MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 16:32:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-FR-CONN-STAT-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

906 lines
26 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWanFrConnStatMIB
--
-- October 2002, Subra.Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-FR-CONN-STAT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
frChan FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanFrConnStatMIB MODULE-IDENTITY
LAST-UPDATED "200210180000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module for frame relay connection
statistics.
Terminologies Used:
SIW - Frame-Relay-to ATM Service Interworking
FECN - Forward Explicit Congestion Notification.
The FECN bit in Frame Relay header communicate
network congestion to the endpoint in the forward
direction.
BECN - Backward Explicit Congestion Notification.
The BECN bit in Frame Relay header communicate
network congestion to the endpoint in the backward
direction.
DE - Discard Eligibility. The DE bit in Frame Relay
header communicates the loss priority. A marked
frame with a DE bit value of 1 is considered
less important than other frames in transmission
and should be discarded before frames with a
DE bit value of zero.
Tagged - Some of the statistics objects described in
this MIB are applicable where the
information is Set by the Switch/Service-Module.
These objects contain word 'Tagged' in the name.
For example : 'rcvFramesTaggedFECN'; This is the
counter where FECN is set by the Switch in
the frame received from the network. FECN was
not set in the frame from the Network.
The bit Set by the switch on an incoming or outgoing
frame is called 'tagged' in this mib."
REVISION "200210180000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB."
::= { ciscoWan 48 }
frChanCntGrp OBJECT IDENTIFIER ::= { frChan 3 }
frChanCntGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrChanCntGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on statistics
for Frame Relay Connections."
::= { frChanCntGrp 1 }
frChanCntGrpEntry OBJECT-TYPE
SYNTAX FrChanCntGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the
statistical information for Frame Relay
connections."
INDEX { cntChanNum }
::= { frChanCntGrpTable 1}
FrChanCntGrpEntry ::=
SEQUENCE {
cntChanNum Integer32,
rcvFrames Counter32,
rcvBytes Counter32,
rcvFramesDE Counter32,
rcvBytesDE Counter32,
rcvFramesDiscard Counter32,
rcvBytesDiscard Counter32,
rcvFramesDiscShelfAlarm Counter32,
rcvFramesDiscXceedQDepth Counter32,
rcvBytesDiscXceedQDepth Counter32,
rcvFramesDiscXceedDEThresh Counter32,
rcvFramesFECN Counter32,
rcvFramesBECN Counter32,
rcvFramesTaggedFECN Counter32,
rcvFramesTaggedBECN Counter32,
rcvFramesTaggedDE Counter32,
rcvBytesTaggedDE Counter32,
rcvKbpsAIR Integer32,
xmtFrames Counter32,
xmtBytes Counter32,
xmtFramesFECN Counter32,
xmtFramesBECN Counter32,
xmtFramesDE Counter32,
xmtBytesDE Counter32,
xmtFramesDiscard Counter32,
xmtBytesDiscard Counter32,
xmtFramesDiscXceedQDepth Counter32,
xmtBytesDiscXceedQDepth Counter32,
xmtFramesDiscXceedDEThresh Counter32,
xmtFramesDiscPhyLayerFail Counter32,
xmtFramesDiscCRCError Counter32,
xmtFramesDiscReassmFail Counter32,
xmtFramesDiscSrcAbort Counter32,
xmtFramesDuringLMIAlarm Counter32,
xmtBytesDuringLMIAlarm Counter32,
xmtFramesTaggedFECN Counter32,
xmtFramesTaggedBECN Counter32,
xmtKbpsAIR Integer32,
chanClrButton INTEGER,
chanSecUpTime Counter32,
rcvFramesDiscUPC Counter32,
xmtBytesTaggedDE Counter32,
xmtFramesTaggedDE Counter32,
xmtFramesInvalidCPIs Counter32,
xmtFramesLengthViolations Counter32,
xmtFramesOversizedSDUs Counter32,
xmtFramesUnknownProtocols Counter32,
rcvFramesUnknownProtocols Counter32,
xmtBytesDEDiscard Counter32,
rcvBytesDEDiscard Counter32
}
cntChanNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object refers to
refers to the virtual connection/channel index.
The value for this object must be same as the
value of 'chanNum' from frChanCnfGrpTable."
REFERENCE
"chanNum object in CISCO-WAN-FR-CONN-MIB."
::= { frChanCntGrpEntry 1}
rcvFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames Received by the network
(ingress) for this PVC end-point."
::= { frChanCntGrpEntry 2 }
rcvBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes Received by the network
(ingress) for this PVC end-point."
::= { frChanCntGrpEntry 3 }
rcvFramesDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the network(ingress)
with the DE bit set to (1) for this frame relay connection."
::= { frChanCntGrpEntry 4 }
rcvBytesDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the network(ingress)
with the DE bit set to (1) for this frame relay connection."
::= { frChanCntGrpEntry 5 }
rcvFramesDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the network(ingress)
that were discarded due to traffic enforcement
for this frame relay connection."
::= { frChanCntGrpEntry 6 }
rcvBytesDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received by the network(ingress)
that were discarded due to traffic enforcement
for this frame relay connection."
::= { frChanCntGrpEntry 7 }
rcvFramesDiscShelfAlarm OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to shelf alarm
For FRSM12 Card: Not Supported."
::= { frChanCntGrpEntry 8 }
rcvFramesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to exceeded queue depth."
::= { frChanCntGrpEntry 9 }
rcvBytesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes discarded on the ingress
due to exceeded queue depth."
::= { frChanCntGrpEntry 10 }
rcvFramesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to exceeded DE Threshold."
::= { frChanCntGrpEntry 11 }
rcvFramesFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the network(ingress)
that have the FECN bit set for this frame relay connection."
::= { frChanCntGrpEntry 12 }
rcvFramesBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received by the network(ingress)
that have the BECN bit set for this frame relay connection."
::= { frChanCntGrpEntry 13 }
rcvFramesTaggedFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received for which the
the switch set(tagged) the FECN bit."
::= { frChanCntGrpEntry 14 }
rcvFramesTaggedBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received for which the
switch set(tagged) the BECN bit."
::= { frChanCntGrpEntry 15 }
rcvFramesTaggedDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received for which the
switch set(tagged) the DE bit."
::= { frChanCntGrpEntry 16 }
rcvBytesTaggedDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes received for which the
switch set the DE bit."
::= { frChanCntGrpEntry 17 }
rcvKbpsAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average Information Rate in KBPS."
::= { frChanCntGrpEntry 18 }
xmtFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)."
::= { frChanCntGrpEntry 19 }
xmtBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes sent by the network(egress)."
::= { frChanCntGrpEntry 20 }
xmtFramesFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)
that have the FECN bit set for this frame relay connection."
::= { frChanCntGrpEntry 21 }
xmtFramesBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)
that have the BECN bit set for this frame relay connection."
::= { frChanCntGrpEntry 22 }
xmtFramesDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)
with the DE bit set to (1) for this frame relay
connection."
::= { frChanCntGrpEntry 23 }
xmtBytesDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)
with the DE bit set to (1) for this frame relay
connection."
::= { frChanCntGrpEntry 24 }
xmtFramesDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames sent by the network(egress)
that were discarded due to traffic enforcement
for this frame relay connection."
::= { frChanCntGrpEntry 25 }
xmtBytesDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes discarded on the egress
For FRSM12 Card: Not Supported
"
::= { frChanCntGrpEntry 26 }
xmtFramesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to exceeded queue depth
For FRSM12 Card: Not Supported."
::= { frChanCntGrpEntry 27 }
xmtBytesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes discarded on the egress
due to exceeded queue depth
For FRSM12 Card: Not Supported."
::= { frChanCntGrpEntry 28 }
xmtFramesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to exceeded DE Threshold
For FRSM12 Card: Not Supported
"
::= { frChanCntGrpEntry 29 }
xmtFramesDiscPhyLayerFail OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to physical layer failure."
::= { frChanCntGrpEntry 30 }
xmtFramesDiscCRCError OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to CRC Error."
::= { frChanCntGrpEntry 31 }
xmtFramesDiscReassmFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to reassembly failure
For FRSM12 Card: Not Supported."
::= { frChanCntGrpEntry 32 }
xmtFramesDiscSrcAbort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to source abort."
::= { frChanCntGrpEntry 33 }
xmtFramesDuringLMIAlarm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted during
LMI logical port alarm
"
::= { frChanCntGrpEntry 34 }
xmtBytesDuringLMIAlarm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted during
LMI logical port alarm."
::= { frChanCntGrpEntry 35 }
xmtFramesTaggedFECN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted for which
the switch set the FECN bit."
::= { frChanCntGrpEntry 36 }
xmtFramesTaggedBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted for which
the switch set the BECN bit."
::= { frChanCntGrpEntry 37 }
xmtKbpsAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Average Information Rate in KBPS."
::= { frChanCntGrpEntry 38 }
chanClrButton OBJECT-TYPE
SYNTAX INTEGER {
noaction (1),
clear (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Channel clear button. Clears Channel Counters."
::= { frChanCntGrpEntry 39 }
xmtFramesTaggedDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted which have been DE tagged
at the far end ingress in excess of CIR."
::= { frChanCntGrpEntry 40 }
xmtBytesTaggedDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted which have been DE tagged
at the far end ingress in excess of CIR."
::= { frChanCntGrpEntry 41 }
rcvFramesDiscUPC OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded at ingress
due to the UPC measurement in excess of CIR+EIR."
::= { frChanCntGrpEntry 42 }
chanSecUpTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds the PVC stay in service."
::= { frChanCntGrpEntry 43 }
xmtFramesInvalidCPIs OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames transmitted with invalid CPI header.
currently valid is 0."
::= { frChanCntGrpEntry 44 }
xmtFramesLengthViolations OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded due to violation
of length in the egress direction."
::= { frChanCntGrpEntry 45 }
xmtFramesOversizedSDUs OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded because the size is beyond
the max in the egress direction."
::= { frChanCntGrpEntry 46 }
xmtFramesUnknownProtocols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded for Unknown protocol in
the egress direction. Used only in SIW for PDUs that
are dropped."
::= { frChanCntGrpEntry 47 }
rcvFramesUnknownProtocols OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames discarded for Unknown protocol in the
ingress direction. Used only in SIW for PDUs that
are dropped."
::= { frChanCntGrpEntry 48 }
xmtBytesDEDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes discarded in the egress direction
by the channel due to exceeded DE Threshold."
::= { frChanCntGrpEntry 49 }
rcvBytesDEDiscard OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes discarded in the ingress direction
by the channel due to exceeded DE Threshold."
::= { frChanCntGrpEntry 50 }
-- *********************************************************************
--
-- frstdABRCounters group
-- Channel OR VC COUNTERS
--
-- *********************************************************************
frstdABRCntGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrstdABRCntGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on statistics
for Frame Relay Connections. This is applicable
for ABR Frame Relay connections only."
::= { frChanCntGrp 2 }
frstdABRCntGrpEntry OBJECT-TYPE
SYNTAX FrstdABRCntGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the
statistical information for Frame Relay
connections."
INDEX { frstdABRcntChanNum }
::= { frstdABRCntGrpTable 1}
FrstdABRCntGrpEntry ::=
SEQUENCE {
frstdABRcntChanNum Integer32,
frChanFrmXmtToNetworkCnt Counter32,
frChanBrmXmtToNetworkCnt Counter32,
frChanCrcErrRmRcvFromNetworkCnt Counter32,
frChanFrmRcvFromNetworkCnt Counter32,
frChanBrmRcvFromNetworkCnt Counter32,
frChanFrmNotTurnedAroundCnt Counter32
}
frstdABRcntChanNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object refers to
the frame relay connection/channel index.
The value for this object must be same as the value
of object 'chanNum' from frChanCnfGrpTable."
REFERENCE
"chanNum object in CISCO-WAN-FR-CONN-MIB."
::= { frstdABRCntGrpEntry 1}
frChanFrmXmtToNetworkCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Forward RM cells
transmitted to the network."
::= { frstdABRCntGrpEntry 2 }
frChanBrmXmtToNetworkCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Backward RM cells
transmitted to the network."
::= { frstdABRCntGrpEntry 3 }
frChanCrcErrRmRcvFromNetworkCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RM cells received from
the network with incorrect CRC-10."
::= { frstdABRCntGrpEntry 4 }
frChanFrmRcvFromNetworkCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Forward RM cells
received from the network."
::= { frstdABRCntGrpEntry 5 }
frChanBrmRcvFromNetworkCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Backward RM cells
received from the network."
::= { frstdABRCntGrpEntry 6 }
frChanFrmNotTurnedAroundCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Forward RM cells
received from the network and not
turned around."
::= { frstdABRCntGrpEntry 7 }
-- conformance information
cwfConnStatMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrConnStatMIB 2 }
cwfConnStatMIBGroups OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 1 }
cwfConnStatMIBCompliances OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 2 }
-- compliance statements
ciscoWanFrConnStatCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Frame Relay
Connection Statstics MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanFrConnStatsGroup
}
GROUP ciscoWanFrConnABRStatsGroup
DESCRIPTION
"This group is mandatory for Frame Relay modules
supporting ABR connections."
GROUP ciscoWanFrConnQueueStatsGroup
DESCRIPTION
"This group is mandatory for Frame Relay modules
supporting connections providing queue depth
and DE threshold related statistics."
::= { cwfConnStatMIBCompliances 1 }
ciscoWanFrConnStatsGroup OBJECT-GROUP
OBJECTS {
cntChanNum,
rcvFrames,
rcvBytes,
rcvFramesDE,
rcvBytesDE,
rcvFramesDiscard,
rcvBytesDiscard,
rcvFramesDiscShelfAlarm ,
rcvFramesFECN,
rcvFramesBECN,
rcvFramesTaggedFECN,
rcvFramesTaggedBECN,
rcvFramesTaggedDE,
rcvBytesTaggedDE,
rcvKbpsAIR,
xmtFrames,
xmtBytes,
xmtFramesFECN,
xmtFramesBECN,
xmtFramesDE,
xmtBytesDE,
xmtFramesDiscard,
xmtBytesDiscard,
xmtFramesDiscPhyLayerFail,
xmtFramesDiscCRCError,
xmtFramesDiscReassmFail,
xmtFramesDiscSrcAbort,
xmtFramesDuringLMIAlarm,
xmtBytesDuringLMIAlarm,
xmtFramesTaggedFECN,
xmtFramesTaggedBECN,
xmtKbpsAIR,
chanClrButton,
chanSecUpTime,
rcvFramesDiscUPC,
xmtBytesTaggedDE,
xmtFramesTaggedDE,
xmtFramesInvalidCPIs,
xmtFramesLengthViolations,
xmtFramesOversizedSDUs,
xmtFramesUnknownProtocols,
rcvFramesUnknownProtocols,
xmtBytesDEDiscard,
rcvBytesDEDiscard
}
STATUS current
DESCRIPTION
"The objects related to Frame Relay connection
statistics."
::= { cwfConnStatMIBGroups 1 }
ciscoWanFrConnQueueStatsGroup OBJECT-GROUP
OBJECTS {
rcvFramesDiscXceedQDepth,
rcvBytesDiscXceedQDepth,
rcvFramesDiscXceedDEThresh,
xmtFramesDiscXceedQDepth,
xmtBytesDiscXceedQDepth,
xmtFramesDiscXceedDEThresh
}
STATUS current
DESCRIPTION
"The objects related to Queue depth and threshold
related statistics for Frame Relay connections."
::= { cwfConnStatMIBGroups 2 }
ciscoWanFrConnABRStatsGroup OBJECT-GROUP
OBJECTS {
frstdABRcntChanNum,
frChanFrmXmtToNetworkCnt,
frChanBrmXmtToNetworkCnt,
frChanCrcErrRmRcvFromNetworkCnt,
frChanFrmRcvFromNetworkCnt,
frChanBrmRcvFromNetworkCnt,
frChanFrmNotTurnedAroundCnt
}
STATUS current
DESCRIPTION
"The objects related to ABR statistics on
frame relay connections."
::= { cwfConnStatMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink