MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ATM-VIRTUAL-IF-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1890 lines
67 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoAtmVirtualIf MIB
--
-- Oct. 2002, Prasanna Mucharikar
--
-- Copyright (c) 1999, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ATM-VIRTUAL-IF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter64,
Counter32,
Unsigned32 FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC
AtmVpIdentifier FROM ATM-TC-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
InterfaceIndex,
ifIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI;
ciscoAtmVirtualIfMIB MODULE-IDENTITY
LAST-UPDATED "200210110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to manage ATM Virtual interface objects.
ATM virtual interfaces are configured on a physical line."
REVISION "200210110000Z"
DESCRIPTION
"1. Added caviIngressIntervalTable. "
REVISION "200205070000Z"
DESCRIPTION
"1. Added following objects to caviStatEgressTable, as
upper 32-bits for 64-bit wide counters:
caviHighEgrRcvClp0Cells, caviHighEgrRcvClp1Cells,
caviHighEgrClp0DiscCells, caviHighEgrClp1DiscCells,
caviHighEgrXmtClp0Cells, caviHighEgrXmtClp1Cells.
2. Added following 64-bit objects to
caviStatEgressTable for 64-bit counter support:
caviHEgrRcvClp0Cells, caviHEgrClp0DiscCells,
caviHEgrClp0DiscCells, caviHEgrClp1DiscCells.
3. Added following objects to caviEgressIntervalTable,
as upper 32-bits for 64-bit wide counters:
caviHighIntEgrRcvClp0Cells,
caviHighIntEgrRcvClp1Cells,
caviHighIntEgrClp0DiscCells,
caviHighIntEgrClp1DiscCells,
caviHighIntEgrXmtClp0Cells,
caviHighIntEgrXmtClp1Cells.
4. Added following 64-bit objects to
caviEgressIntervalTable:
caviHIntEgrRcvClp0Cells, caviHIntEgrRcvClp1Cells,
caviHIntEgrClp0DiscCells, caviHIntEgrClp1DiscCells,
caviHIntEgrXmtClp0Cells, caviHIntEgrXmtClp1Cells.
5. Added following objects to caviStatIngressTable, as
upper 32-bits for 64-bit wide counters:
caviHighIngRcvClp0Cells, caviHighIngRcvClp1Cells,
caviHighIngClp0DiscCells, caviHighIngClp1DiscCells,
caviHighIngXmtClp0Cells, caviHighIngXmtClp1Cells.
6. Added following 64-bit objects to
caviStatIngressTable:
caviHIngClp0DiscCells, caviHIngClp1DiscCells,
caviHIngXmtClp0Cells, caviHIngXmtClp1Cells.
7. Changed IMPORT for Unsigned32 to SNMPv2-SMI, instead
of CISCO-TC."
REVISION "200109030000Z"
DESCRIPTION
"Added caviMinVpiNum and caviMaxVpiNum. Modified description
for caviEntry and caviIfType."
REVISION "200008110000Z"
DESCRIPTION
"Changed description of objects caviMinRate and caviMaxRate.
Modified range for caviMinRate, caviMaxRate and
caviFileId."
REVISION "200001140000Z"
DESCRIPTION
"Initial version of this MIB module."
::= {ciscoMgmt 129 }
ciscoAtmVirtualIfMIBObjects
OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIB 1}
caviConfig OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIBObjects 1}
caviStatistics OBJECT IDENTIFIER ::= { ciscoAtmVirtualIfMIBObjects 2}
-- ---------------------------------------------------------------------
-- cisco ATM Virtual Interface Config Group
-- ---------------------------------------------------------------------
caviTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaviEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for creating ATM virtual Interfaces.
The ATM virtual interfaces are created on physical interfaces.
For each entry created in this table, there will be an entry
created in the ifTable with ifType atmVirtual(149).
For each entry deleted from this table, the corresponding entry
from ifTable will be deleted. The ifIndex value for ifType
atmVirtual(149) is used for indexing to atmInterfaceConfTable
for getting information on a ATM virtual interface."
::= { caviConfig 1 }
caviEntry OBJECT-TYPE
SYNTAX CaviEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the caviTable table for each ATM virtual interface.
An entry in this table can only be created if values for all
objects in a row are provided.
The caviVpiNum object is applicable only to interfaces of
caviIfType vnni (3) or vuni (4).
The caviMinVpiNum and caviMaxVpiNum are applicable only to
interfaces of caviIfType evuni(5) or evnni(6)."
INDEX { caviIndex }
::= { caviTable 1 }
CaviEntry ::=
SEQUENCE {
caviIndex Integer32,
caviPhyIfIndex InterfaceIndex ,
caviViIfIndex InterfaceIndex,
caviMinRate Unsigned32,
caviMaxRate Unsigned32,
caviFileId Unsigned32,
caviIfType INTEGER,
caviVpiNum AtmVpIdentifier,
caviRowStatus RowStatus,
caviMinVpiNum AtmVpIdentifier,
caviMaxVpiNum AtmVpIdentifier
}
caviIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for the ATM virtual interface."
::= { caviEntry 1 }
caviPhyIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the interface number ( 'ifIndex' ) assigned
to sonet(39),ds3(30),ds1(18),atmIma(107)."
::= { caviEntry 2 }
caviViIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the ATM virtual interface number
('ifIndex') assigned to this entry, and is used
to identify corresponding rows in the IF-MIB.
Note that re-inititalization of the management agent may
cause a client's 'caviViIfIndex' to change."
::= { caviEntry 3 }
caviMinRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "cells-per-second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ATM virtual interface's guaranteed cell rate.
This is the guaranteed bandwidth allocated for
the interface. The sum of caviMinRate of all ATM
virtual interfaces configured on a single physical line,
must not exceed the bandwidth of the physical line. Creation
of a row is rejected when the sum of caviMinRate of all existing
ATM virtual interfaces exceeds the physical line bandwidth.
The value of this object can't exceed the 'ifSpeed' or
'ifHighSpeed' value in ifTable for the associated
'caviPhyIfIndex'.
ATM cell bandwidths for various physical lines are:
OC192 line : 22605280 cells/sec
OC48 line : 5651320 cells/sec
OC12 line : 1412830 cells/sec
OC3 line : 353207 cells/sec
T3 line : 96000 cells/sec
E3 line : 80000 cells/sec."
::= { caviEntry 4 }
caviMaxRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "cells-per-second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ATM virtual interface's maximum cell rate.
If bandwidth is available, the interface will
be allocated bandwidth upto this value.
The total bandwidth of connections configured over this
interface cannot exceed this value.
The value of this object can't exceed the 'ifSpeed' or
'ifHighSpeed' value in ifTable for the associated
'caviPhyIfIndex'.
ATM cell bandwidths for various physical lines are:
OC192 line : 22605280 cells/sec
OC48 line : 5651320 cells/sec
OC12 line : 1412830 cells/sec
OC3 line : 353207 cells/sec
T3 line : 96000 cells/sec
E3 line : 80000 cells/sec."
::= {caviEntry 5 }
caviFileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID of the file that holds module specific configuration
parameters for this ATM virtual interface."
DEFVAL { 0 }
::= { caviEntry 6 }
caviIfType OBJECT-TYPE
SYNTAX INTEGER {
uni(1),
nni(2),
vnni(3),
vuni(4),
evuni(5),
evnni(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object reflects the type of ATM virtual interface that can be
configured within a physical interface. The supported types of virtual
interfaces and their description is shown below:
uni : Only one virtual interface of uni type can be configured within
a physical interface. The ATM cells used in this interface would
use a 8 bit VPI and a 4 bit GFC.
nni : Only one virtual interface of nni type can be configured within
a physical interface.The ATM cells used in this interface would
use a 12 bit VPI.
vnni: Multiple virtual interfaces of vnni type can be configured
within a physical interface. However, all cells sent on this
interface belong to a single VPI (defined by caviVpiNum) and
the cells use a 12 bit VPI.
vuni: Multiple virtual interfaces of vuni type can be configured
within a physical interface. However, all cells sent on this
interface belong to a single VPI (defined by caviVpiNum) and
the cells use a 8 bit VPI and a 4 bit GFC.
evuni: Multiple virtual interfaces of evuni type can be configured
within a physical interface. However, all cells sent on this
interface belong to a range of VPI (defined by caviMinVpiNum
& caviMaxVpiNum) and the cells use a 8 bit VPI and a 4 bit GFC.
evnni: Multiple virtual interfaces of evuni type can be configured
within a physical interface. However, all cells sent on this
interface belong to a range of VPI (defined by caviMinVpiNum
& caviMaxVpiNum) and the cells use a 12 bit VPI."
DEFVAL { uni }
::= { caviEntry 7 }
caviVpiNum OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used when configuring ATM virtual interfaces of
caviIftype vuni(4) or vnni (3). A non-zero value is required
for vuni / vnni operation.
The value set in this object for other type of caviIfTypes
would be ignored by the agent. The GET operation on this object
would return 0 for caviIfTypes other than vuni/vnni."
DEFVAL { 0 }
::= { caviEntry 8 }
caviRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows create and delete operations on caviTable
entries.
An entry is created in the table by setting this object to
createAndGo(4).
An entry is deleted from the table by setting this object to
destroy(6).
An entry in this table may be modified after creation."
::= {caviEntry 9 }
caviMinVpiNum OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
The evuni accepts a range from 0 to 255, while the evnni accepts
a range from 0 to 4095.
The object specifies the minimum VPI for a evuni/evnni interface.
The agent ignores a SET on this object for any interface other
than a evuni/evnni. A GET operation for interfaces other than a
evuni/evnni would always yield 0"
DEFVAL { 0 }
::= { caviEntry 10 }
caviMaxVpiNum OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
The evuni accepts a range from 0 to 255, while the evnni accepts
a range from 0 to 4095.
The agent rejects a SET on this object for any interface other
than a evuni/evnni. A GET operation for interfaces other than a
evuni/evnni would always yield 0"
::= { caviEntry 11 }
-- ---------------------------------------------------------------------
-- ATM Virtual Interface Egress Statistics Table
-- ---------------------------------------------------------------------
caviStatEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaviStatEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reflects real time statistics associated with
each of the ATM virtual interfaces on the egress side.
Ingress direction means coming from network into switch,
Egress direction means going from switch into the network."
::= { caviStatistics 1 }
caviStatEgressEntry OBJECT-TYPE
SYNTAX CaviStatEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for egress ATM virtual interface statistics. In all the following
descriptions,
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
Statistics are being collected before and after the traffic
management and policing device."
INDEX { ifIndex }
::= { caviStatEgressTable 1 }
CaviStatEgressEntry ::=
SEQUENCE {
caviEgrRcvClp0Cells Counter32,
caviEgrRcvClp1Cells Counter32,
caviEgrClp0DiscCells Counter32,
caviEgrClp1DiscCells Counter32,
caviEgrXmtClp0Cells Counter32,
caviEgrXmtClp1Cells Counter32,
caviEgrRcvOAMCells Counter32,
caviEgrRMCells Counter32,
caviEgrXmtEFCICells Counter32,
caviEgrRcvEFCICells Counter32,
caviEgrXmtOAMCells Counter32,
caviHEgrXmtClp0Cells Counter64,
caviHEgrXmtClp1Cells Counter64,
caviHighEgrRcvClp0Cells Counter32,
caviHighEgrRcvClp1Cells Counter32,
caviHighEgrClp0DiscCells Counter32,
caviHighEgrClp1DiscCells Counter32,
caviHighEgrXmtClp0Cells Counter32,
caviHighEgrXmtClp1Cells Counter32,
caviHEgrRcvClp0Cells Counter64,
caviHEgrRcvClp1Cells Counter64,
caviHEgrClp0DiscCells Counter64,
caviHEgrClp1DiscCells Counter64
}
caviEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells received from switch
at the traffic management and policing device."
::= {caviStatEgressEntry 1 }
caviEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells received from switch
at the traffic management and policing device."
::= {caviStatEgressEntry 2 }
caviEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells discarded due to policing."
::= {caviStatEgressEntry 3 }
caviEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells discarded due to policing."
::= {caviStatEgressEntry 4 }
caviEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells transmitted to the network
after traffic management and policing."
::= {caviStatEgressEntry 5 }
caviEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells transmitted to the network
after traffic management and policing."
::= {caviStatEgressEntry 6 }
caviEgrRcvOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received from the switch
at the traffic management and policing device."
::= {caviStatEgressEntry 7 }
caviEgrRMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RM cells transmitted to the network from the switch."
::= {caviStatEgressEntry 8 }
caviEgrXmtEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells transmitted to the network
after traffic management and policing."
::= {caviStatEgressEntry 9 }
caviEgrRcvEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells received from the switch
at traffic management and policing device."
::= {caviStatEgressEntry 10 }
caviEgrXmtOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM loopback cells transmitted to network
after traffic management and policing."
::= {caviStatEgressEntry 11 }
caviHEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of caviEgrXmtClp0Cells."
::= {caviStatEgressEntry 12 }
caviHEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of caviEgrXmtClp1Cells."
::= {caviStatEgressEntry 13 }
caviHighEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-0 cells received
from switch at the traffic management and policing
device."
::= {caviStatEgressEntry 14 }
caviHighEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-1 cells received
from switch at the traffic management and policing
device."
::= {caviStatEgressEntry 15 }
caviHighEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-0 cells discarded
due to policing."
::= {caviStatEgressEntry 16 }
caviHighEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-1 cells discarded
due to policing."
::= {caviStatEgressEntry 17 }
caviHighEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-0 cells
transmitted to the network after traffic management and
policing."
::= {caviStatEgressEntry 18 }
caviHighEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper 32 bit of the number of CLP-1 cells
transmitted to the network after traffic management and
policing."
::= {caviStatEgressEntry 19 }
caviHEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells received
from switch at the traffic management and policing
device."
::= {caviStatEgressEntry 20 }
caviHEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells received
from switch at the traffic management and policing
device."
::= {caviStatEgressEntry 21 }
caviHEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells
discarded due to policing."
::= {caviStatEgressEntry 22 }
caviHEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells
discarded due to policing."
::= {caviStatEgressEntry 23 }
-- ---------------------------------------------------------------------
-- ATM Virtual Interface Egress Interval Statistics Table
-- ---------------------------------------------------------------------
caviEgressIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaviEgressIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reflects interval statistics associated with
each of the ATM virtual interfaces in egress direction."
::= { caviStatistics 2 }
caviEgressIntervalEntry OBJECT-TYPE
SYNTAX CaviEgressIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for egress ATM virtual interface interval statistics.
In addition to the current 15-minute interval bucket, the previous
24 hours worth of 15-minute interval buckets are collected for each
ATM virtual interface.
Statistics are being collected before and after the traffic
management and policing device, in egress direction."
INDEX { ifIndex, caviEgressIntervalNumber }
::= { caviEgressIntervalTable 1 }
CaviEgressIntervalEntry ::=
SEQUENCE {
caviEgressIntervalNumber Unsigned32,
caviIntEgrRcvClp0Cells Counter32,
caviIntEgrRcvClp1Cells Counter32,
caviIntEgrClp0DiscCells Counter32,
caviIntEgrClp1DiscCells Counter32,
caviIntEgrXmtClp0Cells Counter32,
caviIntEgrXmtClp1Cells Counter32,
caviIntEgrRcvOAMCells Counter32,
caviIntEgrRMCells Counter32,
caviIntEgrXmtEFCICells Counter32,
caviIntEgrRcvEFCICells Counter32,
caviIntEgrXmtOAMCells Counter32,
caviHighIntEgrRcvClp0Cells Counter32,
caviHighIntEgrRcvClp1Cells Counter32,
caviHighIntEgrClp0DiscCells Counter32,
caviHighIntEgrClp1DiscCells Counter32,
caviHighIntEgrXmtClp0Cells Counter32,
caviHighIntEgrXmtClp1Cells Counter32,
caviHIntEgrRcvClp0Cells Counter64,
caviHIntEgrRcvClp1Cells Counter64,
caviHIntEgrClp0DiscCells Counter64,
caviHIntEgrClp1DiscCells Counter64,
caviHIntEgrXmtClp0Cells Counter64,
caviHIntEgrXmtClp1Cells Counter64
}
caviEgressIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number used to uniquely identify a ATM virtual interface's
interval statistics. 0 is used to identify the current
15-minute interval. 1-96 identify the previous 24 hours
of 15-minute interval buckets."
::= { caviEgressIntervalEntry 1 }
caviIntEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells received from switch
at the traffic management and policing device
during a 15 minute interval."
::= { caviEgressIntervalEntry 2 }
caviIntEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells received from switch
at the traffic management and policing device
during a 15 minute interval."
::= { caviEgressIntervalEntry 3 }
caviIntEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells discarded due to policing
during a 15 minute interval."
::= { caviEgressIntervalEntry 4 }
caviIntEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells discarded due to policing
during a 15 minute interval."
::= { caviEgressIntervalEntry 5 }
caviIntEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells transmitted to the network
after traffic management and policing
during a 15 minute interval."
::= { caviEgressIntervalEntry 6 }
caviIntEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells transmitted to the network
after traffic management and policing during a 15 minute
interval."
::= { caviEgressIntervalEntry 7 }
caviIntEgrRcvOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received from the switch
at the traffic management and policing device
during a 15 minute interval."
::= { caviEgressIntervalEntry 8 }
caviIntEgrRMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RM cells transmitted to the network from the switch
during a 15 minute interval."
::= { caviEgressIntervalEntry 9 }
caviIntEgrXmtEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells transmitted to the network
after traffic management and policing during a 15 minute
interval."
::= { caviEgressIntervalEntry 10 }
caviIntEgrRcvEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells received from the switch
at traffic management and policing device during a 15
minute interval."
::= { caviEgressIntervalEntry 11 }
caviIntEgrXmtOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM loopback cells transmitted to network
after traffic management and policing during a 15 minute
interval."
::= { caviEgressIntervalEntry 12 }
caviHighIntEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells received
from switch at the traffic management and policing
device during a 15 minute interval."
::= { caviEgressIntervalEntry 13 }
caviHighIntEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells received
from switch at the traffic management and policing
device during a 15 minute interval."
::= { caviEgressIntervalEntry 14 }
caviHighIntEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells discarded
due to policing during a 15 minute interval."
::= { caviEgressIntervalEntry 15 }
caviHighIntEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells discarded
due to policing during a 15 minute interval."
::= { caviEgressIntervalEntry 16 }
caviHighIntEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells
transmitted to the network after traffic management and
policing during a 15 minute interval."
::= { caviEgressIntervalEntry 17 }
caviHighIntEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells
transmitted to the network after traffic management and
policing during a 15 minute interval."
::= { caviEgressIntervalEntry 18 }
caviHIntEgrRcvClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells received
from switch at the traffic management and policing
device during a 15 minute interval."
::= { caviEgressIntervalEntry 19 }
caviHIntEgrRcvClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells received
from switch at the traffic management and policing
device during a 15 minute interval."
::= { caviEgressIntervalEntry 20 }
caviHIntEgrClp0DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells
discarded due to policing during a 15 minute
interval."
::= { caviEgressIntervalEntry 21 }
caviHIntEgrClp1DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells
discarded due to policing during a 15 minute
interval."
::= { caviEgressIntervalEntry 22 }
caviHIntEgrXmtClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells
transmitted to the network after traffic management and
policing during a 15 minute interval."
::= { caviEgressIntervalEntry 23 }
caviHIntEgrXmtClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells
transmitted to the network after traffic management and
policing during a 15 minute interval."
::= { caviEgressIntervalEntry 24 }
-- ---------------------------------------------------------------------
-- ATM Virtual Interface Ingress Statistics Table
-- ---------------------------------------------------------------------
caviStatIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaviStatIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reflects real time statistics associated with
each of the ATM virtual interfaces on the ingress side."
::= { caviStatistics 3 }
caviStatIngressEntry OBJECT-TYPE
SYNTAX CaviStatIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for egress ATM virtual interface statistics. In all the following
descriptions,
CLP-0 means Cell Loss Priority = 0,
CLP-1 means Cell Loss Priority = 1.
Statistics are being collected before and after the traffic
management and policing device."
INDEX { ifIndex }
::= { caviStatIngressTable 1 }
CaviStatIngressEntry ::=
SEQUENCE {
caviIngRcvClp0Cells Counter32,
caviIngRcvClp1Cells Counter32,
caviIngClp0DiscCells Counter32,
caviIngClp1DiscCells Counter32,
caviIngXmtClp0Cells Counter32,
caviIngXmtClp1Cells Counter32,
caviIngRcvOAMCells Counter32,
caviIngRMCells Counter32,
caviIngXmtEFCICells Counter32,
caviIngRcvEFCICells Counter32,
caviIngXmtOAMCells Counter32,
caviHIngRcvClp0Cells Counter64,
caviHIngRcvClp1Cells Counter64,
caviHighIngRcvClp0Cells Counter32,
caviHighIngRcvClp1Cells Counter32,
caviHighIngClp0DiscCells Counter32,
caviHighIngClp1DiscCells Counter32,
caviHighIngXmtClp0Cells Counter32,
caviHighIngXmtClp1Cells Counter32,
caviHIngClp0DiscCells Counter64,
caviHIngClp1DiscCells Counter64,
caviHIngXmtClp0Cells Counter64,
caviHIngXmtClp1Cells Counter64
}
caviIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells received from network
at the traffic management and policing device in
ingress direction."
::= {caviStatIngressEntry 1 }
caviIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells received from network
at the traffic management and policing device in
ingress direction."
::= {caviStatIngressEntry 2 }
caviIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells discarded due to policing in
ingress direction."
::= {caviStatIngressEntry 3 }
caviIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells discarded due to policing in
ingress direction."
::= {caviStatIngressEntry 4 }
caviIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells transmitted to the switch
after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 5 }
caviIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells transmitted to the switch
after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 6 }
caviIngRcvOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received from the network
at the traffic management and policing device in
ingress direction."
::= {caviStatIngressEntry 7 }
caviIngRMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RM cells transmitted to the switch from the network in
ingress direction."
::= {caviStatIngressEntry 8 }
caviIngXmtEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells transmitted to the switch
after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 9 }
caviIngRcvEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells received from the network
at traffic management and policing device in
ingress direction."
::= {caviStatIngressEntry 10 }
caviIngXmtOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM loopback cells transmitted to switch
after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 11 }
caviHIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of caviIngRcvClp0Cells in
ingress direction."
::= {caviStatIngressEntry 12 }
caviHIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of caviIngRcvClp1Cells in
ingress direction."
::= {caviStatIngressEntry 13 }
caviHighIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells received
from network at the traffic management and policing device
in ingress direction."
::= {caviStatIngressEntry 14 }
caviHighIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells received
from network at the traffic management and policing device
in ingress direction."
::= {caviStatIngressEntry 15 }
caviHighIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells discarded
due to policing in ingress direction."
::= {caviStatIngressEntry 16 }
caviHighIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells discarded
due to policing in ingress direction."
::= {caviStatIngressEntry 17 }
caviHighIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells transmitted
to the switch after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 18 }
caviHighIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells transmitted
to the switch after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 19 }
caviHIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells discarded
due to policing in ingress direction."
::= {caviStatIngressEntry 20 }
caviHIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells discarded
due to policing in ingress direction."
::= {caviStatIngressEntry 21 }
caviHIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells transmitted
to the switch after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 22 }
caviHIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells transmitted
to the switch after traffic management and policing in
ingress direction."
::= {caviStatIngressEntry 23 }
-- ---------------------------------------------------------------------
-- ATM Virtual Interface Ingress Interval Statistics Table
-- ---------------------------------------------------------------------
caviIngressIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaviIngressIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table reflects interval statistics associated with
each of the ATM virtual interfaces on the ingress side."
::= { caviStatistics 4 }
caviIngressIntervalEntry OBJECT-TYPE
SYNTAX CaviIngressIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for ingress ATM virtual interface interval
statistics.
In addition to the current 15-minute interval bucket,
the previous 24 hours worth of 15-minute interval buckets
are collected for each ATM virtual interface.
Statistics are being collected before and after the traffic
management and policing device, in ingress direction."
INDEX { ifIndex, caviIngressIntervalNumber }
::= { caviIngressIntervalTable 1 }
CaviIngressIntervalEntry ::=
SEQUENCE {
caviIngressIntervalNumber Unsigned32,
caviIntIngRcvClp0Cells Counter32,
caviIntIngRcvClp1Cells Counter32,
caviIntIngClp0DiscCells Counter32,
caviIntIngClp1DiscCells Counter32,
caviIntIngXmtClp0Cells Counter32,
caviIntIngXmtClp1Cells Counter32,
caviIntIngRcvOAMCells Counter32,
caviIntIngRMCells Counter32,
caviIntIngXmtEFCICells Counter32,
caviIntIngRcvEFCICells Counter32,
caviIntIngXmtOAMCells Counter32,
caviHighIntIngRcvClp0Cells Counter32,
caviHighIntIngRcvClp1Cells Counter32,
caviHighIntIngClp0DiscCells Counter32,
caviHighIntIngClp1DiscCells Counter32,
caviHighIntIngXmtClp0Cells Counter32,
caviHighIntIngXmtClp1Cells Counter32,
caviHIntIngRcvClp0Cells Counter64,
caviHIntIngRcvClp1Cells Counter64,
caviHIntIngClp0DiscCells Counter64,
caviHIntIngClp1DiscCells Counter64,
caviHIntIngXmtClp0Cells Counter64,
caviHIntIngXmtClp1Cells Counter64
}
caviIngressIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(0..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number used to uniquely identify a ATM virtual interface's
interval statistics. 0 is used to identify the current
15-minute interval, which is currently being updated.
1-96 identify the previous 24 hours of 15-minute interval
buckets, where interval 1 representing the most recent
15-minute interval and interval 96 representing the least
recent 15-minute interval"
::= { caviIngressIntervalEntry 1 }
caviIntIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells received from network
at the traffic management and policing device in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 2 }
caviIntIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells received from network
at the traffic management and policing device in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 3 }
caviIntIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells discarded due to policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 4 }
caviIntIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells discarded due to policing in
ingress direction, during a 15-minute interval ."
::= {caviIngressIntervalEntry 5 }
caviIntIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-0 cells transmitted to the switch
after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 6 }
caviIntIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP-1 cells transmitted to the switch
after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 7 }
caviIntIngRcvOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received from the network
at the traffic management and policing device in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 8 }
caviIntIngRMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RM cells transmitted to the switch from the
network in ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 9 }
caviIntIngXmtEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells transmitted to the switch
after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 10 }
caviIntIngRcvEFCICells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of EFCI cells received from the network
at traffic management and policing device in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 11 }
caviIntIngXmtOAMCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM loopback cells transmitted to switch
after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 12 }
caviHighIntIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells received
from network at the traffic management and policing device
in ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 13 }
caviHighIntIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells received
from network at the traffic management and policing device
in ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 14 }
caviHighIntIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells discarded
due to policing in ingress direction, during a 15-minute
interval."
::= {caviIngressIntervalEntry 15 }
caviHighIntIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells discarded
due to policing in ingress direction, during a 15-minute
interval."
::= {caviIngressIntervalEntry 16 }
caviHighIntIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-0 cells transmitted
to the switch after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 17 }
caviHighIntIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits of the number of CLP-1 cells transmitted
to the switch after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 18 }
caviHIntIngRcvClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of the number of CLP-0 cells received
from network at the traffic management and policing device
in ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 19 }
caviHIntIngRcvClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64-bit version of the number of CLP-1 cells received
from network at the traffic management and policing device
in ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 20 }
caviHIntIngClp0DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells discarded
due to policing in ingress direction, during a 15-minute
interval."
::= {caviIngressIntervalEntry 21 }
caviHIntIngClp1DiscCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells discarded
due to policing in ingress direction, during a 15-minute
interval."
::= {caviIngressIntervalEntry 22 }
caviHIntIngXmtClp0Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-0 cells transmitted
to the switch after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 23 }
caviHIntIngXmtClp1Cells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bit version of the number of CLP-1 cells transmitted
to the switch after traffic management and policing in
ingress direction, during a 15-minute interval."
::= {caviIngressIntervalEntry 24 }
-- conformance information
caviMIBConformance OBJECT IDENTIFIER ::= {ciscoAtmVirtualIfMIB 3}
caviMIBCompliances OBJECT IDENTIFIER ::= {caviMIBConformance 1}
caviMIBGroups OBJECT IDENTIFIER ::= {caviMIBConformance 2}
caviMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- replaced by caviMIBComplianceRev1
DESCRIPTION
"The Compliance statement for cisco AtmVirtualIf management group."
MODULE -- this module
MANDATORY-GROUPS { caviMIBGroup, caviEgressStatMIBGroup }
GROUP caviEgressHighSpeedStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that has interface speeds of OC12 or
higher."
GROUP caviEgressIntervalMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual interface
interval statistics."
GROUP caviIngressStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual interface
Ingress statistics."
GROUP caviIngressHighSpeedStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual interface
Ingress statistics for interface speeds of OC12 or higher."
::= {caviMIBCompliances 1}
caviMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated -- replaced by caviMIBComplianceRev2
DESCRIPTION
"Compliance statement for cisco AtmVirtualIf management group
with support for virtual user and network ports"
MODULE -- this module
MANDATORY-GROUPS { caviMIBGroupRev1, caviEgressStatMIBGroup }
GROUP caviEgressHighSpeedStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that has interface speeds
of OC12 or higher."
GROUP caviEgressIntervalMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual
interface interval statistics."
GROUP caviIngressStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual
interface Ingress statistics."
GROUP caviIngressHighSpeedStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports ATM virtual
interface Ingress statistics for interface speeds of OC12 or
higher."
::= {caviMIBCompliances 2}
caviMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated -- replaced by caviMIBComplianceRev3
DESCRIPTION
"Compliance statement for cisco AtmVirtualIf management
group with support for virtual user and network ports"
MODULE -- this module
MANDATORY-GROUPS { caviMIBGroupRev1, caviEgressStatMIBGroup1 }
GROUP caviEgressHighSpeedStatMIBGroup1
DESCRIPTION
"This group is mandatory for the system that has
interface speeds of OC12 or higher."
GROUP caviEgressIntervalMIBGroup1
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface interval statistics."
GROUP caviIngressStatMIBGroup1
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface Ingress statistics."
GROUP caviIngHighSpeedStatMIBGroup1
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface Ingress statistics for interface
speeds of OC12 or higher."
::= {caviMIBCompliances 3}
caviMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for cisco AtmVirtualIf management
group with support for virtual user and network ports"
MODULE -- this module
MANDATORY-GROUPS { caviMIBGroupRev1, caviEgressStatMIBGroup1 }
GROUP caviEgressHighSpeedStatMIBGroup1
DESCRIPTION
"This group is mandatory for the system that has
interface speeds of OC12 or higher."
GROUP caviEgressIntervalMIBGroup1
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface interval statistics."
GROUP caviIngressStatMIBGroup1
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface Ingress statistics."
GROUP caviIngHighSpeedStatMIBGroup2
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface Ingress statistics for interface
speeds of OC12 or higher."
GROUP caviIngressIntervalStatMIBGroup
DESCRIPTION
"This group is mandatory for the system that supports
ATM virtual interface Ingress statistics."
::= {caviMIBCompliances 4}
-- units of conformance
caviMIBGroup OBJECT-GROUP
OBJECTS {
caviPhyIfIndex,
caviViIfIndex,
caviMinRate,
caviMaxRate,
caviFileId,
caviIfType,
caviVpiNum,
caviRowStatus
}
STATUS deprecated -- replaced by caviMIBGroupRev1
DESCRIPTION
"These are objects related to ciscoAtmVirtualIf configuration group."
::= { caviMIBGroups 1}
caviEgressStatMIBGroup OBJECT-GROUP
OBJECTS {
caviEgrRcvClp0Cells,
caviEgrRcvClp1Cells,
caviEgrClp0DiscCells,
caviEgrClp1DiscCells,
caviEgrXmtClp0Cells,
caviEgrXmtClp1Cells,
caviEgrRcvOAMCells,
caviEgrRMCells,
caviEgrXmtEFCICells,
caviEgrRcvEFCICells,
caviEgrXmtOAMCells
}
STATUS deprecated -- replaced by caviEgressStatMIBGroup1
DESCRIPTION
"These are objects related to the ATM virtual interface statistics
group caviStatistics."
::= { caviMIBGroups 2}
caviEgressHighSpeedStatMIBGroup OBJECT-GROUP
OBJECTS {
caviHEgrXmtClp0Cells,
caviHEgrXmtClp1Cells
}
STATUS deprecated -- replaced by
-- caviEgressHighSpeedStatMIBGroup1
DESCRIPTION
"These statistics apply to ingress ATM virtual interfaces with speed of
OC12 or higher."
::= { caviMIBGroups 3}
caviEgressIntervalMIBGroup OBJECT-GROUP
OBJECTS {
caviEgressIntervalNumber,
caviIntEgrRcvClp0Cells,
caviIntEgrRcvClp1Cells,
caviIntEgrClp0DiscCells,
caviIntEgrClp1DiscCells,
caviIntEgrXmtClp0Cells,
caviIntEgrXmtClp1Cells,
caviIntEgrRcvOAMCells,
caviIntEgrRMCells,
caviIntEgrXmtEFCICells,
caviIntEgrRcvEFCICells,
caviIntEgrXmtOAMCells
}
STATUS deprecated -- relaced by caviEgressIntervalMIBGroup1
DESCRIPTION
"These are objects related to the ATM virtual interface
interval statistics group."
::= { caviMIBGroups 4}
caviIngressStatMIBGroup OBJECT-GROUP
OBJECTS {
caviIngRcvClp0Cells,
caviIngRcvClp1Cells,
caviIngClp0DiscCells,
caviIngClp1DiscCells,
caviIngXmtClp0Cells,
caviIngXmtClp1Cells,
caviIngRcvOAMCells,
caviIngRMCells,
caviIngXmtEFCICells,
caviIngRcvEFCICells,
caviIngXmtOAMCells
}
STATUS deprecated -- replaced by caviIngressStatMIBGroup1
DESCRIPTION
"These are objects related to the ingress ATM virtual
interface statistics."
::= { caviMIBGroups 5}
caviIngressHighSpeedStatMIBGroup OBJECT-GROUP
OBJECTS {
caviHIngRcvClp0Cells,
caviHIngRcvClp1Cells
}
STATUS deprecated -- replaced by caviIngHighSpeedStatMIBGroup1
DESCRIPTION
"These statistics apply to ingress ATM virtual interfaces with speed of
OC12 or higher."
::= { caviMIBGroups 6}
caviMIBGroupRev1 OBJECT-GROUP
OBJECTS {
caviPhyIfIndex,
caviViIfIndex,
caviMinRate,
caviMaxRate,
caviFileId,
caviIfType,
caviVpiNum,
caviRowStatus,
caviMinVpiNum,
caviMaxVpiNum
}
STATUS current
DESCRIPTION
"Definition of additional objects caviMinVpiNum and caviMaxVpiNum,
which are required to support the evuni and evnni functionality."
::= { caviMIBGroups 7}
caviEgressStatMIBGroup1 OBJECT-GROUP
OBJECTS {
caviEgrRcvClp0Cells,
caviEgrRcvClp1Cells,
caviEgrClp0DiscCells,
caviEgrClp1DiscCells,
caviEgrXmtClp0Cells,
caviEgrXmtClp1Cells,
caviEgrRcvOAMCells,
caviEgrRMCells,
caviEgrXmtEFCICells,
caviEgrRcvEFCICells,
caviEgrXmtOAMCells,
caviHighEgrRcvClp0Cells,
caviHighEgrRcvClp1Cells,
caviHighEgrClp0DiscCells,
caviHighEgrClp1DiscCells,
caviHighEgrXmtClp0Cells,
caviHighEgrXmtClp1Cells
}
STATUS current
DESCRIPTION
"These are objects related to the ATM virtual interface
statistics group caviStatistics."
::= { caviMIBGroups 8}
caviEgressHighSpeedStatMIBGroup1 OBJECT-GROUP
OBJECTS {
caviHEgrXmtClp0Cells,
caviHEgrXmtClp1Cells,
caviHEgrRcvClp0Cells,
caviHEgrRcvClp1Cells,
caviHEgrClp0DiscCells,
caviHEgrClp1DiscCells,
caviHIntEgrRcvClp0Cells,
caviHIntEgrRcvClp1Cells,
caviHIntEgrClp0DiscCells,
caviHIntEgrClp1DiscCells,
caviHIntEgrXmtClp0Cells,
caviHIntEgrXmtClp1Cells
}
STATUS current
DESCRIPTION
"These statistics apply to ingress ATM virtual interfaces
with speed of OC12 or higher."
::= { caviMIBGroups 9}
caviEgressIntervalMIBGroup1 OBJECT-GROUP
OBJECTS {
caviEgressIntervalNumber,
caviIntEgrRcvClp0Cells,
caviIntEgrRcvClp1Cells,
caviIntEgrClp0DiscCells,
caviIntEgrClp1DiscCells,
caviIntEgrXmtClp0Cells,
caviIntEgrXmtClp1Cells,
caviIntEgrRcvOAMCells,
caviIntEgrRMCells,
caviIntEgrXmtEFCICells,
caviIntEgrRcvEFCICells,
caviIntEgrXmtOAMCells,
caviHighIntEgrRcvClp0Cells,
caviHighIntEgrRcvClp1Cells,
caviHighIntEgrClp0DiscCells,
caviHighIntEgrClp1DiscCells,
caviHighIntEgrXmtClp0Cells,
caviHighIntEgrXmtClp1Cells
}
STATUS current
DESCRIPTION
"These are objects related to the ATM virtual interface
interval statistics group."
::= { caviMIBGroups 10}
caviIngressStatMIBGroup1 OBJECT-GROUP
OBJECTS {
caviIngRcvClp0Cells,
caviIngRcvClp1Cells,
caviIngClp0DiscCells,
caviIngClp1DiscCells,
caviIngXmtClp0Cells,
caviIngXmtClp1Cells,
caviIngRcvOAMCells,
caviIngRMCells,
caviIngXmtEFCICells,
caviIngRcvEFCICells,
caviIngXmtOAMCells,
caviHighIngRcvClp0Cells,
caviHighIngRcvClp1Cells,
caviHighIngClp0DiscCells,
caviHighIngClp1DiscCells,
caviHighIngXmtClp0Cells,
caviHighIngXmtClp1Cells
}
STATUS current
DESCRIPTION
"These are objects related to the ingress ATM virtual
interface statistics."
::= { caviMIBGroups 11}
caviIngHighSpeedStatMIBGroup1 OBJECT-GROUP
OBJECTS {
caviHIngRcvClp0Cells,
caviHIngRcvClp1Cells,
caviHIngClp0DiscCells,
caviHIngClp1DiscCells,
caviHIngXmtClp0Cells,
caviHIngXmtClp1Cells
}
STATUS deprecated -- replaced by caviIngHighSpeedStatMIBGroup2
DESCRIPTION
"These statistics apply to ingress ATM virtual interfaces
with speed of OC12 or higher."
::= { caviMIBGroups 12}
caviIngressIntervalStatMIBGroup OBJECT-GROUP
OBJECTS {
caviIntIngRcvClp0Cells,
caviIntIngRcvClp1Cells,
caviIntIngClp0DiscCells,
caviIntIngClp1DiscCells,
caviIntIngXmtClp0Cells,
caviIntIngXmtClp1Cells,
caviIntIngRcvOAMCells,
caviIntIngRMCells,
caviIntIngXmtEFCICells,
caviIntIngRcvEFCICells,
caviIntIngXmtOAMCells
}
STATUS current
DESCRIPTION
"These are objects related to the ingress ATM virtual
interface statistics."
::= { caviMIBGroups 13}
caviIngHighSpeedStatMIBGroup2 OBJECT-GROUP
OBJECTS {
caviHighIntIngRcvClp0Cells,
caviHighIntIngRcvClp1Cells,
caviHighIntIngClp0DiscCells,
caviHighIntIngClp1DiscCells,
caviHighIntIngXmtClp0Cells,
caviHighIntIngXmtClp1Cells,
caviHIngRcvClp0Cells,
caviHIngRcvClp1Cells,
caviHIngClp0DiscCells,
caviHIngClp1DiscCells,
caviHIngXmtClp0Cells,
caviHIngXmtClp1Cells,
caviHIntIngRcvClp0Cells,
caviHIntIngRcvClp1Cells,
caviHIntIngClp0DiscCells,
caviHIntIngClp1DiscCells,
caviHIntIngXmtClp0Cells,
caviHIntIngXmtClp1Cells
}
STATUS current
DESCRIPTION
"These statistics apply to ingress ATM virtual interfaces
with speed of OC12 or higher."
::= { caviMIBGroups 14}
END
Reference in New Issue View Git Blame Copy Permalink