mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-16 15:44:57 +00:00
475 lines
15 KiB
Plaintext
475 lines
15 KiB
Plaintext
CANOPY-SYS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress, Counter, Gauge, TimeTicks, NetworkAddress, enterprises
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString, PhysAddress
|
|
FROM SNMPv2-TC
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI;
|
|
|
|
-- Define the Motorola Canopy object identifier
|
|
motorola OBJECT IDENTIFIER ::= { enterprises 17713 }
|
|
|
|
-- Groups in motorola
|
|
p2p OBJECT IDENTIFIER ::= { motorola 1 }
|
|
p2mp OBJECT IDENTIFIER ::= { motorola 2 }
|
|
|
|
-- Groups in p2p
|
|
configuration OBJECT IDENTIFIER ::= { p2p 5 }
|
|
licence OBJECT IDENTIFIER ::= { p2p 8 }
|
|
mgmt OBJECT IDENTIFIER ::= { p2p 9 }
|
|
phyControl OBJECT IDENTIFIER ::= { p2p 10 }
|
|
phyStatus OBJECT IDENTIFIER ::= { p2p 12 }
|
|
reset OBJECT IDENTIFIER ::= { p2p 18 }
|
|
versions OBJECT IDENTIFIER ::= { p2p 19 }
|
|
pubStats OBJECT IDENTIFIER ::= { p2p 20 }
|
|
encryption OBJECT IDENTIFIER ::= { p2p 22 }
|
|
p2pTraps OBJECT IDENTIFIER ::= { p2p 99 }
|
|
|
|
-- Configuration group attribute definitions
|
|
--
|
|
iPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Internet protocol (IP) address. This address is used by
|
|
the family of Internet protocols to uniquely this
|
|
identify the unit on a network"
|
|
::= { configuration 1 }
|
|
|
|
subnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A subnet allows the flow of network traffic between
|
|
hosts to be segregated based on a network
|
|
configuration. By organizing hosts into
|
|
logical groups, subnetting can improve network
|
|
security and performance."
|
|
::= { configuration 2 }
|
|
|
|
gatewayIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of a computer on the current network that
|
|
is currently acting as a network gateway. A gateway
|
|
acts as an entrance / exit to packets from / to
|
|
other networks."
|
|
::= { configuration 3 }
|
|
|
|
targetMACAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC address of the PTP wireless unit forming the other
|
|
end of the PTP link"
|
|
::= { configuration 4 }
|
|
|
|
masterSlaveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
master(0),
|
|
slave(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The PTP wireless link operates using a master and slave
|
|
relationship."
|
|
::= { configuration 5 }
|
|
|
|
maximumTransmitPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-15..27)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum transmit power the wireless unit is permitted to
|
|
use when establishing and maintaining the wireless
|
|
link"
|
|
::= { configuration 6 }
|
|
|
|
-- Licence group attribute definitions
|
|
--
|
|
regionCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The region code prohibits the wireless unit from
|
|
operating outside the regulated limits"
|
|
::= { licence 1 }
|
|
|
|
productVariant OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
motorola-canopy-60mbps-backhaul(0),
|
|
motorola-canopy-60mbps-backhaul(1),
|
|
motorola-canopy-60mbps-backhaul(2),
|
|
motorola-canopy-30mbps-backhaul(3),
|
|
spare-1(4),
|
|
spare-2(5),
|
|
spare-3(6),
|
|
spare-4(7),
|
|
spare-5(8),
|
|
spare-6(9),
|
|
spare-7(10),
|
|
motorola-canopy-150mbps-backhaul(11),
|
|
motorola-canopy-300mbps-backhaul(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The product variant"
|
|
::= { licence 2 }
|
|
|
|
productName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the product variant"
|
|
::= { licence 3 }
|
|
|
|
ethernetFibreSupport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ethernet fibre support availability on this wireless
|
|
unit"
|
|
::= { licence 4 }
|
|
|
|
frequencyVariant OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
freq-5800-mhz(0),
|
|
freq-5400-mhz(1),
|
|
freq-4900-mhz(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frequency variant of the wireless unit"
|
|
::= { licence 5 }
|
|
|
|
-- Mgmt group attribute definitions
|
|
--
|
|
targetRange OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Initial target range used in installation +/-1,
|
|
expressed in tenths of a kilometer. When
|
|
Auto-Ranging this must be set to 0"
|
|
::= { mgmt 1 }
|
|
|
|
rangingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto-0-40-km(0),
|
|
auto-0-100-km(1),
|
|
auto-0-200-km(2),
|
|
target-range(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type of ranging to use during installation, either
|
|
Auto-Ranging or use a selectable Target
|
|
Range"
|
|
::= { mgmt 2 }
|
|
|
|
-- PhyControl group attribute definitions
|
|
--
|
|
asymmetricTDD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
symmetric-data-rate-1-to-1(0),
|
|
asymmetric-data-rate-2-to-1(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Control TDD Structure"
|
|
::= { phyControl 1 }
|
|
|
|
-- PhyStatus group attribute definitions
|
|
--
|
|
receivePower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Receive power expressed in tenths of a dBm"
|
|
::= { phyStatus 1 }
|
|
|
|
vectorError OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vector error measurement compares the received
|
|
signal's IQ modulation characteristics to an
|
|
ideal signal to determine the composite error
|
|
vector magnitude. The value represented by this
|
|
attribute is the average vector error over the
|
|
previous second expressed in tenths of a dB"
|
|
::= { phyStatus 2 }
|
|
|
|
transmitPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmit power expressed in tenths of a dBm"
|
|
::= { phyStatus 3 }
|
|
|
|
range OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Distance between the two peer wireless units expressed
|
|
in tenths of a kilometer"
|
|
::= { phyStatus 4 }
|
|
|
|
linkLoss OBJECT-TYPE
|
|
SYNTAX INTEGER (-500..500)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The wireless link loss expressed in tenths of a dB"
|
|
::= { phyStatus 5 }
|
|
|
|
receiveChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active receive channel"
|
|
::= { phyStatus 6 }
|
|
|
|
transmitChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active transmit channel"
|
|
::= { phyStatus 7 }
|
|
|
|
receiveModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mod-acquisition(0),
|
|
mod-bpsk-0-63(1),
|
|
mod-qpsk-0-63-single(2),
|
|
mod-transient-1(3),
|
|
mod-qpsk-0-87-single(4),
|
|
mod-transient-2(5),
|
|
mod-16qam-0-63-single-a(6),
|
|
mod-transient-3(7),
|
|
mod-16qam-0-87-single(8),
|
|
mod-transient-5(9),
|
|
mod-64qam-0-75-single(10),
|
|
mod-transient-5(11),
|
|
mod-64qam-0-92-single(12),
|
|
mod-transient-6(13),
|
|
mod-256qam-0-81-single(14),
|
|
mod-16qam-0-63-single-b(15),
|
|
mod-16qam-0-63-dual(16),
|
|
mod-transient-7(17),
|
|
mod-16qam-0-87-dual(18),
|
|
mod-transient-8(19),
|
|
mod-64qam-0-75-dual(20),
|
|
mod-transient-9(21),
|
|
mod-64qam-0-92-dual(22),
|
|
mod-transient-10(23),
|
|
mod-256qam-0-81-dual(24)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active receive modulation mode"
|
|
::= { phyStatus 8 }
|
|
|
|
transmitModulationMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mod-acquisition(0),
|
|
mod-bpsk-0-63(1),
|
|
mod-qpsk-0-63-single(2),
|
|
mod-transient-1(3),
|
|
mod-qpsk-0-87-single(4),
|
|
mod-transient-2(5),
|
|
mod-16qam-0-63-single-a(6),
|
|
mod-transient-3(7),
|
|
mod-16qam-0-87-single(8),
|
|
mod-transient-5(9),
|
|
mod-64qam-0-75-single(10),
|
|
mod-transient-5(11),
|
|
mod-64qam-0-92-single(12),
|
|
mod-transient-6(13),
|
|
mod-256qam-0-81-single(14),
|
|
mod-16qam-0-63-single-b(15),
|
|
mod-16qam-0-63-dual(16),
|
|
mod-transient-7(17),
|
|
mod-16qam-0-87-dual(18),
|
|
mod-transient-8(19),
|
|
mod-64qam-0-75-dual(20),
|
|
mod-transient-9(21),
|
|
mod-64qam-0-92-dual(22),
|
|
mod-transient-10(23),
|
|
mod-256qam-0-81-dual(24)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active transmit modulation mode"
|
|
::= { phyStatus 9 }
|
|
|
|
receiveFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5875)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current receive frequency expressed in MHz"
|
|
::= { phyStatus 11 }
|
|
|
|
transmitFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5875)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current transmit frequency expressed in MHz"
|
|
::= { phyStatus 12 }
|
|
|
|
signalStrengthRatio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Signal strength ratio (Vertical / Horizontal) expressed
|
|
in tenths of a dB"
|
|
::= { phyStatus 13 }
|
|
|
|
-- Reset group attribute definitions
|
|
--
|
|
systemReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(0),
|
|
console-reboot(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this attribute to '1' will cause a system
|
|
reboot"
|
|
::= { reset 1 }
|
|
|
|
-- Versions group attribute definitions
|
|
--
|
|
softwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current software version"
|
|
::= { versions 1 }
|
|
|
|
hardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Hardware platform version."
|
|
::= { versions 2 }
|
|
|
|
secondarySoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Secondary software version, used when the primary
|
|
software image is invalid or erased"
|
|
::= { versions 3 }
|
|
|
|
bootVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Boot code software version"
|
|
::= { versions 4 }
|
|
|
|
-- PubStats group attribute definitions
|
|
--
|
|
receiveDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Average data rate over the last one second interval
|
|
expressed in kbps"
|
|
::= { pubStats 1 }
|
|
|
|
transmitDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Average data rate over the last one second interval
|
|
expressed in kbps"
|
|
::= { pubStats 2 }
|
|
|
|
aggregateDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Average data rate over the last one second interval
|
|
(kbps)."
|
|
::= { pubStats 3 }
|
|
|
|
-- Encryption group attribute definitions
|
|
--
|
|
dEPRECATEDencryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Encryption Algorithm used by the wireless link. N.B.
|
|
The same Encryption Algorithm must be configured at
|
|
BOTH ends of the link for it to function correctly."
|
|
::= { encryption 1 }
|
|
|
|
encryptionAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
aes-rijndael(1),
|
|
aes-256-bit-rijndael(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Encryption Algorithm used by the wireless link. N.B.
|
|
The same Encryption Algorithm must be configured at
|
|
BOTH ends of the link for it to function correctly."
|
|
::= { encryption 1 }
|
|
|
|
-- Enterprise NOTIFICATION definitions
|
|
--
|
|
dfsChannelChangeTrap NOTIFICATION-TYPE
|
|
OBJECTS { receiveChannel }
|
|
STATUS current
|
|
DESCRIPTION "DFS channel change event"
|
|
::= { p2pTraps 1 }
|
|
|
|
dfsImpulsiveInterferenceDetectedTrap NOTIFICATION-TYPE
|
|
OBJECTS { receiveChannel }
|
|
STATUS current
|
|
DESCRIPTION "DFS impulsive interference detected event"
|
|
::= { p2pTraps 2 }
|
|
END
|