MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-CCME-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

3545 lines
120 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- Cisco CallManager Express MIB
--
-- May 2005, Shanmukh Rao
--
-- Copyright (c) 2005, 2010 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-CCME-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Gauge32,
Unsigned32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
MacAddress,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddress,
InetAddressType,
InetPortNumber
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoCcmeMIB MODULE-IDENTITY
LAST-UPDATED "201004010000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ccme-srst@cisco.com"
DESCRIPTION
"This MIB allows management of Cisco CallManager Express
(CCME) feature in Cisco IOS. CCME is optional software
feature that enables Cisco routers to deliver Key System
or Hybrid PBX functionality for enterprise branch
offices or small businesses."
REVISION "201004010000Z"
DESCRIPTION
"1. Add ccmeEphonePrimaryDn in ccmeEphoneConfTable.
2. Deprecated ciscoCcmeMIBCompliance and added
ciscoCcmeMIBComplianceRev1 MODULE-COMPLIANCE.
3. Added ccmeConfigGroup1."
REVISION "200505310000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 439 }
-- CCME MIB Groups
ciscoCcmeMIBNotifs OBJECT IDENTIFIER
::= { ciscoCcmeMIB 0 }
ciscoCcmeMIBObjects OBJECT IDENTIFIER
::= { ciscoCcmeMIB 1 }
ciscoCcmeMIBConform OBJECT IDENTIFIER
::= { ciscoCcmeMIB 2 }
-- CCME MIB object groups
ccmeConfig OBJECT IDENTIFIER
::= { ciscoCcmeMIBObjects 1 }
ccmeActiveStats OBJECT IDENTIFIER
::= { ciscoCcmeMIBObjects 2 }
ccmeHistoryStats OBJECT IDENTIFIER
::= { ciscoCcmeMIBObjects 3 }
-- Textual Conventions
CcmeDigitPatternString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A E.164 address string limited to the character
set '0123456789*#.+ABCDT'. An address of length zero
indicates that no address is specified."
SYNTAX OCTET STRING (SIZE (0 | 32))
CcmeNightServiceCodeString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A code string limited to character set '0123456789*'
This code begins with first character as * (asteric)
and followed by at least one digit. Example - *9234
Users enters at an IP phone to disable or enable
night service."
SYNTAX OCTET STRING (SIZE (0 | 16))
-- CCME, Ephone and EphoneDN Configuration Group
--
-- Displays the current running configuration of CCME on this
-- gateway. Note: This MIB supports only the display.
ccmeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the Cisco CallManager Express
feature is enabled on the device.
'true' means that the CCME feature is enabled on
this device.
'false' means that the CCME feature is disabled."
::= { ccmeConfig 1 }
ccmeVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Cisco CallManager Express on
the device."
::= { ccmeConfig 2 }
ccmeIPAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type of ccmeIPAddress. Only IPv4 and IPv6
addresses are expected."
::= { ccmeConfig 3 }
ccmeIPAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the IP address through which the IP
phones communicate with CCME.
The type of this address is determined by the
value of the ccmeSysIPAddressType object.
This IP address is usually the IP address
bound to the Ethernet port on the gateway
to which the phones are connected."
::= { ccmeConfig 4 }
ccmePortNumber OBJECT-TYPE
SYNTAX InetPortNumber (2000..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the TCP port
number to use for Skinny Client Control
Protocol (SCCP).
This port also indicates through which
IP phones communicate with this device."
DEFVAL { 2000 }
::= { ccmeConfig 5 }
ccmeMaxEphones OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of IP phones allowed by the
configuration for the Cisco CallManager Express
on the device. Maximum permissible range is
IOS version and platform dependent.
A value of zero indicates no IP phones are permitted
to register to this device."
::= { ccmeConfig 6 }
ccmeMaxDirectoryNumber OBJECT-TYPE
SYNTAX Integer32 (0..288)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of
IP phones extensions (ephone-dns) or directory
numbers supported by this device.
Maximum permissible range is IOS version and
platform dependent. A value of zero indicates
no IP phones extensions could be created."
::= { ccmeConfig 7 }
ccmeMaxConferences OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of simultaneous three-party
conferences supported by the Cisco CallManager
Express on the device.
Range is IOS version and platform dependent.
With CCME Version 3.1, the following are the
maximum values for each platform -
Cisco 1750, Cisco 1751, Cisco 2600, Cisco 3640
- 8 conferences.
Cisco 3660, Cisco 3725, Cisco 3745
- 16 conferences.
Default is half the maximum number of simultaneous
three-party conferences for each platform.
A value of zero indicates no three-party conferences
allowed on this device."
::= { ccmeConfig 8 }
ccmeMaxRedirect OBJECT-TYPE
SYNTAX Integer32 (5..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of times that a
call can be redirected by call forwarding or
transfer within this device."
::= { ccmeConfig 9 }
ccmeScriptName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the session-level IVR
application script in Tool Command Language (TCL)
for all extensions (ephone-dns) in CCME system.
By default no application script is selected for
all extensions and the object length in this case
will return a zero length string."
::= { ccmeConfig 10 }
ccmeVoiceMailNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the E.164 phone number
that is associated with a voice-mail (speed-dial)
on this device.
If voice-mail number is not configured,
this object has a length of zero."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeConfig 11 }
ccmeMwiRelay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the device can relay
message-waiting indication (MWI) notification
to remote Cisco IP phones."
::= { ccmeConfig 12 }
ccmeMwiExpires OBJECT-TYPE
SYNTAX Integer32 (600..99999)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expiration time in seconds, for the registration
of the message-waiting indication (MWI) client
or server.
Range is 600 to 99999."
DEFVAL { 86400 }
::= { ccmeConfig 13 }
ccmeTransferSystem OBJECT-TYPE
SYNTAX INTEGER {
blind(1),
localConsult(2),
fullBlind(3),
fullConsult(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the call transfer method
for all configured Cisco IP phone extensions,
that use the ITU-T H.450.2 standard.
Call transfers that use the H.450.2 standard
can be 'blind' or 'consultative'.
A blind transfer is one in which the transferring
extension connects the caller to a destination
extension before ringback begins.
A consultative transfer is one in which the
transferring party either connects the caller
to a ringing phone (ringback heard) or speaks
with the third party before connecting the caller
to the third party.
blind - Calls are transferred without consultation
using a single phone line and the Cisco
proprietary method.
localConsult - Calls are transferred with local
consultation using the second phone line
if available, or the calls fall back to
blind for nonlocal consultation or transfer
target. This mode is intended for use
primarily in voice over Frame Relay networks.
fullBlind - Calls are transferred without
consultation using H.450.2 standard method.
fullConsult - Calls are transferred using H.450.2
with consultation using the second phone
line if available, or the calls fall back
to fullBlind if the second line is unavailable."
::= { ccmeConfig 14 }
ccmeTimeFormat OBJECT-TYPE
SYNTAX INTEGER {
twelve(1),
twentyfour(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time display format on Cisco IP phones in a
Cisco CallManager Express system.
twelve(1) - 12 hour clock.
twentyfour(2) - 24 hour clock."
::= { ccmeConfig 15 }
ccmeDateFormat OBJECT-TYPE
SYNTAX INTEGER {
mmddyy(1),
ddmmyy(2),
yymmdd(3),
yyddmm(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the date display format on
Cisco IP phones in a Cisco CallManager
Express system."
DEFVAL { mmddyy }
::= { ccmeConfig 16 }
ccmeUrlforServicesBtn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the URL information for
the 'Services' button on the Cisco IP phone display.
The Cisco IP Phone 7940 and Cisco IP phone 7960
can support four URL's in association with the
four programmable feature buttons on those IP
phones - Directories, Information, Messages and
Services. The fifth button, Settings, is managed
entirely by the phone. Operation of these services
is determined by the Cisco IP phone capabilities
and the content of the referenced URL."
::= { ccmeConfig 17 }
ccmeUrlforDirectoriesBtn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the URL information for
the 'Directories' button on the Cisco IP phone
display.
The Cisco IP Phone 7940 and Cisco IP phone 7960
can support four URL's in association with the
four programmable feature buttons on those IP
phones - Directories, Information, Messages and
Services. The fifth button, Settings, is managed
entirely by the phone. Operation of these services
is determined by the Cisco IP phone capabilities
and the content of the referenced URL."
::= { ccmeConfig 18 }
ccmeMohFlashFile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the audio file to
use for the Music on hold (MOH) audio stream.
Audio files that are used for MOH exist in the flash
file system on the device. A MOH file can be .au or .wav
file format. However, the file format must contain
8-bit 8-KHz data in a-law or mu-law.
Maximum length of filename is 128 characters long.
This object returns a zero length string if the MOH
from flash is not configured on this router."
::= { ccmeConfig 19 }
ccmeMohMulticastFromFlashEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether music-on-hold (MOH) multicast from
flash file source is enabled or disabled on this router.
If ccmeMohFlashFile is zero length this
object has no relevance."
::= { ccmeConfig 20 }
ccmeMohFlashMulticastIPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type of ccmeMohFlashMulticastIPAddr.
Only IPv4 and IPv6 addresses are expected."
::= { ccmeConfig 66 }
ccmeMohFlashMulticastIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the destination IP address
for multicast of the audio stream from Flash file,
that is designated for MOH. If ccmeMohFlashFile is
zero length this object has no relevance.
Cisco IP phones don not support multicast at
224.x.x.x addresses."
::= { ccmeConfig 21 }
ccmeMohFlashMulticastPortNum OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the media port for multicast
of the audio stream from Flash file that is
designated for MOH. This object has no relevance
if ccmeMohMulticastFromFlash object is zero length."
::= { ccmeConfig 22 }
ccmePhoneFirmwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmePhoneFirmwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of firmware load configured for each
IP Phone on this device."
::= { ccmeConfig 23 }
ccmePhoneFirmwareEntry OBJECT-TYPE
SYNTAX CcmePhoneFirmwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on an Cisco IP phone type and its
configured firmware load.
There is an entry in this table for each IP Phone
type firmware that is configured on this device."
INDEX { ccmePhoneFirmwareIndex }
::= { ccmePhoneFirmwareTable 1 }
CcmePhoneFirmwareEntry ::= SEQUENCE {
ccmePhoneFirmwareIndex Integer32,
ccmePhoneType SnmpAdminString,
ccmePhoneFirmwareRev SnmpAdminString
}
ccmePhoneFirmwareIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmePhoneFirmwareEntry."
::= { ccmePhoneFirmwareEntry 1 }
ccmePhoneType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type or model of Cisco IP phone.
Cisco IP Phone types are 7902, 7905, 7910, 7912,
7914, 7920, 7935, 7936, 7940, 7960, ATA-186, ATA-188"
::= { ccmePhoneFirmwareEntry 2 }
ccmePhoneFirmwareRev OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific firmware revision string
configured for the Cisco IP phone on this device."
::= { ccmePhoneFirmwareEntry 3 }
ccmeTransferPatternTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeTransferPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of transfer patterns configured
on this device."
::= { ccmeConfig 24 }
ccmeTransferPatternEntry OBJECT-TYPE
SYNTAX CcmeTransferPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a transfer pattern configured.
There is an entry in this table for each
transfer pattern that is configured on this device."
INDEX { ccmeTransferPatternIndex }
::= { ccmeTransferPatternTable 1 }
CcmeTransferPatternEntry ::= SEQUENCE {
ccmeTransferPatternIndex Integer32,
ccmeTransferPattern SnmpAdminString,
ccmeTransferPatternType INTEGER
}
ccmeTransferPatternIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeTransferPatternEntry."
::= { ccmeTransferPatternEntry 1 }
ccmeTransferPattern OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"String of digits for permitted call transfers."
::= { ccmeTransferPatternEntry 2 }
ccmeTransferPatternType OBJECT-TYPE
SYNTAX INTEGER {
blind(1),
h4502(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the pattern for call transfer.
'blind(1)' indicates blind transfer pattern.
'h4502(2)' indicates H.450.2 consultative call transfer."
::= { ccmeTransferPatternEntry 3 }
ccmeWebGUIEditEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Cisco CallManager Express web-based
Graphical User Interface (GUI) is allowed to add
extensions (ephone-dns)."
::= { ccmeConfig 25 }
ccmeWebGUITimeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates Cisco CallManager Express web-based
Graphical User Interface (GUI) is allowed to change
or set time on this device."
::= { ccmeConfig 26 }
ccmeAfterHrsBlockPatternTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeAfterHrsBlockPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of after hour block patterns configured on
this device."
::= { ccmeConfig 27 }
ccmeAfterHrsBlockPatternEntry OBJECT-TYPE
SYNTAX CcmeAfterHrsBlockPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a configured after hours block
pattern.
There is an entry in this table for each
after hours block that is configured on
this device."
INDEX { ccmeAfterHrsBlockPatternTag }
::= { ccmeAfterHrsBlockPatternTable 1 }
CcmeAfterHrsBlockPatternEntry ::= SEQUENCE {
ccmeAfterHrsBlockPatternTag Integer32,
ccmeAfterHrsBlockPattern CcmeDigitPatternString,
ccmeAfterHrsBlockPatternAllTime TruthValue
}
ccmeAfterHrsBlockPatternTag OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An unique identifier tag configured for a pattern."
::= { ccmeAfterHrsBlockPatternEntry 1 }
ccmeAfterHrsBlockPattern OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configured string of outgoing call
digits that will be matched for blocking call at
specified after hours.
Example - 9011"
::= { ccmeAfterHrsBlockPatternEntry 2 }
ccmeAfterHrsBlockPatternAllTime OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether after hours block pattern is
applicable all time.
'true' means ccmeAfterHrsBlockPattern
pattern will always be applied, 7 days a week,
24 hours a day.
'false' means ccmeAfterHrsBlockPattern pattern
will be blocked during the days and dates defined by
ccmeAfterHrsBlockDateTable and
ccmeAfterHrsBlockDayTable objects."
::= { ccmeAfterHrsBlockPatternEntry 3 }
ccmeAfterHrsBlockDateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeAfterHrsBlockDateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of recurring time period based on date during
which outgoing calls that match defined block patterns
are blocked on IP phones."
::= { ccmeConfig 28 }
ccmeAfterHrsBlockDateEntry OBJECT-TYPE
SYNTAX CcmeAfterHrsBlockDateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a configured after hour block pattern
date. There is an entry in this table for each entry
that is configured on this device. An entry is deleted
from this table once an after hour block configuration
is removed from this device."
INDEX { ccmeAfterHrsBlockDateIndex }
::= { ccmeAfterHrsBlockDateTable 1 }
CcmeAfterHrsBlockDateEntry ::= SEQUENCE {
ccmeAfterHrsBlockDateIndex Integer32,
ccmeAfterHrsBlockDateMonth INTEGER,
ccmeAfterHrsBlockDate Integer32,
ccmeAfterHrsBlockDateStartHour Integer32,
ccmeAfterHrsBlockDateStartMin Integer32,
ccmeAfterHrsBlockDateStopHour Integer32,
ccmeAfterHrsBlockDateStopMin Integer32
}
ccmeAfterHrsBlockDateIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeAfterHrsBlockDateEntry."
::= { ccmeAfterHrsBlockDateEntry 1 }
ccmeAfterHrsBlockDateMonth OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the month of the year during which
the 'after hours block' service is active."
::= { ccmeAfterHrsBlockDateEntry 2 }
ccmeAfterHrsBlockDate OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the day of the month during which
the 'after hours block' service is activated."
::= { ccmeAfterHrsBlockDateEntry 3 }
ccmeAfterHrsBlockDateStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
the 'after hours block' service is activated."
::= { ccmeAfterHrsBlockDateEntry 4 }
ccmeAfterHrsBlockDateStartMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeAfterHrsBlockDateStartHour from which the 'after
hours block' service is activated."
::= { ccmeAfterHrsBlockDateEntry 5 }
ccmeAfterHrsBlockDateStopHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
during which the 'after hours block' service
is deactivated."
::= { ccmeAfterHrsBlockDateEntry 6 }
ccmeAfterHrsBlockDateStopMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeAfterHrsBlockDateStopHour after which the 'after
hours block' service is deactivated."
::= { ccmeAfterHrsBlockDateEntry 7 }
ccmeAfterHrsBlockDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeAfterHrsBlockDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of recurring time period based on day of week
during which outgoing calls that match defined block
patterns are blocked on IP phones."
::= { ccmeConfig 29 }
ccmeAfterHrsBlockDayEntry OBJECT-TYPE
SYNTAX CcmeAfterHrsBlockDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a configured after hour block pattern
day. There is an entry in this table for each entry
that is configured on this device. An entry is deleted
from this table once an 'after hour block' day
configuration is removed from this device."
INDEX { ccmeAfterHrsBlockDayIndex }
::= { ccmeAfterHrsBlockDayTable 1 }
CcmeAfterHrsBlockDayEntry ::= SEQUENCE {
ccmeAfterHrsBlockDayIndex Integer32,
ccmeAfterHrsBlockDay INTEGER,
ccmeAfterHrsBlockDayStartHour Integer32,
ccmeAfterHrsBlockDayStartMin Integer32,
ccmeAfterHrsBlockDayStopHour Integer32,
ccmeAfterHrsBlockDayStopMin Integer32
}
ccmeAfterHrsBlockDayIndex OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeAfterHrsBlockDayEntry."
::= { ccmeAfterHrsBlockDayEntry 1 }
ccmeAfterHrsBlockDay OBJECT-TYPE
SYNTAX INTEGER {
sun(1),
mon(2),
tue(3),
wed(4),
thu(5),
fri(6),
sat(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the day of the week during which
the 'after hours block' service is active."
::= { ccmeAfterHrsBlockDayEntry 2 }
ccmeAfterHrsBlockDayStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
the 'after hours block' service is activated."
::= { ccmeAfterHrsBlockDayEntry 3 }
ccmeAfterHrsBlockDayStartMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeAfterHrsBlockDayStartHour from which the 'after
hours block' service is activated."
::= { ccmeAfterHrsBlockDayEntry 4 }
ccmeAfterHrsBlockDayStopHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
during which the 'after hours block' service
is deactivated."
::= { ccmeAfterHrsBlockDayEntry 5 }
ccmeAfterHrsBlockDayStopMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeAfterHrsBlockDayStopHour after which the 'after
hours block' service is deactivated."
::= { ccmeAfterHrsBlockDayEntry 6 }
ccmeNightServiceCode OBJECT-TYPE
SYNTAX CcmeNightServiceCodeString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configured night service
code that disables or enables night service on
IP phones. The code is the digit code that a user
enters at an IP phone to disable or enable
night service. The code begins with '*' (asterisk)."
::= { ccmeConfig 30 }
ccmeNightServiceDateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeNightServiceDateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of recurring time period based on
date of month during which night service is active."
::= { ccmeConfig 31 }
ccmeNightServiceDateEntry OBJECT-TYPE
SYNTAX CcmeNightServiceDateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a configured night service date pattern.
There is an entry in this table for each entry that is
configured on this device. An entry is deleted from this
table once a night service configuration is removed
from this device."
INDEX { ccmeNightServiceDateIndex }
::= { ccmeNightServiceDateTable 1 }
CcmeNightServiceDateEntry ::= SEQUENCE {
ccmeNightServiceDateIndex Integer32,
ccmeNightServiceDateMonth INTEGER,
ccmeNightServiceDate Integer32,
ccmeNightServiceDateStartHour Integer32,
ccmeNightServiceDateStartMin Integer32,
ccmeNightServiceDateStopHour Integer32,
ccmeNightServiceDateStopMin Integer32
}
ccmeNightServiceDateIndex OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeNightServiceDateEntry."
::= { ccmeNightServiceDateEntry 1 }
ccmeNightServiceDateMonth OBJECT-TYPE
SYNTAX INTEGER {
jan(1),
feb(2),
mar(3),
apr(4),
may(5),
jun(6),
jul(7),
aug(8),
sep(9),
oct(10),
nov(11),
dec(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the month of the year during which
the night service is active."
::= { ccmeNightServiceDateEntry 2 }
ccmeNightServiceDate OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the day of the month during which
the night service is activated."
::= { ccmeNightServiceDateEntry 3 }
ccmeNightServiceDateStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the date during which
the night service is activated."
::= { ccmeNightServiceDateEntry 4 }
ccmeNightServiceDateStartMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeNightServiceDateStartHour during which the
night service is activated."
::= { ccmeNightServiceDateEntry 5 }
ccmeNightServiceDateStopHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the date during which
during which the night service is deactivated."
::= { ccmeNightServiceDateEntry 6 }
ccmeNightServiceDateStopMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeNightServiceDateStopHour during which the
night service is deactivated."
::= { ccmeNightServiceDateEntry 7 }
ccmeNightServiceDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeNightServiceDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of recurring time period associated with
a day of the week during which night service is
active."
::= { ccmeConfig 32 }
ccmeNightServiceDayEntry OBJECT-TYPE
SYNTAX CcmeNightServiceDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a configured night service day
pattern. There is an entry in this table for each
entry that is configured on this device. An entry
is deleted from this table once a night service
configuration is removed from this device."
INDEX { ccmeNightServiceDayIndex }
::= { ccmeNightServiceDayTable 1 }
CcmeNightServiceDayEntry ::= SEQUENCE {
ccmeNightServiceDayIndex Integer32,
ccmeNightServiceDay INTEGER,
ccmeNightServiceDayStartHour Integer32,
ccmeNightServiceDayStartMin Integer32,
ccmeNightServiceDayStopHour Integer32,
ccmeNightServiceDayStopMin Integer32
}
ccmeNightServiceDayIndex OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeNightServiceDayEntry."
::= { ccmeNightServiceDayEntry 1 }
ccmeNightServiceDay OBJECT-TYPE
SYNTAX INTEGER {
sun(1),
mon(2),
tue(3),
wed(4),
thu(5),
fri(6),
sat(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the day of the week during which
the night service is active."
::= { ccmeNightServiceDayEntry 2 }
ccmeNightServiceDayStartHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
the night service is activated."
::= { ccmeNightServiceDayEntry 3 }
ccmeNightServiceDayStartMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeNightServiceDayStartHour during which the
night service is activated."
::= { ccmeNightServiceDayEntry 4 }
ccmeNightServiceDayStopHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hour of the day during which
during which the night service is deactivated."
::= { ccmeNightServiceDayEntry 5 }
ccmeNightServiceDayStopMin OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the minute in the
ccmeNightServiceDayStopHour during which the
night service is deactivated."
::= { ccmeNightServiceDayEntry 6 }
ccmeFXOHookFlashEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Flash soft key display on IP Phone
is enabled.
Flash softkey is provided Cisco IP phones 7940 and
7960 users on Foreign Exchange Office (FXO) lines
attached to the Cisco CallManager Express system.
'true' means Flash soft key display on IP Phones is
enabled.
'false' means that the Flash soft key on IP phones
is not displayed in a Cisco CallManager Express system."
::= { ccmeConfig 33 }
ccmeSecondaryDialTonePrefix OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates secondary dial tone access prefix digit
string. If secondary dial tone is not configured on
this device, in such case the object returns a zero
length string. Example - 9."
::= { ccmeConfig 34 }
ccmeWebAdminSystemUser OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates login username for a Cisco CallManager
Express system administrator."
::= { ccmeConfig 35 }
ccmeWebAdminCustomerUser OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates login username for a Cisco CallManager
Express customer administrator."
::= { ccmeConfig 36 }
ccmeSystemMessage OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configured text system message for
display on idle Cisco IP phone 7940's and 7960's in
a Cisco CallManager Express system.
The text message is Alpha numeric string of up
to 32 characters to disply when the phone is idle."
::= { ccmeConfig 37 }
ccmeDialplanPatternTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeDialplanPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Dialplan patterns configured
on this device."
::= { ccmeConfig 38 }
ccmeDialplanPatternEntry OBJECT-TYPE
SYNTAX CcmeDialplanPatternEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information on a dialplan pattern configured.
There is an entry in this table for each Dialplan
Pattern that is configured on this device."
INDEX { ccmeDialplanPatternIndex }
::= { ccmeDialplanPatternTable 1 }
CcmeDialplanPatternEntry ::= SEQUENCE {
ccmeDialplanPatternIndex Integer32,
ccmeDialplanPatternTag Integer32,
ccmeDialplanExtLength Integer32,
ccmeDialplanPattern CcmeDigitPatternString,
ccmeDialplanExtPattern CcmeDigitPatternString,
ccmeDialplanAllowRegiEnabled TruthValue
}
ccmeDialplanPatternIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
ccmeDialplanPatternTable."
::= { ccmeDialplanPatternEntry 1 }
ccmeDialplanPatternTag OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number that identifies the
dial-plan pattern."
::= { ccmeDialplanPatternEntry 2 }
ccmeDialplanExtLength OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates length of digit extension for Dial plan
pattern extension."
::= { ccmeDialplanPatternEntry 3 }
ccmeDialplanPattern OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates string of digits forming a dial-plan
pattern, such as the area code, the prefix,
and the first one or two digits of the extension
number, plus wild card markers or dots (.) for the
remainder of the extension number digits.
Example - 40854....."
::= { ccmeDialplanPatternEntry 4 }
ccmeDialplanExtPattern OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates string of digits forming the extension
number leading digit pattern that are used when the
leading digits of the extension number are different
from the E.164 telephone number leading digits
defined by the ccmeDialplanPattern object."
::= { ccmeDialplanPatternEntry 5 }
ccmeDialplanAllowRegiEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the E.164 number in the dial peer
is allowed to register with the gatekeeper.
'true' means that the registration is allowed.
'false' means that the registration is disabled."
::= { ccmeDialplanPatternEntry 6 }
ccmeKeepAliveTimeout OBJECT-TYPE
SYNTAX Integer32 (10..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of time interval
between successive keepalive messages
from this device to IP phones."
DEFVAL { 30 }
::= { ccmeConfig 39 }
ccmeInterDigitTimeout OBJECT-TYPE
SYNTAX Integer32 (2..120)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of time interval
for interdigit timeout for Cisco IP phones."
DEFVAL { 10 }
::= { ccmeConfig 40 }
ccmeBusyTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates amount of wait time after which the
call is disconnected from a busy signal."
DEFVAL { 10 }
::= { ccmeConfig 41 }
ccmeAlertTimeout OBJECT-TYPE
SYNTAX Integer32 (5..60000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of time interval for which
Cisco CallManager Express allows the IP phone to
alert (ring) if a call is not answered."
DEFVAL { 180 }
::= { ccmeConfig 42 }
-- Ephone Configuration Table
--
-- This table indicates configuration information about each
-- configured IP phone (Ephone) on this device.
ccmeEphoneConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP phones (Ephones or EthernetPhones)
configured on this device."
::= { ccmeConfig 43 }
ccmeEphoneConfEntry OBJECT-TYPE
SYNTAX CcmeEphoneConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a configured IP phone.
There is an entry in this table for each IP Phone
that is configured on this device.
An entry is deleted in this table once an IP Phone
configuration is removed from this device."
INDEX { ccmeEphoneTag }
::= { ccmeEphoneConfTable 1 }
CcmeEphoneConfEntry ::= SEQUENCE {
ccmeEphoneTag Integer32,
ccmeEphoneIpAddressType InetAddressType,
ccmeEphoneIpAddress InetAddress,
ccmeEphoneMacAddress MacAddress,
ccmeEphoneModel SnmpAdminString,
ccmeEphoneUsername SnmpAdminString,
ccmeEphoneKeepAlive Integer32,
ccmeEphoneAutoLineOut Integer32,
ccmeEphonePagingDn Integer32,
ccmeEphoneAddon Integer32,
ccmeEphoneTemplate Integer32,
ccmeEphonePagingPolicy INTEGER,
ccmeEphoneKeyPhone TruthValue,
ccmeEphoneAutoLineInEnabled TruthValue,
ccmeEphoneAftHrsBlkExmptEnabled TruthValue,
ccmeEphoneNightBellSvcEnabled TruthValue,
ccmeEphoneKeepConfEnabled TruthValue,
ccmeEphonePrimaryDn Unsigned32
}
ccmeEphoneTag OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An number that uniquely identifies a IP phone
configured on the device.
The maximum number of Ephone entries varies among
Cisco IOS platforms and may be less than 120."
::= { ccmeEphoneConfEntry 1 }
ccmeEphoneIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type of ccmeEphoneIpAddress. Only IPv4 and IPv6
addresses are expected."
::= { ccmeEphoneConfEntry 2 }
ccmeEphoneIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the designated IP address to this Cisco
IP phone (Ephone) configured on this device."
::= { ccmeEphoneConfEntry 3 }
ccmeEphoneMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of a Cisco IP phone."
::= { ccmeEphoneConfEntry 4 }
ccmeEphoneModel OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type and model of Cisco IP phone."
::= { ccmeEphoneConfEntry 5 }
ccmeEphoneUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the username of the local Cisco
IP phone user. Default is 'Admin'.
The login account allows a phone user to
access a web-based GUI to view information
and change some personal settings for the
phone user's own phone only. A login account
is also required for users of Telephony
Application Programming Interface (TAPI)
aware PC applications, which can register
with this device and exercise
remote-control operations of Cisco IP phones."
::= { ccmeEphoneConfEntry 6 }
ccmeEphoneKeepAlive OBJECT-TYPE
SYNTAX Integer32 (10..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time interval between successive
keepalive messages from this device to this
particular IP phone.
If the router fails to receive three successive
keepalive messages, it considers the phone to be
out of service until the phone re-registers."
DEFVAL { 30 }
::= { ccmeEphoneConfEntry 7 }
ccmeEphoneAutoLineOut OBJECT-TYPE
SYNTAX Integer32 (0..34)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the line (Ephone-DN) that will be selected
for out going calls when this Cisco IP phone
goes off-hook."
::= { ccmeEphoneConfEntry 8 }
ccmeEphonePagingDn OBJECT-TYPE
SYNTAX Integer32 (1..208)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the audio paging DN group configured
for this Cisco IP phone."
::= { ccmeEphoneConfEntry 9 }
ccmeEphoneAddon OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of add on modules (Cisco
IP phone 7914) that are attached to this phone."
::= { ccmeEphoneConfEntry 10 }
ccmeEphoneTemplate OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Ephone template tag associated
with this IP phone."
::= { ccmeEphoneConfEntry 11 }
ccmeEphonePagingPolicy OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates paging mechanism associated with this
Cisco IP phone.
unicast(1) - Indicates the Cisco IP phone is not
capable of receiving audio paging through
multicast and requests that all pages to
this phone be sent through unicast.
multicast(2) - Audio paging is transmitted to the Cisco
IP phone using multicast."
::= { ccmeEphoneConfEntry 12 }
ccmeEphoneKeyPhone OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the phone is marked as 'Key'
IP phone.
'true' indicates IP phone is configured as Key
IP phone.
'false' indicates IP phone is not configured as
key IP phone."
::= { ccmeEphoneConfEntry 13 }
ccmeEphoneAutoLineInEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates automatic line (Ephone-Dn) selection for
incoming call is available.
'true' indicates automatic line selection for
incoming calls is enabled.
'false' indicates auto-line selection for incoming
calls on this Cisco IP phone is disabled."
::= { ccmeEphoneConfEntry 14 }
ccmeEphoneAftHrsBlkExmptEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this Cisco IP phone is exempt
from after-hours blocking.
'true' indicates this Cisco IP phone is exempt
from after-hour blocking.
'false' indicates is this Cisco IP phone is included
in after-hour blocking."
::= { ccmeEphoneConfEntry 15 }
ccmeEphoneNightBellSvcEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates night-bell service is available on this
Cisco IP Phone.
'true' indicates night-bell service is enabled for
this IP phone.
'false' indicates night-bell service is disabled."
::= { ccmeEphoneConfEntry 16 }
ccmeEphoneKeepConfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the call would be disconnected
when conference initiator hangs-up.
'true' - Indicates not to disconnect conference when
conference initiator hangs-up.
Connect remaining parties together
directly using call transfer.
'false' - Disconnect conference when initiator
hangs-up."
::= { ccmeEphoneConfEntry 17 }
ccmeEphonePrimaryDn OBJECT-TYPE
SYNTAX Unsigned32 (0..208)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the primary extension DN (Ephone-Dn) for
this Cisco IP phone.
Zero value indicates no primary extension DN is set for this IP
phone"
::= { ccmeEphoneConfEntry 18 }
-- Ephone Speed-dial configuration Table
ccmeEphoneSpeedDialConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneSpeedDialConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about configured speed dial entries
for all IP phones."
::= { ccmeConfig 44 }
ccmeEphoneSpeedDialConfEntry OBJECT-TYPE
SYNTAX CcmeEphoneSpeedDialConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about all configured speed dial
entries for an IP phone.
There is an entry created for each Speed Dial
configured on this device. An entry is deleted
from this table when the speed dial configuration
is removed."
INDEX {
ccmeEphoneTag,
ccmeEphoneSpeedDialTableIndex
}
::= { ccmeEphoneSpeedDialConfTable 1 }
CcmeEphoneSpeedDialConfEntry ::= SEQUENCE {
ccmeEphoneSpeedDialTableIndex Integer32,
ccmeEphoneSpeedDialTag Integer32,
ccmeEphoneSpeedDialNumber CcmeDigitPatternString,
ccmeEphoneSpeedDialLabel SnmpAdminString
}
ccmeEphoneSpeedDialTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..34)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeEphoneSpeedDialConfEntry."
::= { ccmeEphoneSpeedDialConfEntry 1 }
ccmeEphoneSpeedDialTag OBJECT-TYPE
SYNTAX Integer32 (1..34)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An unique identifier tag configured for a
speed-dial entry."
::= { ccmeEphoneSpeedDialConfEntry 2 }
ccmeEphoneSpeedDialNumber OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the configured speed dial
E.164 phone extension number that is associated
with a line (ephone-dn) on this Cisco IP phone."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneSpeedDialConfEntry 3 }
ccmeEphoneSpeedDialLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the text to be displayed next to the
speed-dial button on Cisco IP Phone."
::= { ccmeEphoneSpeedDialConfEntry 4 }
-- Ephone Fast-dial configuration Table
ccmeEphoneFastDialConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneFastDialConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about configured fast dial entries
for all IP phones."
::= { ccmeConfig 45 }
ccmeEphoneFastDialConfEntry OBJECT-TYPE
SYNTAX CcmeEphoneFastDialConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about all configured fast dial
entries for an IP phone.
There is an entry created in this table for
each Fast dial configured on this device.
An entry is deleted from this table when Fast
dial configuration is removed from this device."
INDEX {
ccmeEphoneTag,
ccmeEphoneFastDialTableIndex
}
::= { ccmeEphoneFastDialConfTable 1 }
CcmeEphoneFastDialConfEntry ::= SEQUENCE {
ccmeEphoneFastDialTableIndex Integer32,
ccmeEphoneFastDialNumber CcmeDigitPatternString,
ccmeEphoneFastDialName SnmpAdminString
}
ccmeEphoneFastDialTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..24)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeEphoneFastDialConfEntry."
::= { ccmeEphoneFastDialConfEntry 1 }
ccmeEphoneFastDialNumber OBJECT-TYPE
SYNTAX CcmeDigitPatternString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the configured fast dial
E.164 phone extension number that is
associated with this Cisco IP phone.
No primary number is associated as a default."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneFastDialConfEntry 2 }
ccmeEphoneFastDialName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the configured name associated
with this fast dial E.164 phone extension number that
is associated with this Cisco IP phone.
When no name is associated, in that
case this object will return a string length of zero."
::= { ccmeEphoneFastDialConfEntry 3 }
-- Ephone button and DN association Configuration Table
-- Note: This table shows the rouge phones, that are registered
-- but not associated with any lines.
ccmeEphoneBtnDNAssocConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneBtnDNAssocConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about all configured DN and button
association for all IP phones."
::= { ccmeConfig 46 }
ccmeEphoneBtnDNAssocConfEntry OBJECT-TYPE
SYNTAX CcmeEphoneBtnDNAssocConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a configured DN and button
association entries for an IP phone.
There is an entry in this table for each DN and
button association that is configured on
this device.
An entry is deleted once the configuration is
deleted from this device."
INDEX {
ccmeEphoneTag,
ccmeEphoneButtonNumber
}
::= { ccmeEphoneBtnDNAssocConfTable 1 }
CcmeEphoneBtnDNAssocConfEntry ::= SEQUENCE {
ccmeEphoneButtonNumber Integer32,
ccmeEphoneOverlayDN SnmpAdminString
}
ccmeEphoneButtonNumber OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The button number of an IP phone."
::= { ccmeEphoneBtnDNAssocConfEntry 1 }
ccmeEphoneOverlayDN OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the overlay DN's configured
for this button on this IP phone."
::= { ccmeEphoneBtnDNAssocConfEntry 2 }
-- Ephone-dn Table
--
-- This table indicates information about each configured line
ccmeEphoneDnConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneDnConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configured Ephone-DN's (Directory Number
or extensions) for Cisco IP phone lines on this device."
::= { ccmeConfig 47 }
ccmeEphoneDnConfigEntry OBJECT-TYPE
SYNTAX CcmeEphoneDnConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about each configured extension/DN.
There is an entry in this table for each Ephone DN
configured on this device. In SRST (Survivable Remote
Site Telephone) mode, an entry is created for each
Ephone-DN automatically generated. An entry is deleted
from this table if the Ephone-DN is un-configured
on this device."
INDEX { ccmeEphoneDnTag }
::= { ccmeEphoneDnConfigTable 1 }
CcmeEphoneDnConfigEntry ::= SEQUENCE {
ccmeEphoneDnTag Integer32,
ccmeEphoneDnType INTEGER,
ccmeEphoneDnMode INTEGER,
ccmeEphoneDnPriNum SnmpAdminString,
ccmeEphoneDnSecNum SnmpAdminString,
ccmeEphoneDnName SnmpAdminString,
ccmeEphoneDnLabel SnmpAdminString,
ccmeEphoneDnPriPref Integer32,
ccmeEphoneDnSecPref Integer32,
ccmeEphoneDnCFBusyNum SnmpAdminString,
ccmeEphoneDnCFAllNum SnmpAdminString,
ccmeEphoneDnCFNoAnNum SnmpAdminString,
ccmeEphoneDnCFNoAnTo Integer32,
ccmeEphoneDnMwiCapability INTEGER,
ccmeEphoneDnHuntstop TruthValue,
ccmeEphoneDnHuntstopCh TruthValue,
ccmeEphoneDnHoldAltTo Integer32,
ccmeEphoneDnHoldAltType INTEGER,
ccmeEphoneDnMwiSipSubscrEnabled TruthValue,
ccmeEphoneDnScriptName SnmpAdminString
}
ccmeEphoneDnTag OBJECT-TYPE
SYNTAX Integer32 (1..288)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique sequence number that indicates an Cisco
IP phone extension (ephone-dn) configured on
this device."
::= { ccmeEphoneDnConfigEntry 1 }
ccmeEphoneDnType OBJECT-TYPE
SYNTAX INTEGER {
extension(1),
intercom(2),
paging(3),
moh(4),
mwi(5),
parkslot(6),
loopback(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extension type of the line.
extension(1) - Cisco IP Phone line.
intercom(2) - Part of pair of intercom line.
paging(3) - type to receive audio pages.
moh(4) - type to address MoH.
mwi(5) - type to address MWI.
parkslot(6) - type to address call park slot.
loopback(7) - loopback directory number."
::= { ccmeEphoneDnConfigEntry 2 }
ccmeEphoneDnMode OBJECT-TYPE
SYNTAX INTEGER {
single(1),
dual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mode of the line.
single(1) - Single line mode.
dual(2) - Dual line mode, that has one virtual
voice port and two channels to handle
two independent calls. This capacity
allows call waiting, call transfer
and conference functions within a
single line (ephone-dn)."
::= { ccmeEphoneDnConfigEntry 3 }
ccmeEphoneDnPriNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the primary E.164 phone
extension number that is associated with a line
(ephone-dn) on this device.
No primary number is associated as a default."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneDnConfigEntry 4 }
ccmeEphoneDnSecNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the second E.164 phone extension number
that is associated with a line (ephone-dn)
on this device."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneDnConfigEntry 5 }
ccmeEphoneDnName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the person
associated with this extension (ephone-dn).
If no specific name of person is associated with
the IP phone, then this object will contain
a zero-length string."
::= { ccmeEphoneDnConfigEntry 6 }
ccmeEphoneDnLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the text string that
is displayed on the Cisco IP phone console
instead of the extension phone number."
::= { ccmeEphoneDnConfigEntry 7 }
ccmeEphoneDnPriPref OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the preference
for the primary number associated with
an extension.
Range is from 0 to 10, where 0 is highest
and 10 is lowest."
::= { ccmeEphoneDnConfigEntry 8 }
ccmeEphoneDnSecPref OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the preference
for the secondary number associated with
an extension.
Range is from 0 to 10, where 0 is highest
and 10 is lowest."
::= { ccmeEphoneDnConfigEntry 9 }
ccmeEphoneDnCFBusyNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to busy extension.
If no specific call forwarding phone number
is associated with the IP phone, then this object
will contain a zero-length string."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneDnConfigEntry 10 }
ccmeEphoneDnCFAllNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to an extension (ephone-dn).
If no specific call forwarding all phone number is
associated with the IP phone, then this object
will contain a zero-length string."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneDnConfigEntry 11 }
ccmeEphoneDnCFNoAnNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to an extension (ephone-dn) that does not
answer.
If no specific call forwarding number when extension
does not answer is associated, then this object
will contain a zero-length string."
REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10"
::= { ccmeEphoneDnConfigEntry 12 }
ccmeEphoneDnCFNoAnTo OBJECT-TYPE
SYNTAX Integer32 (3..60000)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the duration that a call can ring
with no answer before the call is forwarded to
another extension/line/DN."
::= { ccmeEphoneDnConfigEntry 13 }
ccmeEphoneDnMwiCapability OBJECT-TYPE
SYNTAX INTEGER {
mwiOn(1),
mwiOff(2),
mwiOnoff(3),
mwiDisabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the capability of an extension (ephone-dn)
to process message-waiting indication (MWI)
notification from an external voice-messaging systems.
mwiOn - Extension can process MWI ON notifications
using either the main or secondary phone number.
mwiOff - Extension can process MWI OFF notifications
using either the main or secondary phone number.
mwiOnOff - Extension can process both MWI ON and OFF
notifications using either the main or
secondary phone number.
mwiDisabled - MWI notifications are disabled on
an extension."
::= { ccmeEphoneDnConfigEntry 14 }
ccmeEphoneDnHuntstop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the call hunting behavior for an extension
(ephone-dn). If the value of this object is 'true',
an incoming call does not roll over (hunt) to another
ephone-dn if the called ephone-dn is busy or does not
answer and a hunting strategy has been established that
includes this ephone-dn."
::= { ccmeEphoneDnConfigEntry 15 }
ccmeEphoneDnHuntstopCh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the call hunting behavior for an
extension (ephone-dn) channel. If this object
is enabled on dual-line extensions, an incoming
call does not roll over (hunt) to another
channel if the first channel is busy or does not
answer on this ephone-dn."
::= { ccmeEphoneDnConfigEntry 16 }
ccmeEphoneDnHoldAltTo OBJECT-TYPE
SYNTAX Integer32 (0..300)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates time out for repeating audible alert
notification when a call is on hold on a Cisco IP
phone.
Range is 15 to 300.
By default hold alert feature is disabled.
In such case, this object will return a zero value."
::= { ccmeEphoneDnConfigEntry 17 }
ccmeEphoneDnHoldAltType OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
originator(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates when hold alert audible notification will
be repeated on a Cisco IP phone.
idle(1) - Alerts only when the Cisco IP phone is idle.
originator(2) - Alerts when the Cisco IP phone is idle
or busy.
shared(3) - Alerts only when the Cisco IP phone is idle
but alerts all phones that share the line."
::= { ccmeEphoneDnConfigEntry 18 }
ccmeEphoneDnMwiSipSubscrEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this extension (DN) in a
Cisco CallManager Express system is subscribed
to a SIP-based MWI server.
'true' indicates this extension can receive MWI
from SIP-based MWI server.
'false' indicates extension is not subscribed
to receive MWI."
::= { ccmeEphoneDnConfigEntry 19 }
ccmeEphoneDnScriptName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the session-level IVR application script
in Tool Command Language (TCL) for this extension
(ephone-dn) in CCME system.
By default no application script is selected for
an extension and the object length in this case
will return a string of zero length."
::= { ccmeEphoneDnConfigEntry 20 }
-- Notification Configuration
ccmeNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces the
Cisco CallManager Express notifications.
When this variable is 'true', generation of
CCME notifications are enabled.
When this variable is 'false', generation of
CCME notifications is disabled."
DEFVAL { true }
::= { ccmeConfig 48 }
ccmeSysTrapSeverity OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
minor(2),
major(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internally-defined severity of the particular alarm
condition, associated with the most recent notification.
A subsequent event in which the alarm condition changes
from its failed state back to a 'normal' state has a
severity of 'clear'."
::= { ccmeConfig 49 }
ccmeSysNotificationReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internally-defined failure cause of the particular
alarm condition, associated with the most recent trap."
::= { ccmeConfig 50 }
ccmeEphoneUnRegThreshold OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable sets the threshold to limit the
unregistration trap notification."
::= { ccmeConfig 51 }
ccmeEphoneTrapReason OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internally-defined failure cause of the particular
alarm condition, associated with the most recent Ephone
trap."
::= { ccmeConfig 52 }
ccmeUserAutoLogoutTo OBJECT-TYPE
SYNTAX Integer32 (1..120)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of time before the users of
IP phones in a Cisco CallManager Express system are
automatically logged out."
::= { ccmeConfig 53 }
ccmeUserLoginDeactivateTime OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the specified time of day when user logins
for all IP phones are deactivated."
::= { ccmeConfig 54 }
ccmeMwiSipServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the designated IP address to an external
SIP based message-waiting indication (MWI) server.
The type of this address is determined by the
value of the ccmeSysIPAddressType object."
::= { ccmeConfig 55 }
ccmeMwiSipServerTransportType OBJECT-TYPE
SYNTAX INTEGER {
tcp(1),
udp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the transport layer protocol used to
connect external SIP-based message-waiting
indication (MWI) server.
tcp(1) - TCP as transport layer protocol.
udp(2) - UDP as transport layer protocol."
::= { ccmeConfig 56 }
ccmeMwiSipServerPortNumber OBJECT-TYPE
SYNTAX InetPortNumber (2000..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port number for the message-waiting
indication (MWI) server."
DEFVAL { 5060 }
::= { ccmeConfig 57 }
ccmeMwiSipServerRegE164Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether E.164 number is registered with
SIP proxy or Registrar rather than an extension number.
'true' indicates E.164 is registered.
'false' indicates extension number is registered."
::= { ccmeConfig 58 }
ccmeMwiSipSvrUnsolicitedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether SIP NOTIFY for MWI is sent
without a SUBSCRIBE from the Cisco CallManager Express.
'true' indicates SIP NOTIFY is sent without SIP
SUBSCRIBE.
'false' indicates solicited NOTIFY is sent."
::= { ccmeConfig 59 }
-- COR (Class of restriction) Configuration Table
ccmeCorConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeCorConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Class of Restriction (COR) configured
on this device."
::= { ccmeConfig 60 }
ccmeCorConfEntry OBJECT-TYPE
SYNTAX CcmeCorConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a Class of restriction (COR)
configured entry.
There is an entry for each COR configured on
this device. An entry is deleted if the COR is
removed from configuration."
INDEX { ccmeCorTableIndex }
::= { ccmeCorConfTable 1 }
CcmeCorConfEntry ::= SEQUENCE {
ccmeCorTableIndex Unsigned32,
ccmeCorTag Unsigned32,
ccmeCorListName SnmpAdminString,
ccmeCorScope INTEGER,
ccmeCorDirection INTEGER,
ccmeCorStartingNumber SnmpAdminString,
ccmeCorEndingNumber SnmpAdminString,
ccmeCorVoiceRegPoolNumber Unsigned32,
ccmeCorListDefaultEnabled TruthValue
}
ccmeCorTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this
CcmeCorConfEntry."
::= { ccmeCorConfEntry 1 }
ccmeCorTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the tag number.
If ccmeEnabled object is 'true' for Cisco
CallManager Express Mode then this object
indicates the ephone-dn tag under which the
COR was configured.
If csrstEnabled object is 'true' for Cisco
Survivable Remote Site Telephony (SRST) mode,
then this object indicates the COR list
identifier configured under SRST configuration
or Voice Registrar configuration."
::= { ccmeCorConfEntry 2 }
ccmeCorListName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the COR list name configured
on this device."
::= { ccmeCorConfEntry 3 }
ccmeCorScope OBJECT-TYPE
SYNTAX INTEGER {
ccme(1),
srstSccp(2),
srstSip(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the scope of this COR list for a
list of associated dial-peers.
ccme(1) - indicates this COR is applicable to
the dial-peer associated with ciscoCorTag
Ephone-DN object.
srstSccp(2) - indicates this COR is applicable to
all the dynamically created dial-peers
under SCCP SRST mode.
srstSip(3) - indicates this COR is applicable to
all the SIP SRST dial-peers that belong
to a specified voice registrar pool
indicated by ciscoCorVoiceRegPoolNumber
object."
::= { ccmeCorConfEntry 4 }
ccmeCorDirection OBJECT-TYPE
SYNTAX INTEGER {
incoming(1),
outgoing(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the COR will be used by
incoming or outgoing dial peers."
::= { ccmeCorConfEntry 5 }
ccmeCorStartingNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the starting number of
a range of directory numbers for
a COR list configured on this
device."
::= { ccmeCorConfEntry 6 }
ccmeCorEndingNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ending number of
a range of directory numbers for
a COR list configured on this
device."
::= { ccmeCorConfEntry 7 }
ccmeCorVoiceRegPoolNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the voice registrar pool
number under which this COR list is
applied."
::= { ccmeCorConfEntry 8 }
ccmeCorListDefaultEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the default COR list
is enabled or disabled for this COR entry.
'true' indicates this COR list assumes behavior
of a pre-defined default COR list.
'false' indicates default COR list is not
applied."
::= { ccmeCorConfEntry 9 }
-- Loopback DN Configuration Table
ccmeLoopbackDnConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeLoopbackDnConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of loopback DN's (lines) configured
on this device."
::= { ccmeConfig 61 }
ccmeLoopbackDnConfEntry OBJECT-TYPE
SYNTAX CcmeLoopbackDnConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a loopback DN configured
on this device.
There is an entry created for each loopback
DN configured on this device. An entry is deleted
if the loopback DN is removed from this device
configuration."
INDEX { ccmeLoopbackDnTag }
::= { ccmeLoopbackDnConfTable 1 }
CcmeLoopbackDnConfEntry ::= SEQUENCE {
ccmeLoopbackDnTag Unsigned32,
ccmeLoopbackDnforward Unsigned32,
ccmeLoopbackDnStrip Unsigned32,
ccmeLoopbackDnPrefix SnmpAdminString,
ccmeLoopbackDnSuffix SnmpAdminString,
ccmeLoopbackDnRetryTo Integer32,
ccmeLoopbackDnAutoCon TruthValue,
ccmeLoopbackDnCodec INTEGER
}
ccmeLoopbackDnTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique sequence number that identifies the
ephone-dn loopback pairs in this device."
::= { ccmeLoopbackDnConfEntry 1 }
ccmeLoopbackDnforward OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of digits in the original
called number that will be forwarded to the other
phone-dn in the loopback-dn pair."
::= { ccmeLoopbackDnConfEntry 2 }
ccmeLoopbackDnStrip OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of leading digits that will
be stripped from the original called number that
will be forwarded to the other phone-dn in the
loopback-dn pair."
::= { ccmeLoopbackDnConfEntry 3 }
ccmeLoopbackDnPrefix OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the string of digits that will be added
in the front of the forwarded called number."
::= { ccmeLoopbackDnConfEntry 4 }
ccmeLoopbackDnSuffix OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the string of digits that will be added
in the end of the forwarded called number."
::= { ccmeLoopbackDnConfEntry 5 }
ccmeLoopbackDnRetryTo OBJECT-TYPE
SYNTAX Integer32 (0..32767)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of seconds to wait before
retrying the loopback target when it is busy
or unavailable.
A zero-value indicates that retry is disabled and
appropriate call-progress tones are passed to the
call originator."
::= { ccmeLoopbackDnConfEntry 6 }
ccmeLoopbackDnAutoCon OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the automatic connection
capability for the call during far-end alert.
'true' indicates call is immediately connected and
in-band alerting is provided while waiting
for the far-end destination to answer.
'false' indicates automatic connection is disabled."
::= { ccmeLoopbackDnConfEntry 7 }
ccmeLoopbackDnCodec OBJECT-TYPE
SYNTAX INTEGER {
g711alaw(1),
g711ulaw(2),
default(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The codec type applied to the calls that pass through
the loopback-dn.
g711alaw(1) - indicates the G.711 a-law is applied.
g711ulaw(2) - indicates the G.711 mu-law is applied.
Option 1 and 2 overrides the G.711 codec
type that is negotiated for the call and
provides mu-law to a-law conversion
if needed.
default(3) - indicates the Real-Time Transport Protocol
(RTP) voice packets are passed through the
loopback-dn without considering the G.711
coding type negotiated for the calls."
::= { ccmeLoopbackDnConfEntry 8 }
-- Intercom DN Configuration Table
ccmeIntercomDnConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeIntercomDnConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of intercom DN's (lines) configured
on this device."
::= { ccmeConfig 62 }
ccmeIntercomDnConfEntry OBJECT-TYPE
SYNTAX CcmeIntercomDnConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a intercom DN configured
on this device.
There is an entry created for each intercom
DN configured on this device. An entry is deleted
if the intercom DN is removed from this device
configuration."
INDEX { ccmeIntercomDnTag }
::= { ccmeIntercomDnConfTable 1 }
CcmeIntercomDnConfEntry ::= SEQUENCE {
ccmeIntercomDnTag Unsigned32,
ccmeIntercomDnExtensionNum SnmpAdminString,
ccmeIntercomDnBargeInEnabled TruthValue,
ccmeIntercomDnAutoAnsEnabled TruthValue,
ccmeIntercomDnLabel SnmpAdminString
}
ccmeIntercomDnTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates Ephone-DN (line) tag number under
which this Intercom was configured."
::= { ccmeIntercomDnConfEntry 1 }
ccmeIntercomDnExtensionNum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the telephone number to which intercom
calls are placed."
::= { ccmeIntercomDnConfEntry 2 }
ccmeIntercomDnBargeInEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the inbound intercom calls
behavior when existing call is active.
'true' indicates inbound intercom calls force the
existing call into call-hold state and allows the
intercom call to be answered immediately.
'false' indicates inbound intercom calls don't
barge-in the existing calls."
::= { ccmeIntercomDnConfEntry 3 }
ccmeIntercomDnAutoAnsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the auto-answer feature is
applied to this EPhone-DN.
'true' indicates auto-answer feature is enabled.
'false' indicates auto-answer feature is disabled.
This indicates the Ephone-DN a connection that
resembles a private line, automatic ringdown
(PLAR)."
::= { ccmeIntercomDnConfEntry 4 }
ccmeIntercomDnLabel OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the label for the intercom configured
on this device."
::= { ccmeIntercomDnConfEntry 5 }
ccmeMohMulticastIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address type of ccmeMohMulticastIpAddress.
Only IPv4 and IPv6 addresses are expected."
::= { ccmeConfig 67 }
ccmeMohMulticastIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the destination IP address
for multicast of the Music-on-hold audio stream.
The type of this address is determined by the
value of the ccmeSysIPAddressType object."
::= { ccmeConfig 63 }
ccmeMohMulticastPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the media port for multicast
of the Music-oh-hold audio stream."
::= { ccmeConfig 64 }
ccmeMohMulticastRoute OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates a string of IP addresses, each separate
by other by a space, over which Music-oh-hold IP
multicast packets are transmitted."
::= { ccmeConfig 65 }
-- **************************************************************
-- CCME, Ephone and EphoneDN Active status group
-- **************************************************************
ccmeEphoneCallLegs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the active number of call legs
contributed from the Cisco IP Phones and TAPI
clients interacting with this device at this
instance."
::= { ccmeActiveStats 1 }
ccmeEphoneTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Cisco IP phones
(Ephones) seen by this device since the last reset."
::= { ccmeActiveStats 2 }
ccmeEphoneTotRegistered OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Cisco IP phones
currently registered to this device."
::= { ccmeActiveStats 3 }
ccmeEphoneTotKeyPhConfigured OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of configured Cisco
IP phones that are marked as Key phones on this
device."
::= { ccmeActiveStats 4 }
ccmeEphoneTotKeyPhRegistered OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Key Cisco IP phones
currently registered to this device."
::= { ccmeActiveStats 5 }
-- Active Ephone Table
--
-- This table indicates active information about each
-- IP phone seen by the device.
ccmeEphoneActTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all IP phones currently registered
on this device."
::= { ccmeActiveStats 6 }
ccmeEphoneActEntry OBJECT-TYPE
SYNTAX CcmeEphoneActEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP phone seen by this device.
There is an entry added for each new IP phone
registration in this table. Entry is removed
once the phone is deceased or re-registered."
INDEX { ccmeEphoneTag }
::= { ccmeEphoneActTable 1 }
CcmeEphoneActEntry ::= SEQUENCE {
ccmeEphoneDeviceName SnmpAdminString,
ccmeEphoneRegState INTEGER,
ccmeEphoneActiveDN Integer32,
ccmeEphoneActivityStatus INTEGER,
ccmeEphoneKeepAliveCnt Counter32,
ccmeEphonePendingReset TruthValue,
ccmeEphoneRegTime SnmpAdminString,
ccmeEphoneCurrentFirmwareRev SnmpAdminString,
ccmeEphonePreviousFirmwareRev SnmpAdminString,
ccmeEphoneLastError SnmpAdminString,
ccmeEphoneObservedType SnmpAdminString,
ccmeEphoneLoginStatus TruthValue,
ccmeEphoneDnDStatus TruthValue,
ccmeEphoneDebugStatus TruthValue,
ccmeEphoneMediaActive TruthValue,
ccmeEphoneTAPIClient TruthValue,
ccmeEphoneMediaCapability INTEGER,
ccmeEphoneRemote TruthValue
}
ccmeEphoneDeviceName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type and model of Cisco IP phone as seen in the
registration on this device."
::= { ccmeEphoneActEntry 1 }
ccmeEphoneRegState OBJECT-TYPE
SYNTAX INTEGER {
registered(1),
unregistered(2),
deceased(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The registration state of the Cisco IP phone.
registered(1) - indicates the phone is active.
unregistered(2) - indicates the connection to Cisco
IP phone was closed in normal manner.
deceased(3) - indicates the connection to the Cisco
IP phone was closed because of a
keep-alive timeout."
::= { ccmeEphoneActEntry 2 }
ccmeEphoneActiveDN OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active DN (line) on the IP phone."
::= { ccmeEphoneActEntry 3 }
ccmeEphoneActivityStatus OBJECT-TYPE
SYNTAX INTEGER {
onhook(1),
offhook(2),
ringing(3),
paging(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the Cisco IP phone as seen
on this device.
onhook(1) - Phone is on-hook.
offhook(2) - Phone is off-hook.
ringing(3) - Phone is ringing.
paging(4) - Phone is receiving an audio page."
::= { ccmeEphoneActEntry 4 }
ccmeEphoneKeepAliveCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of keepalive messages received from
the Cisco IP phone by this device since
the phone registered."
::= { ccmeEphoneActEntry 5 }
ccmeEphonePendingReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pending reset operation on this IP phone as seen
by this device. True indicating reset is pending."
::= { ccmeEphoneActEntry 6 }
ccmeEphoneRegTime OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time this phone registered to this device."
::= { ccmeEphoneActEntry 7 }
ccmeEphoneCurrentFirmwareRev OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current vendor-specific firmware version
string provided by the Cisco IP phone during
registration on this device."
::= { ccmeEphoneActEntry 8 }
ccmeEphonePreviousFirmwareRev OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous vendor-specific firmware version
of Cisco IP phone provided by the Cisco IP phone
during registration on this device."
::= { ccmeEphoneActEntry 9 }
ccmeEphoneLastError OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason for last reset of the phone as seen
by this device. Reason for last reset of phone
could be 'TCP-timeout' or 'CallManager-closed-TCP'
or 'Initialized'."
::= { ccmeEphoneActEntry 10 }
ccmeEphoneObservedType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type and model of Cisco IP phone received
by this device during the registration of IP phone."
::= { ccmeEphoneActEntry 11 }
ccmeEphoneLoginStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that a phone user is currently
logged in on this phone. False indicates no phone
user currently logged in on this phone."
::= { ccmeEphoneActEntry 12 }
ccmeEphoneDnDStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that phone is set do-not-disturb (DnD)
on one or more of the phone's extensions used by
the Cisco IP phone. False indicates no DnD is set."
::= { ccmeEphoneActEntry 13 }
ccmeEphoneDebugStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that phone is set in debug mode.
False indicates no debug is disabled on this IP phone."
::= { ccmeEphoneActEntry 14 }
ccmeEphoneMediaActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that phone is in active conversation.
False indicates no conversation is ongoing."
::= { ccmeEphoneActEntry 15 }
ccmeEphoneTAPIClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that phone is a TAPI client.
False indicates the phone is not TAPI client."
::= { ccmeEphoneActEntry 16 }
ccmeEphoneMediaCapability OBJECT-TYPE
SYNTAX INTEGER {
audioOnly(1),
audioVideo(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the registered IP phone is
capable of supporting audio or video.
audioOnly(1) - IP phone is only audio capable.
audioVideo(2) - IP phone is audio and video capable."
::= { ccmeEphoneActEntry 17 }
ccmeEphoneRemote OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True indicates that phone is suspected not to
be on the local area network(LAN). This is derived
from the ARP entry not seen on this device.
False indicates the phone is in the same LAN as
device."
::= { ccmeEphoneActEntry 18 }
ccmeMohSource OBJECT-TYPE
SYNTAX INTEGER {
flash(1),
liveFeed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cisco CallManager Express system can derive
music-on-hold (MOH) from two locations.
If flash (1) is displayed, the router is currently
picking MOH stream from an audio file configured
in flash file system. The location of the file is
provided by ccmeMohFlashFile object.
If liveFeed (2) is displayed, the router is
currently picking MOH stream from an incoming call
audio stream. Normally, a single ephone-dn would
be configured to accept liveFeed call.
ccmeEphoneDnType with moh type will specify this DN."
::= { ccmeActiveStats 7 }
ccmeNightServiceEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current Night service state.
'true' means that Night service is active.
'false' means that Night service is inactive."
::= { ccmeActiveStats 8 }
-- *****************************************************************
-- CCME, Ephone and EphoneDN History group
-- *****************************************************************
ccmeEphoneDnChStatsHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmeEphoneDnChStatsHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for all Ephone-DN's (lines)
on this device."
::= { ccmeHistoryStats 1 }
ccmeEphoneDnChStatsHistoryEntry OBJECT-TYPE
SYNTAX CcmeEphoneDnChStatsHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistical information about an Ephone-DN.
There is an entry added for each new Ephone-DN
configured in this table. Entry is removed
once the Ephone-DN is removed from this device
configuration."
INDEX {
ccmeEphoneDnTag,
ccmeEphoneDnChNum
}
::= { ccmeEphoneDnChStatsHistoryTable 1 }
CcmeEphoneDnChStatsHistoryEntry ::= SEQUENCE {
ccmeEphoneDnChNum Integer32,
ccmeEphoneDnChIncoming Counter32,
ccmeEphoneDnChInAnswered Counter32,
ccmeEphoneDnChOutbound Counter32,
ccmeEphoneDnChOutAnswered Counter32,
ccmeEphoneDnChOutBusy Counter32,
ccmeEphoneDnChDiscAtConn Counter32,
ccmeEphoneDnChDiscAtAlert Counter32,
ccmeEphoneDnChDiscAtHold Counter32,
ccmeEphoneDnChDiscAtRing Counter32,
ccmeEphoneDnChDiscCauseNearEnd Integer32,
ccmeEphoneDnChDiscCauseFarEnd Integer32
}
ccmeEphoneDnChNum OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ephone-DN (line) channel number for this entry."
::= { ccmeEphoneDnChStatsHistoryEntry 1 }
ccmeEphoneDnChIncoming OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming calls received by
this Ephone-DN (line) channel."
::= { ccmeEphoneDnChStatsHistoryEntry 2 }
ccmeEphoneDnChInAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming calls answered by this
Ephone-DN (line) channel."
::= { ccmeEphoneDnChStatsHistoryEntry 3 }
ccmeEphoneDnChOutbound OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls placed by this
Ephone-DN (line) channel."
::= { ccmeEphoneDnChStatsHistoryEntry 4 }
ccmeEphoneDnChOutAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were placed and
answered by this Ephone-DN (line) channel."
::= { ccmeEphoneDnChStatsHistoryEntry 5 }
ccmeEphoneDnChOutBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were placed from
this channel and were not answered because
of busy line."
::= { ccmeEphoneDnChStatsHistoryEntry 6 }
ccmeEphoneDnChDiscAtConn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were placed from
this channel and were disconnected during
call setup."
::= { ccmeEphoneDnChStatsHistoryEntry 7 }
ccmeEphoneDnChDiscAtAlert OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were placed from
this channel and were disconnected during
call alerting stage."
::= { ccmeEphoneDnChStatsHistoryEntry 8 }
ccmeEphoneDnChDiscAtHold OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were placed from
this channel and were disconnected during
call was put on hold."
::= { ccmeEphoneDnChStatsHistoryEntry 9 }
ccmeEphoneDnChDiscAtRing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of calls that were received on
this channel and were disconnected during
alerting state."
::= { ccmeEphoneDnChStatsHistoryEntry 10 }
ccmeEphoneDnChDiscCauseNearEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last near end disconnect cause code
seen by this channel."
::= { ccmeEphoneDnChStatsHistoryEntry 11 }
ccmeEphoneDnChDiscCauseFarEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last far end disconnect cause code
seen by this channel."
::= { ccmeEphoneDnChStatsHistoryEntry 12 }
-- *****************************************************************
-- Notifications
-- *****************************************************************
ccmeMIBNotifications OBJECT IDENTIFIER
::= { ciscoCcmeMIBNotifs 0 }
ccmeStatusChangeNotif NOTIFICATION-TYPE
OBJECTS {
ccmeSysTrapSeverity,
ccmeEnabled,
ccmeSysNotificationReason
}
STATUS current
DESCRIPTION
"A ccmeStatusChangeNotif is generated if there is a change
in ccmeEnabled. This notification is generated only when
value of the 'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 1 }
ccmeEphoneUnRegThresholdExceed NOTIFICATION-TYPE
OBJECTS { ccmeEphoneUnRegThreshold }
STATUS current
DESCRIPTION
"This notification is generated every time the total
number of Ephones registered is exceeded and then dropped
below threshold specified by 'ccmeEphoneUnRegThreshold'
object. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 2 }
ccmeEPhoneDeceased NOTIFICATION-TYPE
OBJECTS {
ccmeEphoneIpAddress,
ccmeEphoneRegState
}
STATUS current
DESCRIPTION
"This notification is generated every time registered Ephone
changes state to 'Deceased', indicating that the connection
to the Cisco IP phone was closed because of a keepalive
timeout. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 3 }
ccmeEPhoneRegFailed NOTIFICATION-TYPE
OBJECTS {
ccmeEphoneIpAddress,
ccmeEphoneTrapReason
}
STATUS current
DESCRIPTION
"This notification is generated every time an Ephone
attempts to register but fails. This notification is
only for those failures seen by the CCME or SRST
gateway. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 4 }
ccmeEphoneLoginFailed NOTIFICATION-TYPE
OBJECTS {
ccmeEphoneIpAddress,
ccmeEphoneTrapReason
}
STATUS current
DESCRIPTION
"This notification is generated every time an Ephone user
login is rejected/failed.
This objects is generated only if 'ccmeNotificationEnable'
object is 'true'."
::= { ccmeMIBNotifications 5 }
ccmeNightServiceChangeNotif NOTIFICATION-TYPE
OBJECTS { ccmeEphoneTrapReason }
STATUS current
DESCRIPTION
"A ccmeNightServiceChangeNotif notification is generated
if there is change in night service status on this
device. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 6 }
ccmeLivefeedMohFailedNotif NOTIFICATION-TYPE
OBJECTS { ccmeEphoneTrapReason }
STATUS current
DESCRIPTION
"A ccmeLivefeedMohFailedNotif notification is generated
when the Music-on-hold (Moh) live feed has failed. This
objects is generated only if 'ccmeNotificationEnable'
object is 'true'."
::= { ccmeMIBNotifications 7 }
ccmeMaxConferenceNotif NOTIFICATION-TYPE
OBJECTS { ccmeEphoneTrapReason }
STATUS current
DESCRIPTION
"A ccmeMaxConferenceNotif notification is generated
if the maximum number of simultaneous three-party
conferences supported by the Cisco CallManager
Express is exceeded. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 8 }
ccmeKeyEphoneRegChangeNotif NOTIFICATION-TYPE
OBJECTS {
ccmeEphoneIpAddress,
ccmeEphoneRegState
}
STATUS current
DESCRIPTION
"A ccmeKeyEphoneRegChangeNotif notification is generated
if there is a change in the registration status of Key
IP phone. This objects is generated only if
'ccmeNotificationEnable' object is 'true'."
::= { ccmeMIBNotifications 9 }
-- *****************************************************************
-- Conformance
-- *****************************************************************
ciscoCcmeMIBCompliances OBJECT IDENTIFIER
::= { ciscoCcmeMIBConform 1 }
ciscoCcmeMIBGroups OBJECT IDENTIFIER
::= { ciscoCcmeMIBConform 2 }
ciscoCcmeMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the Cisco CallManager Express
MIB."
MODULE -- this module
MANDATORY-GROUPS {
ccmeConfigGroup,
ccmeActiveStatsGroup,
ccmeHistoryStatsGroup,
ccmeNotifGroup
}
::= { ciscoCcmeMIBCompliances 1 }
ciscoCcmeMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco CallManager Express
MIB."
MODULE -- this module
MANDATORY-GROUPS {
ccmeActiveStatsGroup,
ccmeHistoryStatsGroup,
ccmeNotifGroup,
ccmeConfigGroup,
ccmeConfigGroup1
}
::= { ciscoCcmeMIBCompliances 2 }
-- Units of Conformance
ccmeConfigGroup OBJECT-GROUP
OBJECTS {
ccmeEnabled,
ccmeVersion,
ccmeIPAddressType,
ccmeIPAddress,
ccmePortNumber,
ccmeMaxEphones,
ccmeMaxDirectoryNumber,
ccmeMaxConferences,
ccmeMaxRedirect,
ccmeScriptName,
ccmeVoiceMailNumber,
ccmeMwiRelay,
ccmeMwiExpires,
ccmeTransferSystem,
ccmeTimeFormat,
ccmeDateFormat,
ccmeUrlforServicesBtn,
ccmeUrlforDirectoriesBtn,
ccmeMohFlashFile,
ccmeMohMulticastFromFlashEnabled,
ccmeMohFlashMulticastIPAddrType,
ccmeMohFlashMulticastIPAddr,
ccmeMohFlashMulticastPortNum,
ccmePhoneType,
ccmePhoneFirmwareRev,
ccmeTransferPattern,
ccmeTransferPatternType,
ccmeWebGUIEditEnabled,
ccmeWebGUITimeEnabled,
ccmeAfterHrsBlockPattern,
ccmeAfterHrsBlockPatternAllTime,
ccmeAfterHrsBlockDateMonth,
ccmeAfterHrsBlockDate,
ccmeAfterHrsBlockDateStartHour,
ccmeAfterHrsBlockDateStartMin,
ccmeAfterHrsBlockDateStopHour,
ccmeAfterHrsBlockDateStopMin,
ccmeAfterHrsBlockDay,
ccmeAfterHrsBlockDayStartHour,
ccmeAfterHrsBlockDayStartMin,
ccmeAfterHrsBlockDayStopHour,
ccmeAfterHrsBlockDayStopMin,
ccmeNightServiceCode,
ccmeNightServiceDateMonth,
ccmeNightServiceDate,
ccmeNightServiceDateStartHour,
ccmeNightServiceDateStartMin,
ccmeNightServiceDateStopHour,
ccmeNightServiceDateStopMin,
ccmeNightServiceDay,
ccmeNightServiceDayStartHour,
ccmeNightServiceDayStartMin,
ccmeNightServiceDayStopHour,
ccmeNightServiceDayStopMin,
ccmeFXOHookFlashEnabled,
ccmeSecondaryDialTonePrefix,
ccmeWebAdminSystemUser,
ccmeWebAdminCustomerUser,
ccmeSystemMessage,
ccmeDialplanPatternTag,
ccmeDialplanPattern,
ccmeDialplanExtLength,
ccmeDialplanExtPattern,
ccmeDialplanAllowRegiEnabled,
ccmeKeepAliveTimeout,
ccmeInterDigitTimeout,
ccmeBusyTimeout,
ccmeAlertTimeout,
ccmeEphoneIpAddressType,
ccmeEphoneIpAddress,
ccmeEphoneMacAddress,
ccmeEphoneModel,
ccmeEphoneDnType,
ccmeEphoneDnMode,
ccmeEphoneDnPriNum,
ccmeEphoneDnSecNum,
ccmeEphoneDnName,
ccmeEphoneDnLabel,
ccmeEphoneDnPriPref,
ccmeEphoneDnSecPref,
ccmeEphoneDnCFBusyNum,
ccmeEphoneDnCFAllNum,
ccmeEphoneDnCFNoAnNum,
ccmeEphoneDnCFNoAnTo,
ccmeEphoneDnMwiCapability,
ccmeEphoneDnHuntstop,
ccmeEphoneDnHuntstopCh,
ccmeEphoneDnHoldAltTo,
ccmeEphoneDnHoldAltType,
ccmeEphoneDnMwiSipSubscrEnabled,
ccmeEphoneDnScriptName,
ccmeEphoneUsername,
ccmeNotificationEnable,
ccmeSysTrapSeverity,
ccmeSysNotificationReason,
ccmeEphoneUnRegThreshold,
ccmeEphoneKeyPhone,
ccmeEphoneKeepAlive,
ccmeEphoneAutoLineInEnabled,
ccmeEphoneAutoLineOut,
ccmeEphonePagingDn,
ccmeEphonePagingPolicy,
ccmeEphoneTemplate,
ccmeEphoneAftHrsBlkExmptEnabled,
ccmeEphoneNightBellSvcEnabled,
ccmeEphoneAddon,
ccmeEphoneKeepConfEnabled,
ccmeEphoneTrapReason,
ccmeUserAutoLogoutTo,
ccmeUserLoginDeactivateTime,
ccmeMwiSipServerIpAddress,
ccmeMwiSipServerTransportType,
ccmeMwiSipServerPortNumber,
ccmeMwiSipServerRegE164Enabled,
ccmeMwiSipSvrUnsolicitedEnabled,
ccmeCorTag,
ccmeCorListName,
ccmeCorScope,
ccmeCorDirection,
ccmeCorStartingNumber,
ccmeCorEndingNumber,
ccmeCorVoiceRegPoolNumber,
ccmeCorListDefaultEnabled,
ccmeLoopbackDnforward,
ccmeLoopbackDnStrip,
ccmeLoopbackDnPrefix,
ccmeLoopbackDnSuffix,
ccmeLoopbackDnRetryTo,
ccmeLoopbackDnAutoCon,
ccmeLoopbackDnCodec,
ccmeIntercomDnExtensionNum,
ccmeIntercomDnBargeInEnabled,
ccmeIntercomDnAutoAnsEnabled,
ccmeIntercomDnLabel,
ccmeEphoneSpeedDialTag,
ccmeEphoneSpeedDialNumber,
ccmeEphoneSpeedDialLabel,
ccmeEphoneFastDialNumber,
ccmeEphoneFastDialName,
ccmeEphoneOverlayDN,
ccmeMohMulticastIpAddressType,
ccmeMohMulticastIpAddress,
ccmeMohMulticastPortNumber,
ccmeMohMulticastRoute
}
STATUS current
DESCRIPTION
"A collection of objects which are used to show the
configuration of Cisco CallManager Express feature."
::= { ciscoCcmeMIBGroups 1 }
ccmeActiveStatsGroup OBJECT-GROUP
OBJECTS {
ccmeEphoneCallLegs,
ccmeEphoneTot,
ccmeEphoneTotRegistered,
ccmeEphoneTotKeyPhConfigured,
ccmeEphoneTotKeyPhRegistered,
ccmeEphoneDeviceName,
ccmeEphoneRegState,
ccmeEphoneActiveDN,
ccmeEphoneActivityStatus,
ccmeEphoneKeepAliveCnt,
ccmeEphonePendingReset,
ccmeEphoneRegTime,
ccmeEphoneCurrentFirmwareRev,
ccmeEphonePreviousFirmwareRev,
ccmeEphoneLastError,
ccmeEphoneObservedType,
ccmeEphoneLoginStatus,
ccmeEphoneDnDStatus,
ccmeEphoneDebugStatus,
ccmeEphoneMediaActive,
ccmeEphoneTAPIClient,
ccmeEphoneMediaCapability,
ccmeEphoneRemote,
ccmeMohSource,
ccmeNightServiceEnabled
}
STATUS current
DESCRIPTION
"A collection of objects that show the
active status of Cisco CallManager Express, Ephone
and EphoneDN."
::= { ciscoCcmeMIBGroups 2 }
ccmeHistoryStatsGroup OBJECT-GROUP
OBJECTS {
ccmeEphoneDnChIncoming,
ccmeEphoneDnChInAnswered,
ccmeEphoneDnChOutbound,
ccmeEphoneDnChOutAnswered,
ccmeEphoneDnChOutBusy,
ccmeEphoneDnChDiscAtConn,
ccmeEphoneDnChDiscAtAlert,
ccmeEphoneDnChDiscAtHold,
ccmeEphoneDnChDiscAtRing,
ccmeEphoneDnChDiscCauseNearEnd,
ccmeEphoneDnChDiscCauseFarEnd
}
STATUS current
DESCRIPTION
"Selects the group of objects that display the
history status of EphoneDN."
::= { ciscoCcmeMIBGroups 3 }
ccmeNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ccmeStatusChangeNotif,
ccmeEphoneUnRegThresholdExceed,
ccmeEPhoneDeceased,
ccmeEPhoneRegFailed,
ccmeEphoneLoginFailed,
ccmeNightServiceChangeNotif,
ccmeLivefeedMohFailedNotif,
ccmeMaxConferenceNotif,
ccmeKeyEphoneRegChangeNotif
}
STATUS current
DESCRIPTION
"A collection of notifications for the Cisco
CallManager Express features."
::= { ciscoCcmeMIBGroups 4 }
ccmeConfigGroup1 OBJECT-GROUP
OBJECTS { ccmeEphonePrimaryDn }
STATUS current
DESCRIPTION
"A collection of object which indicates the primary
extension DN of an IP phone."
::= { ciscoCcmeMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink