MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-DLCSW-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

794 lines
28 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- IBM DLC Switch MIB definition.
--
-- September 1996, Dennis Ignacio.
--
-- Copyright (c) 1996-1997, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-DLC-SWITCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM RFC1213-MIB
InterfaceIndexOrZero
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI
;
ciscoDlcSwitchMIB MODULE-IDENTITY
LAST-UPDATED "9702190000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-fras@cisco.com"
DESCRIPTION
"This is the MIB module for objects used to
manage FRAS sessions to the endstation.
These objects are specific to downstream or
enduster sessions only. It does not contain
objects supported by the FRAS-HOST MIB which
are specific to upstream or host-end sessions."
::= { ciscoMgmt 76 }
--
-- The following functionality will be modelled in this MIB module:
--
-- 1. Frame-Relay Access Support
--
ciscoDlcSwitchMIBObjects OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIB 1}
-- THE BNN FORMAT (RFC 1490 Routed Format)
-- ==============
--
-- The following FRAS types of connections are modeled in the BNN
-- group of this MIB:
--
-- 1. SDLC
-- 2. LLC (Token-Ring or Ethernet)
--
--
--
-- THE BAN FORMAT (RFC 1490 Bridged Format)
-- ==============
--
-- The following FRAS types of connections are modeled in the BAN
-- group of this MIBi:
--
-- 1. SDLC
-- 2. LLC (Token-Ring or Ethernet)
--
-- -------------------------------------------------------------
frasBnnSdlc OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIBObjects 1 }
frasBnnLlc OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIBObjects 2 }
frasBanSdlc OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIBObjects 3 }
frasBanLlc OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIBObjects 4 }
-- **************************************************************
-- * Textual convention definitions *
-- **************************************************************
SAP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Service Access Point - is a term that denotes the means
by which a user entity in layer n+1 accesses a service
of a provider entity in layer n."
SYNTAX OCTET STRING (SIZE(1))
SdlcAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A hexadecimal address assigned to a secondary
poll station of an SDLC device."
SYNTAX OCTET STRING (SIZE(1))
-- *************************************************************
-- * *
-- * D L C S W I T C H F R A S - B N N *
-- * *
-- * Boundary Network Node / Routed Format *
-- * *
-- *************************************************************
-- *************************************************************
-- * *
-- * THE FRAS BNN SDLC CONNECTION TABLE *
-- * *
-- *************************************************************
frasBnnSdlcConTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrasBnnSdlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains mapping information
for each SDLC Link Station in a FRAS-BNN
to SDLC connection. All entries are derived
entirely from the router configuration."
::= { frasBnnSdlc 1 }
frasBnnSdlcConEntry OBJECT-TYPE
SYNTAX FrasBnnSdlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the entries defined
for a specific SDLC Link Station in a
BNN-SDLC configuration."
INDEX { ifIndex, bnnSdlcConAddress }
::= { frasBnnSdlcConTable 1 }
FrasBnnSdlcConEntry ::= SEQUENCE {
bnnSdlcConAddress SdlcAddress,
bnnSdlcConState INTEGER,
bnnSdlcConDlci Integer32,
bnnSdlcConFRInterface InterfaceIndexOrZero,
bnnSdlcConLocalSap SAP,
bnnSdlcConRemoteSap SAP
}
bnnSdlcConAddress OBJECT-TYPE
SYNTAX SdlcAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value is the poll address of the
secondary link station for this SDLC link.
It uniquely identifies the SDLC link station
within a single SDLC port."
::= { frasBnnSdlcConEntry 1 }
bnnSdlcConState OBJECT-TYPE
SYNTAX INTEGER {
reset (1),
testSent (2),
xidexchg (3),
connrqsent (4),
sigstnwait (5),
connrspwait (6),
connrspsent (7),
contacted (8),
discwait (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the FRAS state of the Link Station.
reset - no activity
testSent - TEST Frames sent
xidexchg - XID exchange in progress
connrqsent - Connect request sent
sigstnwait - Signal station wait state
connrspwait - Connect response wait state
connrspsent - Connect response sent
contacted - Session established
discwait - Disconnect wait state"
::= { frasBnnSdlcConEntry 2 }
bnnSdlcConDlci OBJECT-TYPE
SYNTAX Integer32 (16..1022)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Data Link Connection Identifier used for
this particular connection."
::= { frasBnnSdlcConEntry 3 }
bnnSdlcConFRInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Frame-Relay interface which the
SDLC Link Station is using to connect to the
Host."
::= { frasBnnSdlcConEntry 4 }
bnnSdlcConLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Local SAP for this SDLC station's
corresponding LLC session to the host."
::= { frasBnnSdlcConEntry 5 }
bnnSdlcConRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Remote SAP for this SDLC station's
corresponding LLC session to the host."
::= { frasBnnSdlcConEntry 6 }
-- *************************************************************
-- * *
-- * THE FRAS BNN LLC2 CONNECTION TABLE *
-- * *
-- *************************************************************
frasBnnLlcConTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrasBnnLlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for
each End Station in a FRAS-BNN to
LLC connection. The entries are derived
entirely from the router configuration."
::= { frasBnnLlc 1 }
frasBnnLlcConEntry OBJECT-TYPE
SYNTAX FrasBnnLlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for
a specific End Station's connection
state in a BNN-LLC connection."
INDEX { ifIndex,
bnnLlcConDeviceMacAddress,
bnnLlcConLanLocalSap,
bnnLlcConLanRemoteSap }
::= { frasBnnLlcConTable 1 }
FrasBnnLlcConEntry ::= SEQUENCE {
bnnLlcConDeviceMacAddress MacAddress,
bnnLlcConLanLocalSap SAP,
bnnLlcConLanRemoteSap SAP,
bnnLlcConLanInterface InterfaceIndexOrZero,
bnnLlcConDlci Integer32,
bnnLlcConState INTEGER,
bnnLlcConLocalMacAddress MacAddress,
bnnLlcConFrLocalSap SAP,
bnnLlcConFrRemoteSap SAP
}
bnnLlcConDeviceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value is the End Station's Local
Mac-Address."
::= { frasBnnLlcConEntry 1 }
bnnLlcConLanLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The End Station's Local SAP."
::= { frasBnnLlcConEntry 2 }
bnnLlcConLanRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The End Station's Remote SAP."
::= { frasBnnLlcConEntry 3 }
bnnLlcConLanInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the physical interace which the
End Station is attached to."
::= { frasBnnLlcConEntry 4 }
bnnLlcConDlci OBJECT-TYPE
SYNTAX Integer32 (16..1022)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Data Link Connection Identifier
associated with the corresponding
LLC2 session over Frame-Relay to the host."
::= { frasBnnLlcConEntry 5 }
bnnLlcConState OBJECT-TYPE
SYNTAX INTEGER {
reset (1),
testSent (2),
xidexchg (3),
connrqsent (4),
sigstnwait (5),
connrspwait (6),
connrspsent (7),
contacted (8),
discwait (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the FRAS state of the Link Station.
reset - no activity
testSent - TEST Frames sent
xidexchg - XID exchange in progress
connrqsent - Connect request sent
sigstnwait - Signal station wait state
connrspwait - Connect response wait state
connrspsent - Connect response sent
contacted - Session established
discwait - Disconnect wait state"
::= { frasBnnLlcConEntry 6 }
bnnLlcConLocalMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac-Address configured as the End Station's
target or Remote address."
::= { frasBnnLlcConEntry 7 }
bnnLlcConFrLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FRAS router's Local SAP."
::= { frasBnnLlcConEntry 8 }
bnnLlcConFrRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FRAS router's Remote SAP."
::= { frasBnnLlcConEntry 9 }
-- *************************************************************
-- * *
-- * D L C S W I T C H F R A S - B A N *
-- * *
-- * Boundary Access Node / 802.5 Bridged Format *
-- * *
-- *************************************************************
-- *************************************************************
-- * *
-- * THE FRAS BAN SDLC CONNECTION TABLE *
-- * *
-- *************************************************************
frasBanSdlcConTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrasBanSdlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for
each SDLC Link Station in a FRAS-BAN
to SDLC connection. The entries are
derived entirely from the router
configuration."
::= { frasBanSdlc 1 }
frasBanSdlcConEntry OBJECT-TYPE
SYNTAX FrasBanSdlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for
a specific SDLC Link Station in a
configured for a BAN connection."
INDEX { ifIndex,
banSdlcConAddress,
banSdlcConBanDlciMac }
::= { frasBanSdlcConTable 1 }
FrasBanSdlcConEntry ::= SEQUENCE {
banSdlcConLocalInterface InterfaceIndexOrZero,
banSdlcConAddress SdlcAddress,
banSdlcConBanDlciMac MacAddress,
banSdlcConDlci Integer32,
banSdlcConState INTEGER,
banSdlcConVmac MacAddress,
banSdlcConBniAddress MacAddress,
banSdlcConFrLocalSap SAP,
banSdlcConFrRemoteSap SAP
}
banSdlcConLocalInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the physical interface the
SDLC Link Stations are connected to."
::= { frasBanSdlcConEntry 1 }
banSdlcConAddress OBJECT-TYPE
SYNTAX SdlcAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the poll address of the
secondary link station for this SDLC link.
It uniquely identifies the SDLC link station
within a single SDLC port."
::= { frasBanSdlcConEntry 2 }
banSdlcConBanDlciMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The End Station's target or Remote
mac-address."
::= { frasBanSdlcConEntry 3 }
banSdlcConDlci OBJECT-TYPE
SYNTAX Integer32 (16..1022)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Data Link Connection Identifier
for the corresponding LLC2 session
over Frame-Relay to the host."
::= { frasBanSdlcConEntry 4 }
banSdlcConState OBJECT-TYPE
SYNTAX INTEGER {
reset (1),
testSent (2),
xidexchg (3),
connrqsent (4),
sigstnwait (5),
connrspwait (6),
connrspsent (7),
contacted (8),
discwait (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the FRAS state of the Link Station.
reset - no activity
testSent- TEST Frames sent
xidexchg - XID exchange in progress
connrqsent - Connect request sent
sigstnwait - Signal station wait state
connrspwait - Connect response wait state
connrspsent - Connect response sent
contacted - Session established
discwait - Disconnect wait state"
::= { frasBanSdlcConEntry 5 }
banSdlcConVmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The End Station's virtual Mac-Address
which is comprised of a TR formatted
template and the SDLC Link Station
address appended on the last nibble."
::= { frasBanSdlcConEntry 6 }
banSdlcConBniAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BNI is Boundary Node Identifier which is
the FRAS-BAN connection's Remote address
in TR-format. It is by default 4fff.0000.0000"
::= { frasBanSdlcConEntry 7 }
banSdlcConFrLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FRAS router's Local SAP."
::= { frasBanSdlcConEntry 8 }
banSdlcConFrRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FRAS router's Remote SAP."
::= { frasBanSdlcConEntry 9 }
-- *************************************************************
-- * *
-- * THE FRAS BAN LLC2 CONNECTION TABLE *
-- * *
-- *************************************************************
frasBanLlcConTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrasBanLlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for each
LAN attached End Station in a FRAS-BAN
to LAN connection. The entries are from
endstations which have their destination
mac-addresses as the BAN-DLCI-MAC address."
::= { frasBanLlc 1 }
frasBanLlcConEntry OBJECT-TYPE
SYNTAX FrasBanLlcConEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for a
specific LAN attached End Station."
INDEX { banLlcEndstnLocalMac,
banLlcConLocalSap,
banLlcConRemoteSap,
banLlcBanDlciMac }
::= { frasBanLlcConTable 1 }
FrasBanLlcConEntry ::= SEQUENCE {
banLlcEndstnLocalMac MacAddress,
banLlcBanDlciMac MacAddress,
banLlcConLocalSap SAP,
banLlcConRemoteSap SAP,
banLlcConDlci Integer32,
banLlcConState INTEGER,
banLlcConFrInterface InterfaceIndexOrZero,
banLlcBniAddress MacAddress,
banLlcConFrLocalSap SAP,
banLlcConFrRemoteSap SAP
}
banLlcEndstnLocalMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the End Station's Local
Mac-Address."
::= { frasBanLlcConEntry 1 }
banLlcBanDlciMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the End Station's Remote
Mac-Address. It is also the FRAS-BAN connection's
Local Mac-Address."
::= { frasBanLlcConEntry 2 }
banLlcConLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The endstation's Local SAP."
::= { frasBanLlcConEntry 3 }
banLlcConRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The endstation's Remote SAP."
::= { frasBanLlcConEntry 4 }
banLlcConDlci OBJECT-TYPE
SYNTAX Integer32 (16..1022)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Data Link Connection Identifier
associated with the corresponding LLC2
session over Frame-Relay to the host."
::= { frasBanLlcConEntry 5 }
banLlcConState OBJECT-TYPE
SYNTAX INTEGER {
reset (1),
testSent (2),
xidexchg (3),
connrqsent (4),
sigstnwait (5),
connrspwait (6),
connrspsent (7),
contacted (8),
discwait (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the FRAS state of the Link Station.
reset - no activity
testSent- TEST Frames sent
xidexchg - XID exchange in progress
connrqsent - Connect request sent
sigstnwait - Signal station wait state
connrspwait - Connect response wait state
connrspsent - Connect response sent
contacted - Session established
discwait - Disconnect wait state"
::= { frasBanLlcConEntry 6 }
banLlcConFrInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Frame-Relay interface
for this particular session."
::= { frasBanLlcConEntry 7 }
banLlcBniAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the FRAS-BAN connection's Target
Mac-Address. It is by default 4fff.0000.0000"
::= { frasBanLlcConEntry 8 }
banLlcConFrLocalSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Local SAP of the corresponding LLC2
session over Frame-Relay to the host."
::= { frasBanLlcConEntry 9 }
banLlcConFrRemoteSap OBJECT-TYPE
SYNTAX SAP
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Remote SAP of the corresponding LLC2
session over Frame-Relay to the host."
::= { frasBanLlcConEntry 10 }
-- **********************************************************************
-- * CONFORMANCE INFORMATION *
-- **********************************************************************
ciscoDlcSwitchConformance OBJECT IDENTIFIER ::= { ciscoDlcSwitchMIB 2 }
ciscoDlcSwitchCompliances OBJECT IDENTIFIER ::= { ciscoDlcSwitchConformance 1 }
ciscoDlcSwitchGroups OBJECT IDENTIFIER ::= { ciscoDlcSwitchConformance 2 }
--
-- COMPLIANCE STATEMENTS
--
ciscoDlcSwitchCoreCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The core compliance statement for all FRAS connections."
MODULE
MANDATORY-GROUPS {
frasBnnSdlcGroup,
frasBnnLlcGroup,
frasBanSdlcGroup,
frasBanLlcGroup
}
::= { ciscoDlcSwitchCompliances 1 }
--
-- Core Conformance Groups for All Connection Components
--
frasBnnSdlcGroup OBJECT-GROUP
OBJECTS {
bnnSdlcConState,
bnnSdlcConDlci,
bnnSdlcConFRInterface,
bnnSdlcConLocalSap,
bnnSdlcConRemoteSap
}
STATUS current
DESCRIPTION
"The frasBnnSdlcGroup defines objects
which are common to the BNN SDLC of all
compliant connections."
::= { ciscoDlcSwitchGroups 1 }
frasBnnLlcGroup OBJECT-GROUP
OBJECTS {
bnnLlcConLanInterface,
bnnLlcConDlci,
bnnLlcConState,
bnnLlcConLocalMacAddress,
bnnLlcConFrLocalSap,
bnnLlcConFrRemoteSap
}
STATUS current
DESCRIPTION
"The frasBnnLlcGroup defines objects
which are common to the BNN LLC of all
compliant connections."
::= { ciscoDlcSwitchGroups 2 }
frasBanSdlcGroup OBJECT-GROUP
OBJECTS {
banSdlcConLocalInterface,
banSdlcConAddress,
banSdlcConBanDlciMac,
banSdlcConDlci,
banSdlcConState,
banSdlcConVmac,
banSdlcConBniAddress,
banSdlcConFrLocalSap,
banSdlcConFrRemoteSap
}
STATUS current
DESCRIPTION
"The frasBanSdlcGroup defines objects
which are common to the BAN SDLC of all
compliant connections."
::= { ciscoDlcSwitchGroups 3 }
frasBanLlcGroup OBJECT-GROUP
OBJECTS {
banLlcEndstnLocalMac,
banLlcBanDlciMac,
banLlcConDlci,
banLlcConLocalSap,
banLlcConRemoteSap,
banLlcConState,
banLlcConFrInterface,
banLlcBniAddress,
banLlcConFrLocalSap,
banLlcConFrRemoteSap
}
STATUS current
DESCRIPTION
"The frasBanLlcGroup defines objects
which are common to the BAN LLC of all
compliant connections."
::= { ciscoDlcSwitchGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink