mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
342 lines
11 KiB
Plaintext
342 lines
11 KiB
Plaintext
-- *****************************************************************
|
|
-- C I S C O A T M Traffic Parameter Extensions
|
|
--
|
|
-- December 1995, Michael Grobelch
|
|
--
|
|
-- Copyright (c) 1996-1997, 2001 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
CISCO-ATM-TRAFFIC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
atmTrafficDescrParamEntry FROM ATM-MIB -- RFC 1695
|
|
ciscoExperiment FROM CISCO-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
|
|
|
ciscoAtmTrafficExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200208260000Z"
|
|
ORGANIZATION "Cisco System Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-atm@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module is an extension to traffic OIDs
|
|
and variables defined in rfc1695."
|
|
REVISION "200208260000Z"
|
|
DESCRIPTION
|
|
"Deprecated atmNoClpNoScrCdvt as a similar object
|
|
atmNoClpNoScrCdvt defined in RFC-2514 can be used instead."
|
|
REVISION "200111010000Z"
|
|
DESCRIPTION
|
|
"Added an object to identify the traffic descriptor by a
|
|
name in human readable form."
|
|
REVISION "9705290000Z"
|
|
DESCRIPTION
|
|
"Added traffic for types dual-leaky bucket and mcr support
|
|
made possible on the LS1010 by the Feature Card Per Flow
|
|
Queueing support for per-VC queueing hardware structures."
|
|
::= { ciscoExperiment 11 }
|
|
|
|
ciscoAtmTrafficExtMIBObjects OBJECT IDENTIFIER ::=
|
|
{ ciscoAtmTrafficExtMIB 1 }
|
|
|
|
-- This MIB defines a two Groups:
|
|
--
|
|
-- 1. the ATM Traffic Type Extension Group, extending the
|
|
-- RFC 1695 mib Traffic Types.
|
|
-- 2. the ATM Traffic Descriptor Parameter Table Extension Group,
|
|
-- extending the RFC 1695 mib Traffic Table.
|
|
|
|
ciscoAtmTrafficTypeExt OBJECT IDENTIFIER ::=
|
|
{ ciscoAtmTrafficExtMIBObjects 1 }
|
|
ciscoAtmTrafficTableExt OBJECT IDENTIFIER ::=
|
|
{ ciscoAtmTrafficExtMIBObjects 2 }
|
|
|
|
--
|
|
-- The ATM Traffic Type Extension Group
|
|
--
|
|
|
|
atmNoClpNoScrCdvt OBJECT-IDENTITY
|
|
STATUS deprecated -- superceded by atmNoClpNoScrCdvt
|
|
-- OID in RFC 2514.
|
|
DESCRIPTION
|
|
"Specifies peak cell rate for CLP, and
|
|
cell delay variation tolerance:
|
|
Parameter 1: CLP=0+1 peak cell rate in
|
|
cells per second
|
|
Parameter 2: CDVT in cell-times
|
|
Parameter 3: not used
|
|
Parameter 4: not used
|
|
Parameter 5: not used.
|
|
This traffic descriptor is for cbr, abr
|
|
or ubr service categories, desiring to
|
|
specify the cdvt as well as pcr."
|
|
::= { ciscoAtmTrafficTypeExt 1 }
|
|
|
|
atmClpScrMbsCdvt OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This traffic descriptor is for Peak
|
|
Cell Rate (PCR), Sustained Cell Rate (SCR),
|
|
Maximum Burst Size applied to SCR,
|
|
and Cell Delay Variation Tolerance
|
|
applied to PCR.
|
|
The use of the parameter vector for this type:
|
|
Parameter 1: CLP=0+1 peak cell rate in
|
|
cells per second
|
|
Parameter 2: CLP=0 sustained cell rate in
|
|
cells per second.
|
|
Parameter 3: maximum burst size in cells
|
|
Parameter 4: CDVT in cell-times
|
|
Parameter 5: not used."
|
|
::= { ciscoAtmTrafficTypeExt 2 }
|
|
|
|
atmNoClpScrMbsCdvt OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This traffic descriptor is for Peak
|
|
Cell Rate (PCR), Sustained Cell Rate (SCR),
|
|
Maximum Burst Size applied to SCR,
|
|
and Cell Delay Variation Tolerance
|
|
applied to PCR.
|
|
The use of the parameter vector for this type:
|
|
Parameter 1: CLP=0+1 peak cell rate in
|
|
cells per second
|
|
Parameter 2: CLP=0+1 sustained cell rate in
|
|
cells per second.
|
|
Parameter 3: maximum burst size in cells
|
|
Parameter 4: CDVT in cell-times
|
|
Parameter 5: not used."
|
|
::= { ciscoAtmTrafficTypeExt 3 }
|
|
|
|
atmNoClpMcr OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This traffic descriptor is for Peak
|
|
Cell Rate (PCR) and Minimum Cell Rate
|
|
(MCR).
|
|
The use of the parameter vector for this type:
|
|
Parameter 1: CLP=0+1 peak cell rate in
|
|
cells per second
|
|
Parameter 2: CLP=0+1 minimum cell rate in
|
|
cells per second.
|
|
Parameter 3: not used.
|
|
Parameter 4: not used.
|
|
Parameter 5: not used."
|
|
::= { ciscoAtmTrafficTypeExt 4 }
|
|
|
|
atmNoClpMcrCdvt OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This traffic descriptor is for Peak
|
|
Cell Rate (PCR), Minimum Cell Rate (MCR),
|
|
and Cell Delay Variation Tolerance
|
|
applied to PCR.
|
|
The use of the parameter vector for this type:
|
|
Parameter 1: CLP=0+1 peak cell rate in
|
|
cells per second
|
|
Parameter 2: CDVT in cell-times
|
|
Parameter 3: CLP=0+1 minimum cell rate in
|
|
cells per second.
|
|
Parameter 4: not used.
|
|
Parameter 5: not used."
|
|
::= { ciscoAtmTrafficTypeExt 5 }
|
|
|
|
--
|
|
-- The ATM Traffic Descriptor Parameter Table Extension Group
|
|
--
|
|
|
|
atmTrafficDescrParamExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmTrafficDescrParamExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide additional information specifying traffic parameters
|
|
for a VC/VP."
|
|
::= { ciscoAtmTrafficTableExt 1 }
|
|
|
|
atmTrafficDescrParamExtEntry OBJECT-TYPE
|
|
SYNTAX AtmTrafficDescrParamExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the Traffic Parameter Descriptor extension
|
|
table."
|
|
AUGMENTS { atmTrafficDescrParamEntry }
|
|
::= { atmTrafficDescrParamExtTable 1 }
|
|
|
|
AtmTrafficDescrParamExtEntry ::=
|
|
SEQUENCE {
|
|
atmTrafficExplicitServCategory INTEGER,
|
|
atmTrafficDerivedServCategory INTEGER,
|
|
atmTrafficDescriptorName SnmpAdminString
|
|
}
|
|
|
|
atmTrafficExplicitServCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cbr (1),
|
|
vbrRt (2),
|
|
vbrNrt (3),
|
|
abr (4),
|
|
ubr (5),
|
|
notDef (6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects indicates the Service Category
|
|
specified by the Traffic Descriptor.
|
|
If it is defined, the setting of this
|
|
object determines the Service Category used
|
|
for the connection. This then limits the
|
|
possible Traffic Descriptor Types as follows:
|
|
|
|
Explicit
|
|
Service
|
|
Category Type may only be
|
|
-----------------------------------------
|
|
cbr atmNoClpNoScr.
|
|
atmClpNoTaggingNoScr
|
|
atmClpTaggingNoScr
|
|
atmNoClpNoScrCdvt
|
|
|
|
abr/ubr atmNoTrafficDescriptor
|
|
atmNoClpNoScr.
|
|
atmNoClpNoScrCdvt
|
|
atmNoClpMcr -- ubr+/abr
|
|
atmNoClpMcrCdvt -- ubr+/abr
|
|
|
|
vbr atmNoClpScr
|
|
atmClpNoTaggingScr
|
|
atmClpTaggingScr
|
|
atmClpScrMbsCdvt
|
|
atmNoClpScrMbsCdvt
|
|
-----------------------------------------
|
|
If the settings of Service Category and Traffic
|
|
Descriptor Type are not compatible, the row can
|
|
not be made active."
|
|
DEFVAL { notDef }
|
|
::= { atmTrafficDescrParamExtEntry 1 }
|
|
|
|
atmTrafficDerivedServCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cbr (1),
|
|
vbrRt (2),
|
|
vbrNrt (3),
|
|
abr (4),
|
|
ubr (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Service Category
|
|
derived from the Traffic Descriptor. If the
|
|
object atmTrafficExplicitServCategory has
|
|
a defined value, then this object mirrors
|
|
that value. If Explicit Service Category
|
|
has the value notDef, then this object
|
|
reflects the Service Category derived from
|
|
the Traffic Descriptor Type as follows:
|
|
|
|
Traffic Descriptor Service
|
|
Type Category
|
|
-----------------------------------------
|
|
atmNoTrafficDescriptor ubr
|
|
|
|
atmNoClpMcr abr
|
|
atmNoClpMcrCdvt abr
|
|
|
|
atmNoClpNoScr --|
|
|
atmClpNoTaggingNoScr |-- cbr
|
|
atmClpTaggingNoScr |
|
|
atmNoClpNoScrCdvt --|
|
|
|
|
atmNoClpScr --|
|
|
atmClpNoTaggingScr |-- vbr-rt
|
|
atmClpScrMbsCdvt |
|
|
atmNoClpScrMbsCdvt |
|
|
atmClpTaggingScr --|
|
|
-----------------------------------------"
|
|
::= { atmTrafficDescrParamExtEntry 2 }
|
|
|
|
atmTrafficDescriptorName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A human readable string that contains the unique name
|
|
of this Traffic Descriptor.
|
|
This object will return a zero-length string if value is
|
|
not set."
|
|
DEFVAL { "" }
|
|
::= { atmTrafficDescrParamExtEntry 3 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
ciscoAtmTrafficExtMIBConformance
|
|
OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIB 3 }
|
|
ciscoAtmTrafficExtMIBCompliances
|
|
OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBConformance 1 }
|
|
ciscoAtmTrafficExtMIBGroups
|
|
OBJECT IDENTIFIER ::= { ciscoAtmTrafficExtMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ciscoAtmTrafficExtMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the Cisco ATM Traffic Extension MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ciscoAtmTrafficTableExtMIBGroup }
|
|
::= { ciscoAtmTrafficExtMIBCompliances 1 }
|
|
|
|
ciscoAtmTrafficExtMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the Cisco ATM Traffic Extension MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ciscoAtmTrafficTableExtMIBGroup }
|
|
|
|
GROUP ciscoAtmTrafficNmsGroup
|
|
DESCRIPTION
|
|
"This group is optional."
|
|
::= { ciscoAtmTrafficExtMIBCompliances 2 }
|
|
|
|
-- units of conformance
|
|
|
|
ciscoAtmTrafficTableExtMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
atmTrafficExplicitServCategory,
|
|
atmTrafficDerivedServCategory
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects which provide extensions to the
|
|
ATM Traffic Parameter Descriptor Table."
|
|
::= { ciscoAtmTrafficExtMIBGroups 1 }
|
|
|
|
ciscoAtmTrafficNmsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
atmTrafficDescriptorName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects which provide additional
|
|
information for a management system."
|
|
::= { ciscoAtmTrafficExtMIBGroups 2 }
|
|
|
|
END
|