mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-16 07:34:58 +00:00
1180 lines
30 KiB
Plaintext
1180 lines
30 KiB
Plaintext
-- SECTION 1: Top Level Definitions
|
|
|
|
|
|
CENTILLION-ATMCFG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
-- Centillion ATM Configuration MIB Release 2.1.1
|
|
-- Revision 06/24/99
|
|
|
|
-- Copyright 1999 Nortel Networks, Inc.
|
|
-- All rights reserved.
|
|
-- This Bay Networks SNMP Management Information Base Specification
|
|
-- (Specification) embodies Bay Networks' confidential and
|
|
-- proprietary intellectual property. Bay Networks retains all
|
|
-- title and ownership in the Specification, including any
|
|
-- revisions.
|
|
|
|
-- This Specification is supplied "AS IS," and Bay Networks makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
|
|
-- Imports
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
atmConfig, EnableIndicator
|
|
FROM CENTILLION-ROOT-MIB
|
|
VirtualSegmentTypeId
|
|
FROM CENTILLION-VIRTUALSEGMENT-MIB;
|
|
|
|
|
|
-- Groups
|
|
|
|
atmElanConfig OBJECT IDENTIFIER ::= { atmConfig 1 }
|
|
atmCktTable OBJECT IDENTIFIER ::= { atmConfig 2 }
|
|
atmPortConfig OBJECT IDENTIFIER ::= { atmConfig 3 }
|
|
atmSysConfig OBJECT IDENTIFIER ::= { atmConfig 4 }
|
|
atmPortLogConfig OBJECT IDENTIFIER ::= { atmConfig 5 }
|
|
|
|
|
|
-- SECTION 2: Elan Configuration Group
|
|
|
|
-- This group contains information pertaining to ATM elan
|
|
-- configuration in the system
|
|
|
|
atmElanConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmElanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM elan table"
|
|
::= { atmElanConfig 1 }
|
|
|
|
atmElanConfigEntry OBJECT-TYPE
|
|
SYNTAX AtmElanConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM elan table.
|
|
Each entry is indexed by one field:
|
|
elan id."
|
|
INDEX { atmElanIndex }
|
|
::= { atmElanConfigTable 1 }
|
|
|
|
AtmElanConfigEntry ::= SEQUENCE {
|
|
atmElanIndex
|
|
INTEGER,
|
|
atmElanType
|
|
INTEGER,
|
|
atmElanEnable
|
|
INTEGER,
|
|
atmElanAllCkts
|
|
OCTET STRING,
|
|
atmElanVirtualCard
|
|
INTEGER,
|
|
atmElanVirtualPort
|
|
INTEGER,
|
|
atmElanVirtualSegmentId
|
|
INTEGER,
|
|
atmElanStatus
|
|
INTEGER,
|
|
atmElanVirtualSegmentType
|
|
VirtualSegmentTypeId,
|
|
atmElanBridgeGroupId
|
|
INTEGER,
|
|
atmElanMaxUnknownFrameCount
|
|
INTEGER,
|
|
atmElanMaxUnknownFrameTime
|
|
INTEGER,
|
|
atmElanVcBridgingEnable
|
|
EnableIndicator,
|
|
atmElanOneMModemEnable
|
|
EnableIndicator
|
|
}
|
|
|
|
atmElanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index to the atm elan table.
|
|
support total of 32 circuits."
|
|
::= { atmElanConfigEntry 1 }
|
|
|
|
atmElanType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
atmElanXob(1),
|
|
atmElanBe(2),
|
|
atmLecXob(3), -- ATM Forum Circuit Saver LEC
|
|
atmLecBe(4), -- ATM Forum Turbo LEC
|
|
atm1483Xob(5), -- RFC 1483 PVC Circuit Saver
|
|
atmNullXob(6) -- RFC 1483 NULL Encap PVC Circuit Saver
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The elan type."
|
|
::= { atmElanConfigEntry 2 }
|
|
|
|
atmElanEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable bit of the elan.
|
|
1 = enable elan
|
|
2 = disable elan"
|
|
::= { atmElanConfigEntry 3 }
|
|
|
|
atmElanAllCkts OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Return all pvc circuits that belong to this elan.
|
|
Each circuit id is a 32 bit field"
|
|
::= { atmElanConfigEntry 4}
|
|
|
|
atmElanVirtualCard OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Virtual card number."
|
|
::= { atmElanConfigEntry 5}
|
|
|
|
atmElanVirtualPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Virtual port number. Currently this number is the Elan id"
|
|
::= { atmElanConfigEntry 6}
|
|
|
|
atmElanVirtualSegmentId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Virtual Segment ID of the segment that this Elan is a member of"
|
|
::= { atmElanConfigEntry 7}
|
|
|
|
atmElanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
add(1),
|
|
delete(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the entry. Entries may be added by
|
|
specifying a value of valid, and removed by setting the status
|
|
to invalid."
|
|
::= { atmElanConfigEntry 8 }
|
|
|
|
atmElanVirtualSegmentType OBJECT-TYPE
|
|
SYNTAX VirtualSegmentTypeId
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The virtual segment type."
|
|
::= { atmElanConfigEntry 9 }
|
|
|
|
|
|
atmElanBridgeGroupId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Spanning Tree Group ID of the spanning tree group that the
|
|
virtual segment and this Elan are members of."
|
|
::= { atmElanConfigEntry 10}
|
|
|
|
|
|
atmElanMaxUnknownFrameCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum Unknown Frame Count. See the description of
|
|
atmElanMaxUnknownFrameTime below."
|
|
DEFVAL { 10 }
|
|
::= { atmElanConfigEntry 11 }
|
|
|
|
atmElanMaxUnknownFrameTime OBJECT-TYPE
|
|
SYNTAX INTEGER(1..60)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maxinum Unknown Frame Time. Within the period of time
|
|
defined by the Maxinum Unknown Frame Time, a LAN Client
|
|
will send no more than Maxinum Unknown Frame Count frames
|
|
for a given unicast LAN Destination.
|
|
This time value is expressed in seconds."
|
|
DEFVAL { 1 }
|
|
::= { atmElanConfigEntry 12 }
|
|
|
|
atmElanVcBridgingEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable VC Bridging on the vport.
|
|
The default value for this object is disable."
|
|
DEFVAL { disabled }
|
|
::= { atmElanConfigEntry 13 }
|
|
|
|
atmElanOneMModemEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Flag to indicate whether the vport supports one meg modem
|
|
feature. When this feature is enabled, data received from
|
|
all LAN ports in the same VLAN as the vport will be
|
|
forwarded only to the vport. "
|
|
DEFVAL { disabled }
|
|
::= { atmElanConfigEntry 14 }
|
|
|
|
-- SECTION 3: Circuit Table Group
|
|
|
|
-- This group contains information pertaining to ATM pktckt connections
|
|
-- in the system.
|
|
|
|
-- The ATM Packet Circuit Table.
|
|
|
|
atmPktCktTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmPktCktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM virtual circuit table."
|
|
::= { atmCktTable 1 }
|
|
|
|
atmPktCktEntry OBJECT-TYPE
|
|
SYNTAX AtmPktCktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM Packet Circuit table entry.
|
|
Each entry is indexed by one field:
|
|
The circuit index."
|
|
INDEX { atmPktCktIndex }
|
|
::= { atmPktCktTable 1 }
|
|
|
|
AtmPktCktEntry ::= SEQUENCE {
|
|
atmPktCktIndex
|
|
INTEGER,
|
|
atmPktCktPriority
|
|
INTEGER,
|
|
atmPktCktEnable
|
|
INTEGER,
|
|
atmPktCktType
|
|
INTEGER,
|
|
atmPktCktCost
|
|
INTEGER,
|
|
atmPktCktElanIndex
|
|
INTEGER,
|
|
atmPktCktCardPort
|
|
INTEGER,
|
|
atmPktCktVpi
|
|
INTEGER,
|
|
atmPktCktVci
|
|
INTEGER,
|
|
atmPktCktStatus
|
|
INTEGER,
|
|
atmPktCktCardPort2
|
|
INTEGER
|
|
}
|
|
|
|
atmPktCktIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index to the packet circuit table.
|
|
support total of 256 circuits."
|
|
::= { atmPktCktEntry 1 }
|
|
|
|
atmPktCktPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normalPriority(1),
|
|
highPriority(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Priority bit of the circuit.
|
|
1 = normal priority
|
|
2 = high priority"
|
|
::= { atmPktCktEntry 2 }
|
|
|
|
atmPktCktEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable bit of the circuit.
|
|
1 = enable circuit
|
|
2 = disable circuit"
|
|
::= { atmPktCktEntry 3 }
|
|
|
|
atmPktCktType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
virtualCkt(1),
|
|
virtualPathCkt(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"type bit of the circuit.
|
|
1 = virtual circuit
|
|
2 = virtual path circuit"
|
|
::= { atmPktCktEntry 4 }
|
|
|
|
atmPktCktCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cost of the circuit.
|
|
range from 0 to 255 with 0 the least cost."
|
|
::= { atmPktCktEntry 5 }
|
|
|
|
atmPktCktElanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The elan id this circuit belongs to."
|
|
::= { atmPktCktEntry 6 }
|
|
|
|
atmPktCktCardPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The atm card/port of the circuit. The card/port
|
|
takes one byte. This will be replaced by
|
|
atmPktCktCardPort2"
|
|
::= { atmPktCktEntry 7 }
|
|
|
|
atmPktCktVpi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The packet circuit vpi number."
|
|
::= { atmPktCktEntry 8 }
|
|
|
|
atmPktCktVci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The packet circuit vci number."
|
|
::= { atmPktCktEntry 9 }
|
|
|
|
atmPktCktStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
add(1),
|
|
delete(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the entry. Entries may be added by
|
|
specifying a value of valid, and removed by setting the status
|
|
to invalid."
|
|
::= { atmPktCktEntry 10 }
|
|
|
|
atmPktCktCardPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This mib is added for 24 ports card. This will replace
|
|
atmPktCktCardPort. The atm card/port of the circuit.
|
|
The card and port takes one byte each."
|
|
::= { atmPktCktEntry 11 }
|
|
|
|
-- The ATM Cell Circuit Table.
|
|
|
|
atmCellCktTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmCellCktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM virtual circuit table."
|
|
::= { atmCktTable 2 }
|
|
|
|
atmCellCktEntry OBJECT-TYPE
|
|
SYNTAX AtmCellCktEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM Cell Circuit table entry.
|
|
Each entry is indexed by one field:
|
|
The circuit index."
|
|
INDEX { atmCellCktIndex }
|
|
::= { atmCellCktTable 1 }
|
|
|
|
AtmCellCktEntry ::= SEQUENCE {
|
|
atmCellCktIndex
|
|
INTEGER,
|
|
atmCellCktPriority
|
|
INTEGER,
|
|
atmCellCktEnable
|
|
INTEGER,
|
|
atmCellCktType
|
|
INTEGER,
|
|
atmCellCktNumEndpt
|
|
INTEGER,
|
|
atmCellCktEndptList
|
|
OCTET STRING,
|
|
atmCellCktStatus
|
|
INTEGER
|
|
}
|
|
|
|
atmCellCktIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index to the packet circuit table.
|
|
support total of 256 circuits."
|
|
::= { atmCellCktEntry 1 }
|
|
|
|
atmCellCktPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normPriority(1),
|
|
highPriority(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Priority bit of the circuit.
|
|
1 = normal priority
|
|
2 = high priority"
|
|
::= { atmCellCktEntry 2 }
|
|
|
|
atmCellCktEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable bit of the cell circuit.
|
|
1 = enable cell circuit
|
|
2 = disable cell circuit"
|
|
::= { atmCellCktEntry 3 }
|
|
|
|
atmCellCktType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
virtualCkt(1),
|
|
virtualPathCkt(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"type bit of the circuit.
|
|
1 = virtual circuit
|
|
2 = virtual path circuit"
|
|
::= { atmCellCktEntry 4 }
|
|
|
|
atmCellCktNumEndpt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of endpoints in the circuit.
|
|
An endpoint is defined as a combination of
|
|
card/port/vpi/vci."
|
|
::= { atmCellCktEntry 5 }
|
|
|
|
atmCellCktEndptList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of endpoints for the circuit.
|
|
Each endpoint includes
|
|
Card (32 bit)
|
|
Port (32 bit)
|
|
Vpi (32 bit)
|
|
Vci (32 bit)"
|
|
::= { atmCellCktEntry 6 }
|
|
|
|
atmCellCktStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
add(1),
|
|
delete(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the entry. Entries may be added by
|
|
specifying a value of valid, and removed by setting the status
|
|
to invalid."
|
|
::= { atmCellCktEntry 7 }
|
|
|
|
|
|
-- SECTION 4: Port Table Configuration Group
|
|
|
|
-- This group contains information pertaining to ATM port
|
|
-- configuration in the system
|
|
|
|
-- The ATM Port Table
|
|
|
|
atmPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM Hardware Port Configuration Table"
|
|
::= { atmPortConfig 1 }
|
|
|
|
atmPortConfigEntry OBJECT-TYPE
|
|
SYNTAX AtmPortConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM port configuration table.
|
|
Each entry is indexed by two fields:
|
|
The card index and the port index."
|
|
INDEX {atmPortCardIndex, atmPortPortIndex }
|
|
::= { atmPortConfigTable 1 }
|
|
|
|
AtmPortConfigEntry ::= SEQUENCE {
|
|
atmPortCardIndex
|
|
INTEGER,
|
|
atmPortPortIndex
|
|
INTEGER,
|
|
atmPortEnable
|
|
INTEGER,
|
|
atmPortLoopTimingEnable
|
|
INTEGER,
|
|
atmPortHecCosetEnable
|
|
INTEGER,
|
|
atmPortHecCorrectionEnable
|
|
INTEGER,
|
|
atmPortHardwareFrameMode
|
|
INTEGER,
|
|
atmPortLocalLoopEnable
|
|
INTEGER,
|
|
atmPortRemoteLoopEnable
|
|
INTEGER,
|
|
atmPortForceHecErrorEnable
|
|
INTEGER,
|
|
atmPortScramblingEnable
|
|
INTEGER,
|
|
atmPortSigEntityType
|
|
INTEGER,
|
|
atmPortSigEntityRole
|
|
INTEGER,
|
|
atmPortSigVersion
|
|
INTEGER,
|
|
atmPortSigIlmi
|
|
INTEGER,
|
|
atmPortAdminFrameMode
|
|
INTEGER,
|
|
atmPortSscopStatus
|
|
INTEGER,
|
|
atmPortStatusEnquiryEnable
|
|
EnableIndicator,
|
|
atmPortTimerT309
|
|
INTEGER,
|
|
atmPortTrafficShapingEnable
|
|
INTEGER
|
|
}
|
|
|
|
atmPortCardIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates the ATM card id."
|
|
::= { atmPortConfigEntry 1 }
|
|
|
|
atmPortPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates ATM port id."
|
|
::= { atmPortConfigEntry 2 }
|
|
|
|
atmPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if the ATM port is enabled or disabled.
|
|
2=Disable, 1=Enable. When the port is disabled, no cell
|
|
traffic will be ggenerated nor accepted and not SONET signal
|
|
is generated.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 3 }
|
|
|
|
atmPortLoopTimingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if loop timing is enabled or disabled.
|
|
2=Disable, 1=Enable.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 4 }
|
|
|
|
atmPortHecCosetEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if heccoset is enabled or disabled.
|
|
2=Disable, 1=Enable. When the port is disabled, no cell
|
|
traffic will be ggenerated nor accepted and not SONET signal
|
|
is generated.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 5 }
|
|
|
|
atmPortHecCorrectionEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if hec correction is enabled or disabled.
|
|
2=Disable, 1=Enable.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 6 }
|
|
|
|
atmPortHardwareFrameMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2),
|
|
notapply(3),
|
|
other(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates the atm frame mode detected by hardware,
|
|
Sonet, SDH or NotApply (no cable plugged in) or
|
|
other (value other than sonet and sdh)."
|
|
::= { atmPortConfigEntry 7 }
|
|
|
|
atmPortLocalLoopEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if local loop is enabled or disabled.
|
|
2=Disable, 1=Enable.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 8 }
|
|
|
|
atmPortRemoteLoopEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if loop timing is enabled or disabled.
|
|
2=Disable, 1=Enable. When the port is disabled, no cell
|
|
traffic will be ggenerated nor accepted and not SONET signal
|
|
is generated.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 9 }
|
|
|
|
atmPortForceHecErrorEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if forcing cell header checksum error
|
|
is enabled or disabled.
|
|
2=Disable, 1=Enable.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 10 }
|
|
|
|
atmPortScramblingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates if scrambing is enabled or disabled.
|
|
2=Disable, 1=Enable.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 11 }
|
|
|
|
atmPortSigEntityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noSig(1), -- no signalling
|
|
uni(2), -- UNI
|
|
iisp(3) -- NNI
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the type of the siganlling entity
|
|
that is associated with this ATM port. The type of
|
|
a signalling instance can either be no signalling,
|
|
UNI which is the User-Network Interface, or Network-
|
|
Network Interface iisp(3). Note that there are more
|
|
than one NNI supported by the ATM Forum and we support
|
|
only IISP.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 12 }
|
|
|
|
atmPortSigEntityRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- unspecified
|
|
user(2), -- User side of UNI
|
|
netw(3) -- Network side of UNI
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the role of the signalling entity
|
|
that is associated with this ATM port. When
|
|
the object atmPortSigEntity is set to a value other
|
|
than uni(2), this object is set to other(1).
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 13 }
|
|
|
|
atmPortSigVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- unspecified
|
|
auto(2), -- learn it thru ILMI
|
|
uni30(3), -- UNI 3.0
|
|
uni31(4) -- UNI 3.1
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the version of the siganlling entity
|
|
that is associated with this ATM port. This object is
|
|
always set to other(1) when the object atmPortSigEntityType
|
|
is set to a value other than uni(2). When the value of
|
|
this object is set to auto(2), the signalling entity will
|
|
start running with UNI 3.1 and learn the correct version
|
|
through ILMI.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 14 }
|
|
|
|
atmPortSigIlmi OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1), -- ILMI enabled
|
|
disabled(2) -- ILMI disabled
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable/disable ILMI.
|
|
Exception: this field is read-only for 5782 Goldfish
|
|
Module. That is, the user is not allowed to configure
|
|
the port on this module."
|
|
::= { atmPortConfigEntry 15 }
|
|
|
|
atmPortAdminFrameMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2),
|
|
invalid(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When read, this object returns the configured atm
|
|
frame mode. When set, only modes sonet and sdh
|
|
are supported."
|
|
::= { atmPortConfigEntry 16 }
|
|
|
|
atmPortSscopStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operational status of the
|
|
service specific connection-oriented protocol
|
|
( SSCOP ). SSCOP's function is to correct
|
|
transmission errors or losses by selectively
|
|
retransmitting the missing frames.
|
|
|
|
down - Indicates that the peer protocol has
|
|
failed to respond to the max number
|
|
of status polls by its peer.
|
|
|
|
up - Indicates the peer protocol is responding
|
|
to the status polls.
|
|
|
|
other - is an undetermined state of the SSCOP
|
|
peer protocol."
|
|
::= {atmPortConfigEntry 17 }
|
|
|
|
atmPortStatusEnquiryEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the Status
|
|
enquiry for this logical link. The default value for
|
|
this object is enabled except for the UNI links.
|
|
Note that this parameter is used only if the ATM
|
|
signalling is enabled."
|
|
DEFVAL { disabled }
|
|
::= { atmPortConfigEntry 18 }
|
|
|
|
atmPortTimerT309 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Timer value of timer T309.T309 is a SAAL disconnect timer.
|
|
The T309 timer is started when SAAL disconnect is sent
|
|
and it is stopped when SAAL disconnect is sent. When the
|
|
timer is expired internal connection will be cleared and
|
|
virtual calls will be released."
|
|
DEFVAL { 10 }
|
|
::= { atmPortConfigEntry 19 }
|
|
|
|
atmPortTrafficShapingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field indicates if traffic shaping for the ATM
|
|
port is enabled or disabled. When traffic shaping is
|
|
disabled, the port operates at full wire rate.
|
|
When traffic shaping is enabled, the port will operate
|
|
at the configured rate or available pacing rate."
|
|
DEFVAL { disable }
|
|
::= { atmPortConfigEntry 20 }
|
|
|
|
-- SECTION 5: System Configuration Group
|
|
|
|
atmSysSigEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the ATM signalling
|
|
task within the switch. Note that by disabling the ATM
|
|
signalling, the switch will not be able to support any ATM
|
|
applications such as the LAN Emulation Client. The default
|
|
of this value is disable."
|
|
::= { atmSysConfig 1 }
|
|
|
|
|
|
|
|
|
|
-- SECTION 6: Logical Link Table Configuration Group
|
|
|
|
-- This group contains information pertaining to ATM logical
|
|
-- link configuration in the system
|
|
|
|
-- The ATM Logical Link Table
|
|
|
|
atmMaxPortLogConfig OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of logical links
|
|
in the atmPortLogConfigTable."
|
|
::= { atmPortLogConfig 1 }
|
|
|
|
atmCurPortLogConfig OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current number of logical links
|
|
in the atmPortLogConfigTable."
|
|
::= { atmPortLogConfig 2 }
|
|
|
|
|
|
atmPortLogConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmPortLogConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM Logical link Configuration Table."
|
|
::= { atmPortLogConfig 3 }
|
|
|
|
atmPortLogConfigEntry OBJECT-TYPE
|
|
SYNTAX AtmPortLogConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ATM logical link configuration table.
|
|
Each entry is indexed by three fields:
|
|
The card index, port index and the VPI."
|
|
|
|
INDEX {atmPortLogConfigCardIndex,
|
|
atmPortLogConfigPortIndex,
|
|
atmPortLogConfigVPI }
|
|
::= { atmPortLogConfigTable 1 }
|
|
|
|
AtmPortLogConfigEntry ::= SEQUENCE {
|
|
atmPortLogConfigCardIndex
|
|
INTEGER,
|
|
atmPortLogConfigPortIndex
|
|
INTEGER,
|
|
atmPortLogConfigVPI
|
|
INTEGER,
|
|
atmPortLogConfigStatus
|
|
INTEGER,
|
|
atmPortLogConfigSigEntityType
|
|
INTEGER,
|
|
atmPortLogConfigSigEntityRole
|
|
INTEGER,
|
|
atmPortLogConfigSigVersion
|
|
INTEGER,
|
|
atmPortLogConfigSigIlmi
|
|
INTEGER,
|
|
atmPortLogConfigAdmWeightCbr
|
|
INTEGER,
|
|
atmPortLogConfigAdmWeightUbr
|
|
INTEGER,
|
|
atmPortLogConfigStatusEnquiryEnable
|
|
EnableIndicator,
|
|
atmPortLogConfigTimerT309
|
|
INTEGER
|
|
}
|
|
|
|
atmPortLogConfigCardIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates the ATM card id."
|
|
::= { atmPortLogConfigEntry 1 }
|
|
|
|
atmPortLogConfigPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..24)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates ATM port id."
|
|
::= { atmPortLogConfigEntry 2 }
|
|
|
|
atmPortLogConfigVPI OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates ATM virtual path identifier."
|
|
::= { atmPortLogConfigEntry 3 }
|
|
|
|
atmPortLogConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
up(2),
|
|
add(3),
|
|
modify(4),
|
|
remove(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to add, modify or delete a logical
|
|
link. A value of other(1) will be returned for read
|
|
operations on logical links.
|
|
|
|
The value add(3) is written when setting up a new link
|
|
and modify(4) is used for modifying an existing link.
|
|
The value remove(5) is used to release the link."
|
|
::= { atmPortLogConfigEntry 4 }
|
|
|
|
atmPortLogConfigSigEntityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noSig(1), -- no signaling
|
|
uni(2), -- UNI
|
|
iisp(3), -- IISP
|
|
pnni(4) -- PNNI
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the type of the signaling entity
|
|
associated with this ATM port. The type of a signaling
|
|
can either be no signaling, User-Network Interface,
|
|
uni(2), Interim Interswitch Signaling Protocol,
|
|
iisp(3) or Private Network-Network Interface, pnni(4)."
|
|
::= { atmPortLogConfigEntry 5 }
|
|
|
|
atmPortLogConfigSigEntityRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- unspecified
|
|
user(2), -- User side of UNI
|
|
netw(3) -- Network side of UNI
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the role of the signaling entity
|
|
that is associated with this ATM logical port. This
|
|
object can only be set to user(2) or netw(3).
|
|
|
|
A value of other(1) is returned when neither user(2)
|
|
or netw(3) has been specified."
|
|
::= { atmPortLogConfigEntry 6 }
|
|
|
|
atmPortLogConfigSigVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- unspecified
|
|
auto(2), -- learn it thru ILMI
|
|
uni30(3), -- UNI 3.0
|
|
uni31(4), -- UNI 3.1
|
|
pnni10(5) -- PNNI 1.0
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the version of the signaling entity
|
|
that is associated with this ATM port.
|
|
|
|
When atmPortLogConfigSigEntityType is set to pnni(4), the
|
|
signaling entity cannot be set to uni30(3) or uni31(4);
|
|
It can be set to pnni10(5) or auto(2).
|
|
|
|
When this object is set to auto(2), the signaling entity will
|
|
start running with UNI 3.1 and learn the correct version
|
|
through ILMI."
|
|
::= { atmPortLogConfigEntry 7 }
|
|
|
|
atmPortLogConfigSigIlmi OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1), -- ILMI enabled
|
|
disabled(2) -- ILMI disabled
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable ILMI.
|
|
|
|
When atmPortLogConfigSigEntityType is set to uni(2) and
|
|
atmPortLogConfigSigVersion is set to auto(2), this
|
|
object must be set to enabled(1).
|
|
|
|
When atmPortLogConfigSigEntityType is set to iisp(3), this
|
|
object must be set to disabled(2)."
|
|
::= { atmPortLogConfigEntry 8 }
|
|
|
|
atmPortLogConfigAdmWeightCbr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Administrative weight of this VP for
|
|
the constant bit rate service category. A value
|
|
of zero is returned if the link is non-PNNI."
|
|
DEFVAL { 5040 }
|
|
::= { atmPortLogConfigEntry 9 }
|
|
|
|
atmPortLogConfigAdmWeightUbr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Administrative weight of this VP for
|
|
the unspecified bit rate service category.
|
|
A value of zero is returned if the link is
|
|
non-PNNI."
|
|
DEFVAL { 5040 }
|
|
::= { atmPortLogConfigEntry 10 }
|
|
|
|
atmPortLogConfigStatusEnquiryEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the Status
|
|
enquiry. Note that this parametwer is used only
|
|
if the ATM signalling is enabled."
|
|
DEFVAL { disabled }
|
|
::= { atmPortLogConfigEntry 11 }
|
|
|
|
atmPortLogConfigTimerT309 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Timer value of timer T309.T309 is a SAAL disconnect timer.
|
|
The T309 timer is started when SAAL disconnect is sent
|
|
and it is stopped when SAAL disconnect is sent. When the
|
|
timer is expired internal connection will be cleared and
|
|
virtual calls will be released."
|
|
DEFVAL { 10 }
|
|
::= { atmPortLogConfigEntry 12 }
|
|
|
|
END
|
|
|