIfCapFrmISLRxPerfBufMax FcPerfBuffer,
fcIfCapFrmISLRxPerfBufMin FcPerfBuffer,
fcIfCapFrmISLRxPerfBufDefault FcPerfBuffer
}
fcIfCapFrmRxBbCreditWriteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicating whether the port operating in full
rate mode is capable of allowing the user to
configure receive buffer to buffer credit.
The values configured for the objects:
fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx will take effect
only if the value of this object is true(1),
otherwise the default values specified by the
objects: fcIfCapFrmRxBbCreditDefault,
fcIfCapFrmISLRxBbCreditDefault will stay in effect
depending on the operating mode of the port."
::= { fcIfCapFrmEntry 1 }
fcIfCapFrmRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving
from the attached Nx_Port. This object is
applicable to ports operating in Fx mode."
::= { fcIfCapFrmEntry 2 }
fcIfCapFrmRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from
the attached Nx_Port. This object is applicable
to ports operating in Fx mode."
::= { fcIfCapFrmEntry 3 }
fcIfCapFrmRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in Fx mode."
::= { fcIfCapFrmEntry 4 }
fcIfCapFrmISLRxBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers the port
hardware is capable of receiving from
the attached Inter Connect port. This object
is applicable to ports operating in inter switch
link mode."
::= { fcIfCapFrmEntry 5 }
fcIfCapFrmISLRxBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers the port
hardware is capable of receiving from the
attached xE_port or B_port. This object
is applicable to ports operating in inter switch
link mode."
::= { fcIfCapFrmEntry 6 }
fcIfCapFrmISLRxBbCreditDefault OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default receive buffer-to-buffer credits if
the port is operating in inter switch link mode."
::= { fcIfCapFrmEntry 7 }
fcIfCapFrmRxPerfBufWriteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicating whether the port is capable
of allowing the user to configure receive performance
buffers.
The values configured for the objects:
fcIfAdminRxPerfBuffer will take effect
only if the value of this object is true(1),
otherwise the default values specified by the
objects: fcIfCapFrmRxPerfBufDefault,
fcIfCapFrmISLRxPerfBufDefault will stay in effect
depending on the operating mode of the port."
::= { fcIfCapFrmEntry 8 }
fcIfCapFrmRxPerfBufMax OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of performance buffers that can be
configured for this port. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapFrmEntry 9 }
fcIfCapFrmRxPerfBufMin OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of performance buffers that can be
configured for this port. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapFrmEntry 10 }
fcIfCapFrmRxPerfBufDefault OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default performance buffers if the port is
operating in Fx mode. The object is applicable to
ports operating in Fx mode."
::= { fcIfCapFrmEntry 11 }
fcIfCapFrmISLRxPerfBufMax OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of performance buffers that can be
configured for this port. This object is applicable to
inter switch link ports."
::= { fcIfCapFrmEntry 12 }
fcIfCapFrmISLRxPerfBufMin OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of performance buffers that can be
configured for this port. This object is applicable to
inter switch link ports."
::= { fcIfCapFrmEntry 13 }
fcIfCapFrmISLRxPerfBufDefault OBJECT-TYPE
SYNTAX FcPerfBuffer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default performance buffers if the port is
operating as an inter switch link port."
::= { fcIfCapFrmEntry 14 }
-- fcIfRNIDInfoTable
fcIfRNIDInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfRNIDInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing the peer node identification data per
port per VSAN."
::= { cffFcFeConfig 13 }
fcIfRNIDInfoEntry OBJECT-TYPE
SYNTAX FcIfRNIDInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides node identification data of the
peer. This data is got through performing
request-node-identification-data(RNID) extended link
service. The table would have entry for each port,
identified by ifIndex, on this VSAN, identified by
vsanIndex.
This table would hold entries only for physical FC
ports, FC port channel ports and FCIP ports."
REFERENCE "FC-SB-3 rev 1.6, Section 6.3.8."
INDEX {
ifIndex,
vsanIndex
}
::= { fcIfRNIDInfoTable 1 }
FcIfRNIDInfoEntry ::= SEQUENCE {
fcIfRNIDInfoStatus INTEGER,
fcIfRNIDInfoTypeNumber SnmpAdminString,
fcIfRNIDInfoModelNumber SnmpAdminString,
fcIfRNIDInfoManufacturer SnmpAdminString,
fcIfRNIDInfoPlantOfMfg SnmpAdminString,
fcIfRNIDInfoSerialNumber SnmpAdminString,
fcIfRNIDInfoUnitType INTEGER,
fcIfRNIDInfoPortId Integer32
}
fcIfRNIDInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2),
old(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of the row,
is valid, invalid or old.
The only value that can be assigned by the Network
Management System(NMS) is invalid(2). The NMS
cannot set this object to any other value (i.e valid
(1) or old(3) )."
::= { fcIfRNIDInfoEntry 1 }
fcIfRNIDInfoTypeNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type number of the peer node. For example the type
number could be 002105."
::= { fcIfRNIDInfoEntry 2 }
fcIfRNIDInfoModelNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The model number of the peer node. For example the model
number could be F20."
::= { fcIfRNIDInfoEntry 3 }
fcIfRNIDInfoManufacturer OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the the company that manufactured the
peer node. For example the Manufacturer info could be
HTC."
::= { fcIfRNIDInfoEntry 4 }
fcIfRNIDInfoPlantOfMfg OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The plant code that identifies the plant
of manufacture of the peer node. For example the plant
code of manufacture could be 00."
::= { fcIfRNIDInfoEntry 5 }
fcIfRNIDInfoSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number assigned to the peer node during
manufacturing. For example the serial number could be
000000023053."
::= { fcIfRNIDInfoEntry 6 }
fcIfRNIDInfoUnitType OBJECT-TYPE
SYNTAX INTEGER {
channel(1),
controlUnit(2),
fabric(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the peer node that this port
is communicating.
channel - Host
controlUnit - Disk
fabric - Another SAN switch
unknown - if fcIfRNIDInfoStatus is 'invalid' this
would be unknown."
::= { fcIfRNIDInfoEntry 7 }
fcIfRNIDInfoPortId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the port in the peer node connected
to this port.
If the peer node is a channel, as described
by the instance of fcIfRNIDInfoUnitType, then
fcIfRNIDInfoPortId will be the CHPID (Channel
Path Identifier) of the channel path that
contains the port in the peer node connected to this
port.
If the peer node is controlUnit, then
fcIfRNIDInfoPortId will be 0.
If the peer node is fabric, then
fcIfRNIDInfoPortId will be port address of the port in
peer node connected to this port."
::= { fcIfRNIDInfoEntry 8 }
-- Port channel Information for gigabit ethernet interfaces
-- in the fibre channel switch.
fcIfGigETable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfGigEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry per fibre channel switch
Gigabit Ethernet (GigE) interface.
This table also provides an easy way to find out
whether a GigE interface is part of an port
channel or not.
The table is indexed by the 'ifIndex' of the GigE
port in the fiber channel switch."
::= { cffFcFeConfig 14 }
fcIfGigEEntry OBJECT-TYPE
SYNTAX FcIfGigEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains GigE port configuration and
state information."
INDEX { ifIndex }
::= { fcIfGigETable 1 }
FcIfGigEEntry ::= SEQUENCE {
fcIfGigEPortChannelIfIndex InterfaceIndexOrZero,
fcIfGigEAutoNegotiate INTEGER,
fcIfGigEBeaconMode TruthValue,
fcIfGigConnectorType FcPortModuleTypes
}
fcIfGigEPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the ether channel port this GigE port
belongs to.
A value of zero indicates that this GigE port is not
part of any port channel.
For port channel port this object will have the ifIndex
of the port channel port itself."
::= { fcIfGigEEntry 1 }
fcIfGigEAutoNegotiate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object Indicates whether auto-negotiation
(of speed and duplex mode) should be used on this
interface."
DEFVAL { enabled }
::= { fcIfGigEEntry 2 }
fcIfGigEBeaconMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In Beacon mode, an interface LED is put into flashing
mode for easy identification of a particular
interface. The Beacon mode configured by the user.
If 'true', the Beacon mode is enabled.
If 'false', the beacon mode is disabled."
DEFVAL { true }
::= { fcIfGigEEntry 3 }
fcIfGigConnectorType OBJECT-TYPE
SYNTAX FcPortModuleTypes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module type of the port connector.
Since this is a characteristic of a physical port, this
object is not applicable for Port Channel ports, i.e.,
the value is instantiated but its value is irrelevant."
::= { fcIfGigEEntry 4 }
fcIfModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent)."
::= { cffFcFeConfig 15 }
fcIfModuleEntry OBJECT-TYPE
SYNTAX FcIfModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in fcIfModuleTable. Each entry represents the module
specific attributes."
INDEX { entPhysicalIndex }
::= { fcIfModuleTable 1 }
FcIfModuleEntry ::= SEQUENCE {
fcIfModuleOverSubscriptionRatioConfig INTEGER,
fcIfModuleBandwidthFairnessConfig INTEGER,
fcIfModuleBandwidthFairnessOper INTEGER,
fcIfModuleXcvrFrequencyConfig INTEGER
}
fcIfModuleOverSubscriptionRatioConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object helps the user to control the restriction on
oversubscription ratio on modules that support it.
enable(1) - Enables the restriction on oversubscription ratio
disable(2) - Disables the restriction on oversubscription ratio
By default, the restriction on oversubscription ratio is
enabled. If the user configures this object to disable (2), all
the interfaces on the module are capable of operating at
maximum
admin speed, given by fcIfAdminSpeed, regardless of the
available bandwidth."
::= { fcIfModuleEntry 1 }
fcIfModuleBandwidthFairnessConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object helps the user to control bandwidth fairness on
modules that support it.
enable(1) - Enables the bandwidth fairness
disable(2) - Disables the bandwidth fairness
By default, bandwidth fairness is enabled for a module. If the
user configures this object to disable (2), fair bandwidth
provisioning will not be guaranteed for interfaces with
fcIfPortRadeMode equal to 'dedicated'."
::= { fcIfModuleEntry 2 }
fcIfModuleBandwidthFairnessOper OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of bandwidth fairness on the module.
enabled(1) - Bandwidth fairness is enabled on the module
disabled(2) - Bandwidth fairness is disabled on the module"
::= { fcIfModuleEntry 3 }
fcIfModuleXcvrFrequencyConfig OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
xcvrFreqX2FC(2),
xcvrFreqX2Eth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the transceiver frequency of this
module.
notApplicable(1) - This value is read-only and is always
returned for module which does not
support this configuration.
xcvrFreqX2FC(2) - Sets the object to 10G FC transceiver
frequency.
xcvrFreqX2Eth(3) - Sets the object to 10G Ethernet
transceiver frequency."
REFERENCE "IEEE Std 802.3ae, ANSI 10GFC Rev 4.0"
::= { fcIfModuleEntry 4 }
fcIfToggleCtrlConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfToggleCtrlConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one entry per fibre channel interface. In
certain scenarios, when an interface in a system transitions to
a down state, it is likely for the interface to keep toggling
and flapping between up and down states continuously. The
objects in each entry of this table help in controlling such
behaviour on an interface by stopping such frequent transitions
and holding the interface in down state, if a stipulated number
of such toggles happen in a given duration, as described in the
objects."
::= { cffFcFeConfig 16 }
fcIfToggleCtrlConfigEntry OBJECT-TYPE
SYNTAX FcIfToggleCtrlConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the fcIfToggleCtrlConfigTable."
INDEX { ifIndex }
::= { fcIfToggleCtrlConfigTable 1 }
FcIfToggleCtrlConfigEntry ::= SEQUENCE {
fcIfToggleCtrlConfigEnable TruthValue,
fcIfToggleCtrlConfigReason INTEGER,
fcIfToggleCtrlConfigDuration Unsigned32,
fcIfToggleCtrlConfigNumFlaps Unsigned32
}
fcIfToggleCtrlConfigEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies if an interface can be stopped from
toggling between up and down states or allowed to toggle
continuously.
If 'true', the interface will be stopped from toggling
between up and down states.
If 'false', the interface will be allowed to toggle
continuously."
::= { fcIfToggleCtrlConfigEntry 1 }
fcIfToggleCtrlConfigReason OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
linkFailure(2)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the reason for which a port can
be allowed to toggle between up and down states.
notApplicable (1) - this reason is displayed when
fcIfToggleCtrlConfigEnable is 'false'.
linkFailure (2) - physical link failure."
::= { fcIfToggleCtrlConfigEntry 2 }
fcIfToggleCtrlConfigDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..2000000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the time duration in which the port is
allowed to toggle as many as the number of times given by
fcIfToggleCtrlConfigNumFlaps. When fcIfToggleCtrlConfigEnable
is 'false', this object does not take effect and its value
cannot be changed."
::= { fcIfToggleCtrlConfigEntry 3 }
fcIfToggleCtrlConfigNumFlaps OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the number of times a port can flap in
the duration given by fcIfToggleCtrlConfigDuration. When
fcIfToggleCtrlConfigEnable is 'false', this object does not
take effect and its value cannot be changed."
::= { fcIfToggleCtrlConfigEntry 4 }
fcIfFlapCtrlConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfFlapCtrlConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In certain scenarios, when an interface in a system
transitions to a down state due to a particular reason, it is
likely for the interface to keep flapping between up and down
states continuously. The objects in each entry of this table
help in controlling such behaviour on an interface by stopping
such frequent transitions and holding the interface in down
state, if a stipulated number of such toggles happen in a given
duration, as described in the objects.
Per each reason for which the interface flaps, an entry in this
table can be used to configure the following: whether or not
the flapping should be controlled on the interface, the allowed
number of flaps and the allowed duration before the interface
is held in down state."
::= { cffFcFeConfig 17 }
fcIfFlapCtrlConfigEntry OBJECT-TYPE
SYNTAX FcIfFlapCtrlConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the fcIfFlapCtrlConfigTable."
INDEX {
fcIfFlapCtrlConfigReason,
ifIndex
}
::= { fcIfFlapCtrlConfigTable 1 }
FcIfFlapCtrlConfigEntry ::= SEQUENCE {
fcIfFlapCtrlConfigReason INTEGER,
fcIfFlapCtrlConfigEnable TruthValue,
fcIfFlapCtrlConfigDuration Unsigned32,
fcIfFlapCtrlConfigNumFlaps Unsigned32
}
fcIfFlapCtrlConfigReason OBJECT-TYPE
SYNTAX INTEGER {
linkFailure(1),
trustSecViolation(2),
bitErrorRate(3),
signalLoss(4),
syncLoss(5),
linkReset(6),
creditLoss(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the reason for which a port can
be allowed to toggle between up and down states.
linkFailure (1) - physical link failure.
trustSecViolation (2) - Cisco Trusted Security violation.
bitErrorRate (3) - bit error rate threshold exceeded.
signalLoss (4) - link failure due to loss of signal.
syncLoss (5) - link failure due to loss of sync.
linkReset (6) - link failure due to link reset.
creditLoss (7) - link failure due to excessive credit
loss indications."
::= { fcIfFlapCtrlConfigEntry 1 }
fcIfFlapCtrlConfigEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if an interface can be stopped from
toggling between up and down states or allowed to toggle
continuously.
If 'true', the interface will be stopped from toggling
between up and down states.
If 'false', the interface will be allowed to toggle
continuously."
::= { fcIfFlapCtrlConfigEntry 2 }
fcIfFlapCtrlConfigDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..2000000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time duration in which the port is
allowed to toggle as many as the number of times given by
fcIfFlapCtrlConfigNumFlaps. When fcIfFlapCtrlConfigEnable
is 'false', this object does not take effect and its value
cannot be changed."
::= { fcIfFlapCtrlConfigEntry 3 }
fcIfFlapCtrlConfigNumFlaps OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of times a port can flap in
the duration given by fcIfFlapCtrlConfigDuration. When
fcIfFlapCtrlConfigEnable is 'false', this object does not
take effect and its value cannot be changed."
::= { fcIfFlapCtrlConfigEntry 4 }
-- fcIfErrorTable
fcIfErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each fabric
channel port( including any Port Channel ports ). It
contains counters that record the errors detected.
This table is an extension to interfaces group defined
in IF-MIB. It contains additional errors specific
to this device."
::= { cffFcFeStatistics 1 }
fcIfErrorEntry OBJECT-TYPE
SYNTAX FcIfErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains error counters of a fabric
channel port."
INDEX { ifIndex }
::= { fcIfErrorTable 1 }
FcIfErrorEntry ::= SEQUENCE {
fcIfLinkFailures Counter32,
fcIfSyncLosses Counter32,
fcIfSigLosses Counter32,
fcIfPrimSeqProtoErrors Counter32,
fcIfInvalidTxWords Counter32,
fcIfInvalidCrcs Counter32,
fcIfDelimiterErrors Counter32,
fcIfAddressIdErrors Counter32,
fcIfLinkResetIns Counter32,
fcIfLinkResetOuts Counter32,
fcIfOlsIns Counter32,
fcIfOlsOuts Counter32,
fcIfRuntFramesIn Counter32,
fcIfJabberFramesIn Counter32,
fcIfTxWaitCount Counter32,
fcIfFramesTooLong Counter32,
fcIfFramesTooShort Counter32,
fcIfLRRIn Counter32,
fcIfLRROut Counter32,
fcIfNOSIn Counter32,
fcIfNOSOut Counter32,
fcIfFragFrames Counter32,
fcIfEOFaFrames Counter32,
fcIfUnknownClassFrames Counter32,
fcIf8b10bDisparityErrors Counter32,
fcIfFramesDiscard Counter32,
fcIfELPFailures Counter32,
fcIfBBCreditTransistionFromZero Counter32,
fcIfEISLFramesDiscard Counter32,
fcIfFramingErrorFrames Counter32,
fcIfLipF8In Counter32,
fcIfLipF8Out Counter32,
fcIfNonLipF8In Counter32,
fcIfNonLipF8Out Counter32,
fcIfTimeOutDiscards Counter64,
fcIfOutDiscards Counter64,
fcIfCreditLoss Counter64,
fcIfTxWtAvgBBCreditTransitionToZero Counter64
}
fcIfLinkFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link failures detected by the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 29.3.1"
::= { fcIfErrorEntry 1 }
fcIfSyncLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of loss of synchronization failures
detected by the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 12.1.3.1"
::= { fcIfErrorEntry 2 }
fcIfSigLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of signal losses detected by the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 12.1.3.4"
::= { fcIfErrorEntry 3 }
fcIfPrimSeqProtoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of primitive sequence protocol errors
detected by the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 29.3.3"
::= { fcIfErrorEntry 4 }
fcIfInvalidTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid transmission words detected by
the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 12.1.3.1"
::= { fcIfErrorEntry 5 }
fcIfInvalidCrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid CRCs detected by the FC-Port.
Loop ports should not count CRC errors passing
through when monitoring."
REFERENCE "FC-PH REV 4.3 Section 29.8"
::= { fcIfErrorEntry 6 }
fcIfDelimiterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Delimiter Errors detected by the
FC-Port."
REFERENCE "FC-PH REV 4.3 Section 29.9"
::= { fcIfErrorEntry 7 }
fcIfAddressIdErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of address identifier errors detected by
the FC-Port."
REFERENCE "FC-PH REV 4.3 Section 29.9"
::= { fcIfErrorEntry 8 }
fcIfLinkResetIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link reset protocol errors received by
the FC-Port from the attached FC-port."
REFERENCE "FC-PH REV 4.3 Section 29.4"
::= { fcIfErrorEntry 9 }
fcIfLinkResetOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link reset protocol errors issued by
the FC-Port to the attached FC-Port."
REFERENCE "FC-PH REV 4.3 Section 29.4"
::= { fcIfErrorEntry 10 }
fcIfOlsIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence errors received by the
FC-Port."
REFERENCE "FC-PH REV 4.3 Section 16.4.3"
::= { fcIfErrorEntry 11 }
fcIfOlsOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence errors issued by the
FC-Port."
REFERENCE "FC-PH REV 4.3 Section 16.4.3"
::= { fcIfErrorEntry 12 }
fcIfRuntFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the FC-port that are
shorter than the minimum allowable frame length
regardless if the CRC is good or not."
::= { fcIfErrorEntry 13 }
fcIfJabberFramesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the FC-port that are
longer than a maximum frame length and also have a
CRC error."
::= { fcIfErrorEntry 14 }
fcIfTxWaitCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the FC-port waited due to lack of
transmit credits."
::= { fcIfErrorEntry 15 }
fcIfFramesTooLong OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the FC-port where
the frame length was greater than what was agreed to
in FLOGI/PLOGI. This could be caused by losing the
end of frame delimiter."
::= { fcIfErrorEntry 16 }
fcIfFramesTooShort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the FC-port where
the frame length was less than the minimum indicated
by the frame header (normally 24 bytes), but it could
be more if the DFCTL field indicates an optional
header should be present."
::= { fcIfErrorEntry 17 }
fcIfLRRIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link reset responses received by the
FC-port."
REFERENCE "FC-PH REV 4.3 Section 16.4.5"
::= { fcIfErrorEntry 18 }
fcIfLRROut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link reset responses transmitted
by the FC-port."
REFERENCE "FC-PH REV 4.3 Section 16.4.5"
::= { fcIfErrorEntry 19 }
fcIfNOSIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-operational sequences received by
the FC-port."
REFERENCE "FC-PH REV 4.3 Section 16.4.2"
::= { fcIfErrorEntry 20 }
fcIfNOSOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-operational sequences transmitted
by the FC-port."
REFERENCE "FC-PH REV 4.3 Section 16.4.2"
::= { fcIfErrorEntry 21 }
fcIfFragFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fragmented frames received by the
FC-port."
::= { fcIfErrorEntry 22 }
fcIfEOFaFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by FC-port with
EOF aborts."
REFERENCE "FC-PH REV 4.3 Section 17.6.3"
::= { fcIfErrorEntry 23 }
fcIfUnknownClassFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unknown class frames received by
FC-port."
::= { fcIfErrorEntry 24 }
fcIf8b10bDisparityErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8b10b disparity errors."
::= { fcIfErrorEntry 25 }
fcIfFramesDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded by the FC-port."
::= { fcIfErrorEntry 26 }
fcIfELPFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Exchange Link Parameters Switch Fabric
Internal Link service request failures detected by the
FC-Port. This object is applicable to only
Interconnect_Port, which are E_Port or B_Port."
REFERENCE "FC-PH REV 4.3 Section 29.3.1"
::= { fcIfErrorEntry 27 }
fcIfBBCreditTransistionFromZero OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions of BB credit
out of zero state."
::= { fcIfErrorEntry 28 }
fcIfEISLFramesDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Enhanced Inter Switch Link (EISL) frames
discarded by the FC-port. EISL frames carry an EISL
header containing VSAN among other information."
::= { fcIfErrorEntry 29 }
fcIfFramingErrorFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of framing errors. This denotes that the
FC-port detected an inconsistency of frame structure."
::= { fcIfErrorEntry 30 }
fcIfLipF8In OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'F8' (LIP(F8,x)) type of Loop failures -
Loop Initialization Primitive Sequence (LIP) errors
received by the FC-Port from the attached FC-port."
REFERENCE "FC-FS Rev 1.90 Section 5.5.4, and FC-AL-2."
::= { fcIfErrorEntry 31 }
fcIfLipF8Out OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'F8' (LIP(F8,x)) type of Loop failures -
Loop Initialization Primitive Sequence (LIP) errors
issued by the FC-Port to the attached FC-Port."
REFERENCE "FC-FS Rev 1.90 Section 5.5.4, and FC-AL-2."
::= { fcIfErrorEntry 32 }
fcIfNonLipF8In OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Non 'F8' (LIP(F8,x)) type of Loop
failures - Loop Initialization Primitive Sequence
(LIP) errors received by the FC-Port from the
attached FC-port."
REFERENCE "FC-FS Rev 1.90 Section 5.5.4, and FC-AL-2."
::= { fcIfErrorEntry 33 }
fcIfNonLipF8Out OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Non 'F8' (LIP(F8,x)) type of Loop
failures - Loop Initialization Primitive Sequence
(LIP) errors issued by the FC-Port to the attached
FC-Port."
REFERENCE "FC-FS Rev 1.90 Section 5.5.4, and FC-AL-2."
::= { fcIfErrorEntry 34 }
fcIfTimeOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that are dropped due to time-out
at the FC-port or due to the FC-port going offline."
::= { fcIfErrorEntry 35 }
fcIfOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that are discarded in the
egress side of the FC-port."
::= { fcIfErrorEntry 36 }
fcIfCreditLoss OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link reset has occurred due to unavailable
credits from the peer side of the link."
::= { fcIfErrorEntry 37 }
fcIfTxWtAvgBBCreditTransitionToZero OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times average buffer-to-buffer credits
at an FC-port has transitioned to zero."
::= { fcIfErrorEntry 38 }
-- fcIfC2AccountingTable .
fcIfC2AccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfC2AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each F, FL or TL
ports in the fabric element, including Port Channel
ports. It contains Class 2 accounting information."
::= { cffFcFeStatistics 2 }
fcIfC2AccountingEntry OBJECT-TYPE
SYNTAX FcIfC2AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains Class 2 accounting information for
each F, FL or TL port."
INDEX { ifIndex }
::= { fcIfC2AccountingTable 1 }
FcIfC2AccountingEntry ::= SEQUENCE {
fcIfC2InFrames Counter64,
fcIfC2OutFrames Counter64,
fcIfC2InOctets Counter64,
fcIfC2OutOctets Counter64,
fcIfC2Discards Counter32,
fcIfC2FbsyFrames Counter32,
fcIfC2FrjtFrames Counter32,
fcIfC2PBSYFrames Counter32,
fcIfC2PRJTFrames Counter32
}
fcIfC2InFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received by this port from
its attached Nx_Port."
::= { fcIfC2AccountingEntry 1 }
fcIfC2OutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames delivered through this
port to its attached Nx_Port."
::= { fcIfC2AccountingEntry 2 }
fcIfC2InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, received by this port from its attached
Nx_Port."
::= { fcIfC2AccountingEntry 3 }
fcIfC2OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, delivered through this port to its attached
Nx_Port."
::= { fcIfC2AccountingEntry 4 }
fcIfC2Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames discarded by this port."
::= { fcIfC2AccountingEntry 5 }
fcIfC2FbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_BSY frames generated by this port
against Class 2 frames."
REFERENCE "FC-PH REV 4.3 Section 20.3.3.1"
::= { fcIfC2AccountingEntry 6 }
fcIfC2FrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_RJT frames generated by this port
against Class 2 frames."
REFERENCE "FC-PH REV 4.3 Section 20.3.3.3"
::= { fcIfC2AccountingEntry 7 }
fcIfC2PBSYFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that port busy was returned to
this port as result of a class 2 frame that could not
be delivered to the other end of the link. This
occurs if the destination Nx_Port is temporarily busy.
PBSY can only occur on SOFc1 frames ( the frames that
establish a connection )."
REFERENCE "FC-PH REV 4.3 Section 29.9.2"
::= { fcIfC2AccountingEntry 8 }
fcIfC2PRJTFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that port reject was returned to
this port as a result of a class 2 frame that was
rejected at the destination Nx_Port."
REFERENCE "FC-PH REV 4.3 Section 29.9.2"
::= { fcIfC2AccountingEntry 9 }
-- fcIfC3AccountingTable
fcIfC3AccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfC3AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains, one entry for each F, FL or TL
ports in the fabric element, including Port Channel
ports. It contains Class 3 accounting information."
::= { cffFcFeStatistics 3 }
fcIfC3AccountingEntry OBJECT-TYPE
SYNTAX FcIfC3AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains Class 3 accounting information for
each F, FL or TL port."
INDEX { ifIndex }
::= { fcIfC3AccountingTable 1 }
FcIfC3AccountingEntry ::= SEQUENCE {
fcIfC3InFrames Counter64,
fcIfC3OutFrames Counter64,
fcIfC3InOctets Counter64,
fcIfC3OutOctets Counter64,
fcIfC3Discards Counter32
}
fcIfC3InFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received by this port
from its attached Nx_Port."
::= { fcIfC3AccountingEntry 1 }
fcIfC3OutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames transmitted by this
port to its attached Nx_Port."
::= { fcIfC3AccountingEntry 2 }
fcIfC3InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the
frame delimiters, received by this port from its
attached Nx_Port."
::= { fcIfC3AccountingEntry 3 }
fcIfC3OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the
frame delimiters, transmitted by this port to its a
attached Nx_Port."
::= { fcIfC3AccountingEntry 4 }
fcIfC3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames discarded by this port."
::= { fcIfC3AccountingEntry 5 }
-- fcIfCfAccountingTable
fcIfCfAccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfCfAccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each
Interconnect_Ports (xE_port, B_port) in the fabric
element, including Port Channel ports.
It contains Class F accounting information."
::= { cffFcFeStatistics 4 }
fcIfCfAccountingEntry OBJECT-TYPE
SYNTAX FcIfCfAccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class F accounting information for
each xE_port."
INDEX { ifIndex }
::= { fcIfCfAccountingTable 1 }
FcIfCfAccountingEntry ::= SEQUENCE {
fcIfCfInFrames Counter64,
fcIfCfOutFrames Counter64,
fcIfCfInOctets Counter64,
fcIfCfOutOctets Counter64,
fcIfCfDiscards Counter32
}
fcIfCfInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames received by this port."
::= { fcIfCfAccountingEntry 1 }
fcIfCfOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames transmitted by this
port."
::= { fcIfCfAccountingEntry 2 }
fcIfCfInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frame octets, including the
frame delimiters, received by this port from its
attached Nx_Port."
::= { fcIfCfAccountingEntry 3 }
fcIfCfOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frame octets, including the
frame delimiters, transmitted by this port to its a
attached Nx_Port."
::= { fcIfCfAccountingEntry 4 }
fcIfCfDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames discarded by this port."
::= { fcIfCfAccountingEntry 5 }
-- fcIfStatTable
fcIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each
physical fibre channel port.
It contains statistics information."
::= { cffFcFeStatistics 5 }
fcIfStatEntry OBJECT-TYPE
SYNTAX FcIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing statistics information for
each fibre channel port."
INDEX { ifIndex }
::= { fcIfStatTable 1 }
FcIfStatEntry ::= SEQUENCE {
fcIfCurrRxBbCredit FcBbCredit,
fcIfCurrTxBbCredit FcBbCredit
}
fcIfCurrRxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of receive buffer-to-buffer credits
for this port."
::= { fcIfStatEntry 1 }
fcIfCurrTxBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of transmit buffer-to-buffer credits
for this port."
::= { fcIfStatEntry 2 }
-- Notifications
fcTrunkIfDownNotify NOTIFICATION-TYPE
OBJECTS {
fcTrunkIfOperStatus,
fcTrunkIfOperStatusCause,
fcTrunkIfOperStatusCauseDescr
}
STATUS current
DESCRIPTION
"This notification is generated by the agent
whenever the fcTrunkifOperStatus object for this
trunk interface is about to enter the down state from
some other state. This other state is indicated by
the included value of fcTrunkifOperStatus."
::= { cffFcFeNotifications 1 }
fcTrunkIfUpNotify NOTIFICATION-TYPE
OBJECTS {
fcTrunkIfOperStatus,
fcTrunkIfOperStatusCause,
fcTrunkIfOperStatusCauseDescr
}
STATUS current
DESCRIPTION
"This notification is generated by the agent
whenever the fcTrunkifOperStatus object for one of
its trunk interfaces has left the down state and
transitioned into some other state. This other
state is indicated by the included value of
fcTrunkifOperStatus."
::= { cffFcFeNotifications 2 }
fcIfElpReject NOTIFICATION-TYPE
OBJECTS {
fcIfElpNbrNodeName,
fcIfElpNbrPortName,
fcIfElpRejectReasonCode,
fcIfElpRejectReasonCodeExpl
}
STATUS current
DESCRIPTION
"This notification is generated by the agent
whenever this interface received a ELP request and
rejected it."
::= { cffFcFeNotifications 3 }
fcotInserted NOTIFICATION-TYPE
OBJECTS { cieIfOperStatusCause }
STATUS current
DESCRIPTION
"This notification indicates that a Fibre Channel Optical
Transmitter (FCOT) for an interface is inserted.
This notification is generated by the agent whenever the
'cieIfOperStatusCause' object for one of its interfaces
has transitioned into some other state from
'fcotNotPresent' state.
This other state is indicated by the included value
of 'cieIfOperStatusCause'."
::= { cffFcFeNotifications 4 }
fcotRemoved NOTIFICATION-TYPE
OBJECTS { cieIfOperStatusCause }
STATUS current
DESCRIPTION
"This notification indicates that a Fibre Channel Optical
Transmitter (FCOT) for an interface is removed.
This notification is generated by the agent whenever the
'cieIfOperStatusCause' object for one of its interfaces
has entered into 'fcotNotPresent' state."
::= { cffFcFeNotifications 5 }
-- conformance information
cffFcFeMIBCompliances OBJECT IDENTIFIER
::= { cffFcFeMIBConformance 1 }
cffFcFeMIBGroups OBJECT IDENTIFIER
::= { cffFcFeMIBConformance 2 }
cffFcFeMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfCapGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
::= { cffFcFeMIBCompliances 1 }
cffFcFeMIBCompliance1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfCapGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
::= { cffFcFeMIBCompliances 2 }
cffFcFeMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cffFcFeMIBCompliances 3 }
cffFcFeMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cffFcFeMIBCompliances 4 }
cffFcFeMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 5 }
cffFcFeMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup
}
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 6 }
cffFcFeMIBComplianceRev6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 7 }
cffFcFeMIBComplianceRev7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 8 }
cffFcFeMIBComplianceRev8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup,
fcIfBbScnGroup
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX Integer32 (256..2112)
DESCRIPTION
"It is compliant to support a minimum value of
of 256 for this object which is larger than
the defined minimum value."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 9 }
cffFcFeMIBComplianceRev9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup,
fcIfBbScnGroup,
fcIfCapableGroup,
fcIfInfoPortGroup
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfModuleGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX FcRxDataFieldSize
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 10 }
cffFcFeMIBComplianceRev10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup,
fcIfBbScnGroup,
fcIfCapableGroup,
fcIfInfoPortGroup,
fcIfModuleGroup
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfToggleCtrlConfigGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX FcRxDataFieldSize
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 11 }
cffFcFeMIBComplianceRev11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup,
fcIfBbScnGroup,
fcIfCapableGroup,
fcIfInfoPortGroup,
fcIfModuleGroupRev1
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfFlapCtrlConfigGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX FcRxDataFieldSize
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 12 }
cffFcFeMIBComplianceRev12 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-FE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
fcFeGroup,
fcIfGroup,
fcTrunkIfGroup,
fcIfLoginGroup,
fcIfElpGroup,
fcIfErrorGroup,
fcIfC2AccountingGroup,
fcIfC3AccountingGroup,
fcIfCfAccountingGroup,
fcIfNotificationGroup,
fcIfGroupRev1,
fcIfCapGroupRev1,
fcIfGroupRev2,
fcIfStatGroup,
fcIfErrorGroupRev1,
fcIfGroupRev3,
fcIfRNIDInfoGroup,
fcIfInfoGroup,
fcIfGigEinfoExtGroup,
fcIfGigEinfoExtGroupRev1,
fcIfBbScnGroup,
fcIfCapableGroup,
fcIfInfoPortGroup,
fcIfModuleGroupRev1
}
GROUP fcotInfoNotificationGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfGigEInfoGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfFlapCtrlConfigGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP fcIfErrorGroupRev2
DESCRIPTION
"Implementation of this group is mandatory only
for the devices which support errors of the ports
in this group."
OBJECT cffFcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfPortRateMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcIfRxDataFieldSize
SYNTAX FcRxDataFieldSize
DESCRIPTION
"Write access is not required."
OBJECT fcIfAdminRxBbCredit
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeISL
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
OBJECT fcIfAdminRxBbCreditModeFx
DESCRIPTION
"It is compliant to support a range which is
smaller than the range defined."
::= { cffFcFeMIBCompliances 13 }
-- Units of Conformance
fcFeGroup OBJECT-GROUP
OBJECTS {
cffFcFeElementName,
adminTrunkProtocol,
fcIfElpRejectReasonCode,
fcIfElpRejectReasonCodeExpl
}
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 1 }
fcIfGroup OBJECT-GROUP
OBJECTS {
fcIfWwn,
fcIfAdminMode,
fcIfOperMode,
fcIfAdminSpeed,
fcIfBeaconMode,
fcIfPortChannelIfIndex,
fcIfOperStatusCause,
fcIfOperStatusCauseDescr,
fcIfAdminTrunkMode,
fcIfOperTrunkMode,
fcIfAllowedVsanList2k,
fcIfAllowedVsanList4k,
fcIfActiveVsanList2k,
fcIfActiveVsanList4k,
fcIfBbCreditModel,
fcIfHoldTime,
fcIfTransmitterType,
fcIfConnectorType,
fcIfSerialNo,
fcIfRevision,
fcIfVendor,
fcIfSFPSerialIDData,
fcIfPartNumber,
fcIfAdminRxBbCredit,
fcIfAdminRxBbCreditModeISL,
fcIfAdminRxBbCreditModeFx,
fcIfOperRxBbCredit,
fcIfRxDataFieldSize
}
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 2 }
fcTrunkIfGroup OBJECT-GROUP
OBJECTS {
fcTrunkIfOperStatus,
fcTrunkIfOperStatusCause,
fcTrunkIfOperStatusCauseDescr
}
STATUS current
DESCRIPTION
"A collection objects giving trunk port information."
::= { cffFcFeMIBGroups 3 }
fcIfLoginGroup OBJECT-GROUP
OBJECTS {
fcIfLoginEntryCount,
fcIfNxPortNodeName,
fcIfNxPortName,
fcIfNxPortAddress,
fcIfNxFcphVersionAgreed,
fcIfNxRxBbCredit,
fcIfNxTxBbCredit,
fcIfNxClass2RxDataFieldSize,
fcIfNxClass3RxDataFieldSize,
fcIfNxCosSuppAgreed,
fcIfNxClass2SeqDelivAgreed,
fcIfNxClass3SeqDelivAgreed
}
STATUS current
DESCRIPTION
"A collection of objects giving Fabric Login info for
Fx_Port."
::= { cffFcFeMIBGroups 4 }
fcIfElpGroup OBJECT-GROUP
OBJECTS {
fcIfElpNbrNodeName,
fcIfElpNbrPortName,
fcIfElpRxBbCredit,
fcIfElpTxBbCredit,
fcIfElpCosSuppAgreed,
fcIfElpClass2SeqDelivAgreed,
fcIfElpClass2RxDataFieldSize,
fcIfElpClass3SeqDelivAgreed,
fcIfElpClass3RxDataFieldSize,
fcIfElpClassFXII,
fcIfElpClassFRxDataFieldSize,
fcIfElpClassFConcurrentSeq,
fcIfElpClassFEndToEndCredit,
fcIfElpClassFOpenSeq
}
STATUS current
DESCRIPTION
"A collection of objects giving Exchange Link Parameters
established between the 2 Interconnect_Ports."
::= { cffFcFeMIBGroups 5 }
fcIfCapGroup OBJECT-GROUP
OBJECTS {
fcIfCapFcphVersionHigh,
fcIfCapFcphVersionLow,
fcIfCapRxBbCreditMax,
fcIfCapRxBbCreditMin,
fcIfCapRxDataFieldSizeMax,
fcIfCapRxDataFieldSizeMin,
fcIfCapCos,
fcIfCapClass2SeqDeliv,
fcIfCapClass3SeqDeliv,
fcIfCapHoldTimeMax,
fcIfCapHoldTimeMin,
fcIfCapISLRxBbCreditMax,
fcIfCapISLRxBbCreditMin,
fcIfCapRxBbCreditWriteable,
fcIfCapRxBbCreditDefault,
fcIfCapISLRxBbCreditDefault
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing information what the
port is capable of supporting."
::= { cffFcFeMIBGroups 6 }
fcIfErrorGroup OBJECT-GROUP
OBJECTS {
fcIfLinkFailures,
fcIfSyncLosses,
fcIfSigLosses,
fcIfPrimSeqProtoErrors,
fcIfInvalidTxWords,
fcIfInvalidCrcs,
fcIfDelimiterErrors,
fcIfAddressIdErrors,
fcIfLinkResetIns,
fcIfLinkResetOuts,
fcIfOlsIns,
fcIfOlsOuts,
fcIfRuntFramesIn,
fcIfJabberFramesIn,
fcIfTxWaitCount,
fcIfFramesTooLong,
fcIfFramesTooShort,
fcIfLRRIn,
fcIfLRROut,
fcIfNOSIn,
fcIfNOSOut,
fcIfFragFrames,
fcIfEOFaFrames,
fcIfUnknownClassFrames,
fcIf8b10bDisparityErrors,
fcIfFramesDiscard,
fcIfELPFailures,
fcIfBBCreditTransistionFromZero,
fcIfEISLFramesDiscard,
fcIfFramingErrorFrames
}
STATUS current
DESCRIPTION
"A collection of objects providing errors of the ports."
::= { cffFcFeMIBGroups 7 }
fcIfC2AccountingGroup OBJECT-GROUP
OBJECTS {
fcIfC2InFrames,
fcIfC2OutFrames,
fcIfC2InOctets,
fcIfC2OutOctets,
fcIfC2Discards,
fcIfC2FbsyFrames,
fcIfC2FrjtFrames,
fcIfC2PBSYFrames,
fcIfC2PRJTFrames
}
STATUS current
DESCRIPTION
"A collection of objects providing class 2 accounting
information of the ports."
::= { cffFcFeMIBGroups 8 }
fcIfC3AccountingGroup OBJECT-GROUP
OBJECTS {
fcIfC3InFrames,
fcIfC3OutFrames,
fcIfC3InOctets,
fcIfC3OutOctets,
fcIfC3Discards
}
STATUS current
DESCRIPTION
"A collection of objects providing class 3 accounting
information of the ports."
::= { cffFcFeMIBGroups 9 }
fcIfCfAccountingGroup OBJECT-GROUP
OBJECTS {
fcIfCfInFrames,
fcIfCfOutFrames,
fcIfCfInOctets,
fcIfCfOutOctets,
fcIfCfDiscards
}
STATUS current
DESCRIPTION
"A collection of objects providing class f accounting
information of the ports."
::= { cffFcFeMIBGroups 10 }
fcIfNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
fcTrunkIfDownNotify,
fcTrunkIfUpNotify,
fcIfElpReject
}
STATUS current
DESCRIPTION
"A collection of notifications for monitoring fibre
channel interfaces."
::= { cffFcFeMIBGroups 11 }
fcIfGroupRev1 OBJECT-GROUP
OBJECTS {
fcIfActiveVsanUpList2k,
fcIfActiveVsanUpList4k
}
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 12 }
fcIfCapGroupRev1 OBJECT-GROUP
OBJECTS {
fcIfCapFcphVersionHigh,
fcIfCapFcphVersionLow,
fcIfCapRxDataFieldSizeMax,
fcIfCapRxDataFieldSizeMin,
fcIfCapCos,
fcIfCapClass2SeqDeliv,
fcIfCapClass3SeqDeliv,
fcIfCapHoldTimeMax,
fcIfCapHoldTimeMin,
fcIfCapBbScnCapable,
fcIfCapBbScnMax,
fcIfCapOsmFrmCapable,
fcIfCapOsmRxBbCreditWriteable,
fcIfCapOsmRxBbCreditMax,
fcIfCapOsmRxBbCreditMin,
fcIfCapOsmRxBbCreditDefault,
fcIfCapOsmISLRxBbCreditMax,
fcIfCapOsmISLRxBbCreditMin,
fcIfCapOsmISLRxBbCreditDefault,
fcIfCapOsmRxPerfBufWriteable,
fcIfCapOsmRxPerfBufMax,
fcIfCapOsmRxPerfBufMin,
fcIfCapOsmRxPerfBufDefault,
fcIfCapOsmISLRxPerfBufMax,
fcIfCapOsmISLRxPerfBufMin,
fcIfCapOsmISLRxPerfBufDefault,
fcIfCapFrmRxBbCreditWriteable,
fcIfCapFrmRxBbCreditMax,
fcIfCapFrmRxBbCreditMin,
fcIfCapFrmRxBbCreditDefault,
fcIfCapFrmISLRxBbCreditMax,
fcIfCapFrmISLRxBbCreditMin,
fcIfCapFrmISLRxBbCreditDefault,
fcIfCapFrmRxPerfBufWriteable,
fcIfCapFrmRxPerfBufMax,
fcIfCapFrmRxPerfBufMin,
fcIfCapFrmRxPerfBufDefault,
fcIfCapFrmISLRxPerfBufMax,
fcIfCapFrmISLRxPerfBufMin,
fcIfCapFrmISLRxPerfBufDefault
}
STATUS current
DESCRIPTION
"A collection of objects providing information what the
port is capable of supporting."
::= { cffFcFeMIBGroups 13 }
fcIfGroupRev2 OBJECT-GROUP
OBJECTS {
fcIfPortRateMode,
fcIfAdminRxPerfBuffer,
fcIfOperRxPerfBuffer,
fcIfBbScn
}
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 14 }
fcIfStatGroup OBJECT-GROUP
OBJECTS {
fcIfCurrRxBbCredit,
fcIfCurrTxBbCredit
}
STATUS current
DESCRIPTION
"A collection objects giving port statistics."
::= { cffFcFeMIBGroups 15 }
fcIfErrorGroupRev1 OBJECT-GROUP
OBJECTS {
fcIfLipF8In,
fcIfLipF8Out,
fcIfNonLipF8In,
fcIfNonLipF8Out
}
STATUS current
DESCRIPTION
"A collection of objects providing errors of the ports."
::= { cffFcFeMIBGroups 16 }
fcIfGroupRev3 OBJECT-GROUP
OBJECTS { fcIfPortInitStatus }
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 17 }
fcIfRNIDInfoGroup OBJECT-GROUP
OBJECTS {
fcIfRNIDInfoStatus,
fcIfRNIDInfoTypeNumber,
fcIfRNIDInfoModelNumber,
fcIfRNIDInfoManufacturer,
fcIfRNIDInfoPlantOfMfg,
fcIfRNIDInfoSerialNumber,
fcIfRNIDInfoUnitType,
fcIfRNIDInfoPortId
}
STATUS current
DESCRIPTION
"A collection objects giving the peer node identification
data."
::= { cffFcFeMIBGroups 18 }
fcIfGigEInfoGroup OBJECT-GROUP
OBJECTS { fcIfGigEPortChannelIfIndex }
STATUS current
DESCRIPTION
"A collection objects to provide port channel information
for gigabit ethernet interfaces."
::= { cffFcFeMIBGroups 19 }
fcotInfoNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
fcotInserted,
fcotRemoved
}
STATUS current
DESCRIPTION
"A collection of notifications for FCOT Inserted/Removed."
::= { cffFcFeMIBGroups 20 }
fcIfInfoGroup OBJECT-GROUP
OBJECTS {
fcIfAdminRxBbCreditExtended,
fcIfFcTunnelIfIndex,
fcIfServiceState
}
STATUS current
DESCRIPTION
"A collection of objects providing information what the
port is capable of supporting."
::= { cffFcFeMIBGroups 21 }
fcIfGigEinfoExtGroup OBJECT-GROUP
OBJECTS {
fcIfGigEAutoNegotiate,
fcIfGigEBeaconMode
}
STATUS current
DESCRIPTION
"A collection objects giving providing information about
GigE interfaces."
::= { cffFcFeMIBGroups 22 }
fcIfBbScnGroup OBJECT-GROUP
OBJECTS { fcIfAdminBbScnMode }
STATUS current
DESCRIPTION
"A collection of objects providing information what the
port is capable of supporting."
::= { cffFcFeMIBGroups 23 }
fcIfCapableGroup OBJECT-GROUP
OBJECTS {
fcIfIsServiceStateCapable,
fcIfIsPortRateModeCapable,
fcIfIsAdminRxBbCreditExtendedCapable
}
STATUS current
DESCRIPTION
"This is a group of objects that help the user figure out if the
system is capable of a change in the given object."
::= { cffFcFeMIBGroups 24 }
fcIfInfoPortGroup OBJECT-GROUP
OBJECTS { fcIfPortType }
STATUS current
DESCRIPTION
"A collection objects giving port information."
::= { cffFcFeMIBGroups 25 }
fcIfModuleGroup OBJECT-GROUP
OBJECTS {
fcIfModuleOverSubscriptionRatioConfig,
fcIfModuleBandwidthFairnessConfig,
fcIfModuleBandwidthFairnessOper
}
STATUS deprecated
DESCRIPTION
"A collection objects giving module information."
::= { cffFcFeMIBGroups 26 }
fcIfToggleCtrlConfigGroup OBJECT-GROUP
OBJECTS {
fcIfToggleCtrlConfigEnable,
fcIfToggleCtrlConfigReason,
fcIfToggleCtrlConfigDuration,
fcIfToggleCtrlConfigNumFlaps
}
STATUS deprecated
DESCRIPTION
"A collection of objects which provides toggle control
information for fibre channel interface."
::= { cffFcFeMIBGroups 27 }
fcIfFlapCtrlConfigGroup OBJECT-GROUP
OBJECTS {
fcIfFlapCtrlConfigEnable,
fcIfFlapCtrlConfigDuration,
fcIfFlapCtrlConfigNumFlaps
}
STATUS current
DESCRIPTION
"A collection of objects which provides toggle control
information for fibre channel interface."
::= { cffFcFeMIBGroups 28 }
fcIfModuleGroupRev1 OBJECT-GROUP
OBJECTS {
fcIfModuleOverSubscriptionRatioConfig,
fcIfModuleBandwidthFairnessConfig,
fcIfModuleBandwidthFairnessOper,
fcIfModuleXcvrFrequencyConfig
}
STATUS current
DESCRIPTION
"A collection objects giving module information."
::= { cffFcFeMIBGroups 29 }
fcIfGigEinfoExtGroupRev1 OBJECT-GROUP
OBJECTS { fcIfGigConnectorType }
STATUS current
DESCRIPTION
"A collection objects giving providing information about
GigE interfaces."
::= { cffFcFeMIBGroups 30 }
fcIfErrorGroupRev2 OBJECT-GROUP
OBJECTS {
fcIfTimeOutDiscards,
fcIfOutDiscards,
fcIfCreditLoss,
fcIfTxWtAvgBBCreditTransitionToZero
}
STATUS current
DESCRIPTION
"A collection of objects providing errors of the ports."
::= { cffFcFeMIBGroups 31 }
END
Reference in New Issue View Git Blame Copy Permalink