mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
723 lines
27 KiB
Plaintext
723 lines
27 KiB
Plaintext
--
|
|
-- Caution. This MIB is temporary and experimental.
|
|
-- In the future it will be removed from products, perhaps
|
|
-- with short notice, in favor of more standard or generic MIBs.
|
|
-- Application developers should not depend on long-term access
|
|
-- to this MIB.
|
|
|
|
CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB
|
|
--REVISION 0.01
|
|
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION, DisplayString
|
|
FROM SNMPv2-TC
|
|
ciscoExperiment
|
|
FROM CISCO-SMI
|
|
rptrGroupIndex, rptrPortGroupIndex, rptrPortIndex
|
|
FROM SNMP-REPEATER-MIB
|
|
PhysAddress
|
|
FROM RFC1213-MIB;
|
|
|
|
|
|
ciscoSibuStackableDualSpeedHubMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9810230000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
E-mail: cs-sibu@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module that extends the REPEATER-MIB to
|
|
manage CISCO low end stackable repeater products.
|
|
For the purpose of this mib, a hub is a repeater
|
|
group and stack is collection of one or more hubs
|
|
interconnected via stack bus connectors."
|
|
|
|
REVISION "9810230000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoExperiment 44 }
|
|
|
|
ciscoSibuStackableDualSpeedHubMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIB 1 }
|
|
|
|
cssSystem OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBObjects 1 }
|
|
cssGroup OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBObjects 2 }
|
|
cssRepeaterPort OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBObjects 3 }
|
|
cssSwitchPort OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBObjects 4 }
|
|
|
|
HubNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the hub number that the system supports
|
|
for stacking. The hub number represents the order
|
|
in which a hub is stacked relative to other members
|
|
of the stack. Lowest hub number represents the top
|
|
member of the stack. This is also the number used in
|
|
the command line interface."
|
|
SYNTAX Integer32 (1..2147483647)
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- |
|
|
-- The Dual Speed Hub System Group |
|
|
-- |
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
cssSystemLinkTraps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1), -- enable linkUp/linkDown traps
|
|
disabled(2) -- disable linkUp/linkDown traps
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the stack is permitted to generate
|
|
linkUp/linkDown traps for both repeater port and
|
|
switch module's port. The stack provides only
|
|
a single global control of link traps in contrast
|
|
to per interface control provided by IF-MIB. The
|
|
value of all instances ifLinkUpDownTrapEnable is set
|
|
to TRUE (FALSE) if this object is set to enabled
|
|
(disabled). The object ifLinkUpDownTrapEnable is
|
|
read-only.
|
|
|
|
A linkUp/linkDown trap is generated whenever a port's
|
|
link STATUS or administrative status changes."
|
|
DEFVAL { enabled }
|
|
::= { cssSystem 1 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- |
|
|
-- The Dual Speed Hub Stack Group |
|
|
-- |
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
cssGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CssGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of member hubs in the stack."
|
|
::= { cssGroup 1 }
|
|
|
|
cssGroupEntry OBJECT-TYPE
|
|
SYNTAX CssGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration parameters for an individual hub.
|
|
An entry is created by default for the master unit
|
|
in the stack. A entry is created (removed) when
|
|
a hub is connected to (removed from) the stack."
|
|
INDEX { rptrGroupIndex }
|
|
::= { cssGroupTable 1 }
|
|
|
|
CssGroupEntry ::= SEQUENCE {
|
|
cssGroupID
|
|
HubNumber,
|
|
cssGroupType
|
|
INTEGER,
|
|
cssGroupSerialNo
|
|
DisplayString,
|
|
cssGroupBoardRevision
|
|
Integer32,
|
|
cssGroupAgentBootVersion
|
|
DisplayString,
|
|
cssGroupAgentFirmwareVersion
|
|
DisplayString,
|
|
cssGroupAgentStatus
|
|
INTEGER,
|
|
cssGroupAgentPhysAddress
|
|
PhysAddress,
|
|
cssGroupInternalPowerState
|
|
INTEGER,
|
|
cssGroupRedundantPowerState
|
|
INTEGER,
|
|
cssGroupReset
|
|
INTEGER,
|
|
cssGroupConfigDefaultReset
|
|
INTEGER,
|
|
cssGroupIsolatedState
|
|
INTEGER
|
|
}
|
|
|
|
cssGroupID OBJECT-TYPE
|
|
SYNTAX HubNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hub identifier of unit in a stack."
|
|
::= { cssGroupEntry 1 }
|
|
|
|
cssGroupType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cisco1538MDS(1), -- Cisco 1538M Micro Hub 10/100
|
|
cisco1538UDS(2), -- Cisco 1538 Micro Hub 10/100
|
|
wsC412M(3), -- FastHub 412M 10/100
|
|
wsC412(4), -- FastHub 412 10/100
|
|
wsC424M(5), -- FastHub 424M 10/100
|
|
wsC424(6) -- FastHub 424 10/100
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The model type of the hub unit"
|
|
::= { cssGroupEntry 2 }
|
|
|
|
cssGroupSerialNo OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Serial number of the hardware."
|
|
::= { cssGroupEntry 4 }
|
|
|
|
cssGroupBoardRevision OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Hardware version of the repeater board."
|
|
::= { cssGroupEntry 5 }
|
|
|
|
cssGroupAgentBootVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the version number of the dual-speed hub
|
|
BOOT software residing in flash. The format is 'V1.2.3'."
|
|
::= { cssGroupEntry 6 }
|
|
|
|
cssGroupAgentFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the version number of the dual-speed hub
|
|
firmware residing in flash. The format is 'V1.2.3'."
|
|
::= { cssGroupEntry 7 }
|
|
|
|
cssGroupAgentStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notPresent(1),
|
|
primary(2),
|
|
backup(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of this hub agent. Each stack allows only
|
|
one SNMP primary agent.
|
|
|
|
notPresent(1): The hub does not have an agent.
|
|
primary(2): The agent of this hub is a primary agent.
|
|
backup(3) : The agent of this hub is a backup agent."
|
|
::= { cssGroupEntry 8 }
|
|
|
|
cssGroupAgentPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC address of this hub's agent"
|
|
::= { cssGroupEntry 9 }
|
|
|
|
cssGroupInternalPowerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the state of the internal power supply.
|
|
|
|
off : The internal power supply is off.
|
|
on : The internal power supply is on."
|
|
::= { cssGroupEntry 12 }
|
|
|
|
cssGroupRedundantPowerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
healthy(2),
|
|
faulty(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the state of the external/backup power
|
|
supply.
|
|
|
|
off : the switch is not connected to a redundant
|
|
power source.
|
|
healthy : a redundant power source is connected to
|
|
the switch and the power source is
|
|
operating correctly.
|
|
faulty : a redundant power source is connected to
|
|
the switch but a failure exists in the
|
|
power system."
|
|
::= { cssGroupEntry 13 }
|
|
|
|
cssGroupReset OBJECT-TYPE
|
|
SYNTAX INTEGER { noReset(1), reset(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to reset(2) causes a complete
|
|
reset of both hardware and software, but does not run
|
|
the POST (Power On Self Test).
|
|
|
|
Setting this object to noReset(1) has no effect.
|
|
The switch always returns the value noReset(1) when
|
|
this object is read."
|
|
DEFVAL { noReset }
|
|
::= { cssGroupEntry 14 }
|
|
|
|
cssGroupConfigDefaultReset OBJECT-TYPE
|
|
SYNTAX INTEGER { noReset(1), reset(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to reset(2) causes a complete
|
|
reset of both hardware and software, but does not
|
|
run the POST (Power On Self Test). All
|
|
configuration parameters will revert to their
|
|
factory default settings.
|
|
|
|
Setting this object to noReset(1) has no effect.
|
|
The switch always returns the value noReset(1) when
|
|
this object is read."
|
|
DEFVAL { noReset }
|
|
::= { cssGroupEntry 15 }
|
|
|
|
cssGroupIsolatedState OBJECT-TYPE
|
|
SYNTAX INTEGER { isolated(1), attached(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to isolated(1) causes this hub
|
|
to be isolated from the back plane bus. Setting
|
|
this object to attached(2) causes this hub to be
|
|
attached to the back plane bus."
|
|
::= { cssGroupEntry 16 }
|
|
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- |
|
|
-- The Stackable Dual Speed Hub Port Configuration Table |
|
|
-- |
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
cssRepeaterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CssRepeaterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of repeater port configurations on each hub
|
|
unit."
|
|
::= { cssRepeaterPort 1 }
|
|
|
|
cssRepeaterPortEntry OBJECT-TYPE
|
|
SYNTAX CssRepeaterPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration parameters for an individual repeater
|
|
port on a hub. The value of rptrPortIndex also
|
|
indicates the physical port number of the port in
|
|
the hub. An entry is created for each repeater port in
|
|
a hub when the hub is connected to the stack. The
|
|
corresponding entries are removed when the hub is
|
|
removed from the stack."
|
|
INDEX { rptrPortGroupIndex, rptrPortIndex}
|
|
::= { cssRepeaterPortTable 1 }
|
|
|
|
CssRepeaterPortEntry ::= SEQUENCE {
|
|
cssRepeaterPortName
|
|
DisplayString,
|
|
cssRepeaterPortControllerRevision
|
|
Integer32,
|
|
cssRepeaterPortSpeedAdmin
|
|
INTEGER,
|
|
cssRepeaterPortSpeedStatus
|
|
INTEGER,
|
|
cssRepeaterPortLinkStatus
|
|
INTEGER
|
|
}
|
|
|
|
cssRepeaterPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A descriptive string of up to 20 characters used
|
|
by the network administrator to name a port."
|
|
::= { cssRepeaterPortEntry 1 }
|
|
|
|
cssRepeaterPortControllerRevision OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the revision number of the port controller."
|
|
::= { cssRepeaterPortEntry 2 }
|
|
|
|
cssRepeaterPortSpeedAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenMbps(1),
|
|
oneHundredMbps(2),
|
|
autoNegotiate(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to tenMbps(1) to operate in 10Mbps speed mode.
|
|
Set to oneHundredMbps(2) to operate in 100Mbps speed
|
|
mode. Set to autoNegotiate(3) to allow the switch
|
|
to negotiate with the other end of the connection.
|
|
|
|
The actual operating speed of the port is given by
|
|
cssRepeaterPortSpeedStatus."
|
|
DEFVAL { autoNegotiate }
|
|
::= { cssRepeaterPortEntry 3 }
|
|
|
|
cssRepeaterPortSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenMbps(1), -- 10 Mbit/s
|
|
oneHundredMbps(2) -- 100 Mbit/s
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operating speed of the port."
|
|
::= { cssRepeaterPortEntry 4 }
|
|
|
|
cssRepeaterPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { link(1), noLink(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current port link status."
|
|
::= { cssRepeaterPortEntry 5 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- |
|
|
-- The Extension Module Switched Port Group |
|
|
-- |
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
cssSwitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CssSwitchPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of switched ports on extension module on a each
|
|
hub unit in the stack."
|
|
|
|
::= { cssSwitchPort 1 }
|
|
|
|
cssSwitchPortEntry OBJECT-TYPE
|
|
SYNTAX CssSwitchPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration parameters for an individual switch
|
|
module port. An entry is created for each switch port
|
|
on a module is inserted into a hub in the stack.
|
|
The corresponding entries are removed when the module
|
|
is removed from the hub in the stack, or if the hub
|
|
is removed from the stack."
|
|
INDEX { rptrGroupIndex, cssSwitchPortModuleID,
|
|
cssSwitchPortPortID }
|
|
::= { cssSwitchPortTable 1 }
|
|
|
|
CssSwitchPortEntry ::= SEQUENCE {
|
|
cssSwitchPortModuleID
|
|
Integer32,
|
|
cssSwitchPortPortID
|
|
Integer32,
|
|
cssSwitchPortName
|
|
DisplayString,
|
|
cssSwitchPortType
|
|
INTEGER,
|
|
cssSwitchPortControllerRevision
|
|
Integer32,
|
|
cssSwitchPortState
|
|
INTEGER,
|
|
cssSwitchPortDuplexAdmin
|
|
INTEGER,
|
|
cssSwitchPortDuplexStatus
|
|
INTEGER,
|
|
cssSwitchPortSpeedAdmin
|
|
INTEGER,
|
|
cssSwitchPortSpeedStatus
|
|
INTEGER,
|
|
cssSwitchPortLinkStatus
|
|
INTEGER
|
|
}
|
|
|
|
cssSwitchPortModuleID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique ID number of a module unit in a hub as used
|
|
in the command line interface."
|
|
::= { cssSwitchPortEntry 1 }
|
|
|
|
cssSwitchPortPortID OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique ID identifying a port on an extension module
|
|
on a hub as used in the command line interface."
|
|
::= { cssSwitchPortEntry 2 }
|
|
|
|
cssSwitchPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A descriptive string of up to 20 characters used by the
|
|
network administrator to name a switch port."
|
|
::= { cssSwitchPortEntry 3 }
|
|
|
|
cssSwitchPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wsX4001(1), -- 10/100 Tx switch module for FastHub 400
|
|
wsX4002(2) -- 100BaseFx switch module for FastHub 400
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of switch module in this hub."
|
|
::= { cssSwitchPortEntry 4 }
|
|
|
|
cssSwitchPortControllerRevision OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The revision number of the port controller."
|
|
::= { cssSwitchPortEntry 5 }
|
|
|
|
cssSwitchPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1), -- switch port enabled
|
|
disabled(2) -- switch port disabled
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to enabled(1) enables the port.
|
|
Setting this object to disabled(2) disables the port."
|
|
DEFVAL { enabled }
|
|
::= { cssSwitchPortEntry 6 }
|
|
|
|
cssSwitchPortDuplexAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullDuplex(1),
|
|
halfDuplex(2),
|
|
autoNegotiate(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to fullDuplex(1) to operate in full duplex mode: port
|
|
will allow simultaneous transmit and receive which can
|
|
double its bandwidth. Set to halfDuplex(2) to operate in
|
|
normal mode. Set to autoNegotiate(3) to allow the switch
|
|
to negotiate the duplex status with the other end of the
|
|
connection."
|
|
DEFVAL { autoNegotiate }
|
|
::= { cssSwitchPortEntry 7 }
|
|
|
|
cssSwitchPortDuplexStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullDuplex(1),
|
|
halfDuplex(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operating duplex mode of the switched port."
|
|
::= { cssSwitchPortEntry 8 }
|
|
|
|
cssSwitchPortSpeedAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenMbps(1),
|
|
oneHundredMbps(2),
|
|
autoNegotiate(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to tenMbps(1) to operate in 10Mbps speed mode. Set to
|
|
oneHundredMbps(2) to operate in 100Mbps speed mode. Set to
|
|
autoNegotiate(3) to allow the switch to negotiate the operating
|
|
speed with the other end of the connection.
|
|
|
|
If the value of object cssSwitchPortType is WS-X4002(2),
|
|
this object will be read-only, because FX module only
|
|
supports 100Mbps speed."
|
|
DEFVAL { autoNegotiate }
|
|
::= { cssSwitchPortEntry 9 }
|
|
|
|
cssSwitchPortSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenMbps(1),
|
|
oneHundredMbps(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operating speed of the switched port."
|
|
::= { cssSwitchPortEntry 10 }
|
|
|
|
cssSwitchPortLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
link(1),
|
|
noLink(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the link STATUS of switch port."
|
|
::= { cssSwitchPortEntry 11 }
|
|
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- | |
|
|
-- The stackable Dual Speed Hub Switch Enterprise Specific Traps |
|
|
-- |
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
-- Notifications
|
|
|
|
ciscoSibuStackableDualSpeedHubNotifications OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIB 2 }
|
|
|
|
ciscoSibuStackableDualSpeedHubNotificationsPrefix OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubNotifications 0 }
|
|
|
|
ciscoSibuStackableDualSpeedHubRptrPortLinkChange NOTIFICATION-TYPE
|
|
OBJECTS { cssRepeaterPortLinkStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated whenever the value of
|
|
cssRepeaterPortLinkStatus changes for a repeater port."
|
|
::= { ciscoSibuStackableDualSpeedHubNotificationsPrefix 1 }
|
|
|
|
ciscoSibuStackableDualSpeedHubSwitchPortLinkChange NOTIFICATION-TYPE
|
|
OBJECTS { cssSwitchPortLinkStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated whenever the value of
|
|
cssSwitchPortLinkStatus changes for a switch port
|
|
on an extension module."
|
|
::= { ciscoSibuStackableDualSpeedHubNotificationsPrefix 2 }
|
|
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- |
|
|
-- The Stackable Dual-Speed Ethernet Hub Enterprise Module comformance |
|
|
-- |
|
|
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
ciscoSibuStackableDualSpeedHubMIBComformance OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIB 3 }
|
|
ciscoSibuStackableDualSpeedHubMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBComformance 1 }
|
|
ciscoSibuStackableDualSpeedHubMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoSibuStackableDualSpeedHubMIBComformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ciscoSibuStackableDualSpeedHubCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the Cisco Stackable Dual-Speed
|
|
Hub products."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoSibuStackableDualSpeedHubGroup,
|
|
ciscoSibuStackableDualSpeedHubRepeaterPortGroup
|
|
}
|
|
|
|
GROUP ciscoSibuStackableDualSpeedHubSwitchPortGroup
|
|
DESCRIPTION
|
|
"Devices that have switched ports modules must implement
|
|
objects in this group."
|
|
::= { ciscoSibuStackableDualSpeedHubMIBCompliances 1 }
|
|
|
|
-- group statements
|
|
|
|
ciscoSibuStackableDualSpeedHubGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cssSystemLinkTraps,
|
|
cssGroupID,
|
|
cssGroupType,
|
|
cssGroupSerialNo,
|
|
cssGroupBoardRevision,
|
|
cssGroupAgentBootVersion,
|
|
cssGroupAgentFirmwareVersion,
|
|
cssGroupAgentStatus,
|
|
cssGroupAgentPhysAddress,
|
|
cssGroupInternalPowerState,
|
|
cssGroupRedundantPowerState,
|
|
cssGroupReset,
|
|
cssGroupConfigDefaultReset,
|
|
cssGroupIsolatedState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of group objects for use with the Cisco
|
|
Stackable Dual-Speed Hub products."
|
|
::= { ciscoSibuStackableDualSpeedHubMIBGroups 1 }
|
|
|
|
ciscoSibuStackableDualSpeedHubRepeaterPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cssRepeaterPortName,
|
|
cssRepeaterPortControllerRevision,
|
|
cssRepeaterPortSpeedAdmin,
|
|
cssRepeaterPortSpeedStatus,
|
|
cssRepeaterPortLinkStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of repeater port objects for use
|
|
with the Cisco Stackable Dual-Speed Hub products."
|
|
::= { ciscoSibuStackableDualSpeedHubMIBGroups 2 }
|
|
|
|
ciscoSibuStackableDualSpeedHubSwitchPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cssSwitchPortModuleID,
|
|
cssSwitchPortPortID,
|
|
cssSwitchPortName,
|
|
cssSwitchPortType,
|
|
cssSwitchPortControllerRevision,
|
|
cssSwitchPortState,
|
|
cssSwitchPortDuplexAdmin,
|
|
cssSwitchPortDuplexStatus,
|
|
cssSwitchPortSpeedAdmin,
|
|
cssSwitchPortSpeedStatus,
|
|
cssSwitchPortLinkStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of switch module port objects for use with
|
|
the Cisco Stackable Dual-Speed Hub products."
|
|
::= { ciscoSibuStackableDualSpeedHubMIBGroups 3 }
|
|
|
|
END
|