MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/DOCS-IF-M-CMTS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

3421 lines
138 KiB
Plaintext
Raw Blame History

DOCS-IF-M-CMTS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32,
Gauge32,
Counter32,
TimeTicks
FROM SNMPv2-SMI
TimeStamp,
TruthValue,
RowStatus,
StorageType,
AutonomousType
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
entPhysicalSerialNum,
entPhysicalAlias,
entPhysicalAssetID,
entPhysicalClass,
PhysicalIndexOrZero,
PhysicalIndex,
entityPhysicalGroup,
entityPhysical2Group,
entityPhysical3Group,
entityGeneralGroup,
entityLogical2Group,
entityMappingGroup
FROM ENTITY-MIB
ifIndex,
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
TenthdBmV
FROM DOCS-IF-MIB
docsQosServiceFlowId
FROM DOCS-QOS-MIB
SnmpTagValue
FROM SNMP-TARGET-MIB
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
clabProjDocsis
FROM CLAB-DEF-MIB;
docsIfMCmtsMib MODULE-IDENTITY
LAST-UPDATED "200511160000Z"
ORGANIZATION "Cable Television Laboratories, Inc"
CONTACT-INFO
"Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027-9750
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: mibs@cablelabs.com"
DESCRIPTION
"This MIB module contains the management objects for the
configuration and management of the External PHY interface
(DEPI) of the M-CMTS architecture (Modular CMTS)."
REVISION "200511160000Z"
DESCRIPTION
"Revised Version
includes ECN M-OSSI-N-05.0254-5"
REVISION "200508050000Z"
DESCRIPTION
"Initial version of the DOCSIS Modular CMTS MIB
module.
This revision is published as part of the CableLabs
M-CMTS OSS specification
Copyright 1999-2005 Cable Television Laboratories, Inc.
All rights reserved."
::= { clabProjDocsis 6 }
-- ---------------------------------------------------------
-- Textual Conventions
-- ---------------------------------------------------------
--
--
-- ---------------------------------------------------------------------
-- Main Groups
-- ---------------------------------------------------------------------
docsIfMCmtsNotifications OBJECT IDENTIFIER
::= { docsIfMCmtsMib 0 }
docsIfMCmtsObjects OBJECT IDENTIFIER
::= { docsIfMCmtsMib 1 }
docsIfMCmtsBaseObjects OBJECT IDENTIFIER
::= { docsIfMCmtsObjects 1 }
docsIfMCmtsCoreObjects OBJECT IDENTIFIER
::= { docsIfMCmtsObjects 2 }
docsIfMCmtsEqamObjects OBJECT IDENTIFIER
::= { docsIfMCmtsObjects 3 }
docsIfMCmtsDepiObjects OBJECT IDENTIFIER
::= { docsIfMCmtsObjects 4 }
docsIfMCmtsDepiSessionObjects OBJECT IDENTIFIER
::= { docsIfMCmtsDepiObjects 1 }
docsIfMCmtsDepiQosObjects OBJECT IDENTIFIER
::= { docsIfMCmtsDepiObjects 2 }
-- --------------------------------------------------------------------
-- DOCSIS RF Interface Extension objects
-- M-CMTS Base Extensions
-- --------------------------------------------------------------------
--
-- --------------------------------------------------------------------
--
-- Phy Parameters dependencies OBJECT-IDENTITY definitions
--
-- --------------------------------------------------------------------
docsIfMCmtsBaseAdmin OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Registration point for M-CMTS characterization of PHY
parameters dependencies."
::= { docsIfMCmtsBaseObjects 1 }
docsPHYParamFixValue OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that this PHY parameter is fix and cannot
be changed."
::= { docsIfMCmtsBaseAdmin 1 }
docsPHYParamSameValue OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the PHY parameter value is the same for
the elements in a dependency group; thus, a change in
the PHY parameter of an element in the group will change
the PHY parameter value in the other elements of the
dependency group."
::= { docsIfMCmtsBaseAdmin 2 }
docsPHYParamAdjacentValues OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that the PHY parameter has an adjacency or
sequence pattern for the elements in a dependency group
e.g., A group of channels all using J.83 Annex A, may set
frequencies in the group by setting a 6 MHz spacing
between the channels in the group. Vendors may rather
use a more detailed vendor-specific OBJECT-IDENTITY or a
table pointer to describe this type of PHY parameter
adjacencies."
::= { docsIfMCmtsBaseAdmin 3 }
docsPHYParamFrequencyRange OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This object indicates that the frequency in a group ID
is constrained to a frequency range. Vendors may extend
the MIB construct containing this reference to detail such
constraints or rather use a more detailed vendor-specific
OBJECT-IDENTITY or a table pointer to describe the
frequency range supported."
::= { docsIfMCmtsBaseAdmin 4 }
-- ---------------------------------------------------------------------
-- DOCSIS RF Interface Extension objects
-- M-CMTS Core Extensions
-- ---------------------------------------------------------------------
docsIfMCmtsCoreDownstreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsCoreDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"M-CMTS Core extensions for the DOCSIS RFI Downstream
docsIfDownstreamTable."
::= { docsIfMCmtsCoreObjects 1 }
docsIfMCmtsCoreDownstreamEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsCoreDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table.
There is a corresponding entry for each entry of
docsIfDownstreamChannelTable."
INDEX { ifIndex }
::= { docsIfMCmtsCoreDownstreamTable 1 }
DocsIfMCmtsCoreDownstreamEntry ::= SEQUENCE {
docsIfMCmtsCoreDownstreamType INTEGER,
docsIfMCmtsCoreDownstreamPhyDependencies BITS
}
docsIfMCmtsCoreDownstreamType OBJECT-TYPE
SYNTAX INTEGER {
integrated(1),
external(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value 'integrated' means the Downstream Interface is
integrated to the DOCSIS MAC interface. This type
corresponds to the legacy DOCSIS Downstream Interface of
ifType 128.
The value 'external' indicates a Downstream External
Interface that is associated to a QAM channel by mechanisms
like a DEPI session."
::= { docsIfMCmtsCoreDownstreamEntry 1 }
docsIfMCmtsCoreDownstreamPhyDependencies OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PHY parameters being flagged in the DEPI session as
DEPI TSID group dependencies.
A value of all bits on zero indicates no TSID group
dependencies for PHY parameters. If this object value is
the zero length string , indicates no DEPI session is
configured for the M-CMTS Downstream interface or the
Downstream interface is of the type 'integrated'."
DEFVAL { '00000000'H }
::= { docsIfMCmtsCoreDownstreamEntry 2 }
-- ---------------------------------------------------------------------
-- DOCSIS RF Interface Extension objects
-- M-CMTS EQAM device Extensions
-- ---------------------------------------------------------------------
docsIfMCmtsEqamDownstreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsEqamDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"M-CMTS EQAM extensions for the DOCSIS RFI Downstream
docsIfDownstreamTable."
::= { docsIfMCmtsEqamObjects 1 }
docsIfMCmtsEqamDownstreamEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsEqamDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table."
INDEX { ifIndex }
::= { docsIfMCmtsEqamDownstreamTable 1 }
DocsIfMCmtsEqamDownstreamEntry ::= SEQUENCE {
docsIfMCmtsEqamDownstreamTSID Unsigned32,
docsIfMCmtsEqamDownstreamPhyDependencies BITS,
docsIfMCmtsEqamDownstreamDevicePhyParamLock BITS,
docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock BITS,
docsIfMCmtsEqamDownstreamAllocationType INTEGER,
docsIfMCmtsEqamDownstreamAllocationStatus BITS,
docsIfMCmtsEqamDownstreamAllocationTimeout Unsigned32,
docsIfMCmtsEqamDownstreamDRRPAdvertizing TruthValue,
docsIfMCmtsEqamDownstreamUdpPortMapping InetPortNumber
}
docsIfMCmtsEqamDownstreamTSID OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry."
::= { docsIfMCmtsEqamDownstreamEntry 1 }
docsIfMCmtsEqamDownstreamPhyDependencies OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The summary of the M-CMTS Downstream Interface
dependencies based on the constraints of
docsIfMCmtsEqamGroupDependencyEntry.
A BIT position set to '1' indicates the PHY parameter
belongs to a dependency group (DEPI TSID group).
The opposite, a BIT position set to '0', indicates
the QAM channel does not belong to a dependency group."
DEFVAL { '00000000'H }
::= { docsIfMCmtsEqamDownstreamEntry 2 }
docsIfMCmtsEqamDownstreamDevicePhyParamLock OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType is equal to
docsPHYParamFixValue
When a specific BIT is set to '1', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is locked for SNMP
SETs, returning 'notWritable' on SET attempts.
When a specific BIT is set to '0', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is processed.
Note that when a BIT is set to '0' an SNMP SET as described
above may affect the PHY parameter in other QAM channels
as described in docsIfMCmtsEqamGroupDependencyTable
or rejected with error 'wrongValue' based on the constrains
indicated by the EQAM capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable of
DOCS-If-M-CMTS-MIB.
This object contains information that is used to signal
'lock' PHY parameters to other entities via interfaces such
as DEPI and ERMI."
::= { docsIfMCmtsEqamDownstreamEntry 3 }
docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative configuration of lock bits for EQAM
channels PHY parameters.
A BIT set of this object is meaningful when the same BIT
set in docsIfMCmtsEqamDownstreamDevicePhyParamLock is set
to '0'. Therefore, a SET to this object when the entry
value of docsIfMCmtsEqamDownstreamDevicePhyParamLock is
set to '1' returns error 'wrongValue'.
When a PHY parameter BIT in this object is set to '1'
the QAM channel PHY parameter in
docsIfMCmtsDepiSessionConfigTable is locked
for SNMP SETs returning error 'notWritable' on those
attempts.
Sets to this object could be complex; as a rule of
thumb, SNMP agents ignore bits that are not recognized
(e.g., extensions). An attempt to set BITs while
docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock is set
to '1' is rejected and the error code 'wrongValue' is
returned."
::= { docsIfMCmtsEqamDownstreamEntry 4 }
docsIfMCmtsEqamDownstreamAllocationType OBJECT-TYPE
SYNTAX INTEGER {
docsisOnly(1),
videoOnly(2),
any(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mechanisms authorized to reserve and control
this M-CMTS Downstream interface.
When configured to 'docsisOnly' indicates that it can be
allocated only to serve data over DOCSIS.
When configured to 'videoOnly' indicates that it can be
allocated only to video services and not for Data over
DOCSIS.
'any' indicates the M-CMTS Downstream Interface can be
reserved for DOCSIS or video services."
::= { docsIfMCmtsEqamDownstreamEntry 5 }
docsIfMCmtsEqamDownstreamAllocationStatus OBJECT-TYPE
SYNTAX BITS {
other(0),
docsisDepi(1),
docsisErm(2),
videoErm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the service(s) the M-CMTS Downstream Interface
is allocated for.
'other' BIT set to '1' indicates the resource is currently
allocated to DOCSIS and/or Video services by a proprietary
mechanism.
'docsisDepi' BIT set to '1' indicates the DEPI Control
mechanism is currently in use in the M-CMTS Downstream
Interface allocation, e.g., an L2TPv3 DEPI Session.
'docsisErm' indicates that ERM Resource Allocation
Interface is being used in the M-CMTS Downstream Interface
allocation.
'video' indicates the resource is currently allocated by a
video control plane using an extension of the M-CMTS ERM
Resource Control Plane.
All BITs set to zero or a zero-length octet string
indicates the M-CMTS Downstream Interface is available for
allocation constrained to the type of resource allocation
referenced by docsIfMCmtsEqamDownstreamAllocationType.
It may be the case where several BITs are set to '1'
simultaneously:
The most common case is 'docsisDepi' and 'docsisERM' BITs.
In this situation, the ERM has allocated the QAM channel
and the DEPI Session handles optional parameters
configuration and/or in-band link status.
Combinations like 'docsisDepi' and 'videoERM' may indicate
concurrent services, which is vendor specific."
REFERENCE "DEPI L2TP ERM RTSP section 7"
::= { docsIfMCmtsEqamDownstreamEntry 6 }
docsIfMCmtsEqamDownstreamAllocationTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of seconds the EQAM device waits
before advertising the QAM channel resource is idle and/or
accepting a session establishment from a different
control plane to the previous one. As a side effect,
the entry in docsIfMCmtsDepiSessionConfigTable is aged out
and destroyed only after the expiration of this reservation
timeout. A value zero makes the resource available
immediately for allocation to others.
Note that not explicit indefinite timeout needs to be
defined to indicate exclusive allocation to a requester.
The EQAM device can support this condition for example by
configuring restricted access to certain Resource
Allocation control plane to a particular IP host in the
form of source IP or authentication mechanisms."
::= { docsIfMCmtsEqamDownstreamEntry 7 }
docsIfMCmtsEqamDownstreamDRRPAdvertizing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates when a QAM channel resource should be advertised
via DRRP (DOCSIS Resource Registration Protocol) to an Edge
Resource Manager (ERM).
This Object is useful when a device is allocated for
instance to DOCSIS only by a static reservation
(docsIfMCmtsEqamDownstreamAllocationType 'docsisOnly').
It means an Edge Resource Manager won't have this QAM
channel resource available allocate upon requests from
different entities.
Note that DRRP currently does not signal EQAM resources
as reserved for a particular service.
The MIB objects docsIfMCmtsEqamDownstreamDRRPAdvertizing
and docsIfMCmtsEqamDownstreamAllocationType are used
primarily to statically reserve QAM channels and prevent
its allocation by dynamic means such ERM or some other
existing mechanisms. Therefore, caution is needed when
setting this object to 'true' since the allocation Type
docsIfMCmtsEqamDownstreamAllocationType is not known by
ERMs with DRRP support."
DEFVAL { true }
::= { docsIfMCmtsEqamDownstreamEntry 8 }
docsIfMCmtsEqamDownstreamUdpPortMapping OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mapping to
DEPI flows, this object reports the value 1701 (the default
UDP port when M-CMTS Initiates a DEPI session with L2TPv3
header over UDP)."
::= { docsIfMCmtsEqamDownstreamEntry 9 }
-- EQAM M-CMTS Downstream Interface Capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsEqamDownstreamCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the QAM channel capabilities
for the M-CMTS Downstream Interface PHY parameters in the
EQAM device."
::= { docsIfMCmtsEqamObjects 2 }
docsIfMCmtsEqamDownstreamCapabilitiesEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsEqamDownstreamCapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table."
INDEX { ifIndex }
::= { docsIfMCmtsEqamDownstreamCapabilitiesTable 1 }
DocsIfMCmtsEqamDownstreamCapabilitiesEntry ::= SEQUENCE {
docsIfMCmtsEqamDownstreamCapabFrequency BITS,
docsIfMCmtsEqamDownstreamCapabBandwidth BITS,
docsIfMCmtsEqamDownstreamCapabPower BITS,
docsIfMCmtsEqamDownstreamCapabModulation BITS,
docsIfMCmtsEqamDownstreamCapabInterleaver BITS,
docsIfMCmtsEqamDownstreamCapabJ83Annex BITS,
docsIfMCmtsEqamDownstreamCapabConcurrentServices BITS,
docsIfMCmtsEqamDownstreamCapabServicesTransport BITS,
docsIfMCmtsEqamDownstreamCapabMuting BITS
}
docsIfMCmtsEqamDownstreamCapabFrequency OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
adjacentChannel(1),
adjacentChannelOrder(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel frequency capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
frequency value has dependencies with other QAM channels
and an entry that includes this QAM channel is in
in docsIfMCmtsEqamGroupDependencyTable for the PHY
parameter 'frequency'.
'adjacentChannel' BIT set to '1' indicates the QAM channel
frequencies in the dependency group (DEPI TSID group) are
adjacent and constrained in a frequency range based on
the number of QAM channels in the dependency group.
'adjacentChannelOrder' BIT set to '1' indicates the QAM
channel frequency adjacency is based in the QAM channel
sequence like entPhysicalParentRelPos in EntPhysicalTable
or other vendor sequence.
e.g., a dependency group of four QAM channels
with 'adjacentChannelOrder' BIT set to '1':
The 4th QAM channel in the sequence gets a frequency
assignment f + 1*bandwidth when the frequency value of
the 3rd QAM channel in the sequence is set to f.
Similarly the 1st QAM channel in the sequence gets a
frequency assignment of f - 2*bandwidth and the 2nd QAM
channels gets a frequency of f -1*bandwidth.
'adjacentChannel' 'adjacentChannelOrder' BITs may be set to
'1' when a dependency group includes the QAM channel
of this M-CMTS Downstream interface and the value of the
object docsIfMCmtsEqamGroupDependencyType is
docsPHYParamAdjacentValues.
'adjacentChannel' BIT may be set to '1' if
'eqamDependency' BIT is set to '1'. The same way,
'adjacentChannelOrder' BIT may be set to '1' and implies
'adjacentChannel' BIT is set to '1'."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 1 }
docsIfMCmtsEqamDownstreamCapabBandwidth OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
chan6Mhz(1),
chan8Mhz(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Bandwidth capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
bandwidth value has dependencies with other QAM channels
as indicated in docsIfMCmtsEqamGroupDependencyTable.
'chan6Mhz' set to '1' indicates 6 MHz channel width
support.
'chan8Mhz' set to '1' indicates 8 MHz channel width
support.
When 'eqamDependency' BIT is set to '1', a set to the
channel bandwidth PHY parameter of a QAM channels in a
dependency group (with docsIfMCmtsEqamGroupDependencyType
set to docsPHYParamSameValue), sets the same channel
bandwidth value to all QAM channels in the dependency
group."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 2 }
docsIfMCmtsEqamDownstreamCapabPower OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Power capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
power value has dependencies with other QAM channels
as indicated in docsIfMCmtsEqamGroupDependencyTable.
When 'eqamDependency' BIT is set to '1', a set to the
power level PHY parameter of a QAM channels in a
dependency group (with docsIfMCmtsEqamGroupDependencyType
set to docsPHYParamSameValue), sets the same power
level to all QAM channels in the dependency group."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 3 }
docsIfMCmtsEqamDownstreamCapabModulation OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
qam64(1),
qam256(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Modulation capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
modulation value has dependencies with other QAM channels
as indicated in docsIfMCmtsEqamGroupDependencyTable.
'qam64' set to '1' indicates 64 QAM modulation support.
'qam256' set to '1' indicates 256 QAM modulation support.
When 'eqamDependency' BIT is set to '1', a set to the
modulation PHY parameter of a QAM channels in a
dependency group (with docsIfMCmtsEqamGroupDependencyType
set to docsPHYParamSameValue), sets the same modulation
type to all QAM channels in the dependency group."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 4 }
docsIfMCmtsEqamDownstreamCapabInterleaver OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
taps8Increment16(1),
taps16Increment8(2),
taps32Increment4(3),
taps64Increment2(4),
taps128Increment1(5),
taps12increment17(6),
taps128increment2(7),
taps128increment3(8),
taps128increment4(9),
taps128increment5(10),
taps128increment6(11),
taps128increment7(12),
taps128increment8(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Interleaver capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
interleave value has dependencies with other QAM channels
as indicated in docsIfMCmtsEqamGroupDependencyTable.
'taps8Increment16' set to '1' indicates the support of
j = 8, i = 16 interleave.
'taps16Increment8' set to '1' indicates the support of
j = 16, i = 8 interleave.
'taps32Increment4' set to '1' indicates the support of
j = 32, i = 4 interleave.
'taps64Increment2' set to '1' indicates the support of
j = 64, i = 2 interleave.
'taps128Increment1' set to '1' indicates the support of
j = 128, i = 1 interleave.
'taps12increment17' set to '1' indicates the support of
j = 12, i = 17 interleave.
'tabs128increment2' set to '1' indicates the support of
j = 128, i = 2 interleave.
'tabs128increment3' set to '1' indicates the support of
j = 128, i = 3 interleave.
'tabs128increment4' set to '1' indicates the support of
j = 128, i = 4 interleave.
'tabs128increment5' set to '1' indicates the support of
j = 128, i = 5 interleave.
'tabs128increment6' set to '1' indicates the support of
j = 128, i = 6 interleave.
'tabs128increment7' set to '1' indicates the support of
j = 128, i = 7 interleave.
'tabs128increment8' set to '1' indicates the support of
j = 128, i = 8 interleave.
When 'eqamDependency' BIT is set to '1', a set to the
interleave PHY parameter of a QAM channels in a
dependency group (with docsIfMCmtsEqamGroupDependencyType
set to docsPHYParamSameValue), sets the same Interleave
value to all QAM channels in the dependency group."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 5 }
docsIfMCmtsEqamDownstreamCapabJ83Annex OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
annexA(1),
annexB(2),
annexC(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel J.83 Annex Capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
J.83 Annex value has dependencies with other QAM channels
as indicated in docsIfMCmtsEqamGroupDependencyTable.
'annexA' set to '1' indicates J.83 Annex A support.
'annexB' set to '1' indicates J.83 Annex B support.
'annexC' set to '1' indicates J.83 Annex C support.
When 'eqamDependency' BIT is set to '1', a set to the
J.83 Annex PHY parameter of a QAM channels in a
dependency group (with docsIfMCmtsEqamGroupDependencyType
set to docsPHYParamSameValue), sets the same J.83 Annex
value to all QAM channels in the dependency group."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 6 }
docsIfMCmtsEqamDownstreamCapabConcurrentServices OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0),
videoAndDocsis(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Concurrent Services Capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
is part of a dependency group that supports concurrent
services mode as indicated in
docsIfMCmtsEqamGroupDependencyTable.
'videoAndDocsis' BIT set to '1' indicates video transport
and DOCSIS transport can be supported simultaneously.
Video and DOCSIS transport service types are described in
docsIfMCmtsEqamDownstreamCapabServicesTransport."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 7 }
docsIfMCmtsEqamDownstreamCapabServicesTransport OBJECT-TYPE
SYNTAX BITS {
qamDependency(0),
mpeg2OverIP(1),
dmpt(2),
psp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel Services transports modes Capabilities.
'eqamDependency' BIT set to '1' indicates the QAM channel
Service transport type has dependencies with other QAM
channels as indicated in
docsIfMCmtsEqamGroupDependencyTable.
'mpeg2OverIP' set to '1' indicates video transports as
conventional VoD is supported (known as MPT mode, MPEG-2
transport).
'dmpt' set to 1 indicates DOCSIS MPT mode (D-MPT) support.
'psp' set to 1 indicates DOCSIS Packet Streaming Protocol
mode (PSP) support.
When 'eqamDependency' BIT is set to '1', a request to set
a QAM channel to a service type in a dependency group
(with docsIfMCmtsEqamGroupDependencyType set to
docsPHYParamSameValue) may be rejected."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 8 }
docsIfMCmtsEqamDownstreamCapabMuting OBJECT-TYPE
SYNTAX BITS {
eqamDependency(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QAM channel muting capabilities.
'eqamDependency' BIT set to '1' indicates the EQAM Mute
state has dependencies with other QAM channels as
indicated in docsIfMCmtsEqamGroupDependencyTable.
When 'eqamDependency' BIT is set to '1', a request to
mute a QAM channels in a dependency group (with
docsIfMCmtsEqamGroupDependencyType set to
docsPHYParamSameValue), sets all QAM channels in the
dependency group to mute."
::= { docsIfMCmtsEqamDownstreamCapabilitiesEntry 9 }
-- ---------------------------------------------------------------------
-- EQAM M-CMTS Group Dependency of PHY parameters Definitions
-- Defines the group of QAM channels that may be impacted for
-- individual QAM channels PHY parameters changes. Extends ENTITY-MIB
-- ---------------------------------------------------------------------
docsIfMCmtsEqamGroupDependencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsEqamGroupDependencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the rules that identify groups of
QAM channels with PHY parameters dependencies.
A PHY parameter dependency group means that a set to
a QAM channel parameter may affect the value of
other QAM Channels in the group.
TSID is a broadcast term borrowed by the M-CMTS
architecture to represent a unique identifier of QAM
channels in the M-CMTS architecture.
TSID Group is the DEPI concept of a set of QAM channels
with a PHY parameter dependency. This module refers to
TSID group as a PHY dependency Group.
This table uses the ENTITY-MIB physical component structure
to allows the managed system to describe the QAM channels'
PHY parameters dependencies. A management entity can use
the information from this table to generate the DEPI TSID
Groups.
Examples of PHY dependencies could be usage of adjacent
frequencies, or QAM channels of RF ports restricted, or
same interleaver value, modulation and J.83 Annex value.
Additional details and rules to describe the PHY parameter
dependency is indicated in
docsIfMCmtsEqamGroupDependencyType.
Vendors may extend via other MIB modules the usage of
docsIfMCmtsEqamGroupDependencyType."
::= { docsIfMCmtsEqamObjects 3 }
docsIfMCmtsEqamGroupDependencyEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsEqamGroupDependencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of this table.
QAM channels are modeled as PhysicalClass 'port' from
the ENTITY-MIB.
An QAM channel can be represented as part of an entity
MIB containment tree as follows:
chassis(EQAM device)
.container(EQAM Slot)
.module(field-replaceable-module)
.module ( Physical RF spigot)
. port (QAM channel)
PhysicalClass 'stack' is left optional and not included
as a reference or examples for this table.
Based on the hardware capabilities the Agent will create
entries in this table including the entPhysicalEntry of
the close element to the root (e.g., up to 'chassis' or
'stack') including the PHY parameter of the dependency
as part of the entry index
The Aggregation is then defined as all the QAM channels
(entity PhysicalClass = 'port') below the tree as
indicated in entyPhysicalContainsTable.
Logical or software dependencies of the QAM channels PHY
parameters in addition to the hardware dependency entries
can be present and MUST persist to system
re-initialization. The storage realization of hardware
dependent entries are 'permanent' or 'readOnly'. The
storage realization of logical dependency entries is
'nonVolatile'.
PHY parameters dependencies being logically defined may be
present in this table but its configuration is outside of
the scope of this MIB Module, including the definition of
simulated Physical components such backplane types or
modules accomplish its logical grouping.
PHY parameters with no Physical entities associated in
this table indicates no PHY dependencies for certain groups
of QAM channels.
Administrative changes to the
docsIfMCmtsEqamGroupDependencyPhyParamLock are preserved in
non-volatile memory upon system re-initialization.
Note that any change in the system due to the
insertion or removal or components will reset to factory
default the entries associated to those components.
An entry in this table is reflected in the MIB object
docsIfMExtDownstreamTSIDGroupPhyParamFlag for individual
QAM channels.
A recursive method to find the PHY dependency group of an
QAM channel A, PHY parameter X is as follows:
The parent tree of QAM channel A is recursively calculated
by navigating entyPhysicalContainsTable from bottom to top
Pi(P1..Pn)
The list Mj (M1..Mn) of
docsIfMCmtsEqamGroupDependencyPhysicalIndex represents the
values from this table with PHY parameter
docsIfMCmtsEqamGroupDependencyPhyParam X and/or 'all'
The list Qi (Q1..n) is the list of matches of Mi in Pi
Qi with the lower position in the entyPhysicalContainsTable
is selected Qy and My is the group criteria selected.
All QAM channels Bi below My are candidates of being in
the dependency group.
Each Bi is verified as A for its own BPi parent tree to
verify that in effect My is the lowest denominator in Mi
BPi intersection to become part of the Dependency Group
of A."
INDEX {
docsIfMCmtsEqamGroupDependencyPhyParam,
docsIfMCmtsEqamGroupDependencyPhysicalIndex
}
::= { docsIfMCmtsEqamGroupDependencyTable 1 }
DocsIfMCmtsEqamGroupDependencyEntry ::= SEQUENCE {
docsIfMCmtsEqamGroupDependencyPhyParam INTEGER,
docsIfMCmtsEqamGroupDependencyPhysicalIndex PhysicalIndexOrZero,
docsIfMCmtsEqamGroupDependencyGroupID Unsigned32,
docsIfMCmtsEqamGroupDependencyType AutonomousType
}
docsIfMCmtsEqamGroupDependencyPhyParam OBJECT-TYPE
SYNTAX INTEGER {
noDependencies(0),
all(1),
frequency(2),
bandwidth(3),
power(4),
modulation(5),
interleave(6),
annex(7),
symbolRate(8),
mute(9)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the type of DOCSIS PHY parameter
that may have dependencies when setting an individual
object in the dependency group.
The value 'all' may be used as a wildcard to indicate
all PHY parameters. The other enumeration values are
DOCSIS PHY parameters.
The opposite to 'all' is 'noDependencies', which indicates
no dependencies in PHY parameters, but is only used to
indicate no dependencies across all the EQAM device. Thus,
when used, 'notDependencies' is accompanied by
docsIfMCmtsEqamGroupDependencyPhysicalIndex '0' as the only
entry in the table.
In this way it is clearly distinguished when an EQAM device
has dependencies instead of an empty table."
::= { docsIfMCmtsEqamGroupDependencyEntry 1 }
docsIfMCmtsEqamGroupDependencyPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the physical element from where the PHY
parameter dependency for QAM channels applies.
All the QAM channels elements under this Physical index
will belong to a dependency group of the specified PHY
parameter."
::= { docsIfMCmtsEqamGroupDependencyEntry 2 }
docsIfMCmtsEqamGroupDependencyGroupID OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID assigned for the QAM channels in the
dependency group.
The value of this object is unique in the scope of the
PHY parameter being mapped."
::= { docsIfMCmtsEqamGroupDependencyEntry 3 }
docsIfMCmtsEqamGroupDependencyType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the type of dependency associated
with this dependency group.
Basic type of dependencies are docsPHYParamSameValue,
docsPHYParamAdjacentValues, docsPHYParamFrequencyRange.
Vendors may define their own rules and policies to describe
their implementation dependency definitions such as
RowPointers to table entries or OBJECT-IDENTITY clauses.
If the dependency is not described this object is set to
zeroDotZero, although the dependency does exist."
::= { docsIfMCmtsEqamGroupDependencyEntry 4 }
-- ---------------------------------------------------------------------
-- EQAM M-CMTS Global configuration
-- Defines the structure to include configuration rules applicable
-- at EQAM device initialization and management actions
-- Uses the containment structure of the ENTITY-MIB to create the global
-- configuration rules.
-- ---------------------------------------------------------------------
docsIfMCmtsEqamGlobCfgDownTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsEqamGlobCfgDownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table for setting multiple parameters of multiple
QAM channels.
Creating an entry in this table will set automatically
all QAM Channels in the containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex in
entPhysicalContainsTable to the parameter values
specified during the row creation.
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be a valid
Physical index of entPhysicalTable.
The ways to configure QAM channels parameters are:
1) Globally.
Using this table, docsIfMCmtsEqamGlobCfgDownTable
2) Directly.
Using docsIfMCmtsEqamDownstreamTable and
docsIfDownstreamChannelTable to change parameters
and lock status of individual QAM channels.
In general an entry in this table will set the parameters
of QAM channels of the containment tree recursively the
same way as doing directly as described in 2)above. It
means, potentially there could be rejections based on
locked parameters and/or PHY dependencies that prevent
the sets.
The row creation in this table is not rejected or set in
'inactive' or 'notInService' state due individual QAM
channels in the group failures due the global set, instead,
an error status is reported per entry.
The processing of the entries in this table (e.g., at system
initialization) is sequential; therefore, it could be
overlapping rules based on the containment tree level of
the entries."
::= { docsIfMCmtsEqamObjects 4 }
docsIfMCmtsEqamGlobCfgDownEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsEqamGlobCfgDownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table.
Entries in this table persist after system
re-initalization.
It is common to have 'holes' in this table
since not all the parameters associated with a QAM channel
might be desired of global set, therefore, columnar values
do not handle default values for entry creation."
INDEX { docsIfMCmtsEqamGlobCfgDownIndex }
::= { docsIfMCmtsEqamGlobCfgDownTable 1 }
DocsIfMCmtsEqamGlobCfgDownEntry ::= SEQUENCE {
docsIfMCmtsEqamGlobCfgDownIndex Unsigned32,
docsIfMCmtsEqamGlobCfgDownPhysicalIndex PhysicalIndexOrZero,
docsIfMCmtsEqamGlobCfgDownBandwidth Integer32,
docsIfMCmtsEqamGlobCfgDownPower TenthdBmV,
docsIfMCmtsEqamGlobCfgDownModulation INTEGER,
docsIfMCmtsEqamGlobCfgDownInterleave INTEGER,
docsIfMCmtsEqamGlogCfgDownAnnex INTEGER,
docsIfMCmtsEqamGlobCfgDownSymbolRateM Unsigned32,
docsIfMCmtsEqamGlobCfgDownSymbolRateN Unsigned32,
docsIfMCmtsEqamGlobCfgDownLockParams BITS,
docsIfMCmtsEqamGlobCfgDownExecutionCode INTEGER,
docsIfMCmtsEqamGlobCfgDownErrorsCount Gauge32,
docsIfMCmtsEqamGlobCfgDownRowStatus RowStatus
}
docsIfMCmtsEqamGlobCfgDownIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier of entries in this table."
::= { docsIfMCmtsEqamGlobCfgDownEntry 1 }
docsIfMCmtsEqamGlobCfgDownPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ENTITY-MIB Physical Index that includes the QAM
channels associated to the global parameter being set.
The QAM Channels covered by this global set are those
linked to the entPhysicalContainsTable containment tree
starting at the value of this object.
The value '0' indicates all containment
elements in the managed system."
::= { docsIfMCmtsEqamGlobCfgDownEntry 2 }
docsIfMCmtsEqamGlobCfgDownBandwidth OBJECT-TYPE
SYNTAX Integer32 (6000000 | 8000000)
UNITS "hertz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel bandwidth of the QAM channels in the containment
tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A set to this object is reflected in docsIfDownChannelWidth
of the QAM channels being set.
The syntax of this object is Integer32 to maintain the same
type of docsIfDownChannelWidth as initially defined in
RFC 2670."
::= { docsIfMCmtsEqamGlobCfgDownEntry 3 }
docsIfMCmtsEqamGlobCfgDownPower OBJECT-TYPE
SYNTAX TenthdBmV
UNITS "dBmV"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel Power Level of the QAM channels in the containment
tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A set to this object is reflected in
docsIfDownChannelPower of the QAM channels being set."
::= { docsIfMCmtsEqamGlobCfgDownEntry 4 }
docsIfMCmtsEqamGlobCfgDownModulation OBJECT-TYPE
SYNTAX INTEGER {
qam64(3),
qam256(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel modulation of the QAM channels in the containment
tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A set to this object is reflected in
docsIfDownChannelModulation of the QAM channels being set.
Values '1' and '2' are not used, only '3'and '4' to
maintain compatibility with docsIfDownChannelModulation
enumeration values initially defined in RFC 2670."
::= { docsIfMCmtsEqamGlobCfgDownEntry 5 }
docsIfMCmtsEqamGlobCfgDownInterleave OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
taps8Increment16(3),
taps16Increment8(4),
taps32Increment4(5),
taps64Increment2(6),
taps128Increment1(7),
taps12increment17(8),
tabs128increment2(9),
tabs128increment3(10),
tabs128increment4(11),
tabs128increment5(12),
tabs128increment6(13),
tabs128increment7(14),
tabs128increment8(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel interleave of the QAM channels in the containment
tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A set to this object is reflected in
docsIfDownChannelInterleave of the QAM channels being set.
Values are defined as follows:
64QAM/256QAM
'taps8Increment16' : protection 5.9/4.1 usec,
latency .22/.15 msec
'taps16Increment8' : protection 12/8.2 usec,
latency .48/.33 msec
'taps32Increment4' : protection 24/16 usec,
latency .98/.68 msec
'taps64Increment2' : protection 47/33 usec,
latency 2/1.4 msec
'taps128Increment1' : protection 95/66 usec,
latency 4/2.8 msec
'taps12increment17' : protection 18/14 usec,
latency 0.43/0.32 msec
Values below are not defined for DOCSIS RFI MIB for
docsIfDownChannelInterleave. The EQAM Channel supports
these values for video services (see
docsIfMCmtsEqamDownstreamCapabInterleaver specific EQAM
supported values).
'tabs128increment2' : protection 190/132 usec,
latency 8/5.6 msec
'tabs128increment3' : protection 285/198 usec,
latency 12/8.4 msec
'tabs128increment4' : protection 379/264 usec,
latency 16/11 msec
'tabs128increment5' : protection 474/330 usec,
latency 20/14 msec
'tabs128increment6' : protection 569/396 usec,
latency 24/17 msec
'tabs128increment7' : protection 664/462 usec,
latency 28/19 msec
'tabs128increment8' : protection 759/528 usec,
latency 32/22 msec
Setting this object without setting
docsIfMCmtsEqamGlogCfgDownAnnex may end up with particular
QAM channels set rejections due to incompatible Annex
parameters, in which case the error 'errorSetFailures'
is reported in docsIfMCmtsEqamGlobCfgDownExecutionCode."
::= { docsIfMCmtsEqamGlobCfgDownEntry 6 }
docsIfMCmtsEqamGlogCfgDownAnnex OBJECT-TYPE
SYNTAX INTEGER {
annexA(3),
annexB(4),
annexC(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel J.83 Annex of the QAM channels in the containment
tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A set to this object is reflected in
docsIfDownChannelAnnex of the QAM channels being set.
Values '1' and '2' are not used, only '3', '4' and '5' to
maintain compatibility with docsIfDownChannelAnnex
enumeration values initially defined in RFC 2670.
This object set has dependencies with
docsIfDownChannelInterleave,
docsIfMCmtsEqamGlobCfgDownBandwidth and probably
docsIfMCmtsEqamGlobCfgDownSymbolRateM/N, in particular
in the rare event of changing the J.83 Annex type for the
already configured EQAM.
An entry set with an invalid combination of J.83 Annex
PHY parameters mentioned above is not executed and
reported as error code 'errorNoCommitted' in
docsIfMCmtsEqamGlobCfgDownExecutionCode.
If an entry sets this object but any of the other J.83
Annex PHY related objects, is missing, the missing
parameters are set to a default value only in the case
of a change of J.83 Annex type (e.g., setting Annex A when
currently in Annex B)."
::= { docsIfMCmtsEqamGlobCfgDownEntry 7 }
docsIfMCmtsEqamGlobCfgDownSymbolRateM OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel Symbol M factor of the QAM channels in the
containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
When setting M and N Symbol Rate parameters, both
docsIfMCmtsEqamGlobCfgDownSymbolRateM and
docsIfMCmtsEqamGlobCfgDownSymbolRateN objects MUST
be present in the entry, otherwise an error code
'notCommitted' is reported in
docsIfMCmtsEqamGlobCfgDownExecutionCode of this entry.
Setting this object without setting
docsIfMCmtsEqamGlogCfgDownAnnex may end up with particular
QAM channels set rejections due to incompatible Annex
parameters, in which case the error 'errorSetFailures' is
reported in docsIfMCmtsEqamGlobCfgDownExecutionCode."
::= { docsIfMCmtsEqamGlobCfgDownEntry 8 }
docsIfMCmtsEqamGlobCfgDownSymbolRateN OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel Symbol M factor of the QAM channels in the
containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
When setting M and N Symbol Rate parameters, both
docsIfMCmtsEqamGlobCfgDownSymbolRateM and
docsIfMCmtsEqamGlobCfgDownSymbolRateN objects MUST
be present in the entry, otherwise an error code
'notCommitted' is reported in
docsIfMCmtsEqamGlobCfgDownExecutionCode of this entry."
::= { docsIfMCmtsEqamGlobCfgDownEntry 9 }
docsIfMCmtsEqamGlobCfgDownLockParams OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6) -- symbolRate(6),
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object for global configuration of Downstream
channel lock state of the PHY parameters of the QAM
channels in the containment tree of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex.
A locked PHY parameter is blocked for sets via Management
or other means such as DEPI session.
Setting a BIT to '1' locks the corresponding PHY parameter
for configuration, returning error 'wrongValue' on SET
attempts until administratively unlocked.
A set to this object is reflected in
docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock of the
QAM channels being set.
Note that setting a BIT to '0' does not necessarily grant
write access to a PHY parameter, because of existing
hardware constraints indicated in
docsIfMCmtsEqamDownstreamDevicePhyParamLock."
DEFVAL { '00000000'H }
::= { docsIfMCmtsEqamGlobCfgDownEntry 10 }
docsIfMCmtsEqamGlobCfgDownExecutionCode OBJECT-TYPE
SYNTAX INTEGER {
complete(1),
errorNoPhysIndex(2),
errorNoQAMChannels(3),
errorSetFailures(4),
errorNoCommitted(5),
warningDependencies(6),
errorOther(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the global configuration entry
execution. If different than 'none', represents the last
error condition present.
'complete' indicates the Global configuration success with
no errors.
'errorNoPhysIndex' indicates the value of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not
exist.
'errorSetFailures' indicates the global set was commit but
individual QAM channels reported errors on sets. The
counter docsIfMCmtsEqamGlobCfgDownErrorCount is
increased for each QAM channel set failure.
'errorNoCommitted' indicates the entry was not committed as
sets to the associated QAM channels due to inconsistent
PHY parameters. Few possible cases are:
- refer to the docsIfMCmtsEqamGlogCfgDownAnnex
constraints and related Annex objects as it
describes.
- setting an unique parameter with wrong syntax, leaving
the entry in 'notReady' status See
RowStatus Object
description.
'warningDependencies' indicates the command was executed
and the system may have detected dependencies. This
execution code is optional and considered a warning
rather than an error, as the management entity can have
knowledge about group dependencies prior to setting an
entry by inspecting docsIfMCmtsEqamGroupDependencyTable.
'errorOther' indicates an error condition not considered in
the above situations.
As multiple QAM channels are set only the last error
condition is maintained in case of a no 'complete'
execution status. A warning condition (e.g.,
'warningDependencies' does not override an existing
error condition (other enumeration values)."
::= { docsIfMCmtsEqamGlobCfgDownEntry 12 }
docsIfMCmtsEqamGlobCfgDownErrorsCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error cases where a QAM channel was not
successfully set. This value starts counting at zero
any time the global configuration entry is executed.
This object is reset back to zero in case of a successful
set."
::= { docsIfMCmtsEqamGlobCfgDownEntry 13 }
docsIfMCmtsEqamGlobCfgDownRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual table row entry.
In order to create an entry the object
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set
This table has 'holes' for all the read-create' objects
not specified in the setup.
An entry is set to 'active' status if at least one
read-create object of the list below is set, otherwise,
the entry is in 'notReady' status.
docsIfMCmtsEqamGlobCfgDownBandwidth
docsIfMCmtsEqamGlobCfgDownPower
docsIfMCmtsEqamGlobCfgDownModulation
docsIfMCmtsEqamGlobCfgDownInterleave
docsIfMCmtsEqamGlogCfgDownAnnex
docsIfMCmtsEqamGlobCfgDownSymbolRateM
docsIfMCmtsEqamGlobCfgDownSymbolRateN
Once an entry is active the QAM channels associated to the
docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree
are set to the parameters specified in the entry.
The Entry remains in 'active' row status and the execution
status is reported by
docsIfMCmtsEqamGlobCfgDownExecutionCode.
Setting a previously set object to a new value or
specifying an object not initially set during row creation,
sets the entry in row status 'notInService'. A set of this
object to 'active' triggers again the global configuration
action. As a rule, the EQAM device is not expected to track
old parameter values. Thus, the set to 'active' of the
entry performs the global set of all the old and new
parameters defined in the entry.
Due to the possible value 'notInService' as a valid
configuration state, this entry MUST NOT be aged out when
Row Status is 'notInService'."
::= { docsIfMCmtsEqamGlobCfgDownEntry 14 }
-- ---------------------------------------------------------------------
-- CMTS and EQAM Channel Block configuration
-- Configuration and diagnostic of block Channels.
-- This table is only for Block Channels Physical containments
-- Other configuration parameters (PHY) applicable to all channes in a
-- Block Channel are set through docsIfMCmtsEqamGlobCfgDownTable
-- ---------------------------------------------------------------------
docsIfMCmtsChannelBlockTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsChannelBlockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table configure attributes of block channels and
Controls channel Block Tests.
A channel block is an ENTITY-MIB containment of
PhysicalClass 'module' that represent an RF connector."
::= { docsIfMCmtsEqamObjects 5 }
docsIfMCmtsChannelBlockEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsChannelBlockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row entry of this table
Entries in this table are created at system
Initialization for Block Channels compliant to DRFI
Specification.
Sets in entries of this table persist after system
initialization."
INDEX { docsIfMCmtsChannelBlockPhysicalIndex }
::= { docsIfMCmtsChannelBlockTable 1 }
DocsIfMCmtsChannelBlockEntry ::= SEQUENCE {
docsIfMCmtsChannelBlockPhysicalIndex PhysicalIndex,
docsIfMCmtsChannelBlockNumberChannels Unsigned32,
docsIfMCmtsChannelBlockCfgNumberChannels Unsigned32,
docsIfMCmtsChannelBlockMute TruthValue,
docsIfMCmtsChannelBlockTestType INTEGER,
docsIfMCmtsChannelBlockTestIfIndex InterfaceIndexOrZero
}
docsIfMCmtsChannelBlockPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Physical Index of the QAM Channel Block."
::= { docsIfMCmtsChannelBlockEntry 1 }
docsIfMCmtsChannelBlockNumberChannels OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number of QAM Channels N associated to this entry."
::= { docsIfMCmtsChannelBlockEntry 2 }
docsIfMCmtsChannelBlockCfgNumberChannels OBJECT-TYPE
SYNTAX Unsigned32 (1..119)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Number of QAM Channels N' to configure for the
QAM block.
The maximum number of channels per block follows the
consideration of maximum number of digital channels in
a headend described in the DRFI specification.
As a rule N' is valid if is less or equal to N. In addition
N minimal requirements consist of even numbers and 1
(one QAM channel per Block Channel). Odd number of QAM
channels per Block Channel are of optional implementation.
A Set to an invalid value or not supported value returns
Error 'wrongValue'."
::= { docsIfMCmtsChannelBlockEntry 3 }
docsIfMCmtsChannelBlockMute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mute control object for the Block Channel
A set to this object to 'true' is reflected in
ifOperStatus set to 'down' of the QAM channels
associated to the block Channel.
The opposite, a set to this object to 'false', is not
necessarily reflected as ifOperStatus set to 'up' since
other interface conditions might prevent such status."
::= { docsIfMCmtsChannelBlockEntry 4 }
docsIfMCmtsChannelBlockTestType OBJECT-TYPE
SYNTAX INTEGER {
noTest(1),
offOthersNormal(2),
allOff(3),
onOthersOff(4),
cwOnOthersOff(5),
cwOnOthersNormal(6),
clockTest(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A set of in-service and out-of-service test modes.
The value 'noTest'(1) is the normal condition after
reinitialization where the QAM channels are expected in
operation.
'noTest'
It is also used to take out of testing mode
a QAM channel within the block.
In-service tests modes:
'offOthersNormal'
It is the condition where the QAM Channel indicated in
docsIfMCmtsChannelBlockTestIfIndex has its carrier
suppressed and the other channels in the
Block Channel are operational.
'allOff'
All QAM channels carriers in the channel block are
Suppressed.
'onOthersOff'
It is the condition where the QAM channel indicated in
docsIfMCmtsChannelBlockTestIfIndex is in operation
and the other QAM channels in the channel Block have
their carriers suppressed.
Out-of-service test modes:
'cwOnOthersOff'
It is the condition where the QAM channel indicated in
docsIfMCmtsChannelBlockTestIfIndex transmits a
continuous wave (CW) while the other QAM
channels in the channel Block have their carriers
suppressed.
'cwOnOthersNormal'
It is the condition where the QAM channel indicated
in docsIfMCmtsChannelBlockTestIfIndex transmits a
continuous wave (CW) while the other QAM channels in
the channel Block are operational.
'clockTest'
It is the condition where the QAM channel indicated in
docsIfMCmtsChannelBlockTestIfIndex transmits a sequence
of alternating -1 and 1 symbols.
This object value does not persist after system
Reinitialization.
The value of this object is meaningless if
docsIfMCmtsChannelBlockTestIfIndex is set to zero."
::= { docsIfMCmtsChannelBlockEntry 5 }
docsIfMCmtsChannelBlockTestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ifIndex of the QAM channel to perform the QAM
channel test.
A Set to a value that does not correspond to a QAM
Channel within the Block channel returns error
'wrongValue'.
A set to zero stops a current test execution."
::= { docsIfMCmtsChannelBlockEntry 6 }
-- DEPI Management objects
-- Applicable to both M-CMTS core and EQAM device
--
-- DEPI Control Table
docsIfMCmtsDepiSessionConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiSessionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Control table for the configuration of M-CMTS
Downstream Interfaces.
The M-CMTS Downstream Interface configuration information
is contained in this table.
Currently L2TPv3 is the defined tunnel mechanism for
DEPI sessions. There may be other DEPI tunnel methods
defined in the future.
The configuration of entries with
docsIfMCmtsDepiSessionConfigMethod equal to 'l2tpControl'
follows the rule below:
Only one L2TPv3 Control Plane from a M-CMTS Core IP is
established per EQAM IP host destination indicated in
docsIfMCmtsDepiSessionConfigRemoteAddr. There may be other
L2TPv3 Control Plane connections from different M-CMTSs
to the same EQAM IP host."
::= { docsIfMCmtsDepiSessionObjects 1 }
docsIfMCmtsDepiSessionConfigEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiSessionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table.
Entries are created by either management operations or
other M-CMTS applications or interfaces (e.g., ERMI), the
persistence of an entry is indicated in
docsIfMCmtsDepiSessionConfigStorage.
The DEPI connection mechanism using L2TPv3 is initiated
when an entry in this table is set to active. The
following conditions apply:
o If the M-CMTS L2TPv3 Control Connection with the remote
EQAM Host IP in docsIfMCmtsDepiSessionConfigRemoteAddr
does not exist, a DEPI L2TPv3 control Connection is
created.
o There may be cases where the control plane with the EQAM
IP host exists or is in progress, (e.g., a previously
created entry with same EQAM IP host), thus the M-CMTS
MUST avoid multiple L2TP Control Connection State
machines.
o DEPI L2TPv3 sessions are created based on the TSID
value. Only the first entry with row status 'active'
with a particular TSID value will try to establish a
L2TPv3 session. Other entries with same TSID value
return state of 'depiSessionError' in
docsIfMCmtsDepiSessionInfoState.
Relationships with the DOCSIS MAC domain IfStackTable:
This control considers the ability of the M-CMTS to use a
manager-specified Downstream interface value
for the configuration of the DOCSIS MAC domain downstream
interfaces of the M-CMTS architecture.
o When docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex
is a non-zero value the value of
docsIfMCmtsDepiSessionConfigCableMacLayerIfIndex MUST be
an existing DOCSIS MAC layer interface.
o If an entry in this table already exists for the specified
docsIfMCmtsDepiSessionConfigCableDownstreamIfIndex,
or corresponds to an ifIndex signaled as
'integrated' in docsIfMCmtsDownstreamType a
newly created entry set to active is rejected and
reported in docsIfMCmtsDepiSessionInfoState as
'invalidDSInterfaceValue'.
o The M-CMTS accepts or rejects the creation of a new
table entry based on the possibility of adding a new
Downstream interface to the MAC domain. On success it
is reported in docsIfMCmtsDownstreamType as
'depiSession'.
Relationship with M-CMTS Downstream Interface tables:
Setting an entry to active creates or updates (when
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex is
provided in the row creation; see the object description
for details) the corresponding entry in the following
tables:
ifTable,
docsIfDownstreamChannelTable,
docsIfMCmtsCoreDownstreamTable/
docsIfMCmtsEqamDownstreamTable,
docsIfMCmtsCoreDownstreamTable,
docsIfMCmtsDepiSessionInfoTable, and
docsIfMCmtsDepiSessionStatsTable
In the EQAM device this table is normally created by the
M-CMTS Core initiated DEPI session, although manual
configuration may be supported, with the difference that
EQAM devices are not required to initiate DEPI sessions.
EQAM device Operation of configured entries is not
detailed in this MIB module."
INDEX { docsIfMCmtsDepiSessionConfigIndex }
::= { docsIfMCmtsDepiSessionConfigTable 1 }
DocsIfMCmtsDepiSessionConfigEntry ::= SEQUENCE {
docsIfMCmtsDepiSessionConfigIndex Unsigned32,
docsIfMCmtsDepiSessionConfigCableMacIfIndex InterfaceIndexOrZero,
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex InterfaceIndexOrZero,
docsIfMCmtsDepiSessionConfigAddrType InetAddressType,
docsIfMCmtsDepiSessionConfigLocalAddr InetAddress,
docsIfMCmtsDepiSessionConfigRemoteAddr InetAddress,
docsIfMCmtsDepiSessionConfigL2TPv3HeaderType INTEGER,
docsIfMCmtsDepiSessionConfigMethod INTEGER,
docsIfMCmtsDepiSessionConfigTSID Unsigned32,
docsIfMCmtsDepiSessionConfigDEPIMode INTEGER,
docsIfMCmtsDepiSessionConfigRsrcAllocReq Unsigned32,
docsIfMCmtsDepiSessionConfigCinPhbIdPolicy SnmpTagValue,
docsIfMCmtsDepiSessionConfigSyncEnabled TruthValue,
docsIfMCmtsDepiSessionConfigSyncInterval Unsigned32,
docsIfMCmtsDepiSessionConfigPhyParamsFlag BITS,
docsIfMCmtsDepiSessionConfigChannelFrequency Unsigned32,
docsIfMCmtsDepiSessionConfigChannelModulation INTEGER,
docsIfMCmtsDepiSessionConfigChannelInterleave INTEGER,
docsIfMCmtsDepiSessionConfigChannelPower TenthdBmV,
docsIfMCmtsDepiSessionConfigChannelAnnex INTEGER,
docsIfMCmtsDepiSessionConfigChannelSymbolRateM Unsigned32,
docsIfMCmtsDepiSessionConfigChannelSymbolRateN Unsigned32,
docsIfMCmtsDepiSessionConfigChannelOutputRate Unsigned32,
docsIfMCmtsDepiSessionConfigChannelBurstSize Unsigned32,
docsIfMCmtsDepiSessionConfigStorage StorageType,
docsIfMCmtsDepiSessionConfigRowStatus RowStatus,
docsIfMCmtsDepiSessionConfigChannelId Unsigned32
}
docsIfMCmtsDepiSessionConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for entries in this conceptual table."
::= { docsIfMCmtsDepiSessionConfigEntry 1 }
docsIfMCmtsDepiSessionConfigCableMacIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the MAC domain (ifType docsCableMaclayer)on
which the DEPI Session is being set for an existing M-CMTS
Downstream interface.
This object MUST be set to a valid DOCSIS MAC layer
interface in order to make the entry active."
::= { docsIfMCmtsDepiSessionConfigEntry 2 }
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the Downstream channel index on which the DEPI
Session is being set.
The set of this object is optional. When this object is not
specified the M-CMTS is expected to generate an internal
value with its corresponding ifStackTable dependencies at
the time or making this entry active.
When setting this value to a non-zero value, this object
and docsIfMCmtsDepiSessionConfigCableMacIfIndex MUST
correspond to a valid Cable and MCmtsDownstream interfaces
pair from the ifStackTable.
A set to an ifIndex corresponding to an ifType 128
(docsCableDownstream Interface) won't allow to turn the
entry active."
DEFVAL { 0 }
::= { docsIfMCmtsDepiSessionConfigEntry 3 }
docsIfMCmtsDepiSessionConfigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of InetAddress for
docsIfMCmtsDepiSessionConfigLocalAddr and
docsIfMCmtsDepiSessionConfigRemoteAddr."
DEFVAL { ipv4 }
::= { docsIfMCmtsDepiSessionConfigEntry 4 }
docsIfMCmtsDepiSessionConfigLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The InetAddress of the local entity the DEPI Session
is set."
DEFVAL { ''H }
::= { docsIfMCmtsDepiSessionConfigEntry 5 }
docsIfMCmtsDepiSessionConfigRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The InetAddress of the remote peer the DEPI Session
is set."
DEFVAL { ''H }
::= { docsIfMCmtsDepiSessionConfigEntry 6 }
docsIfMCmtsDepiSessionConfigL2TPv3HeaderType OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
udp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of L2TPv3 header being configured for
the DEPI session.
The value 'ip' means L2TPv3 Header Over IP
The value 'udp' means L2TPv3 Header Over UDP. A M-CMTS Core
initiates a DEPI session with L2TPv3 over UDP using the
port number 1701 as destination port. The EQAM replies
may modify its UDP source port as indicated in the L2TPv3
RFC to convey the DEPI specification option of mapping
DEPI flows to a QAM Channel within an EQAM."
DEFVAL { udp }
::= { docsIfMCmtsDepiSessionConfigEntry 7 }
docsIfMCmtsDepiSessionConfigMethod OBJECT-TYPE
SYNTAX INTEGER {
other(1),
l2tpControl(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the DEPI Tunnel mechanism used for the DEPI
session. Currently only 'l2tpControl is supported.
The value 'other' is used to indicate other means."
::= { docsIfMCmtsDepiSessionConfigEntry 8 }
docsIfMCmtsDepiSessionConfigTSID OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TSID to be associated to the DEPI Session.
TSID is a 16-bit unsigned integer value configured per QAM
channel in the EQAM device and serves as a QAM channel
identifier at several network levels.
When this object is set to 0, at the most the L2TPv3
Control Plane of the DEPI session is established but not
DEPI L2TPv3 Session itself. It means, there might be
the situations where the DEPI Control Plane already exists
e.g., a different DEPI session to same EQAM device. In this
case the new entry will no trigger the DEPI Control Plane
creation. The TSID value zero may accomplish functions
like testing of DEPI Control Plane connectivity without
launching the DEPI Session itself; DLM over a M-CMTS
Core - EQAM devices path with no Active sessions for
administrative purposes."
::= { docsIfMCmtsDepiSessionConfigEntry 9 }
docsIfMCmtsDepiSessionConfigDEPIMode OBJECT-TYPE
SYNTAX INTEGER {
dmpt(1),
psp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DEPI mode of operation of this entry
'dmpt' indicates DOCSIS MPT mode (D-MPT)
'psp' indicates Packet Streaming Protocol."
::= { docsIfMCmtsDepiSessionConfigEntry 10 }
docsIfMCmtsDepiSessionConfigRsrcAllocReq OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to docsIfMCmtsDepiRsrcAllocIndex of
docsIfMCmtsDepiRsrcAllocTable used in
the DEPI Session setup by the M-CMTS Core to configure
EQAM PHBIDs. M-CMTS uses only the PHBIDs from the
docsIfMCmtsDepiRsrcAllocTable for the DEPI resource
allocation request, ignoring DEPI Flow ID values and
UDP Ports.
For the EQAM this object has no meaning as it is set to
zero always."
DEFVAL { 0 }
::= { docsIfMCmtsDepiSessionConfigEntry 11 }
docsIfMCmtsDepiSessionConfigCinPhbIdPolicy OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A list of tags to reference CIN PHB policies in
docsIfMCmtsDepiPhbPolicyTable for this DEPI session.
This object is not meaningful for the EQAM, and reports
a zero length octet string."
::= { docsIfMCmtsDepiSessionConfigEntry 12 }
docsIfMCmtsDepiSessionConfigSyncEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the DOCSIS Sync message handling at the Edge QAM
based upon PSP or DMPT mode of operation.
In MPT mode 'true' indicates the EQAM MUST perform
Sync TimeStamp correction. In PSP mode 'true' indicates
the EQAM MUST insert DOCSIS Sync messages."
REFERENCE "DEPI Specification Section 6.5"
DEFVAL { false }
::= { docsIfMCmtsDepiSessionConfigEntry 13 }
docsIfMCmtsDepiSessionConfigSyncInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..1000)
UNITS "docsisSyncSteps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the time nominal time interval for
EQAM to insert DOCSIS Sync messages when operating
in PSP mode. In DMPT mode this value is ignored.
The unit reference of this object is steps of 200 usec.
This object range covers the EQAM required support of
DOCSIS Sync interval from 2 msec to 200 msec."
DEFVAL { 1000 }
::= { docsIfMCmtsDepiSessionConfigEntry 14 }
docsIfMCmtsDepiSessionConfigPhyParamsFlag OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When configuring an entry, DOCSIS PHY parameters may
be set directly or default values are used to populate
the entry.
This object indicates which PHY parameter sets need to be
sent by the M-CMTS Core in the DEPI session request.
A BIT position set to '1' indicates the PHY parameter is
set during the DEPI session establishment.
In the EQAM indicates the PHY parameters set by the M-CMTS
core during the DEPI Session establishment procedure."
DEFVAL { '00000000'H }
::= { docsIfMCmtsDepiSessionConfigEntry 15 }
docsIfMCmtsDepiSessionConfigChannelFrequency OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel frequency for the Downstream DEPI Session.
A DEPI Session establishment success will update the
corresponding ifIndex entry of docsIfChannelFrequency
with this entry value if provided in entry creation,
or the EQAM DEPI Frequency parameter advertised
during the DEPI session negotiation."
REFERENCE "DEPI specification"
DEFVAL { 0 }
::= { docsIfMCmtsDepiSessionConfigEntry 16 }
docsIfMCmtsDepiSessionConfigChannelModulation OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
qam64(3),
qam256(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel modulation for the Downstream DEPI Session.
A DEPI Session establishment success will update the
corresponding ifIndex entry of docsIfDownChannelModulation
with this entry value if provided in entry creation,
or the EQAM DEPI Modulation parameter advertised
during the DEPI session negotiation."
DEFVAL { unknown }
::= { docsIfMCmtsDepiSessionConfigEntry 17 }
docsIfMCmtsDepiSessionConfigChannelInterleave OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
taps8Increment16(3),
taps16Increment8(4),
taps32Increment4(5),
taps64Increment2(6),
taps128Increment1(7),
taps12increment17(8),
tabs128increment2(9), -- non RFIv2 MIB 2670
-- interleave modes
tabs128increment3(10),
tabs128increment4(11),
tabs128increment5(12),
tabs128increment6(13),
tabs128increment7(14),
tabs128increment8(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel Interleaver for the Downstream DEPI Session.
A DEPI Session establishment success will update the
corresponding ifIndex entry of docsIfDownChannelInterleave
with this entry value if provided in entry creation,
or the EQAM DEPI interleaver parameter advertised
during the DEPI session negotiation."
DEFVAL { unknown }
::= { docsIfMCmtsDepiSessionConfigEntry 18 }
docsIfMCmtsDepiSessionConfigChannelPower OBJECT-TYPE
SYNTAX TenthdBmV
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel power level for the Downstream DEPI Session.
A DEPI Session establishment success will update the
corresponding ifIndex entry of docsIfDownChannelPower
with this entry value if provided in entry creation,
or the EQAM DEPI power level parameter advertised
during the DEPI session negotiation."
DEFVAL { 0 }
::= { docsIfMCmtsDepiSessionConfigEntry 19 }
docsIfMCmtsDepiSessionConfigChannelAnnex OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
annexA(3),
annexB(4),
annexC(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel J.83 Annex type for the Downstream DEPI
Session.
A DEPI Session establishment success will update the
corresponding ifIndex entry of docsIfDownChannelAnnex
with this entry value if provided in entry creation,
or the EQAM DEPI power level parameter advertised
during the DEPI session negotiation. Also the value
of docsIfDownChannelWidth is set according to
the J.83 specification."
DEFVAL { unknown }
::= { docsIfMCmtsDepiSessionConfigEntry 20 }
docsIfMCmtsDepiSessionConfigChannelSymbolRateM OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value M for the estimation of the DS Symbol Rate
as (10.24 MHz )*M/N"
DEFVAL { 1 }
::= { docsIfMCmtsDepiSessionConfigEntry 21 }
docsIfMCmtsDepiSessionConfigChannelSymbolRateN OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value N for the estimation of the DS Symbol Rate
as (10.24 MHz )*M/N"
DEFVAL { 1 }
::= { docsIfMCmtsDepiSessionConfigEntry 22 }
docsIfMCmtsDepiSessionConfigChannelOutputRate OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The percentage of the maximum output rate for the
aggregated traffic that is being sent though this
M-CMTS Downstream interface to the QAM channel
associated with this DEPI session.
Using a value lower than 100% of the QAM channel
configured payload rate prevents the build up of
a queue delay when MPEG-TS nulls are added in the
presence of jitter in the CIN.
This object is meaningful only to the M-CMTS core.
The EQAM device reports a value 0."
REFERENCE "DEPI M-CMTS Core Output Rate"
DEFVAL { 99 }
::= { docsIfMCmtsDepiSessionConfigEntry 23 }
-- TBD IfSpeed Values relationship to DEPI tunnel MTU
docsIfMCmtsDepiSessionConfigChannelBurstSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum burst size for the aggregate output rate
of this M-CMTS Downstream Interface. The default value
of this object corresponds to 3 M-CMTS Core payload
MTUs.
This value has no meaning for the EQAM device and reports
a value of 0."
::= { docsIfMCmtsDepiSessionConfigEntry 24 }
docsIfMCmtsDepiSessionConfigStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage realization of the entry.
No columnar values can be changed if the StorageType of
an entry is 'permanent'."
::= { docsIfMCmtsDepiSessionConfigEntry 25 }
docsIfMCmtsDepiSessionConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual table row entry.
In order to set an entry to the 'active' status,
the MIB objects below must be set to proper values:
Other objects default values are used for the DEPI session
docsIfMCmtsDepiSessionConfigCableMacIfIndex
docsIfMCmtsDepiSessionConfigRemoteAddr
docsIfMCmtsDepiSessionConfigTSID
docsIfMCmtsDepiSessionConfigDEPIMode
docsIfMCmtsDepiSessionConfigRsrcAllocReq
docsIfMCmtsDepiSessionConfigMethod
docsIfMCmtsDepiSessionConfigPhyFlag
docsIfMCmtsDepiSessionConfigChannelId must be unique within
the MAC sublayer domain in order to set this entry to
active,
PHY parameters listed below are not required to be
populated in this table, then default values are used to
populate the entry or implementation may opt to not
instantiate those objects.
docsIfMCmtsDepiSessionConfigChannelFrequency
docsIfMCmtsDepiSessionConfigChannelModulation
docsIfMCmtsDepiSessionConfigChannelInterleave
docsIfMCmtsDepiSessionConfigChannelPower
docsIfMCmtsDepiSessionConfigChannelAnnex
docsIfMCmtsDepiSessionConfigSyncInterval
When the row entry is 'active' the DEPI tunnel control
and/or the DEPI session is established. Retries and
timeouts are proper of the DEPI Tunnel protocol used.
For L2TPv3 while the entry is active the M-CMTS must
continue to set the DEPI session and log the respective
errors for unsuccessful operations.
Relationship with the IfTable ifAdminStatus
Setting ifAdminStatus from ifTable to the interface pointed
by this entry
(docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to
'down' sets this entry Row Status to 'notInService'. A set
to ifAdminStatus to 'up' while in 'down' state sets back
the Row Status to 'active'.
The opposite is not true: a set to this object to 'active'
when previously 'notInService' and while ifAdmiStatus is
'down' returns an error 'inconsistentValue', such only one
point of contact is needed to enable and disable the
interface.
Setting this object to 'notInService' while ifAdminStatus is
'down' sets ifOperStatus to 'down'.
Setting this entry to 'notInService' will tear down the
DEPI session. DEPI Tunnel Control teardown in the absence
of sessions is Tunnel protocol dependent, e.g., for L2TPv3
Control Connections may use tunnel Idle Timeout objects
defined in L2TP-MIB.
Due to the dependencies of IfAdminStatus and this table row
Status, M-CMTS Core and EQAM devices MUST not age out
entries with Row Status 'notInService' and
docsIfMCmtsDepiSessionInfoState in
'ifAdmiStatusSetToDown'."
::= { docsIfMCmtsDepiSessionConfigEntry 26 }
docsIfMCmtsDepiSessionConfigChannelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The downstream channel identification of this M-CMTS
Downstream interface.
During entry creation The M-CMTS Core assigns a
Channel ID if this object is not provided.
When this object is set to a Channel ID value already in
use by a different downstream interface within the same
MAC domain the error 'inconsistentValue' error is
returned if this entry is active."
::= { docsIfMCmtsDepiSessionConfigEntry 27 }
docsIfMCmtsDepiSessionInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides M-CMTS Downstream Interface with
DEPI session information related to the DEPI session
configuration process."
::= { docsIfMCmtsDepiSessionObjects 2 }
docsIfMCmtsDepiSessionInfoEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiSessionInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table.
Entries in this table are created when a DEPI Session
Configuration Table entry becomes active. Both entries
are linked through
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex, which is
equivalent to ifIndex from other M-CMTS Downstream
interface tables."
INDEX { ifIndex }
::= { docsIfMCmtsDepiSessionInfoTable 1 }
DocsIfMCmtsDepiSessionInfoEntry ::= SEQUENCE {
docsIfMCmtsDepiSessionInfoCfgIndex Unsigned32,
docsIfMCmtsDepiSessionInfoUdpPort InetPortNumber,
docsIfMCmtsDepiSessionInfoMaxPayload Unsigned32,
docsIfMCmtsDepiSessionInfoPathPayload Unsigned32,
docsIfMCmtsDepiSessionInfoIncludeDOCSISMsgs TruthValue,
docsIfMCmtsDepiSessionInfoRsrcAllocResp Unsigned32,
docsIfMCmtsDepiSessionInfoConnCtrlID Unsigned32,
docsIfMCmtsDepiSessionInfoEQAMSessionID Unsigned32,
docsIfMCmtsDepiSessionInfoOwner INTEGER,
docsIfMCmtsDepiSessionInfoState INTEGER,
docsIfMCmtsDepiSessionInfoErrorCode INTEGER,
docsIfMCmtsDepiSessionInfoCreationTime TimeStamp,
docsIfMCmtsDepiSessionInfoStorage StorageType
}
docsIfMCmtsDepiSessionInfoCfgIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the docsIfMCmtsDepiSessionConfigTable index
(docsIfMCmtsDepiSessionConfigIndex) associated to this
M-CMTS Downstream Interface Entry."
::= { docsIfMCmtsDepiSessionInfoEntry 1 }
docsIfMCmtsDepiSessionInfoUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Port reported by the EQAM when the DEPI session
uses the L2TPv3 Header Over UDP.
This object reports a value 0 when the DEPI session is
running with the L2TPv3 Session IP Header.
This port number is negotiated between the M-CMTS Core and
the EQAM according to the L2TPv3 RFC."
::= { docsIfMCmtsDepiSessionInfoEntry 2 }
docsIfMCmtsDepiSessionInfoMaxPayload OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MTU negotiated between the M-CMTS Core and the
EQAM during the DEPI session establishment process.
The local payload MTU is known from the IfEntry of this
M-CMTS Downstream Interface. It considers the header
subtractions as indicated in the DEPI specification."
REFERENCE
"DEPI specification, Signaling
DEPI specification Annex A"
::= { docsIfMCmtsDepiSessionInfoEntry 3 }
docsIfMCmtsDepiSessionInfoPathPayload OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MTU traversing the CIN from M-CMTS Core to the
EQAM. This calculated by the M-CMTS core by procedures such
MTU discovery as described in the DEPI specification."
REFERENCE "DEPI specification, Network MTU"
::= { docsIfMCmtsDepiSessionInfoEntry 4 }
docsIfMCmtsDepiSessionInfoIncludeDOCSISMsgs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports if the M-CMTS includes DOCSIS MAP messages
and other MAC Management messages in the Downstream
interface entry associated with this DEPI control entry.
The CMTS determines weather the M-CMTS Donwstream Interface
includes DOCSIS messages as part of the DEPI payload."
DEFVAL { false }
::= { docsIfMCmtsDepiSessionInfoEntry 5 }
docsIfMCmtsDepiSessionInfoRsrcAllocResp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the M-CMTS core a reference to
docsIfMCmtsDepiRsrcAllocIndex of
docsIfMCmtsDepiRsrcAllocTable as reported by the EQAM
during the DEPI session establishment process.
The number of PHBIDs in the entries referenced in
docsIfMCmtsDepiSessionConfigRsrcAllocReq and this object
may differ if the EQAM Host IP signals a partial list of
PBHIDs during the DEPI session establishment.
In the EQAM a value 0 indicates no reference to
docsIfMCmtsDepiRsrcAllocTable. A non-zero value indicates
the value of docsIfMCmtsDepiRsrcAllocIndex in
docsIfMCmtsDepiRsrcAllocTable as being signaled by the EQAM
to the M-CMTS Core."
DEFVAL { 0 }
::= { docsIfMCmtsDepiSessionInfoEntry 6 }
docsIfMCmtsDepiSessionInfoConnCtrlID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the DEPI Tunnel Connection Control Identifier
For L2TPv3 this corresponds to CCID."
::= { docsIfMCmtsDepiSessionInfoEntry 7 }
docsIfMCmtsDepiSessionInfoEQAMSessionID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the DEPI Session Identifier associated to the
EQAM IP host. In the M-CMTS it corresponds to the L2TPv3
Remote Session ID, while in the EQAM indicates the local
Session ID. This object in conjunction with the Connection
Control ID identifies the DEPI session."
::= { docsIfMCmtsDepiSessionInfoEntry 8 }
docsIfMCmtsDepiSessionInfoOwner OBJECT-TYPE
SYNTAX INTEGER {
management(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creation method of the entry. Applicable to both
M-CMTS Core and EQAM devices.
'management'
Indicates the entry was created via a direct
configuration management such as SNMP or command line.
'dynamic'
Indicates the entry was created via a mechanism
different of user management, e.g., auto discovery or
dynamic addition with the assistance of other
Interfaces like ERMI.
Writable columnar values of entries with this object set
to 'dynamic' should not be changed via management
operations. An attempt to do so returns an SNMP error
'notWritable'."
::= { docsIfMCmtsDepiSessionInfoEntry 9 }
docsIfMCmtsDepiSessionInfoState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
depiSessionUp(2),
depiSessionError(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A high level state of the DEPI session.
'depiSessionUp'
Indicates the DEPI session is UP and able to pass
traffic.
'depiSessionError'
Indicates the DEPI session encountered
an error and the DEPI session was disconnected or
never reached the session connection state.
docsIfMCmtsDepiSessionInfoErrorCode indicates possible
reasons for the error conditions."
::= { docsIfMCmtsDepiSessionInfoEntry 10 }
docsIfMCmtsDepiSessionInfoErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
invalidMACInterfaceValue(2),
invalidDSInterfaceValue(3),
noResourcesForDSInterfaceIndex(4),
l2tpv3Error(5),
ifAdminStatusSetToDown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error Code raised when docsIfMCmtsDepiSessionInfoState
is 'depiSessionError'
'invalidMACInterfaceValue'
Indicates wrong assignment of the M-CMTS MAC interface
ifIndex.
'invalidDSInterfaceValue'
Indicates wrong assignment of the M-CMTS Downstream
interface ifIndex
'noResourcesForDSInterfaceIfIndex'
Indicates the M-CMTS Core has no more resources to
assign a session to this entry.
'l2tpv3Error'
An L2TPv3 StopCCN or CDN message was issued
'ifAdminStatusSetToDown'
Indicates the ifAdminStatus was set to down and the
session was torn down. More details are in the Row
Status and ifAdminStatus relationship, described in
docsIfMCmtsDepiSessionConfigRowStatus.
More detail state may be provided by the proper DEPI tunnel
Mechanism, e.g., L2TP-MIB l2tpTunnelStatsEntry."
::= { docsIfMCmtsDepiSessionInfoEntry 11 }
docsIfMCmtsDepiSessionInfoCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUptime when the entry was turned active."
::= { docsIfMCmtsDepiSessionInfoEntry 12 }
docsIfMCmtsDepiSessionInfoStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The storage realization of the entry.
This object value is the same as the corresponding
entry of docsIfMCmtsDepiSessionInfoStorage."
::= { docsIfMCmtsDepiSessionInfoEntry 13 }
-- DEPI Session Resource Allocation Table
-- Sets DEPI FlowIds policies to map DOCSIS Packets to DEPI Flow IDs
docsIfMCmtsDepiRsrcAllocTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiRsrcAllocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing PHBIDs Resources used for DEPI
applications.
At the M-CMTS core these entries contain information
about the mapping of egress traffic to PHIDs and DEPI flow
IDs also known as DEPI payload encapsulation.
For the M-CMTS Core there are two type of entries:
o One set of entries is a preconfigured list of PHBIDs
used for M-CMTS requests to EQAM IP Host, e.g., the MIB
object docsIfMCmtsDepiSessionConfigRsrcAllocReq
references those type of entry sets.
In those entries the values of
docsIfMCmtsDepiRsrcAllocUdpPort,
docsIfMCmtsDepiRsrcAllocFlowId and
docsIfMCmtsDepiRsrcAllocPolicyScnTags
are ignored by the M-CMTS.
o The second set of entries has the responses from the EQAM
IP host to the M-CMTS when the DEPI session request is
successful. The object
docsIfMCmtsDepiSessionConfigPhbIdResp in
docsIfMCmtsDepiSessionConfigTable references an entry of
this type.
The EQAM MAY implement this table to configure the
different queue prioritization of the DEPI flow IDs, PHBIDs
and UDP ports triplet used in the DEPI Resource allocation
response to the M-CMTS. If this table is not implemented by
the EQAM device the object
docsIfMCmtsDepiSessionInfoRsrcAllocResp is
set to zero, and the DEPI session Resource Allocation
response is vendor specific. Also the EQAM device MAY
implement this table as read-only for the purpose of
debugging the DEPI Resource Allocation Responses sent to
the M-CMTS core."
::= { docsIfMCmtsDepiSessionObjects 3 }
docsIfMCmtsDepiRsrcAllocEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiRsrcAllocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table.
At minimum two entries for docsIfMCmtsDepiRsrcAllocSeq
(two Flow ID entries) per docsIfMCmtsDepiRsrcAllocIndex
value are needed for DEPI PSP mode.
When the docsIfMCmtsDepiRsrcAllocIndex is used for DMPT
mode one flow Id entry value is required.
The PHBIDs contained in this entry are expanded with the
tags of docsIfMCmtsDepiRsrcAllocPolicySCNTags to indicate
the association of PSP packets attributes such as DOCSIS MAPS,
DOCSIS MAC messages and DOCSIS Service Flows to a DEPI
Flow ID. Thus, the EQAM IP Host uses those DEPI flow IDs to
prioritize the QAM channel traffic."
INDEX {
docsIfMCmtsDepiRsrcAllocIndex,
docsIfMCmtsDepiRsrcAllocSeq
}
::= { docsIfMCmtsDepiRsrcAllocTable 1 }
DocsIfMCmtsDepiRsrcAllocEntry ::= SEQUENCE {
docsIfMCmtsDepiRsrcAllocIndex Unsigned32,
docsIfMCmtsDepiRsrcAllocSeq Unsigned32,
docsIfMCmtsDepiRsrcAllocPhbId Unsigned32,
docsIfMCmtsDepiRsrcAllocFlowId Unsigned32,
docsIfMCmtsDepiRsrcAllocUdpPort InetPortNumber,
docsIfMCmtsDepiRsrcAllocPolicyScnTags SnmpTagValue,
docsIfMCmtsDepiRsrcAllocStorage StorageType,
docsIfMCmtsDepiRsrcAllocRowStatus RowStatus
}
docsIfMCmtsDepiRsrcAllocIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first index of this table.
Multiple DEPI Flow Ids are within a
docsIfMCmtsDepiRsrcAllocIndex value."
::= { docsIfMCmtsDepiRsrcAllocEntry 1 }
docsIfMCmtsDepiRsrcAllocSeq OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sequence index for entries within the same
docsIfMCmtsDepiRsrcAllocIndex value.
EQAM IP Host may reply with less PHBIDs than requested,
then, the M-CMTS Core skips the sequence index of missing
PHBIDs when creating the Resource Allocation entry
response.
As a rule of thumb this object has the minimal queuing
priority information for DEPI flows treatment in the EQAM.
The lowest sequence value indicates the DEPI Flow ID with
the highest priority treatment at the EQAM (e.g., DOCSIS
MAC messages should be allocated to that flow) and the
highest sequence number indicates the DEPI Flow ID with the
lowest priority."
::= { docsIfMCmtsDepiRsrcAllocEntry 2 }
docsIfMCmtsDepiRsrcAllocPhbId OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PHB identifier (per-Hub-Behavior ID) associated to
this entry.
In PSP a minimum of two PHBIDs for two flow IDs corresponds
to PHBIDs EF and BE. BE is the PHBID for the one Flow ID
PHBID required in DMPT mode."
::= { docsIfMCmtsDepiRsrcAllocEntry 3 }
docsIfMCmtsDepiRsrcAllocFlowId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Flow ID value reported in the Resource Allocation
Response for the corresponding PHBID."
DEFVAL { 0 }
::= { docsIfMCmtsDepiRsrcAllocEntry 4 }
docsIfMCmtsDepiRsrcAllocUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP Port reported by the Resource Allocation
Response for the corresponding PHBID in this table."
DEFVAL { 0 }
::= { docsIfMCmtsDepiRsrcAllocEntry 5 }
docsIfMCmtsDepiRsrcAllocPolicyScnTags OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A list of Service Class Names (SCN) tags associated to
PHBID/Flow IDs.
The policies associated to each DEPI Flow ID of this table
allow the mapping of specific DOCSIS Service Flows well
distinguished by SCN.
The SCN encoding does not include the null terminated
octets as DOCSIS specify for other configuration mechanisms
such as Cable Modem config files encoding.
This object is applicable to M-CMTS core but not to
EQAM devices.
In D-MPT mode no tags are needed since all DOCSIS traffic
is mapped to same DEPI Flow ID, thus this object is set to
zero-length string (no tag) or ignored.
In PSP mode DOCSIS MAPS, DOCSIS MAC messages and PacketCable
1.0/1.5 voice traffic are mapped to the highest priority DEPI
Flow ID (lower sequence number in the Resource allocation
response)
If this object is empty (no tag), the default policy is
used.
In PSP mode the default policy consists to assign the DEPI
Flow ID of the lowest priority (highest sequence number) to
the DOCSIS traffic. DOCSIS Traffic not matched to a policy
Tag is mapped to the default policy Flow ID.
In PSP mode the docsIfMCmtsDepiRsrcAllocSeq values pointed
in a M-CMTS Core Resource Allocation Request has the
preconfigured Policy Tags to map DOCSIS traffic to DEPI
Flow IDs. When the Resource Allocation response from the
EQAM is received, it could have same or less of the PHBIDs
requested, and the PHBID references could be in a different
order sequence. Therefore, the M-CMTS Core MUST accommodate
the policy Tags initial configuration to the EQAM order
sequence and number of PHBIDs.
For example:
A Resource Allocation Request:
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 EF VoiceGold*
2 AF VideoConference
3 BE empty - no tag -
* - PCMM voice service based on SCN, no PacketCable 1.0/1.5
voice
The EQAM Resource Allocation response:
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 EF 6 50201
2 BE 7 50202
It is vendor specific to re-allocate the policy Tags in the
case of less DEPI Flow IDs in the Resource Allocation
response than in the requests. In the example PHBID AF
policy tag could be assigned to either Flow ID 6 or 7
Final Resource Allocation Tag reordering
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 EF 6 50201 VoiceGold
VideoConference
2 BE 7 50202 empty - no tag -
Change of sequence in the response example:
A Resource Allocation Request:
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 0x30 VoiceGold
2 0x20 VideoConference
3 0x10 empty - no tag -
* - PCMM voice service based on SCN, no PacketCable 1.0/1.5 voice
The EQAM Resource Allocation response:
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 0x20 6 50201
2 0x10 7 50202
3 0x30 8 50203
Final Resource Allocation Tag reordering
Seq Num PHBID Flow ID UDP Port Policy Tags
-------- ------ -------- --------- ------------
1 0x20 6 50201 VoiceGold
2 0x10 7 50202 VideoConference
3 0x30 8 50203 empty - no tag -"
DEFVAL { "" }
::= { docsIfMCmtsDepiRsrcAllocEntry 6 }
docsIfMCmtsDepiRsrcAllocStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage realization of this entry.
Entries corresponding to a Resource Allocation Response
are of type 'volatile' and do not persist.
Entries set as 'permanent' need not write access
for its read-create type base objects.
All entries within the same docsIfMCmtsDepiRsrcAllocIndex
share the same StorageType value."
DEFVAL { volatile }
::= { docsIfMCmtsDepiRsrcAllocEntry 7 }
docsIfMCmtsDepiRsrcAllocRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Administratively created entries need only
set the value of docsIfMCmtsDepiRsrcAllocPhbId to become
'active'. All other read-create columnar objects are not
instantiated or set to default values if not set during
row creation."
::= { docsIfMCmtsDepiRsrcAllocEntry 8 }
-- QOS extensions for M-CMTS architecture
-- Policies for mapping PSP packets to SF policies
docsIfMCmtsDepiSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides DEPI Session statistics for the
M-CMTS Downstream Interface."
::= { docsIfMCmtsDepiSessionObjects 4 }
docsIfMCmtsDepiSessionStatsEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table."
INDEX { ifIndex }
::= { docsIfMCmtsDepiSessionStatsTable 1 }
DocsIfMCmtsDepiSessionStatsEntry ::= SEQUENCE {
docsIfMCmtsDepiSessionInfoOutOfSequencePkts Counter32
}
docsIfMCmtsDepiSessionInfoOutOfSequencePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of DEPI session packets out of sequence.
It is vendor dependent the re-sequence of DEPI packets.
EQAM Implementations that do not re-sequence DEPI
packets also increase the value of ifInDiscards
for the respective entry.
This counter is meaningful for M-CMTS Downstream
interfaces configured in PSP mode. This object
is not instantiated for D-MPT mode of operation."
::= { docsIfMCmtsDepiSessionStatsEntry 1 }
-- DEPI Latency Measurement (DLM)
docsIfMCmtsDepiSessionCinLatency OBJECT IDENTIFIER
::= { docsIfMCmtsDepiSessionObjects 5 }
docsIfMCmtsDepiSessionCinLatencyInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..420)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval used to measure periodically the CIN
latency per DEPI session.
Active measurement of CIN latency applies to active DEPI
sessions only.
This object is constrained to 420 seconds to prevent
the Master Clock counter overruns.
A value zero indicates no CIN latency measurements to be
performed."
::= { docsIfMCmtsDepiSessionCinLatency 1 }
docsIfMCmtsDepiSessionCinLatencyThrshld OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "MasterClockTicks"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CIN latency threshold measured in DOCSIS Master clock
ticks to be reported as an event when exceeded.
The DOCSIS Master Clock is the 10.24 MHz reference clock."
::= { docsIfMCmtsDepiSessionCinLatency 2 }
docsIfMCmtsDepiSessionCinEventLevel OBJECT-TYPE
SYNTAX INTEGER {
emergency(1),
alert(2),
critical(3),
error(4),
warning(5),
notice(6),
information(7),
debug(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired event level to report in case of the CIN
latency threshold being exceeded."
::= { docsIfMCmtsDepiSessionCinLatency 3 }
docsIfMCmtsDepiSessionCinLastValue OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "MasterClockTicks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CIN latency value measured for the DEPI session
pointed by docsIfMCmtsDepiSessionCinLastValueIfIndex."
::= { docsIfMCmtsDepiSessionCinLatency 4 }
docsIfMCmtsDepiSessionCinLastValueIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the DEPI Session associated to the CIN
latency value pointed measured for the DEPI session
pointed by docsIfMCmtsDepiSessionCinLastValue."
::= { docsIfMCmtsDepiSessionCinLatency 5 }
docsIfMCmtsDepiSessionCinLatencyValueLastTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime value of the last time the object
docsIfMCmtsDepiSessionCinLastValue was updated."
::= { docsIfMCmtsDepiSessionCinLatency 6 }
docsIfMCmtsDepiSessionCinLatencyPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiSessionCinLatencyPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides accumulative measurements of the CIN
latency on the network."
::= { docsIfMCmtsDepiSessionObjects 6 }
docsIfMCmtsDepiSessionCinLatencyPerfEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiSessionCinLatencyPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row for this table.
It is a vendor implementation to limit the number
of entries per DEPI session (ifIndex) to be stored
in this table. When the table is full, the oldest
measurement is replaced with a new one."
INDEX {
ifIndex,
docsIfMCmtsDepiSessionCinLatencyPerfIntervalSeq
}
::= { docsIfMCmtsDepiSessionCinLatencyPerfTable 1 }
DocsIfMCmtsDepiSessionCinLatencyPerfEntry ::= SEQUENCE {
docsIfMCmtsDepiSessionCinLatencyPerfIntervalSeq Unsigned32,
docsIfMCmtsDepiSessionCinLatencyPerfValue Unsigned32,
docsIfMCmtsDepiSessionCinLatencyTime TimeTicks
}
docsIfMCmtsDepiSessionCinLatencyPerfIntervalSeq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interval sequence where the CIN latency
measurement was taken. It is valid an implementation
that overrides the oldest sequence number entry with the
most recent measurement."
::= { docsIfMCmtsDepiSessionCinLatencyPerfEntry 1 }
docsIfMCmtsDepiSessionCinLatencyPerfValue OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "MasterClockTicks"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CIN latency value measured for the DEPI session
pointed by this entry."
::= { docsIfMCmtsDepiSessionCinLatencyPerfEntry 2 }
docsIfMCmtsDepiSessionCinLatencyTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sysUpTime value of the last time this entry was
updated."
::= { docsIfMCmtsDepiSessionCinLatencyPerfEntry 3 }
-- Policies for mapping Service Flows to PSP packets
--
--
-- docsIfMCmtsDepiPhbPolicyTable
-- Applicable to CMTS only
docsIfMCmtsDepiPhbPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsDepiPhbPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The policy rules that apply to DOCSIS traffic (traffic
profiles) of a DEPI session.
Traffic Profiles are ways to discriminate specific
traffic flows for QOS treatment in the CIN and EQAM device.
The main function of this table is to map the DOCSIS SF
egress traffic to the Converged Interconnect Network PHB
configuration; thus, from the M-CMTS to the EQAM IP host
Ingress port, the QOS levels are defined properly.
In D-MPT mode this table is only applicable to PHB egress
marking for the CIN.
In PSP mode this table is referenced PHBID CIN
(referenced by docsIfMCmtsDepiSessionConfigCinPhbIdPolicy)
The CIN PHBs is operator specific. The CIN per-hub-Behavior
of this table accomplishes:
o DOCSIS MAPs, DOCSIS MAC messages and PacketCable VoIP
PHBID are configured in a reserved policy tag
'ExpediteForwardCIN' traffic. This
policy has a 'permanent' storage.
o Data traffic (per DOCSIS Service Flows) is assigned to
PBHIDs based on Admission policies rules, e.g.,
Service Class Name, DOCSIS specific parameters, etc.
This table only deals with policies based with SCN.
Other traffic descriptor rules are vendor dependent."
::= { docsIfMCmtsDepiQosObjects 1 }
docsIfMCmtsDepiPhbPolicyEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsDepiPhbPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual Table entry.
A consumer of this table uses a lexicographical matching
of entries to apply the respective policy, e.g.,
this table is used for two types of policy assignments:
When referenced by an instance of
docsIfMCmtsDepiSessionConfigCinPhbIdPolicy, the value of
docsIfMCmtsDepiPhbPolicySCN is passed to the CIN PHBID
handler to encapsulate the SF payload with DEPI tunnel
PHBID. It means different DOCSIS traffic profiles are
assigned to different PHBIDs for the CIN transport."
INDEX { docsIfMCmtsDepiPhbPolicyTag }
::= { docsIfMCmtsDepiPhbPolicyTable 1 }
DocsIfMCmtsDepiPhbPolicyEntry ::= SEQUENCE {
docsIfMCmtsDepiPhbPolicyTag SnmpAdminString,
docsIfMCmtsDepiPhbPolicySCN SnmpAdminString,
docsIfMCmtsDepiPhbPolicyCinPhbId Unsigned32,
docsIfMCmtsDepiPhbPolicyStorage StorageType,
docsIfMCmtsDepiPhbPolicyRowStatus RowStatus
}
docsIfMCmtsDepiPhbPolicyTag OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the policy."
::= { docsIfMCmtsDepiPhbPolicyEntry 1 }
docsIfMCmtsDepiPhbPolicySCN OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Service Class Name used to map DOCSIS traffic to
DEPI Flow IDs and/or CIN PHBIDs.
This value is not null terminated as other DOCSIS
interfaces defines SCN."
::= { docsIfMCmtsDepiPhbPolicyEntry 2 }
docsIfMCmtsDepiPhbPolicyCinPhbId OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The CIN PHBID assigned to transport the DOCSIS traffic
that matches docsIfMCmtsDepiPhbPolicySCN for the related
DEPI session."
::= { docsIfMCmtsDepiPhbPolicyEntry 3 }
docsIfMCmtsDepiPhbPolicyStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage realization of this entry
'permanent' columnar objects allow write access."
::= { docsIfMCmtsDepiPhbPolicyEntry 4 }
docsIfMCmtsDepiPhbPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual table.
Changes in this columnar objects while this entry is active
will take effect on new DOCSIS packets being mapped by this
policy entry."
::= { docsIfMCmtsDepiPhbPolicyEntry 5 }
-- Extensions for DOCSIS QOS Service Flow Table
docsIfMCmtsQosServiceFlowExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsIfMCmtsQosServiceFlowExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains M-CMTS Extensions of the
DOCSIS Service Flow table to describe DEPI QOS associations
to Service Flows.
DEPI Connection Control Table indicates the policies to
apply any time a new DOCSIS Service Flow is added to the
M-CMTS Downstream interface."
::= { docsIfMCmtsDepiQosObjects 2 }
docsIfMCmtsQosServiceFlowExtEntry OBJECT-TYPE
SYNTAX DocsIfMCmtsQosServiceFlowExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table exists for each
Service Flow ID of a M-CMTS Downstream Interface type.
This table is an extension of DocsQosServiceFlowEntry."
INDEX {
ifIndex,
docsQosServiceFlowId
}
::= { docsIfMCmtsQosServiceFlowExtTable 1 }
DocsIfMCmtsQosServiceFlowExtEntry ::= SEQUENCE {
docsIfMCmtsQosServiceFlowExtDepiFlowId Unsigned32,
docsIfMCmtsQosServiceFlowExtCinPhbId Unsigned32,
docsIfMCmtsQosServiceFlowExtDepiIfIndex InterfaceIndexOrZero
}
docsIfMCmtsQosServiceFlowExtDepiFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DEPI Flow ID associated with this Service Flow."
::= { docsIfMCmtsQosServiceFlowExtEntry 1 }
docsIfMCmtsQosServiceFlowExtCinPhbId OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CIN PHBID associated with this Service Flow."
::= { docsIfMCmtsQosServiceFlowExtEntry 2 }
docsIfMCmtsQosServiceFlowExtDepiIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the M-CMTS DS interface pertaining to
this Service flow."
::= { docsIfMCmtsQosServiceFlowExtEntry 3 }
-- ---------------------------------------------------------
-- Conformance definitions
-- ---------------------------------------------------------
docsIfMCmtsConformance OBJECT IDENTIFIER
::= { docsIfMCmtsMib 2 }
docsIfMCmtsCompliances OBJECT IDENTIFIER
::= { docsIfMCmtsConformance 1 }
docsIfMCmtsGroups OBJECT IDENTIFIER
::= { docsIfMCmtsConformance 2 }
docsIfMCmtsCoreDeviceCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for M-CMTS Core compliant
devices."
MODULE -- this module
MANDATORY-GROUPS {
docsIfMCmtsBaseGroup,
docsIfMCmtsCoreGroup
}
::= { docsIfMCmtsCompliances 1 }
docsIfMCmtsEQAMCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for M-CMTS EQAM compliant
devices."
MODULE -- this module
MANDATORY-GROUPS {
docsIfMCmtsBaseGroup,
docsIfMCmtsEqamDevGroup,
entityPhysicalGroup,
entityPhysical2Group,
entityPhysical3Group,
entityGeneralGroup
}
GROUP entityLogical2Group
DESCRIPTION
"Implementation of this group is not mandatory for Agents
that model all MIB object instances within a
single naming scope."
GROUP entityMappingGroup
DESCRIPTION
"Implementation of the entPhysicalContainsTable is
mandatory for EQAMs. Implementation of the
entLPMappingTable and entAliasMappingTable are required
for agents with MIB object
instances within multiple logical entities. EQAM devices
with MIB object instances in a single naming scope SHOULD
implement entAliasMappingTable by using
entAliasLogicalIndexOrZero set to zero."
OBJECT entPhysicalSerialNum
MIN-ACCESS not-accessible
DESCRIPTION
"Read and write access is not required for agents that
cannot identify serial number information for physical
entities, and/or cannot provide non-volatile storage for
NMS-assigned serial numbers.
Write access is not required for agents that can identify
serial number information for physical entities but cannot
provide non-volatile storage for NMS-assigned serial
numbers.
Write access is not required for physical entities for
physical entities for which the associated value of the
entPhysicalIsFRU object is equal to 'false(2)'."
OBJECT entPhysicalAlias
MIN-ACCESS read-only
DESCRIPTION
"Write access is required only if the associated
entPhysicalClass value is equal to 'chassis(3)'."
OBJECT entPhysicalAssetID
MIN-ACCESS not-accessible
DESCRIPTION
"Read and write access is not required for agents that
cannot provide non-volatile storage for NMS-assigned asset
identifiers.
Write access is not required for physical entities for which
the associated value of entPhysicalIsFRU is equal to
'false(2)'."
OBJECT entPhysicalClass
SYNTAX INTEGER {
other(1),
unknown(2),
chassis(3),
backplane(4),
container(5),
powerSupply(6),
fan(7),
sensor(8),
module(9),
port(10),
stack(11)
}
DESCRIPTION
"Implementation of the 'cpu(12)' enumeration is not
required."
::= { docsIfMCmtsCompliances 2 }
docsIfMCmtsBaseGroup OBJECT-GROUP
OBJECTS {
docsIfMCmtsDepiSessionConfigCableMacIfIndex,
docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex,
docsIfMCmtsDepiSessionConfigAddrType,
docsIfMCmtsDepiSessionConfigLocalAddr,
docsIfMCmtsDepiSessionConfigRemoteAddr,
docsIfMCmtsDepiSessionConfigL2TPv3HeaderType,
docsIfMCmtsDepiSessionConfigMethod,
docsIfMCmtsDepiSessionConfigTSID,
docsIfMCmtsDepiSessionConfigDEPIMode,
docsIfMCmtsDepiSessionConfigRsrcAllocReq,
docsIfMCmtsDepiSessionConfigCinPhbIdPolicy,
docsIfMCmtsDepiSessionConfigSyncEnabled,
docsIfMCmtsDepiSessionConfigSyncInterval,
docsIfMCmtsDepiSessionConfigPhyParamsFlag,
docsIfMCmtsDepiSessionConfigChannelFrequency,
docsIfMCmtsDepiSessionConfigChannelModulation,
docsIfMCmtsDepiSessionConfigChannelInterleave,
docsIfMCmtsDepiSessionConfigChannelPower,
docsIfMCmtsDepiSessionConfigChannelAnnex,
docsIfMCmtsDepiSessionConfigChannelSymbolRateM,
docsIfMCmtsDepiSessionConfigChannelSymbolRateN,
docsIfMCmtsDepiSessionConfigChannelOutputRate,
docsIfMCmtsDepiSessionConfigChannelBurstSize,
docsIfMCmtsDepiSessionConfigStorage,
docsIfMCmtsDepiSessionConfigRowStatus,
docsIfMCmtsDepiSessionConfigChannelId,
docsIfMCmtsDepiSessionInfoCfgIndex,
docsIfMCmtsDepiSessionInfoUdpPort,
docsIfMCmtsDepiSessionInfoMaxPayload,
docsIfMCmtsDepiSessionInfoPathPayload,
docsIfMCmtsDepiSessionInfoIncludeDOCSISMsgs,
docsIfMCmtsDepiSessionInfoRsrcAllocResp,
docsIfMCmtsDepiSessionInfoConnCtrlID,
docsIfMCmtsDepiSessionInfoEQAMSessionID,
docsIfMCmtsDepiSessionInfoOwner,
docsIfMCmtsDepiSessionInfoState,
docsIfMCmtsDepiSessionInfoErrorCode,
docsIfMCmtsDepiSessionInfoCreationTime,
docsIfMCmtsDepiSessionInfoStorage,
docsIfMCmtsDepiRsrcAllocPhbId,
docsIfMCmtsDepiRsrcAllocFlowId,
docsIfMCmtsDepiRsrcAllocUdpPort,
docsIfMCmtsDepiRsrcAllocPolicyScnTags,
docsIfMCmtsDepiRsrcAllocStorage,
docsIfMCmtsDepiRsrcAllocRowStatus,
docsIfMCmtsDepiSessionInfoOutOfSequencePkts,
docsIfMCmtsDepiSessionCinLatencyInterval,
docsIfMCmtsDepiSessionCinLatencyThrshld,
docsIfMCmtsDepiSessionCinEventLevel,
docsIfMCmtsDepiSessionCinLastValue,
docsIfMCmtsDepiSessionCinLastValueIfIndex,
docsIfMCmtsDepiSessionCinLatencyValueLastTime
}
STATUS current
DESCRIPTION
"Group of objects implemented in M-CMTS compliant devices."
::= { docsIfMCmtsGroups 1 }
docsIfMCmtsCoreGroup OBJECT-GROUP
OBJECTS {
docsIfMCmtsCoreDownstreamPhyDependencies,
docsIfMCmtsCoreDownstreamType,
docsIfMCmtsQosServiceFlowExtDepiFlowId,
docsIfMCmtsQosServiceFlowExtCinPhbId,
docsIfMCmtsQosServiceFlowExtDepiIfIndex,
docsIfMCmtsDepiSessionCinLatencyPerfValue,
docsIfMCmtsDepiSessionCinLatencyTime,
docsIfMCmtsDepiPhbPolicySCN,
docsIfMCmtsDepiPhbPolicyCinPhbId,
docsIfMCmtsDepiPhbPolicyStorage,
docsIfMCmtsDepiPhbPolicyRowStatus
}
STATUS current
DESCRIPTION
"Group of objects implemented in M-CMTS Core compliant
devices."
::= { docsIfMCmtsGroups 2 }
docsIfMCmtsEqamDevGroup OBJECT-GROUP
OBJECTS {
docsIfMCmtsEqamDownstreamTSID,
docsIfMCmtsEqamDownstreamPhyDependencies,
docsIfMCmtsEqamDownstreamDevicePhyParamLock,
docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock,
docsIfMCmtsEqamDownstreamAllocationType,
docsIfMCmtsEqamDownstreamAllocationStatus,
docsIfMCmtsEqamDownstreamAllocationTimeout,
docsIfMCmtsEqamDownstreamDRRPAdvertizing,
docsIfMCmtsEqamDownstreamUdpPortMapping,
docsIfMCmtsEqamDownstreamCapabFrequency,
docsIfMCmtsEqamDownstreamCapabBandwidth,
docsIfMCmtsEqamDownstreamCapabPower,
docsIfMCmtsEqamDownstreamCapabModulation,
docsIfMCmtsEqamDownstreamCapabInterleaver,
docsIfMCmtsEqamDownstreamCapabJ83Annex,
docsIfMCmtsEqamDownstreamCapabConcurrentServices,
docsIfMCmtsEqamDownstreamCapabServicesTransport,
docsIfMCmtsEqamDownstreamCapabMuting,
docsIfMCmtsEqamGroupDependencyGroupID,
docsIfMCmtsEqamGroupDependencyType,
docsIfMCmtsEqamGlobCfgDownPhysicalIndex,
docsIfMCmtsEqamGlobCfgDownBandwidth,
docsIfMCmtsEqamGlobCfgDownPower,
docsIfMCmtsEqamGlobCfgDownModulation,
docsIfMCmtsEqamGlobCfgDownInterleave,
docsIfMCmtsEqamGlogCfgDownAnnex,
docsIfMCmtsEqamGlobCfgDownSymbolRateM,
docsIfMCmtsEqamGlobCfgDownSymbolRateN,
docsIfMCmtsEqamGlobCfgDownLockParams,
docsIfMCmtsEqamGlobCfgDownExecutionCode,
docsIfMCmtsEqamGlobCfgDownErrorsCount,
docsIfMCmtsEqamGlobCfgDownRowStatus,
docsIfMCmtsChannelBlockNumberChannels,
docsIfMCmtsChannelBlockCfgNumberChannels,
docsIfMCmtsChannelBlockMute,
docsIfMCmtsChannelBlockTestType,
docsIfMCmtsChannelBlockTestIfIndex
}
STATUS current
DESCRIPTION
"Group of objects implemented in M-CMTS EQAM compliant
devices."
::= { docsIfMCmtsGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink