MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-FC-SPAN-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

799 lines
27 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-FC-SPAN-MIB.my: Cisco FC SPAN MIB
--
-- December 2002, Charuhas Ghatge
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-FC-SPAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndex FROM IF-MIB
FcList FROM CISCO-ZS-MIB
ciscoMgmt FROM CISCO-SMI;
ciscoFcSpanMIB MODULE-IDENTITY
LAST-UPDATED "200304090000Z"
ORGANIZATION "Cisco Systems Inc. "
CONTACT-INFO
"Cisco Systems
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"MIB module for displaying and configuring
Switched Port Analyzer(SPAN) related features
in a Fibre Channel device.
SPAN is a feature that enables the user to analyze
network traffic, passing through the ports (called
SPAN source ports) in a switched network using
SwitchProbe device attached to a switch port called
SPAN destination (SD) port. SPAN feature is non-
intrusive and does not affect switching of network
traffic for any of the source ports."
REVISION "200304090000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 363 }
ciscoSpanMIBObjects
OBJECT IDENTIFIER ::= { ciscoFcSpanMIB 1 }
cspanConfiguration
OBJECT IDENTIFIER ::= { ciscoSpanMIBObjects 1 }
-- Textual Convention
SessionIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An arbitrary value which identifies a session. "
SYNTAX Unsigned32 (1..4095)
-- The SPAN Session Table
cspanMaxSessions OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of SPAN sessions that this device supports."
::= { cspanConfiguration 1 }
cspanSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cspanSessionTable is a table that lets the user configure
and monitor the SPAN sessions.
A SPAN session represents an association of one destination
port with traffic redirected from different interfaces and
VSANs (Virtual Storage Area Networks).
In most situations, there would be only one active session.
The flexibility to configure multiple sessions is helpful
in sharing the analyzer that is attached to the SPAN
destination port. In other words, the user can configure
multiple sessions, but only one is active.
However, it is possible to have multiple session active at
a given time. The traffic on the SPAN destination port is
the result of the combination of the active sessions."
::= { cspanConfiguration 2 }
cspanSessionEntry OBJECT-TYPE
SYNTAX CspanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SPAN session entry. Each session consists of
session number, session Administrative Status
session OperationStatus, session InactiveReason (if the
session OperationStatus is Inactive) and a rowStatus object
to add/delete sessions.
cspanSessionIndex is the Index of this table that identifies
a session.
To Add a session:
1. Specify the session to be added (cspanSessionIndex)
2. Set the cspanSessionRowStatus to createAndGo (4).
To Delete a session:
1. Specify the session to be deleted (cspanSessionIndex).
2. Set the cspanSessionRowStatus to destroy (6).
"
INDEX { cspanSessionIndex }
::= { cspanSessionTable 1 }
CspanSessionEntry ::=
SEQUENCE {
cspanSessionIndex SessionIndex,
cspanSessionDestIfIndex InterfaceIndex,
cspanSessionAdminStatus INTEGER,
cspanSessionOperStatus INTEGER,
cspanSessionInactiveReason SnmpAdminString,
cspanSessionRowStatus RowStatus
}
cspanSessionIndex OBJECT-TYPE
SYNTAX SessionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary value which identifies a session.
The value of this index must be less than the value
of cspanMaxSessions."
::= { cspanSessionEntry 1 }
cspanSessionDestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of the destination port to be configured
for the session specified by the instance of
cspanSessionIndex."
::= { cspanSessionEntry 2 }
cspanSessionAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to suspend an active session
or activate an inactive session.
Note that setting the value to the existing value
has no effect on the operation. i.e. setting the
value to 'active' when session is 'active' has no
effect."
::= { cspanSessionEntry 3 }
cspanSessionOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the session. "
::= { cspanSessionEntry 4 }
cspanSessionInactiveReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the reason that this session
is not active. This string will be a zero length
string in case the session is active."
::= { cspanSessionEntry 5 }
cspanSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { cspanSessionEntry 6 }
-- Session Source Interface Table
cspanSourcesIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanSourcesIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cspanSourcesIfTable is used to configure source
interfaces for SPAN sessions."
::= { cspanConfiguration 3 }
cspanSourcesIfEntry OBJECT-TYPE
SYNTAX CspanSourcesIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SPAN source interface entry. Each entry consists of
session index, interface index of the source interface,
the ingress or egress direction of the traffic on that
interface and a rowStatus object"
INDEX {
cspanSessionIndex,
cspanSourcesIfIndex,
cspanSourcesDirection
}
::= { cspanSourcesIfTable 1 }
CspanSourcesIfEntry ::=
SEQUENCE {
cspanSourcesIfIndex InterfaceIndex,
cspanSourcesDirection INTEGER,
cspanSourcesRowStatus RowStatus
}
cspanSourcesIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cspanSourcesIfIndex denotes the interface index for
this session."
::= { cspanSourcesIfEntry 1 }
cspanSourcesDirection OBJECT-TYPE
SYNTAX INTEGER {
receive(1),
transmit(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cspanSourcesDirection denotes traffic direction on
the cspanSourcesIfIndex."
::= { cspanSourcesIfEntry 2 }
cspanSourcesRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { cspanSourcesIfEntry 3 }
-- Session Source VSAN Table
cspanSourcesVsanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanSourcesVsanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cspanSourcesVsanTable is used to list source
VSANs for SPAN sessions."
::= { cspanConfiguration 4 }
cspanSourcesVsanEntry OBJECT-TYPE
SYNTAX CspanSourcesVsanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Source VSAN Table.
For the session identified by the instance
of cspanSessionIndex, it lists the VSANs
that comprise the sources."
INDEX { cspanSessionIndex }
::= { cspanSourcesVsanTable 1 }
CspanSourcesVsanEntry ::=
SEQUENCE {
cspanSourcesVsans2k FcList,
cspanSourcesVsans4k FcList
}
cspanSourcesVsans2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VSANs that are traffic sources to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 1 through 8, the second octet specifying VSAN 9
through 16, etc. Since there are 256 octets, the range
of VSANs is from 0-2047. Within each octet, the most
significant bit represents the lowest numbered VSAN id
and the least significant bit represents the highest
numbered VSAN id. Thus each VSAN is represented by a
single bit within the value of this object. If that bit
has value '1' then that VSAN is included in the set of
VSANs; the VSAN is not included if its bit has a
value of '0'.
"
::= { cspanSourcesVsanEntry 1 }
cspanSourcesVsans4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 2048 through 2055, the second octet specifying VSAN
2056 through 2063, etc. Since there are 256 octets,
he range of VSANs is from 2048 through 4095.
Within each octet, the most significant
bit represents the lowest numbered VSAN id and the least
significant bit represents the highest numbered VSAN id.
Thus each VSAN is represented by a single bit within the
value of this object. If that bit has value '1' then
that VSAN is included in the set of VSANs; the VSAN is
not included if its bit has a value of '0'."
::= { cspanSourcesVsanEntry 2 }
-- Session Source VSAN Configuration Table
cspanSourcesVsanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanSourcesVsanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cspanSourcesVsanCfgTable is used to configure sources
VSANs for SPAN sessions.
"
::= { cspanConfiguration 5 }
cspanSourcesVsanCfgEntry OBJECT-TYPE
SYNTAX CspanSourcesVsanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the source Vsan Configuration Table.
Each entry represents either an add or a delete
VSANs operation for the session identified by the
instance of cspanSourcesVsanCfgSessIndex.
The VSANs to be added (or deleted) are specified by
the values of cspanSourcesVsanCfgVsans2k and
cspanSourcesVsanCfgVsans4k."
INDEX { cspanSourcesVsanCfgSessIndex }
::= { cspanSourcesVsanCfgTable 1 }
CspanSourcesVsanCfgEntry ::=
SEQUENCE {
cspanSourcesVsanCfgSessIndex SessionIndex,
cspanSourcesVsanCfgCommand INTEGER,
cspanSourcesVsanCfgVsans2k FcList,
cspanSourcesVsanCfgVsans4k FcList
}
cspanSourcesVsanCfgSessIndex OBJECT-TYPE
SYNTAX SessionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A session index associated with a session for which
the VSANs are to be added/deleted. "
::= { cspanSourcesVsanCfgEntry 1 }
cspanSourcesVsanCfgCommand OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
remove(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command to be executed for this entry.
Only acceptable commands are 'add' and 'remove'.
'none' is returned in case of read operation."
::= { cspanSourcesVsanCfgEntry 2 }
cspanSourcesVsanCfgVsans2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 1 through 8, the second octet specifying VSAN 9
through 16, etc. Since there are 256 octets, the range
of VSANs is from 0-2047. Within each octet, the most
significant bit represents the lowest numbered VSAN id
and the least significant bit represents the highest
numbered VSAN id. Thus each VSAN is represented by a
single bit within the value of this object.
If that bit has value '1' then that VSAN is included
in the set of VSANs; the VSAN is not included if
its bit has a value of '0'."
::= { cspanSourcesVsanCfgEntry 3 }
cspanSourcesVsanCfgVsans4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 2048 through 2055, the second octet specifying VSAN
2056 through 2063, etc.
The range of VSANs is 2048-4095.
Within each octet, the most significant
bit represents the lowest numbered VSAN id and the least
significant bit represents the highest numbered VSAN id.
Thus each VSAN is represented by a single bit within the
value of this object. If that bit has value '1' then
that VSAN is included in the set of VSANs; the VSAN is
not included if its bit has a value of '0'."
::= { cspanSourcesVsanCfgEntry 4 }
-- Session VSAN Filter Table
cspanVsanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanVsanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The cspanVsanFilterTable is used to monitor and
configure VSAN filters for SPAN sessions.
cspanVsanFilterSessIndex denotes the session index of
this sesion.
cspanVsanFilterVsans2k and cspanVsanFilterVsans4k denote
the VSANs in a bit mask fashion for each session.
"
::= { cspanConfiguration 6 }
cspanVsanFilterEntry OBJECT-TYPE
SYNTAX CspanVsanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the VsanFilter Table.
cspanVsanFilterVsans2k and
cspanVsanFilterVsans4k denote the VSANs that
are part of the filter applied to the session
identified by the instance of cspanVsanFilterSessIndex."
INDEX { cspanVsanFilterSessIndex }
::= { cspanVsanFilterTable 1 }
CspanVsanFilterEntry ::=
SEQUENCE {
cspanVsanFilterSessIndex SessionIndex,
cspanVsanFilterVsans2k FcList,
cspanVsanFilterVsans4k FcList
}
cspanVsanFilterSessIndex OBJECT-TYPE
SYNTAX SessionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A session index associated with a session. "
::= { cspanVsanFilterEntry 1 }
cspanVsanFilterVsans2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 1 through 8, the second octet specifying VSAN 9
through 16, etc. Since there are 256 octets, the range
of VSANs is from 0-2047. Within each octet, the most
significant bit represents the lowest numbered VSAN id
and the least significant bit represents the highest
numbered VSAN id. Thus each VSAN is represented by a single
bit within the value of this object. If that bit has value
'1' then that VSAN is included in the set of VSANs; the
VSAN is not included if its bit has a value of '0'."
::= { cspanVsanFilterEntry 2 }
cspanVsanFilterVsans4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 2048 through 2055, the second octet specifying VSAN
2056 through 2063, etc. the range of VSANs is 2048-4095.
Within each octet, the most significant bit represents
the lowest numbered VSAN id and the least significant
bit represents the highest numbered VSAN id. Thus
each VSAN is represented by a single bit within the
value of this object. If that bit has value '1' then
that VSAN is included in the set of VSANs; the VSAN is
not included if its bit has a value of '0'."
::= { cspanVsanFilterEntry 3 }
-- Session VSAN Filter Operations Table
cspanVsanFilterOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CspanVsanFilterOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cspanVsanFilterOpTable is used to configure
VSAN filters for SPAN sessions.
cspanVsanFilterSessIndex denotes the session index of
this sesion.
cspanVsanFilterVsans denotes the VSANs in a bit mask fashion
for each session.
"
::= { cspanConfiguration 7 }
cspanVsanFilterOpEntry OBJECT-TYPE
SYNTAX CspanVsanFilterOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the VsanFilterOp Table. "
INDEX { cspanVsanFilterOpSessIndex }
::= { cspanVsanFilterOpTable 1 }
CspanVsanFilterOpEntry ::=
SEQUENCE {
cspanVsanFilterOpSessIndex SessionIndex,
cspanVsanFilterOpCommand INTEGER,
cspanVsanFilterOpVsans2k FcList,
cspanVsanFilterOpVsans4k FcList
}
cspanVsanFilterOpSessIndex OBJECT-TYPE
SYNTAX SessionIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A session index associated with a session. "
::= { cspanVsanFilterOpEntry 1 }
cspanVsanFilterOpCommand OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
remove(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command to be executed for this entry."
::= { cspanVsanFilterOpEntry 2 }
cspanVsanFilterOpVsans2k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 1 through 8, the second octet specifying VSAN 9
through 16, etc. Within each octet, the most significant
bit represents the lowest numbered VSAN id and the least
significant bit represents the highest numbered VSAN id.
Thus each VSAN is represented by a single bit within the
value of this object. If that bit has value '1' then
that VSAN is included in the set of VSANs; the VSAN is
not included if its bit has a value of '0'."
::= { cspanVsanFilterOpEntry 3 }
cspanVsanFilterOpVsans4k OBJECT-TYPE
SYNTAX FcList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VSANs that are assigned to this session.
Each octet within the value of this object specifies
a set of eight VSANS with the first octet specifying
VSAN 2048 through 2055, the second octet specifying VSAN
2056 through 2063, etc. In each octet, the most significant
bit represents the lowest numbered VSAN id and the least
significant bit represents the highest numbered VSAN id.
Thus each VSAN is represented by a single bit within the
value of this object. If that bit has value '1' then
that VSAN is included in the set of VSANs; the VSAN is
not included if its bit has a value of '0'."
::= { cspanVsanFilterOpEntry 4 }
-- Conformance
ciscoFcSpanMIBConformance
OBJECT IDENTIFIER ::= { ciscoFcSpanMIB 2 }
ciscoFcSpanMIBCompliances
OBJECT IDENTIFIER ::= { ciscoFcSpanMIBConformance 1 }
ciscoFcSpanMIBGroups
OBJECT IDENTIFIER ::= { ciscoFcSpanMIBConformance 2 }
ciscoFcSpanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO-FC-SPAN-MIB."
MODULE MANDATORY-GROUPS {
cspanScalarsGroup,
cspanSessionsGroup,
cspanSourceIfGroup,
cspanSourceVsanGroup,
cspanSourceVsanCfgGroup,
cspanVsanFilterGroup,
cspanVsanFilterOpGroup
}
OBJECT cspanSessionRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
DESCRIPTION
"Only 'createAndGo', 'destroy' and 'active' need to
be supported."
::= { ciscoFcSpanMIBCompliances 1 }
-- Units of Conformance
cspanScalarsGroup OBJECT-GROUP
OBJECTS {
cspanMaxSessions
}
STATUS current
DESCRIPTION
"A collection of scalar objects in this MIB."
::= { ciscoFcSpanMIBGroups 1 }
cspanSessionsGroup OBJECT-GROUP
OBJECTS {
cspanSessionDestIfIndex,
cspanSessionAdminStatus,
cspanSessionOperStatus,
cspanSessionInactiveReason,
cspanSessionRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for sessions configuration."
::= { ciscoFcSpanMIBGroups 2 }
cspanSourceIfGroup OBJECT-GROUP
OBJECTS {
cspanSourcesRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for source interface
configuration."
::= { ciscoFcSpanMIBGroups 3 }
cspanSourceVsanGroup OBJECT-GROUP
OBJECTS {
cspanSourcesVsans2k,
cspanSourcesVsans4k
}
STATUS current
DESCRIPTION
"A collection of objects for source VSANs display."
::= { ciscoFcSpanMIBGroups 4 }
cspanSourceVsanCfgGroup OBJECT-GROUP
OBJECTS {
cspanSourcesVsanCfgCommand,
cspanSourcesVsanCfgVsans2k,
cspanSourcesVsanCfgVsans4k
}
STATUS current
DESCRIPTION
"A collection of objects for source VSANs
configuration."
::= { ciscoFcSpanMIBGroups 5 }
cspanVsanFilterGroup OBJECT-GROUP
OBJECTS {
cspanSourcesVsanCfgVsans2k,
cspanVsanFilterVsans2k,
cspanVsanFilterVsans4k
}
STATUS current
DESCRIPTION
"A collection of objects for filter display
information."
::= { ciscoFcSpanMIBGroups 6 }
cspanVsanFilterOpGroup OBJECT-GROUP
OBJECTS {
cspanVsanFilterOpCommand,
cspanVsanFilterOpVsans2k,
cspanVsanFilterOpVsans4k
}
STATUS current
DESCRIPTION
"A collection of objects for filter operations."
::= { ciscoFcSpanMIBGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink