MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-MOBILITY-TAP-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

554 lines
18 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-MOBILITY-TAP-MIB.my: Cisco intercept ("tap") MIB for Mobility
-- Gateway products.
--
-- July 2008, Ryan Rueth, Srinivas Goud Aileni, Zaryab Munir.
--
-- Copyright (c) 2008,2010 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-MOBILITY-TAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus,
StorageType,
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
cTap2MediationContentId,
cTap2StreamIndex
FROM CISCO-TAP2-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoMobilityTapMIB MODULE-IDENTITY
LAST-UPDATED "201006160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal:170 W. Tasman Drive
San Jose, CA 95134
USA
Tel:+1 800 553-NETS
E-mail:cs-li@cisco.com"
DESCRIPTION
"This module manages Cisco's intercept feature for
Mobility Gateway Products.
This MIB is used along with CISCO-TAP2-MIB MIB to
intercept Mobility Gateway traffic. CISCO-TAP2-MIB MIB
along with specific filter MIBs like this MIB replace
the CISCO-TAP-MIB MIB.
To create a Mobility intercept, an entry
cmtapStreamEntry is created which contains the filter
details. An entry cTap2StreamEntry of CISCO-TAP2-MIB is
created which is the common stream information for all
kinds of intercepts and type of the specific stream is
set to 'mobility' in this entry."
REVISION "201006160000Z"
DESCRIPTION
"Added a new textual convention:
CmtapLawfulInterceptID.
Added following three objects to cmtapStreamTable.
cmtapStreamLIIdentifier.
cmtapStreamLocationInfo.
cmtapStreamInterceptType.
Added the following new MODULE-COMPLIANCE.
ciscoMobilityTapMIBComplianceRev01.
Added the following new OBJECT-GROUP.
ciscoMobilityTapStreamGroupSup1."
REVISION "201004150000Z"
DESCRIPTION
"Added enumeration 'servedMdn' for mtapStreamCapabilities object
and CmtapSubscriberIDType."
REVISION "200808050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 672 }
ciscoMobilityTapMIBNotifs OBJECT IDENTIFIER
::= { ciscoMobilityTapMIB 0 }
ciscoMobilityTapMIBObjects OBJECT IDENTIFIER
::= { ciscoMobilityTapMIB 1 }
ciscoMobilityTapMIBConform OBJECT IDENTIFIER
::= { ciscoMobilityTapMIB 2 }
cmtapStreamGroup OBJECT IDENTIFIER
::= { ciscoMobilityTapMIBObjects 1 }
CmtapLawfulInterceptID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "256a"
STATUS current
DESCRIPTION
"An octet string containing the Lawful Intercept Identifier
(LIID)assigned to the intercepted target by a law enforcement
agency defined by Communications Assistance for Law Enforcement
Act (CALEA)."
SYNTAX OCTET STRING (SIZE (3..256))
CmtapSubscriberIDType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the type of address that is used to
identify a subscriber. The following types are
currently supported:
unknown: The Subscriber's identifier type is not
known.
msid: A Mobile Subscriber Identity (MSID).
imsi: An International Mobile Subscriber
Identity(IMSI) number.
nai: A Network Access Identifier (NAI).
esn: An Electronic Serial Number (ESN).
servedMdn: Served Mdn(mobile directory number)
is a vendor specific attribute.
It is similar to the class IETF attribute.
Refer to RFC 2865 for vendor
specific attribute format.
Example:dsg-mdn."
SYNTAX INTEGER {
unknown(1),
msid(2),
imsi(3),
nai(4),
esn(5),
servedMdn(6)
}
CmtapSubscriberID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "256a"
STATUS current
DESCRIPTION
"An octet string containing a subscriber's
identification, preferably in human-readable form.
A CmtapStreamSubscriberID value is always interpreted
within the context of an CmtapStreamSubscriberIDType value.
Every usage of the CmtapStreamSubscriberID textual
convention is required to specify the identity that
corresponds to a CmtapStreamSubscriberIDType object."
