MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 16:32:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-BBIF-ILMI-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

568 lines
17 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-WAN-BBIF-ILMI-MIB: ILMI(Integrated Local Management Interface)
-- MIB for broad band Interface in MGX82xx series products.
--
-- December 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-BBIF-ILMI-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32 FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
AtmIlmiNetworkPrefix
FROM ATM-TC-MIB
bbIfCnf,
bbIfCnt FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanBbifIlmiMIB MODULE-IDENTITY
LAST-UPDATED "200212200000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module for ILMI configuration and
ILMI statistics for broad band interface ports
in PXM1 service module. PXM1 service module is supported
in MGX82xx series products.
The broadband interface referred to in this mib is for
ATM logical ports."
REVISION "200212200000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 33 }
bbIfCnfSigILMIGrp OBJECT IDENTIFIER ::= { bbIfCnf 2}
bbIfCntSigILMIGrp OBJECT IDENTIFIER ::= { bbIfCnt 2}
-- **********************************************************************
--
-- bbIfCnfSigILMI group
-- Port configurable signalling parameters,
-- when the logical interface is used as a UNI port
--
-- **********************************************************************
bbIfCnfSigILMIGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BbIfCnfSigILMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ILMI configuration parameters
for a broadband interface."
::= { bbIfCnfSigILMIGrp 1 }
bbIfCnfSigILMIGrpEntry OBJECT-TYPE
SYNTAX BbIfCnfSigILMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a boradband interface used as a UNI port.
Each entry contains ILMI configuration parameters and
variables for a broadband interface."
INDEX { bbIfSigPortNum }
::= { bbIfCnfSigILMIGrpTable 1 }
BbIfCnfSigILMIGrpEntry ::=
SEQUENCE {
bbIfSigPortNum Integer32,
bbIfIlmiEnable INTEGER,
bbIfSignallingProtocolType INTEGER,
bbIfSignallingVpi Integer32,
bbIfSignallingVci Integer32,
bbIfAddrPrefix AtmIlmiNetworkPrefix,
bbIfCustomerId Integer32,
bbIfProtocolRevNo Integer32,
bbIfIlmiTrapEnable INTEGER,
bbIfMinTrapInterval Integer32,
bbIfKeepAlivePollingEnable INTEGER,
bbIfErrorThresholdN491 Integer32,
bbIfEventThresholdN492 Integer32,
bbIfPollingIntervalT491 INTEGER,
bbIfMinEnquiryIntervalT493 Integer32,
bbIfAddrRegEnable INTEGER
}
bbIfSigPortNum OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfNum object from bbIfCnfGrpTable."
REFERENCE
"CISCO-WAN-BBIF-PORT-MIB"
::= { bbIfCnfSigILMIGrpEntry 1 }
bbIfIlmiEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logical interface is a generic entity, it can
be used as either a virtual trunk, or user port with
UNI support.
This variable is provided to enable/disable ILMI.
ILMI should only be enabled on 'user ports' and not on
'virtual trunks'
1 - disable
2 - enable"
DEFVAL { disable }
::= { bbIfCnfSigILMIGrpEntry 2}
bbIfSignallingProtocolType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
noSignalling (2),
iLMI (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will set the signalling protocol
other(1) : other
noSignalling(2) : noSignalling
iLMI(3) : ILMI"
::= { bbIfCnfSigILMIGrpEntry 3}
bbIfSignallingVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VPI on which signalling
cells received."
::= { bbIfCnfSigILMIGrpEntry 4}
bbIfSignallingVci OBJECT-TYPE
SYNTAX Integer32 (0..'ffff'h )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VPI on which signalling
cells received."
::= { bbIfCnfSigILMIGrpEntry 5}
bbIfAddrPrefix OBJECT-TYPE
SYNTAX AtmIlmiNetworkPrefix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network Prefix for the ATM address."
::= { bbIfCnfSigILMIGrpEntry 6}
bbIfCustomerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the customer Id."
::= { bbIfCnfSigILMIGrpEntry 7}
bbIfProtocolRevNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the protocol revision number."
::= { bbIfCnfSigILMIGrpEntry 8}
bbIfIlmiTrapEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling/disabling
the sending of ILMI traps."
::= { bbIfCnfSigILMIGrpEntry 9}
bbIfMinTrapInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum throttling
period of notification generation. The notificaton
events should be suppressed by the agent until the
current throttling period expires."
::= { bbIfCnfSigILMIGrpEntry 10}
bbIfKeepAlivePollingEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Keep Alive Polling."
::= { bbIfCnfSigILMIGrpEntry 11}
bbIfErrorThresholdN491 OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Error Threshold (N491) value.
The number of keep alive polls that must fail within
a window of N491 polls, before the port is placed
in the failed state. This attribute is applicable only
when bbIfSignallingProtocolType set to iLMI(3)."
::= { bbIfCnfSigILMIGrpEntry 12}
bbIfEventThresholdN492 OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Error Threshold (N492) value.
The number of keep alive polls that must fail within
a window of N492 polls, before the port is placed
in the failed state. This attribute is applicable only
when bbIfSignallingProtocolType set to iLMI(3)."
::= { bbIfCnfSigILMIGrpEntry 13}
bbIfPollingIntervalT491 OBJECT-TYPE
SYNTAX INTEGER {
v1(5),
v2(10),
v3(15),
v4(20),
v5(25),
v6(30),
v7(35),
v8(40),
v9(45),
v10(50),
v11(55),
v12(60)
}
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Polling Interval (T491) value.
The T491 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only
when bbIfSignallingProtocolType set to iLMI(3)."
::= { bbIfCnfSigILMIGrpEntry 14}
bbIfMinEnquiryIntervalT493 OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only when
bbIfSignallingProtocolType set to iLMI(3)."
::= { bbIfCnfSigILMIGrpEntry 15}
bbIfAddrRegEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable ILMI Address Registration."
DEFVAL { disable }
::= { bbIfCnfSigILMIGrpEntry 16}
-- **********************************************************************
--
-- bbIfCntSigILMI group
-- ILMI and signalling counts, when the logical interface is
-- used as a UNI port
--
-- **********************************************************************
bbIfCntSigILMIGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF BbIfCntSigILMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics related to
ILMI."
::= { bbIfCntSigILMIGrp 1 }
bbIfCntSigILMIGrpEntry OBJECT-TYPE
SYNTAX BbIfCntSigILMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a boradband interface used as a UNI port."
INDEX { sigCntBbIfNum }
::= { bbIfCntSigILMIGrpTable 1 }
BbIfCntSigILMIGrpEntry ::=
SEQUENCE {
sigCntBbIfNum Integer32,
bbIfSnmpPduReceived Counter32,
bbIfGetRequestReceived Counter32,
bbIfGetNextRequestReceived Counter32,
bbIfSetRequestReceived Counter32,
bbIfTrapReceived Counter32,
bbIfGetResponseReceived Counter32,
bbIfGetResponseTransmitted Counter32,
bbIfGetRequestTransmitted Counter32,
bbIfTrapTransmitted Counter32,
bbIfInvalidPDUReceived Counter32,
bbIfAsn1ParseError Counter32,
bbIfNoSuchNameError Counter32,
bbIfTooBigError Counter32,
bbIfSigCntClrButton INTEGER
}
sigCntBbIfNum OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable."
::= { bbIfCntSigILMIGrpEntry 1}
bbIfSnmpPduReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of snmp packets received on this
logical interface."
::= { bbIfCntSigILMIGrpEntry 2 }
bbIfGetRequestReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of get request messages received."
::= { bbIfCntSigILMIGrpEntry 3 }
bbIfGetNextRequestReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of get-next messages received."
::= { bbIfCntSigILMIGrpEntry 4 }
bbIfSetRequestReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of set messages received."
::= { bbIfCntSigILMIGrpEntry 5 }
bbIfTrapReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of traps received."
::= { bbIfCntSigILMIGrpEntry 6 }
bbIfGetResponseReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keep Alive response messages received."
::= { bbIfCntSigILMIGrpEntry 7 }
bbIfGetResponseTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of response messages transmitted."
::= { bbIfCntSigILMIGrpEntry 8 }
bbIfGetRequestTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Keep Alive get request messages transmitted."
::= { bbIfCntSigILMIGrpEntry 9 }
bbIfTrapTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of trap messages transmitted."
::= { bbIfCntSigILMIGrpEntry 10 }
bbIfInvalidPDUReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid PDUs received."
::= { bbIfCntSigILMIGrpEntry 11 }
bbIfAsn1ParseError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of parse errors on ASN.1."
::= { bbIfCntSigILMIGrpEntry 12 }
bbIfNoSuchNameError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors for name not present."
::= { bbIfCntSigILMIGrpEntry 13 }
bbIfTooBigError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages received with len > 484."
::= { bbIfCntSigILMIGrpEntry 14 }
bbIfSigCntClrButton OBJECT-TYPE
SYNTAX INTEGER {
noAction (1),
resetCounters (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a value of 2 resets all the counters
from bbIfCntSigILMIGrpTable."
::= { bbIfCntSigILMIGrpEntry 15 }
-- conformance information
cwbIlmiMIBConformance OBJECT IDENTIFIER ::= { ciscoWanBbifIlmiMIB 2 }
cwbIlmiMIBGroups OBJECT IDENTIFIER ::= { cwbIlmiMIBConformance 1 }
cwbIlmiMIBCompliances OBJECT IDENTIFIER ::= { cwbIlmiMIBConformance 2 }
-- compliance statements
cwbIlmiCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for objects related
to SRM MIB."
MODULE -- this module
MANDATORY-GROUPS {
cwbIlmiConfGroup,
cwbIlmiStatsGroup
}
OBJECT bbIfCustomerId
MIN-ACCESS read-only
DESCRIPTION
"For INS(Intelligent Network Server) read-write
needs to be supported."
OBJECT bbIfProtocolRevNo
MIN-ACCESS read-only
DESCRIPTION
"For INS(Intelligent Network Server) read-write
needs to be supported."
::= { cwbIlmiMIBCompliances 1 }
cwbIlmiConfGroup OBJECT-GROUP
OBJECTS {
bbIfSigPortNum,
bbIfIlmiEnable,
bbIfSignallingProtocolType,
bbIfSignallingVpi,
bbIfSignallingVci,
bbIfAddrPrefix,
bbIfCustomerId,
bbIfProtocolRevNo,
bbIfIlmiTrapEnable,
bbIfMinTrapInterval,
bbIfKeepAlivePollingEnable,
bbIfErrorThresholdN491,
bbIfEventThresholdN492,
bbIfPollingIntervalT491,
bbIfMinEnquiryIntervalT493,
bbIfAddrRegEnable
}
STATUS current
DESCRIPTION
"The collection of objects which are used for
configuring ILMI on broad band interface ports."
::= { cwbIlmiMIBGroups 1 }
cwbIlmiStatsGroup OBJECT-GROUP
OBJECTS {
sigCntBbIfNum,
bbIfSnmpPduReceived,
bbIfGetRequestReceived,
bbIfGetNextRequestReceived,
bbIfSetRequestReceived,
bbIfTrapReceived,
bbIfGetResponseReceived,
bbIfGetResponseTransmitted,
bbIfGetRequestTransmitted,
bbIfTrapTransmitted,
bbIfInvalidPDUReceived,
bbIfAsn1ParseError,
bbIfNoSuchNameError,
bbIfTooBigError,
bbIfSigCntClrButton
}
STATUS current
DESCRIPTION
"The collection of objects containing
the ILMI statistics on broad band interface ports."
::= { cwbIlmiMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink