mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
710 lines
29 KiB
Plaintext
710 lines
29 KiB
Plaintext
-- *****************************************************************
|
|
-- ATM Access MIB file.
|
|
--
|
|
-- January 1997, Chandrasekaran, Ravikumar
|
|
--
|
|
-- Copyright (c) 1997 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
CISCO-ATM-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC
|
|
ifIndex FROM IF-MIB
|
|
ciscoMgmt FROM CISCO-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
|
|
|
|
ciscoAtmAccessListMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9611100000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-atm@cisco.com"
|
|
DESCRIPTION
|
|
"A cisco ATM access list mib module."
|
|
REVISION "9611180000Z"
|
|
DESCRIPTION
|
|
"Initial Version of this MIB module."
|
|
|
|
::= { ciscoMgmt 67 }
|
|
|
|
ciscoAtmAccessListMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 1 }
|
|
|
|
ciscoAtmAddressTemplate OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 1 }
|
|
|
|
ciscoAtmAddressFilter OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 2 }
|
|
|
|
ciscoAtmAccessGroup OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 3 }
|
|
|
|
-- Textual Conventions:
|
|
|
|
CiscoAtmAddressTemplate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A NSAP address or address template string. If it only contains
|
|
hexadecimal digits, 20-octet long, it represents a single
|
|
NSAP address.
|
|
For example,
|
|
47.0091.8100.0000.0060.3e5b.7201.4000.0c is an NSAP address
|
|
with no wild cards.
|
|
|
|
If it contains one or more wild-card characters, it then
|
|
represents multiple NSAP addresses as follows. An
|
|
ellipsis ... matches any number of leading or trailing
|
|
hexadecimal digits.
|
|
For example,
|
|
12.8344... will match any address that starts with 12.8344 and
|
|
...0201.01 will match any address that ends with 0201.01.
|
|
|
|
An asterisk * can be used to match any single 4-bit nibble
|
|
in an address string.
|
|
For example, in
|
|
47.8*9*1200000000603E5B7201.00603E5B7201.00 the 2nd nibble of
|
|
the 2nd most significant byte and 2nd nibble of 3rd most
|
|
significant byte will match any 4bit nibble value.
|
|
|
|
An asterisk (*) enclosed by a pair of parentheses, can also
|
|
be used to match any binary bit (0 or 1) in a 4-bit nibble.
|
|
For example, in
|
|
...92(1*0*)8.01 the asterisk within parentheses will match
|
|
either binary values 0 and 1."
|
|
SYNTAX DisplayString (SIZE(1..70))
|
|
|
|
-- This MIB defines the following four tables :
|
|
--
|
|
-- ciscoAtmAddressTemplateTable
|
|
--
|
|
--
|
|
-- This table is used to alias the address-templates. The aliases created
|
|
-- in this table may be refered to from ciscoAtmAddressFilterSetTable.
|
|
--
|
|
-- ciscoAtmAddressFilterSetTable
|
|
--
|
|
--
|
|
-- Each row in this table is either an addressFilter or a timeOfDayFilter.
|
|
-- An addressFilter specifies an address-template which can be an actual
|
|
-- address-template or an aliasname defined in the ciscoAtmAddressTemplateTable.
|
|
-- For example,
|
|
-- Consider the following row as existing already in the
|
|
-- ciscoAtmAddressTemplateTable.
|
|
-- atmAddressAliasName = "aaa" ,
|
|
-- atmAddressTemplate."aaa" = "47.8191..." and
|
|
-- atmAddressTemplateRowStatus."aaa" = active
|
|
--
|
|
-- For example, when an object atmAddressFilterSetTemplate."abc" in the
|
|
-- ciscoAtmAddressFilterSetTable is set to a value of "aaa", the value that
|
|
-- gets stored into the object is "47.8191..." which is obtained from the
|
|
-- alias mapping defined by the ciscoAtmAddressTemplateTable.
|
|
--
|
|
-- If no such alias exists in the ciscoAtmAddressTemplateTable whose row is
|
|
-- active, an attempt shall be made to interpret the value as an
|
|
-- address-template itself. In the above example, if the object
|
|
-- atmAddressTemplateRowStatus."aaa" is not 'active' then this set operation
|
|
-- will fail because 'aaa' is not a valid atm address-template.
|
|
--
|
|
-- After the creation of the above filter row, any change to the value of
|
|
-- atmAddressTemplate."aaa" will not affect the value of the object
|
|
-- atmAddressFilterSetTemplate."abc".
|
|
-- For example, if the value of atmAddressTemplate."aaa" is changed to
|
|
-- "...9002.01", the value of atmAddressFilterSetTemplate."abc" in the above
|
|
-- example will still remain "47.8191..."
|
|
--
|
|
-- Those rows(filters) which have the same atmAddressFilterSetName form a
|
|
-- FilterSet. These FilterSets can be combined to Form a Filter Expression.
|
|
-- These FilterSets can also be associated with an interface as an incoming
|
|
-- or an outgoing access-group.
|
|
--
|
|
-- During call filtering, those filters in the filter-set that specify a
|
|
-- complete 20-byte address with no wild cards are first considered for
|
|
-- matching against the address to be filtered.
|
|
-- Only if none of the filters with in a filter-set that specify complete
|
|
-- 20-byte address without wild cards match, other filters are matched
|
|
-- against the address to be filtered in the increasing order of their
|
|
-- atmAddressFilterSetIndex values.
|
|
--
|
|
-- For example, consider the following filter-set "abc"
|
|
--
|
|
-- atmAddressFilterSetType."abc".1 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
|
|
-- atmAddressFilterSetPermission."abc".1 = deny
|
|
--
|
|
-- the second filter is a complete 20-byte address with no wild cards :
|
|
--
|
|
-- atmAddressFilterSetType."abc".2 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".2 =
|
|
-- "47.00918100000000603E5B7201.00603E5B7201.01"
|
|
-- atmAddressFilterSetPermission."abc".2 = deny
|
|
--
|
|
-- the third filter is
|
|
--
|
|
-- atmAddressFilterSetType."abc".5 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
|
|
-- atmAddressFilterSetPermission."abc".5 = deny
|
|
--
|
|
-- In the above example, the filter with index 2 will be matched first with the
|
|
-- address to be filtered. Only if this filter fails to match, the filters
|
|
-- with atmAddressFilterSetIndex values 1 and 5 will be considered in that
|
|
-- order respectively. If none of the filters match in a filter-set then
|
|
-- the default action would be to deny the call. If this is not desired for a
|
|
-- filter-set then a filter with a permission of "permit" and an
|
|
-- address-template value of "..." has to be added to that filter-set as the
|
|
-- last filter i.e., with the highest atmAddressFilterSetIndex value. So those
|
|
-- addresses that dont match any other filter will certainly match the last
|
|
-- default filter and will be permitted to go through.
|
|
--
|
|
-- In the case of the time-of-day filters, if the start-time and the end-time
|
|
-- are the same, it represents a 24-hour interval.
|
|
--
|
|
-- ciscoAtmAddressFilterExpressionTable
|
|
--
|
|
--
|
|
-- This Table is used to define filter expressions out of Filter Sets defined
|
|
-- in the ciscoAtmAddressFilterSetTable and already existing Filter expressions
|
|
-- defined in this table itself.
|
|
--
|
|
-- atmAddressFilterExpressionOperator object in this table supports AND, OR,
|
|
-- XOR, NOT operators. The objects atmAddressFilterExpressionTerm1 and
|
|
-- atmAddressFilterExpressionTerm2 represent the operands. The object
|
|
-- atmAddressFilterExpressionTerm2 should not be used for expressions with
|
|
-- unary operator or no operator(none(5) operator).
|
|
--
|
|
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 can
|
|
-- only point to already active Filter Sets/Filter Expressions. Because of
|
|
-- this, atmAddressFilterSetName and atmAddressFilterExpressionName objects
|
|
-- shall have values that are unique across both ciscoAtmAddressFilterSetTable
|
|
-- and ciscoAtmAddressFilterExpressionTable.
|
|
--
|
|
-- Consider a FilterExpressionEntry for example,
|
|
--
|
|
-- atmAddressFilterExpressionOperator."xyz" = NOT
|
|
-- atmAddressFilterExpressionTerm1."xyz" = "abc"
|
|
--
|
|
-- and the filter-set "abc" has three filters defined in it as follows :
|
|
--
|
|
-- atmAddressFilterSetType."abc".1 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".1 = "47.8191..."
|
|
-- atmAddressFilterSetPermission."abc".1 = deny
|
|
--
|
|
-- the second filter is a complete 20-byte address with no wild cards :
|
|
--
|
|
-- atmAddressFilterSetType."abc".2 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".2 =
|
|
-- "47.00918100000000603E5B7201.00603E5B7201.01"
|
|
-- atmAddressFilterSetPermission."abc".2 = deny
|
|
--
|
|
-- the third filter is
|
|
--
|
|
-- atmAddressFilterSetType."abc".5 = addressFilter
|
|
-- atmAddressFilterSetTemplate."abc".5 = "...9876.01"
|
|
-- atmAddressFilterSetPermission."abc".5 = deny
|
|
--
|
|
-- If the value of atmAddressFilterSetTemplate."abc".5 is changed to "..."
|
|
-- after the filter-expression "xyz" was created, the change will affect
|
|
-- the filter-expression "xyz" too. The same would be true if the objects
|
|
-- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 refer
|
|
-- to already active filter-expressions.
|
|
--
|
|
--
|
|
-- ciscoAtmAccessGroupTable
|
|
--
|
|
--
|
|
-- This table defines the out-going accessGroup and the incoming accessGroup
|
|
-- for an interface. An AccessGroup can be a Filter Set or a Filter Expression.
|
|
--
|
|
|
|
|
|
-- ciscoAtmAddressTemplateTable
|
|
--
|
|
-- This is the ATM address template alias table
|
|
|
|
ciscoAtmAddressTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoAtmAddressTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address template alias Table. Entries in this table can be
|
|
created and deleted by setting the atmAddressTemplateRowStatus object
|
|
to appropriate values. Existing rows can be modified when the row is
|
|
active. Entries in this table can be created/modified/ deleted through
|
|
the commands provided by CLI also."
|
|
::= { ciscoAtmAddressTemplate 1 }
|
|
|
|
ciscoAtmAddressTemplateEntry OBJECT-TYPE
|
|
SYNTAX CiscoAtmAddressTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the address template table."
|
|
INDEX { atmAddressAliasName }
|
|
::= { ciscoAtmAddressTemplateTable 1 }
|
|
|
|
CiscoAtmAddressTemplateEntry ::=
|
|
SEQUENCE {
|
|
atmAddressAliasName DisplayString,
|
|
atmAddressTemplate CiscoAtmAddressTemplate,
|
|
atmAddressTemplateRowStatus RowStatus
|
|
}
|
|
|
|
atmAddressAliasName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alias name for an ATM address template."
|
|
::= { ciscoAtmAddressTemplateEntry 1}
|
|
|
|
atmAddressTemplate OBJECT-TYPE
|
|
SYNTAX CiscoAtmAddressTemplate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Address Template to be aliased."
|
|
::= { ciscoAtmAddressTemplateEntry 2}
|
|
|
|
atmAddressTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create, delete, read and write a row. Entries in this table can be
|
|
modified on the fly. For example, value of atmAddressTemplateObject
|
|
can be changed even when the corresponding atmAddressTemplateRowStatus
|
|
object indicates that the row is active."
|
|
::= { ciscoAtmAddressTemplateEntry 3}
|
|
|
|
-- This group is the ATM address filter set table
|
|
|
|
ciscoAtmAddressFilterSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoAtmAddressFilterSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address filter set Table. Entries in this table can be
|
|
created/deleted by setting the atmAddressFilterSetRowStatus object
|
|
to appropriate values. Existing entries in this table can be modified
|
|
on the fly. Entries in this table can be created/modified/deleted
|
|
through the commands provided by the CLI also."
|
|
::= { ciscoAtmAddressFilter 1 }
|
|
|
|
ciscoAtmAddressFilterSetEntry OBJECT-TYPE
|
|
SYNTAX CiscoAtmAddressFilterSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the address filter set table."
|
|
INDEX { atmAddressFilterSetName,
|
|
atmAddressFilterSetIndex }
|
|
::= { ciscoAtmAddressFilterSetTable 1 }
|
|
|
|
CiscoAtmAddressFilterSetEntry ::=
|
|
SEQUENCE {
|
|
atmAddressFilterSetName DisplayString,
|
|
atmAddressFilterSetIndex INTEGER,
|
|
atmAddressFilterSetType INTEGER,
|
|
atmAddressFilterSetTemplate DisplayString,
|
|
atmAddressFilterSetStartHour INTEGER,
|
|
atmAddressFilterSetStartMinute INTEGER,
|
|
atmAddressFilterSetEndHour INTEGER,
|
|
atmAddressFilterSetEndMinute INTEGER,
|
|
atmAddressFilterSetPermission INTEGER,
|
|
atmAddressFilterSetRowStatus RowStatus
|
|
}
|
|
|
|
atmAddressFilterSetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name for an ATM address filter set."
|
|
::= { ciscoAtmAddressFilterSetEntry 1}
|
|
|
|
atmAddressFilterSetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index for a Filter in an ATM address filter set. The filters are
|
|
matched in the ascending order of atmAddressFilterSetIndex. A filter
|
|
with a lower atmAddressFilterSetIndex value is matched prior to a
|
|
filter with a higher atmAddressFilterSetIndex value. The only
|
|
exception to this rule are those address filters that specify all
|
|
20-bytes without using wildcards. These filters are matched before
|
|
any other wildcard filter in a filter-set irrespective of the
|
|
atmAddressFilterSetIndex value."
|
|
::= { ciscoAtmAddressFilterSetEntry 2}
|
|
|
|
atmAddressFilterSetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
addressFilter(1),
|
|
timeOfDayFilter(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of a filter whether atm Address filter or a
|
|
Time-of-day filter. If the value of this object is addressFilter(1)
|
|
then the objects atmAddressFilterSetStartHour,
|
|
atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour and
|
|
atmAddressFilterSetEndMinute shall contain only the default values and
|
|
cannot be set to any other value. If the value of this object is
|
|
timeOfDayFilter(2) then the object atmAddressFilterSetTemplate shall
|
|
contain only the default value and cannot be set to any other value.
|
|
If the value of this object is modified to timeOfDayFilter(2),
|
|
for an existing addressFilter row, the corresponding
|
|
atmAddressFilterSetTemplate object will be set to its default value
|
|
automatically. If the value of this object is modified to
|
|
addressFilter(1) for an existing timeOfDayFilter row, the corresponding
|
|
objects atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute,
|
|
atmAddressFilterSetEndHour and atmAddressFilterSetEndMinute
|
|
will be set to their default values automatically."
|
|
DEFVAL { addressFilter }
|
|
::= { ciscoAtmAddressFilterSetEntry 3}
|
|
|
|
atmAddressFilterSetTemplate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..70))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is either an existing atmAddressAliasName, or an ATM address
|
|
template, as described in the CiscoAtmAddressTemplate. If the value
|
|
of this object matches an atmAddressAliasName in the
|
|
ciscoAtmAddressTemplateTable, then the value of the corresponding
|
|
atmAddressTemplate object will be used. And subsequent attempts to
|
|
read this object will return the address-template instead of the alias
|
|
name. Only if a such a match is not found in ciscoAtmAddressTemplateTable,
|
|
an attempt can be made to interpret this object as a
|
|
CiscoAtmAddressTemplate. The value of this object shall be '...' and
|
|
cannot be set to any other value if a filter is of the type
|
|
timeOfDayFilter"
|
|
DEFVAL { "..." }
|
|
::= { ciscoAtmAddressFilterSetEntry 4}
|
|
|
|
atmAddressFilterSetStartHour OBJECT-TYPE
|
|
SYNTAX INTEGER (0..23)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Hours portion of the Start time of a Time-of-day
|
|
filter. If the value of atmAddressFilterSetType object is
|
|
addressFilter, then this object cannot be set and shall only
|
|
contain the default value"
|
|
DEFVAL { 0 }
|
|
::= { ciscoAtmAddressFilterSetEntry 5}
|
|
|
|
atmAddressFilterSetStartMinute OBJECT-TYPE
|
|
SYNTAX INTEGER (0..59)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Minutes portion of the Start time of a Time-of-day
|
|
filter. If the value of atmAddressFilterSetType object is
|
|
addressFilter, then this object cannot be set and shall only
|
|
contain the default value"
|
|
DEFVAL { 0 }
|
|
::= { ciscoAtmAddressFilterSetEntry 6}
|
|
|
|
atmAddressFilterSetEndHour OBJECT-TYPE
|
|
SYNTAX INTEGER (0..23)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Hours portion of the End time of a Time-of-day
|
|
filter. If the value of atmAddressFilterSetType object is
|
|
addressFilter, then this object cannot be set and shall only
|
|
contain the default value"
|
|
DEFVAL { 0 }
|
|
::= { ciscoAtmAddressFilterSetEntry 7}
|
|
|
|
atmAddressFilterSetEndMinute OBJECT-TYPE
|
|
SYNTAX INTEGER (0..59)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the Minutes portion of the End time of a Time-of-day
|
|
filter. If the value of atmAddressFilterSetType object is
|
|
addressFilter, then this object cannot be set and shall only
|
|
contain the default value"
|
|
DEFVAL { 0 }
|
|
::= { ciscoAtmAddressFilterSetEntry 8}
|
|
|
|
atmAddressFilterSetPermission OBJECT-TYPE
|
|
SYNTAX INTEGER { permit(1), deny(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the action of a filter set (either permit or deny), when
|
|
a specific ATM address matches with the atmAddressFilterSetTemplate
|
|
defined in this address filter set in case of an addressFilter or
|
|
when the current time falls in the interval specified by the
|
|
atmAddressFilterSetStartHour, atmAddressFiltersetStartMinute,
|
|
atmAddressFilterSetEndHour and atmAddressFiltersetEndMinute objects
|
|
in case of a timeOfDayFilter."
|
|
DEFVAL { permit }
|
|
::= { ciscoAtmAddressFilterSetEntry 9}
|
|
|
|
atmAddressFilterSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create, delete, read and write a row. Entries in this table can be
|
|
modified on the fly. For exmaple, atmAddressFilterSetTemplate object
|
|
of an existing addressFilter can be modified even if the value of the
|
|
corresponding atmAddressFilterSetRowStatus object indicates that the
|
|
row is active."
|
|
::= { ciscoAtmAddressFilterSetEntry 10}
|
|
|
|
-- This group is the ATM address filter expression table
|
|
|
|
ciscoAtmAddressFilterExpressionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoAtmAddressFilterExpressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM address filter expression table. Entries in this table can be
|
|
created/deleted by setting the atmAddressFilterExpressionRowStatus
|
|
object to appropriate values. Existing entries in this table cannot be
|
|
modified on the fly. Before an existing active entry can be modified,
|
|
it has to be brought to notInService by setting the corresponding
|
|
atmAddressFilterExpressionRowStatus object to notInService. Entries
|
|
in this table can also be created/modified/deleted through the commands
|
|
provided by the CLI."
|
|
::= { ciscoAtmAddressFilter 2 }
|
|
|
|
ciscoAtmAddressFilterExpressionEntry OBJECT-TYPE
|
|
SYNTAX CiscoAtmAddressFilterExpressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the address filter expression table."
|
|
INDEX { atmAddressFilterExpressionName }
|
|
::= { ciscoAtmAddressFilterExpressionTable 1 }
|
|
|
|
CiscoAtmAddressFilterExpressionEntry ::=
|
|
SEQUENCE {
|
|
atmAddressFilterExpressionName DisplayString,
|
|
atmAddressFilterExpressionQualifier1 INTEGER,
|
|
atmAddressFilterExpressionTerm1 DisplayString,
|
|
atmAddressFilterExpressionQualifier2 INTEGER,
|
|
atmAddressFilterExpressionTerm2 DisplayString,
|
|
atmAddressFilterExpressionOperator INTEGER,
|
|
atmAddressFilterExpressionRowStatus RowStatus
|
|
}
|
|
|
|
atmAddressFilterExpressionName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name for an ATM address filter expression."
|
|
::= { ciscoAtmAddressFilterExpressionEntry 1}
|
|
|
|
atmAddressFilterExpressionQualifier1 OBJECT-TYPE
|
|
SYNTAX INTEGER { source(1), destination(2), none(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ATM filter set specified by the
|
|
atmAddressFilterExpressionTerm1 should be applied to either the
|
|
source (calling party) or destination (called party) ATM address.
|
|
atmAddressFilterExpressionQualifier1 shall be none(3) if
|
|
atmAddressFilterExpressionTerm1 is a Filter Expression or a
|
|
timeOfDayFilter. The value of this object can be modified for
|
|
an existing row only after placing that row notInService by setting
|
|
the corresponding atmAddressFilterExpressionRowStatus object to
|
|
notInService(2)."
|
|
DEFVAL { destination }
|
|
::= { ciscoAtmAddressFilterExpressionEntry 2}
|
|
|
|
atmAddressFilterExpressionTerm1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the name of the first ATM address filter set or ATM
|
|
address filter expression used in the logical expression. The
|
|
value of this object can only be either an already existing
|
|
atmAddressFilterSetName whose row is already active in the
|
|
ciscoAtmAddressFilterSetTable or an atmAddressFilterExpressionName
|
|
whose row is already active in the ciscoAtmAddressFilterExpressionTable.
|
|
When the reference that this object is pointing to gets deleted out from
|
|
under it, this object may have a value that does not exist in both
|
|
ciscoAtmAddressFilterSetTable and ciscoAtmAddressFilterExpressionTable
|
|
and the expression will be evaluated as if the deleted filter resulted
|
|
in a match with a permission of 'permit'. The value of this object can
|
|
be modified for an existing row only after placing that row notInService
|
|
by setting the corresponding atmAddressFilterExpressionRowStatus object
|
|
to notInService."
|
|
::= { ciscoAtmAddressFilterExpressionEntry 3}
|
|
|
|
atmAddressFilterExpressionQualifier2 OBJECT-TYPE
|
|
SYNTAX INTEGER { source(1), destination(2), none(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the ATM filter set or filter expression specified by the
|
|
atmAddressFilterExpressionTerm2 should be applied to either the
|
|
source (calling party) or destination (called party) ATM address.
|
|
It is not used if the logical operator is NOT.
|
|
atmAddressFilterExpressionQualifier2 shall be none(3) if
|
|
atmAddressFilterExpressionTerm2 is a Filter Expression or
|
|
timeOfDayFilter. The value of this object can be modified for an
|
|
existing row only after placing the row notInService by setting
|
|
the corresponding atmAddressFilterExpressionRowStatus object to
|
|
notInService(2)."
|
|
DEFVAL { destination }
|
|
::= { ciscoAtmAddressFilterExpressionEntry 4}
|
|
|
|
atmAddressFilterExpressionTerm2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the second ATM address filter set or ATM address filter
|
|
expression used in the logical expression. The value of this object
|
|
can only be either an existing atmAddressFilterSetName whose row is
|
|
already active in the ciscoAtmAddressFilterSetTable or an existing
|
|
atmAddressFilterExpressionName whose row is already active in the
|
|
ciscoAtmAddressFilterExpressionTable. The value of this object shall
|
|
be null if the value of corresponding atmAddressFilterExpressionOperator
|
|
object is not(4) or none(5). When the reference that this object is
|
|
pointing to gets deleted out from under it, this object may have a value
|
|
that does not exist in both ciscoAtmAddressFilterExpressionTable and
|
|
ciscoAtmAddressFilterSetTable and the expression will be evaluated
|
|
as if the deleted filter resulted in a match with a permission of
|
|
'permit'. The value of this object can be modified for an existing
|
|
row only after placing that row notInService by setting the respective
|
|
atmAddressFilterExpressionRowStatus object to the value notInService."
|
|
::= { ciscoAtmAddressFilterExpressionEntry 5}
|
|
|
|
atmAddressFilterExpressionOperator OBJECT-TYPE
|
|
SYNTAX INTEGER { and(1), or(2), xor(3), not(4), none(5) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The logical operator to be applied to the associated ATM address
|
|
filter logical expression. The value of this object can be modified
|
|
for an existing row only after placing that row notInService by setting
|
|
the corresponding atmAddressFilterExpressionRowStatus object to the
|
|
value notInService."
|
|
::= { ciscoAtmAddressFilterExpressionEntry 6}
|
|
|
|
atmAddressFilterExpressionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create, delete, read and write a row. Existing entries in this table
|
|
that are active cannot be modified on the fly. Before an existing entry
|
|
in this table that is active can be modified, the corresponding
|
|
atmAddressFilterExpressionRowStatus object has to be set to notInService."
|
|
::= { ciscoAtmAddressFilterExpressionEntry 7}
|
|
|
|
-- This group is the ATM access group table
|
|
|
|
ciscoAtmAccessGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CiscoAtmAccessGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ATM access group Table. This table shall only include interfaces
|
|
whose ifType is atm(37) or logicalAtm(80). Entries in this table can
|
|
be modified through the commands provided by the CLI also."
|
|
::= { ciscoAtmAccessGroup 1 }
|
|
|
|
ciscoAtmAccessGroupEntry OBJECT-TYPE
|
|
SYNTAX CiscoAtmAccessGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ATM access group table. This table shall only
|
|
include interfaces whose ifType is atm(37) or logicalAtm(80)"
|
|
INDEX { ifIndex }
|
|
::= { ciscoAtmAccessGroupTable 1 }
|
|
|
|
CiscoAtmAccessGroupEntry ::=
|
|
SEQUENCE {
|
|
atmInboundAccessGroupName DisplayString,
|
|
atmOutboundAccessGroupName DisplayString
|
|
}
|
|
|
|
atmInboundAccessGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of an ATM address filter set or expression used for access
|
|
control for inbound call on the associated interface."
|
|
::= { ciscoAtmAccessGroupEntry 1}
|
|
|
|
atmOutboundAccessGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of an ATM address filter set or expression used for access
|
|
control for outbound call on the associated interface."
|
|
::= { ciscoAtmAccessGroupEntry 2}
|
|
|
|
|
|
-- conformance information
|
|
|
|
ciscoAtmAccessListMIBConformance
|
|
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 3 }
|
|
ciscoAtmAccessListMIBCompliances
|
|
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 1 }
|
|
ciscoAtmAccessListMIBGroups
|
|
OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
ciscoAtmAccessListMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the Cisco ATM access list group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ciscoAtmAccessListMIBGroup }
|
|
|
|
::= { ciscoAtmAccessListMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
ciscoAtmAccessListMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
atmAddressTemplate,
|
|
atmAddressTemplateRowStatus,
|
|
atmAddressFilterSetType,
|
|
atmAddressFilterSetTemplate,
|
|
atmAddressFilterSetStartHour,
|
|
atmAddressFilterSetStartMinute,
|
|
atmAddressFilterSetEndHour,
|
|
atmAddressFilterSetEndMinute,
|
|
atmAddressFilterSetPermission,
|
|
atmAddressFilterSetRowStatus,
|
|
atmAddressFilterExpressionQualifier1,
|
|
atmAddressFilterExpressionTerm1,
|
|
atmAddressFilterExpressionQualifier2,
|
|
atmAddressFilterExpressionTerm2,
|
|
atmAddressFilterExpressionOperator,
|
|
atmAddressFilterExpressionRowStatus,
|
|
atmInboundAccessGroupName,
|
|
atmOutboundAccessGroupName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { ciscoAtmAccessListMIBGroups 1 }
|
|
END
|