MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-BUS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

526 lines
16 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-BUS-MIB.my: LANE BUS MIB file
--
-- July 1995, Chris Young
--
-- Copyright (c) 1995-1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-BUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
ciscoMgmt FROM CISCO-SMI
AtmLaneAddress FROM LAN-EMULATION-CLIENT-MIB
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Integer32 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
RowStatus, DisplayString,
TimeStamp FROM SNMPv2-TC;
ciscoBusMIB MODULE-IDENTITY
LAST-UPDATED "9509151702Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems Inc."
DESCRIPTION
" The MIB module for the management of LANE broadcast and
unknown servers."
::= { ciscoMgmt 40 }
ciscoBusMIBObjects OBJECT IDENTIFIER ::= { ciscoBusMIB 1 }
CiscoVpiInteger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" An integer large enough to hold a VPI. In the event
that VC does not exist, the value of an object with
this syntax shall be -1."
SYNTAX INTEGER (-1..255)
CiscoVciInteger ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" An integer large enough to hold a VCI. In the event
that VC does not exist, the value on an object with
this syntax shall be -1."
SYNTAX INTEGER (-1..65535)
busTable OBJECT-TYPE
SYNTAX SEQUENCE OF BusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A (conceptual) table representing all the instantiations
of BUSs on the designated device. This table may or may not
allow the creation of rows depending on whether the LANE
service elements allow the separate creation of LES and BUS
components. In the event that separate components are not
allowed then the MINIMUM-ACCESS detailed in the
MODULE-COMPLIANCE should be used by those BUS implementations"
::= { ciscoBusMIBObjects 1 }
busEntry OBJECT-TYPE
SYNTAX BusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry (conceptual row) in the busTable."
INDEX { busElanName, busIndex }
::= { busTable 1 }
BusEntry ::= SEQUENCE {
busElanName DisplayString,
busIndex INTEGER,
busAtmAddrSpec AtmLaneAddress,
busAtmAddrMask OCTET STRING,
busAtmAddrActl AtmLaneAddress,
busIfIndex Integer32,
busSubIfNum Integer32,
busUpTime TimeStamp,
busLanType INTEGER,
busMaxFrm INTEGER,
busMaxFrmAge INTEGER,
busOutFwdOctets Counter32,
busOutFwdUcastFrms Counter32,
busOutFwdNUcastFrms Counter32,
busFrmTimeOuts Counter32,
busMultiFwdVpi CiscoVpiInteger,
busMultiFwdVci CiscoVciInteger,
busOperStatus INTEGER,
busAdminStatus INTEGER,
busStatus RowStatus
}
busElanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The ELAN name of the designated bridge."
::= { busEntry 1 }
busIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A unique identifier for this particular BUS on this
ELAN. This value must remain constant while the entry
is in existence and during the operation of the agent
(i.e. It is allowed to change after reboot). For
implementations that do not support more than one BUS
entity per ELAN per device, it is sufficient to always
report 1 for this object and only to accept the value
1 for row creation."
::= { busEntry 2 }
busAtmAddrSpec OBJECT-TYPE
SYNTAX AtmLaneAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The specified ATM address of the BUS on the interface
of interest. Note that setting this object will have
the side effect of reinitializing the BUS and
consequently dropping all clients connected to it. If
this object is not specified at row creation time then
the BUS will choose a value for itself and attempt to
register with the switch with that value. If an
address is specified which is not acceptable to the
switch then the busOperStatus will remain inactive
until an acceptable address is set."
::= { busEntry 3 }
busAtmAddrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" An address mask that when used with the
busAtmAddrSpec, specifies the portion of the BUS' ATM
address that is desired to be configured. Note that
setting this object will result in the
reinitialization of the BUS, consequently dropping all
clients connected to it. At row creation time this
object cannot be set without also supplying a value
for the busAtmAddrSpec. If the BUS ATM address is
omitted at creation time then this object defaults to
the value of all zeros (none of the busAtmAddrSpec
value is relevant). If the BUS ATM address is
specified at creation time but this object omitted,
then this object defaults to the value of all ones
(all of the busAtmAddrSpec is relevant)."
::= { busEntry 4 }
busAtmAddrActl OBJECT-TYPE
SYNTAX AtmLaneAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The resultant ATM address in use by the BUS. This
object is a product of the specified ATM address, mask
and interaction with the switch via the ILMI."
::= { busEntry 5 }
busIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The interface that a BUS will forward traffic over.
The value specified for this object must equate to a
value of ifIndex in the ifTable. The interface will
be for that particular ATM port (the physical
interface, not a logical layer on top of it). This
object can only be specified upon row creation and
cannot be altered there after."
::= { busEntry 6 }
busSubIfNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Specifies the sub-interface number that the BUS
will reside on. This sub-interface may be shared with
a LEC or BUS of the same ELAN but is not required to
do so. If no value is specified for this object at
row creation time, then a sub-interface will be chosen
by the agent. This object may only be specified at
row creation time and cannot be altered thereafter."
::= { busEntry 7 }
busUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The value of sysUpTime when this BUS became
enabled."
::= { busEntry 8 }
busLanType OBJECT-TYPE
SYNTAX INTEGER { dot3(1), dot5(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The type of legacy LAN that this LES emulates."
DEFVAL { dot3 }
::= { busEntry 9 }
busMaxFrm OBJECT-TYPE
SYNTAX INTEGER { dot3 (1516),
tr4Mb (4544),
rfc1626 (9234),
tr16Mb (18190) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The maximum frame size that the emulated LAN may
accept."
DEFVAL { dot3 }
::= { busEntry 10 }
busMaxFrmAge OBJECT-TYPE
SYNTAX INTEGER (1..4)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The maximum number of seconds a BUS will hold onto a
packet for forwarding until it is dropped. Dropping a
packet will result in the incrementing of the
busFrmTimeOuts counter."
DEFVAL { 1 }
::= { busEntry 11 }
busOutFwdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of octets that this BUS has forwarded
since its initialization."
::= { busEntry 12 }
busOutFwdUcastFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of frames that the BUS has forwarded
which were unicast data frames including all control
frames (i.e. they were flooded from the client)."
::= { busEntry 13 }
busOutFwdNUcastFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of frames that the BUS has forwarded
which were multicast frames."
::= { busEntry 14 }
busFrmTimeOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of frames dropped by the BUS due to time
out."
::= { busEntry 15 }
busMultiFwdVpi OBJECT-TYPE
SYNTAX CiscoVpiInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The virtual path identifier for the multicast
forward VCC. "
::= { busEntry 16 }
busMultiFwdVci OBJECT-TYPE
SYNTAX CiscoVciInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The virtual channel identifier for the multicast
forward VCC."
::= { busEntry 17 }
busOperStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), inactive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object reflects the actual state of the BUS
which may differ from that of the busAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
busAdminStatus is 'active'."
::= { busEntry 18 }
busAdminStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), inactive(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The desired state of the designated BUS as
prescribed by the operator. The actions of the agent
will, if at all possible, eventually result in the
desired state being reflected in the busOperStatus."
DEFVAL { active }
::= { busEntry 19 }
busStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The status of the BUS entry. This object cannot be
set to active until the busIfIndex object has an
appropiate value. Note that implementations that
do not support separate LES/BUS entities may
refuse row creation in this table. Creation of
BUS entities for those implementation is facilitated
in the LES MIB."
::= { busEntry 20 }
busClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF BusClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A (conceptual) table listing the clients associated
with a BUS. Note that the local or network management
will not create or destroy rows in this table but
may only inspect what LECs are currently joined
with the BUS."
::= { ciscoBusMIBObjects 2 }
busClientEntry OBJECT-TYPE
SYNTAX BusClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry (conceptual) row that denotes a client that
is establishing/has established a multicast send VC to
the BUS."
INDEX { busElanName, busIndex, busClientId }
::= { busClientTable 1 }
BusClientEntry ::= SEQUENCE {
busClientId Integer32,
busClientIfIndex Integer32,
busClientMSendVpi CiscoVpiInteger,
busClientMSendVci CiscoVciInteger,
busClientAtmAddress AtmLaneAddress
}
busClientId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A unique identifier for a LEC which is establishing/
has-established a multicast send VC to the BUS. The
identifier only persists for as long as the LEC is
associated with this particular BUS. If the LEC is
dropped and rejoins the ELAN then a new identifier may
be attributed to it."
::= { busClientEntry 1 }
busClientIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The interface of the uni-directional multicast send
connection between the LEC and BUS."
::= { busClientEntry 2 }
busClientMSendVpi OBJECT-TYPE
SYNTAX CiscoVpiInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The VPI of the uni-directional multicast send
connection between the LEC and BUS."
::= { busClientEntry 3 }
busClientMSendVci OBJECT-TYPE
SYNTAX CiscoVciInteger
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The VCI of the uni-directional multicast send
connection between the LEC and BUS."
::= { busClientEntry 4 }
busClientAtmAddress OBJECT-TYPE
SYNTAX AtmLaneAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The address associated with the LANE client on the
mulicast send VCC."
::= { busClientEntry 5 }
ciscoBusMIBConformance OBJECT IDENTIFIER ::= { ciscoBusMIB 2 }
ciscoBusMIBGroups OBJECT IDENTIFIER ::= { ciscoBusMIBConformance 1 }
ciscoBusMIBCompliances OBJECT IDENTIFIER ::= { ciscoBusMIBConformance 2 }
ciscoBusGroup OBJECT-GROUP
OBJECTS { busAtmAddrSpec, busAtmAddrMask, busAtmAddrActl,
busIfIndex, busUpTime, busLanType, busMaxFrm,
busMaxFrmAge, busOutFwdOctets, busOutFwdUcastFrms,
busOutFwdNUcastFrms, busFrmTimeOuts,
busMultiFwdVpi, busMultiFwdVci, busOperStatus,
busAdminStatus, busStatus }
STATUS current
DESCRIPTION
" A collection of objects for the managing of BUS operation."
::= { ciscoBusMIBGroups 1 }
ciscoBusSubIfGroup OBJECT-GROUP
OBJECTS { busSubIfNum }
STATUS current
DESCRIPTION
" For those implementations that wish to tie their LE service
components to an aflane_802x ifIndex."
::= { ciscoBusMIBGroups 2 }
ciscoBusClientGroup OBJECT-GROUP
OBJECTS { busClientIfIndex, busClientMSendVpi,
busClientMSendVci, busClientAtmAddress }
STATUS current
DESCRIPTION
" A collection of objects for the identification of a
BUS's multicast send VCs."
::= { ciscoBusMIBGroups 3 }
ciscoBusMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
" The compliance statement for SNMP entities that support
Cisco's BUS MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoBusGroup }
GROUP ciscoBusSubIfGroup
DESCRIPTION
" The group of objects necessary to allow multiple LANE
components to share a common ifIndex."
OBJECT busAtmAddrSpec
MIN-ACCESS read-only
DESCRIPTION
"Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAtmAddrSpec object."
OBJECT busAtmAddrMask
MIN-ACCESS read-only
DESCRIPTION
"Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAtmAddrMask object."
OBJECT busIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busIfIndex object."
OBJECT busSubIfNum
MIN-ACCESS read-only
DESCRIPTION
" Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busSubIfNum object."
OBJECT busLanType
MIN-ACCESS read-only
DESCRIPTION
" Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busLanType object."
OBJECT busMaxFrm
MIN-ACCESS read-only
DESCRIPTION
" Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busMaxFrm object."
OBJECT busAdminStatus
MIN-ACCESS read-only
DESCRIPTION
" Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAdminStatus object. The BUS's administrative status
should be controlled via access to the lesAdminStatus.
Refer to CISCO-LES-MIB for details."
::= { ciscoBusMIBCompliances 1 }
END
Reference in New Issue View Git Blame Copy Permalink