mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
736 lines
28 KiB
Plaintext
736 lines
28 KiB
Plaintext
-- *********************************************************************
|
|
-- CISCO-DOT11-HT-MAC-MIB.my: DOT11 HT MAC MIB
|
|
-- July 2006, Prasanna Viswakumar
|
|
--
|
|
-- Copyright (c) 2006-2007 by Cisco Systems, Inc.
|
|
-- *********************************************************************
|
|
|
|
CISCO-DOT11-HT-MAC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
ciscoDot11HtMacMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200705160000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on Cisco's
|
|
WLAN devices that provide the wired uplink to wireless
|
|
clients through the high-throughput dot11 radios
|
|
compliant to the 802.11n specification.
|
|
|
|
The MIB describes the MAC layer parameters of the
|
|
802.11n compliant radio interfaces.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
A-MPDU
|
|
|
|
An aggregated format that consists of several MAC
|
|
Protocol Data Units being aggregated and transmitted
|
|
in one PHY Service Data Unit.
|
|
|
|
A-MSDU
|
|
|
|
An aggregated format that consists of several MAC
|
|
Service Data Units being aggregated and transmitted
|
|
in one MAC Protocol Data Unit.
|
|
|
|
Block-Ack
|
|
|
|
This refers to the acknowledgement done for all the
|
|
MPDUs in an A-MDPU.
|
|
|
|
Basic Service Set ( BSS )
|
|
|
|
The IEEE 802.11 BSS of an AP comprises of the
|
|
stations directly associating with the AP.
|
|
|
|
|
|
Dual CTS
|
|
|
|
Clear-To-Send control frame is sent by the receiver
|
|
in response to the Request-To-Send (RTS) control
|
|
frame from the sender to virtually reserve the
|
|
wireless medium for data transfer.
|
|
|
|
Dual CTS mechanism is used by the AP to reserve the
|
|
wireless medium for wireless devices that do not
|
|
support STBC.
|
|
|
|
Green Field
|
|
|
|
A mode of operation where high-throughput 802.11n
|
|
frames are transmitted without a legacy compatible
|
|
part.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point. Mobile Node
|
|
and client are used interchangeably.
|
|
|
|
Modulation and Coding Scheme ( MCS )
|
|
|
|
This is a value that determines the modulation, coding and
|
|
number of spatial channels. Each scheme specifies the
|
|
modulation technique, coding rate , number of spatial
|
|
streams etc and the corresponding data rate.
|
|
|
|
Multiple Input Multiple Output ( MIMO )
|
|
|
|
This technique advocates sending and receiving data
|
|
communication signals through multiple antennas. MIMO
|
|
uses the multiple streams to transmit more information
|
|
and recombine the signal at the receiving end. This
|
|
brings more reliability and significant gain over the
|
|
traditional antenna systems.
|
|
|
|
Power Save Multi-Poll ( PSMP )
|
|
|
|
A MAC control frame that schedules the transmissions
|
|
and receptions of PSMP-enabled devices.
|
|
|
|
Phased Coexistence Operation ( PCO )
|
|
|
|
A BSS mode with alternating 20MHz and 40MHz phases of
|
|
operation controlled by a PCO AP.
|
|
|
|
Space-Time Block Coding ( STBC )
|
|
|
|
By this technique, a wireless device transmits several
|
|
copies of a data stream across a series of antennas
|
|
so that the receiver can use the various received
|
|
portions of the data signal to improve reliability of
|
|
data transfer.
|
|
|
|
Reduced Inter-Frame Space ( RIFS )
|
|
|
|
A time interval between multiple transmissions of a
|
|
single transmitter used to reduce overhead and
|
|
increase network efficiency.
|
|
|
|
TU
|
|
|
|
A measurement of time equal to 1024 microseconds.
|
|
|
|
REFERENCE
|
|
|
|
[1] Part 11. Wireless LAN Medium Access Control ( MAC )
|
|
and Physical Layer ( PHY ) Specifications: Enhancements
|
|
for Higher Throughput
|
|
|
|
[2] Enhanced Wireless Consortium MAC Specification,
|
|
v1.24
|
|
|
|
[3] Enhanced Wireless Consortium PHY Specification,
|
|
v1.27 "
|
|
|
|
REVISION "200705160000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module. "
|
|
::= { ciscoMgmt 626 }
|
|
|
|
ciscoDot11HtMacMIBNotifs OBJECT IDENTIFIER ::= { ciscoDot11HtMacMIB 0 }
|
|
ciscoDot11HtMacMIBObjects OBJECT IDENTIFIER ::= { ciscoDot11HtMacMIB 1 }
|
|
ciscoDot11HtMacMIBConform OBJECT IDENTIFIER ::= { ciscoDot11HtMacMIB 2 }
|
|
|
|
cD11HtMacStationConfig OBJECT IDENTIFIER
|
|
::= { ciscoDot11HtMacMIBObjects 1 }
|
|
|
|
cD11HtMacOperations OBJECT IDENTIFIER
|
|
::= { ciscoDot11HtMacMIBObjects 2 }
|
|
|
|
-- ********************************************************************
|
|
-- WLAN configuration
|
|
-- ********************************************************************
|
|
|
|
cD11HtMacStationConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CD11HtMacStationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the MAC configuration
|
|
parameters of 802.11n interfaces.
|
|
|
|
There exists in this table, an entry corresponding
|
|
to each entry in dot11PhyOperationTable where
|
|
dot11PHYType equals 'ht'(7). "
|
|
REFERENCE
|
|
"dot11PhyOperationTable, IEEE802dot11-MIB. "
|
|
::= { cD11HtMacStationConfig 1 }
|
|
|
|
cD11HtMacStationConfigEntry OBJECT-TYPE
|
|
SYNTAX CD11HtMacStationConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each Entry represents a conceptual row in
|
|
ccD11HtMacStationConfigTable and corresponds to
|
|
the MAC configuration parameters of an 802.11n
|
|
interface. "
|
|
INDEX { ifIndex }
|
|
::= { cD11HtMacStationConfigTable 1 }
|
|
|
|
CD11HtMacStationConfigEntry ::=
|
|
SEQUENCE {
|
|
cD11HtMacOperationalMCSSet OCTET STRING,
|
|
cD11HtMacMIMOPowerSave INTEGER,
|
|
cD11HtMacNDelayedBlockAckImplemented TruthValue,
|
|
cD11HtMacMaxAMSDULength INTEGER,
|
|
cD11HtMacPSMPImplemented TruthValue,
|
|
cD11HtMacSTBCControlFrameImplemented TruthValue,
|
|
cD11HtMacLsigTxOpProtectImplemented TruthValue,
|
|
cD11HtMacMaxRxAMPDUFactor INTEGER,
|
|
cD11HtMacMPDUDensity INTEGER,
|
|
cD11HtMacPCOImplemented TruthValue,
|
|
cD11HtMacTransitionTime INTEGER,
|
|
cD11HtMacMCSFeedbackImplemented INTEGER,
|
|
cD11HtMacAMSDUEnable TruthValue,
|
|
cD11HtMacAMPDUEnable TruthValue
|
|
}
|
|
|
|
cD11HtMacOperationalMCSSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the set of MCS at which the
|
|
station may transmit data. Each bit represents an
|
|
MCS index and corresponds to a particular data rate.
|
|
Each MCS shall be within the range from 0 to 127, and
|
|
shall be supported for receiving data.
|
|
|
|
This value is reported in transmitted Beacon, Probe
|
|
Request, Probe Response, Association Request,
|
|
Association Response, Reassociation Request and
|
|
Reassociation Response frames and is used to
|
|
indicate which MCS values shall be supported by all the
|
|
devices in the BSS. When this object is zeroed, it
|
|
indicates that the other stations in the BSS shall use
|
|
legacy data rates. "
|
|
REFERENCE
|
|
"Part 11: Wireless LAN Medium Access Control (MAC)
|
|
and Physical Layer (PHY) Specifications
|
|
Section 7.2.3, Management Frames. "
|
|
::= { cD11HtMacStationConfigEntry 1 }
|
|
|
|
cD11HtMacMIMOPowerSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
static(1),
|
|
dynamic(2),
|
|
mimo(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the operational power save
|
|
state of MIMO. The semantics are defined as follows.
|
|
|
|
'static' - The dot11 interface is operating in static
|
|
MIMO Power Save mode and hence, other stations
|
|
should not send MIMO packets destined to this dot11
|
|
interface.
|
|
|
|
'dynamic'- The interface switches out of the MIMO
|
|
Power Save mode to enable multiple receive chains
|
|
when an RTS is received and switches back to the
|
|
single receive-chain mode once the unicast
|
|
transmission of the MPDU is complete.
|
|
|
|
'mimo' - The dot11 interface always has multiple
|
|
receive-chains enabled and hence MIMO packets can
|
|
always be sent to this interface. "
|
|
::= { cD11HtMacStationConfigEntry 2 }
|
|
|
|
cD11HtMacNDelayedBlockAckImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when 'true', indicates that the
|
|
dot11 interface supports the No-Ack option of the
|
|
Delayed Block Acknowledgement. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 3 }
|
|
|
|
cD11HtMacMaxAMSDULength OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
amsduSize3839(3839),
|
|
amsduSize7935(7935)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the supported maximum size of
|
|
A-MSDU.
|
|
|
|
'amsduSize3839' - This indicates a maximum size of
|
|
3839 octets.
|
|
|
|
'amsduSize7935' - This indicates a maximum size of
|
|
7935 octets. "
|
|
DEFVAL { amsduSize3839 }
|
|
::= { cD11HtMacStationConfigEntry 4 }
|
|
|
|
cD11HtMacPSMPImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when 'true', indicates that the dot11
|
|
interface is capable of supporting PSMP. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 5 }
|
|
|
|
cD11HtMacSTBCControlFrameImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when 'true', indicates that the dot11
|
|
interface is capable of processing the received STBC
|
|
control frames. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 6 }
|
|
|
|
cD11HtMacLsigTxOpProtectImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when 'true', indicates that the dot11
|
|
interface is capable of supporting L-SIG TXOP
|
|
Protection option. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 7 }
|
|
|
|
cD11HtMacMaxRxAMPDUFactor OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to compute the maximum length
|
|
of the A-MPDU the STA can receive, as follows.
|
|
|
|
maximum length of A-MPDU in octets =
|
|
2 ^ ( 13 + cD11HtMacMaxRxAMPDUFactor ) -1. "
|
|
DEFVAL { 0 }
|
|
::= { cD11HtMacStationConfigEntry 8 }
|
|
|
|
cD11HtMacMPDUDensity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noTimeRestriction(1),
|
|
oneEighth(2),
|
|
oneFourth(3),
|
|
half(4),
|
|
one(5),
|
|
two(6),
|
|
four(7),
|
|
eight(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the minimum time between the
|
|
start of adjacent MPDUs within an A-MPDU. This time
|
|
is measured at the PHY service access-point; the
|
|
number of bytes between the start of two consecutive
|
|
MPDUs in A-MPDU shall be equal or greater than
|
|
(MPDU-density*PHY-bit-rate)/8. The encoding of the
|
|
minimum time to this object is as follows.
|
|
|
|
'noTimeRestriction' - no time restriction between the
|
|
start of adjacent MPDUs.
|
|
|
|
'oneEighth' - 1/8 microseconds
|
|
'oneFourth' - 1/4 microseconds
|
|
'half' - 1/2 microseconds
|
|
'one' - 1 microsecond
|
|
'two' - 2 microseconds
|
|
'four' - 4 microseconds
|
|
'eight' - 8 microseconds. "
|
|
DEFVAL { one }
|
|
::= { cD11HtMacStationConfigEntry 9 }
|
|
|
|
cD11HtMacPCOImplemented OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when 'true', indicates that the dot11
|
|
interface is capable of supporting Phased coexistence
|
|
operation. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 10 }
|
|
|
|
|
|
cD11HtMacTransitionTime OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fourHundred(400),
|
|
oneThousandFiveHundred(1500),
|
|
fiveThousand(5000)
|
|
}
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates that the minimum transition
|
|
time within which the STA can switch between 20 MHz
|
|
channel width and 40 MHz channel width with a high
|
|
probability. "
|
|
DEFVAL { fiveThousand }
|
|
::= { cD11HtMacStationConfigEntry 11 }
|
|
|
|
cD11HtMacMCSFeedbackImplemented OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unsolicited (2),
|
|
both (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MCS feedback
|
|
capability supported on this 802.11n interface.
|
|
The semantics are as follows.
|
|
|
|
'none' - The station does not provide MCS feedback
|
|
through this interface.
|
|
|
|
'unsolicited' - The station provides only
|
|
unsolicited MCS feedback.
|
|
|
|
'both' - The station provides both solicited as
|
|
well as unsolicited MCS feedback. "
|
|
::= { cD11HtMacStationConfigEntry 12 }
|
|
|
|
cD11HtMacAMSDUEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether this 802.11n radio
|
|
can transmit / receive A-MSDUs. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 13 }
|
|
|
|
cD11HtMacAMPDUEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether this 802.11n radio
|
|
can transmit / receive A-MPDUs. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacStationConfigEntry 14 }
|
|
|
|
cD11HtMacOperationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CD11HtMacOperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the operational parameters
|
|
of 802.11n interfaces.
|
|
|
|
Entries in this table are created automatically
|
|
by the agent corresponding to each 802.11n
|
|
interface.
|
|
|
|
There exists in this table, an entry corresponding
|
|
to each entry in dot11PhyOperationTable where
|
|
dot11PHYType equals 'ht'(7). "
|
|
REFERENCE
|
|
"dot11PhyOperationTable, IEEE802dot11-MIB. "
|
|
::= { cD11HtMacOperations 1 }
|
|
|
|
cD11HtMacOperationEntry OBJECT-TYPE
|
|
SYNTAX CD11HtMacOperationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in cD11HtMacOperationTable and
|
|
represents the operational parameters of an 802.11n
|
|
interface. "
|
|
INDEX { ifIndex }
|
|
::= { cD11HtMacOperationTable 1 }
|
|
|
|
CD11HtMacOperationEntry ::=
|
|
SEQUENCE {
|
|
cD11HtMacOperatingMode INTEGER,
|
|
cD11HtMacRIFSMode TruthValue,
|
|
cD11HtMacPSMPControlledAccess TruthValue,
|
|
cD11HtMacServiceIntervalGranularity INTEGER,
|
|
cD11HtMacDualCTSProtection TruthValue,
|
|
cD11HtMacLSigTxOpFullProtectionEnabled TruthValue,
|
|
cD11HtMacNonGFEntitiesPresent TruthValue,
|
|
cD11HtMacPCOActivated TruthValue,
|
|
cD11HtMacPCO40MaxDuration INTEGER,
|
|
cD11HtMacPCO20MaxDuration INTEGER,
|
|
cD11HtMacPCO40MinDuration INTEGER,
|
|
cD11HtMacPCO20MinDuration INTEGER
|
|
}
|
|
|
|
cD11HtMacOperatingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pureHt (1),
|
|
optionalProtection (2),
|
|
mandatoryFortyProtection (3),
|
|
mandatoryAllProtection (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the level of protection to be
|
|
provided to the data transmissions of 802.11n radios.
|
|
The semantics are as follows.
|
|
|
|
'pureHt' - No protection will be provided to the
|
|
high throughput tranmissions in the BSS started on
|
|
this interface. This indicates that there will
|
|
only be those high-throughput devices associated to
|
|
the AP in the respective BSS.
|
|
|
|
'optionalProtection' - Protection is optional
|
|
considering that there could be legacy devices in the
|
|
control and extension channels.
|
|
|
|
'mandatoryFortyProtection' - Protection is mandatory
|
|
for all the 40MHz channel transmissions.
|
|
|
|
'mandatoryAllProtection' - There are legacy devices
|
|
in the BSS and hence all high throughput transmissions
|
|
are mandatorily protected. "
|
|
DEFVAL { pureHt }
|
|
::= { cD11HtMacOperationEntry 1 }
|
|
|
|
cD11HtMacRIFSMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that RIFS mode
|
|
is allowed in the BSS. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 2 }
|
|
|
|
cD11HtMacPSMPControlledAccess OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that the AP
|
|
accepts associations only from PSMP-enabled clients. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 3 }
|
|
|
|
cD11HtMacServiceIntervalGranularity OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the service interval
|
|
granularity to be used for scheduled PSMP. The value
|
|
of the granularity is given by
|
|
(cD11HtMacServiceIntervalGranularity+1)*5
|
|
milliseconds. "
|
|
DEFVAL { 0 }
|
|
::= { cD11HtMacOperationEntry 4 }
|
|
|
|
cD11HtMacDualCTSProtection OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that the AP
|
|
uses dual CTS protection to protect the regular and the
|
|
STBC transmissions. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 5 }
|
|
|
|
cD11HtMacLSigTxOpFullProtectionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that the
|
|
LSIG-TXOP Protection is currently enabled on the
|
|
AP. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 6 }
|
|
|
|
cD11HtMacNonGFEntitiesPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that
|
|
Non-GreenField clients are present in the BSS. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 7 }
|
|
|
|
cD11HtMacPCOActivated OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object, when set to 'true', indicates that the
|
|
PCO is activated. "
|
|
DEFVAL { false }
|
|
::= { cD11HtMacOperationEntry 8 }
|
|
|
|
cD11HtMacPCO20MaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "TU"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum duration of
|
|
20 MHz phase in TU under PCO operation. The value of
|
|
this object shall be equal to or larger than
|
|
cD11HtMacPCO20MinDuration. "
|
|
DEFVAL { 60 }
|
|
::= { cD11HtMacOperationEntry 9 }
|
|
|
|
cD11HtMacPCO40MaxDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "TU"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum duration
|
|
of 40 MHz phase in TU under PCO operation. The
|
|
value of this object shall be equal to or larger
|
|
than cD11HtMacPCO40MinDuration. "
|
|
DEFVAL { 60 }
|
|
::= { cD11HtMacOperationEntry 10 }
|
|
|
|
cD11HtMacPCO20MinDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "TU"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the minimum duration of
|
|
20 MHz phase in TU under PCO operation. "
|
|
DEFVAL { 40 }
|
|
::= { cD11HtMacOperationEntry 11 }
|
|
|
|
cD11HtMacPCO40MinDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
UNITS "TU"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the minimum duration of
|
|
40 MHz phase in TU under PCO operation. "
|
|
DEFVAL { 40 }
|
|
::= { cD11HtMacOperationEntry 12 }
|
|
|
|
|
|
--********************************************************************
|
|
--* Compliance statements
|
|
--********************************************************************
|
|
|
|
ciscoDot11HtMacMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoDot11HtMacMIBConform 1 }
|
|
|
|
ciscoDot11HtMacMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoDot11HtMacMIBConform 2 }
|
|
|
|
cD11HtMacCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoDot11HtMacMIB module. "
|
|
MODULE MANDATORY-GROUPS {
|
|
ciscoDot11HtMacStationConfigGroup,
|
|
ciscoDot11HtMacOperationsGroup
|
|
}
|
|
::= { ciscoDot11HtMacMIBCompliances 1 }
|
|
|
|
--********************************************************************
|
|
--* Units of conformance
|
|
--********************************************************************
|
|
|
|
ciscoDot11HtMacStationConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cD11HtMacOperationalMCSSet,
|
|
cD11HtMacMIMOPowerSave,
|
|
cD11HtMacNDelayedBlockAckImplemented,
|
|
cD11HtMacMaxAMSDULength,
|
|
cD11HtMacPSMPImplemented,
|
|
cD11HtMacSTBCControlFrameImplemented,
|
|
cD11HtMacLsigTxOpProtectImplemented,
|
|
cD11HtMacMaxRxAMPDUFactor,
|
|
cD11HtMacMPDUDensity,
|
|
cD11HtMacPCOImplemented,
|
|
cD11HtMacTransitionTime,
|
|
cD11HtMacMCSFeedbackImplemented,
|
|
cD11HtMacAMSDUEnable,
|
|
cD11HtMacAMPDUEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the MAC
|
|
configuration parameters of 802.11n radio
|
|
interfaces. "
|
|
::= { ciscoDot11HtMacMIBGroups 1 }
|
|
|
|
ciscoDot11HtMacOperationsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cD11HtMacOperatingMode,
|
|
cD11HtMacRIFSMode,
|
|
cD11HtMacPSMPControlledAccess,
|
|
cD11HtMacServiceIntervalGranularity,
|
|
cD11HtMacDualCTSProtection,
|
|
cD11HtMacLSigTxOpFullProtectionEnabled,
|
|
cD11HtMacNonGFEntitiesPresent,
|
|
cD11HtMacPCOActivated,
|
|
cD11HtMacPCO40MaxDuration,
|
|
cD11HtMacPCO20MaxDuration,
|
|
cD11HtMacPCO40MinDuration,
|
|
cD11HtMacPCO20MinDuration
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the MAC
|
|
operational parameters of 802.11n radio
|
|
interfaces. "
|
|
::= { ciscoDot11HtMacMIBGroups 2 }
|
|
|
|
--********************************************************************
|
|
--* End of units of conformance
|
|
--********************************************************************
|
|
|
|
END
|
|
|