MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ATM-IF-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1261 lines
48 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- cisco extension to the Atom MIB Interface table.
--
-- January 1996, Kartik Chandrasekhar
--
-- Copyright (c) 1996-1997, 1998, 1999, 2000, 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-ATM-IF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
Counter32,
Gauge32,
Integer32,
NOTIFICATION-TYPE,
OBJECT-TYPE FROM SNMPv2-SMI
atmInterfaceConfEntry FROM ATM-MIB -- RFC 1695
TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
ciscoExperiment FROM CISCO-SMI;
ciscoAtmIfMIB MODULE-IDENTITY
LAST-UPDATED "200202130000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"A MIB module for an ATM interface configuration."
REVISION "200202130000Z"
DESCRIPTION
"Deprecated ciscoAtmIfSvcMinVci in favor of object
ciscoatmInterfaceConfMinSvccVcc with greater
capability in the CISCO-ATM2-MIB.
Added a notification object to send out a trap
when ILMI or SSCOP changes state. Also adding an
object to enable or disable this notification."
REVISION "200108080000Z"
DESCRIPTION
"Added enum aini for the object ciscoAtmIfType."
REVISION "200105210000Z"
DESCRIPTION
"Add new per-service category SVC UPC Intent objects
ciscoAtmIfSvcUpcIntentCbr, ciscoAtmIfSvcUpcIntentVbrRt,
ciscoAtmIfSvcUpcIntentVbrNrt, ciscoAtmIfSvcUpcIntentAbr,
ciscoAtmIfSvcUpcIntentUbr. Deprecate the old per-interface
SVC UPC intent object ciscoAtmIfSvcUpcIntent."
REVISION "200004110000Z"
DESCRIPTION
"Added
o A collection of objects that count UPC violations
and number of cells discarded due to various
conditions on ATM interfaces.
o Added ILMI state and SSCOP state monitoring
variables.
o Fixed the lines in DESCRIPTION section for
various objects that failed the line length check
by mib-police.
o Introduced a new Group object to obsolete
ciscoAtmIfMIBGroup3 as it contained objects with
incompatible status."
REVISION "9903110000Z"
DESCRIPTION
"Clarified the description of SVC UPC Intent object that
it is defined for logical ATM interfaces too."
REVISION "9711300000Z"
DESCRIPTION
"Added
ciscoAtmIfConfigAESA
ciscoAtmIfDerivedAESA
ciscoAtmIfE164Address
ciscoAtmIfE164AutoConversionOnly
objects."
REVISION "9709100000Z"
DESCRIPTION
"Updated description of ciscoAtmIfSignallingAdminStatus
object. Restriction that the object value be modified
only when the ifAdminStatus is down has been removed."
REVISION "9611010000Z"
DESCRIPTION
"Added Nsap Address and Well Known VC configuration
variables."
REVISION "9610140000Z"
DESCRIPTION
"Added SVC UPC intent configuration variable."
::= { ciscoExperiment 14 } -- assigned by cana@cisco.com
ciscoAtmIfMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmIfMIB 1 }
NsapAtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity. The
address types are NSAP (20 octets)."
SYNTAX OCTET STRING (SIZE(20))
-- temp: copied from the ATM-TC-MIB
AtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity. The
address types are: no address (0 octets), E.164 (8
octets), network prefix (13 octets), and NSAP (20
octets). Note: The E.164 address is encoded in
BCD format."
SYNTAX OCTET STRING (SIZE(0|8|13|20))
UpcMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention defining options for Usage Parameter
Control:
passing : take no action on cells considered to violate the
traffic contract.
tagging : set the CLP bit in the header of cells considered
to violate the traffic contract.
dropping: discard cells considered to violate the traffic
contract."
SYNTAX INTEGER {
passing(1),
tagging(2),
dropping(3)
}
-- This group is an ATM switch specific configuration
-- information
ciscoAtmIfIlmiAccessGlobalDefaultFilter OBJECT-TYPE
SYNTAX INTEGER {
permitAll(1),
permitPrefix(2),
permitPrefixAndWellknownGroups(3),
permitPrefixAndAllGroups(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global default access filter which set the per-switch
default access filter for ILMI address registration
on all interfaces.
permitAll - This permits all ILMI registered addresses.
permitPrefix - The address being registered by ILMI
should have their prefix portion of the address match
the ILMI prefixes used on this interface. If there
are any per-interface ILMI address prefixes
configured, then the prefixes derived from the
switch addresses are not considered ILMI prefixes for
this interface.
permitPrefixAndWellknownGroups - This is same as
'permitPrefix' but in addition it also allows the
well-known group addresses. The well-known group
addresses will be the old LECS address and any address
matching the ATM Forum address prefix for well known
addresses.
(i.e.,C5.0079.0000.0000.0000.0000.0000.00A03E)
permitPrefixAndAllGroups - This is same
as 'permitPrefix' but in addition it allows all
group addresses."
DEFVAL { permitAll }
::= { ciscoAtmIfMIBObjects 2 }
ciscoAtmIfNotifsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows enabling/disabling of notifications for ATM
Interface events"
DEFVAL { false }
::= { ciscoAtmIfMIBObjects 3 }
-- This group is an ATM interface specific configuration
-- information
ciscoAtmIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoAtmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ATM local interface configuration
parameters, one entry per ATM interface port."
::= { ciscoAtmIfMIBObjects 1 }
ciscoAtmIfEntry OBJECT-TYPE
SYNTAX CiscoAtmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This list conatins additonal ATM interface configuration
parameters and state variables."
AUGMENTS { atmInterfaceConfEntry }
::= { ciscoAtmIfTable 1 }
CiscoAtmIfEntry ::=
SEQUENCE {
ciscoAtmIfType INTEGER,
ciscoAtmIfSide INTEGER,
ciscoAtmIfUniType INTEGER,
ciscoAtmIfPVPs Integer32,
ciscoAtmIfPVCs Integer32,
ciscoAtmIfActiveSVPs Gauge32,
ciscoAtmIfActiveSVCs Gauge32,
ciscoAtmIfTotalConnections Gauge32,
ciscoAtmIfConfVplIf Integer32,
ciscoAtmIfPortType INTEGER,
ciscoAtmIfXmitLed INTEGER,
ciscoAtmIfRecvLed INTEGER,
ciscoAtmIfXmitCells Counter32,
ciscoAtmIfRecvCells Counter32,
ciscoAtmIfSvcMinVci INTEGER,
ciscoAtmIfIlmiConfiguration INTEGER,
ciscoAtmIfIlmiAddressRegistration INTEGER,
ciscoAtmIfIlmiAutoConfiguration INTEGER,
ciscoAtmIfIlmiKeepAlive Integer32,
ciscoAtmIfSoftVcDestAddress NsapAtmAddr,
ciscoAtmIfUniSignallingVersion INTEGER,
ciscoAtmIfSvcUpcIntent INTEGER,
ciscoAtmIfAddressType INTEGER,
ciscoAtmIfAddress OCTET STRING,
ciscoAtmIfWellKnownVcMode INTEGER,
ciscoAtmIfSignallingAdminStatus INTEGER,
ciscoAtmIfCdLed INTEGER,
ciscoAtmIfIlmiAccessFilter INTEGER,
ciscoAtmIfConfigAESA OCTET STRING,
ciscoAtmIfDerivedAESA AtmAddr,
ciscoAtmIfE164Address AtmAddr,
ciscoAtmIfE164AutoConversionOnly TruthValue,
ciscoAtmIfRxCellUpcViolations Counter32,
ciscoAtmIfRxCellDiscards Counter32,
ciscoAtmIfIlmiFSMState INTEGER,
ciscoAtmIfIlmiUpDownChanges Counter32,
ciscoAtmIfSscopFSMState INTEGER,
ciscoAtmIfSscopUpDownChanges Counter32,
ciscoAtmIfSvcUpcIntentCbr UpcMethod,
ciscoAtmIfSvcUpcIntentVbrRt UpcMethod,
ciscoAtmIfSvcUpcIntentVbrNrt UpcMethod,
ciscoAtmIfSvcUpcIntentAbr UpcMethod,
ciscoAtmIfSvcUpcIntentUbr UpcMethod
}
ciscoAtmIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
uni(2),
pnni(3),
iisp(4),
nniPvcOnly(5),
aini(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of ATM interface which is either a UNI
(User to Network), PNNI, IISP or NNI PVC only.
To modify the ciscoAtmIftype, ifAdminStatus has
to be down and atmIfIlmiAutoConfiguration disabled."
DEFVAL {uni}
::= { ciscoAtmIfEntry 1 }
ciscoAtmIfSide OBJECT-TYPE
SYNTAX INTEGER {
user(1),
network(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The side of ATM interface which is either a user or
network side.NotApplicable value implies that
ciscoAtmIftype is other than uni or iisp."
DEFVAL {network}
::= { ciscoAtmIfEntry 2 }
ciscoAtmIfUniType OBJECT-TYPE
SYNTAX INTEGER {
public(1),
private(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of User to Network interface is either
private or public. If ciscoAtmIfType is not uni
then ciscoAtmIfUniType value should be ignored."
DEFVAL {private}
::= { ciscoAtmIfEntry 3 }
ciscoAtmIfPVPs OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of permanent virtual paths at this
interface."
::= { ciscoAtmIfEntry 4 }
ciscoAtmIfPVCs OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of permanent virtual channels at this
interface."
::= { ciscoAtmIfEntry 5 }
ciscoAtmIfActiveSVPs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active switched virtual paths at
this interface."
::= { ciscoAtmIfEntry 6 }
ciscoAtmIfActiveSVCs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active switched virtual channels at
this interface."
::= { ciscoAtmIfEntry 7 }
ciscoAtmIfTotalConnections OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of existing connections at
this interface."
::= { ciscoAtmIfEntry 8 }
ciscoAtmIfConfVplIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of configured VP interfaces at this physical
interface."
::= { ciscoAtmIfEntry 9 }
ciscoAtmIfPortType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
cpu(2),
ethernet(3),
oc3Utp(4),
oc3SingleModeFiber(5),
oc3MultiModeFiber(6),
oc12SingleModeFiber(7),
ds3(8),
e3(9),
ds1(10),
e1(11),
oc3Utp3(12),
oc3Utp5(13),
oc3SmIr(14),
oc3SmIrPlus(15),
oc3SmLr(16),
oc3Pof(17),
oc12MultiModeFiber(18),
oc12SmIr(19),
oc12SmIrPlus(20),
oc12SmLr(21),
oc12Pof(22),
oc12SmLr2(23),
oc12SmLr3(24),
atm25(25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of physical layer medium on the port."
::= { ciscoAtmIfEntry 10 }
ciscoAtmIfXmitLed OBJECT-TYPE
SYNTAX INTEGER {
off(1),
steadyGreen(2),
steadyYellow(3),
steadyRed(4),
flashGreen(5),
flashYellow(6),
flashRed(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit LED color of this port."
::= { ciscoAtmIfEntry 11 }
ciscoAtmIfRecvLed OBJECT-TYPE
SYNTAX INTEGER {
off(1),
steadyGreen(2),
steadyYellow(3),
steadyRed(4),
flashGreen(5),
flashYellow(6),
flashRed(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive LED color of this port."
::= { ciscoAtmIfEntry 12 }
ciscoAtmIfXmitCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells transmitted of this interface,
including p2p and p2mp cells."
::= { ciscoAtmIfEntry 13 }
ciscoAtmIfRecvCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells received of this interface,
including p2p and p2mp cells."
::= { ciscoAtmIfEntry 14 }
ciscoAtmIfSvcMinVci OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum of the range of values from which VCI's
are assigned to new SVC connections. By this value
being larger, more VCI's are reserved for setting up
PVCs. This applies to every VPI of the physical
interface and every logical port.
The object is deprecated because it is recommended to
use ciscoAtmInterfaceConfMinSvccVci of the
CISCO-ATM2-MIB which is meant for the same purpose."
::= { ciscoAtmIfEntry 15 }
ciscoAtmIfIlmiConfiguration OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable ILMI configuration on this interface.
The configuration takes effect only on the next
interface restart. Disabling this object will also
disable atmIfIlmiAddressRegistration and
atmIfIlmiAutoConfiguration and atmIfIlmiKeepAlive"
DEFVAL {disabled}
::= { ciscoAtmIfEntry 16 }
ciscoAtmIfIlmiAddressRegistration OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable ILMI Address Registration on on
this interface. The configuration takes effect only
on the next interface restart."
DEFVAL {disabled}
::= { ciscoAtmIfEntry 17 }
ciscoAtmIfIlmiAutoConfiguration OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable ILMI link and interface type
determination. The configuration takes effect only on
the next interface restart."
DEFVAL {disabled}
::= { ciscoAtmIfEntry 18 }
ciscoAtmIfIlmiKeepAlive OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time that should elapse between
successive ILMI keepalive messages sent on this
interface. A value of 0 disables ILMI keepalive messages
on this interface."
DEFVAL {0}
::= { ciscoAtmIfEntry 19 }
ciscoAtmIfSoftVcDestAddress OBJECT-TYPE
SYNTAX NsapAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 20 byte ATM address of the destination ATM
interface for soft ATM PVC/PVP"
::= { ciscoAtmIfEntry 20 }
ciscoAtmIfUniSignallingVersion OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
atmfUni3Dot0(2),
atmfUni3Dot1(3),
atmfUni4Dot0(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of UNI signalling that is currently
being used on the interface. The appropriate
value, either atmfUni3Dot0, atmfUni3Dot1 or
atmfUni4Dot0, is used when the interface is
an UNI or IISP interface. The value notApplicable
is used when the interface is a PNNI interface or
when signalling is disabled. This may reflect a
manually configured value for the signalling
version, or may be determined by other means
such as auto-configuration.Setting this
variable to a value of 'notApplicable' is not
allowed. To modify the
ciscoAtmIfUniSignallingVersion, ifAdminStatus
has to be down and
atmIfIlmiAutoConfiguration disabled."
::= { ciscoAtmIfEntry 21 }
ciscoAtmIfSvcUpcIntent OBJECT-TYPE
SYNTAX INTEGER {
passing(1),
tagging(2),
dropping(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for SVCs established through this
interface. Values other than passing are allowed only if
policing is supported on the interface. Also serves to
determine UPC to use on the terminating (destination)
half-leg of Soft PVCs.
This object has been deprecated in favor of the per-service
category objects ciscoAtmIfSvcUpcIntentCbr,
ciscoAtmIfSvcUpcIntentVbrRt, ciscoAtmIfSvcUpcIntentVbrNrt,
ciscoAtmIfSvcUpcIntentAbr, ciscoAtmIfSvcUpcIntentUbr.
Note that if those objects are set to different values,
the return value for this object cannot be correct."
DEFVAL { passing }
::= { ciscoAtmIfEntry 22 }
ciscoAtmIfAddressType OBJECT-TYPE
SYNTAX INTEGER { nsap(1), esi(2), e164(3), null(4) }
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An indication of the type of the ATM
addresses on this interface. To configure a new
atm address, set ciscoAtmIfAddress to the
address, then set this object to ether nsap(1),
or esi(2), or e164(3), depending on the type
of address of ciscoAtmIfAddress.
To delete the address, set this object to
null(4).
Adding nsap address type to this interface has the effect
of canceling the existing esi address, if there is one.
Similarly, adding the esi address on this interface also
has the effect of removing the existing nsap address.
The value of ciscoAtmIfAddress has no effect when
this object is set to null(4).
For the switch, the nsap/esi address can only exist on
the cpu port for signalling applications."
::= { ciscoAtmIfEntry 23 }
ciscoAtmIfAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0|6|8|20))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The ATM address of this interface, which
can be either nsap, esi or e164.
For the switch, the nsap/esi address can only
exist on the cpu port."
::= { ciscoAtmIfEntry 24 }
ciscoAtmIfWellKnownVcMode OBJECT-TYPE
SYNTAX INTEGER {
-- the following two values are states:
-- these values may be read or written
automatic(1),
manual(2),
-- the following value is an action:
-- it may be written, but is never read
manualDeleteUponEntry(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether well-known VCs should be
automatically or manually created for the
interface.
In automatic(1) mode, well-known VCs will be
created with default VPI/VCI values upon startup or
upon entry to the automatic mode. While in this
mode, well-known VCs will not be allowed to be
deleted or modified by user commands. This is
the default mode at startup for equipment which
supports automatic well-known VC creation.
In manual(2) mode, well-known VCs won't be
automatically created. Instead, the user will be
allowed to delete and create PVCs with the
reserved encapsulation types aalQsAal, aal5Ilmi,
and aal5Pnni as applicable. And
these PVCs will be allowed to have VCI values
in the range <5-16383>, instead of <32-16383>.
The manualDeleteUponEntry(3) action causes
any existing VCs with reserved encapsulation
types (aalQsAal, aal5Ilmi or aal5Pnni) to be
deleted for this interface as it enters
the manual state."
DEFVAL {automatic}
::= { ciscoAtmIfEntry 31 }
ciscoAtmIfSignallingAdminStatus OBJECT-TYPE
SYNTAX INTEGER {enabled(1), disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable signalling/sscop on this interface.The
disabled(2) action causes all the active SVCs on
this interface to be cleared."
DEFVAL {enabled}
::= {ciscoAtmIfEntry 32}
ciscoAtmIfCdLed OBJECT-TYPE
SYNTAX INTEGER {
off(1),
steadyGreen(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cd LED color of this port."
::= { ciscoAtmIfEntry 33 }
ciscoAtmIfIlmiAccessFilter OBJECT-TYPE
SYNTAX INTEGER {
permitAll(1),
permitPrefix(2),
permitPrefixAndWellknownGroups(3),
permitPrefixAndAllGroups(4),
useGlobalDefaultFilter(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The access filter which allows or denies certain
ILMI registered addresses on this interface when
ciscoAtmIfIlmiAddressRegistration is set to enable(1).
permitAll - This permits all ILMI registered addresses.
permitPrefix - The address being registered by ILMI
should have their prefix portion of the address match
the ILMI prefixes used on this interface. If there
are any per-interface ILMI address prefixes
configured, then the prefixes derived from the
switch addresses are not considered ILMI prefixes for
this interface.
permitPrefixAndWellknownGroups - This is same as
'permitPrefix' but in addition it also allows the
well-known group addresses. The well-known group
addresses will be the old LECS address and any address
matching the ATM Forum address prefix for well known
addresses.
(i.e.,C5.0079.0000.0000.0000.0000.0000.00A03E)
permitPrefixAndAllGroups - This is same
as 'permitPrefix' but in addition it allows all
group addresses.
useGlobalDefaultFilter - It indicates that this
interface uses the per-switch global default
filter"
DEFVAL { useGlobalDefaultFilter }
::= { ciscoAtmIfEntry 34 }
ciscoAtmIfConfigAESA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0|7|20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ATM End System Address (AESA) of this interface
can be configured by entering the full 20 octet AESA,
or the 6 octet ESI and 1 octet Selector Byte.
If the ESI and Selector Byte are entered, the full AESA
will be formed using a 13 octet prefix from ILMI.
The full AESA can be read using ciscoAtmIfDerivedAESA.
A length of zero indicates that no AESA is configured.
For the switch, the AESA address can only
exist on the cpu port."
::= { ciscoAtmIfEntry 35 }
ciscoAtmIfDerivedAESA OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM End System Address (AESA) of this interface.
The AESA is configured using ciscoAtmIfConfigAESA
or can be automatically generated.
A length of zero indicates that no AESA is specified.
For the switch, the AESA address can only
exist on the cpu port."
::= { ciscoAtmIfEntry 36 }
ciscoAtmIfE164Address OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ATM E164 address of this interface.
When a native E.164 number is configured for this
inteface, only native E.164 numbers are
transmitted/received as the called/calling party
numbers. The presence of an ATM E164 address allows
both an algorithmic translation between the native E164
number and E164 AESA address formats (see
ciscoAtmIfE164AutoConversionOnly) and use of the ATM
E164 Address for the calling/called party number of
transmitted/received calls. Entering an address will
disable ciscoAtmIfE164AutoConversionOnly.
An address of length zero indicates that no address is
specified.
For the switch, the E164 address cannot
exist on the cpu port."
::= { ciscoAtmIfEntry 37 }
ciscoAtmIfE164AutoConversionOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable E164 auto conversion only on this
interface.
The E164 auto-conversion allows for algorithmic
translation between the native E164 number and E164
AESA address formats.
This object is used when there is no native E.164
number specified for this interface (see
ciscoAtmIfE164Address), to specify that only native
E.164 numbers are transmitted/received as the
called/calling party numbers and to enable/disable
E164 auto-conversion.
For the switch, E164 auto-conversion cannot
exist on the cpu port."
::= { ciscoAtmIfEntry 38 }
ciscoAtmIfRxCellUpcViolations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of nonconforming cells detected by
Usage Parameter Control (UPC) for cells received on
this interface. This object is not instantiated on
systems that do not have support for collecting such
statistics."
::= { ciscoAtmIfEntry 39 }
ciscoAtmIfRxCellDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of cells that were discarded
within the switch. The cells can be discarded
due to non conformance detected by Usage Parameter
Control (UPC) or queue overflows within the switch.
This object is not instantiated on systems that do
not have support for collecting such statistics."
::= { ciscoAtmIfEntry 40 }
ciscoAtmIfIlmiFSMState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
restarting(2),
waitDevType(3),
deviceAndPortTypeComplete(4),
awaitPnniConfig(5),
pnniConfigComplete(6),
awaitRestartAck(7),
upAndNormal(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ILMI states meaningful when the value of
ciscoAtmIfIlmiConfiguration indicates that the ILMI
is enabled for an ATM interface:
down -- Stopped or just booted or
interface down
restarting -- Establishing link connectivity
waitDevType -- Awaiting device type from peer
deviceAndPortTypeComplete -- Determined device
and/or port type
awaitPnniConfig -- Awaiting PNNI configuration
from peer
pnniConfigComplete -- Completed interface PNNI
configuration
awaitRestartAck -- Awaiting peer range values
after restart
upAndNormal -- Up and normal."
::= { ciscoAtmIfEntry 41 }
ciscoAtmIfIlmiUpDownChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times ILMI enters and leaves
the state of upAndNormal."
::= { ciscoAtmIfEntry 42 }
ciscoAtmIfSscopFSMState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
outgoingConnectionPending(2),
incomingConnectionPending(3),
dataTransferReady(4),
outgoingDisconnectionPending(5),
outgoingResyncPending(6),
incomingResyncPending(7),
outgoingRecoveryPending(8),
incomingRecoveryPending(9),
concurrentResyncPending(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SSCOP state for an ATM interface as
defined by the ITU-T. The state is idle
when the interface is down or SSCOP is
not enabled on the ATM interface"
REFERENCE
"ITU-T Recommendation Q.2110 (07/94)"
::= { ciscoAtmIfEntry 43 }
ciscoAtmIfSscopUpDownChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times SSCOP enters and leaves
the state of DataTransferReady."
::= { ciscoAtmIfEntry 44 }
ciscoAtmIfSvcUpcIntentCbr OBJECT-TYPE
SYNTAX UpcMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for Constant Bit Rate SVCs established
through this interface. Values other than passing are
allowed only if policing is supported on the interface.
Also serves to determine UPC to use on the terminating
(destination) half-leg of Soft PVCs."
DEFVAL { passing }
::= { ciscoAtmIfEntry 45 }
ciscoAtmIfSvcUpcIntentVbrRt OBJECT-TYPE
SYNTAX UpcMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for Variable Bit Rate - Real Time SVCs
established through this interface. Values other than
passing are allowed only if policing is supported on the
interface. Also serves to determine UPC to use on the
terminating (destination) half-leg of Soft PVCs."
DEFVAL { passing }
::= { ciscoAtmIfEntry 46 }
ciscoAtmIfSvcUpcIntentVbrNrt OBJECT-TYPE
SYNTAX UpcMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for Variable Bit Rate - Non Real Time SVCs
established through this interface. Values other than
passing are allowed only if policing is supported on the
interface. Also serves to determine UPC to use on the
terminating (destination) half-leg of Soft PVCs."
DEFVAL { passing }
::= { ciscoAtmIfEntry 47 }
ciscoAtmIfSvcUpcIntentAbr OBJECT-TYPE
SYNTAX UpcMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for Available Bit Rate SVCs established
through this interface. Values other than passing are
allowed only if policing is supported on the interface.
Also serves to determine UPC to use on the terminating
(destination) half-leg of Soft PVCs."
DEFVAL { passing }
::= { ciscoAtmIfEntry 48 }
ciscoAtmIfSvcUpcIntentUbr OBJECT-TYPE
SYNTAX UpcMethod
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the policing (Usage Parameter Control or UPC)
action to take for Unspecified Bit Rate SVCs established
through this interface. Values other than passing are
allowed only if policing is supported on the interface.
Also serves to determine UPC to use on the terminating
(destination) half-leg of Soft PVCs."
DEFVAL { passing }
::= { ciscoAtmIfEntry 49 }
ciscoAtmIfMIBNotifications OBJECT IDENTIFIER ::= { ciscoAtmIfMIB 0 }
ciscoAtmIfEvent NOTIFICATION-TYPE
OBJECTS {
ciscoAtmIfIlmiFSMState,
ciscoAtmIfSscopFSMState}
STATUS current
DESCRIPTION
"This notification is generated when ever ILMI or SSCOP
FSM state changes"
::= { ciscoAtmIfMIBNotifications 1 }
-- conformance information
ciscoAtmIfMIBConformance
OBJECT IDENTIFIER ::= { ciscoAtmIfMIB 3 }
ciscoAtmIfMIBCompliances
OBJECT IDENTIFIER ::= { ciscoAtmIfMIBConformance 1 }
ciscoAtmIfMIBGroups
OBJECT IDENTIFIER ::= { ciscoAtmIfMIBConformance 2 }
-- compliance statements
ciscoAtmIfMIBCompliance MODULE-COMPLIANCE
STATUS obsolete -- superceded by ciscoAtmIfMIBCompliance2
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup }
::= { ciscoAtmIfMIBCompliances 1 }
ciscoAtmIfMIBCompliance2 MODULE-COMPLIANCE
STATUS obsolete -- superceded by ciscoAtmIfMIBCompliance3
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup2
}
::= { ciscoAtmIfMIBCompliances 2 }
ciscoAtmIfMIBCompliance3 MODULE-COMPLIANCE
STATUS obsolete -- superceded by ciscoAtmIfMIBCompliance4
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup2,
ciscoAtmIfMIBGroup3
}
::= { ciscoAtmIfMIBCompliances 3 }
ciscoAtmIfMIBCompliance4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup2,
ciscoAtmIfMIBGroup3,
ciscoAtmIfMIBGroup4
}
::= { ciscoAtmIfMIBCompliances 4 }
ciscoAtmIfMIBCompliance5 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup2,
ciscoAtmIfMIBGroup3,
ciscoAtmIfMIBGroup4,
ciscoAtmIfMIBGroup5
}
::= { ciscoAtmIfMIBCompliances 5 }
ciscoAtmIfMIBCompliance6 MODULE-COMPLIANCE
STATUS obsolete -- superceded by ciscoAtmIfMIBCompliance7
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup2,
ciscoAtmIfMIBGroup4,
ciscoAtmIfMIBGroup5,
ciscoAtmIfMIBGroup6,
ciscoAtmIfMIBGroup7
}
::= { ciscoAtmIfMIBCompliances 6 }
ciscoAtmIfMIBCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup,
ciscoAtmIfMIBGroup4,
ciscoAtmIfMIBGroup5,
ciscoAtmIfMIBGroup6,
ciscoAtmIfMIBGroup7,
ciscoAtmIfMIBGroup8
}
::= { ciscoAtmIfMIBCompliances 7 }
ciscoAtmIfMIBCompliance8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco ATM
interface group."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmIfMIBGroup4,
ciscoAtmIfMIBGroup5,
ciscoAtmIfMIBGroup6,
ciscoAtmIfMIBGroup7,
ciscoAtmIfMIBGroup8,
ciscoAtmIfMIBGroup9,
ciscoAtmIfMIBGroup10,
ciscoAtmIfNotifyGroup
}
::= { ciscoAtmIfMIBCompliances 8 }
-- units of conformance
ciscoAtmIfMIBGroup OBJECT-GROUP
OBJECTS { ciscoAtmIfType,
ciscoAtmIfSide,
ciscoAtmIfUniType,
ciscoAtmIfPVPs,
ciscoAtmIfPVCs,
ciscoAtmIfActiveSVPs,
ciscoAtmIfActiveSVCs,
ciscoAtmIfTotalConnections,
ciscoAtmIfConfVplIf,
ciscoAtmIfPortType,
ciscoAtmIfXmitLed,
ciscoAtmIfRecvLed,
ciscoAtmIfXmitCells,
ciscoAtmIfRecvCells,
ciscoAtmIfSvcMinVci,
ciscoAtmIfIlmiConfiguration,
ciscoAtmIfIlmiAddressRegistration,
ciscoAtmIfIlmiAutoConfiguration,
ciscoAtmIfIlmiKeepAlive,
ciscoAtmIfSoftVcDestAddress,
ciscoAtmIfCdLed
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the information
about ATM interface related information also an
ability to configure certain parameters of
ATM interface."
::= { ciscoAtmIfMIBGroups 1 }
ciscoAtmIfMIBGroup2 OBJECT-GROUP
OBJECTS { ciscoAtmIfUniSignallingVersion,
ciscoAtmIfSvcUpcIntent
}
STATUS deprecated
DESCRIPTION
"Additional collection of objects providing
ATM interface related information."
::= { ciscoAtmIfMIBGroups 2 }
ciscoAtmIfMIBGroup3 OBJECT-GROUP
OBJECTS { ciscoAtmIfAddressType,
ciscoAtmIfAddress,
ciscoAtmIfWellKnownVcMode,
ciscoAtmIfSignallingAdminStatus
}
STATUS obsolete
DESCRIPTION
"Additional collection of objects providing ATM
interface related information."
::= { ciscoAtmIfMIBGroups 3 }
ciscoAtmIfMIBGroup4 OBJECT-GROUP
OBJECTS { ciscoAtmIfIlmiAccessGlobalDefaultFilter,
ciscoAtmIfIlmiAccessFilter
}
STATUS current
DESCRIPTION
"Additional collection of objects providing ATM
switch and interface related information on Access
Filter for ILMI Address Registration."
::= { ciscoAtmIfMIBGroups 4 }
ciscoAtmIfMIBGroup5 OBJECT-GROUP
OBJECTS { ciscoAtmIfConfigAESA,
ciscoAtmIfDerivedAESA,
ciscoAtmIfE164Address,
ciscoAtmIfE164AutoConversionOnly
}
STATUS current
DESCRIPTION
"Additional collection of objects providing ATM
switch and interface related information for ATM Addresses."
::= { ciscoAtmIfMIBGroups 5 }
ciscoAtmIfMIBGroup6 OBJECT-GROUP
OBJECTS { ciscoAtmIfWellKnownVcMode,
ciscoAtmIfSignallingAdminStatus
}
STATUS current
DESCRIPTION
"Additional collection of objects providing ATM
interface related information."
::= { ciscoAtmIfMIBGroups 6 }
ciscoAtmIfMIBGroup7 OBJECT-GROUP
OBJECTS { ciscoAtmIfRxCellUpcViolations,
ciscoAtmIfRxCellDiscards,
ciscoAtmIfIlmiFSMState,
ciscoAtmIfIlmiUpDownChanges,
ciscoAtmIfSscopFSMState,
ciscoAtmIfSscopUpDownChanges
}
STATUS current
DESCRIPTION
"Additional collection of objects providing ATM switch
interface Resource Manager, ILMI and Signalling related
information."
::= { ciscoAtmIfMIBGroups 7 }
ciscoAtmIfMIBGroup8 OBJECT-GROUP
OBJECTS { ciscoAtmIfUniSignallingVersion,
ciscoAtmIfSvcUpcIntentCbr,
ciscoAtmIfSvcUpcIntentVbrRt,
ciscoAtmIfSvcUpcIntentVbrNrt,
ciscoAtmIfSvcUpcIntentAbr,
ciscoAtmIfSvcUpcIntentUbr
}
STATUS current
DESCRIPTION
"Additional collection of objects providing
ATM interface related information."
::= { ciscoAtmIfMIBGroups 8 }
ciscoAtmIfMIBGroup9 OBJECT-GROUP
OBJECTS { ciscoAtmIfType,
ciscoAtmIfSide,
ciscoAtmIfUniType,
ciscoAtmIfPVPs,
ciscoAtmIfPVCs,
ciscoAtmIfActiveSVPs,
ciscoAtmIfActiveSVCs,
ciscoAtmIfTotalConnections,
ciscoAtmIfConfVplIf,
ciscoAtmIfPortType,
ciscoAtmIfXmitLed,
ciscoAtmIfRecvLed,
ciscoAtmIfXmitCells,
ciscoAtmIfRecvCells,
ciscoAtmIfIlmiConfiguration,
ciscoAtmIfIlmiAddressRegistration,
ciscoAtmIfIlmiAutoConfiguration,
ciscoAtmIfIlmiKeepAlive,
ciscoAtmIfSoftVcDestAddress,
ciscoAtmIfCdLed
}
STATUS current
DESCRIPTION
"A collection of objects providing the information
about ATM interface related information also an
ability to configure certain parameters of
ATM interface."
::= { ciscoAtmIfMIBGroups 9 }
ciscoAtmIfMIBGroup10 OBJECT-GROUP
OBJECTS { ciscoAtmIfNotifsEnabled
}
STATUS current
DESCRIPTION
"Additional objects providing means to enable/disable
notifications related to the interface ILMI and
SSCOP state"
::= { ciscoAtmIfMIBGroups 10 }
ciscoAtmIfNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoAtmIfEvent }
STATUS current
DESCRIPTION
"Interface ILMI and SSCOP FSM notifications"
::= { ciscoAtmIfMIBGroups 11 }
END
Reference in New Issue View Git Blame Copy Permalink