SYNTAX OCTET STRING (SIZE (3..256))
-- The filter specifics for intercepting Mobility Gateway traffic.
cmtapStreamCapabilities OBJECT-TYPE
SYNTAX BITS {
tapEnable(0),
interface(1),
calledSubscriberID(2),
nonvolatileStorage(3),
msid(4),
imsi(5),
nai(6),
esn(7),
servedMdn(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Mobility Gateway intercept
features that are implemented by this device and are
manageable through this MIB.
tapEnable: set if table entries with
cTap2StreamInterceptEnable set to
'false' are used to pre-screen packets
for intercept; otherwise these entries
are ignored.
interface: SNMP ifIndex Value may be used to
select interception of all data
crossing an interface or set of
interfaces.
nonvolatileStorage: The cmTapStreamTable supports the
ability to store rows in nonvolatile
memory.
calledSubscriberID: The cmtapStreamCalledSubscriberID can
be used to specify intercepts.
Otherwise, this field is disabled.
msid: A Mobile Subscriber Identity (MSID) can
be used in the ID strings to specify
intercepts.
imsi: An International Mobile Subscriber
Identity (IMSI) number can be used ID
strings to specify intercepts.
nai: A Network Access Identifier (NAI) can
be used in the ID strings to specify
intercepts.
esn: An Electronic Serial Number (ESN) can
be used in the ID strings to specify
intercepts.
servedMdn: Vendor specific attribute Served-Mobile Directory
Number(MDN) can be used in the ID strings
to specify intercepts."
::= { cmtapStreamGroup 1 }
-- The "access list" for intercepting calls over Mobility Gateways
cmtapStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmtapStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mobility Stream Table lists the data streams to be
intercepted. The same data stream may be required by multiple
taps.
This essentially provides options for packet selection, only
some of which might be used. For example, if all the traffic to
or from a subscriber is to be intercepted, one would configure
an entry listing SubscriberID along with the SubscriberIDType
corresponding to the stream that one wishes to intercept.
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index,
which indicates the specific intercept stream, permits multiple
classifiers to be used together. For example, an IP stream
and a Mobility stream could both be listed in their respective
tables, yet still correspond to the same Mediation Device
entry.
Entries are added to this table via cmtapStreamStatus in
accordance with the RowStatus convention."
::= { cmtapStreamGroup 2 }
cmtapStreamEntry OBJECT-TYPE
SYNTAX CmtapStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface and many
application interfaces are supported."
INDEX {
cTap2MediationContentId,
cTap2StreamIndex
}
::= { cmtapStreamTable 1 }
CmtapStreamEntry ::= SEQUENCE {
cmtapStreamCalledSubscriberIDType CmtapSubscriberIDType,
cmtapStreamCalledSubscriberID CmtapSubscriberID,
cmtapStreamSubscriberIDType CmtapSubscriberIDType,
cmtapStreamSubscriberID CmtapSubscriberID,
cmtapStreamStorageType StorageType,
cmtapStreamStatus RowStatus,
cmtapStreamLIIdentifier CmtapLawfulInterceptID,
cmtapStreamLocationInfo TruthValue,
cmtapStreamInterceptType INTEGER
}
cmtapStreamCalledSubscriberIDType OBJECT-TYPE
SYNTAX CmtapSubscriberIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the type of address that is stored in the
cmtapStreamCalledSubscriberID string."
DEFVAL { unknown }
::= { cmtapStreamEntry 1 }
cmtapStreamCalledSubscriberID OBJECT-TYPE
SYNTAX CmtapSubscriberID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string used to identify the party being contacted.
The type of this identification is determined by the
cmtapStreamCalledSubscriberIDType object."
::= { cmtapStreamEntry 2 }
cmtapStreamSubscriberIDType OBJECT-TYPE
SYNTAX CmtapSubscriberIDType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the type of address that is stored in the
cmtapStreamSubscriberID string."
DEFVAL { unknown }
::= { cmtapStreamEntry 3 }
cmtapStreamSubscriberID OBJECT-TYPE
SYNTAX CmtapSubscriberID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string used to identify the subscriber to tap.
The type of this indentification is determined by the
cmtapStreamSubscriberIDType object."
::= { cmtapStreamEntry 4 }
cmtapStreamStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of this conceptual row.
If it is set to 'nonVolatile', this entry can be saved into
non-volatile memory."
DEFVAL { volatile }
::= { cmtapStreamEntry 5 }
cmtapStreamStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object manages
creation, modification, and deletion of rows in this table.
When any field must be changed, cmtapStreamStatus must be
first set to 'notInService'."
::= { cmtapStreamEntry 6 }
cmtapStreamLIIdentifier OBJECT-TYPE
SYNTAX CmtapLawfulInterceptID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is an identifier assigned by a Law Enforcement
Agency (LEA) to facilitate LI operations as defined in 3GPP TS
33.108 v8.7.0 standards document."
DEFVAL { "not set" }
::= { cmtapStreamEntry 7 }
cmtapStreamLocationInfo OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates, if the userLocationInfo object should be
included in the Intercept Related Information (IRI) messages
sent by the gateway to mediation gateway(s) for interception
taps.
The userLocationInfo is defined as part of the IRI messages in
3GPP 33.108 v8.7.0 standards document."
DEFVAL { true }
::= { cmtapStreamEntry 8 }
cmtapStreamInterceptType OBJECT-TYPE
SYNTAX INTEGER {
ccOnly(1),
iriOnly(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the intercept type of the tapped stream.
The tap can be provisioned to intercept control messages (IRI)
from the tapped stream, the payload (CC) messages from the
tapped stream or both. The format of these messages in defined
in 3GPP TS 33.108 v8.7.0 standards document.
ccOnly(1) - Content of communication interception only.
iriOnly(2) - Intercept Related Information only.
both(3) - Intercept both: CC and IRI."
DEFVAL { both }
::= { cmtapStreamEntry 9 }
-- Conformance
ciscoMobilityTapMIBCompliances OBJECT IDENTIFIER
::= { ciscoMobilityTapMIBConform 1 }
ciscoMobilityTapMIBGroups OBJECT IDENTIFIER
::= { ciscoMobilityTapMIBConform 2 }
-- compliance statement
ciscoMobilityTapMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
Cisco Intercept MIB for Mobility Gateways"
MODULE -- this module
MANDATORY-GROUPS { ciscoMobilityTapCapabilityGroup }
GROUP ciscoMobilityTapStreamGroup
DESCRIPTION
"Implementation of this group is optional."
OBJECT cmtapStreamCalledSubscriberIDType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamCalledSubscriberID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamSubscriberIDType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamSubscriberID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoMobilityTapMIBCompliances 1 }
ciscoMobilityTapMIBComplianceRev01 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the Cisco
Intercept MIB for Mobility Gateways."
MODULE -- this module
MANDATORY-GROUPS { ciscoMobilityTapCapabilityGroup }
GROUP ciscoMobilityTapStreamGroup
DESCRIPTION
"Implementation of this group is optional."
GROUP ciscoMobilityTapStreamGroupSup1
DESCRIPTION
"Implementation of this group is conditionally mandatory if the
ciscoMobilityTapStreamGroup is implemented and lawful
interception for 4G mobile calls is supported."
OBJECT cmtapStreamCalledSubscriberIDType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamSubscriberIDType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamCalledSubscriberID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamSubscriberID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cmtapStreamStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoMobilityTapMIBCompliances 2 }
-- Units of Conformance
ciscoMobilityTapCapabilityGroup OBJECT-GROUP
OBJECTS { cmtapStreamCapabilities }
STATUS current
DESCRIPTION
"A collection of objects which provide Mobility Gateway
capabilities for the system."
::= { ciscoMobilityTapMIBGroups 1 }
ciscoMobilityTapStreamGroup OBJECT-GROUP
OBJECTS {
cmtapStreamCalledSubscriberIDType,
cmtapStreamCalledSubscriberID,
cmtapStreamSubscriberIDType,
cmtapStreamSubscriberID,
cmtapStreamStorageType,
cmtapStreamStatus
}
STATUS current
DESCRIPTION
"A collection of objects which provide information about
the stream from which we wish to intercept packets."
::= { ciscoMobilityTapMIBGroups 2 }
ciscoMobilityTapStreamGroupSup1 OBJECT-GROUP
OBJECTS {
cmtapStreamLIIdentifier,
cmtapStreamLocationInfo,
cmtapStreamInterceptType
}
STATUS current
DESCRIPTION
"A collection of objects which provide additional information
about the stream from which we wish to intercept packets."
::= { ciscoMobilityTapMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink