snmp_mib_archive/snmp_mib_archive/qlogicmib2.cfg

#-MIBFILE: qlogicmib2.mib

QLOGIC-MIB DEFINITIONS ::= BEGIN


FcQlModuleIndex ::=
	OCTET STRING

FcQxPortIndex ::=
	OCTET STRING

qlogic OBJECT IDENTIFIER ::= { enterprises 1663 }

qLogicOidTree OBJECT IDENTIFIER ::= { qlogic 1 }

qLogicExperimental OBJECT IDENTIFIER ::= { qLogicOidTree 3 }

qLogicExperimentalBase OBJECT IDENTIFIER ::= { qLogicExperimental 0 }

qlSB2PortControl OBJECT IDENTIFIER ::= { qLogicExperimental 10 }

qlSB2PortStatus OBJECT IDENTIFIER ::= { qLogicExperimental 11 }

fcQxPortPhysTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FcQxPortPhysEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains, one entry for each QxPort in the
Fabric Element, physical level status and parameters of the
QxPorts."
	::= { qlSB2PortControl 1 }


fcQxPortPhysEntry OBJECT-TYPE
	SYNTAX FcQxPortPhysEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing physical level status and parameters of
a QxPort."
	INDEX { fcQlModuleIndex , fcQxPortIndex }

	::= { fcQxPortPhysTable 1 }

fcQxPortPhysEntry ::=
	SEQUENCE {
		fcQlModuleIndex FcQlModuleIndex,
		fcQxPortIndex FcQxPortIndex,
		fcQxPortPhysAdminStatus INTEGER,
		fcQxPortPhysOperStatus INTEGER
		}

fcQlModuleIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the module within the Fabric Element
for which this entry contains information. This value is
never greater than fcFeModuleCapacity."
	::= { fcQxPortPhysEntry 1 }


fcQxPortIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the QxPort within the module.  This
number ranges from 1 to the value of fcFeModulePortCapacity
for the associated module. The value remains constant for
the identified QxPort until the module is re-initialized."
	::= { fcQxPortPhysEntry 2 }


fcQxPortPhysAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	online(1),
	offline(2),
	testing(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired state of the QxPort.  A management station may
place the QxPort in a desired state by setting this object
accordingly.  The testing(3) state indicates that no
operational frames can be passed.  When a Fabric Element
initializes, all QxPorts start with fcQxPortPhysAdminStatus
in the offline(2) state.  As the result of either explicit
management action or per configuration information
accessible by the Fabric Element, fcQxPortPhysAdminStatus
is then changed to either the online(1) or testing(3)
states, or remains in the offline state."
	::= { fcQxPortPhysEntry 3 }


fcQxPortPhysOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	online(1),
	offline(2),
	testing(3),
	linkFailure(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational status of the QxPort.  The
testing(3) indicates that no operational frames can be
passed.  If fcQxPortPhysAdminStatus is offline(2) then
fcQxPortPhysOperStatus should be offline(2). If
fcQxPortPhysAdminStatus is changed to online(1) then
fcQxPortPhysOperStatus should change to online(1) if the
QxPort is ready to accept Fabric Login request from the
attached NxPort; it should proceed and remain in the link-
failure(4) state if and only if there is a fault that
prevents it from going to the online(1) state."
	::= { fcQxPortPhysEntry 4 }


fcQxPortStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FcQxPortStatusEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table that contains, one entry for each QxPort in the
Fabric Element, operational status and parameters of the
QxPorts."
	::= { qlSB2PortStatus 1 }


fcQxPortStatusEntry OBJECT-TYPE
	SYNTAX FcQxPortStatusEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry containing operational status and parameters of a
QxPort."
	INDEX { fcQlModuleIndex , fcQxPortIndex }

	::= { fcQxPortStatusTable 1 }

fcQxPortStatusEntry ::=
	SEQUENCE {
		fcQlModuleIndex FcQlModuleIndex,
		fcQxPortIndex FcQxPortIndex,
		fcQxPortOperMode INTEGER,
		fcQxPortAdminMode INTEGER
		}

fcQlModuleIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the module within the Fabric Element
for which this entry contains information. This value is
never greater than fcFeModuleCapacity."
	::= { fcQxPortStatusEntry 1 }


fcQxPortIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object identifies the QxPort within the module.  This
number ranges from 1 to the value of fcFeModulePortCapacity
for the associated module. The value remains constant for
the identified QxPort until the module is re-initialized."
	::= { fcQxPortStatusEntry 2 }


fcQxPortOperMode OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	ePort(2),
	fPort(3),
	flPort(4),
	gPort(5),
	glPort(6),
	donorPort(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational mode of the FxPort."
	::= { fcQxPortStatusEntry 3 }


fcQxPortAdminMode OBJECT-TYPE
	SYNTAX INTEGER {
	fPort(3),
	flPort(4),
	gPort(5),
	glPort(6),
	donorPort(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired operational mode of the FxPort."
	::= { fcQxPortStatusEntry 4 }


qlSB2PortLinkDown TRAP-TYPE
	ENTERPRISE qLogicExperimental
	VARIABLES { fcQxPortPhysAdminStatus, fcQxPortPhysOperStatus }
DESCRIPTION "A linkDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the fcQxPortPhysOperStatus
object for one of its communication links has left the online
state and transitioned to some other state.  The current state
is indicated by the included value of fcQxPortPhysOperStatus."
	::= 10


qlSB2PortLinkUp TRAP-TYPE
	ENTERPRISE qLogicExperimental
	VARIABLES { fcQxPortPhysAdminStatus, fcQxPortPhysOperStatus }
DESCRIPTION "A linkUp trap signifies that the SNMP entity, acting in
an agent role, has detected that the fcQxPortPhysOperStatus
object for one of its communication links has entered the online
state from some other state.  The current state is indicated by
the included value of fcQxPortPhysOperStatus."
	::= 11


END