MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ATM-SIG-DIAG-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

876 lines
33 KiB
Plaintext
Raw Blame History

--------------------------------------------------------------------
-- CISCO ATM signalling diagnostics MIB
--
-- July 1997, Karthik Ramachandran
--
-- Copyright (c) 1997-1999 by cisco Systems, Inc.
-- All rights reserved.
-------------------------------------------------------------------
CISCO-ATM-SIG-DIAG-MIB DEFINITIONS ::=BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
PnniNodeId, PnniPortId, ServiceCategory
FROM PNNI-MIB
InterfaceIndexOrZero
FROM CISCO-TC;
ciscoAtmSigDiagMIB MODULE-IDENTITY
LAST-UPDATED "9707280000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 250 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"The MIB module to facilitate the diagnosis of
failures of ATM Signalling requests. Through
this MIB, an ATM device retains information for
one, or possibly more, connection setup failure
records. Each record stores information about
those connection setup failures which match a set
of selection criteria, such as particular Calling
or Called ATM Addresses."
REVISION "9707280000Z"
DESCRIPTION
"Initial version of the MIB for diagnosis of
failures of ATM signalling requests."
::= { ciscoMgmt 78 }
ciscoSigFailMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmSigDiagMIB 1 }
-- AtmAddr defined here for completeness. Over time it should be
-- imported from the ATM-TC-MIB under development by the IETF
AtmAddr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"The ATM address used by the network entity.
The address types are: no address (0 octets),
E.164 (8 octets), and NSAP (20 octets).
Note: The E.164 address is encoded in BCD
format."
SYNTAX OCTET STRING (SIZE(0|8|20))
csfBaseGroup OBJECT IDENTIFIER ::= {ciscoSigFailMIBObjects 1}
csfFilterControl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables the call failure filtering
feature in the ATM device. When this object is modified from
'enable' to 'disable' the records in the csfRecordTable
are not removed but filtering is stopped in the device."
DEFVAL {disable}
::= { csfBaseGroup 1 }
csfFilterGroup OBJECT IDENTIFIER ::= {ciscoSigFailMIBObjects 2}
csfFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsfFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table whose entries describe the filtering criteria
for recording failed connection setup requests."
::= { csfFilterGroup 1 }
csfFilterEntry OBJECT-TYPE
SYNTAX CsfFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entry's criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices."
INDEX { csfFilterIndex }
::= { csfFilterTable 1 }
CsfFilterEntry ::= SEQUENCE
{
csfFilterIndex Integer32,
csfFilterScope INTEGER,
csfFilterConnKind OCTET STRING,
csfFilterConnCastType OCTET STRING,
csfFilterServiceCategory OCTET STRING,
csfFilterInInterface InterfaceIndexOrZero,
csfFilterOutInterface InterfaceIndexOrZero,
csfFilterCause Integer32,
csfFilterCallingParty AtmAddr,
csfFilterCallingPartyMask OCTET STRING,
csfFilterCalledParty AtmAddr,
csfFilterCalledPartyMask OCTET STRING,
csfFilterMaxRecords Integer32,
csfFilterAgeTimeout Integer32,
csfFilterPurge INTEGER,
csfFilterNumMatches Counter32,
csfFilterRowStatus RowStatus
}
csfFilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer uniquely identifying a filtering
criteria."
::= { csfFilterEntry 1 }
csfFilterScope OBJECT-TYPE
SYNTAX INTEGER {
localRejects(1),
remoteRejects(2),
allRejects(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter to calls which
where rejected either within the system in which the filtering
is in progress or to calls which were rejected on external
ATM devices but transited through the device in which filtering
is in progress."
DEFVAL { allRejects }
::= { csfFilterEntry 2 }
csfFilterConnKind OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables the user to track failures of soft
permanent virtual channel connections, soft permanent virtual
path connections, switched virtual channel connections, and/or
switched virtual path connections."
::= { csfFilterEntry 3 }
csfFilterConnCastType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter based on the
type of topology of connections (point-to-point or
point-to-multipoint). "
::= { csfFilterEntry 4 }
csfFilterServiceCategory OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter to calls
belonging to service categories represented by this object. "
::= { csfFilterEntry 5 }
csfFilterInInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter to calls which
entered the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM Interface.
The value zero indicates that the scope of the filter is not
restricted by the incoming port. "
DEFVAL { 0 }
::= { csfFilterEntry 6 }
csfFilterOutInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter to calls which
exited the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM Interface.
The value zero indicates that the scope of the filter is not
restricted by the outgoing port. To track calls failed locally
in the ATM device in which the call failure tracking is in
progress ,the csfFilterScope object should be used , in which
case the value of this object need not be changed from its
default value. "
DEFVAL { 0 }
::= { csfFilterEntry 7 }
csfFilterCause OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object restricts the scope of the filter to calls which
were cleared with the cause code represented by this object.
The values are the same as the clear code values mentioned
in the ATM forum UNI specifications.The value zero indicates
that the scope of the filter is not restricted by the cause
code value."
REFERENCE
"ATM Forum's UNI3.0/3.1 Specification. "
DEFVAL { 0 }
::= { csfFilterEntry 8 }
csfFilterCallingParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of this object and the corresponding instance
of csfFilterCallingPartyMask is one selection criteria
for this record. To match this selection criteria, a failed
connection setup must have a Calling Party Address which has
the same length as, and is equal in value to
csfFilterCallingParty for all bits that are 1 in the
value of csfFilterCallingPartyMask. When the default
value for the object is retained then the rejected call will
match this filtering criteria for any calling address in the
rejected call. "
DEFVAL { "" }
::= { csfFilterEntry 9 }
csfFilterCallingPartyMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of this object and the corresponding
instance of csfFilterCallingParty is one selection
criteria for this record. To match this selection criteria,
a failed connection setup must have a Calling Party Address
which equals the value of csfFilterCallingParty for
all bit positions identified by the value of
csfFilterCallingPartyMask. If the mask value is
shorter than the length of csfFilterCallingParty,
then it is extended with zero bits to be the required length.
If the default value for this object is retained then the
rejected call will match this filtering criterion if and
only if the calling address in the call matches the
csfFilterCallingParty for this entry. "
DEFVAL {""}
::= { csfFilterEntry 10 }
csfFilterCalledParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of this object and the corresponding instance
of csfFilterCalledPartyMask is one selection criteria
for this record. To match this selection criteria, a failed
connection setup must have a called party address which has
the same length as, and is equal in value to
csfFilterCalledParty for all bits that are 1 in the value of
csfFilterCalledPartyMask. When the default value for the
object is retained then the rejected call will match this
filtering criteria for any called address in the call. "
DEFVAL {""}
::= { csfFilterEntry 11 }
csfFilterCalledPartyMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of this object and the corresponding instance of
csfFilterCalledParty is one selection criteria for this
record. To match this selection criteria, a failed connection
setup must have a Calling Party Address which equals the value
of csfFilterCalledParty for all bit positions identified
by the value of csfFilterCalledPartyMask. If the mask
value is shorter than the length of csfFilterCalledParty,
then it is extended with zero bits to be the required length. If
the default value for this object is retained then the rejected
call will match this filtering criterion if and only if the
calling address in the call matches the
csfFilterCallingParty for this entry. "
DEFVAL {""}
::= { csfFilterEntry 12 }
csfFilterMaxRecords OBJECT-TYPE
SYNTAX Integer32 (-1..214783647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries that are desired in the
csfRecordTable on behalf of this entry. The agent will not create
more than this number of entries in the table,but may choose
to create fewer entries in the csfRecordTable for any reason
including the lack of resources. The agent will however
dedicate resources for a minimum number of entries in the
csfRecordTable ,to take care of temporary memory allocation
failures in the system. In case of memory allocation failures
the agent will utilize these dedicated resources for the
creation of the new entries. If memory resource failures
continue and the dedicated resources are exhausted then
the records in the csfRecordTable are pruned such that the
oldest entries are removed to make way for the new entries.
A value '-1' will indicate no upper limit for the number of
records stored. The manager can set this object to -1 if
overwriting of records is not desired. The new value for
this object will take effect immediately.
If this object is set to a value less than the number of entries
thats currently present in the csfRecordTable corresponding to
this entry, then the oldest entries in the csfRecordTable will be
deleted so that their number equals the new value of this object.
If the value of this object is changed from -1 to any other
positive value then the entries will be pruned such that only the
first n records collected for this entry are retained in the
csfRecordTable, n being the new value of this object. "
DEFVAL { 20 }
::= { csfFilterEntry 13 }
csfFilterAgeTimeout OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds left for this entry to age out.
On expiry of this timer filtering is disabled for this entry.
The display records in the csfRecordTable corresponding
to this entry are retained. When the timer expires the object
will have a value zero. The management station can restart
filtering for this entry by setting this object to a positive value.
When the object is set to zero, filtering is stopped for this
entry. When the management station modifies this object ,
the currently running timer,if any, is aborted and a timer is
started with the new value of this object. The value '-1' will
indicate an infinite timeout value. "
DEFVAL { 600 }
::= { csfFilterEntry 14 }
csfFilterPurge OBJECT-TYPE
SYNTAX INTEGER {
purge(1),
noop(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object provides a facility for the user to purge the records
in the csfRecordTable corresponding to this entry. When
the value is set to 'purge', the records in the
csfRecordTable corresponding to this entry are purged.
When the value is set to 'noop' no operation is performed. When
read, the value 'noop' is returned."
DEFVAL { noop }
::= { csfFilterEntry 15 }
csfFilterNumMatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A monotonically increasing counter to keep track of the
number of call failures that matched this entry for
the entire lifetime of this entry. "
::= { csfFilterEntry 16 }
csfFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of this row. Used according to the row
installation and removal conventions. This object can be used
to temporarily inactivate an entry in the table. When this object
is set to a value 'notInService' filtering is stopped for the
corresponding row. Any records that have been stored in the
csfRecordTable corresponding to this entry will not be
released. Any writeable objects in the row can be modified when
the row is active. All values will take effect immediately."
::= { csfFilterEntry 17 }
csfRecordGroup OBJECT IDENTIFIER ::= {ciscoSigFailMIBObjects 3}
csfRecordTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsfRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table in which the failures of ATM Signalling connection
setup requests are recorded."
::= { csfRecordGroup 1 }
csfRecordEntry OBJECT-TYPE
SYNTAX CsfRecordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing one connection setup request failure
record. The csfRecordFilterIndex represents the
index into the csfFilterTable whose entry is the
filtering criteria applied against all connection setup
failures generated/detected at this ATM device. Only connection
setup failures which match against all of the filtering
entry's criteria are recorded in the table. There could be
multiple entries for each filtering criteria. The
csfFilterMaxRecords indicates the number of records to
be stored for the corresponding csfFilterTable entry."
INDEX { csfFilterIndex, csfRecordIndex }
::= { csfRecordTable 1 }
CsfRecordEntry ::=
SEQUENCE {
csfRecordIndex Integer32,
csfRecordScope INTEGER,
csfRecordConnKind INTEGER,
csfRecordConnCastType INTEGER,
csfRecordConnIndicator INTEGER,
csfRecordServiceCategory ServiceCategory,
csfRecordInInterface Integer32,
csfRecordOutInterface InterfaceIndexOrZero,
csfRecordCause Integer32,
csfRecordDiags OCTET STRING,
csfRecordCallingParty AtmAddr,
csfRecordCallingPartySubAddress AtmAddr,
csfRecordCalledParty AtmAddr,
csfRecordCalledPartySubAddress AtmAddr,
csfRecordCrankBackTransitType INTEGER,
csfRecordCrankBackNodeId PnniNodeId,
csfRecordCrankBackPortId PnniPortId,
csfRecordCrankBackSucceedingNodeId PnniNodeId,
csfRecordTimeStamp TimeStamp
}
csfRecordIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer used to distinguish between multiple
records for the same filtering criteria. "
::= { csfRecordEntry 1 }
csfRecordScope OBJECT-TYPE
SYNTAX INTEGER {
localReject(1),
remoteReject(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the location of the call failure."
::= { csfRecordEntry 2 }
csfRecordConnKind OBJECT-TYPE
SYNTAX INTEGER {
softPvcc(1),
softPvpc(2),
switchedVcc(3),
switchedVpc(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the use of call control of the
rejected connection. "
::= { csfRecordEntry 3 }
csfRecordConnCastType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
p2mp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the type of topology of the
rejected call (point-to-point or point-to-multipoint)."
::= { csfRecordEntry 4 }
csfRecordConnIndicator OBJECT-TYPE
SYNTAX INTEGER {
addPartyReject(1),
setupReject(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this record was created due to an add
party failure or a setup failure. "
::= { csfRecordEntry 5 }
csfRecordServiceCategory OBJECT-TYPE
SYNTAX ServiceCategory
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the service category used by the call. "
::= { csfRecordEntry 6 }
csfRecordInInterface OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex of the incoming port on which this call was received
by the ATM device."
::= { csfRecordEntry 7 }
csfRecordOutInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex of the outgoing port ,if available, through which
this call was routed to the network. The distinguished value zero
indicates that the call was rejected before any outgoing
interface was chosen."
::= { csfRecordEntry 8 }
csfRecordCause OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the reason for the call failure. When
a PNNI Crankback information element is included in the call
clearing message, this object contains the crankback cause.
In all other cases, the values are the same as the cause code
values defined for the Cause information element."
REFERENCE
"ATM Forum's UNI3.0/3.1 Specification. "
::= { csfRecordEntry 9 }
csfRecordDiags OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the contents of the diagnostics fields
from the Cause information element. When the value of
csfRecordCause is 49,'Quality of Service unavailable',
the diagnostics are taken from the PNNI Crankback information
element instead of the cause information element."
REFERENCE
"ATM Forum's UNI3.0/3.1 Specification. "
::= { csfRecordEntry 10 }
csfRecordCallingParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ATM adddress of the calling party in the
rejected call."
::= { csfRecordEntry 11 }
csfRecordCallingPartySubAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ATM sub-adddress of the calling party in the
rejected call. The presence of a sub address is not mandatory.
If the calling sub-addresses is not present in the call then
this object will have a null value."
::= { csfRecordEntry 12 }
csfRecordCalledParty OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ATM address of the called party in the
rejected call. "
::= { csfRecordEntry 13 }
csfRecordCalledPartySubAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ATM sub-adddress of the called party in the
rejected call. The presence of a sub address is not mandatory.
If the called sub-address is not present in the call then
this object will have a null value."
::= { csfRecordEntry 14 }
csfRecordCrankBackTransitType OBJECT-TYPE
SYNTAX INTEGER {
blockedIncomingPort(1),
blockedNode(2),
blockedLink(3),
noCrankBack(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of blockage in case of
a blocked call. This object has a value 'noCrankBack' if the
call was cleared without a crankback information element."
::= { csfRecordEntry 15 }
csfRecordCrankBackNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object depends on the csfRecordCrankBackTransitType
object. When that object value is 'blockedNode',
csfRecordCrankBackNodeId indicates the node ID of
the blocked node. When the csfRecordCrankBackTransitType
object value is 'blockedLink', this object indicates the
node ID of the logical node preceding the link at which
the call/connection was blocked. When the
csfRecordCrankBackTransitType object value is
'blockedIncomingPort' or 'noCrankBack', this object is
set to null."
::= { csfRecordEntry 16 }
csfRecordCrankBackPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the csfRecordCrankBackTransitType object value
is 'blockedLink', this object identifies a logical port of the
blocked link's preceeding node identifier. The distinguished
value zero indicates that no port is specified. For all values
of csfRecordCrankBackTransitType other than 'blockedLink',
this object is set to zero."
::= { csfRecordEntry 17 }
csfRecordCrankBackSucceedingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object depends on the csfRecordCrankBackTransitType
object. If the csfRecordCrankBackNodeId object value
is 'blockedLink' then the value of this object will identify
the logical node succeeding a link at which the call/connection
was blocked. This object does not have a meaning if the call
is cleared without a crankback information element and thus
set to null. "
::= { csfRecordEntry 18 }
csfRecordTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which this record entry was created."
::= { csfRecordEntry 19 }
csfDtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CsfDtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table in which the Designated Transit List (DTL)stacks
(i.e., source routes) of failed calls are recorded. Each DTL
identifies a source route through a single peer group.
DTL's are represented as a series of logical Node IDs and
logical Port IDs."
::= { csfRecordGroup 2}
csfDtlEntry OBJECT-TYPE
SYNTAX CsfDtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A segment of the DTL stack. The complete DTL stack is formed
by traversing the rows of the table for which the csfFilterIndex
and csfRecordIndex are the same. Level transitions are indicated
using the csfDtlLinkType. Since the entries in the table are
linked to the entries of the csfFilterTable ,the entries are
added and removed from the table as and when the corresponding
entries in the csfFilterTable are added and removed."
INDEX { csfFilterIndex, csfRecordIndex,
csfDtlEntryIndex }
::= { csfDtlTable 1 }
CsfDtlEntry ::=
SEQUENCE {
csfDtlEntryIndex Integer32,
csfDtlNodeId PnniNodeId,
csfDtlPortId PnniPortId,
csfDtlLinkType INTEGER
}
csfDtlEntryIndex OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index in the current DTL stack of this entry. This
index represents the the order of this entry in the DTL
stack."
::= { csfDtlEntry 1 }
csfDtlNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each entry in the DTL table corresponds to a node/port tuple
based on which a source route through the peer group is built.
This object represents the node id in the tuple "
::= { csfDtlEntry 2 }
csfDtlPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each entry in the DTL table corresponds to a node/port tuple
based on which a source route through the peer group is built.
This object represents the port id in the tuple "
::= { csfDtlEntry 3 }
csfDtlLinkType OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
horizontal(2),
uplink(3),
last(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of link out from the node identified by csfDtlNodeId.
This is well defined even if the specific port is not specified.
A value 'horizontal' indicates a normal link within the containing
peer group. A value 'uplink' indicates a link going up a level.
A value 'last' indicates that this is the last entry in the DTL
stack. 'invalid' indicates an invalid link."
::= {csfDtlEntry 4 }
-- conformance information
ciscoSigFailMIBConformance
OBJECT IDENTIFIER ::= { ciscoAtmSigDiagMIB 3 }
ciscoSigFailMIBCompliances
OBJECT IDENTIFIER ::= { ciscoSigFailMIBConformance 1 }
ciscoSigFailMIBGroups
OBJECT IDENTIFIER ::= { ciscoSigFailMIBConformance 2 }
-- compliance statements
ciscoSigFailMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco ATM Signalling Diagnostic MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoSigFailGeneralGroup, ciscoSigFailMIBGroup }
::= { ciscoSigFailMIBCompliances 1 }
-- units of conformance
ciscoSigFailGeneralGroup OBJECT-GROUP
OBJECTS {
csfFilterControl
}
STATUS current
DESCRIPTION
"A collection of objects which help in diagnosing ATM
signalling failures."
::= { ciscoSigFailMIBGroups 1 }
ciscoSigFailMIBGroup OBJECT-GROUP
OBJECTS {
csfFilterScope,
csfFilterConnKind,
csfFilterConnCastType,
csfFilterServiceCategory,
csfFilterInInterface ,
csfFilterOutInterface,
csfFilterCause,
csfFilterCallingParty,
csfFilterCallingPartyMask,
csfFilterCalledParty,
csfFilterCalledPartyMask,
csfFilterMaxRecords,
csfFilterAgeTimeout,
csfFilterPurge,
csfFilterNumMatches,
csfFilterRowStatus,
csfRecordScope,
csfRecordConnKind,
csfRecordConnCastType,
csfRecordConnIndicator,
csfRecordServiceCategory,
csfRecordInInterface,
csfRecordOutInterface,
csfRecordCause,
csfRecordDiags,
csfRecordCallingParty,
csfRecordCallingPartySubAddress,
csfRecordCalledParty,
csfRecordCalledPartySubAddress,
csfRecordCrankBackTransitType,
csfRecordCrankBackNodeId,
csfRecordCrankBackSucceedingNodeId,
csfRecordCrankBackPortId,
csfRecordTimeStamp,
csfDtlNodeId,
csfDtlPortId,
csfDtlLinkType
}
STATUS current
DESCRIPTION
"A collection of objects which help in diagnosing ATM
signalling failures."
::= { ciscoSigFailMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink