MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-ATM-QOS-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

935 lines
29 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-ATM-QOS-MIB.my: Cisco ATM QoS MIB file
--
-- June 2002, Danny Lee
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ATM-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32 FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC
ifIndex FROM IF-MIB
atmVplVpi,
atmVclVpi,
atmVclVci FROM ATM-MIB
AtmServiceCategory FROM ATM-FORUM-TC-MIB
ciscoMgmt FROM CISCO-SMI;
ciscoAtmQosMIB MODULE-IDENTITY
LAST-UPDATED "200206100000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
SA
Tel: +1 800 553-NETS
Email: cs-atm@cisco.com"
DESCRIPTION
"The MIB is created to provide ATM QoS information in
these areas:
1. Traffic shaping on a per-VC basis
2. Traffic shaping on a per-VP basis
3. Per-VC queuing/buffering
Although the initial requirements of the MIB are
driven to support the GSR TAZ line card,
CISCO-ATM-QOS-MIB is designed as a generic MIB to
support ATM interfaces across all platforms.
Here are the tables defined in this MIB:
ciscoAtmQosVccTable
- to provide information on traffic shaping on
a per-VC basis.
ciscoAtmQosVpcTable
- to provide information on traffic shaping on
a per-VP basis.
ciscoAtmQosVcQueuingTable
ciscoAtmQosVcQueuingClassTable
- to provide information on per-VC
queuing/buffering."
REVISION "200206100000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 279 }
ciscoAtmQosMIBNotifs OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 0 }
ciscoAtmQosMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 1 }
ciscoAtmQosMIBConform OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 2 }
caqVccParams OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 1 }
caqVpcParams OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 2 }
caqQueuingParams OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 3 }
--
--
-- Beginning Textual Convention Definitions
VcParamConfigLocation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The configuration source of a vc parameter:
1 - Not configured - using default
2 - Configured on vc directly
3 - VC-class configured on vc
4 - VC-class configured on sub-interface
5 - VC-class configured on main-interface.
"
SYNTAX INTEGER { configDefault(1),
configVcDirect(2),
configVcClass(3),
configVcClassSubInterface(4),
configVcClassInterface(5)
}
VpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"States of virtual path:
1 - Inactive
2 - Active
"
SYNTAX INTEGER { vpStateInactive(1),
vpStateActive(2)
}
-- Ending Textual Convention Definitions
--
--
--
--
-- Per-VC Traffic shaping parameters
-- (Beginning of caqVccTable)
caqVccParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaqVccParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is defined to provide QoS information for
each active ATM VC existing on the interface."
::= { caqVccParams 1 }
caqVccParamsEntry OBJECT-TYPE
SYNTAX CaqVccParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains the ATM QoS parameters provided by
ciscoAtmQosVccEntry."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { caqVccParamsTable 1 }
CaqVccParamsEntry ::= SEQUENCE {
caqVccParamsType AtmServiceCategory,
caqVccParamsPcrIn0 Unsigned32,
caqVccParamsPcrIn01 Unsigned32,
caqVccParamsPcrOut0 Unsigned32,
caqVccParamsPcrOut01 Unsigned32,
caqVccParamsScrIn0 Unsigned32,
caqVccParamsScrIn01 Unsigned32,
caqVccParamsScrOut0 Unsigned32,
caqVccParamsScrOut01 Unsigned32,
caqVccParamsBcsIn0 Unsigned32,
caqVccParamsBcsIn01 Unsigned32,
caqVccParamsBcsOut0 Unsigned32,
caqVccParamsBcsOut01 Unsigned32,
caqVccParamsInheritLevel VcParamConfigLocation,
caqVccParamsMcrIn Unsigned32,
caqVccParamsMcrOut Unsigned32,
caqVccParamsInvRdf Unsigned32,
caqVccParamsInvRif Unsigned32,
caqVccParamsRfl VcParamConfigLocation,
caqVccParamsCdv Unsigned32,
caqVccParamsCdvt Unsigned32,
caqVccParamsIcr Unsigned32,
caqVccParamsTbe Unsigned32,
caqVccParamsFrtt Unsigned32,
caqVccParamsNrm Unsigned32,
caqVccParamsInvTrm Unsigned32,
caqVccParamsInvCdf Unsigned32,
caqVccParamsAdtf Unsigned32
}
caqVccParamsType OBJECT-TYPE
SYNTAX AtmServiceCategory
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The service category of this virtual circuit connection."
::= { caqVccParamsEntry 1 }
caqVccParamsPcrIn0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 2 }
caqVccParamsPcrIn01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of OAM F5 end to end loopback cells sent through
the VCC."
::= { caqVccParamsEntry 3 }
caqVccParamsPcrOut0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 4 }
caqVccParamsPcrOut01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 1 (clp01)."
::= { caqVccParamsEntry 5 }
caqVccParamsScrIn0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 6 }
caqVccParamsScrIn01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."
::= { caqVccParamsEntry 7 }
caqVccParamsScrOut0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 8 }
caqVccParamsScrOut01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."
::= { caqVccParamsEntry 9 }
caqVccParamsBcsIn0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 10 }
caqVccParamsBcsIn01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."
::= { caqVccParamsEntry 11 }
caqVccParamsBcsOut0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0)."
::= { caqVccParamsEntry 12 }
caqVccParamsBcsOut01 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01)."
::= { caqVccParamsEntry 13 }
caqVccParamsInheritLevel OBJECT-TYPE
SYNTAX VcParamConfigLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of configuration for peak cell rate."
::= { caqVccParamsEntry 14 }
caqVccParamsMcrIn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Input Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS."
::= { caqVccParamsEntry 15 }
caqVccParamsMcrOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Output Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS."
::= { caqVccParamsEntry 16 }
caqVccParamsInvRdf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inverse of rate decrease factor."
::= { caqVccParamsEntry 17 }
caqVccParamsInvRif OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inverse of rate increase factor."
::= { caqVccParamsEntry 18 }
caqVccParamsRfl OBJECT-TYPE
SYNTAX VcParamConfigLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of configuration for rate factor."
::= { caqVccParamsEntry 19 }
caqVccParamsCdv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cell delay variation."
::= { caqVccParamsEntry 20 }
caqVccParamsCdvt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cell delay variation tolerance."
::= { caqVccParamsEntry 21 }
caqVccParamsIcr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initial cell rate."
::= { caqVccParamsEntry 22 }
caqVccParamsTbe OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transient buffer exposure."
::= { caqVccParamsEntry 23 }
caqVccParamsFrtt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fixed round-trip time."
::= { caqVccParamsEntry 24 }
caqVccParamsNrm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of tx cells for each forward rm cell."
::= { caqVccParamsEntry 25 }
caqVccParamsInvTrm OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time between forward rm cells."
::= { caqVccParamsEntry 26 }
caqVccParamsInvCdf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inverse of cutoff decrease factor."
::= { caqVccParamsEntry 27 }
caqVccParamsAdtf OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allowed cell rate decrease time factor."
::= { caqVccParamsEntry 28 }
-- (End of caqVccParamsTable)
--
--
--
--
-- Per-VP traffic shaping parameters.
-- (Beginning of caqVpcParamsTable)
caqVpcParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaqVpcParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is defined to provide QoS information for
each active ATM VP existing on the interface."
::= { caqVpcParams 1 }
caqVpcParamsEntry OBJECT-TYPE
SYNTAX CaqVpcParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This list contains the ATM QoS parameters provided by
ciscoAtmQosVpcEntry."
INDEX { ifIndex, atmVplVpi }
::= { caqVpcParamsTable 1 }
CaqVpcParamsEntry ::= SEQUENCE {
caqVpcParamsVpState VpState,
caqVpcParamsPeakRate Unsigned32,
caqVpcParamsCesRate Unsigned32,
caqVpcParamsDataVcCount Integer32,
caqVpcParamsCesVcCount Integer32,
caqVpcParamsVcdF4Seg Integer32,
caqVpcParamsVcdF4Ete Integer32,
caqVpcParamsScr Unsigned32,
caqVpcParamsMbs Unsigned32,
caqVpcParamsAvailBw Unsigned32
}
caqVpcParamsVpState OBJECT-TYPE
SYNTAX VpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VP state of the current permanent virtual path."
::= { caqVpcParamsEntry 1 }
caqVpcParamsPeakRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum rate in kbps at which the associated
permanent virtual path can transmit data."
::= { caqVpcParamsEntry 2 }
caqVpcParamsCesRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum rate in kbps at which CES VCs can transmit
data with the associated permanent virtual path."
::= { caqVpcParamsEntry 3 }
caqVpcParamsDataVcCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of data VCs currently associated with
the permanent virtual path."
::= { caqVpcParamsEntry 4 }
caqVpcParamsCesVcCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CES VCs currently associated with
the permanent virtual path."
::= { caqVpcParamsEntry 5 }
caqVpcParamsVcdF4Seg OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vcd for F4 OAM segment processing."
::= { caqVpcParamsEntry 6 }
caqVpcParamsVcdF4Ete OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vcd for F4 OAM end to end processing."
::= { caqVpcParamsEntry 7 }
caqVpcParamsScr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sustained cell rate associated with the PVP."
::= { caqVpcParamsEntry 8 }
caqVpcParamsMbs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum burst size associated with the PVP."
::= { caqVpcParamsEntry 9 }
caqVpcParamsAvailBw OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bandwidth in Kbps currently currently available
on this PVP."
::= { caqVpcParamsEntry 10 }
-- End of caqVpcParamsTable
--
--
--
--
-- Per-VC queuing parameters
-- Beginning of caqQueuingParamsTable
caqQueuingParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaqQueuingParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides queuing related information
for a VC existing on an ATM interface."
::= { caqQueuingParams 1 }
caqQueuingParamsEntry OBJECT-TYPE
SYNTAX CaqQueuingParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is defined as an entry in caqQueuingParamsTable."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { caqQueuingParamsTable 1 }
CaqQueuingParamsEntry ::= SEQUENCE {
caqQueuingParamsMeanQDepth Unsigned32
}
caqQueuingParamsMeanQDepth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mean Queue Depth associated with the vc. This value
is calculated based on the actual queue depth on the
interface and the exponential weighting constant."
::= { caqQueuingParamsEntry 1 }
-- (End of caqQueuingParamsTable)
--
--
--
--
-- (Beginning of caqQueuingParamsClassTable)
caqQueuingParamsClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF CaqQueuingParamsClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides queuing information for all
queuing classes associating with a VC."
::= { caqQueuingParams 2 }
caqQueuingParamsClassEntry OBJECT-TYPE
SYNTAX CaqQueuingParamsClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is defined as an entry in ciscoAtmQosVcQueuingClassTable
to provide queuing information of a specific class."
INDEX { ifIndex, atmVclVpi, atmVclVci,
caqQueuingParamsClassIndex }
::= { caqQueuingParamsClassTable 1 }
CaqQueuingParamsClassEntry ::= SEQUENCE {
caqQueuingParamsClassIndex Integer32,
caqQueuingParamsClassRandDrp Unsigned32,
caqQueuingParamsClassTailDrp Unsigned32,
caqQueuingParamsClassMinThre Unsigned32,
caqQueuingParamsClassMaxThre Unsigned32,
caqQueuingParamsClassMrkProb Unsigned32
}
caqQueuingParamsClassIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A class index, which associates with an IP precedence
(0 to 8), is defined to reference individual
caqQueuingParamsClassEntry."
::= { caqQueuingParamsClassEntry 1 }
caqQueuingParamsClassRandDrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped when Mean Queue
Length is between Minimum Threshold and
Maximum Threshold range."
::= { caqQueuingParamsClassEntry 2 }
caqQueuingParamsClassTailDrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets dropped because the Mean
Queue Depth exceeds the Maximum Threshold value."
::= { caqQueuingParamsClassEntry 3 }
caqQueuingParamsClassMinThre OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Threshold value in kbps."
::= { caqQueuingParamsClassEntry 4 }
caqQueuingParamsClassMaxThre OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Threshold value in kbps."
::= { caqQueuingParamsClassEntry 5 }
caqQueuingParamsClassMrkProb OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mark probability denominator. This is the value used
in the calculation of a packet being dropped when
the average queue size is between the minimum
threshold and the maximum threshold."
::= { caqQueuingParamsClassEntry 6 }
-- (End of caqQueuingParamsClassTable)
--
--
-- Conformance Information
ciscoAtmQosMIBCompliances OBJECT IDENTIFIER
::= { ciscoAtmQosMIBConform 1 }
ciscoAtmQosMIBGroups OBJECT IDENTIFIER
::= { ciscoAtmQosMIBConform 2 }
-- Compliance Statement
ciscoAtmQosMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
this Cisco ATM QoS MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmQosVccGroup,
ciscoAtmQosVpcGroup,
ciscoAtmQosVcQueuingGroup
}
OBJECT caqVccParamsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsPcrIn0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsPcrIn01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsPcrOut0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsPcrOut01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsScrIn0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsScrIn01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsScrOut0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsScrOut01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsBcsIn0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsBcsIn01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsBcsOut0
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsBcsOut01
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsMcrIn
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsMcrOut
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsInvRdf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsInvRif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsCdvt
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsIcr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsTbe
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsFrtt
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsNrm
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT caqVccParamsInvTrm
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP ciscoAtmQosVccAddon1Group
DESCRIPTION
"This group is optional."
GROUP ciscoAtmQosVpcAddon1Group
DESCRIPTION
"This group is optional."
::= { ciscoAtmQosMIBCompliances 1 }
-- units of conformance:
ciscoAtmQosVccGroup OBJECT-GROUP
OBJECTS {
caqVccParamsType,
caqVccParamsPcrIn0,
caqVccParamsPcrIn01,
caqVccParamsPcrOut0,
caqVccParamsPcrOut01,
caqVccParamsScrIn0,
caqVccParamsScrIn01,
caqVccParamsScrOut0,
caqVccParamsScrOut01,
caqVccParamsBcsIn0,
caqVccParamsBcsIn01,
caqVccParamsBcsOut0,
caqVccParamsBcsOut01,
caqVccParamsInheritLevel,
caqVccParamsMcrIn,
caqVccParamsMcrOut,
caqVccParamsInvRdf,
caqVccParamsInvRif,
caqVccParamsRfl
}
STATUS current
DESCRIPTION
"A collection of objects providing per-VC
ATM QoS related info."
::= { ciscoAtmQosMIBGroups 1 }
ciscoAtmQosVccAddon1Group OBJECT-GROUP
OBJECTS {
caqVccParamsCdv,
caqVccParamsCdvt,
caqVccParamsIcr,
caqVccParamsTbe,
caqVccParamsFrtt,
caqVccParamsNrm,
caqVccParamsInvTrm,
caqVccParamsInvCdf,
caqVccParamsAdtf
}
STATUS current
DESCRIPTION
"Add-on objects providing per-VC
ATM QoS related info."
::= { ciscoAtmQosMIBGroups 2 }
ciscoAtmQosVpcGroup OBJECT-GROUP
OBJECTS {
caqVpcParamsVpState,
caqVpcParamsPeakRate,
caqVpcParamsCesRate,
caqVpcParamsDataVcCount,
caqVpcParamsCesVcCount,
caqVpcParamsVcdF4Seg,
caqVpcParamsVcdF4Ete,
caqVpcParamsScr,
caqVpcParamsMbs
}
STATUS current
DESCRIPTION
"A collection of objects providing per-VP
ATM QoS related info."
::= { ciscoAtmQosMIBGroups 3 }
ciscoAtmQosVpcAddon1Group OBJECT-GROUP
OBJECTS {
caqVpcParamsAvailBw
}
STATUS current
DESCRIPTION
"Add-on objects providing per-VP
ATM QoS related info."
::= { ciscoAtmQosMIBGroups 4 }
ciscoAtmQosVcQueuingGroup OBJECT-GROUP
OBJECTS {
caqQueuingParamsMeanQDepth,
caqQueuingParamsClassRandDrp,
caqQueuingParamsClassTailDrp,
caqQueuingParamsClassMinThre,
caqQueuingParamsClassMaxThre,
caqQueuingParamsClassMrkProb
}
STATUS current
DESCRIPTION
"A collection of objects providing per-VC
queuing/buffering related info."
::= { ciscoAtmQosMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink