MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/fpipes.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

783 lines
25 KiB
Plaintext
Executable File
Raw Blame History

NETWORTH-FASTPIPES-MIB DEFINITIONS ::= BEGIN
-- This is the draft mib of the FastPipes Proprietary MIB.
-- Here are the sysobject ids for FastPipes
-- networth ::= { enterprises 215 }
-- networthProducts ::= { networth 1 }
-- networthInternetworking ::= { networthProduct 2 }
-- nwFastPipes ::= { networthInternetworking 2 }
-- nwFastPipesModular ::= nwFastPipes.1.*.*
-- nwFastPipesNonModular ::= nwFastPipes.2.*.*
-- nwFastPipesNoUplink ::= nwFastPipes.*.1.*
-- nwFastPipesUplinkFDDI ::= nwFastPipes.*.2.*
-- nwFastPipesUplinkATM ::= nwFastPipes.*.3.*
-- nwFastPipesUpLink100BT ::= nwFastPipes.*.4.*
-- nwFastPipesUpLink100VG ::= nwFastPipes.*.5.*
-- nwFastPipesNonRouter ::= nwFastPipes.*.*.1
-- nwFastPipesRouter ::= nwFastPipes.*.*.2
-- Note that this defines 20 possible configurations (modular(2) x uplink(5) x
-- router(2) ) and 20 corresponding sysObjID's.
IMPORTS
enterprises, IpAddress FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215
OBJECT-TYPE FROM RFC-1212;
networth OBJECT IDENTIFIER ::= { enterprises 215 }
networthProducts OBJECT IDENTIFIER ::= { networth 1 }
networthInternetworking OBJECT IDENTIFIER ::= { networthProducts 2 }
nwFastPipes OBJECT IDENTIFIER ::= { networthInternetworking 2 }
nwfpProductType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The switch product type based on whether the switch is modular or
nonmodular, has one of four uplinks or none, and has routing or not.
The product types are:
Modular with no Uplink and no Routing
Modular with no Uplink and Routing
Modular with FDDI Uplink and no Routing
Modular with FDDI Uplink and Routing
Modular with ATM Uplink and no Routing
Modular with ATM Uplink and Routing
Modular with 100BT Uplink and no Routing
Modular with 100BT Uplink and Routing
Modular with 100VG Uplink and no Routing
Modular with 100VG Uplink and Routing
NonModular with no Uplink and no Routing
NonModular with no Uplink and Routing
NonModular with FDDI Uplink and no Routing
NonModular with FDDI Uplink and Routing
NonModular with ATM Uplink and no Routing
NonModular with ATM Uplink and Routing
NonModular with 100BT Uplink and no Routing
NonModular with 100BT Uplink and Routing
NonModular with 100VG Uplink and no Routing
NonModular with 100VG Uplink and Routing"
::= { nwFastPipes 1 }
nwfpReset OBJECT-TYPE
SYNTAX INTEGER
{
no-reset(1),
reset(2),
reset-and-erase-config(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to reset(2) will cause the FastPipes to
perform a hardware reset within approximately 5 seconds.
Setting this object to reset-and-erase-config(3) will cause
the switch to perform a hardware reset to all config values stored
in nvram to default values within approximately 5 seconds.
Setting this object to no-reset(1) will have no effect. The
value no-reset(1) will be returned whenever this object is
retrieved.
The primary purpose for including this variable in the FastPipes
MIB is to allow SNMP managers to modify the operational mode
of the FastPipes."
::= { nwFastPipes 2 }
nwfpCurrentSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of software currently running on the switch. The version
is specified in ASCII format"
::= { nwFastPipes 3 }
nwfpFutureSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The version of software the switch will run after the next reset.
If this variable is different than nwfpCurrentSoftwareVersion,
the switch will request a download for the new software the next
time the switch is reset (as in setting the variable nwfpReset or
power cycling the unit). The version should be specified
as an ASCII string."
::= { nwFastPipes 4 }
nwfpTFTPServerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the TFTP Server to which the FastPipes will send
its next TFTP request."
::= { nwFastPipes 5 }
nwfpCurrentUplinkSoftwareVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of software currently running on the switch's Uplink
Card. The version is an ASCI string of the form."
::= { nwFastPipes 6 }
nwfpFutureUplinkSoftwareVers OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The version of software the switch's Uplink Card will run after the
next reset. If this variable is different than
nwfpCurrentUplinkSoftwareVers, the switch will request a download
for the new software the next time the switch is reset (as in setting
the variable nwfpReset or power cycling the unit). The version
should be specified as an ASCII string."
::= { nwFastPipes 7 }
nwfpLastFailureReason OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last error that caused a switch failure. A value of zero (0)
indicates that there has not been a switch failure since the nvram
was last erased.
A non-zero value indicates the reason for the last switch failure.
A normal switch reset or power cycle will not change the value of
this variable (it will still indicate the reason for the last
known failure)."
::= { nwFastPipes 8 }
nwfpEEPROMVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware EEPROM version. The string 'unknown' is returned if
the value is not known."
::= { nwFastPipes 9 }
nwfpManufactureDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware manufacture date. The string 'unknown' is returned if
the value is not known."
::= { nwFastPipes 10 }
nwfpAuthErrIPaddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the device that sent the SNMP packet that caused
an authentication error trap to be issued by the switch."
::= { nwFastPipes 11 }
nwfpRAMsize OBJECT-TYPE
SYNTAX INTEGER
{
one-MB(1),
two-MB(2),
four-MB(4),
eight-MB(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of RAM."
::= { nwFastPipes 12 }
nwfpEthernetTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwfpEthernetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ethernet-port-specific information for the FastPipes.
This table augments the Ethernet RFC1398 MIB."
::= { nwFastPipes 13 }
nwfpEthernetEntry OBJECT-TYPE
SYNTAX NwfpEthernetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for every ethernet interface."
INDEX { nwfpIfIndex }
::= { nwfpEthernetTable 1 }
NwfpEthernetEntry ::= SEQUENCE {
nwfpIfIndex
INTEGER,
nwfpBOOTPrequestFlag
INTEGER
}
nwfpIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet interface number that corresponds to the ifIndex value
in mib-2."
::= { nwfpEthernetEntry 1 }
nwfpBOOTPrequestFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This flag determines whether this ethernet interface will send a BOOTP
request. When booting, the FastPipes will broadcast a BOOTP request
from the lowest ethernet interface with this value enabled(1). If that
BOOTP request fails, the FastPipes will broadcast another BOOTP request
from the next ethernet interface with this value enabled(1). At least
one ethernet interface must have this value enabled(1) or BOOTP will
not work."
::= { nwfpEthernetEntry 2 }
nwfpBOOTPServerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the BOOTP Server that responded to the FastPipes's
BOOTP request."
::= { nwFastPipes 18 }
nwfpBOOTPEthernetIF OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Ethernet interface number that successfully completed the BOOTP
interaction."
::= { nwFastPipes 19 }
nwfpUplinkSoftwarePath OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The path to the switch software file. Following this path will reveal
the actual version of the file."
::= { nwFastPipes 20 }
nwfpSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware serial number."
::= { nwFastPipes 21 }
nwfpConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
fsp12(500),
fsp6(501),
fsp11(502),
fsp12fx(503),
fsp6fl(504)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object returns the type of base module that is being queried."
::= { nwFastPipes 22 }
nwfpUpLinkEEPROMVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The uplink EEPROM version. The string 'unknown' is returned
if the value is not known."
::= { nwFastPipes 23 }
nwfpUpLinkManufactureDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The uplink manufacture date. The string 'unknown' is returned if
the value is not known."
::= { nwFastPipes 24 }
nwfpUpLinkSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The uplink serial number."
::= { nwFastPipes 25 }
nwfpUpLinkConfiguration OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
fddi-fiber-das(2),
fddi-fiber-sas(3),
fddi-tppmd-sas(4),
ethernet-100mbps-t4(5),
ethernet-100mbps-tx(6),
ethernet-100mbps-fx(7),
atm(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object returns the type of HSSP (Uplink) module that is in the
base unit."
::= { nwFastPipes 26 }
nwfpSoftwarePath OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The path to the switch software file. Following this path will
reveal the actual version of the file."
::= { nwFastPipes 27 }
nwfpCurrentBooterSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of Booter software currently running on the switch.
The version is an ASCII string."
::= { nwFastPipes 28 }
nwfpFutureBooterSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The version of Booter software the switch will run after the next reset.
If this variable is different than nwfpCurrentSoftwareVersion,
the switch will request a download for the new software the next
time the switch is reset (as in setting the variable nwfpReset or
power cycling the unit). The version is an ASCII string."
::= { nwFastPipes 29 }
nwfpBooterSoftwarePath OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The path to the Booter software file. Following this path will
reveal the actual version of the file."
::= { nwFastPipes 30 }
nwfpSaveConfig OBJECT-TYPE
SYNTAX INTEGER
{
config-info-saved(1),
save-all(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the user to permanently save configuration parameters
into the NVRAM of a managed device. It can only be written with
save-all(2). Writing this object with config-info-saved(1) has no effect.
Setting this object to save-all(2) will save all configuration info
changed into the NVRAM.
Reading this object will normally return config-info-saved(1) if the
previous save operation is successful. It will return the value set when
the previous set operation failed."
::= { nwFastPipes 31 }
nwfpFddiIPFrag OBJECT-TYPE
SYNTAX INTEGER
{
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When on(2), the FastPipes FDDI Uplink will perform IP fragmentation.
When off(1), IP fragmentation is not done and FDDI frames containing
IP information that exceed the Ethernet maximum frame size will
be dropped. Default mode is on(2)."
::= { nwFastPipes 32 }
nwfpFddiToEthIPTrans OBJECT-TYPE
SYNTAX INTEGER
{
ethernet-ii(1), -- Translate from FDDI to Ethernet_II frame only
ethernet-802-3-RAW(2), -- Translate from FDDI to ethernet-802.3 RAW only
automatic(3) -- Translate from FDDI to any of above frame types
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines how FDDI frames containing IP packets get
translated into Ethernet frames. When automatic(3) mode is selected,
then FDDI frames are translated either in 802.3 RAW or ethernet-ii frames,
depending on the FDDI frame format (FDDI SNAP frames are translated into
ethernet-ii frames and FDDI 802.2 frames are translated into 802.3 RAW
frames). When ethernet-802-3-RAW(2) mode is selected, all FDDI frames are
translated into 802.3 RAW frames. When ethernet-ii(1) mode is selected,
all FDDI frames are translated into ethernet-ii frames. Default mode is
automatic(3)."
::= { nwFastPipes 33 }
nwfpFddiSNAPToEthIPXTrans OBJECT-TYPE
SYNTAX INTEGER
{
ethernet-ii(1), -- Translate from FDDI SNAP to Ethernet_II frame
ieee8022snap(2) -- Translate from FDDI SNAP to 802.3 with 802.2 SNAP
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines how incoming FDDI SNAP frames containing IPX
information are translated into ethernet frames. When ethernet-ii(1) mode
is selected, then, the incoming FDDI SNAP frames are translated into
ethernet-ii frames. When ieee8022snap(2) is selected, then the incoming
FDDI SNAP frames are translated into ethernet SNAP frames. Default mode
is ethernet-ii(1)."
::= { nwFastPipes 34 }
nwfpFddi8022ToEthIPXTrans OBJECT-TYPE
SYNTAX INTEGER
{
ethernet-802-3-RAW(1), -- Translate from FDDI802.2 to ethernet-802.3 RAW
ieee8022(2) -- Translate from FDDI802.2 to 802.3 with 802.2
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines how incoming FDDI 802.2 frames containing IPX
information are translated into ethernet frames. When the 802-3-Raw(1)
mode is selected, then, incoming FDDI 802.2 frames are translated into
802.3 Raw format. When the 802-2(2) format is selected, then incoming
FDDI 802.2 frames are translated into 802.2 frames. Default mode is
802-3-Raw(1)."
::= { nwFastPipes 35 }
nwfpFddiLocTrafFiltering OBJECT-TYPE
SYNTAX INTEGER
{
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines whether or not traffic local to the FDDI network the FastPipes
is connected to is filtered or not (i.e not forwarded to the FastPipes
switch process). The default is on(2)"
::= { nwFastPipes 36 }
nwfpSpanningTreeEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to enable(1), the FastPipes will run the Spanning Tree Protocol
(STP). When set to disable(2), the FastPipes will not run STP. Default
value is enable(1)."
::= { nwFastPipes 37 }
nwfpTpFdbMaxSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gives the maximum number of entries that the forwarding data base may
have "
::= { nwFastPipes 38 }
nwfpTpFdbNbEntriesUsed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gives the number of entries currently existing in the forwarding data
base."
::= { nwFastPipes 39 }
nwfpEthIPX8023ToFddiTrans OBJECT-TYPE
SYNTAX INTEGER
{
ethernet-802-3-RAW(1),
ieee8022(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to ieee8022(2), an LLC header is added to the FDDI
frame, between the MAC header and the IPX header. When set to
ethernet-802-3-RAW(1), 802.3 raw packet format will be used in performing
packet translation. The default mode is ethernet-802-3-RAW(1)."
::= { nwFastPipes 40 }
--
-- Power Supply Table: This table will supply information regarding the
-- power supplies in the unit. The table will always return 2 entries, one
-- for each supply. If a supply is in and working the status will be on(1).
-- If a supply is in but bad or has no power, the status will be off(2). If
-- the supply is not in, the status is na(3).
--
nwfpPowerSupplyNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of system power supplies installed (regardless of their
current state) in the FastPipe product."
::= { nwFastPipes 41 }
nwfpPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwfpPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of system power supply specific information for the FastPipes."
::= { nwFastPipes 42 }
nwfpPowerSupplyEntry OBJECT-TYPE
SYNTAX NwfpPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for every power supply installed"
INDEX { nwfpPowerSupplyIndex }
::= { nwfpPowerSupplyTable 1 }
NwfpPowerSupplyEntry ::= SEQUENCE {
nwfpPowerSupplyIndex
INTEGER,
nwfpPowerSupplyStatus
INTEGER
}
nwfpPowerSupplyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each power supply."
::= { nwfpPowerSupplyEntry 1 }
nwfpPowerSupplyStatus OBJECT-TYPE
SYNTAX INTEGER
{
good(1), -- power supply exists and operates okay
bad(2), -- power supply exists but is bad or no power applied
na(3) -- power supply does not exist
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the power supply. The value good(1) is returned if the
power supply identified by nwfpPowerSupplyIndex is running properly. The
value bad(2) is returned if the power supply identified by nwfpPowerSupplyIndex
has failed to operate properly but has been inserted into the slot. This
will include an inserted power supply with no power. The value na(3) is
returned if the power supply has not been inserted into the slot."
::= { nwfpPowerSupplyEntry 2 }
--
-- Fan Supply Table: This table will supply information regarding the
-- fans in the unit. The table will always return 2 entries, one for each
-- fan. If a fan is working, the status will be good(1). If a fan is bad,
-- the status will be bad(2).
--
nwfpFanNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of system fans installed (regardless of their current state)
in the FastPipe product."
::= { nwFastPipes 43 }
nwfpFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwfpFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of system fan specific information for the FastPipes."
::= { nwFastPipes 44 }
nwfpFanEntry OBJECT-TYPE
SYNTAX NwfpFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for every fans installed"
INDEX { nwfpFanIndex }
::= { nwfpFanTable 1 }
NwfpFanEntry ::= SEQUENCE {
nwfpFanIndex
INTEGER,
nwfpFanStatus
INTEGER
}
nwfpFanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each fan. Its value ranges between 1 and the value
of nwfpFanNumber."
::= { nwfpFanEntry 1 }
nwfpFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
good(1),
bad(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the system fan. The value good(1) is returned if the fan
identified by nwfpFanIndex is running properly. The value bad(2) is
returned if the fan identified by nwfpFanIndex has failed to operate
properly."
::= { nwfpFanEntry 2 }
--
-- Monitor Port Information
--
nwfpMonitorPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The index value of a port which will receive all traffic from
the ports specified in the nwfpMonitorSource bitmask. Acceptable
values are 1 to Max port number."
::= { nwFastPipes 45 }
nwfpMonitorSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A bitmask of the port numbers to monitor. This bitmask (which
must not include the port number used for nwfpMonitorPort) specifies
which ports are to be monitored. Traffic sent to the ports specified
in this bitmask will also be sent to nwfpMonitorPort. Bit 0
in the bitmask corresponds to port 1, bit 1 corresponds to port 2,
and so on.
The greater the number of ports specified in the bitmask,
the lower the integrity of information to the monitoring port. i.e.
the more ports monitored, the greater the probability of lost data."
::= { nwFastPipes 46 }
nwfpMonitorPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Status value of RMON monitoring. When set to disabled the port
specified in nwfpMonitorPort will not receive monitored data. When set to
enabled the port will begin recieving data from the ports
specified in nwfpMonitorSource."
::= { nwFastPipes 47 }
-- TRAPS
-- Power supply and fan related traps:
nwfpPowerSupplyDown TRAP-TYPE
ENTERPRISE networth
VARIABLES { nwfpPowerSupplyIndex,
nwfpPowerSupplyStatus }
DESCRIPTION
"A nwfpPowerSupplyDown trap signifies that a system power supply has
stopped running. This trap will only be generated when the system power
supply changes its operational state from up to down due to internal
failure."
--#TYPE "PowerSupplyDown"
--#SUMMARY "PowerSupplyDown"
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 11
nwfpPowerSupplyUp TRAP-TYPE
ENTERPRISE networth
VARIABLES { nwfpPowerSupplyIndex,
nwfpPowerSupplyStatus }
DESCRIPTION
"A nwfpPowerSupplyUp trap signifies that a system power supply is up
and running. This trap will only be generated when the system power
supply changes its operational state from down to up. "
--#TYPE "PowerSupplyUp"
--#SUMMARY "PowerSupplyUp"
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
::= 12
nwfpfanDown TRAP-TYPE
ENTERPRISE networth
VARIABLES { nwfpFanIndex,
nwfpFanStatus }
DESCRIPTION
"A nwfpfanDown trap signifies that a system fan has stopped running.
This trap will only be generated when the system fan changes its
operational state from up to down due to internal failure. "
--#TYPE "fanDown"
--#SUMMARY "fanDown"
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 13
nwfpfanUp TRAP-TYPE
ENTERPRISE networth
VARIABLES { nwfpFanIndex,
nwfpFanStatus }
DESCRIPTION
"A nwfpfanUp trap signifies that a system fan is up and running.
This trap will only be generated when the system fan changes its
operational state from down to up. "
--#TYPE "FanUp"
--#SUMMARY "fanUp"
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
::= 14
END
Reference in New Issue View Git Blame Copy Permalink