MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/BASIS-SHELF-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1115 lines
30 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- BASIS SHELF MIB
--
-- August 2001
--
-- Copyright (c) 1996-2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- LAST-UPDATED "200109210000Z"
-- DESCRIPTION "This MIB contains information on the shelf and
-- redundancy configuration.
-- The shelf information constitutes the card types
-- for the front modules and the module state.
--
-- The redundancy information constitutes the
-- configuring the redundancy between the service modules
-- and service resource modules."
--
-- REVISION "200109210000Z"
-- DESCRIPTION
-- "Added following enumerations in <shelfFunctionModuleState>,
-- <redPrimaryState> and <redSecondaryState>
-- notResponding(14)
-- cardinit(17)
-- "
--
-- REVISION "200108230000Z"
-- DESCRIPTION
-- "-
--
BASIS-SHELF-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
basisShelf,axisRedundancy FROM BASIS-MIB;
-- shelfTable OBJECT IDENTIFIER ::= {basisShelf 1}
-- shelfNumOfValidEntries OBJECT IDENTIFIER ::= {basisShelf 2}
-- shelfNodeName OBJECT IDENTIFIER ::= {basisShelf 3}
-- shelfDate OBJECT IDENTIFIER ::= {basisShelf 4}
-- shelfTime OBJECT IDENTIFIER ::= {basisShelf 5}
-- shelfTmZn OBJECT IDENTIFIER ::= {basisShelf 6}
-- shelfTmZnGMTOff OBJECT IDENTIFIER ::= {basisShelf 7}
-- shelfBkPlnType OBJECT IDENTIFIER ::= {basisShelf 8}
-- shelfBkplnSerialNum OBJECT IDENTIFIER ::= {basisShelf 9}
-- statsMasterIpAddress OBJECT IDENTIFIER ::= {basisShelf 10}
-- statsCollectionInterval OBJECT IDENTIFIER ::= {basisShelf 11}
-- statsBucketInterval OBJECT IDENTIFIER ::= {basisShelf 12}
-- userName OBJECT IDENTIFIER ::= {basisShelf 13}
-- shelfIntegratedAlarm OBJECT IDENTIFIER ::= {basisShelf 14}
-- shelfAlarmCardBitMap OBJECT IDENTIFIER ::= {basisShelf 15}
-- axisFeederTkNo OBJECT IDENTIFIER ::= {basisShelf 16}
-- axisSvcBillingColInterval OBJECT IDENTIFIER ::= {basisShelf 17}
-- axisSvcBillingBucketInterval OBJECT IDENTIFIER ::= {basisShelf 18}
-- apsIpAddress OBJECT IDENTIFIER ::= {basisShelf 19}
-- redundantApsIpAddress OBJECT IDENTIFIER ::= {basisShelf 20}
-- axisSvcBilling OBJECT IDENTIFIER ::= {basisShelf 21}
-- shelfCBClkRateTable OBJECT IDENTIFIER ::= {basisShelf 22}
-- shelfPowerSupplyVoltage OBJECT IDENTIFIER ::= {basisShelf 23}
--
--
-- shelf table
--
--
-- ----------------------------------------------------------------
shelfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table has the Physical slot number and state of the cards
"
::= { basisShelf 1 }
shelfEntry OBJECT-TYPE
SYNTAX ShelfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry for the slot
"
INDEX { shelfNum, shelfSlotNum }
::= { shelfTable 1}
ShelfEntry ::=
SEQUENCE {
shelfNum
INTEGER,
shelfSlotNum
INTEGER,
shelfBkplnSerialNumDeprecated
INTEGER,
shelfFunctionModuleState
INTEGER,
shelfFunctionModuleType
INTEGER,
shelfFunctionModuleHoldReset
INTEGER
}
shelfNum OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each shelf. Its value
ranges between 1 and the maxvalue of shelfNumber.
"
::= { shelfEntry 1 }
shelfSlotNum OBJECT-TYPE
SYNTAX INTEGER (1..33)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot number of a card.
BASIS can have maximum 16 slots in one shelf.
17 is used to reset the whole shelf.
Some MGX Series can have maximum 32 slots in one shelf.
33 is used to reset the whole shelf.
For MGX8220:
INTEGER (1..17)
For other selected MGX series:
INTEGER (1..33)
"
::= { shelfEntry 2 }
shelfBkplnSerialNumDeprecated OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry has been deprecated. It is available as the 9th
entry in basisShelf. It is included here to prevent a hole
in the shelfEntry table.
"
::= { shelfEntry 3 }
shelfFunctionModuleState OBJECT-TYPE
SYNTAX INTEGER{
nocard (1),
standby (2),
active (3),
failed (4),
selfTest (5),
heldInReset (6),
boot (7),
mismatch (8),
unknown (9),
coreCardMismatch (10),
blocked (11),
reserved (12),
-- hold state applies to PXM during Graceful Upgrade.
hold (13),
notResponding (14),
cardinit (17)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the status of a card in a particular shelf-slot.
The hold state is applicable only to MGX8800 Platform.
The Slave PXM assumes the hold state during PXM Upgrades. In this
state the Slave PXM will be running a different fw but will be
receiving all Standby updates(BRAM and Database).
The description for the two new states is as follows:
'notResponding' - Response from the Service module has become slow
probably due to overloading of CPU.
No recovery action is required on user part.
At present, this state is implemented only for RPM card.
'cardinit' - When the physical presence of card has been detected
but the communication hasn't yet been established between the
controller card (PXM) and Service Module.
"
::= { shelfEntry 4 }
shelfFunctionModuleType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
asc (2),
bnm-T3 (10),
bnm-E3 (11),
bnm-155 (12),
srm-4T1E1 (20),
srm-3T3 (21),
-- SRME cards
srme-1OC3 (22),
srme-1STS3(23),
srme-NOBC(24),
srm-3T3-NOBC(25),
frsm-4T1 (30),
frsm-4E1 (31),
frsm-4T1-C(32),
frsm-4E1-C(33),
-- HSSI:
frsm-hs1 (34),
-- HSSI
frsm-8T1 (35),
frsm-8E1 (36),
frsm-hs1b (37),
ausm-4T1 (40),
ausm-4E1 (41),
ausm-8T1 (50),
ausm-8E1 (51),
-- AUSM Model B :
ausmB-8T1 (52),
ausmB-8E1 (53),
cesm-4T1 (60),
cesm-4E1 (61),
imatm-T3T1 (70),
imatm-E3E1 (71),
imatmB-T1 (72),
imatmB-E1 (73),
frasm-8T1 (80),
cesm-8T1 (90),
cesm-8E1 (91),
-- SM from Netro
bscsm-2 (100),
bscsm-4 (101),
-- testers
atmt-8T1 (110),
atmt-8E1 (111),
frt-8T1 (120),
frt-8E1 (121),
-- frsm_vhs cards
frsm-2ct3 (130),
frsm-2t3 (131),
frsm-2e3 (132),
frsm-hs2 (133),
frsm-2t3b (134),
frsm-2e3b (135),
frsm-hs2b-hssi (136),
frsm-hs2b-12In1 (137),
cesm-T3 (140),
cesm-E3 (141),
-- VISM
vism-8T1 (150),
vism-8E1 (151),
pxm1 (1000),
pxm1-2t3e3 (1001),
pxm1-4oc3 (1002),
pxm1-oc12 (1003),
rpm (2000),
rpm-pr (2001)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the type of a card in
a particular shelf-slot.
"
DEFVAL { other }
::= { shelfEntry 5 }
shelfFunctionModuleHoldReset OBJECT-TYPE
SYNTAX INTEGER {
doNotHold (1),
holdInReset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object holds the card in
a particular shelf-slot, in reset,
If the object is set to holdInReset.
If the object is set to doNotHold, then
it only reset the card in the specified
slot, if slot number is 17 then it'll
reset the whole shelf.
"
::= { shelfEntry 6 }
-- --------------------------------------------------------------
shelfNumOfValidEntries OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of rows in shelfTable.
In some MGX series, it is equal to the number of slots
in the shelf.
"
::= { basisShelf 2 }
shelfNodeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Has the node name of BASIS for MGX8220 only.
For others NodeName supplied by PAR will be returned,
A set on this MIB is not allowed.
The NodeName of the shelf can be set using
the PAR MIB.
"
::= { basisShelf 3 }
shelfDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets/gets the DATE. The syntax is mm/dd/yyyy
"
DEFVAL { "01/01/1994" }
::= { basisShelf 4 }
shelfTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object sets/gets the TIME. The syntax is hh:mm:ss
"
DEFVAL { "12:00:00" }
::= { basisShelf 5 }
shelfTmZn OBJECT-TYPE
SYNTAX INTEGER{
gmt (1),
est (2),
cst (3),
mst (4),
pst (5),
edt (6),
cdt (7),
mdt (8),
pdt (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Object defines standard time. GMT for greenwich mean time,
est for Eastern std time (USA EST).
cst for Central std time (USA CST).
mst for Mountain std time (USA MST).
pst for Pacific std time (USA PST).
edt for Eastern daylight time (USA EDT).
cdt for Central daylight time (USA CDT).
mdt for Mountain daylight time (USA MDT).
pdt for Pacific daylight time (USA PDT).
To define a std time that are not defined in here use the
GMT and set the offset from the GMT in the shelfTmZnGMTOff object.
"
DEFVAL { pst }
::= { basisShelf 6 }
shelfTmZnGMTOff OBJECT-TYPE
SYNTAX INTEGER (-12..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the offset from greenwich mean time in
hours, if configuring for std time in shelfTmZn object, set this
object to 0. If configuring for non standard times use this
object as an offset from the GMT.
"
DEFVAL { 0 }
::= { basisShelf 7 }
shelfBkPlnType OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the back plane type.
The possible values are :
1 - For 336Mbps backplane
2 - For 1.2Gbps backplane
3 - For 45Gbps backplane
"
::= { basisShelf 8 }
shelfBkplnSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..11))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each shelf, entered in nvram
by manf. The serial No. is on the non-volatile RAM on the
backplane.
"
::= { basisShelf 9 }
statsMasterIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of the Stats Master.
"
::= { basisShelf 10 }
statsCollectionInterval OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Statistics collection interval (in minutes).
"
DEFVAL { 0 }
::= { basisShelf 11 }
statsBucketInterval OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Statistics bucket interval (in minutes).
"
DEFVAL { 0 }
::= { basisShelf 12 }
userName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"username of the person logging in or logging out. used only in traps
currently only limit to 12 chars
"
::= { basisShelf 13 }
shelfIntegratedAlarm OBJECT-TYPE
SYNTAX INTEGER {
clear (1),
minor (2),
major (3),
critical (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm status of the shelf.An implementation may not support
all the values.
possible values are :
clear (1) : shelf is not in alarm
minor (2) : Indicates that a non-service affecting condition
has occurred and that corrective action should
be taken in order to prevent a more serious fault.
major (3) : Indicates that a service affecting condition
has occurred and urgent corrective action is
required.
critical (4) : Indicates that a service affecting condition has
occurred and immediate corrective action is required.
The definition for minor(2),major(3),critical(4) are taken from
Bell Core document : GR-1248-CORE.
"
DEFVAL { clear }
::= { basisShelf 14 }
shelfAlarmCardBitMap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"
default value is 0, none of the cards is in alarm
bit position represents the card physical slot
number which is in alarm
"
DEFVAL { 0 }
::= { basisShelf 15 }
apsIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the IP address of the APS"
::= {basisShelf 19}
redundantApsIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the IP address of the redundant APS"
::= {basisShelf 20}
axisFeederTkNo OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ASC creates its cell/frame file based on the feeder trunk number."
::= { basisShelf 16}
axisSvcBillingColInterval OBJECT-TYPE
SYNTAX INTEGER {
a0minutes (1),
a15minutes (2),
a30minutes (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SVC billing collection interval (in 0, 15, 30 minute steps).
"
DEFVAL { a30minutes }
::= { basisShelf 17 }
axisSvcBillingBucketInterval OBJECT-TYPE
SYNTAX INTEGER {
a0minutes (1),
a5minutes (2),
a15minutes (3),
a30minutes (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SVC billing bucket interval (in 0, 5, 15, 30 minute steps).
"
DEFVAL { a15minutes }
::= { basisShelf 18 }
axisSvcBilling OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SVC billing feature.
"
DEFVAL {disable}
::= { basisShelf 21}
shelfCBClkRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfCBClkRateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table has the Clock Rates of each Cell Bus
"
::= { basisShelf 22 }
shelfCBClkRateEntry OBJECT-TYPE
SYNTAX ShelfCBClkRateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry for the Cell Bus
"
INDEX { cBNum }
::= { shelfCBClkRateTable 1}
ShelfCBClkRateEntry ::=
SEQUENCE {
cBNum
INTEGER,
clkRate
INTEGER
}
cBNum OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number (1-8) designation for the Cell Bus.
"
::= { shelfCBClkRateEntry 1 }
clkRate OBJECT-TYPE
SYNTAX INTEGER {
twentyOne-Mhz (1),
fortyTwo-Mhz (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Cell Bus Clock Rate designation.
"
::= { shelfCBClkRateEntry 2 }
shelfPowerSupplyVoltage OBJECT-TYPE
SYNTAX INTEGER {
two-twenty (1),
one-ten (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power Supply voltage rating for some selected
MGX Series.
two-twenty (1): 220Volts AC.
one-ten (2): 110Volts AC.
"
::= { basisShelf 23}
-- ----------------------------------------------------------------
--
-- Group "axisRedundancy"
-- This group contains information of the redundancy mapping
--
-- Terminology:
--
-- Core-Card set in MGX8220 includes : ASC,BNM and SRM
-- ASC - Axis Shelf Controller
-- BNM - Broadband Network Module
-- SRM - Service Redundancy/Resource Module
--
-- Core-Card set in MGX8850 includes : PXM,SRM
-- PXM - Processor Switch Module
-- SRM - Service Redundancy/Resource module
--
-- Core-Card set in some systems include : PXM only
--
-- The slot numbers where the Core-Card set can be plugged in may
-- be different in different products.
--
-- A "redundant pair" is a set of cards/modules that may operate
-- in a redundant manner. At any time one or more cards/modules
-- of the pair are 'active', while other is 'standby', such
-- that if an active member fails,one of the standby member becomes
-- active instead.
--
smRedMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmRedMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table has the redundancy map for a service module.
This table is for configuring redundancy for service modules.
This table might contain entries for Core-Card set,in some
implementations.
"
::= { axisRedundancy 1 }
smRedMapEntry OBJECT-TYPE
SYNTAX SmRedMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry for module(Service Module,Core-Card set) redundancy.
Some implementations might have entries for the core-card set.
The entries for core-card set may not be added , modified or deleted.
An entry has to be created in this table to configure Service Modules
in redundant configuration.
For a 1:1 (Y cable ) redundancy configuration,an entry exists for
each redundant pair with redPrimarySlotNum as the index.
For 1:N Redundancy configuration,an entry exists with different
primary slot numbers(redPrimarySlot value) with the same
secondary slot numbers(redSecondarySlot value).
"
INDEX { redPrimarySlotNum }
::= { smRedMapTable 1}
SmRedMapEntry ::=
SEQUENCE {
redPrimarySlotNum
INTEGER,
redRowStatus
INTEGER,
redPrimaryType
INTEGER,
redPrimaryState
INTEGER,
redSecondarySlotNum
INTEGER,
redSecondaryType
INTEGER,
redSecondaryState
INTEGER,
redType
INTEGER,
redCoveringSlot
INTEGER,
redFeature
INTEGER,
redLineModuleType
INTEGER
}
redPrimarySlotNum OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The index to the table. This is the slot number of the
primary module in the redundant configuration.
For MGX8850 Release 1.x,skip PXM slot 7,8,23,24, SRM slot 15,16,31,32.
For MGX8220(Formerly known as AXIS), values 5-14 are supported.
For systems, where the entries are created by the agent
for the Core-Card set, the implied slot numbers are used
for this object. The implied slot number values are depend
on the system.
"
::= { smRedMapEntry 1 }
redRowStatus OBJECT-TYPE
SYNTAX INTEGER {
add(1),
del(2),
mod(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This will add, delete or modify the redundancy
Note that mod is NOT used but it is there for consistency.
This object is for creating and deleting an entry in
smRedMapTable.
This object is set to add(1) to create an entry in the table.
The values of redPrimarySlot and redSecondarySlot objects
constitute the redundant Pairs. The slot numbers specified for
redPrimarySlot and redSecondarySlot should be in the same half
of the shelf for half-height service modules.
This object is set to del(2) to delete an entry from the table.
"
DEFVAL { del }
::= { smRedMapEntry 2 }
redPrimaryType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
bsc (2),
aum-T3 (10),
tim (20),
frsm-4T1 (30),
frsm-4E1 (31),
frsm-hs1 (34),
frsm-8T1 (35),
frsm-8E1 (36),
frsm-hs1b (37),
ausm-4T1 (40),
ausm-4E1 (41),
ausm-8T1 (50),
ausm-8E1 (51),
-- AUSM Model B
ausmB-8T1 (52),
ausmB-8E1 (53),
cesm-4T1 (60),
cesm-4E1 (61),
imatm-T3T1 (70),
imatm-E3E1 (71),
imatmB-T1 (72),
imatmB-E1 (73),
frasm-8T1 (80),
cesm-8T1 (90),
cesm-8E1 (91),
-- SM from Netro
bscsm-2 (100),
bscsm-4 (101),
-- frsm_vhs cards
frsm-2ct3 (130),
frsm-2t3 (131),
frsm-2e3 (132),
frsm-hs2 (133),
frsm-2t3b (134),
frsm-2e3b (135),
frsm-hs2b-hssi (136),
frsm-hs2b-12In1 (137),
-- cesm-t3e3 cards
cesm-T3 (140),
cesm-E3 (141),
-- testers
atmt-8T1 (110),
atmt-8E1 (111),
frt-8T1 (120),
frt-8E1 (121),
-- VISM
vism-8T1 (150),
vism-8E1 (151),
-- reserved for MGX8850 after 1000
pxm1 (1000),
pxm1-2t3e3 (1001),
pxm1-4oc3 (1002),
pxm1-oc12 (1003),
rpm (2000),
rpm-pr (2001)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the type of the primary card
Some of the card types are not supported in the table but
they are defined here for consistency with the shelf card types.
"
::= { smRedMapEntry 3 }
redPrimaryState OBJECT-TYPE
SYNTAX INTEGER{
nocard (1),
standby (2),
active (3),
failed (4),
selfTest (5),
heldInReset (6),
boot (7),
mismatch (8),
unknown (9),
unusedCoreCardMisMatch (10),
blocked (11),
reserved (12),
-- Hold state applies to PXM during Graceful Upgrade.
unusedHold (13),
notResponding (14),
cardinit (17)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the state of the primary card
Some of the states are not supported in the table but
they are defined here for consistency with the cardStates.
heldInReset, boot and unknown are not supported.
Supported values are :
nocard (1) : Module not present in the slot
standby (2) : Module is in 'standby' state
active (3) : Module is in 'active' state
failed (4) : Module is in 'failed' state due to some condition
selfTest(5) : Module is performing selftest
mismatch(8) : Module is not compatible with the current configuration
or a wrong type of back-card/line-module is plugged in.
notResponding(14) : Response from the Service module has become slow
probably due to overloading of CPU.
No recovery action is required on user part.
At present, this state is implemented only for RPM card.
cardinit(17) : When the physical presence of card has been detected
but the communication hasn't yet been established between the
controller card (PXM) and Service Module.
"
::= { smRedMapEntry 4 }
redSecondarySlotNum OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the slot number of the redundant card for the
primary card. SecondarySlotNum will be 0 when no secondary
card covering the primary card. SecondarySlotNum in case
of MGX8850 shloud be from the same half of the shelf. Like
if primary card is in the top then secondary card also
should be in the top and will be covered by top SRM.
"
::= { smRedMapEntry 5 }
redSecondaryType OBJECT-TYPE
SYNTAX INTEGER {
other (1),
bsc (2),
aum-T3 (10),
tim (20),
frsm-4T1 (30),
frsm-4E1 (31),
frsm-hs1 (34),
frsm-8T1 (35),
frsm-8E1 (36),
frsm-hs1b (37),
ausm-4T1 (40),
ausm-4E1 (41),
ausm-8T1 (50),
ausm-8E1 (51),
ausmB-8T1 (52),
ausmB-8E1 (53),
cesm-4T1 (60),
cesm-4E1 (61),
imatm-T3T1 (70),
imatm-E3E1 (71),
imatmB-T1 (72),
imatmB-E1 (73),
frasm-8T1 (80),
cesm-8T1 (90),
cesm-8E1 (91),
-- SM from Netro
bscsm-2 (100),
bscsm-4 (101),
-- frsm_vhs cards
frsm-2ct3 (130),
frsm-2t3 (131),
frsm-2e3 (132),
frsm-hs2 (133),
frsm-2t3b (134),
frsm-2e3b (135),
frsm-hs2b-hssi (136),
frsm-hs2b-12In1 (137),
-- cesm-t3e3 cards
cesm-T3 (140),
cesm-E3 (141),
-- testers
atmt-8T1 (110),
atmt-8E1 (111),
frt-8T1 (120),
frt-8E1 (121),
-- VISM
vism-8T1 (150),
vism-8E1 (151),
-- reserved for MGX8850 after 1000
pxm1 (1000),
pxm1-2t3e3 (1001),
pxm1-4oc3 (1002),
pxm1-oc12 (1003),
rpm (2000),
rpm-pr (2001)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the type of the redundant card
Note that redSecondaryType is the same as redPrimaryType
unless it is changed for a new service module.
Some of the card types are not supported in the table but
they are defined here for consistency with the shelf card types.
"
::= { smRedMapEntry 6 }
redSecondaryState OBJECT-TYPE
SYNTAX INTEGER{
nocard (1),
standby (2),
active (3),
failed (4),
selfTest (5),
heldInReset (6),
boot (7),
mismatch (8),
unknown (9),
unusedCoreCardMisMatch (10),
blocked (11),
reserved (12),
-- Hold state applies to PXM during Graceful Upgrade.
unusedHold (13),
notResponding (14),
cardinit (17)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object holds the state of the secondary card
Supported values are :
nocard (1) : Module not present in the slot
standby (2) : Module is in 'standby' state
active (3) : Module is in 'active' state
failed (4) : Module is in 'failed' state due to some condition
selfTest(5) : Module is performing selftest
mismatch(8) : Module is not compatible with the current configuration
or a wrong type of back-card/line-module is plugged in.
notResponding(14) : Response from the Service module has become slow
probably due to overloading of CPU.
No recovery action is required on user part.
At present, this state is implemented only for RPM card.
cardinit(17) : When the physical presence of card has been detected
but the communication hasn't yet been established between the
controller card (PXM) and Service Module.
"
::= { smRedMapEntry 7 }
redType OBJECT-TYPE
SYNTAX INTEGER {
yCable (1),
oneToN (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object describes the type of redundancy.
The supported values are :
yCable (1) : 1:1 (y cable) redundancy configuration. In this
configuration,there is only one module which acts
as the backup for the other.
oneToN (2) : 1:N redundancy configuration. In this configuration,
there is one module(secondary)which acts as the
backup for other primary modules. There are multiple
primary modules and one secondary module in this
configuration. At any point of time, the secondary
module is backup for only one failed primary
module. If more than one primary module fails,
then the failed primary modules are not covered
by the secondary module.
"
::= { smRedMapEntry 8 }
redCoveringSlot OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is the slot number of the primary card for which
the secondary card is covering
Note that redCoveringSlot is set to 0 when the primary
is not being protected. If this primary card is being
protected by its redundant card then this object would
be the primary slot number.
"
::= { smRedMapEntry 9 }
redFeature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the feature of the primary card.
"
::= { smRedMapEntry 10 }
redLineModuleType OBJECT-TYPE
SYNTAX INTEGER
{
lm-DB15-4T1 (16),
lm-DB15-4E1 (17),
lm-BNC-4E1 (18),
lm-DB15-4T1-R(19),
lm-DB15-4E1-R(20),
lm-BNC-4E1-R (21),
lm-RJ48-8T1 (22),
lm-RJ48-8E1 (23),
lm-SMB-8E1 (24),
lm-RJ48-T3T1 (25),
lm-RJ48-E3E1 (26),
lm-RJ48-T3E1 (27),
lm-SMB-E3E1 (28),
lm-RJ48-E3T1 (29),
lm-SMB-T3E1 (30),
lm-T3E3-D (32),
lm-T3E3-B (33),
lm-RJ48-8T1-R(48),
lm-RJ48-8E1-R(49),
lm-SMB-8E1-R (50),
-- HSSI/X.21 Added by Suheel
lm-HS1-4X21 (60),
lm-HS1-3HSSI (61),
-- HSSI/X.21
lm-HS1-4V35 (62),
lm-12In1-8s (63)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the line module type for the primary card.
This object is NOT configurable and it only has the type
of the current line module that is present in this slot.
Note that the types that end with a -R are of redundant
back card type which do not have a connector on the
its faceplate and they are used for the redundant card
but they can be plugged into the primary by mistake and
this object would show its type.
"
::= { smRedMapEntry 11 }
END
Reference in New Issue View Git Blame Copy Permalink