MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-CALL-TRACKER-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1770 lines
57 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-CALL-TRACKER-MIB.my: Call Progress and Status Tracking MIB
--
-- March 2000, Ed Richardson
--
-- Copyright (c) 2000, 2004 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-CALL-TRACKER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
IpAddress,
Gauge32,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString,
TimeStamp,
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
AbsoluteCounter32
FROM DIAL-CONTROL-MIB;
ciscoCallTrackerMIB MODULE-IDENTITY
LAST-UPDATED "200504120000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-dial@cisco.com"
DESCRIPTION
"This MIB module provides information for tracking the
progress and status of a data call from the hardware
layer through the application or service layer.
A data call is a call setup via a signaling
protocol (e.g., ISDN D Channel signaling) on the
Public Switching Telephony Network to a
Network Access Server in order to transfer data,
either as a byte stream (e.g., terminal emulation)
or in a packet format (e.g., PPP packets) from a
data terminal (e.g., Personal Computer) to a
data network (e.g., Internet).
"
REVISION "200504120000Z"
DESCRIPTION
"[1] CctCallCategory - added syncData
[2] CctCallCategory - added lapb-ta
[3] Added new textual convention CctCallSigType
[4] Added cctActiveCallSignalingType to cctActiveTable
[5] Added cctHistoryCallSignalingType to
cctHistoryTable
"
REVISION "200402020000Z"
DESCRIPTION
"Included mgcpData in CctCallCategory."
REVISION "200002100000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoMgmt 163 }
--
-- Textual Conventions
--
--
-- Call Identifier textual convention
--
CctCallId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Call Identifier.
The call identifier is a monotonically assigned, positive
integer which uniquely identifies the call within the
system.
"
SYNTAX Unsigned32 (1..4294967295)
--
-- Call Service Type textual convention
--
CctServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents possible service types.
none - No service associated with call.
other - Service active, but none of the following.
slip - Serial Line IP
ppp - PPP
mp - Multilink PPP (RFC 1990)
tcpClear - Byte stream over TCP
telnet - TELNET
exec - terminal server
l2f - Virtual Private Data Network service (VPDN)
using Layer 2 Forwarding protocol
l2tp - Virtual Private Data Network service (VPDN)
using Layer 2 Tunneling Protocol
"
SYNTAX INTEGER {
none (1),
other (2),
slip (3),
ppp (4),
mp (5),
tcpClear (6),
telnet (7),
exec (8),
l2f (9),
l2tp (10)
}
--
-- Call Category textual convention
--
CctCallCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents possible call categories or types.
none - No call category associated with call
other - None of the following
modem - Modem call
isdn-sync - ISDN sync digital call
Now mapped to syncData
v110 - V110 Call
v120 - V120 Call
cas-digital - Channel Associated Signaling
(CAS) 56k data call
mgcpData - MGCP data call
Now mapped to syncData
syncData - Sync digital data call for any
call control
lapb-ta - LAPB or LAPB-TA call
"
SYNTAX INTEGER {
none (1),
other (2),
modem (3),
isdnSync (4),
v110 (5),
v120 (6),
casDigital (7),
mgcpData (8),
syncData (9),
lapb-ta (10)
}
--
-- Call Signaling Type textual convention
--
CctCallSigType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents supported signaling types for a call.
Unknown - Signaling origin of call type unknown.
External - Signaling origin of call type by external
agent e.g. MGCP, H.248
Q931 - Signaling origin of call type by Q.931/ISDN
Autodetect - Signaling of call type by automatic detection
"
SYNTAX INTEGER {
unknown (1),
external (2),
q931 (3),
autoDetect (4)
}
-- Call Tracker MIB objects definitions
cctMIBObjects OBJECT IDENTIFIER ::= { ciscoCallTrackerMIB 1 }
-- The Call Tracker MIB consists of the following groups
-- [1] Call Tracker General Group (cctGeneral)
-- [2] Call Tracker Active Group (cctActive)
-- [3] Call Tracker History Group (cctHistory)
-- [4] Call Tracker Notification Configuration Group
-- (cctNotificationConfig)
cctGeneral OBJECT IDENTIFIER ::= { cctMIBObjects 1 }
cctActive OBJECT IDENTIFIER ::= { cctMIBObjects 2 }
cctHistory OBJECT IDENTIFIER ::= { cctMIBObjects 3 }
cctNotificationConfig OBJECT IDENTIFIER ::= { cctMIBObjects 4 }
-- *****************************************************************
-- Call Tracker General Group
-- *****************************************************************
cctCallIdPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object may be used in conjunction with objects of
type CctCallId to provide call references which are
unique across system re-initializations.
This value is generated at system re-initialization.
It is a 32-bit random number, with very low likely-hood
of repeating within the lifetime of the system.
"
::= { cctGeneral 1 }
-- *****************************************************************
-- Call Tracker Active Group
-- *****************************************************************
--
--
-- Active Table statistics
cctActiveTableNumberEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries currently in the
cctActiveTable.
"
::= { cctActive 1 }
cctActiveTableHighWaterMark OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of entries present in cctActiveTable
since last system re-initialization.
This corresponds to the maximum value reported by
cctActiveTableNumberEntries.
"
::= { cctActive 2 }
--
-- Call Active Table
--
cctActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CctActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for active calls in the
system. All such calls either originate or terminate
at this system.
The table is indexed by call ID assigned to the call.
"
::= { cctActive 3 }
cctActiveEntry OBJECT-TYPE
SYNTAX CctActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single call.
Entries are created when a setup request is first
received by the system.
Entries are removed when a call is terminated or
rejected. A corresponding entry is created in the
cctHistoryTable.
"
INDEX { cctActiveCallId }
::= { cctActiveTable 1 }
CctActiveEntry ::=
SEQUENCE {
cctActiveCallId CctCallId,
cctActiveSetupTime TimeStamp,
cctActiveOrigin INTEGER,
cctActiveConnectionTime TimeStamp,
cctActivePhysicalLayerReadyTime TimeStamp,
cctActiveServiceUpTime TimeStamp,
cctActiveServiceType CctServiceType,
cctActiveUserValidationTime TimeStamp,
cctActiveUserId DisplayString,
cctActiveUserIpAddr IpAddress,
cctActiveUserSubnetMask IpAddress,
cctActiveAccountingSessionId DisplayString,
cctActiveCallCategory CctCallCategory,
cctActiveInitialRxRate Unsigned32,
cctActiveInitialTxRate Unsigned32,
cctActiveResourceSlot Integer32,
cctActiveResourcePort Integer32,
cctActiveEntrySlot Integer32,
cctActiveEntryPort Integer32,
cctActiveEntryDs1 Integer32,
cctActiveEntryChannel Integer32,
cctActiveCalledPartyId DisplayString,
cctActiveCallingPartyId DisplayString,
cctActiveMpBundleId Unsigned32,
cctActiveChargedUnits AbsoluteCounter32,
cctActiveReceiveBytes AbsoluteCounter32,
cctActiveTransmitBytes AbsoluteCounter32,
cctActiveCallSignalingType CctCallSigType
}
cctActiveCallId OBJECT-TYPE
SYNTAX CctCallId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a Call Identifier.
The call identifier is a monotonically increasing
unsigned integer which uniquely identifies the call
within the system.
The Call ID is represented as an unsigned 32-bit
integer. After 4,294,967,295 calls, the ID will wrap
and the 4,294,967,296th call will receive the next
smallest available id starting from 1.
Zero is not a valid value.
"
::= { cctActiveEntry 1 }
cctActiveSetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the call is first made known to
the system.
"
::= { cctActiveEntry 2 }
cctActiveOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the call was created.
originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout
answer(2) - The call was initiated remotely and
the system received the setup request.
Dialin
"
::= { cctActiveEntry 3 }
cctActiveConnectionTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the system connected the call.
"
::= { cctActiveEntry 4 }
cctActivePhysicalLayerReadyTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.
In the case of modem calls, the physical layer for the
call achieves a steady state when the data rates,
modulations, and error correcting protocols have been
negotiated between the originating and answering modems.
This is primarily intended for calls which connect to a
processing resource identified by cctActiveResourceSlot
and cctActiveResourcePort.
It also applies to digital calls using adaptive rate
technologies such as V.110 and V.120.
"
::= { cctActiveEntry 5 }
cctActiveServiceUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the call service type identified
in cctActiveServiceType was established.
"
::= { cctActiveEntry 6 }
cctActiveServiceType OBJECT-TYPE
SYNTAX CctServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
"
::= { cctActiveEntry 7 }
cctActiveUserValidationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the user identification
associated with this call was validated.
See cctActiveUserId for description of user
identification.
"
::= { cctActiveEntry 8 }
cctActiveUserId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User login ID or zero length string if unavailable.
"
::= { cctActiveEntry 9 }
cctActiveUserIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.
"
::= { cctActiveEntry 10 }
cctActiveUserSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.
"
::= { cctActiveEntry 11 }
cctActiveAccountingSessionId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accounting session identification assigned to this call
by AAA.
The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.
If no accounting session ID is assigned, the value is a
null string.
"
REFERENCE
"RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft
"
::= { cctActiveEntry 12 }
cctActiveCallCategory OBJECT-TYPE
SYNTAX CctCallCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call category or type
"
::= { cctActiveEntry 13 }
cctActiveInitialRxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Initial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero until an initial data rate has
been determined.
"
::= { cctActiveEntry 14 }
cctActiveInitialTxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Initial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero until an initial data rate has
been determined.
"
::= { cctActiveEntry 15 }
cctActiveResourceSlot OBJECT-TYPE
SYNTAX Integer32 (-1..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctActiveResourcePort uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.
"
::= { cctActiveEntry 16 }
cctActiveResourcePort OBJECT-TYPE
SYNTAX Integer32 (-1..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctActiveResourceSlot uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.
"
::= { cctActiveEntry 17 }
cctActiveEntrySlot OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device slot containing the port on which the call
exists.
"
::= { cctActiveEntry 18 }
cctActiveEntryPort OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port within the device slot on which the
call exists.
"
::= { cctActiveEntry 19 }
cctActiveEntryDs1 OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.
If the physical port is of type DS1, this value is
identical to cctActiveEntryPort.
If the DS1 is a logical subinterface within the
physical port, this value is the number of the DS1
within this slot.
Examples:
8 port DS1 card - cctActiveEntryPort and
cctActiveEntryDs1 will have
identical values.
3 port T3 card - cctActiveEntryPort represents
T3 ports.
cctActiveEntryEntryDs1 represents
logical T1 interfaces.
Each T3 contains 28 T1 interfaces.
The T1 interfaces are numbered
sequentially across the entire
T3 card.
"
::= { cctActiveEntry 20 }
cctActiveEntryChannel OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel or timeslot within the cctActiveEntryDs1
allocated to the call.
"
::= { cctActiveEntry 21 }
cctActiveCalledPartyId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).
For calls originated by the system, this is the
destination number.
If not available this is a zero-length string.
"
::= { cctActiveEntry 22 }
cctActiveCallingPartyId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).
For calls originated by the system, this is the
number associated with the device.
For the interworking call, this object contains the
translated calling party number if there is a
translation rule is associated with dial plan for making
this outgoing call.
If not available this is a zero-length string.
"
::= { cctActiveEntry 23 }
cctActiveMpBundleId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multilink PPP bundle identification for call if
cctActiveServiceType has the value 'mp'.
If the value of cctActiveServiceType for this call is
not 'mp', then the value of this object is not
meaningful.
"
::= { cctActiveEntry 24 }
cctActiveChargedUnits OBJECT-TYPE
SYNTAX AbsoluteCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.
"
REFERENCE
"AOC-D defined in ETSI Standard: ETS 300 179
"
::= { cctActiveEntry 25 }
cctActiveReceiveBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.
"
::= { cctActiveEntry 26 }
cctActiveTransmitBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.
"
::= { cctActiveEntry 27 }
cctActiveCallSignalingType OBJECT-TYPE
SYNTAX CctCallSigType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signaling type used to setup the call.
"
::= { cctActiveEntry 28 }
-- *****************************************************************
-- Call Tracker History Group
-- *****************************************************************
-- When a call is terminated or rejected without answering, it
-- is moved from the active table to the history table.
cctHistoryTableEntriesLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper limit on the number of entries that the
cctHistoryTable may contain.
A value of zero will prevent any history from being
retained.
This value may not exceed the system specific limit
provided in cctHistoryTableMaxEntries.
"
::= { cctHistory 1 }
cctHistoryTableMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum allowed table length supported by this
system. The value of cctHistoryTableEntriesLimit may
not exceed this value.
"
::= { cctHistory 2 }
cctHistoryTableRetainTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum amount of time that an entry will be
maintained within the cctHistoryTable before being
deleted.
A value of zero will prevent any history from being
retained.
"
::= { cctHistory 3 }
-- The next two objects provide statistics to aid in
-- tuning the size of the cctHistoryTable.
cctHistoryTableNumberEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of entries currently in the
cctHistoryTable.
"
::= { cctHistory 4 }
cctHistoryTableHighWaterMark OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of entries present in cctHistoryTable
since last system re-initialization or the value
of cctHistoryTableEntriesLimit has been changed.
This corresponds to the maximum value reported by
cctHistoryTableNumberEntries.
Changing the value of cctHistoryTableEntriesLimit resets
this value to zero.
"
::= { cctHistory 5 }
cctHistoryTableNewestIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the index value of the most
recent entry currently in the cctHistoryTable.
A value of zero indicates there has never been an
entry in the table or all entries have expired.
"
::= { cctHistory 6 }
--
-- Call Tracker History Table
--
cctHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CctHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information on terminated calls.
"
::= { cctHistory 7 }
cctHistoryEntry OBJECT-TYPE
SYNTAX CctHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single terminated call.
An entry of this table is created when the system
initiates, detects, or is notified of a call
termination. Resources allocated to the call may
still be in use by the call when the entry is created.
An entry is deleted when it has existed in this table
longer than cctHistoryTableRetainTimer minutes.
An entry is also removed if the table is full and a new
entry needs to be created to accommodate a terminated
call. The oldest entry in the table will be deleted.
"
INDEX { cctHistoryIndex }
::= { cctHistoryTable 1 }
CctHistoryEntry ::=
SEQUENCE {
cctHistoryIndex Unsigned32,
cctHistoryCallId CctCallId,
cctHistorySetupTime TimeStamp,
cctHistoryOrigin INTEGER,
cctHistoryConnectionTime TimeStamp,
cctHistoryPhysicalLayerReadyTime TimeStamp,
cctHistoryServiceUpTime TimeStamp,
cctHistoryServiceType CctServiceType,
cctHistoryUserValidationTime TimeStamp,
cctHistoryUserId DisplayString,
cctHistoryUserIpAddr IpAddress,
cctHistoryUserSubnetMask IpAddress,
cctHistoryAccountingSessionId DisplayString,
cctHistoryCallCategory CctCallCategory,
cctHistoryInitialRxRate Unsigned32,
cctHistoryInitialTxRate Unsigned32,
cctHistoryResourceSlot Integer32,
cctHistoryResourcePort Integer32,
cctHistoryEntrySlot Integer32,
cctHistoryEntryPort Integer32,
cctHistoryEntryDs1 Integer32,
cctHistoryEntryChannel Integer32,
cctHistoryCalledPartyId DisplayString,
cctHistoryCallingPartyId DisplayString,
cctHistoryMpBundleId Unsigned32,
cctHistoryChargedUnits Gauge32,
cctHistoryReceiveBytes Gauge32,
cctHistoryTransmitBytes Gauge32,
cctHistoryDisconnectTime TimeStamp,
cctHistoryDisconnectReasonText DisplayString,
cctHistoryCallSignalingType CctCallSigType
}
cctHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A monotonically increasing integer for the sole purpose
of indexing terminated calls. When it reaches the
maximum value the agent wraps the value back to 1 and
will flush existing entries."
::= { cctHistoryEntry 1 }
cctHistoryCallId OBJECT-TYPE
SYNTAX CctCallId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call identifier for the call.
This is the same value assigned to the call in
cctActiveCallId when it was in the cctActiveTable.
It is possible for two cctHistoryEntry entries to have
the same cctHistoryCallId if one very long running call
terminates after the cctActiveCallId has wrapped around
and is reassigned to a new short lived call.
"
::= { cctHistoryEntry 2 }
cctHistorySetupTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the call was first made known to
the system.
"
::= { cctHistoryEntry 3 }
cctHistoryOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the call was created.
originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout
answer(2) - The call was initiated remotely and
the system received the setup request.
Dialin
"
::= { cctHistoryEntry 4 }
cctHistoryConnectionTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the system connected the call.
"
::= { cctHistoryEntry 5 }
cctHistoryPhysicalLayerReadyTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.
In the case of modem calls, the physical layer for the
call achieves a steady state when the data rates,
modulations, and error correcting protocols have been
negotiated between the originating and answering modems.
This is primarily intended for calls which connect to a
processing resource identified by cctHistoryResourceSlot
and cctHistoryResourcePort.
It also applies to digital calls using adaptive rate
technologies such as V.110 and V.120.
"
::= { cctHistoryEntry 6 }
cctHistoryServiceUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the call service type identified
in cctHistoryServiceType was established.
"
::= { cctHistoryEntry 7 }
cctHistoryServiceType OBJECT-TYPE
SYNTAX CctServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.
"
::= { cctHistoryEntry 8 }
cctHistoryUserValidationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the user identification
associated with this call was validated.
See cctHistoryUserId for description of user
identification.
"
::= { cctHistoryEntry 9 }
cctHistoryUserId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User login ID or zero length string if unavailable.
If this contains a non-zero length string, and
cctHistoryUserValidationTime is zero, then the user
failed validation.
"
::= { cctHistoryEntry 10 }
cctHistoryUserIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.
"
::= { cctHistoryEntry 11 }
cctHistoryUserSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.
"
::= { cctHistoryEntry 12 }
cctHistoryAccountingSessionId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accounting session identification assigned to this call
by AAA.
The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.
If no accounting session ID is assigned, the value is a
null string.
"
REFERENCE
"RFC 2139 RADIUS Accounting
The TACACS+ Protocol Version 1.78, Internet Draft
"
::= { cctHistoryEntry 13 }
cctHistoryCallCategory OBJECT-TYPE
SYNTAX CctCallCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The call category or type
"
::= { cctHistoryEntry 14 }
cctHistoryInitialRxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Initial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero if the call terminated prior to
an initial data rate determination.
"
::= { cctHistoryEntry 15 }
cctHistoryInitialTxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Initial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero if the call terminated prior to
an initial data rate determination.
"
::= { cctHistoryEntry 16 }
cctHistoryResourceSlot OBJECT-TYPE
SYNTAX Integer32 (-1..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of processing resource allocated to call.
In the case of a call requiring a modem resource, this is
the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctHistoryResourcePort uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.
"
::= { cctHistoryEntry 17 }
cctHistoryResourcePort OBJECT-TYPE
SYNTAX Integer32 (-1..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of processing resource allocated to call.
In the case of a call requiring a modem resource, this is
the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctHistoryResourceSlot uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.
"
::= { cctHistoryEntry 18 }
cctHistoryEntrySlot OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device slot containing the port on which the call
existed.
"
::= { cctHistoryEntry 19 }
cctHistoryEntryPort OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port within the device slot on which the
call existed.
"
::= { cctHistoryEntry 20 }
cctHistoryEntryDs1 OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.
If the physical port is of type DS1, this value is
identical to cctActiveEntryPort.
If the DS1 is a logical subinterface within the
physical port, this value is the number of the DS1
within this slot.
Examples:
8 port DS1 card - cctActiveEntryPort and
cctActiveEntryDs1 will have
identical values.
3 port T3 card - cctActiveEntryPort represents
T3 ports.
cctActiveEntryEntryDs1 represents
logical T1 interfaces.
Each T3 contains 28 T1 interfaces.
The T1 interfaces are numbered
sequentially across the entire
T3 card.
"
::= { cctHistoryEntry 22 }
cctHistoryEntryChannel OBJECT-TYPE
SYNTAX Integer32 (0..214783647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel or timeslot within the cctHistoryEntryDs1
which was allocated to the call.
"
::= { cctHistoryEntry 23 }
cctHistoryCalledPartyId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).
For calls originated by the system, this is the
destination number.
If not available the string length is zero.
"
::= { cctHistoryEntry 24 }
cctHistoryCallingPartyId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).
For calls originated by the system, this is the
number associated with the device.
For the interworking call, this object contains the
translated calling party number if there is a
translation rule is associated with dial plan for making
this outgoing call.
If not available this is a zero-length string.
"
::= { cctHistoryEntry 25 }
cctHistoryMpBundleId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multilink PPP bundle identification for call if
cctHistoryServiceType has the value 'mp'.
If the value of cctHistoryServiceType for this call is
not 'mp', then the value of this object is not
meaningful.
"
::= { cctHistoryEntry 26 }
cctHistoryChargedUnits OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.
"
REFERENCE
"AOC-D defined in ETSI Standard: ETS 300 179
"
::= { cctHistoryEntry 27 }
cctHistoryReceiveBytes OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.
"
::= { cctHistoryEntry 28 }
cctHistoryTransmitBytes OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.
"
::= { cctHistoryEntry 29 }
cctHistoryDisconnectTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when call was disconnected.
This is when the system initiates, detects, or is
notified of call termination.
This is the call duration from initial setup request.
"
::= { cctHistoryEntry 30 }
cctHistoryDisconnectReasonText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Text description of the disconnect reason provided.
Value is zero-length string if no text is available.
"
::= { cctHistoryEntry 31 }
cctHistoryCallSignalingType OBJECT-TYPE
SYNTAX CctCallSigType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signaling type used to setup the call.
"
::= { cctHistoryEntry 32 }
-- *****************************************************************
-- Call Tracker Notification Configuration Group
-- *****************************************************************
cctCallSetupTermNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controls generation of
cctCallSetupNotification and
cctCallTerminateNotification.
When this variable is 'true(1)', generation of
these notifications is enabled. When this
variable is 'false(2)', generation is disabled.
The default value is 'false(2)'.
"
::= { cctNotificationConfig 1 }
-- *****************************************************************
-- Notifications
-- *****************************************************************
cctMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoCallTrackerMIB 2 }
cctMIBNotifications OBJECT IDENTIFIER ::=
{ cctMIBNotificationPrefix 0 }
cctCallSetupNotification NOTIFICATION-TYPE
OBJECTS {
cctActiveSetupTime,
cctActiveCalledPartyId,
cctActiveCallingPartyId,
cctActiveCallCategory
}
STATUS current
DESCRIPTION
"A Call Tracker Setup notification is generated whenever
a new active call entry is created in the cctActiveTable.
"
::= { cctMIBNotifications 1 }
cctCallTerminateNotification NOTIFICATION-TYPE
OBJECTS {
cctHistoryCallId
}
STATUS current
DESCRIPTION
"A Call Tracker Terminate notification is generated whenever
a new history call entry is created in the cctHistoryTable.
"
::= { cctMIBNotifications 2 }
-- *****************************************************************
-- Conformance and Compliances
-- *****************************************************************
cctMIBConformance OBJECT IDENTIFIER ::=
{ ciscoCallTrackerMIB 3 }
cctMIBCompliances OBJECT IDENTIFIER ::=
{ cctMIBConformance 1 }
cctMIBGroups OBJECT IDENTIFIER ::=
{ cctMIBConformance 2 }
-- compliance statements
cctMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceded by cctMIBComplianceRev1
DESCRIPTION
"The compliance statement for entities which
implement the CISCO CALL TRACKER MIB"
MODULE -- this module
MANDATORY-GROUPS
{
cctGeneralGroup,
cctActiveGroup,
cctHistoryGroup,
cctNotificationConfigGroup,
cctNotificationGroup
}
::= { cctMIBCompliances 1 }
cctMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO CALL TRACKER MIB"
MODULE -- this module
MANDATORY-GROUPS
{
cctGeneralGroup,
cctActiveGroupRev1,
cctHistoryGroupRev1,
cctNotificationConfigGroup,
cctNotificationGroup
}
::= { cctMIBCompliances 2 }
-- units of conformance
cctGeneralGroup OBJECT-GROUP
OBJECTS {
cctCallIdPrefix
}
STATUS current
DESCRIPTION
"A collection of objects providing the
general information.
"
::= { cctMIBGroups 1 }
cctActiveGroup OBJECT-GROUP
OBJECTS {
cctActiveTableNumberEntries,
cctActiveTableHighWaterMark,
cctActiveSetupTime,
cctActiveOrigin,
cctActiveConnectionTime,
cctActivePhysicalLayerReadyTime,
cctActiveServiceUpTime,
cctActiveServiceType,
cctActiveUserValidationTime,
cctActiveUserId,
cctActiveUserIpAddr,
cctActiveUserSubnetMask,
cctActiveAccountingSessionId,
cctActiveCallCategory,
cctActiveInitialRxRate,
cctActiveInitialTxRate,
cctActiveResourceSlot,
cctActiveResourcePort,
cctActiveEntrySlot,
cctActiveEntryPort,
cctActiveEntryDs1,
cctActiveEntryChannel,
cctActiveCalledPartyId,
cctActiveCallingPartyId,
cctActiveMpBundleId,
cctActiveChargedUnits,
cctActiveReceiveBytes,
cctActiveTransmitBytes
}
STATUS deprecated -- superceded by cctActiveGroupRev1
DESCRIPTION
"A collection of objects providing the
active call information.
"
::= { cctMIBGroups 2 }
cctHistoryGroup OBJECT-GROUP
OBJECTS {
cctHistoryTableEntriesLimit,
cctHistoryTableMaxEntries,
cctHistoryTableRetainTimer,
cctHistoryTableNumberEntries,
cctHistoryTableHighWaterMark,
cctHistoryTableNewestIndex,
cctHistoryCallId,
cctHistorySetupTime,
cctHistoryOrigin,
cctHistoryConnectionTime,
cctHistoryPhysicalLayerReadyTime,
cctHistoryServiceUpTime,
cctHistoryServiceType,
cctHistoryUserValidationTime,
cctHistoryUserId,
cctHistoryUserIpAddr,
cctHistoryUserSubnetMask,
cctHistoryAccountingSessionId,
cctHistoryCallCategory,
cctHistoryInitialRxRate,
cctHistoryInitialTxRate,
cctHistoryResourceSlot,
cctHistoryResourcePort,
cctHistoryEntrySlot,
cctHistoryEntryPort,
cctHistoryEntryDs1,
cctHistoryEntryChannel,
cctHistoryCalledPartyId,
cctHistoryCallingPartyId,
cctHistoryMpBundleId,
cctHistoryChargedUnits,
cctHistoryReceiveBytes,
cctHistoryTransmitBytes,
cctHistoryDisconnectTime,
cctHistoryDisconnectReasonText
}
STATUS deprecated -- superceded by cctHistoryGroupRev1
DESCRIPTION
"A collection of objects providing the
historical call information.
"
::= { cctMIBGroups 3 }
cctNotificationConfigGroup OBJECT-GROUP
OBJECTS {
cctCallSetupTermNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing the
notification configuration.
"
::= { cctMIBGroups 4 }
cctNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cctCallSetupNotification,
cctCallTerminateNotification
}
STATUS current
DESCRIPTION
"The collection of notifications used for
call status changes.
"
::= { cctMIBGroups 5 }
cctActiveGroupRev1 OBJECT-GROUP
OBJECTS {
cctActiveTableNumberEntries,
cctActiveTableHighWaterMark,
cctActiveSetupTime,
cctActiveOrigin,
cctActiveConnectionTime,
cctActivePhysicalLayerReadyTime,
cctActiveServiceUpTime,
cctActiveServiceType,
cctActiveUserValidationTime,
cctActiveUserId,
cctActiveUserIpAddr,
cctActiveUserSubnetMask,
cctActiveAccountingSessionId,
cctActiveCallCategory,
cctActiveInitialRxRate,
cctActiveInitialTxRate,
cctActiveResourceSlot,
cctActiveResourcePort,
cctActiveEntrySlot,
cctActiveEntryPort,
cctActiveEntryDs1,
cctActiveEntryChannel,
cctActiveCalledPartyId,
cctActiveCallingPartyId,
cctActiveMpBundleId,
cctActiveChargedUnits,
cctActiveReceiveBytes,
cctActiveTransmitBytes,
cctActiveCallSignalingType
}
STATUS current
DESCRIPTION
"A collection of objects providing the
active call information.
"
::= { cctMIBGroups 6 }
cctHistoryGroupRev1 OBJECT-GROUP
OBJECTS {
cctHistoryTableEntriesLimit,
cctHistoryTableMaxEntries,
cctHistoryTableRetainTimer,
cctHistoryTableNumberEntries,
cctHistoryTableHighWaterMark,
cctHistoryTableNewestIndex,
cctHistoryCallId,
cctHistorySetupTime,
cctHistoryOrigin,
cctHistoryConnectionTime,
cctHistoryPhysicalLayerReadyTime,
cctHistoryServiceUpTime,
cctHistoryServiceType,
cctHistoryUserValidationTime,
cctHistoryUserId,
cctHistoryUserIpAddr,
cctHistoryUserSubnetMask,
cctHistoryAccountingSessionId,
cctHistoryCallCategory,
cctHistoryInitialRxRate,
cctHistoryInitialTxRate,
cctHistoryResourceSlot,
cctHistoryResourcePort,
cctHistoryEntrySlot,
cctHistoryEntryPort,
cctHistoryEntryDs1,
cctHistoryEntryChannel,
cctHistoryCalledPartyId,
cctHistoryCallingPartyId,
cctHistoryMpBundleId,
cctHistoryChargedUnits,
cctHistoryReceiveBytes,
cctHistoryTransmitBytes,
cctHistoryDisconnectTime,
cctHistoryDisconnectReasonText,
cctHistoryCallSignalingType
}
STATUS current
DESCRIPTION
"A collection of objects providing the
historical call information.
"
::= { cctMIBGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink