MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-APS-EXT-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1010 lines
33 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-APS-EXT-MIB.my: Cisco Automatic Protection Switching (APS)
-- Extension MIB
--
-- April 2001, Ashok Chippa, Altaf Shaikh
--
-- Copyright (c) 2001 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
--
CISCO-APS-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoExperiment
FROM CISCO-SMI
cApsConfigEntry, cApsStatusEntry, cApsChanStatusEntry,
CApsK1K2, cApsChanConfigEntry
FROM CISCO-APS-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
cApsExtMIB MODULE-IDENTITY
LAST-UPDATED "200301310000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "Cisco Systems, Inc.
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
Email: optmgmt-dev@cisco.com"
DESCRIPTION
"The Cisco APS Extension MIB extends the Cisco APS MIB
in order to a) support path APS architectures and
b) support interfaces other than SONET (e.g. Cisco
CDL).
For configuration and monitoring of APS for CDL interfaces,
all objects and notifications in the Cisco APS MIB apply,
with the exception of the following:
- cApsStatusK1K2Rcv and cApsStatusK1K2Trans in
cApsStatusEntry,
- cApsConfigSdBerThreshold and cApsConfigSfBerThreshold
in cApsConfigEntry,
- cApsChanStatusSignalDegrades and
cApsChanStatusSignalFailures in cApsChanStatusEntry,
- cApsStatusFEPLFs in cApsStatusEntry,
- cApsEventFEPLF.
Whenever the description of an object in the Cisco APS MIB
refers to a SONET LTE interface, this applies to CDL
terminating interfaces as well. CDL interfaces have
ifType values other than 'sonet'.
For SONET path APS support, whenever the description of an
object in the Cisco APS MIB refers to a SONET LTE
interface, this applies to SONET PTE interfaces as well.
SONET PTE interfaces have ifType values 'sonetPath'.
"
REVISION "200301310000Z"
DESCRIPTION
"Updated the default value for the object
cApsConfigSwitchoverEnableInterval.
"
REVISION "200205310000Z"
DESCRIPTION
"Added table cApsChanConfigExtTable which augments
cApsChanConfigTable in CISCO-APS-MIB, and table
cApsChanAssociationTable that provides for all
protection/working channels, the associated working/protection
channel IP address.
"
REVISION "200205200000Z"
DESCRIPTION
"Added objects for control of APS message transport and
to show additional channel status information.
"
REVISION "200105210000Z"
DESCRIPTION
"The initial version of this MIB augments cApsConfigEntry (in
the CISCO-APS-MIB) with two new APS configuration parameters,
cApsConfigSpan and cApsConfigYcable, and cApsStatusEntry with
two new status parameters, cApsStatusCdlApsBytesRcv and
cApsStatusCdlApsBytesTrans.
"
::= { ciscoExperiment 72 }
cApsExtMIBObjects OBJECT IDENTIFIER
::= { cApsExtMIB 1 }
cApsExtMIBConformance OBJECT IDENTIFIER
::= { cApsExtMIB 2 }
CdlApsBytes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This Textual Convention describes an object that stores
the APS protocol field used in CDL. The semantics of the
CDL APS protocol field are similar to those of the
SONET K1 and K2 byte APS protocol field.
"
SYNTAX OCTET STRING (SIZE (2))
CApsMessageTransport ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of transport used to exchange APS protocol messages.
none
There is no APS message exchange between the endpoints
of the associated channels.
autoSelect
APS automatically selects a transport mechanism
to send APS messages. The following transport
mechanisms are attempted, in the following order
of priority:
- apsChannel
- dcc
- osc
dcc
APS messages are transmitted over the data communications
channels (DCCs) in the overhead of the associated channels.
apsChannel
APS messages are transmitted in overhead bytes of the
associated channels that are defined specifically
to carry APS messages.
ip
APS messages are transmitted over IP. The IP network can
consist of any combination of data communication channels
(DCCs), optical supervisory channels (OSCs), and
out-of-band Data Communication Networks (DCNs).
osc
APS messages are transmitted over the Optical Supervisory
Channel (OSC).
"
SYNTAX INTEGER {
none(1),
autoSelect(2),
dcc(3),
apsChannel(4),
ip(5),
osc(6)
}
CApsChannelConfigNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This Textual Convention describes an object that is set to
a unique channel number within an APS group.
The value 0 indicates the null channel. The values 1-14
define a working channel.
"
REFERENCE
"Bellcore (Telcordia Technologies) GR-253-CORE,
Issue 2,Revision 2 (January 1999), 5.3.2.
"
SYNTAX Integer32 (0..14)
cApsNotifiesEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true', it allows the generation of
the APS-related notifications defined in the CISCO-APS-MIB.
When this object is set to 'false', it prevents the generation
of the APS-related notifications defined in the CISCO-APS-MIB.
By default, this object is set to 'false'."
::= { cApsExtMIBObjects 1 }
cApsConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CApsConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the cApsConfigTable."
::= { cApsExtMIBObjects 2 }
cApsConfigExtEntry OBJECT-TYPE
SYNTAX CApsConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cApsConfigExtTable."
AUGMENTS { cApsConfigEntry }
::= { cApsConfigExtTable 1 }
CApsConfigExtEntry ::= SEQUENCE {
cApsConfigSpan INTEGER,
cApsConfigYcable INTEGER,
cApsConfigMinSearchUpInterval Integer32,
cApsConfigMaxSearchUpInterval Integer32,
cApsConfigSwitchoverEnableInterval Integer32,
cApsConfigMessageTransport CApsMessageTransport,
cApsConfigMessageHolddown Integer32,
cApsConfigMessageHolddownCount Integer32,
cApsConfigMessageMaxInterval Integer32,
cApsConfigFarEndGroupName SnmpAdminString,
cApsConfigFarEndIpAddressType InetAddressType,
cApsConfigFarEndIpAddress InetAddress
}
cApsConfigSpan OBJECT-TYPE
SYNTAX INTEGER { hopByHop(1), endToEnd(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The span (hopByHop or endToEnd) for the APS group.
hopByHop
This refers to linear APS, e.g. linear SONET APS, or hopByHop
CDL APS. In a DWDM system, an APS channel may be associated
with either an individual wavelength or an optical fiber.
All APS channels within an APS group must be of the same type.
Systems that support linear APS on an individual wavelength
basis, must assign an ifIndex to each such wavelength.
endToEnd
This refers to path APS, e.g. endToEnd CDL APS. In this
configuration, each APS channel in the APS group is associated
with an endToEnd user path. This codepoint does not apply to
interfaces with an ifType value of 'sonet'.
This object may not be modified if the associated
cApsConfigRowStatus object is equal to 'active'.
"
DEFVAL { hopByHop }
::= { cApsConfigExtEntry 1 }
cApsConfigYcable OBJECT-TYPE
SYNTAX INTEGER { noYcable(1),
ycable(2),
ycableXconnectCommon(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Y-cable configuration for the APS group associated with
user channels.
noYcable
The APS channels in the APS group are not connected to an
external Y-cable.
ycable
Two user-side interfaces (not necessarily SONET or CDL) are
connected to an external y-cable and are grouped into an APS
group for endToEnd APS. The received user signal is split
in the y-cable coupler and is received on both the interfaces.
However, only one interface must transmit toward the user at any
given time. With cApsConfigYcable set to 'ycable', the
cApsConfigSpan must be set to 'endToEnd'. There must be
only two APS channels in an APS group with cApsConfigYcable
set to 'ycable'.
ycableXconnectCommon
This refers to a configuration where two user-side interfaces
are connected to an external y-cable. The two signals received
on these interface are connected to the same cross connect in
the switch. The switch fabric selects one of the two received
signals, duplicates it, and forwards it to two network side
interfaces grouped for 1+1 linear APS. The received signal from
the network side is transmitted to only one user-side interface.
cApsConfigSpan is ignored if cApsConfigYcable is set to
'ycableXconnectCommon'. There must be only two APS channels in
an APS group with cApsConfigYcable set to
'ycableXconnectCommon'.
This object may not be modified if the associated
cApsConfigRowStatus object is equal to 'active'.
If this object is set to 'ycable' or 'ycableXconnectCommon',
the user must shut one of the two channels before setting
cApsConfigRowStatus to 'notInService'.
"
DEFVAL { noYcable }
::= { cApsConfigExtEntry 2 }
cApsConfigMinSearchUpInterval OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface that is up.
This object specifies the minimum time interval between
switchovers when both interfaces go down. A backoff algorithm
should be used to increase the time interval between
successive switchovers.
"
DEFVAL { 2 }
::= { cApsConfigExtEntry 3 }
cApsConfigMaxSearchUpInterval OBJECT-TYPE
SYNTAX Integer32 (1..120)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface that is up.
This object specifies the maximum time interval between
switchovers when both interfaces go down.
"
DEFVAL { 32 }
::= { cApsConfigExtEntry 4 }
cApsConfigSwitchoverEnableInterval OBJECT-TYPE
SYNTAX Integer32 (1..120)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the value of the timer to control
the minimum interval between switchovers. After a switchover,
APS is re-enabled only after this amount of time has elapsed,
in order to prevent quick successive switchovers.
"
DEFVAL { 3 }
::= { cApsConfigExtEntry 5 }
cApsConfigMessageTransport OBJECT-TYPE
SYNTAX CApsMessageTransport
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of transport configured for
exchange of APS protocol messages. The type of transport
currently being used is indicated in the
cApsStatusMessageTransport object.
When this object is set to 'ip', values must be specified
for the cApsConfigFarEndIpAddressType, cApsConfigFarEndIpAddress
and cApsConfigFarEndGroupName objects.
"
DEFVAL { autoSelect }
::= { cApsConfigExtEntry 6 }
cApsConfigMessageHolddown OBJECT-TYPE
SYNTAX Integer32 (100..10000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
APS messages are exchanged between systems to support
bidirectional or linear operation. To avoid potential
system misbehavior in which APS messages would be
triggered in an uncontrolled fashion, a hold down timer
is introduced that prevents successive event-triggered
APS messages from being sent in too short a time
interval.
This object specifies the minimum time between
event driven requests.
"
DEFVAL { 5000 }
::= { cApsConfigExtEntry 7 }
cApsConfigMessageHolddownCount OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
The maximum number of APS messages that can be sent within
one cApsConfigMessageHolddown interval.
"
DEFVAL { 2 }
::= { cApsConfigExtEntry 8 }
cApsConfigMessageMaxInterval OBJECT-TYPE
SYNTAX Integer32 (1000..120000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
An APS message is sent unconditionally, whenever the amount
of time specified by this object has elapsed since the last
transmission of an APS message.
"
DEFVAL { 15000 }
::= { cApsConfigExtEntry 9 }
cApsConfigFarEndGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
APS messages, used to support bidirectional or linear
operation, can be sent out-of-band over an IP network.
In this case, this object is used to specify the a textual
name for the APS group at the far-end to which the message
is being sent.
"
::= { cApsConfigExtEntry 10 }
cApsConfigFarEndIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.
This object specifies the type of IP address defined
in cApsConfigFarEndIpAddress.
"
DEFVAL { ipv4 }
::= { cApsConfigExtEntry 11 }
cApsConfigFarEndIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.
This object specifies the IP address of the far end, which is
used as the destination address in APS messages transmitted by
this network element.
"
::= { cApsConfigExtEntry 12 }
cApsStatusExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CApsStatusExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the cApsStatusTable.
"
::= { cApsExtMIBObjects 3 }
cApsStatusExtEntry OBJECT-TYPE
SYNTAX CApsStatusExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cApsStatusExtTable.
"
AUGMENTS { cApsStatusEntry }
::= { cApsStatusExtTable 1 }
CApsStatusExtEntry ::= SEQUENCE {
cApsStatusCdlApsBytesRcv CdlApsBytes,
cApsStatusCdlApsBytesTrans CdlApsBytes,
cApsStatusMessageTransport CApsMessageTransport
}
cApsStatusCdlApsBytesRcv OBJECT-TYPE
SYNTAX CdlApsBytes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the APS bytes received on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Rcv
for SONET.
"
::= { cApsStatusExtEntry 1 }
cApsStatusCdlApsBytesTrans OBJECT-TYPE
SYNTAX CdlApsBytes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the APS bytes transmitted on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Trans
for SONET.
"
::= { cApsStatusExtEntry 2 }
cApsStatusMessageTransport OBJECT-TYPE
SYNTAX CApsMessageTransport
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of transport currently being used
for exchange of APS protocol messages.
The value of this object is the same as the value specified in
the cApsConfigMessageTransport object, except when the value of
that object is 'autoSelect'. In that case, the type of
transport that has been automatically selected is indicated
by this object.
"
::= { cApsStatusExtEntry 3 }
cApsChanStatusExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CApsChanStatusExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the cApsChanStatusTable.
"
::= { cApsExtMIBObjects 4 }
cApsChanStatusExtEntry OBJECT-TYPE
SYNTAX CApsChanStatusExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cApsChanStatusExtTable.
"
AUGMENTS { cApsChanStatusEntry }
::= { cApsChanStatusExtTable 1 }
CApsChanStatusExtEntry ::= SEQUENCE {
cApsChanStatusExtRequest CApsK1K2
}
cApsChanStatusExtRequest OBJECT-TYPE
SYNTAX CApsK1K2
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest priority local request for a channel in an APS
group.
This object uses only the 'Type of Request' part (bits 1-4)
of the K1 byte.
"
::= { cApsChanStatusExtEntry 1 }
cApsChanConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CApsChanConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the cApsChanConfigTable.
"
::= { cApsExtMIBObjects 5 }
cApsChanConfigExtEntry OBJECT-TYPE
SYNTAX CApsChanConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cApsChanConfigExtTable.
"
AUGMENTS { cApsChanConfigEntry }
::= { cApsChanConfigExtTable 1 }
CApsChanConfigExtEntry ::= SEQUENCE {
cApsChanConfigReflectorMode TruthValue
}
cApsChanConfigReflectorMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the channel is in reflector mode or not.
Reflector mode establishes a communication channel
between the local PTE and the remote PTE at the other
end of the SONET path.
This object has a value of true(1), if reflector mode is
configured and a value of false(2), if the reflector mode
is not configured on the channel.
"
::= { cApsChanConfigExtEntry 1 }
cApsChanAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CApsChanAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the configured IP address of the
protect/working interfaces.
"
::= { cApsExtMIBObjects 6 }
cApsChanAssociationEntry OBJECT-TYPE
SYNTAX CApsChanAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in cApsChanAssociationTable.
"
INDEX { cApsChanAssociationGroupName,
cApsChanAssociationNumber,
cApsChanAssociationMapNumber
}
::= { cApsChanAssociationTable 1 }
CApsChanAssociationEntry ::= SEQUENCE {
cApsChanAssociationGroupName SnmpAdminString,
cApsChanAssociationNumber CApsChannelConfigNumber,
cApsChanAssociationMapNumber CApsChannelConfigNumber,
cApsChanAssociationIpAddressType InetAddressType,
cApsChanAssociationIpAddress InetAddress
}
cApsChanAssociationGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A textual name for the APS group which this channel is
included in.
"
::= { cApsChanAssociationEntry 1 }
cApsChanAssociationNumber OBJECT-TYPE
SYNTAX CApsChannelConfigNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This field is set to a unique working/protection channel
number within an APS group. The value 0 indicates the
null channel. The values 1-14 define a working channel.
"
::= { cApsChanAssociationEntry 2 }
cApsChanAssociationMapNumber OBJECT-TYPE
SYNTAX CApsChannelConfigNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This field is set to the associated working/protection
channel number corresponding to the field
cApsChanAssociationNumber within an APS group.
The value 0 indicates the null channel. The values 1-14
define a working channel.
"
::= { cApsChanAssociationEntry 3 }
cApsChanAssociationIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object specifies the type of IP address defined
in cApsChanAssociationIpAddress.
"
::= { cApsChanAssociationEntry 4 }
cApsChanAssociationIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the working/protection channel.
If cApsChanAssociationNumber represents a working channel
number, this object indicates the IP Address of the associated
protection channel.
If cApsChanAssociationNumber represents a protection channel
number, this object indicates the IP Address of the associated
working channel.
"
::= { cApsChanAssociationEntry 5 }
-- conformance information
cApsExtGroups OBJECT IDENTIFIER ::= { cApsExtMIBConformance 1 }
cApsExtCompliances OBJECT IDENTIFIER ::= { cApsExtMIBConformance 2 }
cApsExtCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceded by cApsExtCompliance2
DESCRIPTION
"The compliance statement for augmented APS groups."
MODULE
MANDATORY-GROUPS { cApsNotifiesEnableGroup, cApsConfigPathExt }
OBJECT cApsConfigSpan
MIN-ACCESS read-only
DESCRIPTION
"Write access and support for the 'end-to-end' codepoint are
not required.
"
GROUP cApsConfigYcableExt
DESCRIPTION
"This group is required for entities that implement Y cable
protection.
"
GROUP cApsConfigSearchExt
DESCRIPTION
"This group is required for entities that do not always monitor
the standby interface.
"
GROUP cApsStatusCdlExt
DESCRIPTION
"This group is required for entities that support APS on
CDL interfaces.
"
::= { cApsExtCompliances 1 }
cApsExtCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for augmented APS groups."
MODULE
MANDATORY-GROUPS { cApsNotifiesEnableGroup, cApsConfigPathExt }
OBJECT cApsConfigSpan
MIN-ACCESS read-only
DESCRIPTION
"Write access and support for the 'end-to-end' codepoint are
not required.
"
GROUP cApsConfigYcableExt
DESCRIPTION
"This group is required for entities that implement Y cable
protection.
"
GROUP cApsConfigSearchExt
DESCRIPTION
"This group is required for entities that do not always monitor
the standby interface.
"
GROUP cApsStatusCdlExt
DESCRIPTION
"This group is required for entities that support transport of
APS messages in the APS channel on CDL interfaces.
"
GROUP cApsConfigMessageExt
DESCRIPTION
"This group is required for entities that support APS message
transport over data communication channels (DCCs), optical
supervisory channels (OSCs), or Data Communication Networks
(DCNs).
"
GROUP cApsConfigSwitchoverTimerExt
DESCRIPTION
"This group is optional.
"
OBJECT cApsConfigMessageTransport
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
"
GROUP cApsConfigIPExt
DESCRIPTION
"This group is required for entities that support APS message
transport over IP. The IP network can consist of any
combination of data communication channels (DCCs), optical
supervisory channels (OSCs), and Data Communication Networks
(DCNs).
"
GROUP cApsStatusMessageExt
DESCRIPTION
"This group is required for entities that support APS message
transport over data communication channels (DCCs), optical
supervisory channels (OSCs), or Data Communication Networks
(DCNs).
"
GROUP cApsChanStatusRequestExt
DESCRIPTION
"This group is optional.
"
::= { cApsExtCompliances 2 }
cApsExtComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for augmented APS groups.
"
MODULE
MANDATORY-GROUPS { cApsChanConfigExt, cApsChanAssociationGroup}
::= { cApsExtCompliances 3 }
-- units of conformance
cApsNotifiesEnableGroup OBJECT-GROUP
OBJECTS
{
cApsNotifiesEnable
}
STATUS current
DESCRIPTION
"A managed object that controls the generation of APS-related
notifications defined in the CISCO-APS-MIB.
"
::= { cApsExtGroups 1 }
cApsConfigPathExt OBJECT-GROUP
OBJECTS
{
cApsConfigSpan
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information applicable to path APS architectures.
"
::= { cApsExtGroups 2 }
cApsConfigYcableExt OBJECT-GROUP
OBJECTS
{
cApsConfigYcable
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups when Y cable
protection is supported.
"
::= { cApsExtGroups 3 }
cApsConfigSearchExt OBJECT-GROUP
OBJECTS
{
cApsConfigMinSearchUpInterval,
cApsConfigMaxSearchUpInterval
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups in which the
standby interface is not monitored.
"
::= { cApsExtGroups 4 }
cApsStatusCdlExt OBJECT-GROUP
OBJECTS
{
cApsStatusCdlApsBytesRcv,
cApsStatusCdlApsBytesTrans
}
STATUS current
DESCRIPTION
"An augmentation to cApsStatusTable objects providing status
information applicable to APS groups for CDL.
"
::= { cApsExtGroups 5 }
cApsConfigSwitchoverTimerExt OBJECT-GROUP
OBJECTS
{
cApsConfigSwitchoverEnableInterval
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information to prevent quick successive
switchovers.
"
::= { cApsExtGroups 6 }
cApsConfigMessageExt OBJECT-GROUP
OBJECTS
{
cApsConfigMessageTransport,
cApsConfigMessageHolddown,
cApsConfigMessageHolddownCount,
cApsConfigMessageMaxInterval,
cApsConfigFarEndGroupName
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information applicable to message
transport used to exchange APS protocol messages.
"
::= { cApsExtGroups 7 }
cApsConfigIPExt OBJECT-GROUP
OBJECTS
{
cApsConfigFarEndIpAddressType,
cApsConfigFarEndIpAddress
}
STATUS current
DESCRIPTION
"An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups
communicating over IP.
"
::= { cApsExtGroups 8 }
cApsStatusMessageExt OBJECT-GROUP
OBJECTS
{
cApsStatusMessageTransport
}
STATUS current
DESCRIPTION
"An augmentation to cApsStatusTable objects providing
status information applicable to message transport
used to exchange APS protocol messages.
"
::= { cApsExtGroups 9 }
cApsChanStatusRequestExt OBJECT-GROUP
OBJECTS
{
cApsChanStatusExtRequest
}
STATUS current
DESCRIPTION
"An augmentation to cApsChanStatusTable objects providing
additional status information for channels in APS groups.
"
::= { cApsExtGroups 10 }
cApsChanConfigExt OBJECT-GROUP
OBJECTS
{
cApsChanConfigReflectorMode
}
STATUS current
DESCRIPTION
"An augmentation to cApsChanConfigTable objects providing
configuration information of channels in APS groups.
"
::= { cApsExtGroups 11 }
cApsChanAssociationGroup OBJECT-GROUP
OBJECTS
{
cApsChanAssociationIpAddressType,
cApsChanAssociationIpAddress
}
STATUS current
DESCRIPTION
"cApsChanAssociationTable object provides for all
protection/working channels, the associated working/protection
channel IP address."
::= { cApsExtGroups 12 }
END
Reference in New Issue View Git Blame Copy Permalink