MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-16 07:34:58 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/snmp_mib_archive/SYMBOL-CC-WS2000-MIB-2.0.mib

21001 lines
562 KiB
Plaintext
Raw Blame History

--
-- SYMBOL-CC-WS2000-MIB-2.0.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
-- Monday, December 14, 2009 at 14:43:17
--
-- MIB version = 08b35
--
-- Notes for WS2000 MIB:
--
-- === v2.0, (MIB='08b'):
--
-- (no notes at this time).
--
-- === v1.5, (MIB='08a'):
--
-- One 'incompatible' change was made: all MIB groups were
-- moved from their v1.0 locations to a new group called
-- 'ccGroupsV1dot0' under 'ccGroups'. Since the switch does
-- not actually implement such groups, no NMS should be able
-- to detect this change, and so while technically an
-- 'incompatible' change, it should not matter to anyone.
--
-- Value 'ccLoadFtpPassword' has been obsoleted; use the new
-- value 'ccLoadFtpPasswordNoRead' which is the same, except
-- that GETs return a 0-length string. Had to remove the old
-- value from the ccAdminGroup, since all items in a group
-- must be of the same type, (in this case 'current').
--
-- Note that OIDs declared in this MIB, (except for values
-- under group 'sysoids'), are reserved for future expansion.
-- They may be redefined in the future without causing an
-- 'incompatible' change.
--
-- === v1.0, (MIB='07a'):
--
-- (no notes at this time).
--
--
--
--
--
SYMBOL-CC-WS2000-MIB DEFINITIONS ::= BEGIN
IMPORTS
ifDescr
FROM IF-MIB
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
enterprises, TimeTicks, IpAddress, Integer32, Unsigned32,
Counter32, Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY,
OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, TruthValue, TestAndIncr, PhysAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.388.11.2.1
moduleid MODULE-IDENTITY
LAST-UPDATED "200912141441Z" -- December 14, 2009 at 14:41 GMT
ORGANIZATION
"Symbol WSD (Wireless Infrastructure Division, San Jose)"
CONTACT-INFO
"Carl Mower
cmower@symbol.com"
DESCRIPTION
" "
REVISION "200912141442Z" -- December 14, 2009 at 14:42 GMT
DESCRIPTION
"Added sftpFirmwareServerToSwitch enum to support SFTP."
REVISION "200412101649Z" -- December 10, 2004 at 16:49 GMT
DESCRIPTION
"09a00: Initial clean-up for WS2000 v2.0 release."
REVISION "200410281632Z" -- October 28, 2004 at 16:32 GMT
DESCRIPTION
"08a43: Final clean-up for WS2000 v1.5 release candidate:
Adopted new mib versioning scheme. Details can be found
in the description of ccIdMibVersion.
"
REVISION "200409081207Z" -- September 08, 2004 at 12:07 GMT
DESCRIPTION
"8a: Final clean-up for WS2000 v1.5 beta release:
Added RF utilization, efficiency & health and system stats
at the Mu, Portal, Wlan and Switch level.
Enabled config files up/down via TFTP
Added 4 static and 4 stats traps"
REVISION "200402041532Z" -- February 04, 2004 at 15:32 GMT
DESCRIPTION
"7a: Final clean-up for WS2000 v1.0 release:
Removed -07A from MIB name, (can't chg after MIB locked).
Rename ccPortalType to ccPortalRadioType.
New RadioType; used in ccPortalRadioType & ccMuRadioType.
Moved ccAp: Name, Location, & LastReset to ccPortal_.
Delete ccAssociation: LastUnAssociate, CountUnAssociates.
Change ccMuSymbolRogueApEna from int to TruthValue.
Change ccPortalLastReason & ccMuLastReason: int to enum.
Some items OIDs changed.
Locked MIB after these chgs; (no prior diffs possible);
all chgs after this shall be backward compatible.
"
REVISION "200401060000Z" -- January 06, 2004 at 00:00 GMT
DESCRIPTION
"6a: Change a few items from RW to RO.
Added ranges to all RW values.
Added descriptions to all items.
Some items OIDs changed.
"
REVISION "200312110100Z" -- December 11, 2003 at 01:00 GMT
DESCRIPTION
"5a: First release of WS2000 MIB (aside from development team).
"
REVISION "200312110000Z" -- December 11, 2003 at 00:00 GMT
DESCRIPTION
"4a: Forth preliminary draft of WS2000 MIB.
"
REVISION "200312020000Z" -- December 02, 2003 at 00:00 GMT
DESCRIPTION
"3a: Third preliminary draft of WS2000 MIB.
"
REVISION "200311260000Z" -- November 26, 2003 at 00:00 GMT
DESCRIPTION
"2a: Second preliminary draft of WS2000 MIB.
"
REVISION "200311250000Z" -- November 25, 2003 at 00:00 GMT
DESCRIPTION
"1a: First preliminary draft of WS2000 MIB.
MIB naming include 2-digits & 1-letter;
digits increase for substantive chgs;
letter chgs for non-substantive chgs:
-- chgs to comments
-- chgs to descriptions
-- any other chg that person with
MIB browser could not detect.
"
::= { ws2k 1 }
--
-- Type definitions
--
--
--
SinglePointer ::= INTEGER (0..255)
MultiPointer63 ::= BITS
{
null(0),
referToEntry001(1),
referToEntry002(2),
referToEntry003(3),
referToEntry004(4),
referToEntry005(5),
referToEntry006(6),
referToEntry007(7),
referToEntry008(8),
referToEntry009(9),
referToEntry010(10),
referToEntry011(11),
referToEntry012(12),
referToEntry013(13),
referToEntry014(14),
referToEntry015(15),
referToEntry016(16),
referToEntry017(17),
referToEntry018(18),
referToEntry019(19),
referToEntry020(20),
referToEntry021(21),
referToEntry022(22),
referToEntry023(23),
referToEntry024(24),
referToEntry025(25),
referToEntry026(26),
referToEntry027(27),
referToEntry028(28),
referToEntry029(29),
referToEntry030(30),
referToEntry031(31),
referToEntry032(32),
referToEntry033(33),
referToEntry034(34),
referToEntry035(35),
referToEntry036(36),
referToEntry037(37),
referToEntry038(38),
referToEntry039(39),
referToEntry040(40),
referToEntry041(41),
referToEntry042(42),
referToEntry043(43),
referToEntry044(44),
referToEntry045(45),
referToEntry046(46),
referToEntry047(47),
referToEntry048(48),
referToEntry049(49),
referToEntry050(50),
referToEntry051(51),
referToEntry052(52),
referToEntry053(53),
referToEntry054(54),
referToEntry055(55),
referToEntry056(56),
referToEntry057(57),
referToEntry058(58),
referToEntry059(59),
referToEntry060(60),
referToEntry061(61),
referToEntry062(62),
referToEntry063(63)
}
MultiPointer255 ::= BITS
{
null(0),
referToEntry001(1),
referToEntry002(2),
referToEntry003(3),
referToEntry004(4),
referToEntry005(5),
referToEntry006(6),
referToEntry007(7),
referToEntry008(8),
referToEntry009(9),
referToEntry010(10),
referToEntry011(11),
referToEntry012(12),
referToEntry013(13),
referToEntry014(14),
referToEntry015(15),
referToEntry016(16),
referToEntry017(17),
referToEntry018(18),
referToEntry019(19),
referToEntry020(20),
referToEntry021(21),
referToEntry022(22),
referToEntry023(23),
referToEntry024(24),
referToEntry025(25),
referToEntry026(26),
referToEntry027(27),
referToEntry028(28),
referToEntry029(29),
referToEntry030(30),
referToEntry031(31),
referToEntry032(32),
referToEntry033(33),
referToEntry034(34),
referToEntry035(35),
referToEntry036(36),
referToEntry037(37),
referToEntry038(38),
referToEntry039(39),
referToEntry040(40),
referToEntry041(41),
referToEntry042(42),
referToEntry043(43),
referToEntry044(44),
referToEntry045(45),
referToEntry046(46),
referToEntry047(47),
referToEntry048(48),
referToEntry049(49),
referToEntry050(50),
referToEntry051(51),
referToEntry052(52),
referToEntry053(53),
referToEntry054(54),
referToEntry055(55),
referToEntry056(56),
referToEntry057(57),
referToEntry058(58),
referToEntry059(59),
referToEntry060(60),
referToEntry061(61),
referToEntry062(62),
referToEntry063(63),
referToEntry064(64),
referToEntry065(65),
referToEntry066(66),
referToEntry067(67),
referToEntry068(68),
referToEntry069(69),
referToEntry070(70),
referToEntry071(71),
referToEntry072(72),
referToEntry073(73),
referToEntry074(74),
referToEntry075(75),
referToEntry076(76),
referToEntry077(77),
referToEntry078(78),
referToEntry079(79),
referToEntry080(80),
referToEntry081(81),
referToEntry082(82),
referToEntry083(83),
referToEntry084(84),
referToEntry085(85),
referToEntry086(86),
referToEntry087(87),
referToEntry088(88),
referToEntry089(89),
referToEntry090(90),
referToEntry091(91),
referToEntry092(92),
referToEntry093(93),
referToEntry094(94),
referToEntry095(95),
referToEntry096(96),
referToEntry097(97),
referToEntry098(98),
referToEntry099(99),
referToEntry100(100),
referToEntry101(101),
referToEntry102(102),
referToEntry103(103),
referToEntry104(104),
referToEntry105(105),
referToEntry106(106),
referToEntry107(107),
referToEntry108(108),
referToEntry109(109),
referToEntry110(110),
referToEntry111(111),
referToEntry112(112),
referToEntry113(113),
referToEntry114(114),
referToEntry115(115),
referToEntry116(116),
referToEntry117(117),
referToEntry118(118),
referToEntry119(119),
referToEntry120(120),
referToEntry121(121),
referToEntry122(122),
referToEntry123(123),
referToEntry124(124),
referToEntry125(125),
referToEntry126(126),
referToEntry127(127),
referToEntry128(128),
referToEntry129(129),
referToEntry130(130),
referToEntry131(131),
referToEntry132(132),
referToEntry133(133),
referToEntry134(134),
referToEntry135(135),
referToEntry136(136),
referToEntry137(137),
referToEntry138(138),
referToEntry139(139),
referToEntry140(140),
referToEntry141(141),
referToEntry142(142),
referToEntry143(143),
referToEntry144(144),
referToEntry145(145),
referToEntry146(146),
referToEntry147(147),
referToEntry148(148),
referToEntry149(149),
referToEntry150(150),
referToEntry151(151),
referToEntry152(152),
referToEntry153(153),
referToEntry154(154),
referToEntry155(155),
referToEntry156(156),
referToEntry157(157),
referToEntry158(158),
referToEntry159(159),
referToEntry160(160),
referToEntry161(161),
referToEntry162(162),
referToEntry163(163),
referToEntry164(164),
referToEntry165(165),
referToEntry166(166),
referToEntry167(167),
referToEntry168(168),
referToEntry169(169),
referToEntry170(170),
referToEntry171(171),
referToEntry172(172),
referToEntry173(173),
referToEntry174(174),
referToEntry175(175),
referToEntry176(176),
referToEntry177(177),
referToEntry178(178),
referToEntry179(179),
referToEntry180(180),
referToEntry181(181),
referToEntry182(182),
referToEntry183(183),
referToEntry184(184),
referToEntry185(185),
referToEntry186(186),
referToEntry187(187),
referToEntry188(188),
referToEntry189(189),
referToEntry190(190),
referToEntry191(191),
referToEntry192(192),
referToEntry193(193),
referToEntry194(194),
referToEntry195(195),
referToEntry196(196),
referToEntry197(197),
referToEntry198(198),
referToEntry199(199),
referToEntry200(200),
referToEntry201(201),
referToEntry202(202),
referToEntry203(203),
referToEntry204(204),
referToEntry205(205),
referToEntry206(206),
referToEntry207(207),
referToEntry208(208),
referToEntry209(209),
referToEntry210(210),
referToEntry211(211),
referToEntry212(212),
referToEntry213(213),
referToEntry214(214),
referToEntry215(215),
referToEntry216(216),
referToEntry217(217),
referToEntry218(218),
referToEntry219(219),
referToEntry220(220),
referToEntry221(221),
referToEntry222(222),
referToEntry223(223),
referToEntry224(224),
referToEntry225(225),
referToEntry226(226),
referToEntry227(227),
referToEntry228(228),
referToEntry229(229),
referToEntry230(230),
referToEntry231(231),
referToEntry232(232),
referToEntry233(233),
referToEntry234(234),
referToEntry235(235),
referToEntry236(236),
referToEntry237(237),
referToEntry238(238),
referToEntry239(239),
referToEntry240(240),
referToEntry241(241),
referToEntry242(242),
referToEntry243(243),
referToEntry244(244),
referToEntry245(245),
referToEntry246(246),
referToEntry247(247),
referToEntry248(248),
referToEntry249(249),
referToEntry250(250),
referToEntry251(251),
referToEntry252(252),
referToEntry253(253),
referToEntry254(254),
referToEntry255(255)
}
-- This datatype always means that the MIB variable is
-- a simple ENUM that when written to 'doActionRightNow',
-- causes the described action to take place, (much like
-- a button pressed in a UI).
--
-- Such a value does NOT remain in state 'doActionRightNow'
-- while the operation is in-process, but instead when read
-- always returns 'idleState'.
DoActionNow ::= INTEGER
{
doActionRightNow(1),
idleState(2)
}
RadioType ::= INTEGER
{
radio802dot11A(1),
radio802dot11B(2),
radio802dot11G(3),
radio802dot11FH(4),
radio802dot11AN(5),
radio802dot11BGN(6)
}
-- Values of this type are passwords. They can be written,
-- but when read, they return a 0-length string.
Password ::= OCTET STRING (SIZE (0..255))
-- In order to make the switch's implementation of
-- numerous tables simpler, tables using this datatype
-- have a fixed number of entries with fixed indices.
-- In such tables, no entries may be added or deleted,
-- but the pre-existing rows can be enabled or disabled
-- using the value declared with this datatype.
StaticRowEnable ::= INTEGER
{
enable(1),
disable(2)
}
PartsPer10k ::= Unsigned32 (0..10000)
-- This datatype is used for all percentage values that have
-- interesting tenths and hundreths, (such as 1.37%). SNMP
-- cannot report decimals, only whole numbers. Values of
-- this datatype are expressed not as parts-per-100, (percent),
-- but as parts-per-10000.
--
-- Said another way, values of this type are percent
-- multiplied by 100.
--
-- For example, 1.37% would be reported as 137.
--
ScaleBy100 ::= Unsigned32
-- This datatype is used for all values that have interesting
-- tenths and hundreths, (such as 2.48). SNMP cannot report
-- decimals, only whole numbers. Values of this datatype are
-- scaled (muliplied) by 100.
--
-- For example, 2.48 would be reported as 248.
-- In order to make the switch's implementation of some
-- dynamic tables simpler, tables using this datatype
-- use an abbreviated form of RowStatus.
--
-- Only CreateAndGo and Destroy states are supported.
--
-- On row creation, a single SET-PDU must contain all
-- the required values, including this value set to
-- createAndGo. (This greatly simplifies row validation
-- for the switch).
--
-- Setting this value to Destroy causes the corresponding
-- row to be deleted.
--
AbbrevRowStatus ::= INTEGER
{
createAndGo(4),
destroy(6)
}
-- This datatype always means that the MIB variable is
-- a simple ENUM that when written to 'doActionRightNow',
-- causes the described action to take place, (much like
-- a button pressed in a UI).
--
-- Such a value DOES remain in state 'doActionRightNow'
-- while the operation is in-process; when the operation is
-- completed, it will then return the value 'idleState'.
DoActionShowProgress ::= INTEGER
{
doActionRightNow(1),
idleState(2)
}
-- Values of this type are keys, expressed in hexadecimal as
-- a sequence of characters '0'..'9' plus 'A'..'F'.
--
-- Unless otherwise noted, the default value for variables of
-- this type is all-0s.
--
-- Values of this type are passwords. They can be written,
-- but when read, they return a 0-length string.
HexPassword ::= OCTET STRING (SIZE (0..255))
TransmitRate ::= BITS
{
null(0),
rate1Mb(1),
rate2Mb(2),
rate5pt5Mb(3),
rate6Mb(4),
rate9Mb(5),
rate11Mb(6),
rate12Mb(7),
rate18Mb(8),
rate22Mb(9),
rate24Mb(10),
rate36Mb(11),
rate48Mb(12),
rate54Mb(13)
}
--
-- Textual conventions
--
RowStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of [2].)
The status column has six defined values:
- `active', which indicates that the conceptual row is
available for use by the managed device;
- `notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- `notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- `createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- `createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- `destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except `notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: `notReady', `notInService' or
`active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value `active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value `notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value `notReady').
NOTE WELL
This textual convention may be used for a MIB table,
irrespective of whether the values of that table's
conceptual rows are able to be modified while it is
active, or whether its conceptual rows must be taken
out of service in order to be modified. That is, it is
the responsibility of the DESCRIPTION clause of the
status column to specify whether the status column must
not be `active' in order for the value of some other
column of the same conceptual row to be modified. If
such a specification is made, affected columns may be
changed by an SNMP set PDU if the RowStatus would not
be equal to `active' either immediately before or after
processing the PDU. In other words, if the PDU also
contained a varbind that would change the RowStatus
value, the column in question may be changed if the
RowStatus was not equal to `active' as the PDU was
received, or if the varbind sets the status to a value
other than 'active'.
Also note that whenever any elements of a row exist, the
RowStatus column must also exist.
To summarize the effect of having a conceptual row with a
status column having a SYNTAX clause value of RowStatus,
consider the following state diagram:
STATE
+--------------+-----------+-------------+-------------
| A | B | C | D
| |status col.|status column|
|status column | is | is |status column
ACTION |does not exist| notReady | notInService| is active
--------------+--------------+-----------+-------------+-------------
set status |noError ->D|inconsist- |inconsistent-|inconsistent-
column to | or | entValue| Value| Value
createAndGo |inconsistent- | | |
| Value| | |
--------------+--------------+-----------+-------------+-------------
set status |noError see 1|inconsist- |inconsistent-|inconsistent-
column to | or | entValue| Value| Value
createAndWait |wrongValue | | |
--------------+--------------+-----------+-------------+-------------
set status |inconsistent- |inconsist- |noError |noError
column to | Value| entValue| |
active | | | |
| | or | |
| | | |
| |see 2 ->D| ->D| ->D
--------------+--------------+-----------+-------------+-------------
set status |inconsistent- |inconsist- |noError |noError ->C
column to | Value| entValue| |
notInService | | | |
| | or | | or
| | | |
| |see 3 ->C| ->C|wrongValue
--------------+--------------+-----------+-------------+-------------
set status |noError |noError |noError |noError
column to | | | |
destroy | ->A| ->A| ->A| ->A
--------------+--------------+-----------+-------------+-------------
set any other |see 4 |noError |noError |see 5
column to some| | | |
value | | see 1| ->C| ->D
--------------+--------------+-----------+-------------+-------------
(1) goto B or C, depending on information available to the
agent.
(2) if other variable bindings included in the same PDU,
provide values for all columns which are missing but
required, then return noError and goto D.
(3) if other variable bindings included in the same PDU,
provide values for all columns which are missing but
required, then return noError and goto C.
(4) at the discretion of the agent, the return value may be
either:
inconsistentName: because the agent does not choose to
create such an instance when the corresponding
RowStatus instance does not exist, or
inconsistentValue: if the supplied value is
inconsistent with the state of some other MIB object's
value, or
noError: because the agent chooses to create the
instance.
If noError is returned, then the instance of the status
column must also be created, and the new state is B or C,
depending on the information available to the agent. If
inconsistentName or inconsistentValue is returned, the row
remains in state A.
(5) depending on the MIB definition for the column/table,
either noError or inconsistentValue may be returned.
NOTE: Other processing of the set request may result in a
response other than noError being returned, e.g.,
wrongValue, noCreation, etc.
Conceptual Row Creation
There are four potential interactions when creating a
conceptual row: selecting an instance-identifier which is
not in use; creating the conceptual row; initializing any
objects for which the agent does not supply a default; and,
making the conceptual row available for use by the managed
device.
Interaction 1: Selecting an Instance-Identifier
The algorithm used to select an instance-identifier varies
for each conceptual row. In some cases, the instance-
identifier is semantically significant, e.g., the
destination address of a route, and a management station
selects the instance-identifier according to the semantics.
In other cases, the instance-identifier is used solely to
distinguish conceptual rows, and a management station
without specific knowledge of the conceptual row might
examine the instances present in order to determine an
unused instance-identifier. (This approach may be used, but
it is often highly sub-optimal; however, it is also a
questionable practice for a naive management station to
attempt conceptual row creation.)
Alternately, the MIB module which defines the conceptual row
might provide one or more objects which provide assistance
in determining an unused instance-identifier. For example,
if the conceptual row is indexed by an integer-value, then
an object having an integer-valued SYNTAX clause might be
defined for such a purpose, allowing a management station to
issue a management protocol retrieval operation. In order
to avoid unnecessary collisions between competing management
stations, `adjacent' retrievals of this object should be
different.
Finally, the management station could select a pseudo-random
number to use as the index. In the event that this index
was already in use and an inconsistentValue was returned in
response to the management protocol set operation, the
management station should simply select a new pseudo-random
number and retry the operation.
A MIB designer should choose between the two latter
algorithms based on the size of the table (and therefore the
efficiency of each algorithm). For tables in which a large
number of entries are expected, it is recommended that a MIB
object be defined that returns an acceptable index for
creation. For tables with small numbers of entries, it is
recommended that the latter pseudo-random index mechanism be
used.
Interaction 2: Creating the Conceptual Row
Once an unused instance-identifier has been selected, the
management station determines if it wishes to create and
activate the conceptual row in one transaction or in a
negotiated set of interactions.
Interaction 2a: Creating and Activating the Conceptual Row
The management station must first determine the column
requirements, i.e., it must determine those columns for
which it must or must not provide values. Depending on the
complexity of the table and the management station's
knowledge of the agent's capabilities, this determination
can be made locally by the management station. Alternately,
the management station issues a management protocol get
operation to examine all columns in the conceptual row that
it wishes to create. In response, for each column, there
are three possible outcomes:
- a value is returned, indicating that some other
management station has already created this conceptual
row. We return to interaction 1.
- the exception `noSuchInstance' is returned,
indicating that the agent implements the object-type
associated with this column, and that this column in at
least one conceptual row would be accessible in the MIB
view used by the retrieval were it to exist. For those
columns to which the agent provides read-create access,
the `noSuchInstance' exception tells the management
station that it should supply a value for this column
when the conceptual row is to be created.
- the exception `noSuchObject' is returned, indicating
that the agent does not implement the object-type
associated with this column or that there is no
conceptual row for which this column would be
accessible in the MIB view used by the retrieval. As
such, the management station can not issue any
management protocol set operations to create an
instance of this column.
Once the column requirements have been determined, a
management protocol set operation is accordingly issued.
This operation also sets the new instance of the status
column to `createAndGo'.
When the agent processes the set operation, it verifies that
it has sufficient information to make the conceptual row
available for use by the managed device. The information
available to the agent is provided by two sources: the
management protocol set operation which creates the
conceptual row, and, implementation-specific defaults
supplied by the agent (note that an agent must provide
implementation-specific defaults for at least those objects
which it implements as read-only). If there is sufficient
information available, then the conceptual row is created, a
`noError' response is returned, the status column is set to
`active', and no further interactions are necessary (i.e.,
interactions 3 and 4 are skipped). If there is insufficient
information, then the conceptual row is not created, and the
set operation fails with an error of `inconsistentValue'.
On this error, the management station can issue a management
protocol retrieval operation to determine if this was
because it failed to specify a value for a required column,
or, because the selected instance of the status column
already existed. In the latter case, we return to
interaction 1. In the former case, the management station
can re-issue the set operation with the additional
information, or begin interaction 2 again using
`createAndWait' in order to negotiate creation of the
conceptual row.
NOTE WELL
Regardless of the method used to determine the column
requirements, it is possible that the management
station might deem a column necessary when, in fact,
the agent will not allow that particular columnar
instance to be created or written. In this case, the
management protocol set operation will fail with an
error such as `noCreation' or `notWritable'. In this
case, the management station decides whether it needs
to be able to set a value for that particular columnar
instance. If not, the management station re-issues the
management protocol set operation, but without setting
a value for that particular columnar instance;
otherwise, the management station aborts the row
creation algorithm.
Interaction 2b: Negotiating the Creation of the Conceptual
Row
The management station issues a management protocol set
operation which sets the desired instance of the status
column to `createAndWait'. If the agent is unwilling to
process a request of this sort, the set operation fails with
an error of `wrongValue'. (As a consequence, such an agent
must be prepared to accept a single management protocol set
operation, i.e., interaction 2a above, containing all of the
columns indicated by its column requirements.) Otherwise,
the conceptual row is created, a `noError' response is
returned, and the status column is immediately set to either
`notInService' or `notReady', depending on whether it has
sufficient information to make the conceptual row available
for use by the managed device. If there is sufficient
information available, then the status column is set to
`notInService'; otherwise, if there is insufficient
information, then the status column is set to `notReady'.
Regardless, we proceed to interaction 3.
Interaction 3: Initializing non-defaulted Objects
The management station must now determine the column
requirements. It issues a management protocol get operation
to examine all columns in the created conceptual row. In
the response, for each column, there are three possible
outcomes:
- a value is returned, indicating that the agent
implements the object-type associated with this column
and had sufficient information to provide a value. For
those columns to which the agent provides read-create
access (and for which the agent allows their values to
be changed after their creation), a value return tells
the management station that it may issue additional
management protocol set operations, if it desires, in
order to change the value associated with this column.
- the exception `noSuchInstance' is returned,
indicating that the agent implements the object-type
associated with this column, and that this column in at
least one conceptual row would be accessible in the MIB
view used by the retrieval were it to exist. However,
the agent does not have sufficient information to
provide a value, and until a value is provided, the
conceptual row may not be made available for use by the
managed device. For those columns to which the agent
provides read-create access, the `noSuchInstance'
exception tells the management station that it must
issue additional management protocol set operations, in
order to provide a value associated with this column.
- the exception `noSuchObject' is returned, indicating
that the agent does not implement the object-type
associated with this column or that there is no
conceptual row for which this column would be
accessible in the MIB view used by the retrieval. As
such, the management station can not issue any
management protocol set operations to create an
instance of this column.
If the value associated with the status column is
`notReady', then the management station must first deal with
all `noSuchInstance' columns, if any. Having done so, the
value of the status column becomes `notInService', and we
proceed to interaction 4.
Interaction 4: Making the Conceptual Row Available
Once the management station is satisfied with the values
associated with the columns of the conceptual row, it issues
a management protocol set operation to set the status column
to `active'. If the agent has sufficient information to
make the conceptual row available for use by the managed
device, the management protocol set operation succeeds (a
`noError' response is returned). Otherwise, the management
protocol set operation fails with an error of
`inconsistentValue'.
NOTE WELL
A conceptual row having a status column with value
`notInService' or `notReady' is unavailable to the
managed device. As such, it is possible for the
managed device to create its own instances during the
time between the management protocol set operation
which sets the status column to `createAndWait' and the
management protocol set operation which sets the status
column to `active'. In this case, when the management
protocol set operation is issued to set the status
column to `active', the values held in the agent
supersede those used by the managed device.
If the management station is prevented from setting the
status column to `active' (e.g., due to management station
or network failure) the conceptual row will be left in the
`notInService' or `notReady' state, consuming resources
indefinitely. The agent must detect conceptual rows that
have been in either state for an abnormally long period of
time and remove them. It is the responsibility of the
DESCRIPTION clause of the status column to indicate what an
abnormally long period of time would be. This period of
time should be long enough to allow for human response time
(including `think time') between the creation of the
conceptual row and the setting of the status to `active'.
In the absense of such information in the DESCRIPTION
clause, it is suggested that this period be approximately 5
minutes in length. This removal action applies not only to
newly-created rows, but also to previously active rows which
are set to, and left in, the notInService state for a
prolonged period exceeding that which is considered normal
for such a conceptual row.
Conceptual Row Suspension
When a conceptual row is `active', the management station
may issue a management protocol set operation which sets the
instance of the status column to `notInService'. If the
agent is unwilling to do so, the set operation fails with an
error of `wrongValue'. Otherwise, the conceptual row is
taken out of service, and a `noError' response is returned.
It is the responsibility of the DESCRIPTION clause of the
status column to indicate under what circumstances the
status column should be taken out of service (e.g., in order
for the value of some other column of the same conceptual
row to be modified).
Conceptual Row Deletion
For deletion of conceptual rows, a management protocol set
operation is issued which sets the instance of the status
column to `destroy'. This request may be made regardless of
the current value of the status column (e.g., it is possible
to delete conceptual rows which are either `notReady',
`notInService' or `active'.) If the operation succeeds,
then all instances associated with the conceptual row are
immediately removed."
SYNTAX INTEGER
{
active(1),
notInService(2),
notReady(3),
createAndGo(4),
createAndWait(5),
destroy(6)
}
DateAndTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
SYNTAX OCTET STRING (SIZE (0..255))
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.388
symbol OBJECT IDENTIFIER ::= { enterprises 388 }
-- !!- OID: .11 - as specified by Symbol MIB Admin.
--
-- This sub-tree used for MIBs and sysOIDs produced
-- by WSD, (Wireless Infrastructure Division,
-- San Jose).
--
-- 1.3.6.1.4.1.388.11
wsd OBJECT IDENTIFIER ::= { symbol 11 }
-- This node reserved for sysOIDs of devices produced
-- by WSD.
--
-- 1.3.6.1.4.1.388.11.1
sysoids OBJECT IDENTIFIER ::= { wsd 1 }
-- 1.3.6.1.4.1.388.11.1.1
ws2000 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"WS2000 with 1 WAN port, 6 LAN ports."
::= { sysoids 1 }
-- MIBs implemented by WS2000 devices.
--
-- All counter variables, under this tree node wrap in no less
-- than 5.8 minutes, EXCEPT as noted below. (Be advised that
-- all values referred to here as 'counters' are not
-- necessarily of type Counter32 or Counter64; some are
-- Unsigned32, and some Signal & Noise values are Integer32).
--
-- Exception #1: for all values that count the number
-- of tx/rx/both octets when the MAX number of Portals (12)
-- are all running at a full 54Mb. In such cases, those
-- counters could theoretically wrap in 0.8min. But, since
-- 54Mb does not practically achieve 54Mb, this wrap time
-- is more realistically at least 1-2min. If the switch does
-- not have all 12 Portals, that wrap time would be even
-- longer.
--
-- Exception #2: there are three _SignalSum values, (Portal,
-- MU, and WLAN); since Signal values range up to around
-- -90dBm, they could theoretically wrap in 0.5min if the MAX
-- number of Portals all had a full 54Mb of short packets
-- flowing, all with _Signal values of around -100. Since you
-- generally cannot communicate at 54Mb at -100dBm, this is
-- not practially realistic. At more realistic levels, these
-- values would wrap no faster than 1-2min, and verly likely
-- no faster than 5min.
--
-- (It was considered to increase the affected counters to
-- 64bits, but given the difficulty implementing larger
-- counters and the large number of values to change, as
-- weighed against the REALISTIC wrap risk did not suggest
-- doing this work).
--
-- Given all this, a poll time of 5min, (or less), will
-- basically ensure that no data is lost due to counter wrap.
--
--
--
-- Numerous tables include _SumSquares values. These MIB
-- variables are always the summation of the square of each
-- individual value. These _SumSquares values can be used,
-- (in conjunction with 'N' and _Sum), to calculate standard
-- deviation, (a statistical measure of the variance of the
-- data points).
-- 1.3.6.1.4.1.388.11.2
ws2k OBJECT IDENTIFIER ::= { wsd 2 }
-- Miscelaneous administrative functions.
-- 1.3.6.1.4.1.388.11.2.2
ccAdmin OBJECT IDENTIFIER ::= { ws2k 2 }
-- Information about the switch not otherwise
-- provided in MIB-2.
-- 1.3.6.1.4.1.388.11.2.2.1
ccInfo OBJECT IDENTIFIER ::= { ccAdmin 1 }
-- 1.3.6.1.4.1.388.11.2.2.1.1
ccInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the switch. This value is
unique for each instance of the WS2000 switch."
::= { ccInfo 1 }
-- 1.3.6.1.4.1.388.11.2.2.1.2
ccInfoCountrySelection OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is a two-character representation of the country
code.
Note: when changing this _CountrySelection, the current
channel and power levels are NOT changed. The prior
settings for these values may or may not be valid/legal
for the new country selected. It is up to the network
management software to ensure that channel and/or power
settings are changed BEFORE changing the country selection
so that no such invalid/illegal state is reached, even for
a short interim.
country code:
Argentina: ar
Australia: au
Austria: at
Bahrain: bh
Belarus: by
Belgium: be
Botswana: bw
Brazil: br
Bulgaria: bg
Canada: ca
Chile: cl
China: cn
Colombia: co
Costa Rica: cr
Croatia: hr
Czech Republic: cz
Denmark: dk
Ecuador: ec
Egypt: eg
Estonia: ee
Finland: fi
France: fr
Germany: de
Greece: gr
Hong Kong: hk
Hungary: hu
Iceland: is
India: in
Indonesia: id
Ireland: ie
Israel: il
Italy: it
Japan: jp
Jordan: jo
Kazakhstan: kz
Kuwait: kw
Latvia: lv
Liechtenstein: li
Lithuania: lt
Luxembourg: lu
Malaysia: my
Mexico: mx
Morocco: ma
Namibia: na
Netherlands: nl
New Zealand: nz
Norway: no
Oman: om
Peru: pe
Philippines: ph
Poland: pl
Portugal: pt
Qatar: qa
Romania: ro
Russia: ru
Saudi Arabia: sa
Singapore: sg
Slovak Republic: sk
Slovenia: si
South Africa: za
South Korea: kr
Spain: es
Sri Lanka: lk
Sweden: se
Switzerland: ch
Taiwan: tw
Thailand: th
Turkey: tr
Ukraine: ua
United Arab Emirates: ae
United Kingdom: gb
United States: us
Uruguay: uy
Venezuela: ve
Vietnam: vn
"
::= { ccInfo 2 }
-- This group contains MIB variables that identify the versions
-- of various components of the switch.
--
-- sysDescr is ALSO overloaded for this purpose. The 'terms'
-- reported in sysDescr occur in the same order as the MIB
-- values in this group.
--
-- (Separate MIB scalars report each term separately to make
-- it easy for SNMP scripts to find the given information. The
-- infomation is also retained in an overloaded sysDescr since
-- many NMS platforms show this one value prominently).
--
-- In sysDescr, each term is marked with a 'label':
-- 'HW=', 'FW=', 'SW=', 'MIB=', 'CLI=', 'XML='.
-- Each label in sysDescr is followed, (without a space), by
-- a sub-string (which itself contains no spaces), that
-- describes the version of that entity. Each term, (except
-- the last), is followed by a ',' and a space before the next
-- term.
--
-- If a device does not have a particular item, (for
-- example no XML interface), that term and its lablel
-- will be entirely missing from sysDescr, and the
-- corresponding MIB scalar will be either a zero-length
-- string, or will return a NO-SUCH.
--
-- The MIB version substring is a two-digit number (with a
-- leading zero if needed), followed by a lower-case letter.
-- The letter is increased if only comments or descriptions
-- are changed. If any other change is made, the number
-- increases.
--
-- The CLI version substring is a three-digit number, (with
-- leading zeros if needed). There is no letter. Any change
-- in CLI commands, parameters, or outputs results in this
-- value incrementing.
--
-- The XML version substring has the same format as the MIB
-- version sub-string.
--
-- SerialNumber is included here for convenience; it is not
-- displayed in sysDescr.
-- 1.3.6.1.4.1.388.11.2.2.1.3
ccIdentfication OBJECT IDENTIFIER ::= { ccInfo 3 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.1
ccIdHwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The same text that follows 'HW=' in sysDescr, EXCLUDING the
'HW='."
::= { ccIdentfication 1 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.2
ccIdFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The same text that follows 'FW=' in sysDescr, EXCLUDING the
'FW='. (The bootcode version)."
::= { ccIdentfication 2 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.3
ccIdSwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The same text that follows 'SW=' in sysDescr, EXCLUDING the
'SW='."
::= { ccIdentfication 3 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.4
ccIdMibVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The same text that follows 'MIB=' in sysDescr, EXCLUDING the
'MIB='.
The MIB version is identified by a two-digit major version
number (with a leading zero if needed), followed by a
lower-case letter minor version and 0 or more character info
number.
The major MIB version is changed whenever it becomes
incompatible to its previous version; i.e., some variables
have been deleted or the behavior/meaning has been changed.
Minor version number is changed when new features have been
added, but existing behavior is completely unchanged.
"
::= { ccIdentfication 4 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.5
ccIdCliVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The same text that follows 'CLI=' in sysDescr, EXCLUDING the
'CLI='."
::= { ccIdentfication 5 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.6
ccIdXmlVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of XML template implemented on this switch. (Much
like MIB version - read details there)."
::= { ccIdentfication 6 }
-- 1.3.6.1.4.1.388.11.2.2.1.3.7
ccIdSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the switch. This value is unique for each
instance of a given switch type."
::= { ccIdentfication 7 }
-- 1.3.6.1.4.1.388.11.2.2.1.4
ccDnsRelayMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable DNS Relay Mode"
::= { ccInfo 4 }
-- 1.3.6.1.4.1.388.11.2.2.1.5
ccSslv2Mode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SSLv2 Mode"
::= { ccInfo 5 }
-- 1.3.6.1.4.1.388.11.2.2.1.6
ccSshv1Mode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SShv2 Mode"
::= { ccInfo 6 }
-- 1.3.6.1.4.1.388.11.2.2.1.7
ccWeakCipherSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Weak Cipher Support"
::= { ccInfo 7 }
-- Values that can be used to reset portions of the
-- switch.
--
-- Reading any of the items in this group will always
-- return a value of 'false'.
-- 1.3.6.1.4.1.388.11.2.2.2
ccReset OBJECT IDENTIFIER ::= { ccAdmin 2 }
-- 1.3.6.1.4.1.388.11.2.2.2.1
ccResetFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing this value causes the switch to reset to
factory conditions. NOTHING is retained, NOT the
static IP address assignments (if any), NOR any
non-factory-default SNMP settings, nor any other
non-factory-default settings.
Given this, be warned that setting this value may
very well cause all communication paths to the
WS2000 to be lost. (However, if DHCP is used to
obtain an IP addr on the WAN port, and only
default SNMP settings are used, communications may
be possible after the factory reset)."
::= { ccReset 1 }
-- 1.3.6.1.4.1.388.11.2.2.2.2
ccResetSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing this value causes the switch to reset in
the same fashion as a common, (non-factory) reset."
::= { ccReset 2 }
-- 1.3.6.1.4.1.388.11.2.2.2.3
ccResetMuCounters OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Writing this value resets all counters in the
ccRf > ccMus sub-tree.
Obsolete in WS2000 v1.5"
::= { ccReset 3 }
-- 1.3.6.1.4.1.388.11.2.2.2.4
ccResetFactoryExceptIpSnmp OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Performs a factory reset, EXCEPT that Wan IP and SNMP access settings
are retained across the reset. Specifically:
Wan Ip + related settings
Pppoe settings
WS2000 wan access SNMP setting
SNMP v1/v2/v3 access settings
"
::= { ccReset 4 }
-- 1.3.6.1.4.1.388.11.2.2.2.5
ccResetStatCounters OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing this value resets all counters in the
ccRf sub-tree except for the ccPortalSystemStatsTable and
ccPortalTable
"
::= { ccReset 5 }
-- Values used to initiate, (via TFTP or FTP), a
-- firmware update of the switch remotely via SNMP.
--
-- All items in this group persist across reboots,
-- except: _FwOperation and _FwStart.
-- 1.3.6.1.4.1.388.11.2.2.3
ccLoadFw OBJECT IDENTIFIER ::= { ccAdmin 3 }
-- 1.3.6.1.4.1.388.11.2.2.3.1
ccLoadFwOperation OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(1),
ftpFirmwareServerToSwitch(2),
tftpFirmwareServerToSwitch(3),
cfFirmwareToSwitch(4),
sftpFirmwareServerToSwitch(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if the firmware is to be loaded to the
switch via FTP/SFTP or TFTP or CF Card."
::= { ccLoadFw 1 }
-- 1.3.6.1.4.1.388.11.2.2.3.2
ccLoadFwInterface OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(1),
wan(2),
subnet1(11),
subnet2(12),
subnet3(13),
subnet4(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface to use in contacting the FTP or TFTP
server. This is required since the actual firmware
load is accomplished via boot code that does not
contain routing logic."
::= { ccLoadFw 2 }
-- 1.3.6.1.4.1.388.11.2.2.3.3
ccLoadFwServerPath OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path to the firmware on the TFTP/FTP server.
Remember that the type of separator varies
depending on the operating system of the server.
For Windows, use '\', for Unix use '/'.
No path need be specified, (in which case the
default directory for the TFTP/FTP server will be
used); if a path is specified, remember to
terminate it with a trailing '/' or '\'."
::= { ccLoadFw 3 }
-- 1.3.6.1.4.1.388.11.2.2.3.4
ccLoadFwServerFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name, (on the server), of the firmware file
to load.
If operation is set to cfFirmwareToSwitch, this
variable is the file name on the compact flash card."
::= { ccLoadFw 4 }
-- 1.3.6.1.4.1.388.11.2.2.3.5
ccLoadFwStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this value to start the firmware load
operation.
Note that the actual TFTP/FTP does not begin
immediately, as first the 'operational' firmware
shuts-down, and returns to low-level boot code,
which actually starts the transfer."
::= { ccLoadFw 5 }
-- 1.3.6.1.4.1.388.11.2.2.3.6
ccLoadFwResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value reflects the result of the most-recent
firmware load since reboot, (if any)."
::= { ccLoadFw 6 }
-- 1.3.6.1.4.1.388.11.2.2.3.7
ccLoadFwSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success/failure status of the most recent
firmware load."
::= { ccLoadFw 7 }
-- Values used to initiate (via FTP only), a
-- download of a configuration file to the switch,
-- or an upload of a configuration file from the
-- switch.
--
-- All items in this group persist across reboots,
-- except: _CfgOperation and _CfgStart.
-- 1.3.6.1.4.1.388.11.2.2.4
ccLoadCfg OBJECT IDENTIFIER ::= { ccAdmin 4 }
-- 1.3.6.1.4.1.388.11.2.2.4.1
ccLoadCfgOperation OBJECT-TYPE
SYNTAX INTEGER
{
unspecified(1),
ftpConfigServerToSwitch(2),
ftpConfigSwitchToServer(3),
tftpConfigServerToSwitch(4),
tftpConfigSwitchToServer(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type and direction of the transfer to
perform involving the configuration file."
::= { ccLoadCfg 1 }
-- 1.3.6.1.4.1.388.11.2.2.4.2
ccLoadCfgServerPath OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path to the firmware on the TFTP/FTP server.
Remember that the type of separator varies
depending on the operating system of the server.
For Windows, use '\', for Unix use '/'.
No path need be specified, (in which case the
default directory for the TFTP/FTP server will be
used); if a path is specified, remember to
terminate it with a trailing '/' or '\'."
::= { ccLoadCfg 2 }
-- 1.3.6.1.4.1.388.11.2.2.4.3
ccLoadCfgServerFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name, (on the server), of the configuration
file to load/store from/to the server."
::= { ccLoadCfg 3 }
-- 1.3.6.1.4.1.388.11.2.2.4.4
ccLoadCfgStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this value to start the configuration file
operation.
Note that unlike a firmware load, the actual FTP/TFTP
transfer does begin virtually immediately."
::= { ccLoadCfg 4 }
-- 1.3.6.1.4.1.388.11.2.2.4.5
ccLoadCfgOperationsDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value counts the total number of configuration
file transfers completed, (whether they succeed or
fail).
The SNMP manager should save the value of this
counter just before starting a LoadCfg operation,
and then wait for this value to increment before
checking the Result and/or Success values."
::= { ccLoadCfg 5 }
-- 1.3.6.1.4.1.388.11.2.2.4.6
ccLoadCfgResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value reflects the result of the most-recent
configuration file load/store."
::= { ccLoadCfg 6 }
-- 1.3.6.1.4.1.388.11.2.2.4.7
ccLoadCfgSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success/failure status of the most recent
configuration file load/store."
::= { ccLoadCfg 7 }
-- Values that indicate if the configuration of the
-- switch has changed.
-- 1.3.6.1.4.1.388.11.2.2.5
ccCfgHist OBJECT IDENTIFIER ::= { ccAdmin 5 }
-- 1.3.6.1.4.1.388.11.2.2.5.1
ccCfgHistChangeCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value will increment by 1 or more for each
config change. It persists across reboots.
This variable can only be SET with the same value
that it currently contains. Any other value will
cause a SET-FAILED.
Note that this is NOT a TEST-AND-INCREMENT
semaphore, as this value does not immediately
increment after a config change, but only after
a short, though non-zero, delay. Because of this
non-zero delay, it is not suitable as a semaphore.
Note also that this value counts the number of
times that Flash memory has been written, which
may be greater than the number of config changes."
::= { ccCfgHist 1 }
-- 1.3.6.1.4.1.388.11.2.2.5.2
ccCfgHistChangeTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of sysUpTime as of the last config
change."
::= { ccCfgHist 2 }
-- 1.3.6.1.4.1.388.11.2.2.5.3
ccCfgHistSemaphore OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Can be used to solve the multiple-manager problem.
Before performing any SETs, the manager reads this
value. As a VAR-BIND of the only/last SET PDU,
this value is written with that value read. If
some other manager had made changes, this value
would have incremented, and the SET to it will
fail.
Note that this only guards against other managers
that use this semaphore. Changes made without
using this value will NOT be protected against.
For this reason, it is suggested that
ccCfgHistChangeCount also be SET - though that is
not a perfectly fail-safe semaphore, it will in
most cases protect even against this latter case."
::= { ccCfgHist 3 }
-- This group contains items that are common between
-- ccLoadFw and ccLoadCfg. This is not done just to
-- eliminate duplication, but also because the
-- values in this group are actually implemented only
-- once on the device.
--
-- (If these items were implemented in both ccLoadFw
-- and ccLoadCfg, setting a value in one group would
-- also be reflected in the corresponding variable in
-- the other group).
--
-- All items in this group persist across reboots.
-- 1.3.6.1.4.1.388.11.2.2.6
ccLoad OBJECT IDENTIFIER ::= { ccAdmin 6 }
-- 1.3.6.1.4.1.388.11.2.2.6.1
ccLoadServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the server used for a firmware load,
or configuration file load/store operation."
::= { ccLoad 1 }
-- 1.3.6.1.4.1.388.11.2.2.6.2
ccLoadFtpUsername OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Username for FTP LoadFw or LoadCfg operations."
::= { ccLoad 2 }
-- 1.3.6.1.4.1.388.11.2.2.6.3
ccLoadFtpPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password for FTP LoadFw or LoadCfg operations."
::= { ccLoad 3 }
-- Miscellaneous values not implemented in MIB-2 SNMP
-- group.
-- 1.3.6.1.4.1.388.11.2.2.7
ccSnmp OBJECT IDENTIFIER ::= { ccAdmin 7 }
-- 1.3.6.1.4.1.388.11.2.2.7.1
ccSnmpAclViolations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the total number of SNMP requests rejected
due to ACL violations since boot."
::= { ccSnmp 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.2
ccSnmpLastDeniedIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last SNMP request to be
denied due to ACL violation."
::= { ccSnmp 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.3
ccSnmpV3EngineId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNMPv3 Engine ID"
::= { ccSnmp 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.4
ccSnmpAccess OBJECT IDENTIFIER ::= { ccSnmp 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1
ccSnmpAccessV12Table OBJECT-TYPE
SYNTAX SEQUENCE OF CcSnmpAccessV12Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP v1/v2 access entries."
::= { ccSnmpAccess 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1
ccSnmpAccessV12Entry OBJECT-TYPE
SYNTAX CcSnmpAccessV12Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSnmpAccessV12Index }
::= { ccSnmpAccessV12Table 1 }
CcSnmpAccessV12Entry ::=
SEQUENCE {
ccSnmpAccessV12Index
Integer32,
ccSnmpAccessV12Community
DisplayString,
ccSnmpAccessV12CustomOid
OBJECT IDENTIFIER,
ccSnmpAccessV12OidLimit
INTEGER,
ccSnmpAccessV12Access
INTEGER,
ccSnmpAccessV12Enable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.1
ccSnmpAccessV12Index OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccSnmpAccessV12Entry 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.2
ccSnmpAccessV12Community OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Community Name of the SNMP manager."
::= { ccSnmpAccessV12Entry 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.3
ccSnmpAccessV12CustomOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting OID."
::= { ccSnmpAccessV12Entry 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.4
ccSnmpAccessV12OidLimit OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
custom(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OID Limit whether the entire MIB tree or
a specific OID set."
::= { ccSnmpAccessV12Entry 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.5
ccSnmpAccessV12Access OBJECT-TYPE
SYNTAX INTEGER
{
readOnly(1),
readWrite(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access type whether RO or RW."
::= { ccSnmpAccessV12Entry 5 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.1.1.6
ccSnmpAccessV12Enable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccSnmpAccessV12Entry 6 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2
ccSnmpAccessV3Table OBJECT-TYPE
SYNTAX SEQUENCE OF CcSnmpAccessV3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP v3 access entries."
::= { ccSnmpAccess 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1
ccSnmpAccessV3Entry OBJECT-TYPE
SYNTAX CcSnmpAccessV3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSnmpAccessV3Index }
::= { ccSnmpAccessV3Table 1 }
CcSnmpAccessV3Entry ::=
SEQUENCE {
ccSnmpAccessV3Index
Integer32,
ccSnmpAccessV3User
DisplayString,
ccSnmpAccessV3SecurityLevel
INTEGER,
ccSnmpAccessV3CustomOid
OBJECT IDENTIFIER,
ccSnmpAccessV3OidLimit
INTEGER,
ccSnmpAccessV3Access
INTEGER,
ccSnmpAccessV3AuthAlgorithm
INTEGER,
ccSnmpAccessV3AuthPassword
Password,
ccSnmpAccessV3PrivacyAlgorithm
INTEGER,
ccSnmpAccessV3PrivacyPassword
Password,
ccSnmpAccessV3Enable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.1
ccSnmpAccessV3Index OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccSnmpAccessV3Entry 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.2
ccSnmpAccessV3User OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"v3 User Name."
::= { ccSnmpAccessV3Entry 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.3
ccSnmpAccessV3SecurityLevel OBJECT-TYPE
SYNTAX INTEGER
{
noAuth(1),
authNoPriv(2),
authPriv(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Security Level."
::= { ccSnmpAccessV3Entry 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.4
ccSnmpAccessV3CustomOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting OID."
::= { ccSnmpAccessV3Entry 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.5
ccSnmpAccessV3OidLimit OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
custom(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OID Limit whether the entire MIB tree or
a specific OID set."
::= { ccSnmpAccessV3Entry 5 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.6
ccSnmpAccessV3Access OBJECT-TYPE
SYNTAX INTEGER
{
readOnly(1),
readWrite(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access type whether RO or RW."
::= { ccSnmpAccessV3Entry 6 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.7
ccSnmpAccessV3AuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Algorithm used."
::= { ccSnmpAccessV3Entry 7 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.8
ccSnmpAccessV3AuthPassword OBJECT-TYPE
SYNTAX Password (SIZE (8..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Password."
::= { ccSnmpAccessV3Entry 8 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.9
ccSnmpAccessV3PrivacyAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
aes128(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Privacy Algorithm used."
::= { ccSnmpAccessV3Entry 9 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.10
ccSnmpAccessV3PrivacyPassword OBJECT-TYPE
SYNTAX Password (SIZE (8..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Privacy Password."
::= { ccSnmpAccessV3Entry 10 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.2.1.11
ccSnmpAccessV3Enable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccSnmpAccessV3Entry 11 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.3
ccSnmpAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSnmpAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP access control entries."
::= { ccSnmpAccess 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.3.1
ccSnmpAccessControlEntry OBJECT-TYPE
SYNTAX CcSnmpAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSnmpAccessControlIndex }
::= { ccSnmpAccessControlTable 1 }
CcSnmpAccessControlEntry ::=
SEQUENCE {
ccSnmpAccessControlIndex
Integer32,
ccSnmpAccessControlStartIp
IpAddress,
ccSnmpAccessControlEndIp
IpAddress,
ccSnmpAccessControlEnable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.7.4.3.1.1
ccSnmpAccessControlIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccSnmpAccessControlEntry 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.3.1.2
ccSnmpAccessControlStartIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting IP range of the SNMP manager
allowed to access the switch."
::= { ccSnmpAccessControlEntry 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.3.1.3
ccSnmpAccessControlEndIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ending IP range of the SNMP manager
allowed to access the switch."
::= { ccSnmpAccessControlEntry 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.4.3.1.4
ccSnmpAccessControlEnable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccSnmpAccessControlEntry 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.5
ccSnmpTraps OBJECT IDENTIFIER ::= { ccSnmp 5 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1
ccSnmpTrapSinkV12Table OBJECT-TYPE
SYNTAX SEQUENCE OF CcSnmpTrapSinkV12Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP v1/v2 trap configuration entries."
::= { ccSnmpTraps 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1
ccSnmpTrapSinkV12Entry OBJECT-TYPE
SYNTAX CcSnmpTrapSinkV12Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSnmpTrapSinkV12Index }
::= { ccSnmpTrapSinkV12Table 1 }
CcSnmpTrapSinkV12Entry ::=
SEQUENCE {
ccSnmpTrapSinkV12Index
Integer32,
ccSnmpTrapSinkV12DestinationIp
IpAddress,
ccSnmpTrapSinkV12Port
Integer32,
ccSnmpTrapSinkV12Community
DisplayString,
ccSnmpTrapSinkV12Version
INTEGER,
ccSnmpTrapSinkV12Enable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.1
ccSnmpTrapSinkV12Index OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccSnmpTrapSinkV12Entry 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.2
ccSnmpTrapSinkV12DestinationIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP of Trap Manager."
::= { ccSnmpTrapSinkV12Entry 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.3
ccSnmpTrapSinkV12Port OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination Port of Trap Manager."
::= { ccSnmpTrapSinkV12Entry 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.4
ccSnmpTrapSinkV12Community OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Community Name."
::= { ccSnmpTrapSinkV12Entry 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.5
ccSnmpTrapSinkV12Version OBJECT-TYPE
SYNTAX INTEGER
{
snmpV1(1),
snmpV2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP protocol version."
::= { ccSnmpTrapSinkV12Entry 5 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.1.1.6
ccSnmpTrapSinkV12Enable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccSnmpTrapSinkV12Entry 6 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2
ccSnmpTrapSinkV3Table OBJECT-TYPE
SYNTAX SEQUENCE OF CcSnmpTrapSinkV3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of SNMP v3 trap configuration entries."
::= { ccSnmpTraps 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1
ccSnmpTrapSinkV3Entry OBJECT-TYPE
SYNTAX CcSnmpTrapSinkV3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSnmpTrapSinkV3Index }
::= { ccSnmpTrapSinkV3Table 1 }
CcSnmpTrapSinkV3Entry ::=
SEQUENCE {
ccSnmpTrapSinkV3Index
Integer32,
ccSnmpTrapSinkV3DestinationIp
IpAddress,
ccSnmpTrapSinkV3Port
Integer32,
ccSnmpTrapSinkV3Username
DisplayString,
ccSnmpTrapSinkV3SecurityLevel
INTEGER,
ccSnmpTrapSinkV3AuthAlgorithm
INTEGER,
ccSnmpTrapSinkV3AuthPassword
Password,
ccSnmpTrapSinkV3PrivacyAlgorithm
INTEGER,
ccSnmpTrapSinkV3PrivacyPassword
Password,
ccSnmpTrapSinkV3Enable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.1
ccSnmpTrapSinkV3Index OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccSnmpTrapSinkV3Entry 1 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.2
ccSnmpTrapSinkV3DestinationIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP of Trap Manager."
::= { ccSnmpTrapSinkV3Entry 2 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.3
ccSnmpTrapSinkV3Port OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination Port of Trap Manager."
::= { ccSnmpTrapSinkV3Entry 3 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.4
ccSnmpTrapSinkV3Username OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User name of SNMP v3 user."
::= { ccSnmpTrapSinkV3Entry 4 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.5
ccSnmpTrapSinkV3SecurityLevel OBJECT-TYPE
SYNTAX INTEGER
{
auth(1),
authNoPriv(2),
authPriv(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Security Level."
::= { ccSnmpTrapSinkV3Entry 5 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.6
ccSnmpTrapSinkV3AuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP v3 Authentication Algorithm."
::= { ccSnmpTrapSinkV3Entry 6 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.7
ccSnmpTrapSinkV3AuthPassword OBJECT-TYPE
SYNTAX Password (SIZE (8..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP v3 Authentication Password."
::= { ccSnmpTrapSinkV3Entry 7 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.8
ccSnmpTrapSinkV3PrivacyAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
aes128(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP v3 Privacy Algorithm."
::= { ccSnmpTrapSinkV3Entry 8 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.9
ccSnmpTrapSinkV3PrivacyPassword OBJECT-TYPE
SYNTAX Password (SIZE (8..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNMP v3 Privacy Password."
::= { ccSnmpTrapSinkV3Entry 9 }
-- 1.3.6.1.4.1.388.11.2.2.7.5.2.1.10
ccSnmpTrapSinkV3Enable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccSnmpTrapSinkV3Entry 10 }
-- 1.3.6.1.4.1.388.11.2.2.8
ccCompactFlash OBJECT IDENTIFIER ::= { ccAdmin 8 }
-- 1.3.6.1.4.1.388.11.2.2.8.1
ccCompactFlashCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capacity of the Compact Flash card in Kbyte.
"
::= { ccCompactFlash 1 }
-- The capacity of the flash used in the WS2000 system
-- 1.3.6.1.4.1.388.11.2.2.8.2
ccCompactFlashUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Kbyte in use on the Compact Flash card."
::= { ccCompactFlash 2 }
-- The amount of cosumed space in flash card.
-- For MUs, PORTALs, and WLANs, there are two tables (each),
-- that describe the highest-level summary values. (Those
-- 3*2 tables are found in their respective groups, not here
-- in this group).
--
-- Unlike the other various tables of statistics for MUs,
-- PORTALs, and WLANs, (which are true counters - ever
-- increasing since switch reboot), the values in these tables
-- are all rates/percentages as measured over a finite period
-- of time, called here a 'window'.
--
-- There are two different 'windows': 'Short' and 'Long'.
-- The 'Short' window extends generally over seconds; the
-- 'Long' window generally extends over minutes. (Both are
-- explicitly specified via scalars in this group).
--
-- Additionally, these windows are updated at an
-- 'update interval' that is typically a fraction of the
-- window time. (Also specified via scalars in this group).
--
-- For example, (see scalars for actual values):
-- window update-interval
-- Short 30sec 5sec
-- Long 60min 5min
--
-- Using the example values above, the 'Short' window shows
-- average rates / percentages for the prior 30sec, and is
-- updated every 5sec.
--
-- These values are intended to match the same values reported
-- in the Web UI summary screens.
--
-- Descriptions of each data item are only provided in the
-- ccPortalSumStatsShortTable, (since it occurs first in the
-- MIB, and because unlike the corresponding MU tables, it
-- has the union of all possible columns). For all other
-- values, (ccMuSumStats_, ccPortalSumStatsLong and
-- ccWlanSumStats_), refer to these descriptions.
-- (Did this to avoid massive cut-and-paste which later
-- leads to discrepencies when changes are made to the
-- descriptions).
-- 1.3.6.1.4.1.388.11.2.2.9
ccSumStats OBJECT IDENTIFIER ::= { ccAdmin 9 }
-- 1.3.6.1.4.1.388.11.2.2.9.1
ccSumStatsShortWindow OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds backwards from the specified
timestamp that the the 'Short' window extends backwards in
time."
::= { ccSumStats 1 }
-- 1.3.6.1.4.1.388.11.2.2.9.2
ccSumStatsShortUpdateInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency at which the 'Short' summary stats are
updated."
::= { ccSumStats 2 }
-- 1.3.6.1.4.1.388.11.2.2.9.3
ccSumStatsLongWindow OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as corresponding 'Short' value, for the 'Long' window."
::= { ccSumStats 3 }
-- 1.3.6.1.4.1.388.11.2.2.9.4
ccSumStatsLongUpdateInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as corresponding 'Short' value, for the 'Long' window."
::= { ccSumStats 4 }
-- MIB values to control network management access to the
-- switch.
-- 1.3.6.1.4.1.388.11.2.2.10
ccMgmtAccess OBJECT IDENTIFIER ::= { ccAdmin 10 }
-- 1.3.6.1.4.1.388.11.2.2.10.1
ccMgmtAccessToAllow OBJECT-TYPE
SYNTAX BITS
{
fromLanAppletHttp(0),
fromLanAppletHttps(1),
fromLanCliTelnet(2),
fromLanSsh(3),
fromLanSnmp(4),
fromWanAppletHttp(5),
fromWanAppletHttps(6),
fromWanCliTelnet(7),
fromWanSsh(8),
fromWanSnmp(9),
fromWanFtp(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Types of network management access to permit."
::= { ccMgmtAccess 1 }
-- 1.3.6.1.4.1.388.11.2.2.10.2
ccMgmtAccessAirbeam OBJECT IDENTIFIER ::= { ccMgmtAccess 2 }
-- 1.3.6.1.4.1.388.11.2.2.10.2.1
ccMgmtAccessAirbeamAllow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow Airbeam smart.
(If enabled, Airbeam access is only allowed from the LAN
interfaces)."
::= { ccMgmtAccessAirbeam 1 }
-- 1.3.6.1.4.1.388.11.2.2.10.2.2
ccMgmtAccessAirbeamPassword OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Airbeam password. (username is 'airbeam')."
::= { ccMgmtAccessAirbeam 2 }
-- 1.3.6.1.4.1.388.11.2.2.10.3
ccMgmtAccessAdmin OBJECT IDENTIFIER ::= { ccMgmtAccess 3 }
-- 1.3.6.1.4.1.388.11.2.2.10.3.1
ccMgmtAccessAdminAuth OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of authentication used to authenticate the
administrator.It can be a local database or a radius server.
"
::= { ccMgmtAccessAdmin 1 }
-- T
-- 1.3.6.1.4.1.388.11.2.2.10.3.2
ccMgmtAccessAdminPassword OBJECT-TYPE
SYNTAX Password (SIZE (1..11))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrator password.
Can only be read, (via GET), using a community string
capable of writing, (via SET), the value. If an otherwise
valid community string is used, a string of length 0 is
returned."
::= { ccMgmtAccessAdmin 2 }
-- 1.3.6.1.4.1.388.11.2.2.10.3.4
ccMgmtAccessAdminAuthRadiusServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the radius server which is used to
authenticate the administrator
"
::= { ccMgmtAccessAdmin 4 }
-- ??-CSM: can there be more than one? if so, change to a table.
-- 1.3.6.1.4.1.388.11.2.2.10.3.5
ccMgmtAccessAdminAuthRadiusServerPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of the radius server which is used to
authenticate the administrator"
::= { ccMgmtAccessAdmin 5 }
-- 1.3.6.1.4.1.388.11.2.2.10.3.6
ccMgmtAccessAdminAuthRadiusSharedSecret OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shared secret the radius server which is used to
authenticate the administrator"
::= { ccMgmtAccessAdmin 6 }
-- 1.3.6.1.4.1.388.11.2.2.10.4
ccMgmtAccessSsh OBJECT IDENTIFIER ::= { ccMgmtAccess 4 }
-- 1.3.6.1.4.1.388.11.2.2.10.4.1
ccMgmtAccessSshAuthTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration within which the user can enter the password
after providing the user id."
::= { ccMgmtAccessSsh 1 }
-- 1.3.6.1.4.1.388.11.2.2.10.4.2
ccMgmtAccessSshInactivityTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration within which the server should receive the
keep alive responses from the client.
In SSH v2, the server shall timeout if does not receive
Keep alive responses from the client. "
::= { ccMgmtAccessSsh 2 }
-- 1.3.6.1.4.1.388.11.2.2.10.5
ccMgmtAccessHttpsTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HTTP/HTTPS connection timeout."
::= { ccMgmtAccess 5 }
-- Logging configuration.
-- 1.3.6.1.4.1.388.11.2.2.11
ccLogging OBJECT IDENTIFIER ::= { ccAdmin 11 }
-- 1.3.6.1.4.1.388.11.2.2.11.1
ccLoggingLevel OBJECT-TYPE
SYNTAX INTEGER
{
level0Emergency(0),
level1Alert(1),
level2Critical(2),
level3Errors(3),
level4Warnings(4),
level5Notice(5),
level6Info(6),
level7Debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Level of logging to perform."
::= { ccLogging 1 }
-- 1.3.6.1.4.1.388.11.2.2.11.2
ccLoggingToSyslog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send logs to external syslog."
::= { ccLogging 2 }
-- 1.3.6.1.4.1.388.11.2.2.11.3
ccLoggingSyslogServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP addr of syslog server."
::= { ccLogging 3 }
-- 1.3.6.1.4.1.388.11.2.2.11.4
ccLoggingDeleteCoreFile OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the Core File."
::= { ccLogging 4 }
-- 1.3.6.1.4.1.388.11.2.2.11.5
ccLoggingTransferCoreFile OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer the core file to external FTP server."
::= { ccLogging 5 }
-- Configure NTP on switch.
-- 1.3.6.1.4.1.388.11.2.2.12
ccNtp OBJECT IDENTIFIER ::= { ccAdmin 12 }
-- 1.3.6.1.4.1.388.11.2.2.12.1
ccNtpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable NTP."
::= { ccNtp 1 }
-- 1.3.6.1.4.1.388.11.2.2.12.2
ccNtp0Server OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preferred NTP server IPaddr."
::= { ccNtp 2 }
-- 1.3.6.1.4.1.388.11.2.2.12.3
ccNtp0Port OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preferred NTP server port number."
::= { ccNtp 3 }
-- 1.3.6.1.4.1.388.11.2.2.12.4
ccNtp1Server OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1st alternate NTP server IPaddr."
::= { ccNtp 4 }
-- 1.3.6.1.4.1.388.11.2.2.12.5
ccNtp1Port OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1st alternate NTP server port number."
::= { ccNtp 5 }
-- 1.3.6.1.4.1.388.11.2.2.12.6
ccNtp2Server OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2nd alternate NTP server IPaddr."
::= { ccNtp 6 }
-- 1.3.6.1.4.1.388.11.2.2.12.7
ccNtp2Port OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2nd alternate NTP server port number."
::= { ccNtp 7 }
-- 1.3.6.1.4.1.388.11.2.2.12.8
ccNtpGmtHourOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GMT Hour Offset.
Not implemented in WS2000 2.0"
::= { ccNtp 8 }
-- 1.3.6.1.4.1.388.11.2.2.12.9
ccNtpGmtMinuteOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GMT Minute Offset.
Not implemented in WS2000 2.0"
::= { ccNtp 9 }
-- 1.3.6.1.4.1.388.11.2.2.12.10
ccNtpCurrentDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current date/time.
If NTP is not running, or has not yet synchronized the
time, this value will be 0.
"
::= { ccNtp 10 }
-- 1.3.6.1.4.1.388.11.2.2.12.11
ccNtpSyncInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Synchronization Interval (in minutes)"
::= { ccNtp 11 }
-- 1.3.6.1.4.1.388.11.2.2.14
ccDhcpOptions OBJECT IDENTIFIER ::= { ccAdmin 14 }
-- 1.3.6.1.4.1.388.11.2.2.14.1
ccDhcpOptionsUpdateFwEna OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable updating of firmware using DHCP vendor options
"
::= { ccDhcpOptions 1 }
-- 1.3.6.1.4.1.388.11.2.2.14.2
ccDhcpOptionsUpdateCfgEna OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable updating of configuration using DHCP vendor options"
::= { ccDhcpOptions 2 }
-- 1.3.6.1.4.1.388.11.2.2.14.3
ccDhcpOptionsUpdateInterface OBJECT-TYPE
SYNTAX INTEGER
{
wan(1),
subnet1(2),
subnet2(3),
subnet3(4),
subnet4(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface to use in contacting the FTP or TFTP
server. This is required since the actual firmware
load is accomplished via boot code that does not
contain routing logic."
::= { ccDhcpOptions 3 }
-- 1.3.6.1.4.1.388.11.2.2.14.4
ccDhcpOptionsUpdateFwFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware filename most recently provided
via DHCP options.
The success/failure of actually fetching that
file via TFTP is reported in ccLoadFwSuccess
and ccLoadFwResult.
"
::= { ccDhcpOptions 4 }
-- 1.3.6.1.4.1.388.11.2.2.14.5
ccDhcpOptionsUpdateCfgFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The config filename most recently provided
via DHCP options.
The success/failure of actually fetching that
file via TFTP is reported in ccLoadCfgSuccess
and ccLoadCfgResult.
"
::= { ccDhcpOptions 5 }
-- 1.3.6.1.4.1.388.11.2.2.15
ccRedundancy OBJECT IDENTIFIER ::= { ccAdmin 15 }
-- 1.3.6.1.4.1.388.11.2.2.15.1
ccRedundancyAdminState OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
standby(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of redundancy for this switch.
'standAlone' is for a switch with no redundancy.
'redundantPrimary' and 'redundantStandby' for
when the switch is desired to be part of a pair
of switches for redundancy.
'redundantUpgrade' is used to update the firmware
of one switch of a pair configured for redundancy.
This mode is just like 'standAlone' except that
switch will not adopt portals.
Note that when configuring two switches, both
starting in 'standAlone' state, configure the
primary first. (If you configure the desired
standby first, it will NOT hear heartbeats from
the primary, and will quickly transition to
_OperState = 'redundantPrimary').
"
::= { ccRedundancy 1 }
-- 1.3.6.1.4.1.388.11.2.2.15.2
ccRedundancyOperState OBJECT-TYPE
SYNTAX INTEGER
{
redundancy(1),
upgrade(2),
standAlone(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The actual state of redundancy for this switch."
::= { ccRedundancy 2 }
-- 1.3.6.1.4.1.388.11.2.2.15.3
ccRedundancyHeartbeatInterface OBJECT-TYPE
SYNTAX INTEGER
{
port1(1),
port2(2),
port3(3),
port4(4),
port5(5),
port6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface to use in contacting the FTP or TFTP
server. This is required since the actual firmware
load is accomplished via boot code that does not
contain routing logic."
::= { ccRedundancy 3 }
-- 1.3.6.1.4.1.388.11.2.2.15.4
ccRedundancyHeartbeatInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration in seconds between consecutive heartbeats. User can control the
frequency of hearbeats by tuning this parameter."
::= { ccRedundancy 4 }
-- 1.3.6.1.4.1.388.11.2.2.15.5
ccRedundancyRevertDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration which the master WS2000 shall wait before
taking over from a backup WS2000."
::= { ccRedundancy 5 }
-- 1.3.6.1.4.1.388.11.2.2.15.6
ccRedundancyOperMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Operational Mode of the switch."
::= { ccRedundancy 6 }
-- 1.3.6.1.4.1.388.11.2.2.16
ccCertMgnt OBJECT IDENTIFIER ::= { ccAdmin 16 }
-- The ccSelfCerts group allows the admin to create a
-- certificate request, send it off to a Certificate
-- Authority(CA) to be signed, and then import the signed
-- certificate.
--
-- The process can be broken down into the following steps:
-- 1. Create a row in the ccCertMgntSelfCertsReqTable.
-- 2. Fill out ccCertMgntSelfCertsReqKeyId and
-- ccCertMgntSelfCertsReqSubject and any optional fields
-- 3. Set ccCertMgntSelfCertsReqGenReq to true
-- 4. Read certificate request from
-- ccCertMgntSelfCertsReqCertReqStr
-- 5. Get the certificate signed by a CA
-- 6. Write the signed certificate string to
-- ccCertMgntSelfCertsSignedStr
-- 7. Set ccCertMgntSelfCertsSignedImport to true and pull
-- for progress. This step will create a row in
-- ccCertMgntSelfCertsSignedTable.
--
-- 1.3.6.1.4.1.388.11.2.2.16.1
ccCertMgntSelfCerts OBJECT IDENTIFIER ::= { ccCertMgnt 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1
ccCertMgntSelfCertsReqTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcCertMgntSelfCertsReqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the admin to create and store up to
three certificate signature requests. The required
fields are ccSelfCertsReqKeyId and ccSelfCertReqSubject.
"
::= { ccCertMgntSelfCerts 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1
ccCertMgntSelfCertsReqEntry OBJECT-TYPE
SYNTAX CcCertMgntSelfCertsReqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccCertMgntSelfCertsReqIndex }
::= { ccCertMgntSelfCertsReqTable 1 }
CcCertMgntSelfCertsReqEntry ::=
SEQUENCE {
ccCertMgntSelfCertsReqIndex
Integer32,
ccCertMgntSelfCertsReqKeyId
DisplayString,
ccCertMgntSelfCertsReqSubject
DisplayString,
ccCertMgntSelfCertsReqDept
DisplayString,
ccCertMgntSelfCertsReqOrg
DisplayString,
ccCertMgntSelfCertsReqCity
DisplayString,
ccCertMgntSelfCertsReqState
DisplayString,
ccCertMgntSelfCertsReqPostal
DisplayString,
ccCertMgntSelfCertsReqCountry
DisplayString,
ccCertMgntSelfCertsReqEmail
DisplayString,
ccCertMgntSelfCertsReqDomain
DisplayString,
ccCertMgntSelfCertsReqIp
IpAddress,
ccCertMgntSelfCertsReqSigAlgo
INTEGER,
ccCertMgntSelfCertsReqKeyLen
INTEGER,
ccCertMgntSelfCertsReqGenReq
DoActionShowProgress,
ccCertMgntSelfCertsReqCertReqStr
DisplayString,
ccCertMgntSelfCertsReqRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.1
ccCertMgntSelfCertsReqIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index."
::= { ccCertMgntSelfCertsReqEntry 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.2
ccCertMgntSelfCertsReqKeyId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..7))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID for the certificate. Use this field to distinguish
between certificates.
This is a required field.
"
::= { ccCertMgntSelfCertsReqEntry 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.3
ccCertMgntSelfCertsReqSubject OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subject of the certificate.
This is a required field.
"
::= { ccCertMgntSelfCertsReqEntry 3 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.4
ccCertMgntSelfCertsReqDept OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The department that is making the request.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 4 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.5
ccCertMgntSelfCertsReqOrg OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the organization or company that is making the
request.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 5 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.6
ccCertMgntSelfCertsReqCity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the city where the organization resides.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 6 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.7
ccCertMgntSelfCertsReqState OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the state where the organzation resides.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 7 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.8
ccCertMgntSelfCertsReqPostal OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The postal code (zip code in US) for the organization.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 8 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.9
ccCertMgntSelfCertsReqCountry OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The two-letter ISO code for the country where the
organization resides.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 9 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.10
ccCertMgntSelfCertsReqEmail OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email address to be used for identification purposes.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 10 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.11
ccCertMgntSelfCertsReqDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..49))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain name to associate with the certificate.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 11 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.12
ccCertMgntSelfCertsReqIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WAN IP of the WS 2000 Wireless Switch.
Contact your CA to determine whether this field is required."
::= { ccCertMgntSelfCertsReqEntry 12 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.13
ccCertMgntSelfCertsReqSigAlgo OBJECT-TYPE
SYNTAX INTEGER
{
cryptoMd5Rsa(1),
cryptoSha1Rsa(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The signature algorithm you want used for the certificate.
The options are:
MD5-RSA: This option uses the Message Digest 5 algorithm in
combination with RSA encryption.
SHA1-RSA: This options uses the Secure Hash Algorithm 1 in
combination with RSA encryption.
This is a required field.
"
::= { ccCertMgntSelfCertsReqEntry 13 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.14
ccCertMgntSelfCertsReqKeyLen OBJECT-TYPE
SYNTAX INTEGER
{
keylen512(1),
keylen1024(2),
keylen2048(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired length of the key. Possible values are 512,
1024, and 2048. Select a lower number to enhance
performance. Select a large number to enhance security."
::= { ccCertMgntSelfCertsReqEntry 14 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.15
ccCertMgntSelfCertsReqGenReq OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start generating certificate request."
::= { ccCertMgntSelfCertsReqEntry 15 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.16
ccCertMgntSelfCertsReqCertReqStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The generated certificate request string."
::= { ccCertMgntSelfCertsReqEntry 16 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.1.1.17
ccCertMgntSelfCertsReqRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { ccCertMgntSelfCertsReqEntry 17 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.2
ccCertMgntSelfCertsIdName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ID Name of the signed certificate."
::= { ccCertMgntSelfCerts 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.3
ccCertMgntSelfCertsSignedStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The signed certificate."
::= { ccCertMgntSelfCerts 3 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.4
ccCertMgntSelfCertsSignedImport OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start importing the signed certificate from
ccCertMgntSelfCertsSignedStr to a new row in
ccCertMgntSelfCertsSignedTable. "
::= { ccCertMgntSelfCerts 4 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5
ccCertMgntSelfCertsSignedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcCertMgntSelfCertsSignedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the admin to store up to three signed
certificates.
This table supports a max size of three rows."
::= { ccCertMgntSelfCerts 5 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1
ccCertMgntSelfCertsSignedEntry OBJECT-TYPE
SYNTAX CcCertMgntSelfCertsSignedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccCertMgntSelfCertsSignedIndex }
::= { ccCertMgntSelfCertsSignedTable 1 }
CcCertMgntSelfCertsSignedEntry ::=
SEQUENCE {
ccCertMgntSelfCertsSignedIndex
Integer32,
ccCertMgntSelfCertsSignedKeyId
DisplayString,
ccCertMgntSelfCertsSignedIssuerName
DisplayString,
ccCertMgntSelfCertsSignedSubject
DisplayString,
ccCertMgntSelfCertsSignedSerialNumber
DisplayString,
ccCertMgntSelfCertsSignedExpiry
DateAndTime,
ccCertMgntSelfCertsSignedDeleteRow
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.1
ccCertMgntSelfCertsSignedIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index."
::= { ccCertMgntSelfCertsSignedEntry 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.2
ccCertMgntSelfCertsSignedKeyId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID for the certificate. Use this field to distinguish
between certificates. "
::= { ccCertMgntSelfCertsSignedEntry 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.3
ccCertMgntSelfCertsSignedIssuerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the certificate authority who signed the
certificate."
::= { ccCertMgntSelfCertsSignedEntry 3 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.4
ccCertMgntSelfCertsSignedSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subject of the certificate."
::= { ccCertMgntSelfCertsSignedEntry 4 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.5
ccCertMgntSelfCertsSignedSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the certificate."
::= { ccCertMgntSelfCertsSignedEntry 5 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.6
ccCertMgntSelfCertsSignedExpiry OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date when the certificate expires."
::= { ccCertMgntSelfCertsSignedEntry 6 }
-- 1.3.6.1.4.1.388.11.2.2.16.1.5.1.7
ccCertMgntSelfCertsSignedDeleteRow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete row."
::= { ccCertMgntSelfCertsSignedEntry 7 }
-- The ccCACerts group allows the admin to import CA
-- certificates.
--
-- The process can be broken down into the following steps:
-- 1. Write the certificate text to ccCACertsStr
-- 2. Set ccCACertsImport to true and pull for progress. This
-- step will create a row in ccCACertsTable.
--
--
--
--
-- 1.3.6.1.4.1.388.11.2.2.16.2
ccCACerts OBJECT IDENTIFIER ::= { ccCertMgnt 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.1
ccCACertsStr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CA certificate to be imported."
::= { ccCACerts 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.2
ccCACertsImport OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start import operation for the CA certificate stored in
ccCACertsStr. This operation adds a row in ccCACertsTable."
::= { ccCACerts 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3
ccCACertsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcCACertsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows the admin to store up to three CA
certificates.
This table supports a max size of three rows."
::= { ccCACerts 3 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1
ccCACertsEntry OBJECT-TYPE
SYNTAX CcCACertsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccCACertsIndex }
::= { ccCACertsTable 1 }
CcCACertsEntry ::=
SEQUENCE {
ccCACertsIndex
Integer32,
ccCACertsKeyId
DisplayString,
ccCACertsIssuerName
DisplayString,
ccCACertsSubject
DisplayString,
ccCACertsSerialNumber
DisplayString,
ccCACertsExpiry
DateAndTime,
ccCACertsDeleteRow
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.1
ccCACertsIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index."
::= { ccCACertsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.2
ccCACertsKeyId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID for the certificate. Use this field to distinguish
between certificates. "
::= { ccCACertsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.3
ccCACertsIssuerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the certificate authority."
::= { ccCACertsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.4
ccCACertsSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subject of the certificate."
::= { ccCACertsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.5
ccCACertsSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the certificate."
::= { ccCACertsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.6
ccCACertsExpiry OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date when the certificate expires."
::= { ccCACertsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.2.16.2.3.1.7
ccCACertsDeleteRow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete Row."
::= { ccCACertsEntry 7 }
-- Notifications implemented on the switch.
--
-- For each notification, a 'pseudo printf' is shown to
-- illustrate how the var-binds sent with the notification
-- make for an informative notification message.
--
-- The notation '%s1' is used to denote the first [optional]
-- var-bind in the notification. '%i1' is used to denote the
-- instance of the first [optional] var-bind in the
-- notification.
-- 1.3.6.1.4.1.388.11.2.3
ccNotifications OBJECT IDENTIFIER ::= { ws2k 3 }
-- 1.3.6.1.4.1.388.11.2.3.1
ccPortalAdopted NOTIFICATION-TYPE
OBJECTS { ccPortalLastMac }
STATUS current
DESCRIPTION
"A Portal has been adopted by the switch.
Example:
Portal MAC=%s1 has been adopted."
::= { ccNotifications 1 }
-- 1.3.6.1.4.1.388.11.2.3.2
ccPortalUnAdopted NOTIFICATION-TYPE
OBJECTS { ccPortalLastMac, ccPortalLastReason }
STATUS current
DESCRIPTION
"A Portal has been un-adopted by the switch.
Example:
Portal MAC=%s1 has been UN-adopted for reason %s2."
::= { ccNotifications 2 }
-- 1.3.6.1.4.1.388.11.2.3.3
ccPortalDenied NOTIFICATION-TYPE
OBJECTS { ccPortalLastMac, ccPortalLastReason }
STATUS current
DESCRIPTION
"A Portal has been denied adoption by the switch.
Example:
Portal MAC=%s1 has been denied adopted for reason %s2."
::= { ccNotifications 3 }
-- 1.3.6.1.4.1.388.11.2.3.4
ccMuAssociated NOTIFICATION-TYPE
OBJECTS { ccMuLastMac, ccMuLastPortal }
STATUS current
DESCRIPTION
"An MU has been associated to a Portal adopted
by this switch.
Example:
MU MAC=%s1 has associated to Portal MAC=%s2."
::= { ccNotifications 4 }
-- 1.3.6.1.4.1.388.11.2.3.5
ccMuUnAssociated NOTIFICATION-TYPE
OBJECTS { ccMuLastMac, ccMuLastPortal, ccMuLastReason }
STATUS current
DESCRIPTION
"An MU has been un-associated to a Portal adopted
by this switch.
Example:
MU MAC=%s1 has UN-associated from Portal MAC=%s2 for
reason %s3."
::= { ccNotifications 5 }
-- 1.3.6.1.4.1.388.11.2.3.6
ccMuDenied NOTIFICATION-TYPE
OBJECTS { ccMuLastMac, ccMuLastPortal, ccMuLastReason }
STATUS current
DESCRIPTION
"An MU has been denied association to a Portal
adopted by this switch.
Example:
MU MAC=%s1 has been denied association to Portal MAC=%s2
for reason %s3."
::= { ccNotifications 6 }
-- 1.3.6.1.4.1.388.11.2.3.7
ccConfigChange NOTIFICATION-TYPE
OBJECTS { ccCfgHistChangeTime, ccCfgHistChangeCount }
STATUS current
DESCRIPTION
"The configuration of this switch has changed.
Example:
The configuration of the switch changed as of
sysUpTime=%s1; the total number of config changes
since reboot is now %s2."
::= { ccNotifications 7 }
-- 1.3.6.1.4.1.388.11.2.3.8
ccSnmpAclViolation NOTIFICATION-TYPE
OBJECTS { ccSnmpLastDeniedIpAddr, ccSnmpAclViolations }
STATUS current
DESCRIPTION
"An attempt to communicate via SNMP to the switch
has been denied based on configured ACLs.
Example:
IP-addr %s1 has attempted, but been prohibited, from
communicating with the switch via SNMP; total number
of such ACL violations = %s2."
::= { ccNotifications 8 }
-- 1.3.6.1.4.1.388.11.2.3.9
ccPortStatusChange NOTIFICATION-TYPE
OBJECTS { ccPortStatus, ifDescr }
STATUS current
DESCRIPTION
"A [physical] port's state has changed from up-->down, or
down-->up.
Example:
Port name 'x' has changed state to %s1."
::= { ccNotifications 9 }
-- 1.3.6.1.4.1.388.11.2.3.10
ccCfAlmostFull NOTIFICATION-TYPE
OBJECTS { ccCompactFlashCapacity, ccCompactFlashUsed, ccTrapCtrlCfAlmostFullThreshold }
STATUS current
DESCRIPTION
"The compact flash is almost full; (it has crossed the
threshold defined by ccTrapCtrlCfAlmostFullThreshold).
Example:
The compact flash is almost full;
Used=%s1, Capacity=%s2, Threshold=%s3."
::= { ccNotifications 10 }
-- 1.3.6.1.4.1.388.11.2.3.11
ccFirewallUnderAttack NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlFirewallUnderAttackDescription }
STATUS current
DESCRIPTION
"The firewall has detected an attack in progress.
Example:
The WAN firewall is being attached by method %s1."
::= { ccNotifications 11 }
-- 1.3.6.1.4.1.388.11.2.3.12
ccRadarDetected NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlRadarDetectedPortalMac, ccTrapCtrlRadarDetectedChannel }
STATUS current
DESCRIPTION
"Radar has been detected on a Portal channel.
Example:
Radar has been detected on Portal MAC=%s1, on channel %s2."
::= { ccNotifications 12 }
-- ??-TW/CM: add 1 UINT32 to show the current/live value for
-- the variable that this trap is saying crossed a threshold.
-- Fortunately, UINT32 works for every single SumStat data
-- item, (even Signal and Noise, which for traps are reported
-- and configured as POSITIVE values not negative).
--
-- Also, add 3-9 more on top of that to show the recent
-- history? If so, beware: the threshold trap is calculated
-- on the SHORT items, but is it calculated on 5sec interval,
-- or on a 30sec interval. If the former, can show the less
-- fresh 5sec-by-5sec values. If the latter, showing those
-- values might look bad - see this example:
--
-- threshold=15
-- Tnow T-minus-5sec T-10 T-15 T-20 T-25 T-30
-- 17 13 14 17 14 13 11
--
-- This shows that the value peaked above the threshold 15sec
-- earlier, but it was not 'caught'. Worse yet, that may
-- bring to the customer's attention that in some cases it is
-- quite possible that such a peak between 30sec threshold
-- checks might be entirely missed.
--
-- If trap thresholds are only checked every 30sec, the
-- 'history' values reported, (if any), should probably be
-- the 10min LONG sub-buckets.
--
-- Ideally, (if performance permits), the threshold trap
-- checking should occur at the 5sec interval, and the history
-- values reported are the SHORT sub-buckets, PLUS the LONG
-- sub-buckets.
--
-- Decided 5/20 to wait to see how Tina's implementation
-- works-out and then maybe add the 1 current value and/or
-- several history values.
--
-- This comment applies equally to the Portal, WLAN, and
-- switch ccSumStats_ traps.
-- 1.3.6.1.4.1.388.11.2.3.13
ccSumStatsMu NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlSumStatsDescr, ccTrapCtrlSumStatsThresholdMu, ccTrapCtrlSumStatsUnits, ccMuMac, ccMuIpAddr
}
STATUS current
DESCRIPTION
"A summary statistic has crossed the prescribed threshold
by an MU.
Example:
Threshold '%s1' of value %s2 (units:%s3) has been crossed
by MU MAC=%s4 with IP-addr=%s5."
::= { ccNotifications 13 }
-- 1.3.6.1.4.1.388.11.2.3.14
ccSumStatsPortal NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlSumStatsIndex, ccTrapCtrlSumStatsThresholdPortals, ccTrapCtrlSumStatsUnits, ccPortalIndex, ccPortalMac,
ccPortalName, ccPortalLocation }
STATUS current
DESCRIPTION
"A summary statistic has crossed the prescribed threshold
by a Portal.
Example:
Threshold #%s1 of value %s2 (units:%s3) has been crossed
by Portal index=%s4 with MAC=%s5."
::= { ccNotifications 14 }
-- 1.3.6.1.4.1.388.11.2.3.15
ccSumStatsWlan NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlSumStatsDescr, ccTrapCtrlSumStatsThresholdWlans, ccTrapCtrlSumStatsUnits, ccWlanIndex, ccWlanName,
ccWlanEssid }
STATUS current
DESCRIPTION
"A summary statistic has crossed the prescribed threshold
by a WLAN.
Example:
Threshold #%s1 of value %s2 (units:%s3) has been crossed
by WLAN index=%s4 with name=%s5."
::= { ccNotifications 15 }
-- 1.3.6.1.4.1.388.11.2.3.16
ccSumStatsSwitch NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlSumStatsDescr, ccTrapCtrlSumStatsThresholdSwitch, ccTrapCtrlSumStatsUnits }
STATUS current
DESCRIPTION
"A summary statistic has crossed the prescribed threshold
by the entire Switch.
Example:
Threshold %s1 of value %s2 (units:%s3) has been crossed
by the entire switch."
::= { ccNotifications 16 }
-- 1.3.6.1.4.1.388.11.2.3.17
ccLanVlanActivated NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlLanVlanActivatedVlanId }
STATUS current
DESCRIPTION
"A Vlan is activated. When ever a MU is associated with
the switch, and it receives a VLAN attribute from the
radius server, the specified VLAN is activated.
"
::= { ccNotifications 17 }
-- 1.3.6.1.4.1.388.11.2.3.18
ccDhcpOptionsFileTransferStatus NOTIFICATION-TYPE
OBJECTS { ccTrapCtrlDhcpOptionsFileTransferStatusRequested, ccLoadFwServerFilename, ccLoadFwSuccess, ccLoadFwResult, ccLoadCfgServerFilename,
ccLoadCfgSuccess, ccLoadCfgResult }
STATUS current
DESCRIPTION
"Trap to say that the device received DHCP
options instructing it to load a new fw or
cnfg file, and that it has completed the
transfer. The varbinds tell if the transfer
was successful.
Note that this trap will NOT be issued if the
DHCP options specify the same file as was
most recently loaded.
Example:
(if FW bit set in _Requested):
The switch was instructed to load firmware %s2,
and success=%s3 with result=%s4.
(if CFG bit set in _Requested):
The switch was instructed to load config %s5,
and success=%s6 with result=%s7.
"
::= { ccNotifications 18 }
-- 1.3.6.1.4.1.388.11.2.3.19
ccRedundancyStateChange NOTIFICATION-TYPE
OBJECTS { ccRedundancyOperState, ccTrapCtrlRedundancyPreviousOperState }
STATUS current
DESCRIPTION
"The state of this switch's ccRedundancyOperState
has changed.
Example:
The switch has changed it's redundancy state to %s1.
"
::= { ccNotifications 19 }
-- !!- OID: .1000 - to save room above for notifications.
-- 1.3.6.1.4.1.388.11.2.3.1000
ccTrapCtrl OBJECT IDENTIFIER ::= { ccNotifications 1000 }
-- 1.3.6.1.4.1.388.11.2.3.1000.1
ccTrapCtrlEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcTrapCtrlEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Trap Enable entries."
::= { ccTrapCtrl 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.1.1
ccTrapCtrlEnableEntry OBJECT-TYPE
SYNTAX CcTrapCtrlEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccTrapCtrlEnableIndex }
::= { ccTrapCtrlEnableTable 1 }
CcTrapCtrlEnableEntry ::=
SEQUENCE {
ccTrapCtrlEnableIndex
INTEGER,
ccTrapCtrlEnableName
DisplayString,
ccTrapCtrlEnable
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.3.1000.1.1.1
ccTrapCtrlEnableIndex OBJECT-TYPE
SYNTAX INTEGER
{
trapCtrlPortalAdopted(1),
trapCtrlPortalUnAdopted(2),
trapCtrlPortalDeniedAdoption(3),
trapCtrlMuAssociated(4),
trapCtrlMuUnAssociated(5),
trapCtrlMuDeniedAssociation(6),
trapCtrlSnmpAuthFailure(7),
trapCtrlSnmpAclViolation(8),
trapCtrlSnmpColdStart(9),
trapCtrlSnmpConfigChanged(10),
trapCtrlCfAlmostFull(11),
trapCtrlPortStatusChange(12),
trapCtrlDenialofService(13),
trapCtrlMuAuthDenied(14),
trapCtrlRadarDetected(15),
trapCtrlRogueApDetected(16)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccTrapCtrlEnableEntry 1 }
-- ??-India: add the other 18 enum values.
-- 1.3.6.1.4.1.388.11.2.3.1000.1.1.2
ccTrapCtrlEnableName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Trap."
::= { ccTrapCtrlEnableEntry 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.1.1.3
ccTrapCtrlEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disbale a particular Trap."
::= { ccTrapCtrlEnableEntry 3 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2
ccTrapCtrlDetails OBJECT IDENTIFIER ::= { ccTrapCtrl 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.1
ccTrapCtrlPortalAdopted OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.2
ccTrapCtrlPortalUnAdopted OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.3
ccTrapCtrlPortalDenied OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 3 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.4
ccTrapCtrlMuAssociated OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 4 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.5
ccTrapCtrlMuUnAssociated OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 5 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.6
ccTrapCtrlMuDenied OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 6 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.7
ccTrapCtrlConfigChange OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 7 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.8
ccTrapCtrlSnmpAclViolation OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 8 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.9
ccTrapCtrlPortStatusChange OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 9 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.10
ccTrapCtrlCfAlmostFull OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 10 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.10.1
ccTrapCtrlCfAlmostFullThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A ccCfAlmostFull trap will be sent when less than this
number of bytes are remained on the Compact Flash card.
The trap is currently scheduled to fire every 5 minutes
when the condition is met.
"
::= { ccTrapCtrlCfAlmostFull 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.11
ccTrapCtrlFirewallUnderAttack OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 11 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.11.1
ccTrapCtrlFirewallUnderAttackDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Description of Firewall Under Attack."
::= { ccTrapCtrlFirewallUnderAttack 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.11.2
ccTrapCtrlFirewallUnderAttackRateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max rate at which ccFirewallUnderAttack
traps/notifications will be sent from the switch.
If the switch detects a FirewallUnderAttack condition and
it has NOT been at least this many seconds since the
last ccFirewallUnderAttack trap/notification, this current
event will NOT result in a trap/notification.
If this value is set to 0, every such event results in a
trap/notification.
Factory-default state is 1 [second].
"
::= { ccTrapCtrlFirewallUnderAttack 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.12
ccTrapCtrlRadarDetected OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 12 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.12.1
ccTrapCtrlRadarDetectedPortalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MAC address of the Portal that has detected Radar.
(Note that this variable is accessible-for-notify only)."
::= { ccTrapCtrlRadarDetected 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.12.2
ccTrapCtrlRadarDetectedChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Channel on which Radar has been detected.
(Note that this variable is accessible-for-notify only)."
::= { ccTrapCtrlRadarDetected 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13
ccTrapCtrlSumStats OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 13 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1
ccTrapCtrlSumStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcTrapCtrlSumStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table configures thresholds that can be monitored for
- all MUs and/or
- all Portals and/or
- all WLANs and/or
- for the entire switch
When a given threshold is crossed, it generates the
appropriate corresponding notification, (ccSumStats_:
_MU, _Portal, _WLAN, or _Switch).
Some thresholds result in notifications when exceeded, and
some when the current value sinks below the threshold.
This is indicated by the wording of the entry in
the entry's _Descr value.
In all cases, the summary stat being monitored is the Short
value, never the Long value.
Note that for thresholds of type thresholdsAvgMuSignal &
thresholdsAvgMuNoise, the values being 'watched' are
actually negative. In these cases the threshold is
specified as a Unsigned32. For example, if you wish to
trap on Signal being worse than -75dBm, enter '70'. This
works since a user would never want to trap on a threshold
of Sinal worse than +10dBm. (SNR is not an issue, since
that is a positive value).
Any values reported as var-binds in the resultant trap(s)
are likewise reported as positive values."
::= { ccTrapCtrlSumStats 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1
ccTrapCtrlSumStatsEntry OBJECT-TYPE
SYNTAX CcTrapCtrlSumStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rows/instances in this table occur at the exact same
indices as the corresponding monitored data occurs in the
_SumStats tables.
For example, row #2 / instance .2 represents the
threshold(s) for the _PktsPerSec values for MU, Portal,
WLAN, and Switch.
If a given threshold does not make sense for one of those
4 entities, its corresponding TruthValue will be false."
INDEX { ccTrapCtrlSumStatsIndex }
::= { ccTrapCtrlSumStatsTable 1 }
CcTrapCtrlSumStatsEntry ::=
SEQUENCE {
ccTrapCtrlSumStatsIndex
INTEGER,
ccTrapCtrlSumStatsDescr
DisplayString,
ccTrapCtrlSumStatsUnits
DisplayString,
ccTrapCtrlSumStatsCanBeSetMu
TruthValue,
ccTrapCtrlSumStatsThresholdMu
Unsigned32,
ccTrapCtrlSumStatsCanBeSetPortal
TruthValue,
ccTrapCtrlSumStatsThresholdPortals
Unsigned32,
ccTrapCtrlSumStatsCanBeSetWlan
TruthValue,
ccTrapCtrlSumStatsThresholdWlans
Unsigned32,
ccTrapCtrlSumStatsCanBeSetSwitch
TruthValue,
ccTrapCtrlSumStatsThresholdSwitch
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.1
ccTrapCtrlSumStatsIndex OBJECT-TYPE
SYNTAX INTEGER
{
unusedTimestamp(1),
unusedNumPkts(2),
thresholdsPktsPerSec(3),
unusedPktsPerSecTx(4),
unusedPktsPerSecRx(5),
thresholdsThroughput(6),
unusedThroughputTx(7),
unusedThroughputRx(8),
thresholdsAvgBitSpeed(9),
thresholdsAvgMuSignal(10),
thresholdsAvgMuNoise(11),
thresholdsAvgMuSnr(12),
thresholdsPctNUcastPkts(13),
thresholdsPpmTxWithRetires(14),
thresholdsPpmTxDropped(15),
thresholdsTxAvgRetries(16),
thresholdsPpmRxUndecrypt(17),
thresholdsTotalMus(18),
thresholdsPctRfUtil(19),
thresholdsPctDropped(20)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index into table. Note that specific thresholds occur at
specific instance values as denoted by the enumeration
values assigned to this variable."
::= { ccTrapCtrlSumStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.2
ccTrapCtrlSumStatsDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the threshold."
::= { ccTrapCtrlSumStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.3
ccTrapCtrlSumStatsUnits OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of the the threshold."
::= { ccTrapCtrlSumStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.4
ccTrapCtrlSumStatsCanBeSetMu OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the threshold can be set for MUs.
If false, attempting the threshold will return a READ-ONLY."
::= { ccTrapCtrlSumStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.5
ccTrapCtrlSumStatsThresholdMu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold for all MUs.
If 0, no threshold checking is performed."
::= { ccTrapCtrlSumStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.6
ccTrapCtrlSumStatsCanBeSetPortal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the threshold can be set for Portals.
If false, attempting the threshold will return a READ-ONLY."
::= { ccTrapCtrlSumStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.7
ccTrapCtrlSumStatsThresholdPortals OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold for all Portals.
If 0, no threshold checking is performed."
::= { ccTrapCtrlSumStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.8
ccTrapCtrlSumStatsCanBeSetWlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the threshold can be set for Wlans.
If false, attempting the threshold will return a READ-ONLY."
::= { ccTrapCtrlSumStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.9
ccTrapCtrlSumStatsThresholdWlans OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold for all Wlans.
If 0, no threshold checking is performed."
::= { ccTrapCtrlSumStatsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.10
ccTrapCtrlSumStatsCanBeSetSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the threshold can be set for the entire switch.
If false, attempting the threshold will return a READ-ONLY."
::= { ccTrapCtrlSumStatsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.1.1.11
ccTrapCtrlSumStatsThresholdSwitch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold for the entire Switch.
If 0, no threshold checking is performed."
::= { ccTrapCtrlSumStatsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.13.2
ccTrapCtrlSumStatsMinPktsForTrap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum number of packets that must be in a
window/dataset before any of the threshold traps
will 'fire'."
::= { ccTrapCtrlSumStats 2 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.14
ccTrapCtrlSumStatsPortal OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 14 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.15
ccTrapCtrlSumStatsWlan OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 15 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.16
ccTrapCtrlSumStatsSwitch OBJECT-IDENTITY
STATUS current
DESCRIPTION
"(place-holder for future use and to keep the last OID of
each ccTrapCtrl_ item here to match the last OID of the
corresponding notification)."
::= { ccTrapCtrlDetails 16 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.17
ccTrapCtrlLanVlanActivated OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 17 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.17.1
ccTrapCtrlLanVlanActivatedVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..31)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VLAN ID to which MU has been associated.
(Note that this variable is accessible-for-notify only)."
::= { ccTrapCtrlLanVlanActivated 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.18
ccTrapCtrlDhcpOptionsFileTransferStatus OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 18 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.18.1
ccTrapCtrlDhcpOptionsFileTransferStatusRequested OBJECT-TYPE
SYNTAX BITS
{
dhcpRequestedFwLoad(0),
dhcpRequestedCfgLoad(1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"DHCP request received.
(Note that this variable is accessible-for-notify only)."
::= { ccTrapCtrlDhcpOptionsFileTransferStatus 1 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.19
ccTrapCtrlRedundancyStateChange OBJECT IDENTIFIER ::= { ccTrapCtrlDetails 19 }
-- 1.3.6.1.4.1.388.11.2.3.1000.2.19.1
ccTrapCtrlRedundancyPreviousOperState OBJECT-TYPE
SYNTAX INTEGER
{
standAlone(1),
redundantPrimary(2),
redundantStandby(3),
redundantUpgrade(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The actual state of redundancy for this switch."
::= { ccTrapCtrlRedundancyStateChange 1 }
-- Values for the radio (RF) side of the switch.
-- 1.3.6.1.4.1.388.11.2.4
ccRf OBJECT IDENTIFIER ::= { ws2k 4 }
-- This group contains MIB values that describe the
-- Access Ports known to this WS2000.
-- 1.3.6.1.4.1.388.11.2.4.1
ccAp OBJECT IDENTIFIER ::= { ccRf 1 }
-- 1.3.6.1.4.1.388.11.2.4.1.1
ccApTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all Access Ports that contain
at least one Portal that has been adopted by this
WS2000."
::= { ccAp 1 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1
ccApEntry OBJECT-TYPE
SYNTAX CcApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccApIndex }
::= { ccApTable 1 }
CcApEntry ::=
SEQUENCE {
ccApIndex
INTEGER,
ccApNicMac
PhysAddress,
ccApModelNumber
DisplayString,
ccApSerialNumber
DisplayString,
ccApPcbRevision
DisplayString,
ccApBootLoaderRev
DisplayString,
ccApWispVersion
DisplayString,
ccApRuntimeFwVersion
DisplayString,
ccApNumPortals
Unsigned32,
ccApPointersToPortals
MultiPointer255
}
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.1
ccApIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Small, arbitrary integer index."
::= { ccApEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.2
ccApNicMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of this Access Port."
::= { ccApEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.3
ccApModelNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Model number of the Access Port."
::= { ccApEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.4
ccApSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number of this Access Port."
::= { ccApEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.5
ccApPcbRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of the printed circuit board for this
Access Port."
::= { ccApEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.6
ccApBootLoaderRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of the boot loader code in this Access
Port."
::= { ccApEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.7
ccApWispVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the WISP (AP-switch) protocol
implemented by this Access Port."
::= { ccApEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.8
ccApRuntimeFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of run-time code on this Access Port."
::= { ccApEntry 8 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.9
ccApNumPortals OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Portals implemented on this
Access Port."
::= { ccApEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.1.1.1.10
ccApPointersToPortals OBJECT-TYPE
SYNTAX MultiPointer255
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If bit <n> of this value is set, this ApTable
entry 'points' to entry <n> in the Portal Table.
Such a reference conveys that the Portal entry
pointed-to represents a Portal contained in the
Access Port represented by this entry.
Note that since one Access Port can implement 1,
2, (and in the future possibly more), Portals,
this 'pointer' field had to be a bit-mask."
::= { ccApEntry 10 }
-- This group contains MIB values that describe the
-- Portals known to and adopted by this WS2000.
--
-- An Access Port will contain 1, 2, (and in the
-- future, possibly more), 'Portals'. Such Portals
-- may be thought of as the radio portion of an
-- Access Port.
--
-- Descriptions of each data item are only provided here in
-- the Portal tables, (since it occurs first in the MIB).
-- For the nearly identical values in the MU and WLAN tables,
-- refer back to the descriptions found here. (Did this to
-- avoid massive cut-and-paste which later leads to
-- discrepencies and inconsistencies when changes are
-- incorrectly made to the descriptions in one location but
-- not the others).
-- 1.3.6.1.4.1.388.11.2.4.2
ccPortal OBJECT IDENTIFIER ::= { ccRf 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.1
ccPortalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all Portals that have been
adopted or have failed adoption (by this WS2000)."
::= { ccPortal 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1
ccPortalEntry OBJECT-TYPE
SYNTAX CcPortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalTable 1 }
CcPortalEntry ::=
SEQUENCE {
ccPortalIndex
INTEGER,
ccPortalPointerToAp
SinglePointer,
ccPortalPointersToWlans
MultiPointer63,
ccPortalName
DisplayString,
ccPortalLocation
DisplayString,
ccPortalOptions
BITS,
ccPortalMac
PhysAddress,
ccPortalNumberOfEss
Integer32,
ccPortalNumberOfBss
Integer32,
ccPortalAssociatedMus
Integer32,
ccPortalRadioType
RadioType,
ccPortalChannel
INTEGER,
ccPortalTxPowerLevel
Integer32,
ccPortalLastAdoption
TimeTicks,
ccPortalState
INTEGER,
ccPortalBackgroundNoiseNumSamples
Counter32,
ccPortalBackgroundNoiseBest
Integer32,
ccPortalBackgroundNoiseWorst
Integer32,
ccPortalBackgroundNoiseSum
Integer32,
ccPortalBackgroundNoiseSumSquares
Counter64
}
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.1
ccPortalIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Small, arbitrary integer index."
::= { ccPortalEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.2
ccPortalPointerToAp OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is the index in the ApTable for the
entry representing the Access Port that contains
this Portal.
Since each Portal has one and only one Access Port
as 'parent', this value is a simple integer, not a
bit-mask."
::= { ccPortalEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.3
ccPortalPointersToWlans OBJECT-TYPE
SYNTAX MultiPointer63
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(Reserved for future implementation)."
::= { ccPortalEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.4
ccPortalName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of this Portal, as assigned by the Web UI
or CLI."
::= { ccPortalEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.5
ccPortalLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Location string for this Portal, as assigned by
the Web UI or CLI."
::= { ccPortalEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.6
ccPortalOptions OBJECT-TYPE
SYNTAX BITS
{
undefined00(0),
undefined01(1),
undefined02(2),
undefined03(3),
undefined04(4),
undefined05(5),
undefined06(6),
undefined07(7),
undefined08(8),
undefined09(9),
undefined10(10),
undefined11(11),
externalSecondaryAntInstalled(12),
internalSecondaryAntInstalled(13),
externalPrimaryAntInstalled(14),
internalPrimaryAntInstalled(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value describes the presence/absence of
internal and/or external primary and/or secondary
antennas."
::= { ccPortalEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.7
ccPortalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the Portal."
::= { ccPortalEntry 7 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.8
ccPortalNumberOfEss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ESSs implemented by this Portal."
::= { ccPortalEntry 8 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.9
ccPortalNumberOfBss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BSSs implemented by this Portal."
::= { ccPortalEntry 9 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.10
ccPortalAssociatedMus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MUs currently associated to this
Portal."
::= { ccPortalEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.11
ccPortalRadioType OBJECT-TYPE
SYNTAX RadioType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio type of the Portal."
::= { ccPortalEntry 11 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.12
ccPortalChannel OBJECT-TYPE
SYNTAX INTEGER
{
ieee802dot11bChannel01(1),
ieee802dot11bChannel02(2),
ieee802dot11bChannel03(3),
ieee802dot11bChannel04(4),
ieee802dot11bChannel05(5),
ieee802dot11bChannel06(6),
ieee802dot11bChannel07(7),
ieee802dot11bChannel08(8),
ieee802dot11bChannel09(9),
ieee802dot11bChannel10(10),
ieee802dot11bChannel11(11),
ieee802dot11bChannel12(12),
ieee802dot11bChannel13(13),
ieee802dot11bChannel14(14),
ieee802dot11aChannel036(36),
ieee802dot11aChannel040(40),
ieee802dot11aChannel044(44),
ieee802dot11aChannel048(48),
ieee802dot11aChannel052(52),
ieee802dot11aChannel056(56),
ieee802dot11aChannel060(60),
ieee802dot11aChannel064(64),
ieee802dot11aChannel149(149),
ieee802dot11aChannel153(153),
ieee802dot11aChannel157(157),
ieee802dot11aChannel161(161)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value describes the channel the Portal is
currently operating on.
"
::= { ccPortalEntry 12 }
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.13
ccPortalTxPowerLevel OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "milli-Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output power level for the Portal.
"
::= { ccPortalEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.14
ccPortalLastAdoption OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the WS2000's sysUpTime when this
Portal was last adopted."
::= { ccPortalEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.15
ccPortalState OBJECT-TYPE
SYNTAX INTEGER
{
portalUpAndWaitingForConfig(1),
portalReceivingConfig(2),
portalUpAndAdopted(3),
portalDeniedAdoptionDueToAcl(4),
portalBroken(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value describes the state of the Portal.
A healthy Portal would power-on, and quickly advance from
portalUpAndWaitingForConfig and then on to
portalReceivingConfig and then on to
portalUpAndAdopted.
A Portal that is denied adoption due to ACLs would show:
portalDeniedAdoptionDueToAcl.
A Portal that does not 'handshake' with the switch properly
would be found in state:
portalBroken."
::= { ccPortalEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.16
ccPortalBackgroundNoiseNumSamples OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total packets received via the Portal included in
all the other counters reported in this row."
::= { ccPortalEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.17
ccPortalBackgroundNoiseBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen from the Portal so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to 500dBm.
"
::= { ccPortalEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.18
ccPortalBackgroundNoiseWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Signal value seen from the Portal so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to -500dBm.
"
::= { ccPortalEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.19
ccPortalBackgroundNoiseSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets
received via this Portal.
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal.
(This value divided by ccPortalRxRssiNumPkts yields
the average Signal value for all packets received
from this Portal)."
::= { ccPortalEntry 19 }
-- 1.3.6.1.4.1.388.11.2.4.2.1.1.20
ccPortalBackgroundNoiseSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Signal value calculated
for packets received via this Portal.
Unlike _SignalSum, this value is never negative, since
the square of a negative number is a positive.
(This value can be used to calculate the standard
deviation for Signal values calculated for packets
from this Portal)."
::= { ccPortalEntry 20 }
-- 1.3.6.1.4.1.388.11.2.4.2.2
ccPortalLastMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar records the MAC address of the most
recent Portal to be Adopted, UnAdopted, or Denied."
::= { ccPortal 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.3
ccPortalLastReason OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
aclViolation(2),
timeout(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value notes the reason for the most-recent
Portal UnAdoption or Denial."
::= { ccPortal 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.4
ccPortalAdoptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalAdoptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table describing which WLANs are eligible to adopt a
new portal.
The illegal MAC address value of 'FF:FF:FF:FF:FF:FF'
is used in both _StartMac and _EndMac fields to
indicate the special row used to declare 'default'
behavior. That is, if no other row in the
table applies, which WLANs are eligible to adopt the
portal.
This one special row cannot be deleted."
::= { ccPortal 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.4.1
ccPortalAdoptionEntry OBJECT-TYPE
SYNTAX CcPortalAdoptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalAdoptionIndex }
::= { ccPortalAdoptionTable 1 }
CcPortalAdoptionEntry ::=
SEQUENCE {
ccPortalAdoptionIndex
Integer32,
ccPortalAdoptionStartMac
PhysAddress,
ccPortalAdoptionEndMac
PhysAddress,
ccPortalAdoptionWlanPointers
SinglePointer,
ccPortalAdoptionRowStatus
AbbrevRowStatus
}
-- Simple index.
--
-- ??- it appears that 'start MAC' is not required in
-- the UI to be unique, so it would not suffice as the
-- index.
-- 1.3.6.1.4.1.388.11.2.4.2.4.1.1
ccPortalAdoptionIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Table that describes which portals can be adopted by
which WLANs."
::= { ccPortalAdoptionEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.4.1.2
ccPortalAdoptionStartMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting MAC address of range of MAC addresses."
::= { ccPortalAdoptionEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.4.1.3
ccPortalAdoptionEndMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ending MAC address of range of MAC addresses."
::= { ccPortalAdoptionEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.4.1.4
ccPortalAdoptionWlanPointers OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pointer to zero or more WLANs which are eligible
to adopt portals whose MAC address falls within the
specified range.
Any WLAN selected by this value must first be removed
from the 'default' row first.
Note that to make an adoption rule apply to more
than one WLAN, you must create multiple rows in
this table. (This is due to the way the adoption
rules are stored inside the switch).
"
::= { ccPortalAdoptionEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.4.1.5
ccPortalAdoptionRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Simple row status."
::= { ccPortalAdoptionEntry 5 }
-- ??-TW: all the stats in this table are reported in WISP
-- 'Status' messages reported from the Portal to the switch
-- every 5sec. Note that these are counters newly added to
-- the Portals. In each case, they are cumulative counters,
-- (since Portal reset), so the swith should NOT add them up.
-- 1.3.6.1.4.1.388.11.2.4.2.5
ccPortalSystemStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSystemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes statistics for 802.11 system packets
transmitted/received at each Portal."
::= { ccPortal 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1
ccPortalSystemStatsEntry OBJECT-TYPE
SYNTAX CcPortalSystemStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalSystemStatsTable 1 }
CcPortalSystemStatsEntry ::=
SEQUENCE {
ccPortalSystemStatsBeaconsTx
Unsigned32,
ccPortalSystemStatsBeaconsTxOctets
Unsigned32,
ccPortalSystemStatsProbeReqRx
Unsigned32,
ccPortalSystemStatsProbeReqRxOctets
Unsigned32,
ccPortalSystemStatsProbeRespRetriesNone
Unsigned32,
ccPortalSystemStatsProbeRespRetries1
Unsigned32,
ccPortalSystemStatsProbeRespRetries2
Unsigned32,
ccPortalSystemStatsProbeRespRetries3OrMore
Unsigned32,
ccPortalSystemStatsProbeRespRetriesFailed
Unsigned32,
ccPortalSystemStatsProbeRespTxOctets
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.1
ccPortalSystemStatsBeaconsTx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Beacons sent."
::= { ccPortalSystemStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.2
ccPortalSystemStatsBeaconsTxOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent in Beacons."
::= { ccPortalSystemStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.3
ccPortalSystemStatsProbeReqRx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Request packets received."
::= { ccPortalSystemStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.4
ccPortalSystemStatsProbeReqRxOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received in Probe Request packets."
::= { ccPortalSystemStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.5
ccPortalSystemStatsProbeRespRetriesNone OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Response packets sent with no retries."
::= { ccPortalSystemStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.6
ccPortalSystemStatsProbeRespRetries1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Response packets sent with exactly
1 retry."
::= { ccPortalSystemStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.7
ccPortalSystemStatsProbeRespRetries2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Response packets sent with exactly
2 retries."
::= { ccPortalSystemStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.8
ccPortalSystemStatsProbeRespRetries3OrMore OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Response packets sent with exactly
3 retries or more retries.
"
::= { ccPortalSystemStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.9
ccPortalSystemStatsProbeRespRetriesFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Probe Response packets that were never
successfully transmitted because the max retry count was
reached."
::= { ccPortalSystemStatsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.5.1.10
ccPortalSystemStatsProbeRespTxOctets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets successfully transmitted in Probe
Response packets. (For example, the octets in a Probe
Response that is transmitted twice - one retry - only
counts once in this sum)."
::= { ccPortalSystemStatsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.6
ccPortalSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Use ccPortalSettingsTable to view and set the properties of
the Access Ports.
"
::= { ccPortal 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1
ccPortalSettingsEntry OBJECT-TYPE
SYNTAX CcPortalSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalSettingsTable 1 }
CcPortalSettingsEntry ::=
SEQUENCE {
ccPortalSettingsName
DisplayString,
ccPortalSettingsLocation
DisplayString,
ccPortalSettingsAntenna
INTEGER,
ccPortalSettingsShortPreamble
TruthValue,
ccPortalSettingsUniSpread
TruthValue,
ccPortalSettingsRtsThresh
Integer32,
ccPortalSettingsBeaconInt
Integer32,
ccPortalSettingsDtimPrd
Integer32,
ccPortalSettingsSecBeacon
TruthValue,
ccPortalSettingsPriWlan
SinglePointer,
ccPortalSettingsBasicRates
TransmitRate,
ccPortalSettingsSupportedRates
TransmitRate,
ccPortalSettingsBGMode
INTEGER,
ccPortalSettingsAdoptedWlan
MultiPointer63,
ccPortalSettingsDetector
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.1
ccPortalSettingsName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of Access Port."
::= { ccPortalSettingsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.2
ccPortalSettingsLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Site location of Access Port."
::= { ccPortalSettingsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.3
ccPortalSettingsAntenna OBJECT-TYPE
SYNTAX INTEGER
{
fullDiversity(1),
primaryOnly(2),
secondaryOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The antenna diversity setting for the access port."
::= { ccPortalSettingsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.4
ccPortalSettingsShortPreamble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable support for Short Preamble when MUs
associate with the Access Port. Enabling Short
Preamble may cause incompatibility with some older
clients."
::= { ccPortalSettingsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.5
ccPortalSettingsUniSpread OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Eable the Uniform Spreading feature of the AP300.
To comply with Dynamic Frequency Selection(DFS)
requirements in the European Union, the 802.11a
radio on AP300 Access Ports will come up on a random
channel each time it is powered on."
::= { ccPortalSettingsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.6
ccPortalSettingsRtsThresh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Request To Send(RTS) threshold(in bytes) for use
by the WLAN's adopted Access Port."
::= { ccPortalSettingsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.7
ccPortalSettingsBeaconInt OBJECT-TYPE
SYNTAX Integer32 (50..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a beacon interval in units of 1,000
microseconds (K-us). This is a multiple of the DTIM
(ccPortalCfgDefaultADtimPrd) value, for example,
100 : 10. "
::= { ccPortalSettingsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.8
ccPortalSettingsDtimPrd OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a period for the Delivery Traffic Indication
Message (DTIM). This is a divisor of the beacon
interval (in milliseconds), for example, 10 : 100. "
::= { ccPortalSettingsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.9
ccPortalSettingsSecBeacon OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Secure Beacon checkbox to disallow the
Access Port from broadcasting an ESSID in its
beacons. This is a safeguard to prevent intruders
from tapping into the WLAN. Consider this security
measure for a private, corporate network."
::= { ccPortalSettingsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.10
ccPortalSettingsPriWlan OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Associate a primary WLAN with the Access Port for
broadcast of the Extended Service Set Identification
(ESSID). The purpose of such broadcasting is to allow
mobile units to identify Access Ports that are
associated with the WLAN."
::= { ccPortalSettingsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.11
ccPortalSettingsBasicRates OBJECT-TYPE
SYNTAX TransmitRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of basic rates for the radio."
::= { ccPortalSettingsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.12
ccPortalSettingsSupportedRates OBJECT-TYPE
SYNTAX TransmitRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of supported rates for the radio."
::= { ccPortalSettingsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.13
ccPortalSettingsBGMode OBJECT-TYPE
SYNTAX INTEGER
{
modeBandG(1),
modeG(2),
modeB(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio mode."
::= { ccPortalSettingsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.14
ccPortalSettingsAdoptedWlan OBJECT-TYPE
SYNTAX MultiPointer63
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable the bits for the WLANs you wish to associate the
Access Port with."
::= { ccPortalSettingsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.6.1.15
ccPortalSettingsDetector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ccPortalSettingsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.7
ccPortalCfgRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Use ccPortalCfgRadioTable to view and set the radio
properties of the Access Ports.
The process can be broken down into the following steps:
1. Set ccPortalCfgRadioReset to TRUE.
2. Set ccPortalCfgRadioDesPlacement
3. Get ccPortalCfgRadioPosChannel
4. Set ccPortalCfgRadioDesChannel
5. Get ccPortalCfgRadioPosPowerLevel
6. Set ccPortalCfgRadioDesPowerLevel
7. Get ccPortalCfgRadioPowerInMW
8. Set and pull progress of ccPortalCfgRadioSet
9. Validate the configuration has been set by getting
ccPortalCfgRadioPlacement
ccPortalCfgRadioChannel
ccPortalCfgRadioPowerLevel
"
::= { ccPortal 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1
ccPortalCfgRadioEntry OBJECT-TYPE
SYNTAX CcPortalCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalCfgRadioTable 1 }
CcPortalCfgRadioEntry ::=
SEQUENCE {
ccPortalCfgRadioDesPlacement
INTEGER,
ccPortalCfgRadioPosChannel
BITS,
ccPortalCfgRadioDesChannel
INTEGER,
ccPortalCfgRadioPosPowerLevel
Integer32,
ccPortalCfgRadioDesPowerLevel
Integer32,
ccPortalCfgRadioDesPowerInMW
Integer32,
ccPortalCfgRadioSet
DoActionShowProgress,
ccPortalCfgRadioReset
DoActionShowProgress,
ccPortalCfgRadioPlacement
INTEGER,
ccPortalCfgRadioChannel
INTEGER,
ccPortalCfgRadioPowerLevel
Unsigned32,
ccPortalCfgRadioPowerInMW
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.1
ccPortalCfgRadioDesPlacement OBJECT-TYPE
SYNTAX INTEGER
{
indoor(1),
outdoor(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired placement for radio."
::= { ccPortalCfgRadioEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.2
ccPortalCfgRadioPosChannel OBJECT-TYPE
SYNTAX BITS
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(12),
achannel40(13),
achannel44(14),
achannel48(15),
achannel52(16),
achannel56(17),
achannel60(18),
achannel64(19),
achannel149(20),
achannel153(21),
achannel157(22),
achannel161(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The possible channels that can be set when placement =
ccPortalCfgRadioDesPlacement."
::= { ccPortalCfgRadioEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.3
ccPortalCfgRadioDesChannel OBJECT-TYPE
SYNTAX INTEGER
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(36),
achannel40(40),
achannel44(44),
achannel48(48),
achannel52(52),
achannel56(56),
achannel60(60),
achannel64(64),
achannel149(149),
achannel153(153),
achannel157(157),
achannel161(161)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired channel for radio."
::= { ccPortalCfgRadioEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.4
ccPortalCfgRadioPosPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max possible power level (dBm) that can be set when
channel= ccPortalCfgRadioDesChannel."
::= { ccPortalCfgRadioEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.5
ccPortalCfgRadioDesPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired power level (dBm) for radio."
::= { ccPortalCfgRadioEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.6
ccPortalCfgRadioDesPowerInMW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ccPortalCfgRadioDesPowerLevel in mW."
::= { ccPortalCfgRadioEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.7
ccPortalCfgRadioSet OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate values in ccPortalCfgRadioDes_ fields. If it is
a valid combination, configure the switch with this
combination and set ccPortalCfgRadio_ to these values."
::= { ccPortalCfgRadioEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.8
ccPortalCfgRadioReset OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the following OIDs.
ccPortalCfgRadioDesPlacement
ccPortalCfgRadioDesChannel
ccPortalCfgRadioDesPowerLevel
ccPortalCfgRadioPosChannel
ccPortalCfgRadioPosPowerLevel
ccPortalCfgRadioPowerInMW
"
::= { ccPortalCfgRadioEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.9
ccPortalCfgRadioPlacement OBJECT-TYPE
SYNTAX INTEGER
{
indoor(1),
outdoor(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The placement configuration for radio."
::= { ccPortalCfgRadioEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.10
ccPortalCfgRadioChannel OBJECT-TYPE
SYNTAX INTEGER
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(36),
achannel40(40),
achannel44(44),
achannel48(48),
achannel52(52),
achannel56(56),
achannel60(60),
achannel64(64),
achannel149(149),
achannel153(153),
achannel157(157),
achannel161(161)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel configuration for radio."
::= { ccPortalCfgRadioEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.11
ccPortalCfgRadioPowerLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power level (dBm) configuration for radio."
::= { ccPortalCfgRadioEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.7.1.12
ccPortalCfgRadioPowerInMW OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ccPortalCfgRadioPowerLevel in mW."
::= { ccPortalCfgRadioEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.8
ccPortalSettingsDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSettingsDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ccPortalSettingsDefaultsTable contains the initial
settings for the Access Ports.
"
::= { ccPortal 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1
ccPortalSettingsDefaultEntry OBJECT-TYPE
SYNTAX CcPortalSettingsDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalSettingsDefaultIndex }
::= { ccPortalSettingsDefaultTable 1 }
CcPortalSettingsDefaultEntry ::=
SEQUENCE {
ccPortalSettingsDefaultIndex
INTEGER,
ccPortalSettingsDefaultAntenna
INTEGER,
ccPortalSettingsDefaultShortPreamble
TruthValue,
ccPortalSettingsDefaultUniSpread
TruthValue,
ccPortalSettingsDefaultRtsThresh
Integer32,
ccPortalSettingsDefaultBeaconInt
Integer32,
ccPortalSettingsDefaultDtimPrd
Integer32,
ccPortalSettingsDefaultSecBeacon
TruthValue,
ccPortalSettingsDefaultPriWlan
SinglePointer,
ccPortalSettingsDefaultBasicRates
TransmitRate,
ccPortalSettingsDefaultSupportedRates
TransmitRate,
ccPortalSettingsDefaultBGMode
INTEGER
}
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.1
ccPortalSettingsDefaultIndex OBJECT-TYPE
SYNTAX INTEGER
{
radioA(1),
radioB(2),
radioG(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of the radio"
::= { ccPortalSettingsDefaultEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.2
ccPortalSettingsDefaultAntenna OBJECT-TYPE
SYNTAX INTEGER
{
fullDiversity(1),
primaryOnly(2),
secondaryOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The antenna diversity setting for the access port."
::= { ccPortalSettingsDefaultEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.3
ccPortalSettingsDefaultShortPreamble OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable support for Short Preamble when MUs
associate with the Access Port. Enabling Short
Preamble may cause incompatibility with some older
clients."
::= { ccPortalSettingsDefaultEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.4
ccPortalSettingsDefaultUniSpread OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Eable the Uniform Spreading feature of the AP300.
To comply with Dynamic Frequency Selection(DFS)
requirements in the European Union, the 802.11a
radio on AP300 Access Ports will come up on a random
channel each time it is powered on."
::= { ccPortalSettingsDefaultEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.5
ccPortalSettingsDefaultRtsThresh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Request To Send(RTS) threshold(in bytes) for use
by the WLAN's adopted Access Port."
::= { ccPortalSettingsDefaultEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.6
ccPortalSettingsDefaultBeaconInt OBJECT-TYPE
SYNTAX Integer32 (50..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a beacon interval in units of 1,000
microseconds (K-us). This is a multiple of the DTIM
(ccPortalCfgDefaultADtimPrd) value, for example,
100 : 10. "
::= { ccPortalSettingsDefaultEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.7
ccPortalSettingsDefaultDtimPrd OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a period for the Delivery Traffic Indication
Message (DTIM). This is a divisor of the beacon
interval (in milliseconds), for example, 10 : 100. "
::= { ccPortalSettingsDefaultEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.8
ccPortalSettingsDefaultSecBeacon OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Secure Beacon checkbox to disallow the
Access Port from broadcasting an ESSID in its
beacons. This is a safeguard to prevent intruders
from tapping into the WLAN. Consider this security
measure for a private, corporate network."
::= { ccPortalSettingsDefaultEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.9
ccPortalSettingsDefaultPriWlan OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Associate a primary WLAN with the Access Port for
broadcast of the Extended Service Set Identification
(ESSID). The purpose of such broadcasting is to allow
mobile units to identify Access Ports that are
associated with the WLAN."
::= { ccPortalSettingsDefaultEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.10
ccPortalSettingsDefaultBasicRates OBJECT-TYPE
SYNTAX TransmitRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of basic rates for the radio."
::= { ccPortalSettingsDefaultEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.11
ccPortalSettingsDefaultSupportedRates OBJECT-TYPE
SYNTAX TransmitRate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of supported rates for the radio."
::= { ccPortalSettingsDefaultEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.8.1.12
ccPortalSettingsDefaultBGMode OBJECT-TYPE
SYNTAX INTEGER
{
modeBandG(1),
modeG(2),
modeB(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio mode."
::= { ccPortalSettingsDefaultEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.9
ccPortalCfgRadioDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalCfgRadioDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ccPortalCfgRadioDefaultTable contains the initial
settings for the radio settings of the Access Ports.
Please refer to descriptions in ccPortalCfgRadioTable.
"
::= { ccPortal 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1
ccPortalCfgRadioDefaultEntry OBJECT-TYPE
SYNTAX CcPortalCfgRadioDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalSettingsDefaultIndex }
::= { ccPortalCfgRadioDefaultTable 1 }
CcPortalCfgRadioDefaultEntry ::=
SEQUENCE {
ccPortalCfgRadioDefaultDesPlacement
INTEGER,
ccPortalCfgRadioDefaultPosChannel
BITS,
ccPortalCfgRadioDefaultDesChannel
INTEGER,
ccPortalCfgRadioDefaultPosPowerLevel
Integer32,
ccPortalCfgRadioDefaultDesPowerLevel
Integer32,
ccPortalCfgRadioDefaultDesPowerInMW
Integer32,
ccPortalCfgRadioDefaultSet
DoActionShowProgress,
ccPortalCfgRadioDefaultReset
DoActionShowProgress,
ccPortalCfgRadioDefaultPlacement
INTEGER,
ccPortalCfgRadioDefaultChannel
INTEGER,
ccPortalCfgRadioDefaultPowerLevel
Unsigned32,
ccPortalCfgRadioDefaultPowerInMW
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.1
ccPortalCfgRadioDefaultDesPlacement OBJECT-TYPE
SYNTAX INTEGER
{
indoor(1),
outdoor(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default desired placement for radio type."
::= { ccPortalCfgRadioDefaultEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.2
ccPortalCfgRadioDefaultPosChannel OBJECT-TYPE
SYNTAX BITS
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(12),
achannel40(13),
achannel44(14),
achannel48(15),
achannel52(16),
achannel56(17),
achannel60(18),
achannel64(19),
achannel149(20),
achannel153(21),
achannel157(22),
achannel161(23)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The possible channels that can be set when placement =
ccPortalCfgRadioDefaultDesPlacement."
::= { ccPortalCfgRadioDefaultEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.3
ccPortalCfgRadioDefaultDesChannel OBJECT-TYPE
SYNTAX INTEGER
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(36),
achannel40(40),
achannel44(44),
achannel48(48),
achannel52(52),
achannel56(56),
achannel60(60),
achannel64(64),
achannel149(149),
achannel153(153),
achannel157(157),
achannel161(161)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default desired channel for radio type."
::= { ccPortalCfgRadioDefaultEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.4
ccPortalCfgRadioDefaultPosPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max possible power level (dBm) that can be set when
channel= ccPortalCfgRadioDefaultDesChannel."
::= { ccPortalCfgRadioDefaultEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.5
ccPortalCfgRadioDefaultDesPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired power level (dBm) for radio."
::= { ccPortalCfgRadioDefaultEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.6
ccPortalCfgRadioDefaultDesPowerInMW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ccPortalCfgRadioDefaultDesPowerLevel in mW."
::= { ccPortalCfgRadioDefaultEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.7
ccPortalCfgRadioDefaultSet OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate values in ccPortalCfgRadioDefaultDes_ fields. If it is
a valid combination, configure the switch with this
combination and set ccPortalCfgRadioDefault_ to these values."
::= { ccPortalCfgRadioDefaultEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.8
ccPortalCfgRadioDefaultReset OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the following OIDs.
ccPortalCfgRadioDefaultDesPlacement
ccPortalCfgRadioDefaultDesChannel
ccPortalCfgRadioDefaultDesPowerLevel
ccPortalCfgRadioDefaultPosChannel
ccPortalCfgRadioDefaultPosPowerLevel
ccPortalCfgRadioDefaultPowerInMW
"
::= { ccPortalCfgRadioDefaultEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.9
ccPortalCfgRadioDefaultPlacement OBJECT-TYPE
SYNTAX INTEGER
{
indoor(1),
outdoor(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default placement configuration for radio type."
::= { ccPortalCfgRadioDefaultEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.10
ccPortalCfgRadioDefaultChannel OBJECT-TYPE
SYNTAX INTEGER
{
null(0),
bchannel01(1),
bchannel02(2),
bchannel03(3),
bchannel04(4),
bchannel05(5),
bchannel06(6),
bchannel07(7),
bchannel08(8),
bchannel09(9),
bchannel10(10),
bchannel11(11),
achannel36(36),
achannel40(40),
achannel44(44),
achannel48(48),
achannel52(52),
achannel56(56),
achannel60(60),
achannel64(64),
achannel149(149),
achannel153(153),
achannel157(157),
achannel161(161)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default channel configuration for radio type."
::= { ccPortalCfgRadioDefaultEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.11
ccPortalCfgRadioDefaultPowerLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default power level (dBm) configuration for radio type."
::= { ccPortalCfgRadioDefaultEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.9.1.12
ccPortalCfgRadioDefaultPowerInMW OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ccPortalCfgRadioDefaultPowerLevel in mW."
::= { ccPortalCfgRadioDefaultEntry 12 }
-- 802.1x Port Authentication is used to provide
-- security and authentication of all wired clients on
-- a network. The WS 2000 supports 802.1x port
-- authentication for the AP 300 Access Ports connected
-- to it. It uses a username and password for all ports
-- that can be configured from the wireless switch.
-- 1.3.6.1.4.1.388.11.2.4.2.10
cc802dt1xPortAuth OBJECT IDENTIFIER ::= { ccPortal 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.10.1
cc802dt1xPortAuthLogin OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1x Port Authentication username."
::= { cc802dt1xPortAuth 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.10.2
cc802dt1xPortAuthPass OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1x Port Authentication password."
::= { cc802dt1xPortAuth 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.10.3
cc802dt1xPortAuthSetAp300 OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the username and password stored in
cc802dt1xPortAuthLogin and cc802dt1xPortAuthPass
on all AP 300 Access Ports adopted by the switch."
::= { cc802dt1xPortAuth 3 }
-- !!- OID: .100
-- 1.3.6.1.4.1.388.11.2.4.2.100
ccPortalRfSum OBJECT IDENTIFIER ::= { ccPortal 100 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1
ccPortalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes general statistics about
packets sent/recieved via each Portal on the switch."
::= { ccPortalRfSum 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1
ccPortalStatsEntry OBJECT-TYPE
SYNTAX CcPortalStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalStatsTable 1 }
CcPortalStatsEntry ::=
SEQUENCE {
ccPortalTxPktsUcast
Counter32,
ccPortalRxPktsUcast
Counter32,
ccPortalRxPktsNUcast
Counter32,
ccPortalTxOctetsUcast
Counter32,
ccPortalRxOctetsUcast
Counter32,
ccPortalRxOctetsNUcast
Counter32,
ccPortalRxUndecryptablePkts
Counter32,
ccPortalLastActivity
TimeTicks
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.1
ccPortalTxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets sent via the Portal."
::= { ccPortalStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.2
ccPortalRxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets received via the Portal."
::= { ccPortalStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.3
ccPortalRxPktsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
packets received via the Portal."
::= { ccPortalStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.4
ccPortalTxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets sent via the Portal."
::= { ccPortalStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.5
ccPortalRxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets received via the Portal."
::= { ccPortalStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.6
ccPortalRxOctetsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
octets received via the Portal."
::= { ccPortalStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.7
ccPortalRxUndecryptablePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of packets received via the Portal that could
not be decrypted."
::= { ccPortalStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.1.1.8
ccPortalLastActivity OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the switch's sysUpTime at the time
of the last activity (packet sent or received)
via the Portal."
::= { ccPortalStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2
ccPortalRxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on the switch, this table
describes counts of packets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccPortalRfSum 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1
ccPortalRxPktsEntry OBJECT-TYPE
SYNTAX CcPortalRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalRxPktsTable 1 }
CcPortalRxPktsEntry ::=
SEQUENCE {
ccPortalRxPktsAt1Mb
Counter32,
ccPortalRxPktsAt2Mb
Counter32,
ccPortalRxPktsAt5pt5Mb
Counter32,
ccPortalRxPktsAt6Mb
Counter32,
ccPortalRxPktsAt9Mb
Counter32,
ccPortalRxPktsAt11Mb
Counter32,
ccPortalRxPktsAt12Mb
Counter32,
ccPortalRxPktsAt18Mb
Counter32,
ccPortalRxPktsAt22Mb
Counter32,
ccPortalRxPktsAt24Mb
Counter32,
ccPortalRxPktsAt36Mb
Counter32,
ccPortalRxPktsAt48Mb
Counter32,
ccPortalRxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.1
ccPortalRxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 1 Mb."
::= { ccPortalRxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.2
ccPortalRxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 2 Mb."
::= { ccPortalRxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.3
ccPortalRxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 5.5 Mb."
::= { ccPortalRxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.4
ccPortalRxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 6 Mb."
::= { ccPortalRxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.5
ccPortalRxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 9 Mb."
::= { ccPortalRxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.6
ccPortalRxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 11 Mb."
::= { ccPortalRxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.7
ccPortalRxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 12 Mb."
::= { ccPortalRxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.8
ccPortalRxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 18 Mb."
::= { ccPortalRxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.9
ccPortalRxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 22 Mb."
::= { ccPortalRxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.10
ccPortalRxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 24 Mb."
::= { ccPortalRxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.11
ccPortalRxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 36 Mb."
::= { ccPortalRxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.12
ccPortalRxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 48 Mb."
::= { ccPortalRxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.2.1.13
ccPortalRxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received via this Portal at 54 Mb."
::= { ccPortalRxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3
ccPortalTxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on the switch, this table
describes counts of packets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccPortalRfSum 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1
ccPortalTxPktsEntry OBJECT-TYPE
SYNTAX CcPortalTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalTxPktsTable 1 }
CcPortalTxPktsEntry ::=
SEQUENCE {
ccPortalTxPktsAt1Mb
Counter32,
ccPortalTxPktsAt2Mb
Counter32,
ccPortalTxPktsAt5pt5Mb
Counter32,
ccPortalTxPktsAt6Mb
Counter32,
ccPortalTxPktsAt9Mb
Counter32,
ccPortalTxPktsAt11Mb
Counter32,
ccPortalTxPktsAt12Mb
Counter32,
ccPortalTxPktsAt18Mb
Counter32,
ccPortalTxPktsAt22Mb
Counter32,
ccPortalTxPktsAt24Mb
Counter32,
ccPortalTxPktsAt36Mb
Counter32,
ccPortalTxPktsAt48Mb
Counter32,
ccPortalTxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.1
ccPortalTxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 1 Mb."
::= { ccPortalTxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.2
ccPortalTxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 2 Mb."
::= { ccPortalTxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.3
ccPortalTxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 5.5 Mb."
::= { ccPortalTxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.4
ccPortalTxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 6 Mb."
::= { ccPortalTxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.5
ccPortalTxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 9 Mb."
::= { ccPortalTxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.6
ccPortalTxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 11 Mb."
::= { ccPortalTxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.7
ccPortalTxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 12 Mb."
::= { ccPortalTxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.8
ccPortalTxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 18 Mb."
::= { ccPortalTxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.9
ccPortalTxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 22 Mb."
::= { ccPortalTxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.10
ccPortalTxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 24 Mb."
::= { ccPortalTxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.11
ccPortalTxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 36 Mb."
::= { ccPortalTxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.12
ccPortalTxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 48 Mb."
::= { ccPortalTxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.3.1.13
ccPortalTxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted via this Portal at 54 Mb."
::= { ccPortalTxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4
ccPortalRxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on this switch, this table
describes counts of octets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccPortalRfSum 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1
ccPortalRxOctetsEntry OBJECT-TYPE
SYNTAX CcPortalRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalRxOctetsTable 1 }
CcPortalRxOctetsEntry ::=
SEQUENCE {
ccPortalRxOctetsAt1Mb
Counter32,
ccPortalRxOctetsAt2Mb
Counter32,
ccPortalRxOctetsAt5pt5Mb
Counter32,
ccPortalRxOctetsAt6Mb
Counter32,
ccPortalRxOctetsAt9Mb
Counter32,
ccPortalRxOctetsAt11Mb
Counter32,
ccPortalRxOctetsAt12Mb
Counter32,
ccPortalRxOctetsAt18Mb
Counter32,
ccPortalRxOctetsAt22Mb
Counter32,
ccPortalRxOctetsAt24Mb
Counter32,
ccPortalRxOctetsAt36Mb
Counter32,
ccPortalRxOctetsAt48Mb
Counter32,
ccPortalRxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.1
ccPortalRxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 1 Mb."
::= { ccPortalRxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.2
ccPortalRxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 2 Mb."
::= { ccPortalRxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.3
ccPortalRxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 5.5 Mb."
::= { ccPortalRxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.4
ccPortalRxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 6 Mb."
::= { ccPortalRxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.5
ccPortalRxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 9 Mb."
::= { ccPortalRxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.6
ccPortalRxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 11 Mb."
::= { ccPortalRxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.7
ccPortalRxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 12 Mb."
::= { ccPortalRxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.8
ccPortalRxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 18 Mb."
::= { ccPortalRxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.9
ccPortalRxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 22 Mb."
::= { ccPortalRxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.10
ccPortalRxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 24 Mb."
::= { ccPortalRxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.11
ccPortalRxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 36 Mb."
::= { ccPortalRxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.12
ccPortalRxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 48 Mb."
::= { ccPortalRxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.4.1.13
ccPortalRxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received via this Portal at 54 Mb."
::= { ccPortalRxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5
ccPortalTxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on this switch, this table
describes counts of octets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccPortalRfSum 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1
ccPortalTxOctetsEntry OBJECT-TYPE
SYNTAX CcPortalTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalTxOctetsTable 1 }
CcPortalTxOctetsEntry ::=
SEQUENCE {
ccPortalTxOctetsAt1Mb
Counter32,
ccPortalTxOctetsAt2Mb
Counter32,
ccPortalTxOctetsAt5pt5Mb
Counter32,
ccPortalTxOctetsAt6Mb
Counter32,
ccPortalTxOctetsAt9Mb
Counter32,
ccPortalTxOctetsAt11Mb
Counter32,
ccPortalTxOctetsAt12Mb
Counter32,
ccPortalTxOctetsAt18Mb
Counter32,
ccPortalTxOctetsAt22Mb
Counter32,
ccPortalTxOctetsAt24Mb
Counter32,
ccPortalTxOctetsAt36Mb
Counter32,
ccPortalTxOctetsAt48Mb
Counter32,
ccPortalTxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.1
ccPortalTxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 1 Mb."
::= { ccPortalTxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.2
ccPortalTxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 2 Mb."
::= { ccPortalTxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.3
ccPortalTxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 5.5 Mb."
::= { ccPortalTxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.4
ccPortalTxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 6 Mb."
::= { ccPortalTxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.5
ccPortalTxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 9 Mb."
::= { ccPortalTxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.6
ccPortalTxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 11 Mb."
::= { ccPortalTxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.7
ccPortalTxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 12 Mb."
::= { ccPortalTxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.8
ccPortalTxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 18 Mb."
::= { ccPortalTxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.9
ccPortalTxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 22 Mb."
::= { ccPortalTxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.10
ccPortalTxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 24 Mb."
::= { ccPortalTxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.11
ccPortalTxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 36 Mb."
::= { ccPortalTxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.12
ccPortalTxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 48 Mb."
::= { ccPortalTxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.5.1.13
ccPortalTxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number octets transmitted via this Portal at 54 Mb."
::= { ccPortalTxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6
ccPortalTxRetriesPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalTxRetriesPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on the switch, this table describes
counts of the number of packets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccPortalRfSum 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1
ccPortalTxRetriesPktsEntry OBJECT-TYPE
SYNTAX CcPortalTxRetriesPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalTxRetriesPktsTable 1 }
CcPortalTxRetriesPktsEntry ::=
SEQUENCE {
ccPortalTxRetriesPktsNone
Counter32,
ccPortalTxRetriesPkts01
Counter32,
ccPortalTxRetriesPkts02
Counter32,
ccPortalTxRetriesPkts03
Counter32,
ccPortalTxRetriesPkts04
Counter32,
ccPortalTxRetriesPkts05
Counter32,
ccPortalTxRetriesPkts06
Counter32,
ccPortalTxRetriesPkts07
Counter32,
ccPortalTxRetriesPkts08
Counter32,
ccPortalTxRetriesPkts09
Counter32,
ccPortalTxRetriesPkts10
Counter32,
ccPortalTxRetriesPkts11
Counter32,
ccPortalTxRetriesPkts12
Counter32,
ccPortalTxRetriesPkts13
Counter32,
ccPortalTxRetriesPkts14
Counter32,
ccPortalTxRetriesPkts15
Counter32,
ccPortalTxRetriesPktsFailed
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.1
ccPortalTxRetriesPktsNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with no retries."
::= { ccPortalTxRetriesPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.2
ccPortalTxRetriesPkts01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 1 retry."
::= { ccPortalTxRetriesPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.3
ccPortalTxRetriesPkts02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 2 retries."
::= { ccPortalTxRetriesPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.4
ccPortalTxRetriesPkts03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 3 retries."
::= { ccPortalTxRetriesPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.5
ccPortalTxRetriesPkts04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 4 retries."
::= { ccPortalTxRetriesPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.6
ccPortalTxRetriesPkts05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 5 retries."
::= { ccPortalTxRetriesPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.7
ccPortalTxRetriesPkts06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 6 retries."
::= { ccPortalTxRetriesPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.8
ccPortalTxRetriesPkts07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 7 retries."
::= { ccPortalTxRetriesPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.9
ccPortalTxRetriesPkts08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 8 retries."
::= { ccPortalTxRetriesPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.10
ccPortalTxRetriesPkts09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 9 retries."
::= { ccPortalTxRetriesPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.11
ccPortalTxRetriesPkts10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 10 retries."
::= { ccPortalTxRetriesPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.12
ccPortalTxRetriesPkts11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 11 retries."
::= { ccPortalTxRetriesPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.13
ccPortalTxRetriesPkts12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 12 retries."
::= { ccPortalTxRetriesPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.14
ccPortalTxRetriesPkts13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 13 retries."
::= { ccPortalTxRetriesPktsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.15
ccPortalTxRetriesPkts14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 14 retries."
::= { ccPortalTxRetriesPktsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.16
ccPortalTxRetriesPkts15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted via this
Portal with exactly 15 retries."
::= { ccPortalTxRetriesPktsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.6.1.17
ccPortalTxRetriesPktsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts that never were successfully
transmitted to via this Portal because the max retry
count was exceeded."
::= { ccPortalTxRetriesPktsEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7
ccPortalTxRetriesOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each Portal on the switch, this table describes
counts of the number of octets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccPortalRfSum 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1
ccPortalTxRetriesOctetsEntry OBJECT-TYPE
SYNTAX CcPortalTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalTxRetriesOctetsTable 1 }
CcPortalTxRetriesOctetsEntry ::=
SEQUENCE {
ccPortalTxRetriesOctetsNone
Counter32,
ccPortalTxRetriesOctets01
Counter32,
ccPortalTxRetriesOctets02
Counter32,
ccPortalTxRetriesOctets03
Counter32,
ccPortalTxRetriesOctets04
Counter32,
ccPortalTxRetriesOctets05
Counter32,
ccPortalTxRetriesOctets06
Counter32,
ccPortalTxRetriesOctets07
Counter32,
ccPortalTxRetriesOctets08
Counter32,
ccPortalTxRetriesOctets09
Counter32,
ccPortalTxRetriesOctets10
Counter32,
ccPortalTxRetriesOctets11
Counter32,
ccPortalTxRetriesOctets12
Counter32,
ccPortalTxRetriesOctets13
Counter32,
ccPortalTxRetriesOctets14
Counter32,
ccPortalTxRetriesOctets15
Counter32,
ccPortalTxRetriesOctetsFailed
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.1
ccPortalTxRetriesOctetsNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with no retries."
::= { ccPortalTxRetriesOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.2
ccPortalTxRetriesOctets01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 1 retry."
::= { ccPortalTxRetriesOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.3
ccPortalTxRetriesOctets02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 2 retries."
::= { ccPortalTxRetriesOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.4
ccPortalTxRetriesOctets03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 3 retries."
::= { ccPortalTxRetriesOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.5
ccPortalTxRetriesOctets04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 4 retries."
::= { ccPortalTxRetriesOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.6
ccPortalTxRetriesOctets05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 5 retries."
::= { ccPortalTxRetriesOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.7
ccPortalTxRetriesOctets06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 6 retries."
::= { ccPortalTxRetriesOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.8
ccPortalTxRetriesOctets07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 7 retries."
::= { ccPortalTxRetriesOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.9
ccPortalTxRetriesOctets08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 8 retries."
::= { ccPortalTxRetriesOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.10
ccPortalTxRetriesOctets09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 9 retries."
::= { ccPortalTxRetriesOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.11
ccPortalTxRetriesOctets10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 10 retries."
::= { ccPortalTxRetriesOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.12
ccPortalTxRetriesOctets11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 11 retries."
::= { ccPortalTxRetriesOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.13
ccPortalTxRetriesOctets12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 12 retries."
::= { ccPortalTxRetriesOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.14
ccPortalTxRetriesOctets13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 13 retries."
::= { ccPortalTxRetriesOctetsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.15
ccPortalTxRetriesOctets14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 14 retries."
::= { ccPortalTxRetriesOctetsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.16
ccPortalTxRetriesOctets15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted via this
Portal with exactly 15 retries."
::= { ccPortalTxRetriesOctetsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.7.1.17
ccPortalTxRetriesOctetsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets that never were successfully
transmitted to via this Portal because the max retry
count was exceeded."
::= { ccPortalTxRetriesOctetsEntry 17 }
-- ??-TW: Note that these values have been split-out from the
-- _StatsTable for Portal/MU/WLAN. The resulting new tables
-- _SigStatsTable for Portal/MU/WLAN are symmetrical, but they
-- have been added before other v1.5 tables, and so have
-- caused their location to move.
--
-- Also, note that the four RSSI values still remain in the
-- ccMuStats table, since to delete them would be an
-- inconsistant change. For symmetry, they have been
-- duplicated.
-- 1.3.6.1.4.1.388.11.2.4.2.100.8
ccPortalSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes statistics about RSSI, Signal, Noise,
and SNR for packets recieved via each Portal on the switch."
::= { ccPortalRfSum 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1
ccPortalSigStatsEntry OBJECT-TYPE
SYNTAX CcPortalSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalSigStatsTable 1 }
CcPortalSigStatsEntry ::=
SEQUENCE {
ccPortalSigStatsNumPkts
Counter32,
ccPortalSigStatsSignalBest
Integer32,
ccPortalSigStatsSignalWorst
Integer32,
ccPortalSigStatsSignalSum
Integer32,
ccPortalSigStatsSignalSumSquares
Counter64,
ccPortalSigStatsSignalMostRecent
Integer32,
ccPortalSigStatsNoiseBest
Integer32,
ccPortalSigStatsNoiseWorst
Integer32,
ccPortalSigStatsNoiseSum
Integer32,
ccPortalSigStatsNoiseSumSquares
Counter64,
ccPortalSigStatsNoiseMostRecent
Integer32,
ccPortalSigStatsSnrBest
Integer32,
ccPortalSigStatsSnrWorst
Integer32,
ccPortalSigStatsSnrSum
Integer32,
ccPortalSigStatsSnrSumSquares
Counter64,
ccPortalSigStatsSnrMostRecent
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.1
ccPortalSigStatsNumPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total packets received via the Portal included in
all the other counters reported in this row."
::= { ccPortalSigStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.2
ccPortalSigStatsSignalBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen from the Portal so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to -500dBm.
"
::= { ccPortalSigStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.3
ccPortalSigStatsSignalWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Signal value seen from the Portal so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to 500dBm."
::= { ccPortalSigStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.4
ccPortalSigStatsSignalSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets
received via this Portal.
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal.
(This value divided by ccPortalSigStatsNumPkts yields
the average Signal value for all packets received
from this MU)."
::= { ccPortalSigStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.5
ccPortalSigStatsSignalSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Signal value calculated
for packets received via this Portal.
Unlike _SignalSum, this value is never negative, since
the square of a negative number is a positive.
(This value can be used to calculate the standard
deviation for Signal values calculated for packets
from this Portal)."
::= { ccPortalSigStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.6
ccPortalSigStatsSignalMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen from the Portal so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0."
::= { ccPortalSigStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.7
ccPortalSigStatsNoiseBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Noise value seen from the Portal so far.
(Remember that -80dBm Noise is better than -70dBm).
This value is initialized to 500dBm."
::= { ccPortalSigStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.8
ccPortalSigStatsNoiseWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Noise value seen from the Portal so far.
(Remember that -50dBm Noise is worse than -60dBm).
This value is initialized to -500dBm."
::= { ccPortalSigStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.9
ccPortalSigStatsNoiseSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Noise values calculated by the
switch (using reported RSSI values), for packets
received via this Portal.
Like _SignalSum, this value is normally a negative value.
(This value divided by ccPortalSigStatsNumPkts yields
the average Noise value for all packets received
from this MU)."
::= { ccPortalSigStatsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.10
ccPortalSigStatsNoiseSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Noise value calculated
for packets received via this Portal.
As with _SignalSumSquares, this value is never negative.
(This value can be used to calculate the standard
deviation for Noise values calculated for packets
from this Portal)."
::= { ccPortalSigStatsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.11
ccPortalSigStatsNoiseMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Noise value seen from the Portal so far.
(Remember that -80dBm Noise is better than -70dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0."
::= { ccPortalSigStatsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.12
ccPortalSigStatsSnrBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best SNR value seen from the Portal so far.
(Remember that +30dBm SNR is better than +20dBm).
This value is initialized to -500dB."
::= { ccPortalSigStatsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.13
ccPortalSigStatsSnrWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst SNR value seen from the Portal so far.
(Remember that +10dBm SNR is worse than +20dBm).
This value is initialized to 500dB."
::= { ccPortalSigStatsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.14
ccPortalSigStatsSnrSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all SNR values calculated by the
switch (using reported RSSI values), for packets
received via this Portal.
Unlike _Signal and _Noise, this value is never negative.
(This value divided by ccPortalSigStatsNumPkts yields
the average SNR value for all packets received
from this MU)."
::= { ccPortalSigStatsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.15
ccPortalSigStatsSnrSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each SNR value calculated
for packets received via this Portal.
This value is never negative.
(This value can be used to calculate the standard
deviation for SNR values calculated for packets
from this Portal)."
::= { ccPortalSigStatsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.8.1.16
ccPortalSigStatsSnrMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best SNR value seen from the Portal so far.
(Remember that +30dBm SNR is better than +20dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0."
::= { ccPortalSigStatsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9
ccPortalSumStatsShortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the SHORT window for
each Portal."
::= { ccPortalRfSum 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1
ccPortalSumStatsShortEntry OBJECT-TYPE
SYNTAX CcPortalSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalSumStatsShortTable 1 }
CcPortalSumStatsShortEntry ::=
SEQUENCE {
ccPortalSumStatsShortTimestamp
TimeTicks,
ccPortalSumStatsShortNumPkts
Unsigned32,
ccPortalSumStatsShortPktsPerSec100
ScaleBy100,
ccPortalSumStatsShortPktsPerSecTx100
ScaleBy100,
ccPortalSumStatsShortPktsPerSecRx100
ScaleBy100,
ccPortalSumStatsShortThroughput
Unsigned32,
ccPortalSumStatsShortThroughputTx
Unsigned32,
ccPortalSumStatsShortThroughputRx
Unsigned32,
ccPortalSumStatsShortAvgBitSpeed
Unsigned32,
ccPortalSumStatsShortAvgMuSignal
Integer32,
ccPortalSumStatsShortAvgMuNoise
Integer32,
ccPortalSumStatsShortAvgMuSnr
Integer32,
ccPortalSumStatsShortPp10kNUcastPkts
PartsPer10k,
ccPortalSumStatsShortPp10kTxWithRetries
PartsPer10k,
ccPortalSumStatsShortPp10kTxMaxRetries
PartsPer10k,
ccPortalSumStatsShortTxAvgRetries100
ScaleBy100,
ccPortalSumStatsShortPp10kRxUndecrypt
PartsPer10k,
ccPortalSumStatsShortTotalMus
Unsigned32,
ccPortalSumStatsShortPp10kRfUtil
PartsPer10k
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.1
ccPortalSumStatsShortTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime as of the END of the 'window' of
time that this entry of values represents."
::= { ccPortalSumStatsShortEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.2
ccPortalSumStatsShortNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets used to calculate the statistics in
this window."
::= { ccPortalSumStatsShortEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.3
ccPortalSumStatsShortPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccPortalSumStatsShortEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.4
ccPortalSumStatsShortPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccPortalSumStatsShortEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.5
ccPortalSumStatsShortPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccPortalSumStatsShortEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.6
ccPortalSumStatsShortThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)."
::= { ccPortalSumStatsShortEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.7
ccPortalSumStatsShortThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries)."
::= { ccPortalSumStatsShortEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.8
ccPortalSumStatsShortThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits RX over the window,
divided by the number of seconds in the window."
::= { ccPortalSumStatsShortEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.9
ccPortalSumStatsShortAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/received."
::= { ccPortalSumStatsShortEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.10
ccPortalSumStatsShortAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all signal values over the window.
NOTE: dBm are normally negative. Here the NEGATIVE values
are reported as POSITIVE values. PO"
::= { ccPortalSumStatsShortEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.11
ccPortalSumStatsShortAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all noise values over the window."
::= { ccPortalSumStatsShortEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.12
ccPortalSumStatsShortAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all SNR values over the window."
::= { ccPortalSumStatsShortEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.13
ccPortalSumStatsShortPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of packets that were NOT unicast.
Expressed as parts-per-10000.
"
::= { ccPortalSumStatsShortEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.14
ccPortalSumStatsShortPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of TX packets that experienced one or more retries.
Expressed as parts-per-10000.
"
::= { ccPortalSumStatsShortEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.15
ccPortalSumStatsShortPp10kTxMaxRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of TX packets that were dropped due to excessive.
Expressed as parts-per-10000.
"
::= { ccPortalSumStatsShortEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.16
ccPortalSumStatsShortTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00)."
::= { ccPortalSumStatsShortEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.17
ccPortalSumStatsShortPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of RX packets that were undecryptable.
Expressed as parts-per-10000.
"
::= { ccPortalSumStatsShortEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.18
ccPortalSumStatsShortTotalMus OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "number of MUs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MUs associated to the given Portal."
::= { ccPortalSumStatsShortEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.9.1.19
ccPortalSumStatsShortPp10kRfUtil OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The approximate utilization of the Portal's RF port.
Calculated as Throughput divided by AvgBitSpeed.
Expressed as parts-per-10000.
"
::= { ccPortalSumStatsShortEntry 19 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10
ccPortalSumStatsLongTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortalSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the LONG window for
each Portal.
(Refer to ccPortalSumStatsShortTable for descriptions)."
::= { ccPortalRfSum 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1
ccPortalSumStatsLongEntry OBJECT-TYPE
SYNTAX CcPortalSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex }
::= { ccPortalSumStatsLongTable 1 }
CcPortalSumStatsLongEntry ::=
SEQUENCE {
ccPortalSumStatsLongTimestamp
TimeTicks,
ccPortalSumStatsLongNumPkts
Unsigned32,
ccPortalSumStatsLongPktsPerSec100
ScaleBy100,
ccPortalSumStatsLongPktsPerSecTx100
ScaleBy100,
ccPortalSumStatsLongPktsPerSecRx100
ScaleBy100,
ccPortalSumStatsLongThroughput
Unsigned32,
ccPortalSumStatsLongThroughputTx
Unsigned32,
ccPortalSumStatsLongThroughputRx
Unsigned32,
ccPortalSumStatsLongAvgBitSpeed
Unsigned32,
ccPortalSumStatsLongAvgMuSignal
Integer32,
ccPortalSumStatsLongAvgMuNoise
Integer32,
ccPortalSumStatsLongAvgMuSnr
Integer32,
ccPortalSumStatsLongPp10kNUcastPkts
PartsPer10k,
ccPortalSumStatsLongPp10kTxWithRetries
PartsPer10k,
ccPortalSumStatsLongPp10kTxMaxRetries
PartsPer10k,
ccPortalSumStatsLongTxAvgRetries100
ScaleBy100,
ccPortalSumStatsLongPp10kRxUndecrypt
PartsPer10k,
ccPortalSumStatsLongTotalMus
Unsigned32,
ccPortalSumStatsLongPp10kRfUtil
PartsPer10k
}
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.1
ccPortalSumStatsLongTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.2
ccPortalSumStatsLongNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.3
ccPortalSumStatsLongPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.4
ccPortalSumStatsLongPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.5
ccPortalSumStatsLongPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.6
ccPortalSumStatsLongThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.7
ccPortalSumStatsLongThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.8
ccPortalSumStatsLongThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.9
ccPortalSumStatsLongAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.10
ccPortalSumStatsLongAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.11
ccPortalSumStatsLongAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.12
ccPortalSumStatsLongAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.13
ccPortalSumStatsLongPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.14
ccPortalSumStatsLongPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.15
ccPortalSumStatsLongPp10kTxMaxRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.16
ccPortalSumStatsLongTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.17
ccPortalSumStatsLongPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.18
ccPortalSumStatsLongTotalMus OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "number of MUs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.2.100.10.1.19
ccPortalSumStatsLongPp10kRfUtil OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccPortalSumStatsLongEntry 19 }
-- This group contains MIB values that describe the
-- MUs (Mobile Units) currently associated with each
-- Portal adopted by this WS2000.
-- 1.3.6.1.4.1.388.11.2.4.3
ccAssociation OBJECT IDENTIFIER ::= { ccRf 3 }
-- 1.3.6.1.4.1.388.11.2.4.3.1
ccAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each Portal-MU
association."
::= { ccAssociation 1 }
-- 1.3.6.1.4.1.388.11.2.4.3.1.1
ccAssociationEntry OBJECT-TYPE
SYNTAX CcAssociationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortalIndex, ccMuMac }
::= { ccAssociationTable 1 }
CcAssociationEntry ::=
SEQUENCE {
ccAssociationFirstAssociate
TimeTicks,
ccAssociationLastAssociate
TimeTicks,
ccAssociationCountAssociates
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.3.1.1.1
ccAssociationFirstAssociate OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the switch's sysUpTime at the time
of the first time this MU associated to this
Portal."
::= { ccAssociationEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.3.1.1.2
ccAssociationLastAssociate OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the switch's sysUpTime at the time
of the time this MU most recently associated to
this Portal."
::= { ccAssociationEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.3.1.1.3
ccAssociationCountAssociates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of times this MU has
associated to this Portal."
::= { ccAssociationEntry 3 }
-- This group contains MIB values that describe the
-- MUs (Mobile Units) known to this WS2000.
-- 1.3.6.1.4.1.388.11.2.4.4
ccMus OBJECT IDENTIFIER ::= { ccRf 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.1
ccMuInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes general information about
each MU serviced by the switch."
::= { ccMus 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1
ccMuInfoEntry OBJECT-TYPE
SYNTAX CcMuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuInfoTable 1 }
CcMuInfoEntry ::=
SEQUENCE {
ccMuMac
PhysAddress,
ccMuWlanIndex
Integer32,
ccMuWlanName
DisplayString,
ccMuIsDataReady
TruthValue,
ccMuPortalIndex
Integer32,
ccMuPortalMac
PhysAddress,
ccMuSymbolRogueApEna
TruthValue,
ccMuIpAddr
IpAddress,
ccMuType
INTEGER,
ccMuRadioType
RadioType,
ccMuSupportedRates
BITS,
ccMuPowerMode
INTEGER,
ccMuAuthenticationMethod
INTEGER,
ccMuEncryptionMethod
INTEGER,
ccMuVlanId
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.1
ccMuMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the MU."
::= { ccMuInfoEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.2
ccMuWlanIndex OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(Reserved for future implementation)."
::= { ccMuInfoEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.3
ccMuWlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the WLAN this MU is associated to."
::= { ccMuInfoEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.4
ccMuIsDataReady OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is true if the WS2000 is ready to
forward/switch packets to/from this MU,
(internally called the 'data ready' state).
Otherwise this value is false."
::= { ccMuInfoEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.5
ccMuPortalIndex OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the entry in the PortalTable to
which this MU is associated."
::= { ccMuInfoEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.6
ccMuPortalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the Portal to which this MU is
associated."
::= { ccMuInfoEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.7
ccMuSymbolRogueApEna OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, this MU supports Symbol's Rogue AP
detection assist algorithm."
::= { ccMuInfoEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.8
ccMuIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the MU."
::= { ccMuInfoEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.9
ccMuType OBJECT-TYPE
SYNTAX INTEGER
{
data(1),
voice(2),
accessPoint(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the MU."
::= { ccMuInfoEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.10
ccMuRadioType OBJECT-TYPE
SYNTAX RadioType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio type of the MU."
::= { ccMuInfoEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.11
ccMuSupportedRates OBJECT-TYPE
SYNTAX BITS
{
supports1Mb(0),
supports2Mb(1),
supports5dot5Mb(2),
supports6Mb(3),
supports9Mb(4),
supports11Mb(5),
supports12Mb(6),
supports18Mb(7),
supports22Mb(8),
supports24Mb(9),
supports36Mb(10),
supports48Mb(11),
supports54Mb(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit-mask of rates supported by this MU."
::= { ccMuInfoEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.12
ccMuPowerMode OBJECT-TYPE
SYNTAX INTEGER
{
continuousAccessMode(1),
powerSavePolling(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power-mode implemented by the MU.
A MU's status will constantly switch between PSP and
CAM mode when it is in PSP mode.
"
::= { ccMuInfoEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.13
ccMuAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
eap802dot1x(2),
kerberos(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication method implemented by the MU."
::= { ccMuInfoEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.14
ccMuEncryptionMethod OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
wep40(2),
wep128(3),
keyGuardMCM(4),
wpaTKIP(5),
wpa2AesCcmp(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption method implemented by the MU."
::= { ccMuInfoEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.1.1.15
ccMuVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN that this MU is assigned to.
"
::= { ccMuInfoEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.2
ccMuStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes general statistics about
packets sent/recieved via each MU serviced by the switch."
::= { ccMus 2 }
-- All
-- 1.3.6.1.4.1.388.11.2.4.4.2.1
ccMuStatsEntry OBJECT-TYPE
SYNTAX CcMuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuStatsTable 1 }
CcMuStatsEntry ::=
SEQUENCE {
ccMuTxPktsUcast
Counter32,
ccMuRxPktsUcast
Counter32,
ccMuRxPktsNUcast
Counter32,
ccMuTxOctetsUcast
Counter32,
ccMuRxOctetsUcast
Counter32,
ccMuRxOctetsNUcast
Counter32,
ccMuRxUndecryptablePkts
Counter32,
ccMuRxRssiNumPkts
Counter32,
ccMuRxRssiSum
Counter32,
ccMuRxRssiSumSquares
Counter64,
ccMuRxRssiMostRecent
INTEGER,
ccMuLastActivity
TimeTicks
}
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.1
ccMuTxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets sent."
::= { ccMuStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.2
ccMuRxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets received."
::= { ccMuStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.3
ccMuRxPktsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
packets received."
::= { ccMuStatsEntry 3 }
-- This value existed in WS2000 v1.0, but never incremented
-- from 0. This variable should never have been defined,
-- since there is no such thing as a non-unicast packet
-- moving from a MU to a Portal, (Rx at the Portal).
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.4
ccMuTxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets sent."
::= { ccMuStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.5
ccMuRxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets received."
::= { ccMuStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.6
ccMuRxOctetsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
octets received."
::= { ccMuStatsEntry 6 }
-- This value existed in WS2000 v1.0, but never incremented
-- from 0. This variable should never have been defined,
-- since there is no such thing as a non-unicast packet
-- moving from a MU to a Portal, (Rx at the Portal).
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.7
ccMuRxUndecryptablePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of packets received that could
not be decrypted."
::= { ccMuStatsEntry 7 }
-- This value is duplicated by ccMuSigStatsNumPkts, but this
-- one is retained for backwards-compatibility.
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.8
ccMuRxRssiNumPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total RSSI packets received."
::= { ccMuStatsEntry 8 }
-- This value is duplicated by ccMuSigStatsRssiSum, but this
-- one is retained for backwards-compatibility.
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.9
ccMuRxRssiSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all RSSI values calculated by the
switch for packets."
::= { ccMuStatsEntry 9 }
-- This value is duplicated by ccMuSigStatsRssiSumSquares,
-- but this one is retained for backwards-compatibility.
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.10
ccMuRxRssiSumSquares OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each RSSI value calculated
for packets received.
This value is never negative."
::= { ccMuStatsEntry 10 }
-- This value is duplicated by ccMuSigStatsRssiMostRecent,
-- but this one is retained for backwards-compatibility.
--
-- ??-CM: this should be Uint32 - would chaning this be an
-- incompatible change? Any diff on wire Int32 vs Unit32 ?
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.11
ccMuRxRssiMostRecent OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best RSSI value seen so far.
(Remember that -80dBm Noise is better than -70dBm).
This value does not make sense when ccMuRxRssiNumPkts
equals to 0."
::= { ccMuStatsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.2.1.12
ccMuLastActivity OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the switch's sysUpTime at the time
of the last activity (packet sent or received)."
::= { ccMuStatsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.3
ccMuRxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by the switch, this table
describes counts of packets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccMus 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1
ccMuRxPktsEntry OBJECT-TYPE
SYNTAX CcMuRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuRxPktsTable 1 }
CcMuRxPktsEntry ::=
SEQUENCE {
ccMuRxPktsAt1Mb
Counter32,
ccMuRxPktsAt2Mb
Counter32,
ccMuRxPktsAt5pt5Mb
Counter32,
ccMuRxPktsAt6Mb
Counter32,
ccMuRxPktsAt9Mb
Counter32,
ccMuRxPktsAt11Mb
Counter32,
ccMuRxPktsAt12Mb
Counter32,
ccMuRxPktsAt18Mb
Counter32,
ccMuRxPktsAt22Mb
Counter32,
ccMuRxPktsAt24Mb
Counter32,
ccMuRxPktsAt36Mb
Counter32,
ccMuRxPktsAt48Mb
Counter32,
ccMuRxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.1
ccMuRxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 1 Mb."
::= { ccMuRxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.2
ccMuRxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 2 Mb."
::= { ccMuRxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.3
ccMuRxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 5.5 Mb."
::= { ccMuRxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.4
ccMuRxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 6 Mb."
::= { ccMuRxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.5
ccMuRxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 9 Mb."
::= { ccMuRxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.6
ccMuRxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 11 Mb."
::= { ccMuRxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.7
ccMuRxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 12 Mb."
::= { ccMuRxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.8
ccMuRxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 18 Mb."
::= { ccMuRxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.9
ccMuRxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 22 Mb."
::= { ccMuRxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.10
ccMuRxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 24 Mb."
::= { ccMuRxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.11
ccMuRxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 36 Mb."
::= { ccMuRxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.12
ccMuRxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 48 Mb."
::= { ccMuRxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.3.1.13
ccMuRxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 54 Mb."
::= { ccMuRxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.4
ccMuTxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by the switch, this table
describes counts of packets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccMus 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1
ccMuTxPktsEntry OBJECT-TYPE
SYNTAX CcMuTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuTxPktsTable 1 }
CcMuTxPktsEntry ::=
SEQUENCE {
ccMuTxPktsAt1Mb
Counter32,
ccMuTxPktsAt2Mb
Counter32,
ccMuTxPktsAt5pt5Mb
Counter32,
ccMuTxPktsAt6Mb
Counter32,
ccMuTxPktsAt9Mb
Counter32,
ccMuTxPktsAt11Mb
Counter32,
ccMuTxPktsAt12Mb
Counter32,
ccMuTxPktsAt18Mb
Counter32,
ccMuTxPktsAt22Mb
Counter32,
ccMuTxPktsAt24Mb
Counter32,
ccMuTxPktsAt36Mb
Counter32,
ccMuTxPktsAt48Mb
Counter32,
ccMuTxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.1
ccMuTxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 1 Mb."
::= { ccMuTxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.2
ccMuTxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 2 Mb."
::= { ccMuTxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.3
ccMuTxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 5.5 Mb."
::= { ccMuTxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.4
ccMuTxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 6 Mb."
::= { ccMuTxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.5
ccMuTxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 9 Mb."
::= { ccMuTxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.6
ccMuTxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 11 Mb."
::= { ccMuTxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.7
ccMuTxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 12 Mb."
::= { ccMuTxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.8
ccMuTxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 18 Mb."
::= { ccMuTxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.9
ccMuTxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 22 Mb."
::= { ccMuTxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.10
ccMuTxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 24 Mb."
::= { ccMuTxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.11
ccMuTxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 36 Mb."
::= { ccMuTxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.12
ccMuTxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 48 Mb."
::= { ccMuTxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.4.1.13
ccMuTxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 54 Mb."
::= { ccMuTxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.5
ccMuRxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by this switch, this table
describes counts of octets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccMus 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1
ccMuRxOctetsEntry OBJECT-TYPE
SYNTAX CcMuRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuRxOctetsTable 1 }
CcMuRxOctetsEntry ::=
SEQUENCE {
ccMuRxOctetsAt1Mb
Counter32,
ccMuRxOctetsAt2Mb
Counter32,
ccMuRxOctetsAt5pt5Mb
Counter32,
ccMuRxOctetsAt6Mb
Counter32,
ccMuRxOctetsAt9Mb
Counter32,
ccMuRxOctetsAt11Mb
Counter32,
ccMuRxOctetsAt12Mb
Counter32,
ccMuRxOctetsAt18Mb
Counter32,
ccMuRxOctetsAt22Mb
Counter32,
ccMuRxOctetsAt24Mb
Counter32,
ccMuRxOctetsAt36Mb
Counter32,
ccMuRxOctetsAt48Mb
Counter32,
ccMuRxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.1
ccMuRxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 1 Mb."
::= { ccMuRxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.2
ccMuRxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 2 Mb."
::= { ccMuRxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.3
ccMuRxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 5.5 Mb."
::= { ccMuRxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.4
ccMuRxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 6 Mb."
::= { ccMuRxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.5
ccMuRxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 9 Mb."
::= { ccMuRxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.6
ccMuRxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 11 Mb."
::= { ccMuRxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.7
ccMuRxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 12 Mb."
::= { ccMuRxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.8
ccMuRxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 18 Mb."
::= { ccMuRxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.9
ccMuRxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 22 Mb."
::= { ccMuRxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.10
ccMuRxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 24 Mb."
::= { ccMuRxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.11
ccMuRxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 36 Mb."
::= { ccMuRxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.12
ccMuRxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 48 Mb."
::= { ccMuRxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.5.1.13
ccMuRxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 54 Mb."
::= { ccMuRxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.6
ccMuTxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by this switch, this table
describes counts of octets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccMus 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1
ccMuTxOctetsEntry OBJECT-TYPE
SYNTAX CcMuTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuTxOctetsTable 1 }
CcMuTxOctetsEntry ::=
SEQUENCE {
ccMuTxOctetsAt1Mb
Counter32,
ccMuTxOctetsAt2Mb
Counter32,
ccMuTxOctetsAt5pt5Mb
Counter32,
ccMuTxOctetsAt6Mb
Counter32,
ccMuTxOctetsAt9Mb
Counter32,
ccMuTxOctetsAt11Mb
Counter32,
ccMuTxOctetsAt12Mb
Counter32,
ccMuTxOctetsAt18Mb
Counter32,
ccMuTxOctetsAt22Mb
Counter32,
ccMuTxOctetsAt24Mb
Counter32,
ccMuTxOctetsAt36Mb
Counter32,
ccMuTxOctetsAt48Mb
Counter32,
ccMuTxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.1
ccMuTxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 1 Mb."
::= { ccMuTxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.2
ccMuTxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 2 Mb."
::= { ccMuTxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.3
ccMuTxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 5.5 Mb."
::= { ccMuTxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.4
ccMuTxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 6 Mb."
::= { ccMuTxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.5
ccMuTxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 9 Mb."
::= { ccMuTxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.6
ccMuTxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 11 Mb."
::= { ccMuTxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.7
ccMuTxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 12 Mb."
::= { ccMuTxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.8
ccMuTxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 18 Mb."
::= { ccMuTxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.9
ccMuTxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 22 Mb."
::= { ccMuTxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.10
ccMuTxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 24 Mb."
::= { ccMuTxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.11
ccMuTxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 36 Mb."
::= { ccMuTxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.12
ccMuTxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 48 Mb."
::= { ccMuTxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.6.1.13
ccMuTxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 54 Mb."
::= { ccMuTxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.7
ccMuTxRetriesTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuTxRetriesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by the switch, this table describes
counts of the number of packets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccMus 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1
ccMuTxRetriesEntry OBJECT-TYPE
SYNTAX CcMuTxRetriesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuTxRetriesTable 1 }
CcMuTxRetriesEntry ::=
SEQUENCE {
ccMuTxRetriesNone
Counter32,
ccMuTxRetries01
Counter32,
ccMuTxRetries02
Counter32,
ccMuTxRetries03
Counter32,
ccMuTxRetries04
Counter32,
ccMuTxRetries05
Counter32,
ccMuTxRetries06
Counter32,
ccMuTxRetries07
Counter32,
ccMuTxRetries08
Counter32,
ccMuTxRetries09
Counter32,
ccMuTxRetries10
Counter32,
ccMuTxRetries11
Counter32,
ccMuTxRetries12
Counter32,
ccMuTxRetries13
Counter32,
ccMuTxRetries14
Counter32,
ccMuTxRetries15
Counter32,
ccMuTxRetriesFailed
Counter32,
ccMuTxRetriesTotal
Counter32,
ccMuTxRetriesMostRecent
INTEGER
}
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.1
ccMuTxRetriesNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with no retries."
::= { ccMuTxRetriesEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.2
ccMuTxRetries01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 1 retries."
::= { ccMuTxRetriesEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.3
ccMuTxRetries02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 2 retries."
::= { ccMuTxRetriesEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.4
ccMuTxRetries03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 3 retries."
::= { ccMuTxRetriesEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.5
ccMuTxRetries04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 4 retries."
::= { ccMuTxRetriesEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.6
ccMuTxRetries05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 5 retries."
::= { ccMuTxRetriesEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.7
ccMuTxRetries06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 6 retries."
::= { ccMuTxRetriesEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.8
ccMuTxRetries07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 7 retries."
::= { ccMuTxRetriesEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.9
ccMuTxRetries08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 8 retries."
::= { ccMuTxRetriesEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.10
ccMuTxRetries09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 9 retries."
::= { ccMuTxRetriesEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.11
ccMuTxRetries10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 10 retries."
::= { ccMuTxRetriesEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.12
ccMuTxRetries11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 11 retries."
::= { ccMuTxRetriesEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.13
ccMuTxRetries12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 12 retries."
::= { ccMuTxRetriesEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.14
ccMuTxRetries13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 13 retries."
::= { ccMuTxRetriesEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.15
ccMuTxRetries14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 14 retries."
::= { ccMuTxRetriesEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.16
ccMuTxRetries15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 15 retries."
::= { ccMuTxRetriesEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.17
ccMuTxRetriesFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts that never were successfully
transmitted to because the max retry count was exceeded."
::= { ccMuTxRetriesEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.18
ccMuTxRetriesTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A total sum of all retries across all packets sent
to this MU.
For example, if 4 packets have been sent, with the
following number of retires: 2, 0, 5, gave-up,
this value would be 2+0+5+16 = 23."
::= { ccMuTxRetriesEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.4.7.1.19
ccMuTxRetriesMostRecent OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Most recent retry done by MU."
::= { ccMuTxRetriesEntry 19 }
-- 1.3.6.1.4.1.388.11.2.4.4.8
ccMuLastMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This scalar records the MAC address of the most
recent MU to be Adopted, UnAdopted, or Denied."
::= { ccMus 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.9
ccMuLastReason OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
aclViolation(2),
timeout(3),
associationFailed(4),
authenticationFailedOn802dot1x(5),
kerberosWrongUsername(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value notes the reason for the most-recent
MU UnAdoption or Denial.
Enum item associationFailed indicates that a key
association field was missing, or a mismatch of
supported rates, etc."
::= { ccMus 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.10
ccMuLastPortal OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value notes the reason for the most-recent
MU UnAdoption or Denial."
::= { ccMus 10 }
-- !!- OID: .100
--
-- (This group would have contained all the stats tables,
-- except that they were located above, before I created
-- matching groups and tables in ccPortal and ccWlan).
-- 1.3.6.1.4.1.388.11.2.4.4.100
ccMuRfSum OBJECT IDENTIFIER ::= { ccMus 100 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1
ccMuTxRetriesOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by the switch, this table describes
counts of the number of octets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccMuRfSum 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1
ccMuTxRetriesOctetsEntry OBJECT-TYPE
SYNTAX CcMuTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuTxRetriesOctetsTable 1 }
CcMuTxRetriesOctetsEntry ::=
SEQUENCE {
ccMuTxRetriesOctetsNone
Counter32,
ccMuTxRetriesOctets01
Counter32,
ccMuTxRetriesOctets02
Counter32,
ccMuTxRetriesOctets03
Counter32,
ccMuTxRetriesOctets04
Counter32,
ccMuTxRetriesOctets05
Counter32,
ccMuTxRetriesOctets06
Counter32,
ccMuTxRetriesOctets07
Counter32,
ccMuTxRetriesOctets08
Counter32,
ccMuTxRetriesOctets09
Counter32,
ccMuTxRetriesOctets10
Counter32,
ccMuTxRetriesOctets11
Counter32,
ccMuTxRetriesOctets12
Counter32,
ccMuTxRetriesOctets13
Counter32,
ccMuTxRetriesOctets14
Counter32,
ccMuTxRetriesOctets15
Counter32,
ccMuTxRetriesOctetsFailed
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.1
ccMuTxRetriesOctetsNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with no retries."
::= { ccMuTxRetriesOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.2
ccMuTxRetriesOctets01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 1 retries."
::= { ccMuTxRetriesOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.3
ccMuTxRetriesOctets02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 2 retries."
::= { ccMuTxRetriesOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.4
ccMuTxRetriesOctets03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 3 retries."
::= { ccMuTxRetriesOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.5
ccMuTxRetriesOctets04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 4 retries."
::= { ccMuTxRetriesOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.6
ccMuTxRetriesOctets05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 5 retries."
::= { ccMuTxRetriesOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.7
ccMuTxRetriesOctets06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 6 retries."
::= { ccMuTxRetriesOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.8
ccMuTxRetriesOctets07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 7 retries."
::= { ccMuTxRetriesOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.9
ccMuTxRetriesOctets08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 8 retries."
::= { ccMuTxRetriesOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.10
ccMuTxRetriesOctets09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 9 retries."
::= { ccMuTxRetriesOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.11
ccMuTxRetriesOctets10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 10 retries."
::= { ccMuTxRetriesOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.12
ccMuTxRetriesOctets11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 11 retries."
::= { ccMuTxRetriesOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.13
ccMuTxRetriesOctets12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 12 retries."
::= { ccMuTxRetriesOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.14
ccMuTxRetriesOctets13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 13 retries."
::= { ccMuTxRetriesOctetsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.15
ccMuTxRetriesOctets14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 14 retries."
::= { ccMuTxRetriesOctetsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.16
ccMuTxRetriesOctets15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 15 retries."
::= { ccMuTxRetriesOctetsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.1.1.17
ccMuTxRetriesOctetsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets that never were successfully
transmitted to because the max retry count was exceeded."
::= { ccMuTxRetriesOctetsEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2
ccMuSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes statistics about RSSI, Signal, Noise,
and SNR for packets recieved via each MU serviced by the switch."
::= { ccMuRfSum 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1
ccMuSigStatsEntry OBJECT-TYPE
SYNTAX CcMuSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuSigStatsTable 1 }
CcMuSigStatsEntry ::=
SEQUENCE {
ccMuSigStatsNumPkts
Counter32,
ccMuSigStatsSignalBest
Integer32,
ccMuSigStatsSignalWorst
Integer32,
ccMuSigStatsSignalSum
Integer32,
ccMuSigStatsSignalSumSquares
Counter64,
ccMuSigStatsSignalMostRecent
Integer32,
ccMuSigStatsNoiseBest
Integer32,
ccMuSigStatsNoiseWorst
Integer32,
ccMuSigStatsNoiseSum
Integer32,
ccMuSigStatsNoiseSumSquares
Counter64,
ccMuSigStatsNoiseMostRecent
Integer32,
ccMuSigStatsSnrBest
Integer32,
ccMuSigStatsSnrWorst
Integer32,
ccMuSigStatsSnrSum
Integer32,
ccMuSigStatsSnrSumSquares
Counter64,
ccMuSigStatsSnrMostRecent
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.1
ccMuSigStatsNumPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total packets received included in
all the other counters reported in this row."
::= { ccMuSigStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.2
ccMuSigStatsSignalBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to -500dBm.
"
::= { ccMuSigStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.3
ccMuSigStatsSignalWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Signal value seen so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to 500dBm."
::= { ccMuSigStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.4
ccMuSigStatsSignalSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets received.
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal."
::= { ccMuSigStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.5
ccMuSigStatsSignalSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Signal value calculated
for packets received.
Unlike _SignalSum, this value is never negative, since
the square of a negative number is a positive."
::= { ccMuSigStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.6
ccMuSigStatsSignalMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value does not make sense when ccMuSigStatsNumPkts
equals to 0."
::= { ccMuSigStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.7
ccMuSigStatsNoiseBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Noise value seen so far.
(Remember that -80dBm Noise is better than -70dBm).
This value is initialized to 500dBm."
::= { ccMuSigStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.8
ccMuSigStatsNoiseWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Noise value seen so far.
(Remember that -50dBm Noise is worse than -60dBm).
This value is initialized to -500dBm."
::= { ccMuSigStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.9
ccMuSigStatsNoiseSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Noise values calculated by the
switch (using reported RSSI values), for packets.
Like _SignalSum, this value is normally a negative value."
::= { ccMuSigStatsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.10
ccMuSigStatsNoiseSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Noise value calculated
for packets received.
As with _SignalSumSquares, this value is never negative."
::= { ccMuSigStatsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.11
ccMuSigStatsNoiseMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Noise value seen so far.
(Remember that -80dBm Noise is better than -70dBm).
This value does not make sense when ccMuSigStatsNumPkts
equals to 0."
::= { ccMuSigStatsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.12
ccMuSigStatsSnrBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best SNR value seen so far.
(Remember that +30dBm SNR is better than +20dBm).
This value is initialized to -500dB."
::= { ccMuSigStatsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.13
ccMuSigStatsSnrWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst SNR value seen so far.
(Remember that +10dBm SNR is worse than +20dBm).
This value is initialized to 500dB."
::= { ccMuSigStatsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.14
ccMuSigStatsSnrSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all SNR values calculated by the
switch (using reported RSSI values), for packets received.
Unlike _Signal and _Noise, this value is never negative."
::= { ccMuSigStatsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.15
ccMuSigStatsSnrSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each SNR value calculated
for packets received.
This value is never negative."
::= { ccMuSigStatsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.2.1.16
ccMuSigStatsSnrMostRecent OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best SNR value seen so far.
(Remember that +30dBm SNR is better than +20dBm).
This value does not make sense when ccMuSigStatsNumPkts
equals to 0."
::= { ccMuSigStatsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3
ccMuSumStatsShortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the SHORT window for
each MU."
::= { ccMuRfSum 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1
ccMuSumStatsShortEntry OBJECT-TYPE
SYNTAX CcMuSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuSumStatsShortTable 1 }
CcMuSumStatsShortEntry ::=
SEQUENCE {
ccMuSumStatsShortTimestamp
TimeTicks,
ccMuSumStatsShortNumPkts
Unsigned32,
ccMuSumStatsShortPktsPerSec100
ScaleBy100,
ccMuSumStatsShortPktsPerSecTx100
ScaleBy100,
ccMuSumStatsShortPktsPerSecRx100
ScaleBy100,
ccMuSumStatsShortThroughput
Unsigned32,
ccMuSumStatsShortThroughputTx
Unsigned32,
ccMuSumStatsShortThroughputRx
Unsigned32,
ccMuSumStatsShortAvgBitSpeed
Unsigned32,
ccMuSumStatsShortAvgMuSignal
Integer32,
ccMuSumStatsShortAvgMuNoise
Integer32,
ccMuSumStatsShortAvgMuSnr
Integer32,
ccMuSumStatsShortPp10kNUcastPkts
PartsPer10k,
ccMuSumStatsShortPp10kTxWithRetries
PartsPer10k,
ccMuSumStatsShortPp10kDropped
PartsPer10k,
ccMuSumStatsShortTxAvgRetries100
ScaleBy100,
ccMuSumStatsShortPp10kRxUndecrypt
PartsPer10k
}
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.1
ccMuSumStatsShortTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime as of the END of the 'window' of
time that this entry of values represents."
::= { ccMuSumStatsShortEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.2
ccMuSumStatsShortNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets used to calculate the statistics in
this window."
::= { ccMuSumStatsShortEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.3
ccMuSumStatsShortPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccMuSumStatsShortEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.4
ccMuSumStatsShortPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccMuSumStatsShortEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.5
ccMuSumStatsShortPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccMuSumStatsShortEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.6
ccMuSumStatsShortThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)."
::= { ccMuSumStatsShortEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.7
ccMuSumStatsShortThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries)."
::= { ccMuSumStatsShortEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.8
ccMuSumStatsShortThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits RX over the window,
divided by the number of seconds in the window."
::= { ccMuSumStatsShortEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.9
ccMuSumStatsShortAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/received."
::= { ccMuSumStatsShortEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.10
ccMuSumStatsShortAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all signal values over the window.
NOTE: dBm are normally negative. Here the NEGATIVE values
are reported as POSITIVE values. PO"
::= { ccMuSumStatsShortEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.11
ccMuSumStatsShortAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all noise values over the window."
::= { ccMuSumStatsShortEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.12
ccMuSumStatsShortAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all SNR values over the window."
::= { ccMuSumStatsShortEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.13
ccMuSumStatsShortPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of packets that were NOT unicast.
Expressed as parts-per-10000."
::= { ccMuSumStatsShortEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.14
ccMuSumStatsShortPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of TX packets that experienced one or more retries.
Expressed as parts-per-10000."
::= { ccMuSumStatsShortEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.15
ccMuSumStatsShortPp10kDropped OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets dropped divided by packets sent. Dropped here
means dropped intentionally due to the appropriate QoS
queue being full. Other reasons for dropped packets are
not counted in this ratio.
Calculated as an average for all WLANs implemented on
this MU."
::= { ccMuSumStatsShortEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.16
ccMuSumStatsShortTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00)."
::= { ccMuSumStatsShortEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.3.1.17
ccMuSumStatsShortPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of RX packets that were undecryptable.
Expressed as parts-per-10000.
"
::= { ccMuSumStatsShortEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4
ccMuSumStatsLongTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcMuSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the LONG window for
each MU.
(Refer to ccMuSumStatsShortTable for descriptions)."
::= { ccMuRfSum 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1
ccMuSumStatsLongEntry OBJECT-TYPE
SYNTAX CcMuSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccMuMac }
::= { ccMuSumStatsLongTable 1 }
CcMuSumStatsLongEntry ::=
SEQUENCE {
ccMuSumStatsLongTimestamp
TimeTicks,
ccMuSumStatsLongNumPkts
Unsigned32,
ccMuSumStatsLongPktsPerSec100
ScaleBy100,
ccMuSumStatsLongPktsPerSecTx100
ScaleBy100,
ccMuSumStatsLongPktsPerSecRx100
ScaleBy100,
ccMuSumStatsLongThroughput
Unsigned32,
ccMuSumStatsLongThroughputTx
Unsigned32,
ccMuSumStatsLongThroughputRx
Unsigned32,
ccMuSumStatsLongAvgBitSpeed
Unsigned32,
ccMuSumStatsLongAvgMuSignal
Integer32,
ccMuSumStatsLongAvgMuNoise
Integer32,
ccMuSumStatsLongAvgMuSnr
Integer32,
ccMuSumStatsLongPp10kNUcastPkts
PartsPer10k,
ccMuSumStatsLongPp10kTxWithRetries
PartsPer10k,
ccMuSumStatsLongPp10kDropped
PartsPer10k,
ccMuSumStatsLongTxAvgRetries100
ScaleBy100,
ccMuSumStatsLongPp10kRxUndecrypt
PartsPer10k
}
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.1
ccMuSumStatsLongTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.2
ccMuSumStatsLongNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.3
ccMuSumStatsLongPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.4
ccMuSumStatsLongPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.5
ccMuSumStatsLongPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.6
ccMuSumStatsLongThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.7
ccMuSumStatsLongThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.8
ccMuSumStatsLongThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.9
ccMuSumStatsLongAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.10
ccMuSumStatsLongAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.11
ccMuSumStatsLongAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.12
ccMuSumStatsLongAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.13
ccMuSumStatsLongPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.14
ccMuSumStatsLongPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.15
ccMuSumStatsLongPp10kDropped OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.16
ccMuSumStatsLongTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.4.100.4.1.17
ccMuSumStatsLongPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccMuSumStatsLongEntry 17 }
-- This group describes all wireless LANs on the switch,
-- and their corresponding security settings.
-- 1.3.6.1.4.1.388.11.2.4.5
ccWlan OBJECT IDENTIFIER ::= { ccRf 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.1
ccWlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of wireless LANs configured on the switch."
::= { ccWlan 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1
ccWlanEntry OBJECT-TYPE
SYNTAX CcWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanTable 1 }
CcWlanEntry ::=
SEQUENCE {
ccWlanIndex
Integer32,
ccWlanName
DisplayString,
ccWlanEssid
DisplayString,
ccWlanSubnet
SinglePointer,
ccWlanPortalsAdopted
MultiPointer255,
ccWlanEnable
StaticRowEnable,
ccWlanDisallowMuToMu
TruthValue,
ccWlanVoicePrioritization
TruthValue,
ccWlanAnswerBroadcastEss
TruthValue,
ccWlanMulticastAddr1
PhysAddress,
ccWlanMulticastAddr2
PhysAddress,
ccWlanMuAclDefault
INTEGER,
ccWlanAuthentication
INTEGER,
ccWlanEncryption
INTEGER,
ccWlanWeight
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.1
ccWlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..1001)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index.
(In the ccRfSum tables, entry 1001 is used to
represent the roll-up of all RF communications on
this switch).
"
::= { ccWlanEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.2
ccWlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the WLAN."
::= { ccWlanEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.3
ccWlanEssid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESSID of the WLAN."
::= { ccWlanEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.4
ccWlanSubnet OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet/LAN this WLAN is associated with.
If not associated with any subnet/LAN, this value
will be 0."
::= { ccWlanEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.5
ccWlanPortalsAdopted OBJECT-TYPE
SYNTAX MultiPointer255
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to portal(s) adopted by this WLAN."
::= { ccWlanEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.6
ccWlanEnable OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row enable."
::= { ccWlanEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.7
ccWlanDisallowMuToMu OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to prohibit MU-to-MU communication."
::= { ccWlanEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.8
ccWlanVoicePrioritization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable voice prioritization."
::= { ccWlanEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.9
ccWlanAnswerBroadcastEss OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Answer broadcast ESS."
::= { ccWlanEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.10
ccWlanMulticastAddr1 OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast address 1."
::= { ccWlanEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.11
ccWlanMulticastAddr2 OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast address 2."
::= { ccWlanEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.12
ccWlanMuAclDefault OBJECT-TYPE
SYNTAX INTEGER
{
allowAllMusExceptThoseMatchingAclRules(1),
denyAllMusExceptThoseMatchingAclRules(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the default behavior if none of this WLAN's
ccWlanMuAclTable entries match the MAC address of an
MU attempting to associate with this WLAN."
::= { ccWlanEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.13
ccWlanAuthentication OBJECT-TYPE
SYNTAX INTEGER
{
authNone(1),
auth802dot1xEap(2),
authKerberos(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If auth802dot1xEap, additional EAP settings for this
WLAN will be used from the matching entry in the
ccWlanAuthEapTable.
Likewise, if authKerberos, use the settings in the
matching entry in the ccWlanAuthKerberosTable."
::= { ccWlanEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.14
ccWlanEncryption OBJECT-TYPE
SYNTAX INTEGER
{
cryptoNone(1),
cryptoWep40(2),
cryptoWep104(3),
cryptoKeyguardMcm(4),
cryptoWpaTkip(5),
cryptoWpa2Ccmp(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If cryptoWep40 or cryptoWep128, additional WEP
settings for this WLAN will be used from the matching
entry in the ccWlanCryptoWepTable.
Likewise, if cryptoWpaTkip, use the settings in the
matching entry in the ccWlanCryptoWpaTable.
Likewise, if cryptoKeyguardMcm, use the settings in
the matching entry in the ccWlanCryptoKeyguardTable."
::= { ccWlanEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.1.1.15
ccWlanWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The weight to be used when QoS for all WLANs
is set to weighted-round-robin.
Note that the sum of all weights across all
WLANs need not total 100.
"
::= { ccWlanEntry 15 }
-- This group contains authentication settings for all
-- WLANs.
-- 1.3.6.1.4.1.388.11.2.4.5.2
ccWlanAuth OBJECT IDENTIFIER ::= { ccWlan 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1
ccWlanAuthEapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanAuthEapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of EAP authentication settings for each WLAN."
::= { ccWlanAuth 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1
ccWlanAuthEapEntry OBJECT-TYPE
SYNTAX CcWlanAuthEapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanAuthEapTable 1 }
CcWlanAuthEapEntry ::=
SEQUENCE {
ccWlanAuthEapReauthenticationEnable
TruthValue,
ccWlanAuthEapReauthenticationPeriod
Unsigned32,
ccWlanAuthEapReauthenticationMaxRetries
Unsigned32,
ccWlanAuthEapRadius1Server
IpAddress,
ccWlanAuthEapRadius1Port
Unsigned32,
ccWlanAuthEapRadius1SharedSecret
Password,
ccWlanAuthEapRadius2Server
IpAddress,
ccWlanAuthEapRadius2Port
Unsigned32,
ccWlanAuthEapRadius2SharedSecret
Password,
ccWlanAuthEapMuQuietPeriod
Unsigned32,
ccWlanAuthEapMuTimeout
Unsigned32,
ccWlanAuthEapMuTxPeriod
Unsigned32,
ccWlanAuthEapMuMaxRetries
Unsigned32,
ccWlanAuthEapServerTimeout
Unsigned32,
ccWlanAuthEapServerMaxRetries
Unsigned32,
ccWlanAuthEapRadiusAcctMode
TruthValue,
ccWlanAuthEapRadiusAcctMuTimeout
Unsigned32,
ccWlanAuthEapRadiusAcctMuRetries
Unsigned32,
ccWlanAuthEapSyslogMode
TruthValue,
ccWlanAuthEapSyslogSeverIp
IpAddress
}
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.1
ccWlanAuthEapReauthenticationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable reauthentication."
::= { ccWlanAuthEapEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.2
ccWlanAuthEapReauthenticationPeriod OBJECT-TYPE
SYNTAX Unsigned32 (30..9999)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reauthentication period."
::= { ccWlanAuthEapEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.3
ccWlanAuthEapReauthenticationMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reauthentication max retries."
::= { ccWlanAuthEapEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.4
ccWlanAuthEapRadius1Server OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the primary RADIUS server."
::= { ccWlanAuthEapEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.5
ccWlanAuthEapRadius1Port OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port number of the primary RADIUS server."
::= { ccWlanAuthEapEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.6
ccWlanAuthEapRadius1SharedSecret OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret of the primary RADIUS server."
::= { ccWlanAuthEapEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.7
ccWlanAuthEapRadius2Server OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the secondary RADIUS server."
::= { ccWlanAuthEapEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.8
ccWlanAuthEapRadius2Port OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port number of the secondary RADIUS server."
::= { ccWlanAuthEapEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.9
ccWlanAuthEapRadius2SharedSecret OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret of the secondary RADIUS server."
::= { ccWlanAuthEapEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.10
ccWlanAuthEapMuQuietPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU quiet period."
::= { ccWlanAuthEapEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.11
ccWlanAuthEapMuTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU timeout."
::= { ccWlanAuthEapEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.12
ccWlanAuthEapMuTxPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU Tx period."
::= { ccWlanAuthEapEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.13
ccWlanAuthEapMuMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU max retries."
::= { ccWlanAuthEapEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.14
ccWlanAuthEapServerTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server timeout."
::= { ccWlanAuthEapEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.15
ccWlanAuthEapServerMaxRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server max retries."
::= { ccWlanAuthEapEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.16
ccWlanAuthEapRadiusAcctMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Accounting Mode."
::= { ccWlanAuthEapEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.17
ccWlanAuthEapRadiusAcctMuTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Accounting MU Timeout."
::= { ccWlanAuthEapEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.18
ccWlanAuthEapRadiusAcctMuRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Accounting MU Retries."
::= { ccWlanAuthEapEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.19
ccWlanAuthEapSyslogMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Logging Mode."
::= { ccWlanAuthEapEntry 19 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.1.1.20
ccWlanAuthEapSyslogSeverIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Syslog Server IP Address."
::= { ccWlanAuthEapEntry 20 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2
ccWlanAuthKerberosTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanAuthKerberosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Kerberos authentication settings for each
WLAN."
::= { ccWlanAuth 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1
ccWlanAuthKerberosEntry OBJECT-TYPE
SYNTAX CcWlanAuthKerberosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanAuthKerberosTable 1 }
CcWlanAuthKerberosEntry ::=
SEQUENCE {
ccWlanAuthKerberosRealmName
DisplayString,
ccWlanAuthKerberosUsername
DisplayString,
ccWlanAuthKerberosPassword
Password,
ccWlanAuthKerberosKdcServerIp1
IpAddress,
ccWlanAuthKerberosKdcPort1
Unsigned32,
ccWlanAuthKerberosKdcServerIp2
IpAddress,
ccWlanAuthKerberosKdcPort2
Unsigned32,
ccWlanAuthKerberosKdcServerIpR
IpAddress,
ccWlanAuthKerberosKdcPortR
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.1
ccWlanAuthKerberosRealmName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Realm name."
::= { ccWlanAuthKerberosEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.2
ccWlanAuthKerberosUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Username."
::= { ccWlanAuthKerberosEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.3
ccWlanAuthKerberosPassword OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password."
::= { ccWlanAuthKerberosEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.4
ccWlanAuthKerberosKdcServerIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary KDC server IP addr."
::= { ccWlanAuthKerberosEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.5
ccWlanAuthKerberosKdcPort1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary KDC port."
::= { ccWlanAuthKerberosEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.6
ccWlanAuthKerberosKdcServerIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Backup KDC server IP addr."
::= { ccWlanAuthKerberosEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.7
ccWlanAuthKerberosKdcPort2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Backup KDC port."
::= { ccWlanAuthKerberosEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.8
ccWlanAuthKerberosKdcServerIpR OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote KDC server IP addr."
::= { ccWlanAuthKerberosEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.2.2.1.9
ccWlanAuthKerberosKdcPortR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote KDC port."
::= { ccWlanAuthKerberosEntry 9 }
-- This group contains encryption settings for all WLANs.
-- 1.3.6.1.4.1.388.11.2.4.5.3
ccWlanCrypto OBJECT IDENTIFIER ::= { ccWlan 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1
ccWlanCryptoWepTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanCryptoWepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WEP encryption settings for each WLAN."
::= { ccWlanCrypto 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1
ccWlanCryptoWepEntry OBJECT-TYPE
SYNTAX CcWlanCryptoWepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanCryptoWepTable 1 }
CcWlanCryptoWepEntry ::=
SEQUENCE {
ccWlanCryptoWepPassKey
Password,
ccWlanCryptoWepKey1
OCTET STRING,
ccWlanCryptoWepKey2
OCTET STRING,
ccWlanCryptoWepKey3
OCTET STRING,
ccWlanCryptoWepKey4
OCTET STRING,
ccWlanCryptoWepKeyToUse
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.1
ccWlanCryptoWepPassKey OBJECT-TYPE
SYNTAX Password (SIZE (4..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pass key.
If this value is written, the four WepKey1..4 will
be overwritten."
::= { ccWlanCryptoWepEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.2
ccWlanCryptoWepKey1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP key #1
exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key)."
::= { ccWlanCryptoWepEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.3
ccWlanCryptoWepKey2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP key #2
exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key)."
::= { ccWlanCryptoWepEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.4
ccWlanCryptoWepKey3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP key #3
exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key)."
::= { ccWlanCryptoWepEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.5
ccWlanCryptoWepKey4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP key #4
exactly 13 octets for WEP-128 (104-bit key);
exactly 5 octets for WEP-64 (40-bit key)."
::= { ccWlanCryptoWepEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.1.1.6
ccWlanCryptoWepKeyToUse OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which WEP key to use."
::= { ccWlanCryptoWepEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2
ccWlanCryptoWpaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanCryptoWpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WPA-TKIP encryption settings for each WLAN."
::= { ccWlanCrypto 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1
ccWlanCryptoWpaEntry OBJECT-TYPE
SYNTAX CcWlanCryptoWpaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanCryptoWpaTable 1 }
CcWlanCryptoWpaEntry ::=
SEQUENCE {
ccWlanCryptoWpaBcastKeyRotation
TruthValue,
ccWlanCryptoWpaKeyRotationInterval
Unsigned32,
ccWlanCryptoWpaKeyToUse
INTEGER,
ccWlanCryptoWpaPassphrase
OCTET STRING,
ccWlanCryptoWpaKey
OCTET STRING
}
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1.1
ccWlanCryptoWpaBcastKeyRotation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use broadcast key rotation."
::= { ccWlanCryptoWpaEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1.2
ccWlanCryptoWpaKeyRotationInterval OBJECT-TYPE
SYNTAX Unsigned32 (300..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast key rotation, (if enabled), occurs every
this many seconds."
::= { ccWlanCryptoWpaEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1.3
ccWlanCryptoWpaKeyToUse OBJECT-TYPE
SYNTAX INTEGER
{
use128bitKey(1),
useAsciiPassPhrase(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which key to use."
::= { ccWlanCryptoWpaEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1.4
ccWlanCryptoWpaPassphrase OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Passphrase."
::= { ccWlanCryptoWpaEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.2.1.5
ccWlanCryptoWpaKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key."
::= { ccWlanCryptoWpaEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3
ccWlanCryptoKeyguardTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanCryptoKeyguardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of KeyGuard-MCM encryption settings for each
WLAN."
::= { ccWlanCrypto 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1
ccWlanCryptoKeyguardEntry OBJECT-TYPE
SYNTAX CcWlanCryptoKeyguardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanCryptoKeyguardTable 1 }
CcWlanCryptoKeyguardEntry ::=
SEQUENCE {
ccWlanCryptoKeyguardPasskey
OCTET STRING,
ccWlanCryptoKeyguardKey1
OCTET STRING,
ccWlanCryptoKeyguardKey2
OCTET STRING,
ccWlanCryptoKeyguardKey3
OCTET STRING,
ccWlanCryptoKeyguardKey4
OCTET STRING,
ccWlanCryptoKeyguardKeyToUse
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.1
ccWlanCryptoKeyguardPasskey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pass key."
::= { ccWlanCryptoKeyguardEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.2
ccWlanCryptoKeyguardKey1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key #1."
::= { ccWlanCryptoKeyguardEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.3
ccWlanCryptoKeyguardKey2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key #2."
::= { ccWlanCryptoKeyguardEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.4
ccWlanCryptoKeyguardKey3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key #3."
::= { ccWlanCryptoKeyguardEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.5
ccWlanCryptoKeyguardKey4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key #4."
::= { ccWlanCryptoKeyguardEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.3.1.6
ccWlanCryptoKeyguardKeyToUse OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which WEP key to use."
::= { ccWlanCryptoKeyguardEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4
ccWlanCryptoWpaTwoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanCryptoWpaTwoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WPA-CCMP encryption settings for each WLAN."
::= { ccWlanCrypto 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1
ccWlanCryptoWpaTwoEntry OBJECT-TYPE
SYNTAX CcWlanCryptoWpaTwoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWlanIndex }
::= { ccWlanCryptoWpaTwoTable 1 }
CcWlanCryptoWpaTwoEntry ::=
SEQUENCE {
ccWlanCryptoWpaTwoBcastKeyRotation
TruthValue,
ccWlanCryptoWpaTwoKeyRotationInterval
Unsigned32,
ccWlanCryptoWpaTwoKeyToUse
INTEGER,
ccWlanCryptoWpaTwoPassphrase
Password,
ccWlanCryptoWpaTwoKey
OCTET STRING,
ccWlanCryptoWpaTwoAllowTkipClient
TruthValue,
ccWlanCryptoWpaTwoFastRoamPreAuth
TruthValue,
ccWlanCryptoWpaTwoFastRoamKeyCache
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.1
ccWlanCryptoWpaTwoBcastKeyRotation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use broadcast key rotation."
::= { ccWlanCryptoWpaTwoEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.2
ccWlanCryptoWpaTwoKeyRotationInterval OBJECT-TYPE
SYNTAX Unsigned32 (300..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast key rotation, (if enabled), occurs every
this many seconds."
::= { ccWlanCryptoWpaTwoEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.3
ccWlanCryptoWpaTwoKeyToUse OBJECT-TYPE
SYNTAX INTEGER
{
useAsciiPassphrase(1),
use128bitKey(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which key to use."
::= { ccWlanCryptoWpaTwoEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.4
ccWlanCryptoWpaTwoPassphrase OBJECT-TYPE
SYNTAX Password (SIZE (8..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Passphrase."
::= { ccWlanCryptoWpaTwoEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.5
ccWlanCryptoWpaTwoKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key."
::= { ccWlanCryptoWpaTwoEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.6
ccWlanCryptoWpaTwoAllowTkipClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WPA2-CCMP Mixed Mode enables WPA2-CCMP and WPA-TKIP Clients
to operate simultaneously on the network. Enabling this
option allows backwards compatiblity for clients that
support WPA-TKIP but do not support WPA2-CCMP."
::= { ccWlanCryptoWpaTwoEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.7
ccWlanCryptoWpaTwoFastRoamPreAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabling this option enables a client associated with one
Access Port to carry out an 802.1x authentication with
another Access Port before it roams over to it. The WS2000
will cache the keying information of the client until it
roams to the new Access Port. This enables the roaming the
client to start sending and receiving data sooner by not
having to do 802.1x authentication after it roams.
Note: This option only works when 802.1x authentication is
enabled for the WLAN. "
::= { ccWlanCryptoWpaTwoEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.3.4.1.8
ccWlanCryptoWpaTwoFastRoamKeyCache OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option enables the WS2000 to use a Pairwise Master Key
(PMK) derived with a client on one Access Port, with the
same client when it roams over to another Access Port. Upon
roaming the client does not have to do 802.1x authentication
and can start sending/receiving data sooner.
Note: This option only works when 802.1x authentication is
enabled for the WLAN. "
::= { ccWlanCryptoWpaTwoEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.4
ccWlanMuAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanMuAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table describing ACLs for allowing or denying,
(depending on default behavior for the WLAN
specified in ccWlanMuAclDefault), MU association with
each WLAN."
::= { ccWlan 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.4.1
ccWlanMuAclEntry OBJECT-TYPE
SYNTAX CcWlanMuAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex, ccWlanMuAclIndex }
::= { ccWlanMuAclTable 1 }
CcWlanMuAclEntry ::=
SEQUENCE {
ccWlanMuAclIndex
Integer32,
ccWlanMuAclStartingMac
PhysAddress,
ccWlanMuAclEndingMac
PhysAddress,
ccWlanMuAclRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.4.5.4.1.1
ccWlanMuAclIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index."
::= { ccWlanMuAclEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.4.1.2
ccWlanMuAclStartingMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting MAC address in a range of addresses."
::= { ccWlanMuAclEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.4.1.3
ccWlanMuAclEndingMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ending MAC address in a range of addresses."
::= { ccWlanMuAclEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.4.1.4
ccWlanMuAclRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { ccWlanMuAclEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.5
ccWlanBwShareMode OBJECT-TYPE
SYNTAX INTEGER
{
off(1),
roundRobin(2),
weightedRoundRobin(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable configures the manner in which
bandwidth is shared among the WLANs. Only in
mode 'weightedRoundRobin' are the ccWlanWeight
values for each WLAN used."
::= { ccWlan 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.6
ccWlanQosMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanQosMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of QOS values."
::= { ccWlan 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.6.1
ccWlanQosMonitorEntry OBJECT-TYPE
SYNTAX CcWlanQosMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWlanIndex, ccPortalIndex }
::= { ccWlanQosMonitorTable 1 }
CcWlanQosMonitorEntry ::=
SEQUENCE {
ccWlanQosMonitorSent
Counter32,
ccWlanQosMonitorDropped
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.6.1.1
ccWlanQosMonitorSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets Sent."
::= { ccWlanQosMonitorEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.6.1.2
ccWlanQosMonitorDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets Dropped."
::= { ccWlanQosMonitorEntry 2 }
-- !!- OID: .100
--
-- Summary of RF statistics for all RF communications
-- from this switch.
--
-- In each table, index 1001 is the roll-up for all RF
-- communications from this switch as a whole.
-- 1.3.6.1.4.1.388.11.2.4.5.100
ccWlanRfSum OBJECT IDENTIFIER ::= { ccWlan 100 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1
ccWlanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes general statistics about
packets sent/recieved via each WLAN on the switch."
::= { ccWlanRfSum 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1
ccWlanStatsEntry OBJECT-TYPE
SYNTAX CcWlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanStatsTable 1 }
CcWlanStatsEntry ::=
SEQUENCE {
ccWlanTxPktsUcast
Counter32,
ccWlanRxPktsUcast
Counter32,
ccWlanRxPktsNUcast
Counter32,
ccWlanTxOctetsUcast
Counter32,
ccWlanRxOctetsUcast
Counter32,
ccWlanRxOctetsNUcast
Counter32,
ccWlanRxUndecryptablePkts
Counter32,
ccWlanLastActivity
TimeTicks
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.1
ccWlanTxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets sent."
::= { ccWlanStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.2
ccWlanRxPktsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast packets received."
::= { ccWlanStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.3
ccWlanRxPktsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
packets received."
::= { ccWlanStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.4
ccWlanTxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets sent."
::= { ccWlanStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.5
ccWlanRxOctetsUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of unicast octets received."
::= { ccWlanStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.6
ccWlanRxOctetsNUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-unicast (broadcast & multicast)
octets received."
::= { ccWlanStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.7
ccWlanRxUndecryptablePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of packets received that could
not be decrypted."
::= { ccWlanStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.1.1.8
ccWlanLastActivity OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A snapshot of the switch's sysUpTime at the time
of the last activity (packet sent or received)."
::= { ccWlanStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2
ccWlanRxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each WLAN on the switch, this table
describes counts of packets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccWlanRfSum 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1
ccWlanRxPktsEntry OBJECT-TYPE
SYNTAX CcWlanRxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanRxPktsTable 1 }
CcWlanRxPktsEntry ::=
SEQUENCE {
ccWlanRxPktsAt1Mb
Counter32,
ccWlanRxPktsAt2Mb
Counter32,
ccWlanRxPktsAt5pt5Mb
Counter32,
ccWlanRxPktsAt6Mb
Counter32,
ccWlanRxPktsAt9Mb
Counter32,
ccWlanRxPktsAt11Mb
Counter32,
ccWlanRxPktsAt12Mb
Counter32,
ccWlanRxPktsAt18Mb
Counter32,
ccWlanRxPktsAt22Mb
Counter32,
ccWlanRxPktsAt24Mb
Counter32,
ccWlanRxPktsAt36Mb
Counter32,
ccWlanRxPktsAt48Mb
Counter32,
ccWlanRxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.1
ccWlanRxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 1 Mb."
::= { ccWlanRxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.2
ccWlanRxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 2 Mb."
::= { ccWlanRxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.3
ccWlanRxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 5.5 Mb."
::= { ccWlanRxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.4
ccWlanRxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 6 Mb."
::= { ccWlanRxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.5
ccWlanRxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 9 Mb."
::= { ccWlanRxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.6
ccWlanRxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 11 Mb."
::= { ccWlanRxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.7
ccWlanRxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 12 Mb."
::= { ccWlanRxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.8
ccWlanRxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 18 Mb."
::= { ccWlanRxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.9
ccWlanRxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 22 Mb."
::= { ccWlanRxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.10
ccWlanRxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 24 Mb."
::= { ccWlanRxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.11
ccWlanRxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 36 Mb."
::= { ccWlanRxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.12
ccWlanRxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 48 Mb."
::= { ccWlanRxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.2.1.13
ccWlanRxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts received at 54 Mb."
::= { ccWlanRxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3
ccWlanTxPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by the switch, this table
describes counts of packets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccWlanRfSum 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1
ccWlanTxPktsEntry OBJECT-TYPE
SYNTAX CcWlanTxPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanTxPktsTable 1 }
CcWlanTxPktsEntry ::=
SEQUENCE {
ccWlanTxPktsAt1Mb
Counter32,
ccWlanTxPktsAt2Mb
Counter32,
ccWlanTxPktsAt5pt5Mb
Counter32,
ccWlanTxPktsAt6Mb
Counter32,
ccWlanTxPktsAt9Mb
Counter32,
ccWlanTxPktsAt11Mb
Counter32,
ccWlanTxPktsAt12Mb
Counter32,
ccWlanTxPktsAt18Mb
Counter32,
ccWlanTxPktsAt22Mb
Counter32,
ccWlanTxPktsAt24Mb
Counter32,
ccWlanTxPktsAt36Mb
Counter32,
ccWlanTxPktsAt48Mb
Counter32,
ccWlanTxPktsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.1
ccWlanTxPktsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 1 Mb."
::= { ccWlanTxPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.2
ccWlanTxPktsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 2 Mb."
::= { ccWlanTxPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.3
ccWlanTxPktsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 5.5 Mb."
::= { ccWlanTxPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.4
ccWlanTxPktsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 6 Mb."
::= { ccWlanTxPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.5
ccWlanTxPktsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 9 Mb."
::= { ccWlanTxPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.6
ccWlanTxPktsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 11 Mb."
::= { ccWlanTxPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.7
ccWlanTxPktsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 12 Mb."
::= { ccWlanTxPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.8
ccWlanTxPktsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 18 Mb."
::= { ccWlanTxPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.9
ccWlanTxPktsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 22 Mb."
::= { ccWlanTxPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.10
ccWlanTxPktsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 24 Mb."
::= { ccWlanTxPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.11
ccWlanTxPktsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 36 Mb."
::= { ccWlanTxPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.12
ccWlanTxPktsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 48 Mb."
::= { ccWlanTxPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.3.1.13
ccWlanTxPktsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts transmitted at 54 Mb."
::= { ccWlanTxPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4
ccWlanRxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each MU serviced by this switch, this table
describes counts of octets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccWlanRfSum 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1
ccWlanRxOctetsEntry OBJECT-TYPE
SYNTAX CcWlanRxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanRxOctetsTable 1 }
CcWlanRxOctetsEntry ::=
SEQUENCE {
ccWlanRxOctetsAt1Mb
Counter32,
ccWlanRxOctetsAt2Mb
Counter32,
ccWlanRxOctetsAt5pt5Mb
Counter32,
ccWlanRxOctetsAt6Mb
Counter32,
ccWlanRxOctetsAt9Mb
Counter32,
ccWlanRxOctetsAt11Mb
Counter32,
ccWlanRxOctetsAt12Mb
Counter32,
ccWlanRxOctetsAt18Mb
Counter32,
ccWlanRxOctetsAt22Mb
Counter32,
ccWlanRxOctetsAt24Mb
Counter32,
ccWlanRxOctetsAt36Mb
Counter32,
ccWlanRxOctetsAt48Mb
Counter32,
ccWlanRxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.1
ccWlanRxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 1 Mb."
::= { ccWlanRxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.2
ccWlanRxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 2 Mb."
::= { ccWlanRxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.3
ccWlanRxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 5.5 Mb."
::= { ccWlanRxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.4
ccWlanRxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 6 Mb."
::= { ccWlanRxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.5
ccWlanRxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 9 Mb."
::= { ccWlanRxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.6
ccWlanRxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 11 Mb."
::= { ccWlanRxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.7
ccWlanRxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 12 Mb."
::= { ccWlanRxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.8
ccWlanRxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 18 Mb."
::= { ccWlanRxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.9
ccWlanRxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 22 Mb."
::= { ccWlanRxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.10
ccWlanRxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 24 Mb."
::= { ccWlanRxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.11
ccWlanRxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 36 Mb."
::= { ccWlanRxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.12
ccWlanRxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 48 Mb."
::= { ccWlanRxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.4.1.13
ccWlanRxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received at 54 Mb."
::= { ccWlanRxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5
ccWlanTxOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each WLAN on this switch, this table
describes counts of octets transmitted at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...)."
::= { ccWlanRfSum 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1
ccWlanTxOctetsEntry OBJECT-TYPE
SYNTAX CcWlanTxOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanTxOctetsTable 1 }
CcWlanTxOctetsEntry ::=
SEQUENCE {
ccWlanTxOctetsAt1Mb
Counter32,
ccWlanTxOctetsAt2Mb
Counter32,
ccWlanTxOctetsAt5pt5Mb
Counter32,
ccWlanTxOctetsAt6Mb
Counter32,
ccWlanTxOctetsAt9Mb
Counter32,
ccWlanTxOctetsAt11Mb
Counter32,
ccWlanTxOctetsAt12Mb
Counter32,
ccWlanTxOctetsAt18Mb
Counter32,
ccWlanTxOctetsAt22Mb
Counter32,
ccWlanTxOctetsAt24Mb
Counter32,
ccWlanTxOctetsAt36Mb
Counter32,
ccWlanTxOctetsAt48Mb
Counter32,
ccWlanTxOctetsAt54Mb
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.1
ccWlanTxOctetsAt1Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 1 Mb."
::= { ccWlanTxOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.2
ccWlanTxOctetsAt2Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 2 Mb."
::= { ccWlanTxOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.3
ccWlanTxOctetsAt5pt5Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 5.5 Mb."
::= { ccWlanTxOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.4
ccWlanTxOctetsAt6Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 6 Mb."
::= { ccWlanTxOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.5
ccWlanTxOctetsAt9Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 9 Mb."
::= { ccWlanTxOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.6
ccWlanTxOctetsAt11Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 11 Mb."
::= { ccWlanTxOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.7
ccWlanTxOctetsAt12Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 12 Mb."
::= { ccWlanTxOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.8
ccWlanTxOctetsAt18Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 18 Mb."
::= { ccWlanTxOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.9
ccWlanTxOctetsAt22Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 22 Mb."
::= { ccWlanTxOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.10
ccWlanTxOctetsAt24Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 24 Mb."
::= { ccWlanTxOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.11
ccWlanTxOctetsAt36Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 36 Mb."
::= { ccWlanTxOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.12
ccWlanTxOctetsAt48Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 48 Mb."
::= { ccWlanTxOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.5.1.13
ccWlanTxOctetsAt54Mb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted at 54 Mb."
::= { ccWlanTxOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6
ccWlanTxRetriesPktsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanTxRetriesPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each WLAN on the switch, this table describes
counts of the number of packets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccWlanRfSum 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1
ccWlanTxRetriesPktsEntry OBJECT-TYPE
SYNTAX CcWlanTxRetriesPktsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanTxRetriesPktsTable 1 }
CcWlanTxRetriesPktsEntry ::=
SEQUENCE {
ccWlanTxRetriesPktsNone
Counter32,
ccWlanTxRetriesPkts01
Counter32,
ccWlanTxRetriesPkts02
Counter32,
ccWlanTxRetriesPkts03
Counter32,
ccWlanTxRetriesPkts04
Counter32,
ccWlanTxRetriesPkts05
Counter32,
ccWlanTxRetriesPkts06
Counter32,
ccWlanTxRetriesPkts07
Counter32,
ccWlanTxRetriesPkts08
Counter32,
ccWlanTxRetriesPkts09
Counter32,
ccWlanTxRetriesPkts10
Counter32,
ccWlanTxRetriesPkts11
Counter32,
ccWlanTxRetriesPkts12
Counter32,
ccWlanTxRetriesPkts13
Counter32,
ccWlanTxRetriesPkts14
Counter32,
ccWlanTxRetriesPkts15
Counter32,
ccWlanTxRetriesPktsFailed
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.1
ccWlanTxRetriesPktsNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with no retries."
::= { ccWlanTxRetriesPktsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.2
ccWlanTxRetriesPkts01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 1 retries."
::= { ccWlanTxRetriesPktsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.3
ccWlanTxRetriesPkts02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 2 retries."
::= { ccWlanTxRetriesPktsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.4
ccWlanTxRetriesPkts03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 3 retries."
::= { ccWlanTxRetriesPktsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.5
ccWlanTxRetriesPkts04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 4 retries."
::= { ccWlanTxRetriesPktsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.6
ccWlanTxRetriesPkts05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 5 retries."
::= { ccWlanTxRetriesPktsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.7
ccWlanTxRetriesPkts06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 6 retries."
::= { ccWlanTxRetriesPktsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.8
ccWlanTxRetriesPkts07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 7 retries."
::= { ccWlanTxRetriesPktsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.9
ccWlanTxRetriesPkts08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 8 retries."
::= { ccWlanTxRetriesPktsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.10
ccWlanTxRetriesPkts09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 9 retries."
::= { ccWlanTxRetriesPktsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.11
ccWlanTxRetriesPkts10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 10 retries."
::= { ccWlanTxRetriesPktsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.12
ccWlanTxRetriesPkts11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 11 retries."
::= { ccWlanTxRetriesPktsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.13
ccWlanTxRetriesPkts12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 12 retries."
::= { ccWlanTxRetriesPktsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.14
ccWlanTxRetriesPkts13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 13 retries."
::= { ccWlanTxRetriesPktsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.15
ccWlanTxRetriesPkts14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 14 retries."
::= { ccWlanTxRetriesPktsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.16
ccWlanTxRetriesPkts15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts successfully transmitted with exactly 15 retries."
::= { ccWlanTxRetriesPktsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.6.1.17
ccWlanTxRetriesPktsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of pkts that never were successfully
transmitted to because the max retry count was exceeded."
::= { ccWlanTxRetriesPktsEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7
ccWlanTxRetriesOctetsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For each WLAN on the switch, this table describes
counts of the number of octets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up)."
::= { ccWlanRfSum 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1
ccWlanTxRetriesOctetsEntry OBJECT-TYPE
SYNTAX CcWlanTxRetriesOctetsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanTxRetriesOctetsTable 1 }
CcWlanTxRetriesOctetsEntry ::=
SEQUENCE {
ccWlanTxRetriesOctetsNone
Counter32,
ccWlanTxRetriesOctets01
Counter32,
ccWlanTxRetriesOctets02
Counter32,
ccWlanTxRetriesOctets03
Counter32,
ccWlanTxRetriesOctets04
Counter32,
ccWlanTxRetriesOctets05
Counter32,
ccWlanTxRetriesOctets06
Counter32,
ccWlanTxRetriesOctets07
Counter32,
ccWlanTxRetriesOctets08
Counter32,
ccWlanTxRetriesOctets09
Counter32,
ccWlanTxRetriesOctets10
Counter32,
ccWlanTxRetriesOctets11
Counter32,
ccWlanTxRetriesOctets12
Counter32,
ccWlanTxRetriesOctets13
Counter32,
ccWlanTxRetriesOctets14
Counter32,
ccWlanTxRetriesOctets15
Counter32,
ccWlanTxRetriesOctetsFailed
Counter32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.1
ccWlanTxRetriesOctetsNone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with no retries."
::= { ccWlanTxRetriesOctetsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.2
ccWlanTxRetriesOctets01 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 1 retries."
::= { ccWlanTxRetriesOctetsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.3
ccWlanTxRetriesOctets02 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 2 retries."
::= { ccWlanTxRetriesOctetsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.4
ccWlanTxRetriesOctets03 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 3 retries."
::= { ccWlanTxRetriesOctetsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.5
ccWlanTxRetriesOctets04 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 4 retries."
::= { ccWlanTxRetriesOctetsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.6
ccWlanTxRetriesOctets05 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 5 retries."
::= { ccWlanTxRetriesOctetsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.7
ccWlanTxRetriesOctets06 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 6 retries."
::= { ccWlanTxRetriesOctetsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.8
ccWlanTxRetriesOctets07 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 7 retries."
::= { ccWlanTxRetriesOctetsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.9
ccWlanTxRetriesOctets08 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 8 retries."
::= { ccWlanTxRetriesOctetsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.10
ccWlanTxRetriesOctets09 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 9 retries."
::= { ccWlanTxRetriesOctetsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.11
ccWlanTxRetriesOctets10 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 10 retries."
::= { ccWlanTxRetriesOctetsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.12
ccWlanTxRetriesOctets11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 11 retries."
::= { ccWlanTxRetriesOctetsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.13
ccWlanTxRetriesOctets12 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 12 retries."
::= { ccWlanTxRetriesOctetsEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.14
ccWlanTxRetriesOctets13 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 13 retries."
::= { ccWlanTxRetriesOctetsEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.15
ccWlanTxRetriesOctets14 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 14 retries."
::= { ccWlanTxRetriesOctetsEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.16
ccWlanTxRetriesOctets15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets successfully transmitted with exactly 15 retries."
::= { ccWlanTxRetriesOctetsEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.7.1.17
ccWlanTxRetriesOctetsFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets that never were successfully
transmitted to because the max retry count was exceeded."
::= { ccWlanTxRetriesOctetsEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8
ccWlanSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes statistics about RSSI, Signal, Noise,
and SNR for packets recieved via each WLAN on the switch."
::= { ccWlanRfSum 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1
ccWlanSigStatsEntry OBJECT-TYPE
SYNTAX CcWlanSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanSigStatsTable 1 }
CcWlanSigStatsEntry ::=
SEQUENCE {
ccWlanSigStatsNumPkts
Counter32,
ccWlanSigStatsSignalBest
Integer32,
ccWlanSigStatsSignalWorst
Integer32,
ccWlanSigStatsSignalSum
Integer32,
ccWlanSigStatsSignalSumSquares
Counter64,
ccWlanSigStatsNoiseBest
Integer32,
ccWlanSigStatsNoiseWorst
Integer32,
ccWlanSigStatsNoiseSum
Integer32,
ccWlanSigStatsNoiseSumSquares
Counter64,
ccWlanSigStatsSnrBest
Integer32,
ccWlanSigStatsSnrWorst
Integer32,
ccWlanSigStatsSnrSum
Integer32,
ccWlanSigStatsSnrSumSquares
Counter64
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.1
ccWlanSigStatsNumPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total packets received included in
all the other counters reported in this row."
::= { ccWlanSigStatsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.2
ccWlanSigStatsSignalBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Signal value seen so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to -500dBm."
::= { ccWlanSigStatsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.3
ccWlanSigStatsSignalWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Signal value seen so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to 500dBm."
::= { ccWlanSigStatsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.4
ccWlanSigStatsSignalSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets received.
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal."
::= { ccWlanSigStatsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.5
ccWlanSigStatsSignalSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Signal value calculated
for packets received.
Unlike _SignalSum, this value is never negative, since
the square of a negative number is a positive."
::= { ccWlanSigStatsEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.6
ccWlanSigStatsNoiseBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best Noise value seen so far.
(Remember that -80dBm Noise is better than -70dBm).
This value is initialized to 500dBm."
::= { ccWlanSigStatsEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.7
ccWlanSigStatsNoiseWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst Noise value seen so far.
(Remember that -50dBm Noise is worse than -60dBm).
This value is initialized to -500dBm."
::= { ccWlanSigStatsEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.8
ccWlanSigStatsNoiseSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all Noise values calculated by the
switch (using reported RSSI values), for packets.
Like _SignalSum, this value is normally a negative value."
::= { ccWlanSigStatsEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.9
ccWlanSigStatsNoiseSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each Noise value calculated
for packets received.
As with _SignalSumSquares, this value is never negative."
::= { ccWlanSigStatsEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.10
ccWlanSigStatsSnrBest OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The best SNR value seen so far.
(Remember that +30dBm SNR is better than +20dBm).
This value is initialized to -500dB."
::= { ccWlanSigStatsEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.11
ccWlanSigStatsSnrWorst OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The worst SNR value seen so far.
(Remember that +10dBm SNR is worse than +20dBm).
This value is initialized to 500dB."
::= { ccWlanSigStatsEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.12
ccWlanSigStatsSnrSum OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A running sum of all SNR values calculated by the
switch (using reported RSSI values), for packets received.
Unlike _Signal and _Noise, this value is never negative."
::= { ccWlanSigStatsEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.8.1.13
ccWlanSigStatsSnrSumSquares OBJECT-TYPE
SYNTAX Counter64
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sum of the squares of each SNR value calculated
for packets received.
This value is never negative."
::= { ccWlanSigStatsEntry 13 }
-- The switch roll-up values are reported at entry/instance
-- 1001, as with the other ccWlanRfSum tables. Note, however,
-- that the switch reports very few of the values that WLANs
-- report, and will return NO-SUCH for those values on GET,
-- and will 'skip-over' those columns for GET-NEXT.
-- 1.3.6.1.4.1.388.11.2.4.5.100.9
ccWlanSumStatsShortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the SHORT window for
each WLAN."
::= { ccWlanRfSum 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1
ccWlanSumStatsShortEntry OBJECT-TYPE
SYNTAX CcWlanSumStatsShortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanSumStatsShortTable 1 }
CcWlanSumStatsShortEntry ::=
SEQUENCE {
ccWlanSumStatsShortTimestamp
TimeTicks,
ccWlanSumStatsShortNumPkts
Unsigned32,
ccWlanSumStatsShortPktsPerSec100
ScaleBy100,
ccWlanSumStatsShortPktsPerSecTx100
ScaleBy100,
ccWlanSumStatsShortPktsPerSecRx100
ScaleBy100,
ccWlanSumStatsShortThroughput
Unsigned32,
ccWlanSumStatsShortThroughputTx
Unsigned32,
ccWlanSumStatsShortThroughputRx
Unsigned32,
ccWlanSumStatsShortAvgBitSpeed
Unsigned32,
ccWlanSumStatsShortAvgMuSignal
Integer32,
ccWlanSumStatsShortAvgMuNoise
Integer32,
ccWlanSumStatsShortAvgMuSnr
Integer32,
ccWlanSumStatsShortPp10kNUcastPkts
PartsPer10k,
ccWlanSumStatsShortPp10kTxWithRetries
PartsPer10k,
ccWlanSumStatsShortPp10kDropped
PartsPer10k,
ccWlanSumStatsShortTxAvgRetries100
ScaleBy100,
ccWlanSumStatsShortPp10kRxUndecrypt
PartsPer10k,
ccWlanSumStatsShortTotalMus
Unsigned32,
ccWlanSumStatsShortSkip1
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.1
ccWlanSumStatsShortTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime as of the END of the 'window' of
time that this entry of values represents."
::= { ccWlanSumStatsShortEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.2
ccWlanSumStatsShortNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets used to calculate the statistics in
this window."
::= { ccWlanSumStatsShortEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.3
ccWlanSumStatsShortPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccWlanSumStatsShortEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.4
ccWlanSumStatsShortPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccWlanSumStatsShortEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.5
ccWlanSumStatsShortPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100."
::= { ccWlanSumStatsShortEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.6
ccWlanSumStatsShortThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)."
::= { ccWlanSumStatsShortEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.7
ccWlanSumStatsShortThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries)."
::= { ccWlanSumStatsShortEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.8
ccWlanSumStatsShortThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual number of bits RX over the window,
divided by the number of seconds in the window."
::= { ccWlanSumStatsShortEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.9
ccWlanSumStatsShortAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/received."
::= { ccWlanSumStatsShortEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.10
ccWlanSumStatsShortAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all signal values over the window.
NOTE: dBm are normally negative. Here the NEGATIVE values
are reported as POSITIVE values. PO"
::= { ccWlanSumStatsShortEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.11
ccWlanSumStatsShortAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all noise values over the window."
::= { ccWlanSumStatsShortEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.12
ccWlanSumStatsShortAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all SNR values over the window."
::= { ccWlanSumStatsShortEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.13
ccWlanSumStatsShortPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of packets that were NOT unicast.
Expressed as parts-per-10000."
::= { ccWlanSumStatsShortEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.14
ccWlanSumStatsShortPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of TX packets that experienced one or more retries.
Expressed as parts-per-10000."
::= { ccWlanSumStatsShortEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.15
ccWlanSumStatsShortPp10kDropped OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets dropped divided by packets sent. Dropped here
means dropped intentionally due to the appropriate QoS
queue being full. Other reasons for dropped packets are
not counted in this ratio."
::= { ccWlanSumStatsShortEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.16
ccWlanSumStatsShortTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00)."
::= { ccWlanSumStatsShortEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.17
ccWlanSumStatsShortPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratio of RX packets that were undecryptable.
Expressed as parts-per-10000."
::= { ccWlanSumStatsShortEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.18
ccWlanSumStatsShortTotalMus OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "number of MUs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets used to calculate the statistics in
this window for all MUs associated with WLAN."
::= { ccWlanSumStatsShortEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.9.1.19
ccWlanSumStatsShortSkip1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Not relevant for WS2000 2.0."
::= { ccWlanSumStatsShortEntry 19 }
-- place-holder so _Pp10kDropped falls at same OID for
-- both Portal and Wlan summary tables.
--
-- The switch roll-up values are reported at entry/instance
-- 1001, as with the other ccWlanRfSum tables. Note, however,
-- that the switch reports very few of the values that WLANs
-- report, and will return NO-SUCH for those values on GET,
-- and will 'skip-over' those columns for GET-NEXT.
-- 1.3.6.1.4.1.388.11.2.4.5.100.10
ccWlanSumStatsLongTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWlanSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Averages and rates calculated over the LONG window for
each WLAN.
(Refer to ccWlanSumStatsShortTable for descriptions)."
::= { ccWlanRfSum 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1
ccWlanSumStatsLongEntry OBJECT-TYPE
SYNTAX CcWlanSumStatsLongEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWlanIndex }
::= { ccWlanSumStatsLongTable 1 }
CcWlanSumStatsLongEntry ::=
SEQUENCE {
ccWlanSumStatsLongTimestamp
TimeTicks,
ccWlanSumStatsLongNumPkts
Unsigned32,
ccWlanSumStatsLongPktsPerSec100
ScaleBy100,
ccWlanSumStatsLongPktsPerSecTx100
ScaleBy100,
ccWlanSumStatsLongPktsPerSecRx100
ScaleBy100,
ccWlanSumStatsLongThroughput
Unsigned32,
ccWlanSumStatsLongThroughputTx
Unsigned32,
ccWlanSumStatsLongThroughputRx
Unsigned32,
ccWlanSumStatsLongAvgBitSpeed
Unsigned32,
ccWlanSumStatsLongAvgMuSignal
Integer32,
ccWlanSumStatsLongAvgMuNoise
Integer32,
ccWlanSumStatsLongAvgMuSnr
Integer32,
ccWlanSumStatsLongPp10kNUcastPkts
PartsPer10k,
ccWlanSumStatsLongPp10kTxWithRetries
PartsPer10k,
ccWlanSumStatsLongPp10kDropped
PartsPer10k,
ccWlanSumStatsLongTxAvgRetries100
ScaleBy100,
ccWlanSumStatsLongPp10kRxUndecrypt
PartsPer10k,
ccWlanSumStatsLongTotalMus
Unsigned32,
ccWlanSumStatsLongSkip1
Integer32
}
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.1
ccWlanSumStatsLongTimestamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 1 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.2
ccWlanSumStatsLongNumPkts OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 2 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.3
ccWlanSumStatsLongPktsPerSec100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 3 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.4
ccWlanSumStatsLongPktsPerSecTx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 4 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.5
ccWlanSumStatsLongPktsPerSecRx100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "pkts per sec x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 5 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.6
ccWlanSumStatsLongThroughput OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 6 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.7
ccWlanSumStatsLongThroughputTx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 7 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.8
ccWlanSumStatsLongThroughputRx OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 8 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.9
ccWlanSumStatsLongAvgBitSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 9 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.10
ccWlanSumStatsLongAvgMuSignal OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 10 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.11
ccWlanSumStatsLongAvgMuNoise OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 11 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.12
ccWlanSumStatsLongAvgMuSnr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 12 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.13
ccWlanSumStatsLongPp10kNUcastPkts OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 13 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.14
ccWlanSumStatsLongPp10kTxWithRetries OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 14 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.15
ccWlanSumStatsLongPp10kDropped OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 15 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.16
ccWlanSumStatsLongTxAvgRetries100 OBJECT-TYPE
SYNTAX ScaleBy100
UNITS "average x100"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 16 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.17
ccWlanSumStatsLongPp10kRxUndecrypt OBJECT-TYPE
SYNTAX PartsPer10k
UNITS "parts-per-10000"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 17 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.18
ccWlanSumStatsLongTotalMus OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "number of MUs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ccWlanSumStatsLongEntry 18 }
-- 1.3.6.1.4.1.388.11.2.4.5.100.10.1.19
ccWlanSumStatsLongSkip1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Description."
::= { ccWlanSumStatsLongEntry 19 }
-- place-holder so _Pp10kDropped falls at same OID for
-- both Portal and Wlan summary tables.
--
-- 1.3.6.1.4.1.388.11.2.5
ccSwitch OBJECT IDENTIFIER ::= { ws2k 5 }
-- 1.3.6.1.4.1.388.11.2.5.1
ccWan OBJECT IDENTIFIER ::= { ccSwitch 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.1
ccWanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WAN interfaces.
There is only one WAN interface on the WS2000, but we
show the WAN interface in a table for consistancy and
to have an entry to point to from other tables, (such
as the MatrixSrc and MatrixDest tables)."
::= { ccWan 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1
ccWanEntry OBJECT-TYPE
SYNTAX CcWanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanIndex }
::= { ccWanTable 1 }
CcWanEntry ::=
SEQUENCE {
ccWanIndex
Integer32,
ccWanDhcpEnable
TruthValue,
ccWanDhcpIpAddr
IpAddress,
ccWanDhcpSubnetMask
IpAddress,
ccWanDhcpDefaultGateway
IpAddress,
ccWanDhcpPrimaryDnsServer
IpAddress,
ccWanDhcpSecondaryDnsServer
IpAddress,
ccWanSubnetMask
IpAddress,
ccWanDefaultGateway
IpAddress,
ccWanPrimaryDnsServer
IpAddress,
ccWanSecondaryDnsServer
IpAddress
}
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.1
ccWanIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index."
::= { ccWanEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.2
ccWanDhcpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable DHCP on this WAN interface.
"
::= { ccWanEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.3
ccWanDhcpIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address obtained via DHCP.
If DHCP is disabled or if DHCP has not yet obtained
values, this value will be 0.0.0.0."
::= { ccWanEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.4
ccWanDhcpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask address obtained via DHCP.
If DHCP is disabled or if DHCP has not yet obtained
values, this value will be 0.0.0.0."
::= { ccWanEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.5
ccWanDhcpDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default gateway obtained via DHCP.
If DHCP is disabled or if DHCP has not yet obtained
values, this value will be 0.0.0.0."
::= { ccWanEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.6
ccWanDhcpPrimaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary DNS server obtained via DHCP.
If DHCP is disabled or if DHCP has not yet obtained
values, this value will be 0.0.0.0."
::= { ccWanEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.7
ccWanDhcpSecondaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary DNS server obtained via DHCP.
If DHCP is disabled or if DHCP has not yet obtained
values, this value will be 0.0.0.0."
::= { ccWanEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.8
ccWanSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask to use if DHCP is not enabled.
If DHCP is enabled, this value is still writeable,
but is not used."
::= { ccWanEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.9
ccWanDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default gateway to use if DHCP is not enabled.
If DHCP is enabled, this value is still writeable,
but is not used."
::= { ccWanEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.10
ccWanPrimaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary DNS server to use if DHCP is not enabled.
If DHCP is enabled, this value is still writeable,
but is not used."
::= { ccWanEntry 10 }
-- 1.3.6.1.4.1.388.11.2.5.1.1.1.11
ccWanSecondaryDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The secondary DNS server to use if DHCP is not
enabled.
If DHCP is enabled, this value is still writeable,
but is not used."
::= { ccWanEntry 11 }
-- 1.3.6.1.4.1.388.11.2.5.1.2
ccWanPppoeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanPppoeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PPPoE settings for WAN interfaces."
::= { ccWan 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1
ccWanPppoeEntry OBJECT-TYPE
SYNTAX CcWanPppoeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanIndex }
::= { ccWanPppoeTable 1 }
CcWanPppoeEntry ::=
SEQUENCE {
ccWanPppoeEnable
StaticRowEnable,
ccWanPppoeUsername
DisplayString,
ccWanPppoePassword
DisplayString,
ccWanPppoeKeepAlive
TruthValue,
ccWanPppoeIdleTime
Unsigned32,
ccWanPppoeAuthType
INTEGER
}
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.1
ccWanPppoeEnable OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable PPPoE for this WAN interface."
::= { ccWanPppoeEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.2
ccWanPppoeUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE username."
::= { ccWanPppoeEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.3
ccWanPppoePassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE password.
When this value is read, the switch returns a
DisplayString of zero length."
::= { ccWanPppoeEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.4
ccWanPppoeKeepAlive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE keep-alive."
::= { ccWanPppoeEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.5
ccWanPppoeIdleTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE idle time."
::= { ccWanPppoeEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.2.1.6
ccWanPppoeAuthType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
papOrChap(2),
pap(3),
chap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PPPoE authentication type.
If no bits are set, no authentication is done.
If more than one bit is set, any of the selected
methods may be used by the switch."
::= { ccWanPppoeEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.3
ccWanIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IP addresses for the given WAN interface.
Up to 8 IP addresses per WAN interface."
::= { ccWan 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.3.1
ccWanIpAddrEntry OBJECT-TYPE
SYNTAX CcWanIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanIndex, ccWanIpAddrIndex }
::= { ccWanIpAddrTable 1 }
CcWanIpAddrEntry ::=
SEQUENCE {
ccWanIpAddrIndex
Integer32,
ccWanIpAddrEnable
StaticRowEnable,
ccWanIpAddr
IpAddress
}
-- 1.3.6.1.4.1.388.11.2.5.1.3.1.1
ccWanIpAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index 1..8 of entries for each WAN interface."
::= { ccWanIpAddrEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.3.1.2
ccWanIpAddrEnable OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this entry."
::= { ccWanIpAddrEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.3.1.3
ccWanIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WAN IP address."
::= { ccWanIpAddrEntry 3 }
-- Variables to control the Firewall function.
-- 1.3.6.1.4.1.388.11.2.5.1.4
ccWanFirewall OBJECT IDENTIFIER ::= { ccWan 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.1
ccWanFirewallGlobalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable enables/disables the global state of the
firewall. Note that if the firewall function is disabled,
NAT, VPN, content filtering and subnet access are also
disabled.
(Disabling all these functions would only be useful in
using the WS2000 in an existing network topology).
Factory-default state is TRUE."
::= { ccWanFirewall 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.2
ccWanFirewallTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanFirewallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Firewall attacks that can be enabled/disabled."
::= { ccWanFirewall 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.2.1
ccWanFirewallEntry OBJECT-TYPE
SYNTAX CcWanFirewallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanIndex }
::= { ccWanFirewallTable 1 }
CcWanFirewallEntry ::=
SEQUENCE {
ccWanFirewallIndex
INTEGER,
ccWanFirewallDescription
DisplayString,
ccWanFirewallAlwaysEnabled
TruthValue,
ccWanFirewallEnable
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.5.1.4.2.1.1
ccWanFirewallIndex OBJECT-TYPE
SYNTAX INTEGER
{
fwIpSpoofing(1),
fwPingOfDeath(2),
fwLandAttack(3),
fwReassemblyAttack(4),
fwSynFloodAttack(5),
fwSourceRouting(6),
fwWinnukeAttack(7),
fwFtpBounceAttack(8),
fwIpUnalignedTimestamp(9),
fwIpSequenceNumberPrediction(10),
fwMimeFloodAttack(11)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index, but with explicitly enumerated values."
::= { ccWanFirewallEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.2.1.2
ccWanFirewallDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Short description of the type of attack."
::= { ccWanFirewallEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.2.1.3
ccWanFirewallAlwaysEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A few of the firewall algorithms can NOT be disabled.
If this value is TRUE, this is one of those algorithms.
Any attempt to set ccWanFwEnable to FALSE will result in
a BAD-VALUE error."
::= { ccWanFirewallEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.2.1.4
ccWanFirewallEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to TRUE to enable this type of firewall check."
::= { ccWanFirewallEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.3
ccWanFirewallMimeFloodMaxHeaderLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mime flood attack check max header length."
::= { ccWanFirewall 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.4
ccWanFirewallMimeFloodMaxHeaders OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mime flood attack check max headers."
::= { ccWanFirewall 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.4.5
ccWanNatTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout value for NAT."
::= { ccWanFirewall 5 }
-- Values regarding NAT functions.
-- 1.3.6.1.4.1.388.11.2.5.1.5
ccWanNat OBJECT IDENTIFIER ::= { ccWan 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.1
ccWanNatLowestUnusedSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Since the ccWanNatTable is actually
implemented as a single list of entries,
the second index of the ccWanNatTable,
(ccWanNatIndex), must be unique across all
ccWanNatTable entries. This scalar tells
the network management software the
lowest unused value that is available to be
used for ccWanNatIndex, when creating a
new ccWanNatTable entry.
"
::= { ccWanNat 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2
ccWanNatTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanNatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of NAT mappings for each IP address assigned to
each WAN interface.
(The WS2000 currently only has one WAN interface, but
all MIBs are designed for the possibility of multiple
WAN interfaces)."
::= { ccWanNat 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1
ccWanNatEntry OBJECT-TYPE
SYNTAX CcWanNatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanNatIndex, ccWanNatWanIpAddress }
::= { ccWanNatTable 1 }
CcWanNatEntry ::=
SEQUENCE {
ccWanNatIndex
Integer32,
ccWanNatWanIpAddress
IpAddress,
ccWanNatType
INTEGER,
ccWanNat1to1IpAddr
IpAddress,
ccWanNatInboundDefaultEna
TruthValue,
ccWanNatInboundDefaultIp
IpAddress
}
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.1
ccWanNatIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index matching the simple index in the
ccWanTable."
::= { ccWanNatEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.2
ccWanNatWanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"One, (of possibly several), IP addresses assigned to
this WAN interface. One entries in this table will
appear for each matching entry in the
ccWanIpAddrTable."
::= { ccWanNatEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.3
ccWanNatType OBJECT-TYPE
SYNTAX INTEGER
{
natNone(1),
nat1to1(2),
nat1toMany(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the NAT type.
Only if 'nat1to1' is selected is the
ccWanNat1to1IpAddr value is used. In such a case,
any corresponding entries in the ccWanNatInboundTable
and the ccWanNatOutboundTable are ignored.
If 'none' is selected, all the above mentioned values
are ignored.
If '1toMany' is selected, the ccWanNat1to1IpAddr
value is ignored, but entries, (if any), in the two
tables are relevant."
::= { ccWanNatEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.4
ccWanNat1to1IpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address to use for outbound 1-to-1 mapping.
Only used if ccWanNatType is '1to1'."
::= { ccWanNatEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.5
ccWanNatInboundDefaultEna OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set, any port that is NOT found in the
ccWanNatInboundTable entries is forwarded to the
IP addr specified by ccWanNatInboundDefaultIp."
::= { ccWanNatEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.2.1.6
ccWanNatInboundDefaultIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP addr to send ports that do not match any entry in
the ccWanNatInboundTable."
::= { ccWanNatEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3
ccWanNatInboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanNatInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of inbound NAT mappings for IP addresses on
WAN interfaces that are set to ccWanNatType of
'1to1' or '1toMany'."
::= { ccWanNat 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1
ccWanNatInboundEntry OBJECT-TYPE
SYNTAX CcWanNatInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanNatIndex, ccWanNatWanIpAddress, ccWanNatInboundIndex }
::= { ccWanNatInboundTable 1 }
CcWanNatInboundEntry ::=
SEQUENCE {
ccWanNatInboundIndex
Integer32,
ccWanNatInboundName
DisplayString,
ccWanNatInboundTransport
INTEGER,
ccWanNatInboundStartPort
Integer32,
ccWanNatInboundEndPort
Integer32,
ccWanNatInboundIpAddr
IpAddress,
ccWanNatInboundTranslationPort
Integer32,
ccWanNatInboundRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.1
ccWanNatInboundIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A given IP address on a given WAN interface may have
many inbound NAT mappings. This (3rd) index numbers
those many mappings."
::= { ccWanNatInboundEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.2
ccWanNatInboundName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the inbound mapping."
::= { ccWanNatInboundEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.3
ccWanNatInboundTransport OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
tcp(2),
udp(3),
icmp(4),
ah(5),
esp(6),
gre(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transport for which this mapping applies."
::= { ccWanNatInboundEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.4
ccWanNatInboundStartPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Low-end of the port range."
::= { ccWanNatInboundEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.5
ccWanNatInboundEndPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"High-end of the port range."
::= { ccWanNatInboundEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.6
ccWanNatInboundIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address to map to."
::= { ccWanNatInboundEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.7
ccWanNatInboundTranslationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ccWanNatInboundEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.3.1.8
ccWanNatInboundRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Simple row status."
::= { ccWanNatInboundEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.4
ccWanNatOutboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanNatOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of outbound NAT mappings for IP addresses on
WAN interfaces that are set to ccWanNatType of
'1toMany'."
::= { ccWanNat 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.4.1
ccWanNatOutboundEntry OBJECT-TYPE
SYNTAX CcWanNatOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccWanNatIndex, ccWanNatWanIpAddress, ccWanNatOutboundSubnetIndex }
::= { ccWanNatOutboundTable 1 }
CcWanNatOutboundEntry ::=
SEQUENCE {
ccWanNatOutboundSubnetIndex
Integer32,
ccWanNatOutboundEnable
INTEGER,
ccWanNatOutboundPossibleIpAddr
MultiPointer63,
ccWanNatOutboundIpAddr
SinglePointer
}
-- 1.3.6.1.4.1.388.11.2.5.1.5.4.1.1
ccWanNatOutboundSubnetIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A different mapping can be set for each subnet. This
(3rd) index specifies the subnet.
This index is the same value for a given subnet as in
the ccLanTable."
::= { ccWanNatOutboundEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.4.1.2
ccWanNatOutboundEnable OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Outbound entry."
::= { ccWanNatOutboundEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.4.1.3
ccWanNatOutboundPossibleIpAddr OBJECT-TYPE
SYNTAX MultiPointer63
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multi-bit-mask-pointer points to every IP
address in the ccWanIpAddrTable that is a valid
outbound NAT mapping for this subnet.
Setting this value to all 0s effectively
disables this NAT mapping."
::= { ccWanNatOutboundEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.5.4.1.4
ccWanNatOutboundIpAddr OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value points to the ccWanIpAddrTable entry that
has been selected for the outbound NAT mapping."
::= { ccWanNatOutboundEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.6
ccWanVpn OBJECT IDENTIFIER ::= { ccWan 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4
ccWanVpnTunnelConfig OBJECT IDENTIFIER ::= { ccWanVpn 4 }
-- Tables used to configure VPNs on this switch.
--
-- Since there are so many settings for each such tunnel,
-- the values have been divided into three tables. The
-- second two tables AUGMENT the first.
--
-- Since the number of values to create a VPN that must be
-- SET exceed that which can fit in a single packet, a true
-- RowStatus is used, (not the AbbrevRowStatus). Given this,
-- default values are specified for each item.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1
ccWanVpnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanVpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VPN entries."
::= { ccWanVpnTunnelConfig 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1
ccWanVpnEntry OBJECT-TYPE
SYNTAX CcWanVpnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWanVpnIndex }
::= { ccWanVpnTable 1 }
CcWanVpnEntry ::=
SEQUENCE {
ccWanVpnIndex
INTEGER,
ccWanVpnName
DisplayString,
ccWanVpnLocalSubnet
SinglePointer,
ccWanVpnLocalWanIp
SinglePointer,
ccWanVpnRemoteSubnet
IpAddress,
ccWanVpnRemoteSubnetMask
IpAddress,
ccWanVpnRemoteGateway
IpAddress,
ccWanVpnKeyExchange
INTEGER,
ccWanVpnRowStatus
RowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.1
ccWanVpnIndex OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccWanVpnEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.2
ccWanVpnName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of VPN tunnel."
::= { ccWanVpnEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.3
ccWanVpnLocalSubnet OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Points to a ccSubnetTable entry. 1-LAN1, 2-LAN2, 3-WAN"
::= { ccWanVpnEntry 3 }
-- ??-India: please provide a defval??
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.4
ccWanVpnLocalWanIp OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Points to a ccWanIpAddr entry."
::= { ccWanVpnEntry 4 }
-- ??-India: please provide a defval??
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.5
ccWanVpnRemoteSubnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP addr of the remote subnet."
DEFVAL { '00000000'h }
::= { ccWanVpnEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.6
ccWanVpnRemoteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask for remote subnet."
DEFVAL { '00000000'h }
::= { ccWanVpnEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.7
ccWanVpnRemoteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway IP addr for the remote subnet."
DEFVAL { '00000000'h }
::= { ccWanVpnEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.8
ccWanVpnKeyExchange OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
automatic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects manual or automatic key exchange mechanism."
DEFVAL { manual }
::= { ccWanVpnEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.1.1.9
ccWanVpnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to create/destroy rows."
::= { ccWanVpnEntry 9 }
-- Note that unlike so many other WS2000 tables, this is NOT
-- an abbreviated RowStatus. A full RowStatus is needed in
-- order to have the ability to create a new row with status
-- of UnderCreation, so that the multitude of columns can be
-- filled-in before Activation.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2
ccWanVpnKeyManualTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanVpnKeyManualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Manual Key Setting entries."
::= { ccWanVpnTunnelConfig 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1
ccWanVpnKeyManualEntry OBJECT-TYPE
SYNTAX CcWanVpnKeyManualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
AUGMENTS { ccWanVpnEntry }
::= { ccWanVpnKeyManualTable 1 }
CcWanVpnKeyManualEntry ::=
SEQUENCE {
ccWanVpnKeyManualAhAuth
INTEGER,
ccWanVpnKeyManualInAhAuthKey
HexPassword,
ccWanVpnKeyManualOutAhAuthKey
HexPassword,
ccWanVpnKeyManualInAhSpi
Unsigned32,
ccWanVpnKeyManualOutAhSpi
Unsigned32,
ccWanVpnKeyManualEspType
INTEGER,
ccWanVpnKeyManualEspEncrypAlg
INTEGER,
ccWanVpnKeyManualInEspEncrypKey
HexPassword,
ccWanVpnKeyManualOutEspEncrypKey
HexPassword,
ccWanVpnKeyManualEspAuthAlg
INTEGER,
ccWanVpnKeyManualInEspAuthKey
HexPassword,
ccWanVpnKeyManualOutEspAuthKey
HexPassword,
ccWanVpnKeyManualInEspSpi
Unsigned32,
ccWanVpnKeyManualOutEspSpi
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.1
ccWanVpnKeyManualAhAuth OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"data authentication and anti-replay services for the VPN tunnel.
The following 2 keys have max length:
md5 - 32 hex characters
sha1 - 40
"
DEFVAL { none }
::= { ccWanVpnKeyManualEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.2
ccWanVpnKeyManualInAhAuthKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AH Authentication Key for inbound traffic."
::= { ccWanVpnKeyManualEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.3
ccWanVpnKeyManualOutAhAuthKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AH Authentication Key for outbound traffic."
::= { ccWanVpnKeyManualEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.4
ccWanVpnKeyManualInAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"inbound security association created by the AH algorithm."
DEFVAL { 256 }
::= { ccWanVpnKeyManualEntry 4 }
-- ??-India: is this range correct?
-- note that it's SET via decimal, not hex.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.5
ccWanVpnKeyManualOutAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"outbound security association created by the AH algorithm."
DEFVAL { 256 }
::= { ccWanVpnKeyManualEntry 5 }
-- ??-India: is this range correct?
-- note that it's SET via decimal, not hex.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.6
ccWanVpnKeyManualEspType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
esp(2),
espWithAuthentication(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"packet encryption and optional data authentication
and anti-replay services for the VPN tunnel.
Some of the next 6 variables are used depending on:
none - all 6 variables are ignored
esp - first 3 are used, next 3 ignored
espWithAuth - all 6 are used
"
DEFVAL { esp }
::= { ccWanVpnKeyManualEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.7
ccWanVpnKeyManualEspEncrypAlg OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
des3(2),
aes128bit(3),
aes192bit(4),
aes256bit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Encryption Algorithm.
The following 2 keys have max length:
des - 16 hex characters
des3 - 48
aes128bit - 32
aes192bit - 48
aes256bit - 64
"
DEFVAL { des }
::= { ccWanVpnKeyManualEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.8
ccWanVpnKeyManualInEspEncrypKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Encryption Key for inbound traffic."
::= { ccWanVpnKeyManualEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.9
ccWanVpnKeyManualOutEspEncrypKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Encryption Key for inbound traffic."
::= { ccWanVpnKeyManualEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.10
ccWanVpnKeyManualEspAuthAlg OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha1(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Authentication Algorithm.
The following 2 keys have max length:
md5 - 32 hex characters
sha1 - 40"
DEFVAL { md5 }
::= { ccWanVpnKeyManualEntry 10 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.11
ccWanVpnKeyManualInEspAuthKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Authentication Key for inbound traffic."
::= { ccWanVpnKeyManualEntry 11 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.12
ccWanVpnKeyManualOutEspAuthKey OBJECT-TYPE
SYNTAX HexPassword (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Authentication Key for outbound traffic."
::= { ccWanVpnKeyManualEntry 12 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.13
ccWanVpnKeyManualInEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"inbound security association created by the ESP algorithm."
DEFVAL { 256 }
::= { ccWanVpnKeyManualEntry 13 }
-- ??-India: is this range correct?
-- note that it's SET via decimal, not hex.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.2.1.14
ccWanVpnKeyManualOutEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"outbound security association created by the ESP algorithm."
DEFVAL { 256 }
::= { ccWanVpnKeyManualEntry 14 }
-- ??-India: is this range correct?
-- note that it's SET via decimal, not hex.
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3
ccWanVpnKeyAutoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanVpnKeyAutoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Auto Key Setting entries."
::= { ccWanVpnTunnelConfig 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1
ccWanVpnKeyAutoEntry OBJECT-TYPE
SYNTAX CcWanVpnKeyAutoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
AUGMENTS { ccWanVpnEntry }
::= { ccWanVpnKeyAutoTable 1 }
CcWanVpnKeyAutoEntry ::=
SEQUENCE {
ccWanVpnKeyAutoUsePerfectSecrecy
TruthValue,
ccWanVpnKeyAutoAhAuth
INTEGER,
ccWanVpnKeyAutoEspType
INTEGER,
ccWanVpnKeyAutoEspEncrypAlg
INTEGER,
ccWanVpnKeyAutoEspAuthAlg
INTEGER,
ccWanVpnKeyAutoIkeOperationMode
INTEGER,
ccWanVpnKeyAutoIkeLocalIdType
INTEGER,
ccWanVpnKeyAutoIkeLocalIdData
DisplayString,
ccWanVpnKeyAutoIkeRemoteIdType
INTEGER,
ccWanVpnKeyAutoIkeRemoteIdData
DisplayString,
ccWanVpnKeyAutoIkeAuthType
INTEGER,
ccWanVpnKeyAutoIkeAuthAlg
INTEGER,
ccWanVpnKeyAutoIkeAuthPassphrase
Password,
ccWanVpnKeyAutoIkeEncrypAlg
INTEGER,
ccWanVpnKeyAutoIkeXauthMode
INTEGER,
ccWanVpnKeyAutoIkeXauthUsername
DisplayString,
ccWanVpnKeyAutoIkeXauthPassword
Password,
ccWanVpnKeyAutoIkeKeyLifetime
Unsigned32,
ccWanVpnKeyAutoIkeDiffieHelmanGroup
INTEGER
}
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.1
ccWanVpnKeyAutoUsePerfectSecrecy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable Perfect Forward Secrecy."
DEFVAL { false }
::= { ccWanVpnKeyAutoEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.2
ccWanVpnKeyAutoAhAuth OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
md5(2),
sha1(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"data authentication and anti-replay services for the VPN tunnel."
DEFVAL { none }
::= { ccWanVpnKeyAutoEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.3
ccWanVpnKeyAutoEspType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
esp(2),
espWithAuthentication(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"packet encryption and optional data authentication and
anti-replay services for the VPN tunnel.
Some of the next 2 variables are used depending on:
none - the 2 variables are ignored
esp - the first is used, the second is ignored
espWithAuth - both variables are used"
DEFVAL { esp }
::= { ccWanVpnKeyAutoEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.4
ccWanVpnKeyAutoEspEncrypAlg OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
des3(2),
aes128bit(3),
aes196bit(4),
aes256bit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Encryption Algorithm."
DEFVAL { des }
::= { ccWanVpnKeyAutoEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.5
ccWanVpnKeyAutoEspAuthAlg OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha1(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESP Authentication Algorithm.
"
DEFVAL { md5 }
::= { ccWanVpnKeyAutoEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.6
ccWanVpnKeyAutoIkeOperationMode OBJECT-TYPE
SYNTAX INTEGER
{
main(1),
aggressive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IKE opreational mode.
IKE main mode refers to the identity-protection exchange,
and IKE aggressive mode refers to the aggressive exchange"
DEFVAL { main }
::= { ccWanVpnKeyAutoEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.7
ccWanVpnKeyAutoIkeLocalIdType OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
fqdn(2),
ufqdn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"type of ID to be used for the WS 2000 end of the SA.
The next variable only applies if this is set to 'fqdn' or 'ufqdn'.
"
DEFVAL { ip }
::= { ccWanVpnKeyAutoEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.8
ccWanVpnKeyAutoIkeLocalIdData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Based upon the Local ID type you gave, specify the FQDN or UFQDN,"
DEFVAL { "?" }
::= { ccWanVpnKeyAutoEntry 8 }
-- This value ranges in size 0..256 octets. (This would have
-- been added as a range to the syntax, but when this is done,
-- it causes an error in MG-Soft Builder).
--
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.9
ccWanVpnKeyAutoIkeRemoteIdType OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
fqdn(2),
ufqdn(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"type of ID to be used for the remote end of the SA.
The next variable only applies if this is set to 'fqdn' or 'ufqdn'.
"
DEFVAL { ip }
::= { ccWanVpnKeyAutoEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.10
ccWanVpnKeyAutoIkeRemoteIdData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Based upon the Remote ID type you gave, specify the FQDN or UFQDN."
DEFVAL { "?" }
::= { ccWanVpnKeyAutoEntry 10 }
-- This value ranges in size 0..256 octets. (This would have
-- been added as a range to the syntax, but when this is done,
-- it causes an error in MG-Soft Builder).
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.11
ccWanVpnKeyAutoIkeAuthType OBJECT-TYPE
SYNTAX INTEGER
{
psk(1),
rsa(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IKE Authentication Type."
DEFVAL { psk }
::= { ccWanVpnKeyAutoEntry 11 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.12
ccWanVpnKeyAutoIkeAuthAlg OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
sha1(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IKE Authentication Algorithm."
DEFVAL { md5 }
::= { ccWanVpnKeyAutoEntry 12 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.13
ccWanVpnKeyAutoIkeAuthPassphrase OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"With Pre-Shared Key as the authentication mode, provide a key.
MD5 : 32-character hexadecimal key.
SHA1 : 40-character hexadecimal key.
"
DEFVAL { "?" }
::= { ccWanVpnKeyAutoEntry 13 }
-- ??-India: length?
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.14
ccWanVpnKeyAutoIkeEncrypAlg OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
des3(2),
aes128bit(3),
aes196bit(4),
aes256bit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IKE Encryption Algorithm."
DEFVAL { des }
::= { ccWanVpnKeyAutoEntry 14 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.15
ccWanVpnKeyAutoIkeXauthMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
generic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently XAUTH mechanism is not supported by WS2000 version 2.0.
If 'none', the next 2 variables are ignored.
"
DEFVAL { none }
::= { ccWanVpnKeyAutoEntry 15 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.16
ccWanVpnKeyAutoIkeXauthUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently XAUTH mechanism is not supported by WS2000 version 2.0."
DEFVAL { "?" }
::= { ccWanVpnKeyAutoEntry 16 }
-- ??-India: length?
--
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.17
ccWanVpnKeyAutoIkeXauthPassword OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Currently XAUTH mechanism is not supported by WS2000 version 2.0."
DEFVAL { "?" }
::= { ccWanVpnKeyAutoEntry 17 }
-- ??-India: length?
--
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.18
ccWanVpnKeyAutoIkeKeyLifetime OBJECT-TYPE
SYNTAX Unsigned32 (300..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that the key is valid."
::= { ccWanVpnKeyAutoEntry 18 }
-- ??-India: valid range of values? defval?
-- 1.3.6.1.4.1.388.11.2.5.1.6.4.3.1.19
ccWanVpnKeyAutoIkeDiffieHelmanGroup OBJECT-TYPE
SYNTAX INTEGER
{
group1length768bit(1),
group2length1024bit(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Diffie-Hellman key agreement protocol allows two users to exchange
a secret key over an insecure medium without any prior secrets."
DEFVAL { group1length768bit }
::= { ccWanVpnKeyAutoEntry 19 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5
ccWanVpnTunnelStatus OBJECT IDENTIFIER ::= { ccWanVpn 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1
ccWanVpnSaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanVpnSaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status of all tunnels that have been
configured on the switch."
::= { ccWanVpnTunnelStatus 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1
ccWanVpnSaEntry OBJECT-TYPE
SYNTAX CcWanVpnSaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWanVpnSaTunnelName }
::= { ccWanVpnSaTable 1 }
-- ??-India: should this AUGMENT the main VPN table?
CcWanVpnSaEntry ::=
SEQUENCE {
ccWanVpnSaTunnelName
DisplayString,
ccWanVpnSaStatus
INTEGER,
ccWanVpnSaInSpi
Unsigned32,
ccWanVpnSaOutSpi
Unsigned32,
ccWanVpnSaLifetime
Unsigned32,
ccWanVpnSaTxBytes
Unsigned32,
ccWanVpnSaRxBytes
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.1
ccWanVpnSaTunnelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..13))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tunnel Name."
::= { ccWanVpnSaEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.2
ccWanVpnSaStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
nonActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of each of the configured tunnels.
When the tunnel is not in use the status will read NOT_ACTIVE.
When the tunnel is connected the status will read ACTIVE."
::= { ccWanVpnSaEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.3
ccWanVpnSaInSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inbound SPI Security Parameter Index (SPI) for each of the tunnels.
This is used locally by the switch to identify a security association.
There are unique outbound and inbound SPIs."
::= { ccWanVpnSaEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.4
ccWanVpnSaOutSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Security Parameter Index (SPI) for each of the tunnels.
This is used locally by the switch to identify a security association.
There are unique outbound and inbound SPIs."
::= { ccWanVpnSaEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.5
ccWanVpnSaLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lifetime associated with a particular Security Association (SA). "
::= { ccWanVpnSaEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.6
ccWanVpnSaTxBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number amount of data (in bytes) transmitted
through each of the configured tunnels."
::= { ccWanVpnSaEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.1.1.7
ccWanVpnSaRxBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number amount of data (in bytes) received
through each of the configured tunnels."
::= { ccWanVpnSaEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.2
ccWanVpnIkeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanVpnIkeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of tunnels configured to use IKE for automatic key exchange"
::= { ccWanVpnTunnelStatus 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1
ccWanVpnIkeEntry OBJECT-TYPE
SYNTAX CcWanVpnIkeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWanVpnIkeTunnelName }
::= { ccWanVpnIkeTable 1 }
-- ??-India: should this AUGMENT the main VPN table?
CcWanVpnIkeEntry ::=
SEQUENCE {
ccWanVpnIkeTunnelName
DisplayString,
ccWanVpnIkeState
DisplayString,
ccWanVpnIkeRemainingLife
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.1
ccWanVpnIkeTunnelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tunnel name."
::= { ccWanVpnIkeEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.2
ccWanVpnIkeState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State for each of the tunnels configured
to use IKE for automatic key exchange.
When the tunnel is not active this will display NOT_CONNECTED.
When the tunnel is active this will display CONNECTED.
"
::= { ccWanVpnIkeEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.6.5.2.1.3
ccWanVpnIkeRemainingLife OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining life for the current IKE key
for each of the listed tunnels."
::= { ccWanVpnIkeEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.7
ccWanContentBlock OBJECT IDENTIFIER ::= { ccWan 7 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.1
ccWanContentBlockSmtp OBJECT-TYPE
SYNTAX BITS
{
blockSmtpHelo(0),
blockSmtpMail(1),
blockSmtpRcpt(2),
blockSmtpData(3),
blockSmtpQuit(4),
blockSmtpSend(5),
blockSmtpSaml(6),
blockSmtpReset(7),
blockSmtpVrfy(8),
blockSmtpExpn(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP content block."
::= { ccWanContentBlock 1 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.2
ccWanContentBlockFtp OBJECT-TYPE
SYNTAX BITS
{
blockFtpStoringFiles(0),
blockFtpRetrievingFiles(1),
blockFtpDirectoryList(2),
blockFtpCreateDirectory(3),
blockFtpChangeDirectory(4),
blockFtpPassiveOperation(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"FTP content block."
::= { ccWanContentBlock 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.3
ccWanContentBlockHttp OBJECT-TYPE
SYNTAX BITS
{
blockHttpWebProxy(0),
blockHttpActiveX(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HTTP content block."
::= { ccWanContentBlock 3 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.4
ccWanContentBlockOutUrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcWanContentBlockOutUrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Content Block URL entries."
::= { ccWanContentBlock 4 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.4.1
ccWanContentBlockOutUrlEntry OBJECT-TYPE
SYNTAX CcWanContentBlockOutUrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccWanContentBlockOutUrlIndex }
::= { ccWanContentBlockOutUrlTable 1 }
CcWanContentBlockOutUrlEntry ::=
SEQUENCE {
ccWanContentBlockOutUrlIndex
Unsigned32,
ccWanContentBlockOutUrlExtension
DisplayString,
ccWanContentBlockOutUrlRowStatus
StaticRowEnable
}
-- 1.3.6.1.4.1.388.11.2.5.1.7.4.1.1
ccWanContentBlockOutUrlIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Simple Index."
::= { ccWanContentBlockOutUrlEntry 1 }
-- ??-India: range OK?
-- 1.3.6.1.4.1.388.11.2.5.1.7.4.1.2
ccWanContentBlockOutUrlExtension OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"URL extension."
::= { ccWanContentBlockOutUrlEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.1.7.4.1.3
ccWanContentBlockOutUrlRowStatus OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status."
::= { ccWanContentBlockOutUrlEntry 3 }
-- This group describes the physical ports on the unit.
-- 1.3.6.1.4.1.388.11.2.5.2
ccPort OBJECT IDENTIFIER ::= { ccSwitch 2 }
-- This table contains one entry for each physical port
-- on the switch.
-- 1.3.6.1.4.1.388.11.2.5.2.1
ccPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each physical port
on the switch."
::= { ccPort 1 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1
ccPortEntry OBJECT-TYPE
SYNTAX CcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccPortIndex }
::= { ccPortTable 1 }
CcPortEntry ::=
SEQUENCE {
ccPortIndex
Integer32,
ccPortType
INTEGER,
ccPortPoeEquipped
TruthValue,
ccPortStatus
INTEGER,
ccPortDuplex
INTEGER,
ccPortSpeed
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.1
ccPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index.
Instance/index .1 represents the port labelled '1' on the
physical unit.
The WAN port will reside after all ports that are numbered
on the physcial unit."
::= { ccPortEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.2
ccPortType OBJECT-TYPE
SYNTAX INTEGER
{
wanPort(1),
lanPort(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of the port."
::= { ccPortEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.3
ccPortPoeEquipped OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port can provide power-over-ethernet."
::= { ccPortEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.4
ccPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
linkUp(1),
linkDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tells if the port is up/down."
::= { ccPortEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.5
ccPortDuplex OBJECT-TYPE
SYNTAX INTEGER
{
halfDuplex(1),
fullDuplex(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the duplex, (half/full), status of the port."
::= { ccPortEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.2.1.1.6
ccPortSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link's speed in bits per second."
::= { ccPortEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4
ccLan OBJECT IDENTIFIER ::= { ccSwitch 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2
ccSubnet OBJECT IDENTIFIER ::= { ccLan 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1
ccSubnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Subnets."
::= { ccSubnet 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1
ccSubnetEntry OBJECT-TYPE
SYNTAX CcSubnetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccSubnetIndex }
::= { ccSubnetTable 1 }
CcSubnetEntry ::=
SEQUENCE {
ccSubnetIndex
Integer32,
ccSubnetEnable
StaticRowEnable,
ccSubnetName
DisplayString,
ccSubnetIpAddress
IpAddress,
ccSubnetIpSubnetMask
IpAddress,
ccSubnetPortMembers
BITS,
ccSubnetWlanMembers
BITS,
ccSubnetDhcpState
INTEGER,
ccSubnetDhcpIpAddress
IpAddress,
ccSubnetDhcpSubnetMask
IpAddress
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.1
ccSubnetIndex OBJECT-TYPE
SYNTAX Integer32 (1..127)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index, 1..4"
::= { ccSubnetEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.2
ccSubnetEnable OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this Subnet."
::= { ccSubnetEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.3
ccSubnetName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnet name."
::= { ccSubnetEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.4
ccSubnetIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip address of this Subnet."
::= { ccSubnetEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.5
ccSubnetIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPaddr subnet mask of this Subnet"
::= { ccSubnetEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.6
ccSubnetPortMembers OBJECT-TYPE
SYNTAX BITS
{
null(0),
port1(1),
port2(2),
port3(3),
port4(4),
port5(5),
port6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pointer to zero or more ports that are members of
this Subnet.
No port can be a member of more than one Subnet at
any given time."
::= { ccSubnetEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.7
ccSubnetWlanMembers OBJECT-TYPE
SYNTAX BITS
{
null(0),
wlan1(1),
wlan2(2),
wlan3(3),
wlan4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pointer to zero or more WLANs that are members of
this Subnet.
No Subnet can be a member of more than one Subnet at
any given time."
::= { ccSubnetEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.8
ccSubnetDhcpState OBJECT-TYPE
SYNTAX INTEGER
{
dhcpClient(1),
dhcpServer(2),
dhcpNone(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how Subnet gets its IP address/mask."
::= { ccSubnetEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.9
ccSubnetDhcpIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address obtained via DHCP if this Subnet is
configured as a DHCP client.
If this Subnet is configured to not use DHCP, or is a
DHCP server this value will be 0.0.0.0. Likewise, if
this Subnet is configured to be a DHCP client but has
not yet obtained a value via DHCP, this value will be
0.0.0.0."
::= { ccSubnetEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.1.1.10
ccSubnetDhcpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Subnet IPaddr subnet mask obtained via DHCP if
this Subnet is configured as a DHCP client.
If this Subnet is configured to not use DHCP, or is a
DHCP server this value will be 0.0.0.0. Likewise, if
this Subnet is configured to be a DHCP client but has
not yet obtained a value via DHCP, this value will be
0.0.0.0."
::= { ccSubnetEntry 10 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2
ccSubnetDhcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures a DHCP server for a Subnet. While these
values can always be SET, they will only take effect
if the given Subnet is enabled and configured to be
a DHCP server."
::= { ccSubnet 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1
ccSubnetDhcpServerEntry OBJECT-TYPE
SYNTAX CcSubnetDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccSubnetIndex }
::= { ccSubnetDhcpServerTable 1 }
CcSubnetDhcpServerEntry ::=
SEQUENCE {
ccSubnetDhcpServerEnable
StaticRowEnable,
ccSubnetDhcpServerPoolStart
IpAddress,
ccSubnetDhcpServerPoolEnd
IpAddress,
ccSubnetDhcpServerPrimaryDns
IpAddress,
ccSubnetDhcpServerSecondaryDns
IpAddress,
ccSubnetDhcpServerDefaultGateway
IpAddress,
ccSubnetDhcpServerLeaseTime
Integer32,
ccSubnetDhcpServerWinsServer
IpAddress,
ccSubnetDhcpServerDomainName
DisplayString
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.1
ccSubnetDhcpServerEnable OBJECT-TYPE
SYNTAX StaticRowEnable
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable DHCP Server functionality on this Subnet."
::= { ccSubnetDhcpServerEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.2
ccSubnetDhcpServerPoolStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start/low end of the range of IP addresses to
give-out."
::= { ccSubnetDhcpServerEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.3
ccSubnetDhcpServerPoolEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end/high-end of the range of IP addresses to
give-out."
::= { ccSubnetDhcpServerEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.4
ccSubnetDhcpServerPrimaryDns OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of primary DNS server to assign to DHCP
clients."
::= { ccSubnetDhcpServerEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.5
ccSubnetDhcpServerSecondaryDns OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of secondary DNS server to assign to DHCP
clients."
::= { ccSubnetDhcpServerEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.6
ccSubnetDhcpServerDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of default gateway to assign to DHCP
clients."
::= { ccSubnetDhcpServerEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.7
ccSubnetDhcpServerLeaseTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP lease time."
::= { ccSubnetDhcpServerEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.8
ccSubnetDhcpServerWinsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server WINS server IP Address."
::= { ccSubnetDhcpServerEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.2.1.9
ccSubnetDhcpServerDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP server Domain Name."
::= { ccSubnetDhcpServerEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.3
ccSubnetDhcpServerStaticMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetDhcpServerStaticMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of static MAC-IPaddr mappings for the given
DHCP server."
::= { ccSubnet 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.3.1
ccSubnetDhcpServerStaticMapEntry OBJECT-TYPE
SYNTAX CcSubnetDhcpServerStaticMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccSubnetIndex, ccSubnetDhcpServerStaticMapMac }
::= { ccSubnetDhcpServerStaticMapTable 1 }
CcSubnetDhcpServerStaticMapEntry ::=
SEQUENCE {
ccSubnetDhcpServerStaticMapMac
PhysAddress,
ccSubnetDhcpServerStaticMapIpAddr
IpAddress,
ccSubnetDhcpServerStaticMapEnable
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.3.1.1
ccSubnetDhcpServerStaticMapMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MAC address to be mapped."
::= { ccSubnetDhcpServerStaticMapEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.3.1.2
ccSubnetDhcpServerStaticMapIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address to assign to this MAC address."
::= { ccSubnetDhcpServerStaticMapEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.3.1.3
ccSubnetDhcpServerStaticMapEnable OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value to control row creation/deletion."
::= { ccSubnetDhcpServerStaticMapEntry 3 }
-- MIBs to control which entities in the switch can send
-- packets to other entities, and records the amount of
-- traffic conveyed among those entities.
--
-- There is no sense to attempt to count packets/octets
-- sent from a source to a dest - linux does not allow this.
--
-- ??- These tables all need to be re-worked for the sole
-- purpose of controlling "subnet access". Most items need
-- to be renamed.
-- 1.3.6.1.4.1.388.11.2.5.4.2.4
ccSubnetAccess OBJECT IDENTIFIER ::= { ccSubnet 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1
ccSubnetAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes how packets are allowed to flow from different
sources to different destinations.
Note that since only subnets can be sources for this table,
the ccSubnetTable:ccSubnetIndex is used as the 1st index to
this table.
Note that this table never contains entries where src==dest,
for example, there is no entry with:
_SrcPointerToSource points to subnet1
_DestPointerToSource points to subnet1
Note also that if a given subnet does not exisit, (because
it has not been enabled in ccSubnetTable), no entries in this
table will exist with that subnet as either src or dest.
"
::= { ccSubnetAccess 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1
ccSubnetAccessEntry OBJECT-TYPE
SYNTAX CcSubnetAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccSubnetIndex, ccSubnetAccessDestIndex }
::= { ccSubnetAccessTable 1 }
CcSubnetAccessEntry ::=
SEQUENCE {
ccSubnetAccessDestIndex
Unsigned32,
ccSubnetAccessDestType
INTEGER,
ccSubnetAccessDestPtrToDest
SinglePointer,
ccSubnetAccessRuleType
INTEGER,
ccSubnetAccessPtrToRules
MultiPointer255
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.1
ccSubnetAccessDestIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index for destination."
::= { ccSubnetAccessEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.2
ccSubnetAccessDestType OBJECT-TYPE
SYNTAX INTEGER
{
destSubnet(1),
destWan(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the destination.
destDrop is a 'virtual' destination that accounts for
all dropped packets."
::= { ccSubnetAccessEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.3
ccSubnetAccessDestPtrToDest OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to the corresponding entry in the ccSubnet or
ccWan table, (depending on _DestType).
"
::= { ccSubnetAccessEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.4
ccSubnetAccessRuleType OBJECT-TYPE
SYNTAX INTEGER
{
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All ccSubnetAccessRuleTable entries for this
combination of ccSubnetIndex and
ccSubnetAccessDestIndex will be of the same type,
(accept or deny).
"
::= { ccSubnetAccessEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.1.1.5
ccSubnetAccessPtrToRules OBJECT-TYPE
SYNTAX MultiPointer255
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Points to the zero or more ccSubnetAccessRuleTable
entries that correspond to this ccSubnetIndex +
ccSubnetAccessDestIndex combination/entry.
This value cannot be changed here, but is a
reflection of the ccSubnetAccessRuleTable entries
that currently point to this entry via their
ccSubnetAccessRuleSrcPtr and _DestPtr values.
"
::= { ccSubnetAccessEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2
ccSubnetAccessRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetAccessRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes how packets are allowed to flow from different
sources to different destinations.
Note that since only subnets can be sources for this table,
the ccSubnetTable:ccSubnetIndex is used as the 1st index to
this table.
Note that this table never contains entries where src==dest,
for example, there is no entry with:
_SrcPointerToSource points to subnet1
_DestPointerToSource points to subnet1
Note also that if a given subnet does not exisit, (because
it has not been enabled in ccSubnetTable), no entries in this
table will exist with that subnet as either src or dest.
"
::= { ccSubnetAccess 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1
ccSubnetAccessRuleEntry OBJECT-TYPE
SYNTAX CcSubnetAccessRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccSubnetAccessRuleIndex }
::= { ccSubnetAccessRuleTable 1 }
CcSubnetAccessRuleEntry ::=
SEQUENCE {
ccSubnetAccessRuleIndex
Unsigned32,
ccSubnetAccessRuleSrcPtr
SinglePointer,
ccSubnetAccessRuleDestPtr
SinglePointer,
ccSubnetAccessRuleName
DisplayString,
ccSubnetAccessRuleTransport
INTEGER,
ccSubnetAccessRuleStartPort
Integer32,
ccSubnetAccessRuleEndPort
Integer32,
ccSubnetAccessRuleRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.1
ccSubnetAccessRuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Each src/dest combination can have several rules;
this value is the index."
::= { ccSubnetAccessRuleEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.2
ccSubnetAccessRuleSrcPtr OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the value of ccSubnetIndex corresponding
to the source for this rule."
::= { ccSubnetAccessRuleEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.3
ccSubnetAccessRuleDestPtr OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the value of ccSubnetAccessDestIndex
corresponding to the destination for this rule."
::= { ccSubnetAccessRuleEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.4
ccSubnetAccessRuleName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of ACL entry."
::= { ccSubnetAccessRuleEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.5
ccSubnetAccessRuleTransport OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
tcp(2),
udp(3),
icmp(4),
ah(5),
esp(6),
gre(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transport."
::= { ccSubnetAccessRuleEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.6
ccSubnetAccessRuleStartPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting port number."
::= { ccSubnetAccessRuleEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.7
ccSubnetAccessRuleEndPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ending port number."
::= { ccSubnetAccessRuleEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.2.1.8
ccSubnetAccessRuleRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status."
::= { ccSubnetAccessRuleEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3
ccSubnetAccessAdvInTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetAccessAdvInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Advanced Inbound entries."
::= { ccSubnetAccess 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1
ccSubnetAccessAdvInEntry OBJECT-TYPE
SYNTAX CcSubnetAccessAdvInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSubnetAccessAdvInIndex }
::= { ccSubnetAccessAdvInTable 1 }
CcSubnetAccessAdvInEntry ::=
SEQUENCE {
ccSubnetAccessAdvInIndex
Unsigned32,
ccSubnetAccessAdvInSrcIp
IpAddress,
ccSubnetAccessAdvInSrcIpLength
Integer32,
ccSubnetAccessAdvInDestIp
IpAddress,
ccSubnetAccessAdvInDestIpLength
Integer32,
ccSubnetAccessAdvInTransport
INTEGER,
ccSubnetAccessAdvInSrcPortStart
Integer32,
ccSubnetAccessAdvInSrcPortEnd
Integer32,
ccSubnetAccessAdvInDestPortStart
Integer32,
ccSubnetAccessAdvInDestPortEnd
Integer32,
ccSubnetAccessAdvInReverseNatIp
IpAddress,
ccSubnetAccessAdvInReverseNatPort
Integer32,
ccSubnetAccessAdvInAction
INTEGER,
ccSubnetAccessAdvInRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.1
ccSubnetAccessAdvInIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Description."
::= { ccSubnetAccessAdvInEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.2
ccSubnetAccessAdvInSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address"
::= { ccSubnetAccessAdvInEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.3
ccSubnetAccessAdvInSrcIpLength OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask length for the IP address"
::= { ccSubnetAccessAdvInEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.4
ccSubnetAccessAdvInDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address
"
::= { ccSubnetAccessAdvInEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.5
ccSubnetAccessAdvInDestIpLength OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"mask length for the IP address"
::= { ccSubnetAccessAdvInEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.6
ccSubnetAccessAdvInTransport OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
tcp(2),
udp(3),
icmp(4),
ah(5),
esp(6),
gre(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of transport"
::= { ccSubnetAccessAdvInEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.7
ccSubnetAccessAdvInSrcPortStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"start of source port list
"
::= { ccSubnetAccessAdvInEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.8
ccSubnetAccessAdvInSrcPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End of source port list
"
::= { ccSubnetAccessAdvInEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.9
ccSubnetAccessAdvInDestPortStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"start of destination port list
"
::= { ccSubnetAccessAdvInEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.10
ccSubnetAccessAdvInDestPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End of destination port list
"
::= { ccSubnetAccessAdvInEntry 10 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.12
ccSubnetAccessAdvInReverseNatIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address to use for reverse NAT. To disable, use 0.0.0.0."
::= { ccSubnetAccessAdvInEntry 12 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.13
ccSubnetAccessAdvInReverseNatPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port to use for reverse NAT."
::= { ccSubnetAccessAdvInEntry 13 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.14
ccSubnetAccessAdvInAction OBJECT-TYPE
SYNTAX INTEGER
{
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action on the acl i.e allow or deny
"
::= { ccSubnetAccessAdvInEntry 14 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.3.1.15
ccSubnetAccessAdvInRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"status of the row
"
::= { ccSubnetAccessAdvInEntry 15 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4
ccSubnetAccessAdvOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcSubnetAccessAdvOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Advanced Outbound entries."
::= { ccSubnetAccess 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1
ccSubnetAccessAdvOutEntry OBJECT-TYPE
SYNTAX CcSubnetAccessAdvOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSubnetAccessAdvOutIndex }
::= { ccSubnetAccessAdvOutTable 1 }
CcSubnetAccessAdvOutEntry ::=
SEQUENCE {
ccSubnetAccessAdvOutIndex
Unsigned32,
ccSubnetAccessAdvOutSrcIp
IpAddress,
ccSubnetAccessAdvOutSrcIpLength
Integer32,
ccSubnetAccessAdvOutDestIp
IpAddress,
ccSubnetAccessAdvOutDestIpLength
Integer32,
ccSubnetAccessAdvOutTransport
INTEGER,
ccSubnetAccessAdvOutSrcPortStart
Integer32,
ccSubnetAccessAdvOutSrcPortEnd
Integer32,
ccSubnetAccessAdvOutDestPortStart
Integer32,
ccSubnetAccessAdvOutDestPortEnd
Integer32,
ccSubnetAccessAdvOutReverseNat
SinglePointer,
ccSubnetAccessAdvOutAction
INTEGER,
ccSubnetAccessAdvOutRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.1
ccSubnetAccessAdvOutIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Description."
::= { ccSubnetAccessAdvOutEntry 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.2
ccSubnetAccessAdvOutSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address"
::= { ccSubnetAccessAdvOutEntry 2 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.3
ccSubnetAccessAdvOutSrcIpLength OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask length for the IP address"
::= { ccSubnetAccessAdvOutEntry 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.4
ccSubnetAccessAdvOutDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address"
::= { ccSubnetAccessAdvOutEntry 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.5
ccSubnetAccessAdvOutDestIpLength OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"mask length for the IP address"
::= { ccSubnetAccessAdvOutEntry 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.6
ccSubnetAccessAdvOutTransport OBJECT-TYPE
SYNTAX INTEGER
{
all(1),
tcp(2),
udp(3),
icmp(4),
ah(5),
esp(6),
gre(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of transport"
::= { ccSubnetAccessAdvOutEntry 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.7
ccSubnetAccessAdvOutSrcPortStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"start of source port list"
::= { ccSubnetAccessAdvOutEntry 7 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.8
ccSubnetAccessAdvOutSrcPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End of source port list"
::= { ccSubnetAccessAdvOutEntry 8 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.9
ccSubnetAccessAdvOutDestPortStart OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"start of destination port list"
::= { ccSubnetAccessAdvOutEntry 9 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.10
ccSubnetAccessAdvOutDestPortEnd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End of destination port list
"
::= { ccSubnetAccessAdvOutEntry 10 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.11
ccSubnetAccessAdvOutReverseNat OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Points to a ccWanIpAddrTable entry representing the WAN IP
addr to be used for NAT. To disable NAT, set this value to
0."
::= { ccSubnetAccessAdvOutEntry 11 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.12
ccSubnetAccessAdvOutAction OBJECT-TYPE
SYNTAX INTEGER
{
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action on the acl i.e allow or deny"
::= { ccSubnetAccessAdvOutEntry 12 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.4.1.13
ccSubnetAccessAdvOutRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"status of the row"
::= { ccSubnetAccessAdvOutEntry 13 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.5
ccSubnetAccessAdvOverrideMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override the Subnet Access and NAT settings."
::= { ccSubnetAccess 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.2.4.6
ccSubnetAccessAdvImportRules OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 1 the Subnet Access Rules shall
be imported on top of the Advanced Access rules."
::= { ccSubnetAccess 6 }
-- 1.3.6.1.4.1.388.11.2.5.4.3
ccLanVlan OBJECT IDENTIFIER ::= { ccLan 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.3.1
ccLanVlanType OBJECT-TYPE
SYNTAX INTEGER
{
portBased(1),
userBased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of the VLAN port/user based
"
::= { ccLanVlan 1 }
-- 1.3.6.1.4.1.388.11.2.5.4.3.2
ccLanVlanTrunkPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port used for VLAN trunking ( 1-6)
"
::= { ccLanVlan 2 }
-- ??-India: can be either the port #,
-- or the index in the PortTable - implementer's choice.
-- 1.3.6.1.4.1.388.11.2.5.4.3.3
ccLanVlanDefaultTag OBJECT-TYPE
SYNTAX Unsigned32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Deafult VLAN tag ( default is 1)
"
::= { ccLanVlan 3 }
-- 1.3.6.1.4.1.388.11.2.5.4.3.4
ccLanVlanTrunked OBJECT-TYPE
SYNTAX BITS
{
noVlansAreTrunked(0),
trunkVlan01(1),
trunkVlan02(2),
trunkVlan03(3),
trunkVlan04(4),
trunkVlan05(5),
trunkVlan06(6),
trunkVlan07(7),
trunkVlan08(8),
trunkVlan09(9),
trunkVlan10(10),
trunkVlan11(11),
trunkVlan12(12),
trunkVlan13(13),
trunkVlan14(14),
trunkVlan15(15),
trunkVlan16(16),
trunkVlan17(17),
trunkVlan18(18),
trunkVlan19(19),
trunkVlan20(20),
trunkVlan21(21),
trunkVlan22(22),
trunkVlan23(23),
trunkVlan24(24),
trunkVlan25(25),
trunkVlan26(26),
trunkVlan27(27),
trunkVlan28(28),
trunkVlan29(29),
trunkVlan30(30),
trunkVlan31(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of VLANs which are trunked.
"
::= { ccLanVlan 4 }
-- 1.3.6.1.4.1.388.11.2.5.4.3.5
ccLanVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcLanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VLAN IDs mapped to Subnets."
::= { ccLanVlan 5 }
-- 1.3.6.1.4.1.388.11.2.5.4.3.5.1
ccLanVlanEntry OBJECT-TYPE
SYNTAX CcLanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccSubnetIndex }
::= { ccLanVlanTable 1 }
CcLanVlanEntry ::=
SEQUENCE {
ccLanVlanId
Unsigned32
}
-- 1.3.6.1.4.1.388.11.2.5.4.3.5.1.1
ccLanVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan associated with a subnet
"
::= { ccLanVlanEntry 1 }
-- Router config.
--
-- Note that static routes can be seen and added in the
-- MIB-II ip group tables.
-- 1.3.6.1.4.1.388.11.2.6
ccRouter OBJECT IDENTIFIER ::= { ws2k 6 }
-- RIP config.
-- 1.3.6.1.4.1.388.11.2.6.1
ccRouterRip OBJECT IDENTIFIER ::= { ccRouter 1 }
-- 1.3.6.1.4.1.388.11.2.6.1.1
ccRouterRipType OBJECT-TYPE
SYNTAX INTEGER
{
noRip(1),
ripV1(2),
ripV2withV1compatibility(3),
ripV2(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP type."
::= { ccRouterRip 1 }
-- Version of the RIP enabled on the interface
--
-- 1.3.6.1.4.1.388.11.2.6.1.2
ccRouterRipDirection OBJECT-TYPE
SYNTAX INTEGER
{
both(1),
rxOnly(2),
txOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP direction."
::= { ccRouterRip 2 }
-- Direction of RIP messages
--
-- RIP v2 config.
-- 1.3.6.1.4.1.388.11.2.6.1.3
ccRouterRip2 OBJECT IDENTIFIER ::= { ccRouterRip 3 }
-- 1.3.6.1.4.1.388.11.2.6.1.3.1
ccRouterRip2AuthType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
simple(2),
md5(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP v2 authentication type."
::= { ccRouterRip2 1 }
-- Type of authentication used by RIP
--
-- 1.3.6.1.4.1.388.11.2.6.1.3.2
ccRouterRip2SimplePassword OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password used for RIP v2 simple authentication."
::= { ccRouterRip2 2 }
-- 1.3.6.1.4.1.388.11.2.6.1.3.3
ccRouterRip2Md5Key1Id OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP v2 with MD5 authentication: key #1 - ID."
::= { ccRouterRip2 3 }
-- 1.3.6.1.4.1.388.11.2.6.1.3.4
ccRouterRip2Md5Key1AuthKey OBJECT-TYPE
SYNTAX Password (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP v2 with MD5 authentication: key #1 - auth key."
::= { ccRouterRip2 4 }
-- 1.3.6.1.4.1.388.11.2.6.1.3.5
ccRouterRip2Md5Key2Id OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP v2 with MD5 authentication: key #2 - ID."
::= { ccRouterRip2 5 }
-- 1.3.6.1.4.1.388.11.2.6.1.3.6
ccRouterRip2Md5Key2AuthKey OBJECT-TYPE
SYNTAX Password (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP v2 with MD5 authentication: key #2 - auth key."
::= { ccRouterRip2 6 }
-- 1.3.6.1.4.1.388.11.2.6.2
ccRouterRoutesTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRouterRoutesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ccRouter 2 }
-- 1.3.6.1.4.1.388.11.2.6.2.1
ccRouterRoutesEntry OBJECT-TYPE
SYNTAX CcRouterRoutesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Routing entries."
INDEX { ccRouterRoutesIndex }
::= { ccRouterRoutesTable 1 }
CcRouterRoutesEntry ::=
SEQUENCE {
ccRouterRoutesIndex
Unsigned32,
ccRouterRoutesDest
IpAddress,
ccRouterRoutesDestMask
IpAddress,
ccRouterRoutesGateway
IpAddress,
ccRouterRoutesInterface
SinglePointer,
ccRouterRoutesMetric
Integer32
}
-- 1.3.6.1.4.1.388.11.2.6.2.1.1
ccRouterRoutesIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRouterRoutesEntry 1 }
-- ??-India: range OK?
-- 1.3.6.1.4.1.388.11.2.6.2.1.2
ccRouterRoutesDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the destination
"
::= { ccRouterRoutesEntry 2 }
-- 1.3.6.1.4.1.388.11.2.6.2.1.3
ccRouterRoutesDestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mask used to specify the route
"
::= { ccRouterRoutesEntry 3 }
-- 1.3.6.1.4.1.388.11.2.6.2.1.4
ccRouterRoutesGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip address of the gateway for this route
"
::= { ccRouterRoutesEntry 4 }
-- 1.3.6.1.4.1.388.11.2.6.2.1.5
ccRouterRoutesInterface OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface used for this route
"
::= { ccRouterRoutesEntry 5 }
-- ??-CSM: why does label say interfaces?
-- does this need to be a multipointer?
--
-- 1.3.6.1.4.1.388.11.2.6.2.1.6
ccRouterRoutesMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric specified for this route."
::= { ccRouterRoutesEntry 6 }
-- 1.3.6.1.4.1.388.11.2.6.3
ccRouterUserRoutesTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRouterUserRoutesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of User defined Routes."
::= { ccRouter 3 }
-- 1.3.6.1.4.1.388.11.2.6.3.1
ccRouterUserRoutesEntry OBJECT-TYPE
SYNTAX CcRouterUserRoutesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User defined routes
"
INDEX { ccRouterUserRoutesIndex }
::= { ccRouterUserRoutesTable 1 }
CcRouterUserRoutesEntry ::=
SEQUENCE {
ccRouterUserRoutesIndex
INTEGER,
ccRouterUserRoutesDest
IpAddress,
ccRouterUserRoutesDestMask
IpAddress,
ccRouterUserRoutesGateway
IpAddress,
ccRouterUserRoutesInterface
INTEGER,
ccRouterUserRoutesMetric
Integer32,
ccRouterUserRoutesRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.6.3.1.1
ccRouterUserRoutesIndex OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRouterUserRoutesEntry 1 }
-- ??-India: range OK?
-- 1.3.6.1.4.1.388.11.2.6.3.1.2
ccRouterUserRoutesDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the destination"
::= { ccRouterUserRoutesEntry 2 }
-- 1.3.6.1.4.1.388.11.2.6.3.1.3
ccRouterUserRoutesDestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask used to specify the route"
::= { ccRouterUserRoutesEntry 3 }
-- 1.3.6.1.4.1.388.11.2.6.3.1.4
ccRouterUserRoutesGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip address of the gateway for this route"
::= { ccRouterUserRoutesEntry 4 }
-- 1.3.6.1.4.1.388.11.2.6.3.1.5
ccRouterUserRoutesInterface OBJECT-TYPE
SYNTAX INTEGER
{
wan(1),
subnet1(2),
subnet2(3),
subnet3(4),
subnet4(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface used for this route"
::= { ccRouterUserRoutesEntry 5 }
-- ??-CSM: why does label say interfaces?
-- does this need to be a multipointer?
--
-- 1.3.6.1.4.1.388.11.2.6.3.1.6
ccRouterUserRoutesMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Metric specified for this route."
::= { ccRouterUserRoutesEntry 6 }
-- 1.3.6.1.4.1.388.11.2.6.3.1.7
ccRouterUserRoutesRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of this row.
"
::= { ccRouterUserRoutesEntry 7 }
-- All MIBs in this group are related to detection and
-- location of 'Rogue' APs.
-- 1.3.6.1.4.1.388.11.2.7
ccRap OBJECT IDENTIFIER ::= { ws2k 7 }
-- This group specifies which Rogue detection algorithm(s)
-- will be employed, and provides necessary controls for
-- each 'sub-algorithm'.
-- 1.3.6.1.4.1.388.11.2.7.1
ccRapControl OBJECT IDENTIFIER ::= { ccRap 1 }
-- This group contains MIB variables for controlling
-- and reporting the APs heard by Symbol MUs that
-- support the 'rogue AP detection assist' algorithm.
--
-- This is supported in Mobile Companion v?.? and later.
--
-- The following is a PARTIAL list of Symbol MUs that
-- support this feature:
-- ???
--
-- Note that Symbol MUs running Mobile Companion v?.?
-- only report the first 20 APs heard. The order in
-- which APs appear in the MU's list is random. This
-- means that if the total of all APs in the local
-- environment (including rogues) is more than 20, it
-- may take more than one poll cycle to find an MU that
-- has that rogue within the top 20 entries of it's
-- list of heard APs.
--
-- Symbol MUs running Mobile Companion v?.? and later
-- do not have this limitation, and report all heard
-- APs on every poll cycle. A new/rogue AP heard in
-- with such an MU will be reported regardless of the
-- total number of APs in the local environment.
-- 1.3.6.1.4.1.388.11.2.7.1.3
ccRapControlPollSymbolMus OBJECT IDENTIFIER ::= { ccRapControl 3 }
-- 1.3.6.1.4.1.388.11.2.7.1.3.1
ccRapPollSymbolMusEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable polling MUs for their lists of known
APs.
The state of this variable persists across reboots.
The factory-default state is disabled."
::= { ccRapControlPollSymbolMus 1 }
-- 1.3.6.1.4.1.388.11.2.7.1.3.2
ccRapPollSymbolMusInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 10 (minutes)."
::= { ccRapControlPollSymbolMus 2 }
-- Rogues can be learned via 'production' Portals if they
-- happen to be on the same channel. Such Portals listen for
-- beacons (at a given interval), and report APs heard.
--
-- This group controls the learning of new APs via this
-- method.
-- 1.3.6.1.4.1.388.11.2.7.1.4
ccRapControlOnChannel OBJECT IDENTIFIER ::= { ccRapControl 4 }
-- 1.3.6.1.4.1.388.11.2.7.1.4.1
ccRapOnChannelEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable polling MUs for their lists of known
APs.
The state of this variable persists across reboots.
The factory-default state is disabled."
::= { ccRapControlOnChannel 1 }
-- 1.3.6.1.4.1.388.11.2.7.1.4.2
ccRapOnChannelInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 10 (minutes)."
::= { ccRapControlOnChannel 2 }
-- One or more Portals can be dedicated for the purpose of
-- detecting Rogues, called 'detectors'. Such Portals do NOT
-- pass 'production' packets since they are busy scanning many
-- different channels.
--
-- This group controls the learning of new APs via this
-- method.
-- 1.3.6.1.4.1.388.11.2.7.1.5
ccRapControlDetectors OBJECT IDENTIFIER ::= { ccRapControl 5 }
-- 1.3.6.1.4.1.388.11.2.7.1.5.1
ccRapDetectorsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the entire 'detector' sub-system.
On the true-to-false transition, any portals
previously claimed as listeners will be released
and reset. Once reset, they will appear to the
switch as if just newly installed, (and thus
may or may not be adopted depending on settings
in the switch).
The state of this variable persists across reboots.
The factory-default state is disabled."
::= { ccRapControlDetectors 1 }
-- 1.3.6.1.4.1.388.11.2.7.1.5.2
ccRapDetectorsInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 10 (minutes)."
::= { ccRapControlDetectors 2 }
-- This group controls how newly detected APs are
-- 'authorized', meaning they will be reported as
-- 'approved' rather than 'rogue'.
-- 1.3.6.1.4.1.388.11.2.7.2
ccRapAuth OBJECT IDENTIFIER ::= { ccRap 2 }
-- MIB values to configure the process of authorizing
-- newly discovered APs via a specific list of authorized
-- APs, (specified by AP MAC and/or ESSID, wildcarding
-- permitted).
-- 1.3.6.1.4.1.388.11.2.7.2.2
ccRapAuthList OBJECT IDENTIFIER ::= { ccRapAuth 2 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.1
ccRapAuthAllSymbolMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If TRUE, any newly-discovered AP that has a MAC address
with a Symbol vendor prefix is authorized, regardless
of the ESSID."
::= { ccRapAuthList 1 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.2
ccRapAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRapAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 'authorized' APs. There is no need to
include on this list any APs adopted by the switch.
Typically, this list will contain APs that are
located in neighboring stores/buildings that are
known by some means to NOT be rogue. So this is
the List of APs that are Authorized and upon heard
shall automatically be added to the Approved List
instead of labelling them as Rogue APs.
Note that this table persists across reboots.
"
::= { ccRapAuthList 2 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.2.1
ccRapAuthEntry OBJECT-TYPE
SYNTAX CcRapAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccRapAuthIndex }
::= { ccRapAuthTable 1 }
CcRapAuthEntry ::=
SEQUENCE {
ccRapAuthIndex
Unsigned32,
ccRapAuthMacFilter
PhysAddress,
ccRapAuthEssidFilter
DisplayString,
ccRapAuthRowExists
TruthValue
}
-- 1.3.6.1.4.1.388.11.2.7.2.2.2.1.1
ccRapAuthIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..24)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index."
::= { ccRapAuthEntry 1 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.2.1.2
ccRapAuthMacFilter OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC address of AP to consider 'authorized'.
To specify the entire MAC address as a wildcard,
(match any MAC address), use FF:FF:FF:FF:FF:FF.
(While it had been considered, it is NOT possible to
wildcard just the vendor portion of the MAC)."
::= { ccRapAuthEntry 2 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.2.1.3
ccRapAuthEssidFilter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ESSID of AP to consider 'authorized'.
Set to 33 '*' characters for wildcard, (to match
any ESSID). (ESSIDs must be 32ch or less)."
::= { ccRapAuthEntry 3 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.2.1.4
ccRapAuthRowExists OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A kludge to avoid RowStatus and save development
time.
Set this value to true when creating the row. Set
this value to false to destroy the row.
??- better name."
::= { ccRapAuthEntry 4 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.3
ccRapAuthErase OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to TRUE erases all AuthTable entries."
::= { ccRapAuthList 3 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.4
ccRapAuthCopyAllApproved OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Causes all ccRapResultsApprovedTable entries to be
immediately copied to the ccRapAuthTable."
::= { ccRapAuthList 4 }
-- 1.3.6.1.4.1.388.11.2.7.2.2.5
ccRapAuthCopyAllRogue OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Causes all ccRapResultsRogueTable entries to be
immediately copied to the ccRapAuthTable."
::= { ccRapAuthList 5 }
-- This group of MIB values report two tables that
-- collectively report all APs heard, (except those
-- Portals adopted by this switch).
-- 1.3.6.1.4.1.388.11.2.7.3
ccRapResults OBJECT IDENTIFIER ::= { ccRap 3 }
-- The APs represented in this group of MIB variables
-- are 'approved', meaning they have been authorized as
-- approved via one of the methods controlled in the
-- ccRapAuth group.
-- 1.3.6.1.4.1.388.11.2.7.3.1
ccRapResultsApproved OBJECT IDENTIFIER ::= { ccRapResults 1 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.1
ccRapResultsApprovedAgeOut OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If an entry in the _ResultsApproved table is not heard
by any means for this number of minutes, is elligable
to be removed from the table by the switch; (the
switch, however, might not remove the entry until
it gets around to it).
A value of 0 indicates that entries will never be
'aged-out' of the table.
The state of this variable persists across reboots.
The factory-default state is 1 week, (10080 min)."
::= { ccRapResultsApproved 1 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2
ccRapResultsApprovedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRapResultsApprovedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each AP MAC/ESSID combination heard by any enabled
detection method will be reported in this table, if it
has been determined to be 'approved' via one of the
enabled methods controlled in ccAuth.
Entries persist until that MAC/ESSID combination has
not been heard for _AgeOut minutes."
::= { ccRapResultsApproved 2 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1
ccRapResultsApprovedEntry OBJECT-TYPE
SYNTAX CcRapResultsApprovedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccRapResultsApprovedIndex }
::= { ccRapResultsApprovedTable 1 }
CcRapResultsApprovedEntry ::=
SEQUENCE {
ccRapResultsApprovedIndex
Unsigned32,
ccRapResultsApprovedApMac
PhysAddress,
ccRapResultsApprovedEssid
DisplayString,
ccRapResultsApprovedCopyToAuthTable
DoActionNow,
ccRapResultsApprovedFirstHeard
TimeTicks,
ccRapResultsApprovedLastHeard
TimeTicks,
ccRapResultsApprovedPortalPtr
MultiPointer255,
ccRapResultsApprovedHowFound
INTEGER,
ccRapResultsApprovedHowAuth
INTEGER,
ccRapResultsApprovedChannel
Integer32
}
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.1
ccRapResultsApprovedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRapResultsApprovedEntry 1 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.2
ccRapResultsApprovedApMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the heard AP."
::= { ccRapResultsApprovedEntry 2 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.3
ccRapResultsApprovedEssid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ESSID of the heard AP."
::= { ccRapResultsApprovedEntry 3 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.4
ccRapResultsApprovedCopyToAuthTable OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to TRUE, this entry is copied to the RuleTable."
::= { ccRapResultsApprovedEntry 4 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.5
ccRapResultsApprovedFirstHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime the first time this AP
MAC/ESSID combination was heard by any Symbol MU."
::= { ccRapResultsApprovedEntry 5 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.6
ccRapResultsApprovedLastHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime the most recent time this AP
MAC/ESSID combination was heard by any Symbol MU."
::= { ccRapResultsApprovedEntry 6 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.7
ccRapResultsApprovedPortalPtr OBJECT-TYPE
SYNTAX MultiPointer255
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A mask of Portal table entries. Those Portal
entries indicated by a '1' in this mask were at one
time the servicing Portal for an MU that reported
hearing this AP.
For a rogue of limited range in the parking lot on
the north side of a store, it would be expected that
only the Portals located in the north end of the
store would be indicated by this mask, thus giving
a rough indication of general direction of the
rogue."
::= { ccRapResultsApprovedEntry 7 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.8
ccRapResultsApprovedHowFound OBJECT-TYPE
SYNTAX INTEGER
{
viaSymbolMuPolling(1),
viaOnChannelDetection(2),
viaDetector(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the status of this AP.
??- I don't think we would report adoptedAp on the
results table, so don't need this enum value."
::= { ccRapResultsApprovedEntry 8 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.9
ccRapResultsApprovedHowAuth OBJECT-TYPE
SYNTAX INTEGER
{
onAuthList(1),
viaRadius(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes how this AP was authorized, (or not).
The order in which the various methods of authorizing APs
is attempted is exactly the numerical order of the enums.
??- I deleted adoptedAp, since it seems to me that there
is no good reason to report APs that this switch has
adopted."
::= { ccRapResultsApprovedEntry 9 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.2.1.10
ccRapResultsApprovedChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes on which channel this AP was found."
::= { ccRapResultsApprovedEntry 10 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.3
ccRapResultsApprovedErase OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to TRUE erases all Results entries.
Any APs heard after that event will be treated as newly
heard; (which means they will also generate notifications,
if enabled).
??- need 2nd scalar."
::= { ccRapResultsApproved 3 }
-- 1.3.6.1.4.1.388.11.2.7.3.1.4
ccRapNewApprovedAp NOTIFICATION-TYPE
OBJECTS { ccRapResultsApprovedPortalPtr, ccRapResultsApprovedHowFound, ccRapResultsApprovedHowAuth }
STATUS current
DESCRIPTION
"A new AP has been heard that was in some manner
authorized."
::= { ccRapResultsApproved 4 }
-- The APs represented in this group of MIB variables
-- are 'rogue', meaning they failed to be authorized as
-- approved via one of the methods controlled in the
-- ccRapAuth group.
-- 1.3.6.1.4.1.388.11.2.7.3.2
ccRapResultsRogue OBJECT IDENTIFIER ::= { ccRapResults 2 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.1
ccRapResultsRogueAgeOut OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If an entry in the _ResultsRogue table is not heard
by any means for this number of minutes, is elligable
to be removed from the table by the switch; (the
switch, however, might not remove the entry until
it gets around to it).
A value of 0 indicates that entries will never be
'aged-out' of the table.
The state of this variable persists across reboots.
The factory-default state is 1 week, (10080 min)."
::= { ccRapResultsRogue 1 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2
ccRapResultsRogueTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRapResultsRogueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each AP MAC/ESSID combination heard by any enabled
detection method will be reported in this table, if it
has NOT been determined to be 'approved' via one of
the enabled methods controlled in ccAuth.
Entries persist until that MAC/ESSID combination has
not been heard for _AgeOut minutes."
::= { ccRapResultsRogue 2 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1
ccRapResultsRogueEntry OBJECT-TYPE
SYNTAX CcRapResultsRogueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccRapResultsRogueIndex }
::= { ccRapResultsRogueTable 1 }
CcRapResultsRogueEntry ::=
SEQUENCE {
ccRapResultsRogueIndex
Unsigned32,
ccRapResultsRogueApMac
PhysAddress,
ccRapResultsRogueEssid
DisplayString,
ccRapResultsRogueCopyToAuthTable
DoActionNow,
ccRapResultsRogueFirstHeard
TimeTicks,
ccRapResultsRogueLastHeard
TimeTicks,
ccRapResultsRoguePortalPtr
MultiPointer255,
ccRapResultsRogueHowFound
INTEGER,
ccRapResultsRogueClosestPortalPtr
SinglePointer,
ccRapResultsRogueClosestPortalRssi
Integer32,
ccRapResultsRogueChannel
Integer32
}
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.1
ccRapResultsRogueIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRapResultsRogueEntry 1 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.2
ccRapResultsRogueApMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the heard AP."
::= { ccRapResultsRogueEntry 2 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.3
ccRapResultsRogueEssid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ESSID of the heard AP."
::= { ccRapResultsRogueEntry 3 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.4
ccRapResultsRogueCopyToAuthTable OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to TRUE, this entry is copied to the RuleTable."
::= { ccRapResultsRogueEntry 4 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.5
ccRapResultsRogueFirstHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime the first time this AP
MAC/ESSID combination was heard by any Symbol MU."
::= { ccRapResultsRogueEntry 5 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.6
ccRapResultsRogueLastHeard OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snapshot of sysUpTime the most recent time this AP
MAC/ESSID combination was heard by any Symbol MU."
::= { ccRapResultsRogueEntry 6 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.7
ccRapResultsRoguePortalPtr OBJECT-TYPE
SYNTAX MultiPointer255
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A mask of Portal table entries. Those Portal
entries indicated by a '1' in this mask were at one
time the servicing Portal for an MU that reported
hearing this AP.
For a rogue of limited range in the parking lot on
the north side of a store, it would be expected that
only the Portals located in the north end of the
store would be indicated by this mask, thus giving
a rough indication of general direction of the
rogue."
::= { ccRapResultsRogueEntry 7 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.8
ccRapResultsRogueHowFound OBJECT-TYPE
SYNTAX INTEGER
{
viaSymbolMuPolling(1),
viaOnChannelDetection(2),
viaDetector(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the status of this AP.
??- I don't think we would report adoptedAp on the
results table, so don't need this enum value."
::= { ccRapResultsRogueEntry 8 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.9
ccRapResultsRogueClosestPortalPtr OBJECT-TYPE
SYNTAX SinglePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to closest reporting Portal to the Rogue AP,
(where 'closest' is defined as greatest RSSI value
among all Portals reporting this AP)."
::= { ccRapResultsRogueEntry 9 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.10
ccRapResultsRogueClosestPortalRssi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI reported by the closest Portal."
::= { ccRapResultsRogueEntry 10 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.2.1.11
ccRapResultsRogueChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes on which channel this AP was found."
::= { ccRapResultsRogueEntry 11 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.3
ccRapResultsRogueErase OBJECT-TYPE
SYNTAX DoActionNow
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to TRUE erases all Results entries.
Any APs heard after that event will be treated as newly
heard; (which means they will also generate notifications,
if enabled).
??- need 2nd scalar."
::= { ccRapResultsRogue 3 }
-- 1.3.6.1.4.1.388.11.2.7.3.2.4
ccRapNewRogueAp NOTIFICATION-TYPE
OBJECTS { ccRapResultsRoguePortalPtr, ccRapResultsRogueHowFound }
STATUS current
DESCRIPTION
"A new AP has been heard that was NOT authorized."
::= { ccRapResultsRogue 4 }
-- The MIBs in this group aid in locating a Rogue AP.
--
-- While the Rogue detection algorithms run at prescribed
-- intervals, all methods in this group are 'one-shot' tests.
-- That is, MIB values are written, and the switch immediately
-- performs the specified operation and reports results. The
-- results are not impacted in any way by the on-going scans
-- configured above, (if any).
-- 1.3.6.1.4.1.388.11.2.7.4
ccRapLocate OBJECT IDENTIFIER ::= { ccRap 4 }
-- This group allows the user to initiate an immediate scan
-- of all configured Portals for a specified Rogue AP.
-- 1.3.6.1.4.1.388.11.2.7.4.1
ccRapPortalResults OBJECT IDENTIFIER ::= { ccRapLocate 1 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.1
ccRapPortalResultsApMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the AP to be reported.
(No wildcarding of the AP MAC is allowed. If it
were, several APs could be found that match the
selection criteria)."
::= { ccRapPortalResults 1 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.2
ccRapPortalResultsApEssid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ESSID of the AP to be reported.
(No wildcarding of the AP ESSID is allowed. If it
were, several APs could be found that match the
selection criteria)."
::= { ccRapPortalResults 2 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.3
ccRapPortalResultsInProcess OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to true erases the _PortalResultsTable, and
immediately initiates a scan of all Portals currently
enabled in ccRapControlOnChannel and ccRapControlDetectors.
The switch does NOT wait until the next scan interval(s),
but performs the scan immediately; (a human is most likely
waiting for the results in mere seconds).
Once the switch has completed scanning all enabled Portals,
it sets this value to false."
::= { ccRapPortalResults 3 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.4
ccRapPortalResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRapPortalResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each (enabled/configured) Portal that hears the specified
AP's MAC/ESSID combination will be reported as one entry
in this table.
For a rogue of limited range in the parking lot on
the north side of a store, it would be expected that
only the Portals located in the north end of the
store would be indicated by this mask, thus giving
a rough indication of general direction of the
rogue.
Individual RSSI values combined with exact locations of the
Portals can be used to triangulate the approximate position
of the Rogue."
::= { ccRapPortalResults 4 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.4.1
ccRapPortalResultsEntry OBJECT-TYPE
SYNTAX CcRapPortalResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccRapPortalResultsIndex }
::= { ccRapPortalResultsTable 1 }
CcRapPortalResultsEntry ::=
SEQUENCE {
ccRapPortalResultsIndex
Unsigned32,
ccRapPortalResultsPortalMac
PhysAddress,
ccRapPortalResultsRssi
Integer32
}
-- 1.3.6.1.4.1.388.11.2.7.4.1.4.1.1
ccRapPortalResultsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRapPortalResultsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.4.1.2
ccRapPortalResultsPortalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the Portal reporting having heard the
specified AP."
::= { ccRapPortalResultsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.7.4.1.4.1.3
ccRapPortalResultsRssi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI value heard by the Portal."
::= { ccRapPortalResultsEntry 3 }
-- This group contains the MIB variables used to
-- initiate an immediate poll of a single Symbol MU, in order
-- to use that MU as a roving agent to find the Rogue.
-- 1.3.6.1.4.1.388.11.2.7.4.2
ccRapPollOneMu OBJECT IDENTIFIER ::= { ccRapLocate 2 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.1
ccRapPollOneMuMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing this value with the MAC address of a MU
causes the switch to read that MU's known AP list.
This read is performed just once, (it is not repeated).
This read occurs regardless of the state of
ccRapPollSymbolMusEnable. The read is also performed
immediately - the switch does NOT wait until the next
Sybmol MU poll interval, (as specified in
ccRapPollSymbolMusInterval)."
::= { ccRapPollOneMu 1 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.2
ccRapPollOneMuInProcess OBJECT-TYPE
SYNTAX DoActionShowProgress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting to true initiates the polling of one
specified MU's known AP table.
Once the switch receives a response from the
requested MU, it sets this value to false.
If the network management software sets this value
to false, any future response from the MU will be
ignored."
::= { ccRapPollOneMu 2 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.3
ccRapPollOneMuStatus OBJECT-TYPE
SYNTAX INTEGER
{
notSymbolRogueEnabled(1),
symbolRogueEnabled(2),
notAssociated(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes if the MU is associated or not, and if so,
if the MU is Symbol Rogue detect enabled or not."
::= { ccRapPollOneMu 3 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.4
ccRapPollOneMuResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRapPollOneMuResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Shows the known AP table as read from the specified MU.
This table is NOT cumulative; that is, it only
reflects exactly what was read from the most recent
read of the specified MU's known AP table.
If a non-Symbol MUs is specified, or if the MU is not
currently associated with any Portal, the resulting table
will be empty."
::= { ccRapPollOneMu 4 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.4.1
ccRapPollOneMuResultsEntry OBJECT-TYPE
SYNTAX CcRapPollOneMuResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { ccRapPollOneMuResultsIndex }
::= { ccRapPollOneMuResultsTable 1 }
CcRapPollOneMuResultsEntry ::=
SEQUENCE {
ccRapPollOneMuResultsIndex
Unsigned32,
ccRapPollOneMuResultsRssi
Integer32,
ccRapPollOneMuResultsEssid
DisplayString,
ccRapPollOneMuResultsApMac
PhysAddress
}
-- 1.3.6.1.4.1.388.11.2.7.4.2.4.1.1
ccRapPollOneMuResultsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1000000000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple index into the table."
::= { ccRapPollOneMuResultsEntry 1 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.4.1.2
ccRapPollOneMuResultsRssi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI reported for that known AP."
::= { ccRapPollOneMuResultsEntry 2 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.4.1.3
ccRapPollOneMuResultsEssid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ESSID of the heard AP."
::= { ccRapPollOneMuResultsEntry 3 }
-- 1.3.6.1.4.1.388.11.2.7.4.2.4.1.4
ccRapPollOneMuResultsApMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the heard AP."
::= { ccRapPollOneMuResultsEntry 4 }
-- 1.3.6.1.4.1.388.11.2.8
ccRadiusServer OBJECT IDENTIFIER ::= { ws2k 8 }
-- 1.3.6.1.4.1.388.11.2.8.1
ccRadius OBJECT IDENTIFIER ::= { ccRadiusServer 1 }
-- ??-CSM: what happens when hit 'server certificate'
-- and 'CA certificate' buttons? Add MIBs for these.
--
-- 1.3.6.1.4.1.388.11.2.8.1.1
ccRadiusDataSource OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
ldap(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source of data for authentication. It can be local database
on the switch or LDAP database i.e ADS or openLDAP"
::= { ccRadius 1 }
--
--
-- 1.3.6.1.4.1.388.11.2.8.1.2
ccRadiusDefaultEapType OBJECT-TYPE
SYNTAX INTEGER
{
ttls(1),
peap(2),
tls(3),
all(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default EAP type advertised by the radius server."
::= { ccRadius 2 }
-- EAP type enabled on the switch
--
-- Type of EAP type within PEAP
--
-- 1.3.6.1.4.1.388.11.2.8.1.4
ccRadiusAuthTypePeap OBJECT-TYPE
SYNTAX INTEGER
{
gtc(1),
msChap2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of EAP type within PEAP
"
::= { ccRadius 4 }
-- Type of EAP type within TTLS
-- 1.3.6.1.4.1.388.11.2.8.1.5
ccRadiusAuthTypeTtls OBJECT-TYPE
SYNTAX INTEGER
{
md5(1),
pap(2),
msChap2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of EAP type within TTLS"
::= { ccRadius 5 }
-- Id of the ceritificate used by RADIUS
--
-- 1.3.6.1.4.1.388.11.2.8.1.6
ccRadiusServerCertificate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Id of the ceritificate used by RADIUS
"
::= { ccRadius 6 }
-- ID of the CA certificate used by RADIUS
--
-- 1.3.6.1.4.1.388.11.2.8.1.7
ccRadiusCACertificate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ID of the CA certificate used by RADIUS"
::= { ccRadius 7 }
-- List of client which are authorised by the radius server
--
-- 1.3.6.1.4.1.388.11.2.8.1.8
ccRadiusClientAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRadiusClientAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Radius Client Entries."
::= { ccRadius 8 }
-- 1.3.6.1.4.1.388.11.2.8.1.8.1
ccRadiusClientAuthEntry OBJECT-TYPE
SYNTAX CcRadiusClientAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccRadiusClientAuthIndex }
::= { ccRadiusClientAuthTable 1 }
CcRadiusClientAuthEntry ::=
SEQUENCE {
ccRadiusClientAuthIndex
Unsigned32,
ccRadiusClientAuthIpAddr
IpAddress,
ccRadiusClientAuthMask
IpAddress,
ccRadiusClientAuthSharedSecret
Password,
ccRadiusClientAuthRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.8.1.8.1.1
ccRadiusClientAuthIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRadiusClientAuthEntry 1 }
-- IP address
-- 1.3.6.1.4.1.388.11.2.8.1.8.1.2
ccRadiusClientAuthIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the client
"
::= { ccRadiusClientAuthEntry 2 }
-- 1.3.6.1.4.1.388.11.2.8.1.8.1.3
ccRadiusClientAuthMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask of the client's IP address
"
::= { ccRadiusClientAuthEntry 3 }
-- 1.3.6.1.4.1.388.11.2.8.1.8.1.4
ccRadiusClientAuthSharedSecret OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret between the client and the radius server
"
::= { ccRadiusClientAuthEntry 4 }
-- 1.3.6.1.4.1.388.11.2.8.1.8.1.5
ccRadiusClientAuthRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status.
"
::= { ccRadiusClientAuthEntry 5 }
-- 1.3.6.1.4.1.388.11.2.8.2
ccRadiusProxy OBJECT IDENTIFIER ::= { ccRadiusServer 2 }
-- 1.3.6.1.4.1.388.11.2.8.2.1
ccRadiusProxyRetryCount OBJECT-TYPE
SYNTAX INTEGER (3..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries for sending messages to a proxy
"
::= { ccRadiusProxy 1 }
-- 1.3.6.1.4.1.388.11.2.8.2.2
ccRadiusProxyTimeout OBJECT-TYPE
SYNTAX INTEGER (5..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TImeout in seconds before retrying to a proxy
"
::= { ccRadiusProxy 2 }
-- 1.3.6.1.4.1.388.11.2.8.2.3
ccRadiusProxyServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRadiusProxyServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Proxy Realm Entries."
::= { ccRadiusProxy 3 }
-- ??-CSM: limited number of entries? if not, change to AbbrevRowStatus.
--
-- 1.3.6.1.4.1.388.11.2.8.2.3.1
ccRadiusProxyServerEntry OBJECT-TYPE
SYNTAX CcRadiusProxyServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccRadiusProxyServerIndex }
::= { ccRadiusProxyServerTable 1 }
CcRadiusProxyServerEntry ::=
SEQUENCE {
ccRadiusProxyServerIndex
Unsigned32,
ccRadiusProxyServerPrefixOrSuffix
DisplayString,
ccRadiusProxyServerIp
IpAddress,
ccRadiusProxyServerPort
Integer32,
ccRadiusProxyServerSharedSecret
Password,
ccRadiusProxyServerRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.1
ccRadiusProxyServerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..5)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Simple Index."
::= { ccRadiusProxyServerEntry 1 }
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.2
ccRadiusProxyServerPrefixOrSuffix OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prefix of suffix used for proxying radius request to a
proxy server
"
::= { ccRadiusProxyServerEntry 2 }
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.3
ccRadiusProxyServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the proxy server
"
::= { ccRadiusProxyServerEntry 3 }
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.4
ccRadiusProxyServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of proxy server
"
::= { ccRadiusProxyServerEntry 4 }
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.5
ccRadiusProxyServerSharedSecret OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret between radius server and proxy server
"
::= { ccRadiusProxyServerEntry 5 }
-- 1.3.6.1.4.1.388.11.2.8.2.3.1.6
ccRadiusProxyServerRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row Status.
"
::= { ccRadiusProxyServerEntry 6 }
-- 1.3.6.1.4.1.388.11.2.8.3
ccRadiusLdap OBJECT IDENTIFIER ::= { ccRadiusServer 3 }
-- 1.3.6.1.4.1.388.11.2.8.3.1
ccRadiusLdapServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the LDAP server
"
::= { ccRadiusLdap 1 }
-- 1.3.6.1.4.1.388.11.2.8.3.2
ccRadiusLdapServerPort OBJECT-TYPE
SYNTAX INTEGER (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port of the LDAP server
"
::= { ccRadiusLdap 2 }
-- 1.3.6.1.4.1.388.11.2.8.3.3
ccRadiusLdapLoginAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the login attribute used by LDAP for authenticating the
user.
"
::= { ccRadiusLdap 3 }
-- 1.3.6.1.4.1.388.11.2.8.3.4
ccRadiusLdapPasswordAttribute OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the login attribute used by LDAP for authenticating the
user.
"
::= { ccRadiusLdap 4 }
-- 1.3.6.1.4.1.388.11.2.8.3.5
ccRadiusLdapBindDistinguishedName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bind DN used the LDAP client on the WS2000 to connect to
a LDAP server
"
::= { ccRadiusLdap 5 }
-- 1.3.6.1.4.1.388.11.2.8.3.6
ccRadiusLdapBindDistinguishedPassword OBJECT-TYPE
SYNTAX Password
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bind password used the LDAP client on the WS2000 to connect to
a LDAP server"
::= { ccRadiusLdap 6 }
-- 1.3.6.1.4.1.388.11.2.8.3.7
ccRadiusLdapBaseDistinguishedName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Base DN used the LDAP client on the WS2000 to connect to
a LDAP server."
::= { ccRadiusLdap 7 }
-- 1.3.6.1.4.1.388.11.2.8.3.8
ccRadiusLdapGroupAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the group attribute used by LDAP for retrieving the
group associated with a user
"
::= { ccRadiusLdap 8 }
-- 1.3.6.1.4.1.388.11.2.8.3.9
ccRadiusLdapGroupFilter OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter specification used by the LDAP client to retrieve
the groups associated with a user
"
::= { ccRadiusLdap 9 }
-- 1.3.6.1.4.1.388.11.2.8.3.10
ccRadiusLdapGroupMembershipAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the attribute in the user schema which specifies
groups associated with the user. This is used if the
group filter specified by ccRadiusGroupFilter return
an error.
"
::= { ccRadiusLdap 10 }
-- 1.3.6.1.4.1.388.11.2.8.4
ccRadiusUsers OBJECT IDENTIFIER ::= { ccRadiusServer 4 }
-- ??-CSM: who else uses the local user database?
-- depending on that answer, maybe this doesn't go under ccRadius?
-- 1.3.6.1.4.1.388.11.2.8.4.1
ccRadiusUsersGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRadiusUsersGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of Group entries."
::= { ccRadiusUsers 1 }
-- 1.3.6.1.4.1.388.11.2.8.4.1.1
ccRadiusUsersGroupEntry OBJECT-TYPE
SYNTAX CcRadiusUsersGroupEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
INDEX { ccRadiusUsersGroup }
::= { ccRadiusUsersGroupTable 1 }
CcRadiusUsersGroupEntry ::=
SEQUENCE {
ccRadiusUsersGroup
DisplayString,
ccRadiusUsersGroupRowStatus
AbbrevRowStatus,
ccRadiusUsersGroupId
Integer32
}
-- 1.3.6.1.4.1.388.11.2.8.4.1.1.1
ccRadiusUsersGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Name of the group
"
::= { ccRadiusUsersGroupEntry 1 }
-- 1.3.6.1.4.1.388.11.2.8.4.1.1.2
ccRadiusUsersGroupRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Row status
"
::= { ccRadiusUsersGroupEntry 2 }
-- 1.3.6.1.4.1.388.11.2.8.4.1.1.3
ccRadiusUsersGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Actual index of that Group in the Configuration.
Added to solve a problem encountered by SEMM
for resolving the Multipointer ccRadiusUsersGroups."
::= { ccRadiusUsersGroupEntry 3 }
-- 1.3.6.1.4.1.388.11.2.8.4.2
ccRadiusUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRadiusUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of User entries."
::= { ccRadiusUsers 2 }
-- 1.3.6.1.4.1.388.11.2.8.4.2.1
ccRadiusUsersEntry OBJECT-TYPE
SYNTAX CcRadiusUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ccRadiusUsersId }
::= { ccRadiusUsersTable 1 }
CcRadiusUsersEntry ::=
SEQUENCE {
ccRadiusUsersId
DisplayString,
ccRadiusUsersPassword
Password,
ccRadiusUsersGroups
BITS,
ccRadiusUsersRowStatus
AbbrevRowStatus
}
-- 1.3.6.1.4.1.388.11.2.8.4.2.1.1
ccRadiusUsersId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User name."
::= { ccRadiusUsersEntry 1 }
-- 1.3.6.1.4.1.388.11.2.8.4.2.1.2
ccRadiusUsersPassword OBJECT-TYPE
SYNTAX Password (SIZE (1..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Password."
::= { ccRadiusUsersEntry 2 }
-- 1.3.6.1.4.1.388.11.2.8.4.2.1.3
ccRadiusUsersGroups OBJECT-TYPE
SYNTAX BITS
{
null(0),
group1(1),
group2(2),
group3(3),
group4(4),
group5(5),
group6(6),
group7(7),
group8(8),
group9(9),
group10(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"List of groups associated with the user.
Note that if a group is deleted, the
corresponding bit pointing to that group
will be cleared in this variable for all
users that previously had it set."
::= { ccRadiusUsersEntry 3 }
-- 1.3.6.1.4.1.388.11.2.8.4.2.1.4
ccRadiusUsersRowStatus OBJECT-TYPE
SYNTAX AbbrevRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row Status."
::= { ccRadiusUsersEntry 4 }
-- 1.3.6.1.4.1.388.11.2.8.5
ccRadiusAccess OBJECT IDENTIFIER ::= { ccRadiusServer 5 }
-- 1.3.6.1.4.1.388.11.2.8.5.1
ccRadiusAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcRadiusAccessEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of Access Policy entries."
::= { ccRadiusAccess 1 }
-- 1.3.6.1.4.1.388.11.2.8.5.1.1
ccRadiusAccessEntry OBJECT-TYPE
SYNTAX CcRadiusAccessEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Acess table entry specifying the the WLANs allowed for each
group
"
INDEX { ccRadiusUsersGroup }
::= { ccRadiusAccessTable 1 }
CcRadiusAccessEntry ::=
SEQUENCE {
ccRadiusAccessWlanPtrs
BITS
}
-- 1.3.6.1.4.1.388.11.2.8.5.1.1.2
ccRadiusAccessWlanPtrs OBJECT-TYPE
SYNTAX BITS
{
null(0),
wlan1(1),
wlan2(2),
wlan3(3),
wlan4(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Points to the zero or more WLANs for which the given
GroupId is allowed access.
"
::= { ccRadiusAccessEntry 2 }
-- !!- OID: located at .1000 to save room above.
-- 1.3.6.1.4.1.388.11.2.1000
ccGroups OBJECT IDENTIFIER ::= { ws2k 1000 }
-- 1.3.6.1.4.1.388.11.2.1000.1
ccGroupsV1dot0 OBJECT IDENTIFIER ::= { ccGroups 1 }
-- 1.3.6.1.4.1.388.11.2.1000.1.1
ccAdminGroup OBJECT-GROUP
OBJECTS { ccInfoSerialNumber, ccResetFactory, ccResetSwitch, ccLoadFwOperation, ccLoadFwInterface,
ccLoadFwServerPath, ccLoadFwServerFilename, ccLoadFwStart, ccLoadFwResult, ccLoadFwSuccess,
ccLoadCfgOperation, ccLoadCfgServerPath, ccLoadCfgServerFilename, ccLoadCfgStart, ccLoadCfgOperationsDone,
ccLoadCfgResult, ccLoadCfgSuccess, ccCfgHistChangeCount, ccCfgHistChangeTime, ccCfgHistSemaphore,
ccSnmpLastDeniedIpAddr, ccSnmpAclViolations, ccLoadServerIpAddr, ccLoadFtpUsername }
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 1 }
-- 1.3.6.1.4.1.388.11.2.1000.1.2
ccNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { ccPortalAdopted, ccPortalUnAdopted, ccPortalDenied, ccMuAssociated, ccMuUnAssociated,
ccMuDenied, ccSnmpAclViolation, ccConfigChange }
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 2 }
-- 1.3.6.1.4.1.388.11.2.1000.1.3
ccApGroup OBJECT-GROUP
OBJECTS { ccApIndex, ccApNicMac, ccApModelNumber, ccApSerialNumber, ccApPcbRevision,
ccApBootLoaderRev, ccApWispVersion, ccApRuntimeFwVersion, ccApNumPortals, ccApPointersToPortals
}
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 3 }
-- 1.3.6.1.4.1.388.11.2.1000.1.4
ccPortalGroup OBJECT-GROUP
OBJECTS { ccPortalIndex, ccPortalPointerToAp, ccPortalPointersToWlans, ccPortalOptions, ccPortalMac,
ccPortalNumberOfEss, ccPortalNumberOfBss, ccPortalAssociatedMus, ccPortalChannel, ccPortalTxPowerLevel,
ccPortalLastMac, ccPortalLastReason, ccPortalName, ccPortalLocation, ccPortalLastAdoption,
ccPortalRadioType }
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 4 }
-- 1.3.6.1.4.1.388.11.2.1000.1.5
ccAssociationGroup OBJECT-GROUP
OBJECTS { ccAssociationFirstAssociate, ccAssociationLastAssociate, ccAssociationCountAssociates }
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 5 }
-- 1.3.6.1.4.1.388.11.2.1000.1.6
ccMuGroup OBJECT-GROUP
OBJECTS { ccMuMac, ccMuWlanIndex, ccMuWlanName, ccMuPortalIndex, ccMuPortalMac,
ccMuSymbolRogueApEna, ccMuIpAddr, ccMuType, ccMuRadioType, ccMuSupportedRates,
ccMuPowerMode, ccMuAuthenticationMethod, ccMuEncryptionMethod, ccMuRxPktsUcast, ccMuTxPktsUcast,
ccMuRxOctetsUcast, ccMuTxOctetsUcast, ccMuRxUndecryptablePkts, ccMuRxRssiNumPkts, ccMuRxRssiSum,
ccMuRxRssiSumSquares, ccMuRxRssiMostRecent, ccMuLastActivity, ccMuRxPktsAt1Mb, ccMuRxPktsAt2Mb,
ccMuRxPktsAt5pt5Mb, ccMuRxPktsAt6Mb, ccMuRxPktsAt9Mb, ccMuRxPktsAt11Mb, ccMuRxPktsAt12Mb,
ccMuRxPktsAt18Mb, ccMuRxPktsAt22Mb, ccMuRxPktsAt24Mb, ccMuRxPktsAt36Mb, ccMuRxPktsAt48Mb,
ccMuRxPktsAt54Mb, ccMuTxPktsAt1Mb, ccMuTxPktsAt2Mb, ccMuTxPktsAt5pt5Mb, ccMuTxPktsAt6Mb,
ccMuTxPktsAt9Mb, ccMuTxPktsAt11Mb, ccMuTxPktsAt12Mb, ccMuTxPktsAt18Mb, ccMuTxPktsAt22Mb,
ccMuTxPktsAt24Mb, ccMuTxPktsAt36Mb, ccMuTxPktsAt48Mb, ccMuTxPktsAt54Mb, ccMuRxOctetsAt1Mb,
ccMuRxOctetsAt2Mb, ccMuRxOctetsAt5pt5Mb, ccMuRxOctetsAt6Mb, ccMuRxOctetsAt9Mb, ccMuRxOctetsAt11Mb,
ccMuRxOctetsAt12Mb, ccMuRxOctetsAt18Mb, ccMuRxOctetsAt22Mb, ccMuRxOctetsAt24Mb, ccMuRxOctetsAt36Mb,
ccMuRxOctetsAt48Mb, ccMuRxOctetsAt54Mb, ccMuTxOctetsAt1Mb, ccMuTxOctetsAt2Mb, ccMuTxOctetsAt5pt5Mb,
ccMuTxOctetsAt6Mb, ccMuTxOctetsAt9Mb, ccMuTxOctetsAt11Mb, ccMuTxOctetsAt12Mb, ccMuTxOctetsAt18Mb,
ccMuTxOctetsAt22Mb, ccMuTxOctetsAt24Mb, ccMuTxOctetsAt36Mb, ccMuTxOctetsAt48Mb, ccMuTxOctetsAt54Mb,
ccMuTxRetries01, ccMuTxRetries02, ccMuTxRetries03, ccMuTxRetries04, ccMuTxRetries05,
ccMuTxRetries06, ccMuTxRetries07, ccMuTxRetries08, ccMuTxRetries09, ccMuTxRetries10,
ccMuTxRetries11, ccMuTxRetries12, ccMuTxRetries13, ccMuTxRetries14, ccMuTxRetries15,
ccMuTxRetriesNone, ccMuTxRetriesFailed, ccMuTxRetriesTotal, ccMuLastPortal, ccMuTxRetriesMostRecent,
ccMuLastMac, ccMuLastReason, ccMuIsDataReady }
STATUS current
DESCRIPTION
" "
::= { ccGroupsV1dot0 6 }
-- 1.3.6.1.4.1.388.11.2.1000.2
ccGroupsV1dot5 OBJECT IDENTIFIER ::= { ccGroups 2 }
-- 1.3.6.1.4.1.388.11.2.1000.2.1
ccGroupsV1dot5variables OBJECT-GROUP
OBJECTS { ccInfoSerialNumber, ccInfoCountrySelection, ccIdHwVersion, ccIdFwVersion, ccIdSwVersion,
ccIdMibVersion, ccIdCliVersion, ccIdXmlVersion, ccIdSerialNumber, ccResetFactory,
ccResetSwitch, ccResetFactoryExceptIpSnmp, ccLoadFwOperation, ccLoadFwInterface, ccLoadFwServerPath,
ccLoadFwServerFilename, ccLoadFwStart, ccLoadFwResult, ccLoadFwSuccess, ccLoadCfgOperation,
ccLoadCfgServerPath, ccLoadCfgServerFilename, ccLoadCfgStart, ccLoadCfgOperationsDone, ccLoadCfgResult,
ccLoadCfgSuccess, ccCfgHistChangeCount, ccCfgHistChangeTime, ccCfgHistSemaphore, ccLoadServerIpAddr,
ccLoadFtpUsername, ccLoadFtpPassword, ccSnmpAclViolations, ccSnmpLastDeniedIpAddr, ccCompactFlashCapacity,
ccCompactFlashUsed, ccSumStatsShortWindow, ccSumStatsShortUpdateInterval, ccSumStatsLongWindow, ccSumStatsLongUpdateInterval,
ccTrapCtrlCfAlmostFullThreshold, ccTrapCtrlFirewallUnderAttackDescription, ccTrapCtrlFirewallUnderAttackRateLimit, ccTrapCtrlRadarDetectedPortalMac, ccTrapCtrlRadarDetectedChannel,
ccTrapCtrlSumStatsIndex, ccTrapCtrlSumStatsDescr, ccTrapCtrlSumStatsUnits, ccTrapCtrlSumStatsCanBeSetMu, ccTrapCtrlSumStatsThresholdMu,
ccTrapCtrlSumStatsCanBeSetPortal, ccTrapCtrlSumStatsThresholdPortals, ccTrapCtrlSumStatsCanBeSetWlan, ccTrapCtrlSumStatsThresholdWlans, ccTrapCtrlSumStatsCanBeSetSwitch,
ccTrapCtrlSumStatsThresholdSwitch, ccTrapCtrlSumStatsMinPktsForTrap, ccApIndex, ccApNicMac, ccApModelNumber,
ccApSerialNumber, ccApPcbRevision, ccApBootLoaderRev, ccApWispVersion, ccApRuntimeFwVersion,
ccApNumPortals, ccApPointersToPortals, ccPortalIndex, ccPortalPointerToAp, ccPortalPointersToWlans,
ccPortalName, ccPortalLocation, ccPortalOptions, ccPortalMac, ccPortalNumberOfEss,
ccPortalNumberOfBss, ccPortalAssociatedMus, ccPortalRadioType, ccPortalChannel, ccPortalTxPowerLevel,
ccPortalLastAdoption, ccPortalState, ccPortalLastMac, ccPortalLastReason, ccPortalSystemStatsBeaconsTx,
ccPortalSystemStatsBeaconsTxOctets, ccPortalSystemStatsProbeReqRx, ccPortalSystemStatsProbeReqRxOctets, ccPortalSystemStatsProbeRespRetriesNone, ccPortalSystemStatsProbeRespRetries1,
ccPortalSystemStatsProbeRespRetries2, ccPortalSystemStatsProbeRespRetriesFailed, ccPortalSystemStatsProbeRespTxOctets, ccPortalTxPktsUcast, ccPortalRxPktsUcast,
ccPortalRxPktsNUcast, ccPortalTxOctetsUcast, ccPortalRxOctetsUcast, ccPortalRxOctetsNUcast, ccPortalRxUndecryptablePkts,
ccPortalLastActivity, ccPortalRxPktsAt1Mb, ccPortalRxPktsAt2Mb, ccPortalRxPktsAt5pt5Mb, ccPortalRxPktsAt6Mb,
ccPortalRxPktsAt9Mb, ccPortalRxPktsAt11Mb, ccPortalRxPktsAt12Mb, ccPortalRxPktsAt18Mb, ccPortalRxPktsAt22Mb,
ccPortalRxPktsAt24Mb, ccPortalRxPktsAt36Mb, ccPortalRxPktsAt48Mb, ccPortalRxPktsAt54Mb, ccPortalTxPktsAt1Mb,
ccPortalTxPktsAt2Mb, ccPortalTxPktsAt5pt5Mb, ccPortalTxPktsAt6Mb, ccPortalTxPktsAt9Mb, ccPortalTxPktsAt11Mb,
ccPortalTxPktsAt12Mb, ccPortalTxPktsAt18Mb, ccPortalTxPktsAt22Mb, ccPortalTxPktsAt24Mb, ccPortalTxPktsAt36Mb,
ccPortalTxPktsAt48Mb, ccPortalTxPktsAt54Mb, ccPortalRxOctetsAt1Mb, ccPortalRxOctetsAt2Mb, ccPortalRxOctetsAt5pt5Mb,
ccPortalRxOctetsAt6Mb, ccPortalRxOctetsAt9Mb, ccPortalRxOctetsAt11Mb, ccPortalRxOctetsAt12Mb, ccPortalRxOctetsAt18Mb,
ccPortalRxOctetsAt22Mb, ccPortalRxOctetsAt24Mb, ccPortalRxOctetsAt36Mb, ccPortalRxOctetsAt48Mb, ccPortalRxOctetsAt54Mb,
ccPortalTxOctetsAt1Mb, ccPortalTxOctetsAt2Mb, ccPortalTxOctetsAt5pt5Mb, ccPortalTxOctetsAt6Mb, ccPortalTxOctetsAt9Mb,
ccPortalTxOctetsAt11Mb, ccPortalTxOctetsAt12Mb, ccPortalTxOctetsAt18Mb, ccPortalTxOctetsAt22Mb, ccPortalTxOctetsAt24Mb,
ccPortalTxOctetsAt36Mb, ccPortalTxOctetsAt48Mb, ccPortalTxOctetsAt54Mb, ccPortalTxRetriesPktsNone, ccPortalTxRetriesPkts01,
ccPortalTxRetriesPkts02, ccPortalTxRetriesPkts03, ccPortalTxRetriesPkts04, ccPortalTxRetriesPkts05, ccPortalTxRetriesPkts06,
ccPortalTxRetriesPkts07, ccPortalTxRetriesPkts08, ccPortalTxRetriesPkts09, ccPortalTxRetriesPkts10, ccPortalTxRetriesPkts11,
ccPortalTxRetriesPkts12, ccPortalTxRetriesPkts13, ccPortalTxRetriesPkts14, ccPortalTxRetriesPkts15, ccPortalTxRetriesPktsFailed,
ccPortalTxRetriesOctetsNone, ccPortalTxRetriesOctets01, ccPortalTxRetriesOctets02, ccPortalTxRetriesOctets03, ccPortalTxRetriesOctets04,
ccPortalTxRetriesOctets05, ccPortalTxRetriesOctets06, ccPortalTxRetriesOctets07, ccPortalTxRetriesOctets08, ccPortalTxRetriesOctets09,
ccPortalTxRetriesOctets10, ccPortalTxRetriesOctets11, ccPortalTxRetriesOctets12, ccPortalTxRetriesOctets13, ccPortalTxRetriesOctets14,
ccPortalTxRetriesOctets15, ccPortalTxRetriesOctetsFailed, ccPortalSigStatsNumPkts, ccPortalSigStatsSignalBest, ccPortalSigStatsSignalWorst,
ccPortalSigStatsSignalSum, ccPortalSigStatsSignalSumSquares, ccPortalSigStatsSignalMostRecent, ccPortalSigStatsNoiseBest, ccPortalSigStatsNoiseWorst,
ccPortalSigStatsNoiseSum, ccPortalSigStatsNoiseSumSquares, ccPortalSigStatsNoiseMostRecent, ccPortalSigStatsSnrBest, ccPortalSigStatsSnrWorst,
ccPortalSigStatsSnrSum, ccPortalSigStatsSnrSumSquares, ccPortalSigStatsSnrMostRecent, ccPortalSumStatsShortTimestamp, ccPortalSumStatsShortNumPkts,
ccPortalSumStatsShortPktsPerSec100, ccPortalSumStatsShortPktsPerSecTx100, ccPortalSumStatsShortPktsPerSecRx100, ccPortalSumStatsShortThroughput, ccPortalSumStatsShortThroughputTx,
ccPortalSumStatsShortThroughputRx, ccPortalSumStatsShortAvgBitSpeed, ccPortalSumStatsShortAvgMuSignal, ccPortalSumStatsShortAvgMuNoise, ccPortalSumStatsShortAvgMuSnr,
ccPortalSumStatsShortPp10kNUcastPkts, ccPortalSumStatsShortPp10kTxWithRetries, ccPortalSumStatsShortTxAvgRetries100, ccPortalSumStatsShortPp10kRxUndecrypt, ccPortalSumStatsShortTotalMus,
ccPortalSumStatsShortPp10kRfUtil, ccPortalSumStatsLongTimestamp, ccPortalSumStatsLongNumPkts, ccPortalSumStatsLongPktsPerSec100, ccPortalSumStatsLongPktsPerSecTx100,
ccPortalSumStatsLongPktsPerSecRx100, ccPortalSumStatsLongThroughput, ccPortalSumStatsLongThroughputTx, ccPortalSumStatsLongThroughputRx, ccPortalSumStatsLongAvgBitSpeed,
ccPortalSumStatsLongAvgMuSignal, ccPortalSumStatsLongAvgMuNoise, ccPortalSumStatsLongAvgMuSnr, ccPortalSumStatsLongPp10kNUcastPkts, ccPortalSumStatsLongPp10kTxWithRetries,
ccPortalSumStatsLongTxAvgRetries100, ccPortalSumStatsLongPp10kRxUndecrypt, ccPortalSumStatsLongTotalMus, ccPortalSumStatsLongPp10kRfUtil, ccAssociationFirstAssociate,
ccAssociationLastAssociate, ccAssociationCountAssociates, ccMuMac, ccMuWlanIndex, ccMuWlanName,
ccMuIsDataReady, ccMuPortalIndex, ccMuPortalMac, ccMuSymbolRogueApEna, ccMuIpAddr,
ccMuType, ccMuRadioType, ccMuSupportedRates, ccMuPowerMode, ccMuAuthenticationMethod,
ccMuEncryptionMethod, ccMuTxPktsUcast, ccMuRxPktsUcast, ccMuTxOctetsUcast, ccMuRxOctetsUcast,
ccMuRxUndecryptablePkts, ccMuRxRssiNumPkts, ccMuRxRssiSum, ccMuRxRssiSumSquares, ccMuRxRssiMostRecent,
ccMuLastActivity, ccMuRxPktsAt1Mb, ccMuRxPktsAt2Mb, ccMuRxPktsAt5pt5Mb, ccMuRxPktsAt6Mb,
ccMuRxPktsAt9Mb, ccMuRxPktsAt11Mb, ccMuRxPktsAt12Mb, ccMuRxPktsAt18Mb, ccMuRxPktsAt22Mb,
ccMuRxPktsAt24Mb, ccMuRxPktsAt36Mb, ccMuRxPktsAt48Mb, ccMuRxPktsAt54Mb, ccMuTxPktsAt1Mb,
ccMuTxPktsAt2Mb, ccMuTxPktsAt5pt5Mb, ccMuTxPktsAt6Mb, ccMuTxPktsAt9Mb, ccMuTxPktsAt11Mb,
ccMuTxPktsAt12Mb, ccMuTxPktsAt18Mb, ccMuTxPktsAt22Mb, ccMuTxPktsAt24Mb, ccMuTxPktsAt36Mb,
ccMuTxPktsAt48Mb, ccMuTxPktsAt54Mb, ccMuRxOctetsAt1Mb, ccMuRxOctetsAt2Mb, ccMuRxOctetsAt5pt5Mb,
ccMuRxOctetsAt6Mb, ccMuRxOctetsAt9Mb, ccMuRxOctetsAt11Mb, ccMuRxOctetsAt12Mb, ccMuRxOctetsAt18Mb,
ccMuRxOctetsAt22Mb, ccMuRxOctetsAt24Mb, ccMuRxOctetsAt36Mb, ccMuRxOctetsAt48Mb, ccMuRxOctetsAt54Mb,
ccMuTxOctetsAt1Mb, ccMuTxOctetsAt2Mb, ccMuTxOctetsAt5pt5Mb, ccMuTxOctetsAt6Mb, ccMuTxOctetsAt9Mb,
ccMuTxOctetsAt11Mb, ccMuTxOctetsAt12Mb, ccMuTxOctetsAt18Mb, ccMuTxOctetsAt22Mb, ccMuTxOctetsAt24Mb,
ccMuTxOctetsAt36Mb, ccMuTxOctetsAt48Mb, ccMuTxOctetsAt54Mb, ccMuTxRetriesNone, ccMuTxRetries01,
ccMuTxRetries02, ccMuTxRetries03, ccMuTxRetries04, ccMuTxRetries05, ccMuTxRetries06,
ccMuTxRetries07, ccMuTxRetries08, ccMuTxRetries09, ccMuTxRetries10, ccMuTxRetries11,
ccMuTxRetries12, ccMuTxRetries13, ccMuTxRetries14, ccMuTxRetries15, ccMuTxRetriesFailed,
ccMuTxRetriesTotal, ccMuTxRetriesMostRecent, ccMuLastMac, ccMuLastReason, ccMuLastPortal,
ccMuTxRetriesOctetsNone, ccMuTxRetriesOctets01, ccMuTxRetriesOctets02, ccMuTxRetriesOctets03, ccMuTxRetriesOctets04,
ccMuTxRetriesOctets05, ccMuTxRetriesOctets06, ccMuTxRetriesOctets07, ccMuTxRetriesOctets08, ccMuTxRetriesOctets09,
ccMuTxRetriesOctets10, ccMuTxRetriesOctets11, ccMuTxRetriesOctets12, ccMuTxRetriesOctets13, ccMuTxRetriesOctets14,
ccMuTxRetriesOctets15, ccMuTxRetriesOctetsFailed, ccMuSigStatsNumPkts, ccMuSigStatsSignalBest, ccMuSigStatsSignalWorst,
ccMuSigStatsSignalSum, ccMuSigStatsSignalSumSquares, ccMuSigStatsSignalMostRecent, ccMuSigStatsNoiseBest, ccMuSigStatsNoiseWorst,
ccMuSigStatsNoiseSum, ccMuSigStatsNoiseSumSquares, ccMuSigStatsNoiseMostRecent, ccMuSigStatsSnrBest, ccMuSigStatsSnrWorst,
ccMuSigStatsSnrSum, ccMuSigStatsSnrSumSquares, ccMuSigStatsSnrMostRecent, ccMuSumStatsShortTimestamp, ccMuSumStatsShortNumPkts,
ccMuSumStatsShortPktsPerSec100, ccMuSumStatsShortPktsPerSecTx100, ccMuSumStatsShortPktsPerSecRx100, ccMuSumStatsShortThroughput, ccMuSumStatsShortThroughputTx,
ccMuSumStatsShortThroughputRx, ccMuSumStatsShortAvgBitSpeed, ccMuSumStatsShortAvgMuSignal, ccMuSumStatsShortAvgMuNoise, ccMuSumStatsShortAvgMuSnr,
ccMuSumStatsShortPp10kNUcastPkts, ccMuSumStatsShortPp10kTxWithRetries, ccMuSumStatsShortTxAvgRetries100, ccMuSumStatsShortPp10kRxUndecrypt, ccMuSumStatsLongTimestamp,
ccMuSumStatsLongNumPkts, ccMuSumStatsLongPktsPerSec100, ccMuSumStatsLongPktsPerSecTx100, ccMuSumStatsLongPktsPerSecRx100, ccMuSumStatsLongThroughput,
ccMuSumStatsLongThroughputTx, ccMuSumStatsLongThroughputRx, ccMuSumStatsLongAvgBitSpeed, ccMuSumStatsLongAvgMuSignal, ccMuSumStatsLongAvgMuNoise,
ccMuSumStatsLongAvgMuSnr, ccMuSumStatsLongPp10kNUcastPkts, ccMuSumStatsLongPp10kTxWithRetries, ccMuSumStatsLongTxAvgRetries100, ccMuSumStatsLongPp10kRxUndecrypt,
ccWlanIndex, ccWlanName, ccWlanEssid, ccWlanSubnet, ccWlanPortalsAdopted,
ccWlanEnable, ccWlanDisallowMuToMu, ccWlanVoicePrioritization, ccWlanAnswerBroadcastEss, ccWlanMulticastAddr1,
ccWlanMulticastAddr2, ccWlanMuAclDefault, ccWlanAuthentication, ccWlanEncryption, ccWlanAuthEapReauthenticationEnable,
ccWlanAuthEapReauthenticationPeriod, ccWlanAuthEapReauthenticationMaxRetries, ccWlanAuthEapRadius1Server, ccWlanAuthEapRadius1Port, ccWlanAuthEapRadius1SharedSecret,
ccWlanAuthEapRadius2Server, ccWlanAuthEapRadius2Port, ccWlanAuthEapRadius2SharedSecret, ccWlanAuthEapMuQuietPeriod, ccWlanAuthEapMuTimeout,
ccWlanAuthEapMuTxPeriod, ccWlanAuthEapMuMaxRetries, ccWlanAuthEapServerTimeout, ccWlanAuthEapServerMaxRetries, ccWlanAuthKerberosRealmName,
ccWlanAuthKerberosUsername, ccWlanAuthKerberosPassword, ccWlanAuthKerberosKdcServerIp1, ccWlanAuthKerberosKdcPort1, ccWlanAuthKerberosKdcServerIp2,
ccWlanAuthKerberosKdcPort2, ccWlanAuthKerberosKdcServerIpR, ccWlanAuthKerberosKdcPortR, ccWlanCryptoWepPassKey, ccWlanCryptoWepKey1,
ccWlanCryptoWepKey2, ccWlanCryptoWepKey3, ccWlanCryptoWepKey4, ccWlanCryptoWepKeyToUse, ccWlanCryptoWpaBcastKeyRotation,
ccWlanCryptoWpaKeyRotationInterval, ccWlanCryptoWpaKeyToUse, ccWlanCryptoWpaPassphrase, ccWlanCryptoWpaKey, ccWlanCryptoKeyguardPasskey,
ccWlanCryptoKeyguardKey1, ccWlanCryptoKeyguardKey2, ccWlanCryptoKeyguardKey3, ccWlanCryptoKeyguardKey4, ccWlanCryptoKeyguardKeyToUse,
ccWlanTxPktsUcast, ccWlanRxPktsUcast, ccWlanRxPktsNUcast, ccWlanTxOctetsUcast, ccWlanRxOctetsUcast,
ccWlanRxOctetsNUcast, ccWlanRxUndecryptablePkts, ccWlanLastActivity, ccWlanRxPktsAt1Mb, ccWlanRxPktsAt2Mb,
ccWlanRxPktsAt5pt5Mb, ccWlanRxPktsAt6Mb, ccWlanRxPktsAt9Mb, ccWlanRxPktsAt11Mb, ccWlanRxPktsAt12Mb,
ccWlanRxPktsAt18Mb, ccWlanRxPktsAt22Mb, ccWlanRxPktsAt24Mb, ccWlanRxPktsAt36Mb, ccWlanRxPktsAt48Mb,
ccWlanRxPktsAt54Mb, ccWlanTxPktsAt1Mb, ccWlanTxPktsAt2Mb, ccWlanTxPktsAt5pt5Mb, ccWlanTxPktsAt6Mb,
ccWlanTxPktsAt9Mb, ccWlanTxPktsAt11Mb, ccWlanTxPktsAt12Mb, ccWlanTxPktsAt18Mb, ccWlanTxPktsAt22Mb,
ccWlanTxPktsAt24Mb, ccWlanTxPktsAt36Mb, ccWlanTxPktsAt48Mb, ccWlanTxPktsAt54Mb, ccWlanRxOctetsAt1Mb,
ccWlanRxOctetsAt2Mb, ccWlanRxOctetsAt5pt5Mb, ccWlanRxOctetsAt6Mb, ccWlanRxOctetsAt9Mb, ccWlanRxOctetsAt11Mb,
ccWlanRxOctetsAt12Mb, ccWlanRxOctetsAt18Mb, ccWlanRxOctetsAt22Mb, ccWlanRxOctetsAt24Mb, ccWlanRxOctetsAt36Mb,
ccWlanRxOctetsAt48Mb, ccWlanRxOctetsAt54Mb, ccWlanTxOctetsAt1Mb, ccWlanTxOctetsAt2Mb, ccWlanTxOctetsAt5pt5Mb,
ccWlanTxOctetsAt6Mb, ccWlanTxOctetsAt9Mb, ccWlanTxOctetsAt11Mb, ccWlanTxOctetsAt12Mb, ccWlanTxOctetsAt18Mb,
ccWlanTxOctetsAt22Mb, ccWlanTxOctetsAt24Mb, ccWlanTxOctetsAt36Mb, ccWlanTxOctetsAt48Mb, ccWlanTxOctetsAt54Mb,
ccWlanTxRetriesPktsNone, ccWlanTxRetriesPkts01, ccWlanTxRetriesPkts02, ccWlanTxRetriesPkts03, ccWlanTxRetriesPkts04,
ccWlanTxRetriesPkts05, ccWlanTxRetriesPkts06, ccWlanTxRetriesPkts07, ccWlanTxRetriesPkts08, ccWlanTxRetriesPkts09,
ccWlanTxRetriesPkts10, ccWlanTxRetriesPkts11, ccWlanTxRetriesPkts12, ccWlanTxRetriesPkts13, ccWlanTxRetriesPkts14,
ccWlanTxRetriesPkts15, ccWlanTxRetriesPktsFailed, ccWlanTxRetriesOctetsNone, ccWlanTxRetriesOctets01, ccWlanTxRetriesOctets02,
ccWlanTxRetriesOctets03, ccWlanTxRetriesOctets04, ccWlanTxRetriesOctets05, ccWlanTxRetriesOctets06, ccWlanTxRetriesOctets07,
ccWlanTxRetriesOctets08, ccWlanTxRetriesOctets09, ccWlanTxRetriesOctets10, ccWlanTxRetriesOctets11, ccWlanTxRetriesOctets12,
ccWlanTxRetriesOctets13, ccWlanTxRetriesOctets14, ccWlanTxRetriesOctets15, ccWlanTxRetriesOctetsFailed, ccWlanSigStatsNumPkts,
ccWlanSigStatsSignalBest, ccWlanSigStatsSignalWorst, ccWlanSigStatsSignalSum, ccWlanSigStatsSignalSumSquares, ccWlanSigStatsNoiseBest,
ccWlanSigStatsNoiseWorst, ccWlanSigStatsNoiseSum, ccWlanSigStatsNoiseSumSquares, ccWlanSigStatsSnrBest, ccWlanSigStatsSnrWorst,
ccWlanSigStatsSnrSum, ccWlanSigStatsSnrSumSquares, ccWlanSumStatsShortTimestamp, ccWlanSumStatsShortNumPkts, ccWlanSumStatsShortPktsPerSec100,
ccWlanSumStatsShortPktsPerSecTx100, ccWlanSumStatsShortPktsPerSecRx100, ccWlanSumStatsShortThroughput, ccWlanSumStatsShortThroughputTx, ccWlanSumStatsShortThroughputRx,
ccWlanSumStatsShortAvgBitSpeed, ccWlanSumStatsShortAvgMuSignal, ccWlanSumStatsShortAvgMuNoise, ccWlanSumStatsShortAvgMuSnr, ccWlanSumStatsShortPp10kNUcastPkts,
ccWlanSumStatsShortPp10kTxWithRetries, ccWlanSumStatsShortTxAvgRetries100, ccWlanSumStatsShortPp10kRxUndecrypt, ccWlanSumStatsShortTotalMus, ccWlanSumStatsLongTimestamp,
ccWlanSumStatsLongNumPkts, ccWlanSumStatsLongPktsPerSec100, ccWlanSumStatsLongPktsPerSecTx100, ccWlanSumStatsLongPktsPerSecRx100, ccWlanSumStatsLongThroughput,
ccWlanSumStatsLongThroughputTx, ccWlanSumStatsLongThroughputRx, ccWlanSumStatsLongAvgBitSpeed, ccWlanSumStatsLongAvgMuSignal, ccWlanSumStatsLongAvgMuNoise,
ccWlanSumStatsLongAvgMuSnr, ccWlanSumStatsLongPp10kNUcastPkts, ccWlanSumStatsLongPp10kTxWithRetries, ccWlanSumStatsLongTxAvgRetries100, ccWlanSumStatsLongPp10kRxUndecrypt,
ccWlanSumStatsLongTotalMus, ccWanIndex, ccWanDhcpEnable, ccWanDhcpIpAddr, ccWanDhcpSubnetMask,
ccWanDhcpDefaultGateway, ccWanDhcpPrimaryDnsServer, ccWanDhcpSecondaryDnsServer, ccWanSubnetMask, ccWanDefaultGateway,
ccWanPrimaryDnsServer, ccWanSecondaryDnsServer, ccWanPppoeEnable, ccWanPppoeUsername, ccWanPppoePassword,
ccWanPppoeKeepAlive, ccWanPppoeIdleTime, ccWanPppoeAuthType, ccWanIpAddrIndex, ccWanIpAddrEnable,
ccWanIpAddr, ccWanFirewallGlobalEnable, ccWanFirewallIndex, ccWanFirewallDescription, ccWanFirewallAlwaysEnabled,
ccWanFirewallEnable, ccWanFirewallMimeFloodMaxHeaderLength, ccWanFirewallMimeFloodMaxHeaders, ccPortIndex, ccPortType,
ccPortPoeEquipped, ccPortStatus, ccPortDuplex, ccPortalBackgroundNoiseNumSamples, ccPortalBackgroundNoiseBest,
ccPortalBackgroundNoiseWorst, ccPortalBackgroundNoiseSum, ccPortalBackgroundNoiseSumSquares, ccMuSumStatsLongPp10kDropped, ccMuSumStatsShortPp10kDropped,
ccPortalSystemStatsProbeRespRetries3OrMore, ccPortalSumStatsShortPp10kTxMaxRetries, ccPortSpeed, ccResetStatCounters, ccDnsRelayMode, ccSslv2Mode, ccSshv1Mode, ccWeakCipherSupport }
STATUS current
DESCRIPTION
"variables implemented in v1.5"
::= { ccGroupsV1dot5 1 }
-- 1.3.6.1.4.1.388.11.2.1000.2.2
ccGroupsV1dot5obsoleted OBJECT-GROUP
OBJECTS { ccLoadFtpPassword, ccMuRxPktsNUcast, ccMuRxOctetsNUcast, ccResetMuCounters }
STATUS obsolete
DESCRIPTION
"variables obsoleted in v1.5"
::= { ccGroupsV1dot5 2 }
-- 1.3.6.1.4.1.388.11.2.1000.2.3
ccGroupsV1dot5notifications NOTIFICATION-GROUP
NOTIFICATIONS { ccPortStatusChange, ccCfAlmostFull, ccFirewallUnderAttack, ccSumStatsMu, ccSumStatsPortal,
ccSumStatsWlan, ccSumStatsSwitch, ccRadarDetected, ccPortalAdopted, ccPortalUnAdopted,
ccPortalDenied, ccMuAssociated, ccMuUnAssociated, ccMuDenied, ccConfigChange,
ccSnmpAclViolation }
STATUS current
DESCRIPTION
"notifications implemented in v1.5"
::= { ccGroupsV1dot5 3 }
-- 1.3.6.1.4.1.388.11.2.1000.3
ccGroupsV2dot0 OBJECT IDENTIFIER ::= { ccGroups 3 }
-- 1.3.6.1.4.1.388.11.2.1000.3.1
ccGroupsV2dot0variables OBJECT-GROUP
OBJECTS { ccInfoSerialNumber, ccInfoCountrySelection, ccIdHwVersion, ccIdFwVersion, ccIdSwVersion,
ccIdMibVersion, ccIdCliVersion, ccIdXmlVersion, ccIdSerialNumber, ccResetFactory,
ccResetSwitch, ccResetFactoryExceptIpSnmp, ccResetStatCounters, ccLoadFwOperation, ccLoadFwInterface,
ccLoadFwServerPath, ccLoadFwServerFilename, ccLoadFwStart, ccLoadFwResult, ccLoadFwSuccess,
ccLoadCfgOperation, ccLoadCfgServerPath, ccLoadCfgServerFilename, ccLoadCfgStart, ccLoadCfgOperationsDone,
ccLoadCfgResult, ccLoadCfgSuccess, ccCfgHistChangeCount, ccCfgHistChangeTime, ccCfgHistSemaphore,
ccLoadServerIpAddr, ccLoadFtpUsername, ccLoadFtpPassword, ccSnmpAclViolations, ccSnmpLastDeniedIpAddr,
ccSnmpAccessV12Index, ccSnmpAccessV12Community, ccSnmpAccessV12CustomOid, ccSnmpAccessV12OidLimit, ccSnmpAccessV12Access,
ccSnmpAccessV12Enable, ccSnmpAccessV3Index, ccSnmpAccessV3SecurityLevel, ccSnmpAccessV3CustomOid, ccSnmpAccessV3OidLimit,
ccSnmpAccessV3Access, ccSnmpAccessV3AuthAlgorithm, ccSnmpAccessV3AuthPassword, ccSnmpAccessV3PrivacyAlgorithm, ccSnmpAccessV3PrivacyPassword,
ccSnmpAccessV3Enable, ccSnmpAccessControlIndex, ccSnmpAccessControlStartIp, ccSnmpAccessControlEndIp, ccSnmpAccessControlEnable,
ccSnmpTrapSinkV12Index, ccSnmpTrapSinkV12DestinationIp, ccSnmpTrapSinkV12Port, ccSnmpTrapSinkV12Community, ccSnmpTrapSinkV12Version,
ccSnmpTrapSinkV12Enable, ccSnmpTrapSinkV3Index, ccSnmpTrapSinkV3DestinationIp, ccSnmpTrapSinkV3Port, ccSnmpTrapSinkV3Username,
ccSnmpTrapSinkV3SecurityLevel, ccSnmpTrapSinkV3AuthAlgorithm, ccSnmpTrapSinkV3AuthPassword, ccSnmpTrapSinkV3PrivacyAlgorithm, ccSnmpTrapSinkV3PrivacyPassword,
ccSnmpTrapSinkV3Enable, ccCompactFlashCapacity, ccCompactFlashUsed, ccSumStatsShortWindow, ccSumStatsShortUpdateInterval,
ccSumStatsLongWindow, ccSumStatsLongUpdateInterval, ccMgmtAccessToAllow, ccMgmtAccessAirbeamAllow, ccMgmtAccessAirbeamPassword,
ccMgmtAccessAdminAuth, ccMgmtAccessAdminPassword, ccMgmtAccessAdminAuthRadiusServerIp, ccMgmtAccessAdminAuthRadiusServerPort, ccMgmtAccessAdminAuthRadiusSharedSecret,
ccMgmtAccessSshAuthTimeout, ccMgmtAccessSshInactivityTimeout, ccLoggingLevel, ccLoggingToSyslog, ccLoggingSyslogServer,
ccNtpEnable, ccNtp0Server, ccNtp0Port, ccNtp1Server, ccNtp1Port,
ccNtp2Server, ccNtp2Port, ccNtpGmtHourOffset, ccNtpGmtMinuteOffset, ccDhcpOptionsUpdateFwEna,
ccDhcpOptionsUpdateCfgEna, ccDhcpOptionsUpdateInterface, ccDhcpOptionsUpdateFwFilename, ccDhcpOptionsUpdateCfgFilename, ccRedundancyAdminState,
ccRedundancyOperState, ccRedundancyHeartbeatInterval, ccRedundancyRevertDelay, ccTrapCtrlCfAlmostFullThreshold, ccTrapCtrlFirewallUnderAttackDescription,
ccTrapCtrlFirewallUnderAttackRateLimit, ccTrapCtrlRadarDetectedPortalMac, ccTrapCtrlRadarDetectedChannel, ccTrapCtrlSumStatsIndex, ccTrapCtrlSumStatsDescr,
ccTrapCtrlSumStatsUnits, ccTrapCtrlSumStatsCanBeSetMu, ccTrapCtrlSumStatsThresholdMu, ccTrapCtrlSumStatsCanBeSetPortal, ccTrapCtrlSumStatsThresholdPortals,
ccTrapCtrlSumStatsCanBeSetWlan, ccTrapCtrlSumStatsThresholdWlans, ccTrapCtrlSumStatsCanBeSetSwitch, ccTrapCtrlSumStatsThresholdSwitch, ccTrapCtrlSumStatsMinPktsForTrap,
ccTrapCtrlLanVlanActivatedVlanId, ccTrapCtrlDhcpOptionsFileTransferStatusRequested, ccApIndex, ccApNicMac, ccApModelNumber,
ccApSerialNumber, ccApPcbRevision, ccApBootLoaderRev, ccApWispVersion, ccApRuntimeFwVersion,
ccApNumPortals, ccApPointersToPortals, ccPortalIndex, ccPortalPointerToAp, ccPortalPointersToWlans,
ccPortalName, ccPortalLocation, ccPortalOptions, ccPortalMac, ccPortalNumberOfEss,
ccPortalNumberOfBss, ccPortalAssociatedMus, ccPortalRadioType, ccPortalChannel, ccPortalTxPowerLevel,
ccPortalLastAdoption, ccPortalState, ccPortalBackgroundNoiseNumSamples, ccPortalBackgroundNoiseBest, ccPortalBackgroundNoiseWorst,
ccPortalBackgroundNoiseSum, ccPortalBackgroundNoiseSumSquares, ccPortalLastMac, ccPortalLastReason, ccPortalAdoptionIndex,
ccPortalAdoptionStartMac, ccPortalAdoptionEndMac, ccPortalAdoptionWlanPointers, ccPortalAdoptionRowStatus, ccPortalSystemStatsBeaconsTx,
ccPortalSystemStatsBeaconsTxOctets, ccPortalSystemStatsProbeReqRx, ccPortalSystemStatsProbeReqRxOctets, ccPortalSystemStatsProbeRespRetriesNone, ccPortalSystemStatsProbeRespRetries1,
ccPortalSystemStatsProbeRespRetries2, ccPortalSystemStatsProbeRespRetriesFailed, ccPortalSystemStatsProbeRespTxOctets, ccPortalTxPktsUcast, ccPortalRxPktsUcast,
ccPortalRxPktsNUcast, ccPortalTxOctetsUcast, ccPortalRxOctetsUcast, ccPortalRxOctetsNUcast, ccPortalRxUndecryptablePkts,
ccPortalLastActivity, ccPortalRxPktsAt1Mb, ccPortalRxPktsAt2Mb, ccPortalRxPktsAt5pt5Mb, ccPortalRxPktsAt6Mb,
ccPortalRxPktsAt9Mb, ccPortalRxPktsAt11Mb, ccPortalRxPktsAt12Mb, ccPortalRxPktsAt18Mb, ccPortalRxPktsAt22Mb,
ccPortalRxPktsAt24Mb, ccPortalRxPktsAt36Mb, ccPortalRxPktsAt48Mb, ccPortalRxPktsAt54Mb, ccPortalTxPktsAt1Mb,
ccPortalTxPktsAt2Mb, ccPortalTxPktsAt5pt5Mb, ccPortalTxPktsAt6Mb, ccPortalTxPktsAt9Mb, ccPortalTxPktsAt11Mb,
ccPortalTxPktsAt12Mb, ccPortalTxPktsAt18Mb, ccPortalTxPktsAt22Mb, ccPortalTxPktsAt24Mb, ccPortalTxPktsAt36Mb,
ccPortalTxPktsAt48Mb, ccPortalTxPktsAt54Mb, ccPortalRxOctetsAt1Mb, ccPortalRxOctetsAt2Mb, ccPortalRxOctetsAt5pt5Mb,
ccPortalRxOctetsAt6Mb, ccPortalRxOctetsAt9Mb, ccPortalRxOctetsAt11Mb, ccPortalRxOctetsAt12Mb, ccPortalRxOctetsAt18Mb,
ccPortalRxOctetsAt22Mb, ccPortalRxOctetsAt24Mb, ccPortalRxOctetsAt36Mb, ccPortalRxOctetsAt48Mb, ccPortalRxOctetsAt54Mb,
ccPortalTxOctetsAt1Mb, ccPortalTxOctetsAt2Mb, ccPortalTxOctetsAt5pt5Mb, ccPortalTxOctetsAt6Mb, ccPortalTxOctetsAt9Mb,
ccPortalTxOctetsAt11Mb, ccPortalTxOctetsAt12Mb, ccPortalTxOctetsAt18Mb, ccPortalTxOctetsAt22Mb, ccPortalTxOctetsAt24Mb,
ccPortalTxOctetsAt36Mb, ccPortalTxOctetsAt48Mb, ccPortalTxOctetsAt54Mb, ccPortalTxRetriesPktsNone, ccPortalTxRetriesPkts01,
ccPortalTxRetriesPkts02, ccPortalTxRetriesPkts03, ccPortalTxRetriesPkts04, ccPortalTxRetriesPkts05, ccPortalTxRetriesPkts06,
ccPortalTxRetriesPkts07, ccPortalTxRetriesPkts08, ccPortalTxRetriesPkts09, ccPortalTxRetriesPkts10, ccPortalTxRetriesPkts11,
ccPortalTxRetriesPkts12, ccPortalTxRetriesPkts13, ccPortalTxRetriesPkts14, ccPortalTxRetriesPkts15, ccPortalTxRetriesPktsFailed,
ccPortalTxRetriesOctetsNone, ccPortalTxRetriesOctets01, ccPortalTxRetriesOctets02, ccPortalTxRetriesOctets03, ccPortalTxRetriesOctets04,
ccPortalTxRetriesOctets05, ccPortalTxRetriesOctets06, ccPortalTxRetriesOctets07, ccPortalTxRetriesOctets08, ccPortalTxRetriesOctets09,
ccPortalTxRetriesOctets10, ccPortalTxRetriesOctets11, ccPortalTxRetriesOctets12, ccPortalTxRetriesOctets13, ccPortalTxRetriesOctets14,
ccPortalTxRetriesOctets15, ccPortalTxRetriesOctetsFailed, ccPortalSigStatsNumPkts, ccPortalSigStatsSignalBest, ccPortalSigStatsSignalWorst,
ccPortalSigStatsSignalSum, ccPortalSigStatsSignalSumSquares, ccPortalSigStatsSignalMostRecent, ccPortalSigStatsNoiseBest, ccPortalSigStatsNoiseWorst,
ccPortalSigStatsNoiseSum, ccPortalSigStatsNoiseSumSquares, ccPortalSigStatsNoiseMostRecent, ccPortalSigStatsSnrBest, ccPortalSigStatsSnrWorst,
ccPortalSigStatsSnrSum, ccPortalSigStatsSnrSumSquares, ccPortalSigStatsSnrMostRecent, ccPortalSumStatsShortTimestamp, ccPortalSumStatsShortNumPkts,
ccPortalSumStatsShortPktsPerSec100, ccPortalSumStatsShortPktsPerSecTx100, ccPortalSumStatsShortPktsPerSecRx100, ccPortalSumStatsShortThroughput, ccPortalSumStatsShortThroughputTx,
ccPortalSumStatsShortThroughputRx, ccPortalSumStatsShortAvgBitSpeed, ccPortalSumStatsShortAvgMuSignal, ccPortalSumStatsShortAvgMuNoise, ccPortalSumStatsShortAvgMuSnr,
ccPortalSumStatsShortPp10kNUcastPkts, ccPortalSumStatsShortPp10kTxWithRetries, ccPortalSumStatsShortTxAvgRetries100, ccPortalSumStatsShortPp10kRxUndecrypt, ccPortalSumStatsShortTotalMus,
ccPortalSumStatsShortPp10kRfUtil, ccPortalSumStatsLongTimestamp, ccPortalSumStatsLongNumPkts, ccPortalSumStatsLongPktsPerSec100, ccPortalSumStatsLongPktsPerSecTx100,
ccPortalSumStatsLongPktsPerSecRx100, ccPortalSumStatsLongThroughput, ccPortalSumStatsLongThroughputTx, ccPortalSumStatsLongThroughputRx, ccPortalSumStatsLongAvgBitSpeed,
ccPortalSumStatsLongAvgMuSignal, ccPortalSumStatsLongAvgMuNoise, ccPortalSumStatsLongAvgMuSnr, ccPortalSumStatsLongPp10kNUcastPkts, ccPortalSumStatsLongPp10kTxWithRetries,
ccPortalSumStatsLongTxAvgRetries100, ccPortalSumStatsLongPp10kRxUndecrypt, ccPortalSumStatsLongTotalMus, ccPortalSumStatsLongPp10kRfUtil, ccAssociationFirstAssociate,
ccAssociationLastAssociate, ccAssociationCountAssociates, ccMuMac, ccMuWlanIndex, ccMuWlanName,
ccMuIsDataReady, ccMuPortalIndex, ccMuPortalMac, ccMuSymbolRogueApEna, ccMuIpAddr,
ccMuType, ccMuRadioType, ccMuSupportedRates, ccMuPowerMode, ccMuAuthenticationMethod,
ccMuEncryptionMethod, ccMuVlanId, ccMuTxPktsUcast, ccMuRxPktsUcast, ccMuTxOctetsUcast,
ccMuRxOctetsUcast, ccMuRxUndecryptablePkts, ccMuRxRssiNumPkts, ccMuRxRssiSum, ccMuRxRssiSumSquares,
ccMuRxRssiMostRecent, ccMuLastActivity, ccMuRxPktsAt1Mb, ccMuRxPktsAt2Mb, ccMuRxPktsAt5pt5Mb,
ccMuRxPktsAt6Mb, ccMuRxPktsAt9Mb, ccMuRxPktsAt11Mb, ccMuRxPktsAt12Mb, ccMuRxPktsAt18Mb,
ccMuRxPktsAt22Mb, ccMuRxPktsAt24Mb, ccMuRxPktsAt36Mb, ccMuRxPktsAt48Mb, ccMuRxPktsAt54Mb,
ccMuTxPktsAt1Mb, ccMuTxPktsAt2Mb, ccMuTxPktsAt5pt5Mb, ccMuTxPktsAt6Mb, ccMuTxPktsAt9Mb,
ccMuTxPktsAt11Mb, ccMuTxPktsAt12Mb, ccMuTxPktsAt18Mb, ccMuTxPktsAt22Mb, ccMuTxPktsAt24Mb,
ccMuTxPktsAt36Mb, ccMuTxPktsAt48Mb, ccMuTxPktsAt54Mb, ccMuRxOctetsAt1Mb, ccMuRxOctetsAt2Mb,
ccMuRxOctetsAt5pt5Mb, ccMuRxOctetsAt6Mb, ccMuRxOctetsAt9Mb, ccMuRxOctetsAt11Mb, ccMuRxOctetsAt12Mb,
ccMuRxOctetsAt18Mb, ccMuRxOctetsAt22Mb, ccMuRxOctetsAt24Mb, ccMuRxOctetsAt36Mb, ccMuRxOctetsAt48Mb,
ccMuRxOctetsAt54Mb, ccMuTxOctetsAt1Mb, ccMuTxOctetsAt2Mb, ccMuTxOctetsAt5pt5Mb, ccMuTxOctetsAt6Mb,
ccMuTxOctetsAt9Mb, ccMuTxOctetsAt11Mb, ccMuTxOctetsAt12Mb, ccMuTxOctetsAt18Mb, ccMuTxOctetsAt22Mb,
ccMuTxOctetsAt24Mb, ccMuTxOctetsAt36Mb, ccMuTxOctetsAt48Mb, ccMuTxOctetsAt54Mb, ccMuTxRetriesNone,
ccMuTxRetries01, ccMuTxRetries02, ccMuTxRetries03, ccMuTxRetries04, ccMuTxRetries05,
ccMuTxRetries06, ccMuTxRetries07, ccMuTxRetries08, ccMuTxRetries09, ccMuTxRetries10,
ccMuTxRetries11, ccMuTxRetries12, ccMuTxRetries13, ccMuTxRetries14, ccMuTxRetries15,
ccMuTxRetriesFailed, ccMuTxRetriesTotal, ccMuTxRetriesMostRecent, ccMuLastMac, ccMuLastReason,
ccMuLastPortal, ccMuTxRetriesOctetsNone, ccMuTxRetriesOctets01, ccMuTxRetriesOctets02, ccMuTxRetriesOctets03,
ccMuTxRetriesOctets04, ccMuTxRetriesOctets05, ccMuTxRetriesOctets06, ccMuTxRetriesOctets07, ccMuTxRetriesOctets08,
ccMuTxRetriesOctets09, ccMuTxRetriesOctets10, ccMuTxRetriesOctets11, ccMuTxRetriesOctets12, ccMuTxRetriesOctets13,
ccMuTxRetriesOctets14, ccMuTxRetriesOctets15, ccMuTxRetriesOctetsFailed, ccMuSigStatsNumPkts, ccMuSigStatsSignalBest,
ccMuSigStatsSignalWorst, ccMuSigStatsSignalSum, ccMuSigStatsSignalSumSquares, ccMuSigStatsSignalMostRecent, ccMuSigStatsNoiseBest,
ccMuSigStatsNoiseWorst, ccMuSigStatsNoiseSum, ccMuSigStatsNoiseSumSquares, ccMuSigStatsNoiseMostRecent, ccMuSigStatsSnrBest,
ccMuSigStatsSnrWorst, ccMuSigStatsSnrSum, ccMuSigStatsSnrSumSquares, ccMuSigStatsSnrMostRecent, ccMuSumStatsShortTimestamp,
ccMuSumStatsShortNumPkts, ccMuSumStatsShortPktsPerSec100, ccMuSumStatsShortPktsPerSecTx100, ccMuSumStatsShortPktsPerSecRx100, ccMuSumStatsShortThroughput,
ccMuSumStatsShortThroughputTx, ccMuSumStatsShortThroughputRx, ccMuSumStatsShortAvgBitSpeed, ccMuSumStatsShortAvgMuSignal, ccMuSumStatsShortAvgMuNoise,
ccMuSumStatsShortAvgMuSnr, ccMuSumStatsShortPp10kNUcastPkts, ccMuSumStatsShortPp10kTxWithRetries, ccMuSumStatsShortTxAvgRetries100, ccMuSumStatsShortPp10kRxUndecrypt,
ccMuSumStatsLongTimestamp, ccMuSumStatsLongNumPkts, ccMuSumStatsLongPktsPerSec100, ccMuSumStatsLongPktsPerSecTx100, ccMuSumStatsLongPktsPerSecRx100,
ccMuSumStatsLongThroughput, ccMuSumStatsLongThroughputTx, ccMuSumStatsLongThroughputRx, ccMuSumStatsLongAvgBitSpeed, ccMuSumStatsLongAvgMuSignal,
ccMuSumStatsLongAvgMuNoise, ccMuSumStatsLongAvgMuSnr, ccMuSumStatsLongPp10kNUcastPkts, ccMuSumStatsLongPp10kTxWithRetries, ccMuSumStatsLongTxAvgRetries100,
ccMuSumStatsLongPp10kRxUndecrypt, ccWlanIndex, ccWlanName, ccWlanEssid, ccWlanSubnet,
ccWlanPortalsAdopted, ccWlanEnable, ccWlanDisallowMuToMu, ccWlanVoicePrioritization, ccWlanAnswerBroadcastEss,
ccWlanMulticastAddr1, ccWlanMulticastAddr2, ccWlanMuAclDefault, ccWlanAuthentication, ccWlanEncryption,
ccWlanWeight, ccWlanAuthEapReauthenticationEnable, ccWlanAuthEapReauthenticationPeriod, ccWlanAuthEapReauthenticationMaxRetries, ccWlanAuthEapRadius1Server,
ccWlanAuthEapRadius1Port, ccWlanAuthEapRadius1SharedSecret, ccWlanAuthEapRadius2Server, ccWlanAuthEapRadius2Port, ccWlanAuthEapRadius2SharedSecret,
ccWlanAuthEapMuQuietPeriod, ccWlanAuthEapMuTimeout, ccWlanAuthEapMuTxPeriod, ccWlanAuthEapMuMaxRetries, ccWlanAuthEapServerTimeout,
ccWlanAuthEapServerMaxRetries, ccWlanAuthKerberosRealmName, ccWlanAuthKerberosUsername, ccWlanAuthKerberosPassword, ccWlanAuthKerberosKdcServerIp1,
ccWlanAuthKerberosKdcPort1, ccWlanAuthKerberosKdcServerIp2, ccWlanAuthKerberosKdcPort2, ccWlanAuthKerberosKdcServerIpR, ccWlanAuthKerberosKdcPortR,
ccWlanCryptoWepPassKey, ccWlanCryptoWepKey1, ccWlanCryptoWepKey2, ccWlanCryptoWepKey3, ccWlanCryptoWepKey4,
ccWlanCryptoWepKeyToUse, ccWlanCryptoWpaBcastKeyRotation, ccWlanCryptoWpaKeyRotationInterval, ccWlanCryptoWpaKeyToUse, ccWlanCryptoWpaPassphrase,
ccWlanCryptoWpaKey, ccWlanCryptoKeyguardPasskey, ccWlanCryptoKeyguardKey1, ccWlanCryptoKeyguardKey2, ccWlanCryptoKeyguardKey3,
ccWlanCryptoKeyguardKey4, ccWlanCryptoKeyguardKeyToUse, ccWlanMuAclIndex, ccWlanMuAclStartingMac, ccWlanMuAclEndingMac,
ccWlanMuAclRowStatus, ccWlanBwShareMode, ccWlanTxPktsUcast, ccWlanRxPktsUcast, ccWlanRxPktsNUcast,
ccWlanTxOctetsUcast, ccWlanRxOctetsUcast, ccWlanRxOctetsNUcast, ccWlanRxUndecryptablePkts, ccWlanLastActivity,
ccWlanRxPktsAt1Mb, ccWlanRxPktsAt2Mb, ccWlanRxPktsAt5pt5Mb, ccWlanRxPktsAt6Mb, ccWlanRxPktsAt9Mb,
ccWlanRxPktsAt11Mb, ccWlanRxPktsAt12Mb, ccWlanRxPktsAt18Mb, ccWlanRxPktsAt22Mb, ccWlanRxPktsAt24Mb,
ccWlanRxPktsAt36Mb, ccWlanRxPktsAt48Mb, ccWlanRxPktsAt54Mb, ccWlanTxPktsAt1Mb, ccWlanTxPktsAt2Mb,
ccWlanTxPktsAt5pt5Mb, ccWlanTxPktsAt6Mb, ccWlanTxPktsAt9Mb, ccWlanTxPktsAt11Mb, ccWlanTxPktsAt12Mb,
ccWlanTxPktsAt18Mb, ccWlanTxPktsAt22Mb, ccWlanTxPktsAt24Mb, ccWlanTxPktsAt36Mb, ccWlanTxPktsAt48Mb,
ccWlanTxPktsAt54Mb, ccWlanRxOctetsAt1Mb, ccWlanRxOctetsAt2Mb, ccWlanRxOctetsAt5pt5Mb, ccWlanRxOctetsAt6Mb,
ccWlanRxOctetsAt9Mb, ccWlanRxOctetsAt11Mb, ccWlanRxOctetsAt12Mb, ccWlanRxOctetsAt18Mb, ccWlanRxOctetsAt22Mb,
ccWlanRxOctetsAt24Mb, ccWlanRxOctetsAt36Mb, ccWlanRxOctetsAt48Mb, ccWlanRxOctetsAt54Mb, ccWlanTxOctetsAt1Mb,
ccWlanTxOctetsAt2Mb, ccWlanTxOctetsAt5pt5Mb, ccWlanTxOctetsAt6Mb, ccWlanTxOctetsAt9Mb, ccWlanTxOctetsAt11Mb,
ccWlanTxOctetsAt12Mb, ccWlanTxOctetsAt18Mb, ccWlanTxOctetsAt22Mb, ccWlanTxOctetsAt24Mb, ccWlanTxOctetsAt36Mb,
ccWlanTxOctetsAt48Mb, ccWlanTxOctetsAt54Mb, ccWlanTxRetriesPktsNone, ccWlanTxRetriesPkts01, ccWlanTxRetriesPkts02,
ccWlanTxRetriesPkts03, ccWlanTxRetriesPkts04, ccWlanTxRetriesPkts05, ccWlanTxRetriesPkts06, ccWlanTxRetriesPkts07,
ccWlanTxRetriesPkts08, ccWlanTxRetriesPkts09, ccWlanTxRetriesPkts10, ccWlanTxRetriesPkts11, ccWlanTxRetriesPkts12,
ccWlanTxRetriesPkts13, ccWlanTxRetriesPkts14, ccWlanTxRetriesPkts15, ccWlanTxRetriesPktsFailed, ccWlanTxRetriesOctetsNone,
ccWlanTxRetriesOctets01, ccWlanTxRetriesOctets02, ccWlanTxRetriesOctets03, ccWlanTxRetriesOctets04, ccWlanTxRetriesOctets05,
ccWlanTxRetriesOctets06, ccWlanTxRetriesOctets07, ccWlanTxRetriesOctets08, ccWlanTxRetriesOctets09, ccWlanTxRetriesOctets10,
ccWlanTxRetriesOctets11, ccWlanTxRetriesOctets12, ccWlanTxRetriesOctets13, ccWlanTxRetriesOctets14, ccWlanTxRetriesOctets15,
ccWlanTxRetriesOctetsFailed, ccWlanSigStatsNumPkts, ccWlanSigStatsSignalBest, ccWlanSigStatsSignalWorst, ccWlanSigStatsSignalSum,
ccWlanSigStatsSignalSumSquares, ccWlanSigStatsNoiseBest, ccWlanSigStatsNoiseWorst, ccWlanSigStatsNoiseSum, ccWlanSigStatsNoiseSumSquares,
ccWlanSigStatsSnrBest, ccWlanSigStatsSnrWorst, ccWlanSigStatsSnrSum, ccWlanSigStatsSnrSumSquares, ccWlanSumStatsShortTimestamp,
ccWlanSumStatsShortNumPkts, ccWlanSumStatsShortPktsPerSec100, ccWlanSumStatsShortPktsPerSecTx100, ccWlanSumStatsShortPktsPerSecRx100, ccWlanSumStatsShortThroughput,
ccWlanSumStatsShortThroughputTx, ccWlanSumStatsShortThroughputRx, ccWlanSumStatsShortAvgBitSpeed, ccWlanSumStatsShortAvgMuSignal, ccWlanSumStatsShortAvgMuNoise,
ccWlanSumStatsShortAvgMuSnr, ccWlanSumStatsShortPp10kNUcastPkts, ccWlanSumStatsShortPp10kTxWithRetries, ccWlanSumStatsShortTxAvgRetries100, ccWlanSumStatsShortPp10kRxUndecrypt,
ccWlanSumStatsShortTotalMus, ccWlanSumStatsLongTimestamp, ccWlanSumStatsLongNumPkts, ccWlanSumStatsLongPktsPerSec100, ccWlanSumStatsLongPktsPerSecTx100,
ccWlanSumStatsLongPktsPerSecRx100, ccWlanSumStatsLongThroughput, ccWlanSumStatsLongThroughputTx, ccWlanSumStatsLongThroughputRx, ccWlanSumStatsLongAvgBitSpeed,
ccWlanSumStatsLongAvgMuSignal, ccWlanSumStatsLongAvgMuNoise, ccWlanSumStatsLongAvgMuSnr, ccWlanSumStatsLongPp10kNUcastPkts, ccWlanSumStatsLongPp10kTxWithRetries,
ccWlanSumStatsLongTxAvgRetries100, ccWlanSumStatsLongPp10kRxUndecrypt, ccWlanSumStatsLongTotalMus, ccWanIndex, ccWanDhcpEnable,
ccWanDhcpIpAddr, ccWanDhcpSubnetMask, ccWanDhcpDefaultGateway, ccWanDhcpPrimaryDnsServer, ccWanDhcpSecondaryDnsServer,
ccWanSubnetMask, ccWanDefaultGateway, ccWanPrimaryDnsServer, ccWanSecondaryDnsServer, ccWanPppoeEnable,
ccWanPppoeUsername, ccWanPppoePassword, ccWanPppoeKeepAlive, ccWanPppoeIdleTime, ccWanPppoeAuthType,
ccWanIpAddrIndex, ccWanIpAddrEnable, ccWanIpAddr, ccWanFirewallGlobalEnable, ccWanFirewallIndex,
ccWanFirewallDescription, ccWanFirewallAlwaysEnabled, ccWanFirewallEnable, ccWanFirewallMimeFloodMaxHeaderLength, ccWanFirewallMimeFloodMaxHeaders,
ccWanNatIndex, ccWanNatWanIpAddress, ccWanNatType, ccWanNat1to1IpAddr, ccWanNatInboundDefaultEna,
ccWanNatInboundDefaultIp, ccWanNatInboundIndex, ccWanNatInboundName, ccWanNatInboundTransport, ccWanNatInboundStartPort,
ccWanNatInboundEndPort, ccWanNatInboundIpAddr, ccWanNatInboundRowStatus, ccWanNatOutboundSubnetIndex, ccWanNatOutboundPossibleIpAddr,
ccWanNatOutboundIpAddr, ccWanVpnName, ccWanVpnLocalSubnet, ccWanVpnLocalWanIp, ccWanVpnRemoteSubnet,
ccWanVpnRemoteSubnetMask, ccWanVpnRemoteGateway, ccWanVpnKeyExchange, ccWanVpnRowStatus, ccWanVpnKeyManualAhAuth,
ccWanVpnKeyManualInAhAuthKey, ccWanVpnKeyManualOutAhAuthKey, ccWanVpnKeyManualInAhSpi, ccWanVpnKeyManualOutAhSpi, ccWanVpnKeyManualEspType,
ccWanVpnKeyManualEspEncrypAlg, ccWanVpnKeyManualInEspEncrypKey, ccWanVpnKeyManualOutEspEncrypKey, ccWanVpnKeyManualEspAuthAlg, ccWanVpnKeyManualInEspAuthKey,
ccWanVpnKeyManualOutEspAuthKey, ccWanVpnKeyManualInEspSpi, ccWanVpnKeyManualOutEspSpi, ccWanVpnKeyAutoUsePerfectSecrecy, ccWanVpnKeyAutoAhAuth,
ccWanVpnKeyAutoEspType, ccWanVpnKeyAutoEspEncrypAlg, ccWanVpnKeyAutoEspAuthAlg, ccWanVpnKeyAutoIkeOperationMode, ccWanVpnKeyAutoIkeLocalIdType,
ccWanVpnKeyAutoIkeLocalIdData, ccWanVpnKeyAutoIkeRemoteIdType, ccWanVpnKeyAutoIkeRemoteIdData, ccWanVpnKeyAutoIkeAuthAlg, ccWanVpnKeyAutoIkeAuthPassphrase,
ccWanVpnKeyAutoIkeEncrypAlg, ccWanVpnKeyAutoIkeXauthMode, ccWanVpnKeyAutoIkeXauthUsername, ccWanVpnKeyAutoIkeXauthPassword, ccWanVpnKeyAutoIkeKeyLifetime,
ccWanVpnKeyAutoIkeDiffieHelmanGroup, ccWanVpnSaTunnelName, ccWanVpnSaStatus, ccWanVpnSaInSpi, ccWanVpnSaOutSpi,
ccWanVpnSaLifetime, ccWanVpnSaTxBytes, ccWanVpnSaRxBytes, ccWanVpnIkeTunnelName, ccWanVpnIkeState,
ccWanVpnIkeRemainingLife, ccWanContentBlockSmtp, ccWanContentBlockFtp, ccWanContentBlockHttp, ccWanContentBlockOutUrlIndex,
ccWanContentBlockOutUrlExtension, ccWanContentBlockOutUrlRowStatus, ccPortIndex, ccPortType, ccPortPoeEquipped,
ccPortStatus, ccPortDuplex, ccPortSpeed, ccSubnetIndex, ccSubnetEnable,
ccSubnetName, ccSubnetIpAddress, ccSubnetIpSubnetMask, ccSubnetPortMembers, ccSubnetWlanMembers,
ccSubnetDhcpState, ccSubnetDhcpIpAddress, ccSubnetDhcpSubnetMask, ccSubnetDhcpServerEnable, ccSubnetDhcpServerPoolStart,
ccSubnetDhcpServerPoolEnd, ccSubnetDhcpServerPrimaryDns, ccSubnetDhcpServerSecondaryDns, ccSubnetDhcpServerDefaultGateway, ccSubnetDhcpServerLeaseTime,
ccSubnetDhcpServerStaticMapMac, ccSubnetDhcpServerStaticMapIpAddr, ccSubnetDhcpServerStaticMapEnable, ccSubnetAccessDestIndex, ccSubnetAccessRuleIndex,
ccSubnetAccessDestType, ccSubnetAccessDestPtrToDest, ccSubnetAccessRuleName, ccSubnetAccessRuleType, ccSubnetAccessAdvInIndex,
ccLanVlanType, ccLanVlanTrunkPort, ccLanVlanDefaultTag, ccLanVlanTrunked, ccLanVlanId,
ccRouterRipType, ccRouterRipDirection, ccRouterRip2AuthType, ccRouterRip2SimplePassword, ccRouterRip2Md5Key1Id,
ccRouterRip2Md5Key1AuthKey, ccRouterRip2Md5Key2Id, ccRouterRip2Md5Key2AuthKey, ccRouterRoutesIndex, ccRouterRoutesDest,
ccRouterRoutesDestMask, ccRouterRoutesGateway, ccRouterRoutesInterface, ccRouterRoutesMetric, ccRouterUserRoutesIndex,
ccRouterUserRoutesDest, ccRouterUserRoutesDestMask, ccRouterUserRoutesGateway, ccRouterUserRoutesInterface, ccRouterUserRoutesMetric,
ccRouterUserRoutesRowStatus, ccRapPollSymbolMusEnable, ccRapPollSymbolMusInterval, ccRapOnChannelEnable, ccRapOnChannelInterval,
ccRapDetectorsEnable, ccRapDetectorsInterval, ccRapAuthAllSymbolMac, ccRapAuthIndex, ccRapAuthMacFilter,
ccRapAuthEssidFilter, ccRapAuthRowExists, ccRapAuthErase, ccRapAuthCopyAllApproved, ccRapResultsApprovedAgeOut,
ccRapResultsApprovedApMac, ccRapResultsApprovedEssid, ccRapResultsApprovedCopyToAuthTable, ccRapResultsApprovedFirstHeard, ccRapResultsApprovedLastHeard,
ccRapResultsApprovedPortalPtr, ccRapResultsApprovedHowFound, ccRapResultsApprovedHowAuth, ccRapResultsApprovedErase, ccRapResultsRogueAgeOut,
ccRapResultsRogueApMac, ccRapResultsRogueEssid, ccRapResultsRogueCopyToAuthTable, ccRapResultsRogueFirstHeard, ccRapResultsRogueLastHeard,
ccRapResultsRoguePortalPtr, ccRapResultsRogueHowFound, ccRapResultsRogueClosestPortalPtr, ccRapResultsRogueClosestPortalRssi, ccRapResultsRogueErase,
ccRapPortalResultsApMac, ccRapPortalResultsApEssid, ccRapPortalResultsInProcess, ccRapPortalResultsPortalMac, ccRapPortalResultsRssi,
ccRapPollOneMuMac, ccRapPollOneMuInProcess, ccRapPollOneMuStatus, ccRapPollOneMuResultsIndex, ccRapPollOneMuResultsRssi,
ccRapPollOneMuResultsEssid, ccRapPollOneMuResultsApMac, ccRadiusDataSource, ccRadiusDefaultEapType, ccRadiusClientAuthIndex,
ccRadiusClientAuthIpAddr, ccRadiusClientAuthMask, ccRadiusClientAuthSharedSecret, ccRadiusProxyRetryCount, ccRadiusProxyTimeout,
ccRadiusProxyServerIndex, ccRadiusProxyServerIp, ccRadiusProxyServerPort, ccRadiusProxyServerSharedSecret, ccRadiusLdapServerIp,
ccRadiusLdapServerPort, ccRadiusLdapLoginAttribute, ccRadiusLdapPasswordAttribute, ccRadiusLdapBindDistinguishedName, ccRadiusLdapBindDistinguishedPassword,
ccRadiusLdapBaseDistinguishedName, ccRadiusLdapGroupAttribute, ccRadiusLdapGroupFilter, ccRadiusLdapGroupMembershipAttribute, ccRadiusUsersId,
ccRadiusUsersPassword, ccRadiusUsersGroups, ccRadiusUsersRowStatus, ccNtpCurrentDateTime, ccRadiusAuthTypePeap,
ccRadiusAuthTypeTtls, ccRadiusClientAuthRowStatus, ccRadiusProxyServerPrefixOrSuffix, ccSubnetAccessAdvInSrcIp, ccSubnetAccessAdvInSrcIpLength,
ccSubnetAccessAdvInDestIp, ccSubnetAccessAdvInDestIpLength, ccSubnetAccessAdvInTransport, ccSubnetAccessAdvInSrcPortStart, ccSubnetAccessAdvInSrcPortEnd,
ccSubnetAccessAdvInDestPortStart, ccSubnetAccessAdvInDestPortEnd, ccSubnetAccessAdvInAction, ccSubnetAccessAdvInRowStatus, ccSubnetAccessAdvOutIndex,
ccSubnetAccessAdvOutSrcIp, ccSubnetAccessAdvOutSrcIpLength, ccSubnetAccessAdvOutDestIp, ccSubnetAccessAdvOutDestIpLength, ccSubnetAccessAdvOutTransport,
ccSubnetAccessAdvOutSrcPortStart, ccSubnetAccessAdvOutSrcPortEnd, ccSubnetAccessAdvOutDestPortStart, ccSubnetAccessAdvOutDestPortEnd, ccSubnetAccessAdvOutReverseNat,
ccSubnetAccessAdvOutAction, ccTrapCtrlRedundancyPreviousOperState, ccSubnetAccessAdvOutRowStatus, ccWanNatLowestUnusedSlot, ccSubnetAccessPtrToRules,
ccSubnetAccessRuleSrcPtr, ccSubnetAccessRuleDestPtr, ccSubnetAccessRuleTransport, ccSubnetAccessRuleStartPort, ccSubnetAccessRuleEndPort,
ccSubnetAccessRuleRowStatus, ccTrapCtrlEnableIndex, ccTrapCtrlEnableName, ccTrapCtrlEnable, ccWlanQosMonitorSent,
ccWlanQosMonitorDropped, ccWlanSumStatsShortPp10kDropped, ccRadiusProxyServerRowStatus, ccWanVpnIndex, ccWanNatOutboundEnable,
ccRapResultsApprovedIndex, ccRapResultsRogueIndex, ccWlanSumStatsLongPp10kDropped, ccSnmpAccessV3User, ccSnmpV3EngineId,
ccCertMgntSelfCertsReqIndex, ccCertMgntSelfCertsReqKeyId, ccCertMgntSelfCertsReqSubject, ccCertMgntSelfCertsReqDept, ccCertMgntSelfCertsReqOrg,
ccCertMgntSelfCertsReqCity, ccCertMgntSelfCertsReqState, ccCertMgntSelfCertsReqPostal, ccCertMgntSelfCertsReqCountry, ccCertMgntSelfCertsReqEmail,
ccCertMgntSelfCertsReqDomain, ccCertMgntSelfCertsReqIp, ccCertMgntSelfCertsReqSigAlgo, ccCertMgntSelfCertsReqKeyLen, ccCertMgntSelfCertsReqGenReq,
ccCertMgntSelfCertsReqCertReqStr, ccCertMgntSelfCertsReqRowStatus, ccCertMgntSelfCertsSignedStr, ccCertMgntSelfCertsSignedImport, ccCertMgntSelfCertsSignedIndex,
ccCertMgntSelfCertsSignedKeyId, ccCertMgntSelfCertsSignedIssuerName, ccCertMgntSelfCertsSignedSubject, ccCertMgntSelfCertsSignedSerialNumber, ccCertMgntSelfCertsSignedExpiry,
ccCertMgntSelfCertsSignedDeleteRow, ccCACertsStr, ccCACertsImport, ccCACertsIndex, ccCACertsKeyId,
ccCACertsIssuerName, ccCACertsSubject, ccCACertsSerialNumber, ccCACertsExpiry, ccCACertsDeleteRow,
ccPortalSettingsName, ccPortalSettingsLocation, ccPortalSettingsAntenna, ccPortalSettingsShortPreamble, ccPortalSettingsUniSpread,
ccPortalSettingsRtsThresh, ccPortalSettingsBeaconInt, ccPortalSettingsDtimPrd, ccPortalSettingsSecBeacon, ccPortalSettingsPriWlan,
ccPortalSettingsBasicRates, ccPortalSettingsSupportedRates, ccPortalSettingsBGMode, ccPortalSettingsAdoptedWlan, ccPortalCfgRadioDesPlacement,
ccPortalCfgRadioPosChannel, ccPortalCfgRadioDesChannel, ccPortalCfgRadioPosPowerLevel, ccPortalCfgRadioDesPowerLevel, ccPortalCfgRadioPowerInMW,
ccPortalCfgRadioSet, ccPortalCfgRadioReset, ccPortalCfgRadioPlacement, ccPortalCfgRadioChannel, ccPortalCfgRadioPowerLevel,
ccPortalSettingsDefaultAntenna, ccPortalSettingsDefaultShortPreamble, ccPortalSettingsDefaultUniSpread, ccPortalSettingsDefaultRtsThresh, ccPortalSettingsDefaultBeaconInt,
ccPortalSettingsDefaultDtimPrd, ccPortalSettingsDefaultSecBeacon, ccPortalSettingsDefaultPriWlan, ccPortalSettingsDefaultBasicRates, ccPortalSettingsDefaultSupportedRates,
ccPortalSettingsDefaultBGMode, ccPortalCfgRadioDefaultDesPlacement, ccPortalCfgRadioDefaultPosChannel, ccPortalCfgRadioDefaultDesChannel, ccPortalCfgRadioDefaultPosPowerLevel,
ccPortalCfgRadioDefaultDesPowerLevel, ccPortalCfgRadioDefaultSet, ccPortalCfgRadioDefaultReset, ccPortalCfgRadioDefaultPlacement, ccPortalCfgRadioDefaultChannel,
ccPortalCfgRadioDefaultPowerLevel, cc802dt1xPortAuthLogin, cc802dt1xPortAuthPass, cc802dt1xPortAuthSetAp300, ccPortalSettingsDefaultIndex,
ccRapPortalResultsIndex, ccRapAuthCopyAllRogue, ccPortalSettingsDetector, ccRedundancyHeartbeatInterface, ccRadiusCACertificate,
ccRadiusServerCertificate, ccSubnetDhcpServerDomainName, ccSubnetDhcpServerWinsServer, ccCertMgntSelfCertsIdName, ccPortalSystemStatsProbeRespRetries3OrMore,
ccPortalSumStatsLongPp10kTxMaxRetries, ccWlanCryptoWpaTwoFastRoamKeyCache, ccWlanCryptoWpaTwoFastRoamPreAuth, ccWlanCryptoWpaTwoAllowTkipClient, ccWlanCryptoWpaTwoKey,
ccWlanCryptoWpaTwoPassphrase, ccWlanCryptoWpaTwoKeyToUse, ccWlanCryptoWpaTwoKeyRotationInterval, ccWlanCryptoWpaTwoBcastKeyRotation, ccSubnetAccessAdvOverrideMode,
ccSubnetAccessAdvImportRules, ccWlanAuthEapSyslogMode, ccWlanAuthEapSyslogSeverIp, ccMgmtAccessHttpsTimeout, ccNtpSyncInterval,
ccWanNatTimeout, ccLoggingDeleteCoreFile, ccLoggingTransferCoreFile, ccWlanAuthEapRadiusAcctMuRetries, ccWanVpnKeyAutoIkeAuthType,
ccWanNatInboundTranslationPort, ccRedundancyOperMode, ccRapResultsApprovedChannel, ccRapResultsRogueChannel, ccPortalCfgRadioDefaultDesPowerInMW,
ccPortalCfgRadioDesPowerInMW, ccPortalCfgRadioDefaultPowerInMW, ccWlanAuthEapRadiusAcctMode, ccWlanAuthEapRadiusAcctMuTimeout, ccSubnetAccessAdvInReverseNatIp,
ccSubnetAccessAdvInReverseNatPort, ccDnsRelayMode, ccSslv2Mode, ccSshv1Mode, ccWeakCipherSupport }
STATUS current
DESCRIPTION
"Description."
::= { ccGroupsV2dot0 1 }
-- 1.3.6.1.4.1.388.11.2.1000.3.2
ccGroupsV2dot0obsoleted OBJECT-GROUP
OBJECTS { ccWlanSumStatsShortSkip1, ccWlanSumStatsLongSkip1, ccRadiusAccessWlanPtrs, ccRadiusUsersGroup, ccRadiusUsersGroupRowStatus,
ccRadiusUsersGroupId }
STATUS obsolete
DESCRIPTION
"Description."
::= { ccGroupsV2dot0 2 }
-- 1.3.6.1.4.1.388.11.2.1000.3.3
ccGroupsV2dot0notifications NOTIFICATION-GROUP
NOTIFICATIONS { ccPortalAdopted, ccPortalUnAdopted, ccPortalDenied, ccMuAssociated, ccMuUnAssociated,
ccMuDenied, ccConfigChange, ccSnmpAclViolation, ccPortStatusChange, ccCfAlmostFull,
ccFirewallUnderAttack, ccRadarDetected, ccSumStatsMu, ccSumStatsPortal, ccSumStatsWlan,
ccSumStatsSwitch, ccLanVlanActivated, ccDhcpOptionsFileTransferStatus, ccRapNewApprovedAp, ccRapNewRogueAp,
ccRedundancyStateChange }
STATUS current
DESCRIPTION
"Description."
::= { ccGroupsV2dot0 3 }
END
--
-- SYMBOL-CC-WS2000-MIB-2.0.mib
--
Reference in New Issue View Git Blame Copy Permalink