MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-22 18:20:51 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
616cd827e5
snmp_mib_archive/dmtfdmi.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1361 lines
45 KiB
Plaintext
Executable File
Raw Blame History

DMTFDMI DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM SNMPv2SMI;
-- MODULE-IDENTITY, OBJECT-IDENTITY,
-- OBJECT-TYPE,
-- TRAP-TYPE
-- FROM SNMPv2SMI
--
-- TEXTUAL-CONVENTION
-- FROM SNMPv2TC
-- OBJECT-GROUP, NOTIFICATION-GROUP,
-- MODULE-COMPLIANCE
-- FROM SNMPv2-CONF
--dmiMIB MODULE-IDENTITY
-- LAST-UPDATED "9710221800Z"
-- ORGANIZATION "DMTF SNMP/DMI Mapping Working Committee"
-- CONTACT-INFO
-- " Brian O'Keefe
-- Postal: Hewlett-Packard Company, Inc.
-- 3404 East Harmony Road, M/S A2
-- Fort Collins, CO 80528
-- Tel: +1 970 898 4303
-- Fax: +1 970 898 2038
-- E-mail: brian_okeefe@hp.com
-- Bok@cnd.hp.com
--
-- Steve Bostock
-- Postal: Novell, Inc.
-- 2180 Fortune Drive
-- M/S F5-92-2
-- San Jose, CA 95131
-- Tel: +1 408 577 8203
-- Fax: +1 408 577 5706
-- E-mail: steveb@novell.com
-- Steve_Bostock@novell.com
-- "
-- DESCRIPTION
-- "The DMTF DMI MIB provides the framework for accessing
-- DMI instrumented information and receiving DMI
-- indications through an SNMP/DMI Mapping Agent.
--
-- This MIB contains the following definitions:
-- 1. A set of Textual Conventions used within this MIB and to be
-- available for IMPORT by other MIBs created with the MIF-to-MIB
-- mapping procedures.
-- 2. A set of SNMP tables that model the DMI MI List Commands.
-- These tables provide access to information about the DMI
-- components and groups installed on the managed system; plus the
-- MIF meta-data for the corresponding DMI classes.
-- 3. A set of definitions that model the DMI Indications
-- and standard Event Generation group."
-- REVISION "9507132000Z"
-- DESCRIPTION
-- "Draft proposed to DMTF as Remote DMI method, but
-- not pursued further. (Bostock)"
-- REVISION "9710221800Z"
-- DESCRIPTION
-- "Resurrected to bridge the co-existance gap
-- between SNMP and DMI management frameworks in
-- enterprise environments. Updated to reflect DMI
-- 2.0 changes; including: formal SNMP pragma
-- statement, final DMI event generation template and
-- indications, new DMTF standard MIFs, plus
-- allowance for remote SNMP/DMI proxy support. Also
-- revised to use SNMPv2 SMI. (O'Keefe)"
-- ::= { dmtf 1 }
--
-- MIB Module Organization
--
dmtf OBJECT IDENTIFIER ::= { enterprises 412 }
dmiMIB OBJECT IDENTIFIER ::= { dmtf 1 }
dmtfStdMifs OBJECT IDENTIFIER ::= { dmtf 2 }
dmtfDynOids OBJECT IDENTIFIER ::= { dmtf 3 }
dmiMIBObjects OBJECT IDENTIFIER ::= { dmiMIB 1 }
dmiClasses OBJECT IDENTIFIER ::= { dmiMIBObjects 1}
dmiComponents OBJECT IDENTIFIER ::= { dmiMIBObjects 2 }
dmiMappingAgent OBJECT IDENTIFIER ::= { dmiMIBObjects 3}
dmiNotifications OBJECT IDENTIFIER ::= { dmiMIB 2 }
dmiIndications OBJECT IDENTIFIER ::= { dmiNotifications 0 }
dmiEventVars OBJECT IDENTIFIER ::= { dmiNotifications 1 }
dmiMIBConformance OBJECT IDENTIFIER ::= { dmiMIB 3 }
dmiMIBCompliances OBJECT IDENTIFIER ::= { dmiMIBConformance 1 }
dmiMIBGroups OBJECT IDENTIFIER ::= { dmiMIBConformance 2 }
dmiNotificationGroups OBJECT IDENTIFIER ::= { dmiMIBConformance 3 }
--
-- Textual Conventions
--
--DmiAccess ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "The access level of a DMI Attribute. The access
-- determines whether the attribute value can be read
-- or written."
-- SYNTAX INTEGER { -- matches DMI encodings
-- unknown(1), -- MIF database error
-- readOnly(2),
-- readWrite(3),
-- writeOnly(4),
-- unsupported(5)
-- }
DmiAccess ::= INTEGER {
unknown(1), -- MIF database error
readOnly(2),
readWrite(3),
writeOnly(4),
unsupported(5)
}
--
--Dmi_Date ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "The SNMP representation of the DMI Date data
-- type. It is a 25 octet fixed length displayable
-- string with the following format:
--
-- Octets Contents Encoding
-- 1-4 year decimal
-- 5-6 month decimal(1..12)
-- 7-8 day decimal(1..31)
-- 9-10 hour decimal(0..23)
-- 11-12 minutes decimal(0..59)
-- 13-14 seconds decimal(0..59)
-- 15 dot '.'
-- 16-21 microseconds decimal(0..999999)
-- 22-25 offset from UTC ['+'|'-'](000..720)
-- in minutes"
-- SYNTAX OCTET STRING (SIZE (25))
Dmi_Date ::= OCTET STRING (SIZE (25))
--
-- Dmi_Integer64 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "SNMP representation of a DMI Integer64 data type
-- is an octet string of exactly 8 octets, in network
-- byte order."
-- SYNTAX OCTET STRING (SIZE(8))
Dmi_Integer64 ::= OCTET STRING (SIZE(8))
--
--
--DmiString ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "A DMI displayable string. The content of the string
-- may be any characters from either the ISO 8859-1 or
-- Unicode character sets, but not intermixed. The string
-- always includes a NULL (zero) termination character.
-- The length of a string specifies the number of octets
-- in the string, including the null termination
-- character. For ISO 8859-1, there is one octet per
-- character. For Unicode, there are two octets per
-- character, including the NULL terminator."
-- SYNTAX OCTET STRING
DmiString ::= OCTET STRING
--
--
--DmiType ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "The MIF syntax (data type) of a DMI Attribute."
-- SYNTAX INTEGER {
-- unknown(1), -- indicates MIF database error
-- counter32(2),
-- counter64(3),
-- gauge32(4),
-- integer32(5),
-- integer64(6),
-- octetString(7),
-- displayString(8),
-- date(9)
-- }
DmiType ::= INTEGER {
unknown(1), -- indicates MIF database error
counter32(2),
counter64(3),
gauge32(4),
integer32(5),
integer64(6),
octetString(7),
displayString(8),
date(9)
}
--
--DmiTDAddress ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "Denotes a transport domain and address, much like the
-- TDomain and TAddress textual convention pair defined in
-- RFC 1902, yet in a more compact representation.
--
-- The first octet identifies the transport domain. This
-- value directly corresponds to the value of the
-- transport domain object sub-identifier, as defined in
-- RFC1906, that is subordinate to
-- iso.org.dod.internet.snmpV2.snmpDomains.
--
-- The remaining octets conform to the transport address
-- syntax associated with the specified transport domain.
--
-- For example, a value of 1 in the first octet
-- corresponds to snmpUDPDomain, so the remaining octets
-- conform to the syntax of snmpUDPAddress.
--
-- For convienence, the mappings are summarized as
-- follows. Note that UDP/IP and IPX are fixed length;
-- CLNS, CONS and DDP are variable length.
--
-- DmiTDAddress octets
-- Domain 1 2 3 4 5 6 7 8 9 10 11 12 13 14
-- 15...
-- ====== == == == == == == == == == == == == == == ==
-- UDP/IP 1 <ip-address> <port>
-- CLNS 2 <n> <nsap-address..n> <t-selector...m>
-- CONS 3 <n> <nsap-address..n> <t-selector...m>
-- DDP 4 <n> <object...n><p><type..p><q><zone...q>
-- IPX 5 <net-number> <physical-addres> <sock>
-- "
-- REFERENCE
-- "RFC 1906, Transport Mappings for SNMP Version 2"
-- SYNTAX OCTET STRING (SIZE (1..255))
DmiTDAddress ::= OCTET STRING (SIZE (1..255))
--
--
--
-- MIF Database: Class Definitions
--
dmiClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiClassEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"The MIF definitions for all group classes known to the
Service Layer."
::= { dmiClasses 1 }
dmiClassEntry OBJECT-TYPE
SYNTAX DmiClassEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"The meta-data defining a particular group class.
If multiple versions of a particular group class
are registered with the Service Layer, the data in
this entry shall pertain to the highest version."
INDEX { dmiClassIndex }
::= { dmiClassTable 1 }
DmiClassEntry ::= SEQUENCE {
dmiClassIndex Gauge,
dmiClassString OCTET STRING,
dmiClassVersion INTEGER,
dmiClassName OCTET STRING,
dmiClassOID OBJECT IDENTIFIER,
dmiClassKeyCount INTEGER,
dmiClassDescrLength INTEGER,
dmiClassPragma OCTET STRING,
--
-- dmiClassIndex Unsigned32,
-- dmiClassString DmiString,
-- dmiClassVersion INTEGER,
-- dmiClassName DmiString,
-- dmiClassOID OBJECT IDENTIFIER,
-- dmiClassKeyCount INTEGER,
-- dmiClassDescrLength INTEGER,
-- dmiClassPragma DmiString
}
dmiClassIndex OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each group class known to the
mapping agent for this managed node. The value
for each class must remain constant at least from
one re-initialization of the mapping agent to the
next re-initialization. This value is NOT
necessarily equal to the Group ID assigned within
a given Component by the DMI Service Layer."
::= { dmiClassEntry 1 }
dmiClassString OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The 'class string' assigned to the group in the
'class' statement."
::= { dmiClassEntry 2 }
dmiClassVersion OBJECT-TYPE
SYNTAX INTEGER (0..999)
ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the group definition
providing it appeared as an integer in the 'class
string'; zero otherwise."
::= { dmiClassEntry 3 }
dmiClassName OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The 'group name' from the 'name' statement in the
group definition."
::= { dmiClassEntry 4 }
dmiClassOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS current
DESCRIPTION
"The OBJECT IDENTIFIER of the conceptual table
representing the group in an SNMP MIB. Attributes
of the group may be accessed as columnar objects
of this table, indexed according to the rules
specified in RFC-nnnn."
::= { dmiClassEntry 5 }
dmiClassKeyCount OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS current
DESCRIPTION
"The number attributes that comprise a key for
this group; zero if no 'key' statement appeared in
the group definition.
The ordered list of attribute Id's that comprise
the key can be obtained from the dmiKeyTable"
::= { dmiClassEntry 6 }
dmiClassDescrLength OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"The total length (in octets) of the 'description
string' from the 'description' statement in the
group definition. This string can be retrieved
in segments from the dmiDescrTable"
::= { dmiClassEntry 7 }
dmiClassPragma OBJECT-TYPE
SYNTAX DmiString
ACCESS read-only
STATUS current
DESCRIPTION
"The 'group name' from the 'name' statement in the
group definition."
::= { dmiClassEntry 8 }
--
-- MIF Database: Attribute Definitions
--
dmiAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiAttributeEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing all the meta-data for all
attributes of each registered group class."
::= { dmiClasses 2 }
dmiAttributeEntry OBJECT-TYPE
SYNTAX DmiAttributeEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"The meta-data defining a particular DMI
attribute."
INDEX { dmiClassIndex, dmiAttrId }
::= { dmiAttributeTable 1 }
DmiAttributeEntry ::= SEQUENCE {
dmiAttrId Unsigned32,
dmiAttrName DmiString,
-- dmiAttrAccess DmiAccess,
dmiAttrAccess INTEGER,
dmiAttrType DmiType,
dmiAttrMaxSize INTEGER,
dmiAttrEnumListCount INTEGER,
dmiAttrDescrLength INTEGER
}
dmiAttrId OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The value of the 'id' statement from the
attribute definition. This value uniquely
identifies this attribute within the group. "
::= { dmiAttributeEntry 1 }
dmiAttrName OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The value of the 'name' statement from the
attribute definition. This name is normally used
for display to human users."
::= { dmiAttributeEntry 2 }
dmiAttrAccess OBJECT-TYPE
-- SYNTAX DmiAccess
SYNTAX INTEGER { -- matches DMI encodings
unknown(1), -- MIF database error
readOnly(2),
readWrite(3),
writeOnly(4),
unsupported(5)
}
ACCESS read-only
STATUS current
DESCRIPTION
"The value of the 'access' statement from the
attribute definition. This value defines how the
attribute may be accessed."
::= { dmiAttributeEntry 3 }
dmiAttrType OBJECT-TYPE
SYNTAX DmiType
ACCESS read-only
STATUS current
DESCRIPTION
"This is the value of the 'type' statement from
the attribute definition. This value specifies
the datatype of the attribute."
::= { dmiAttributeEntry 4 }
dmiAttrMaxSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS current
DESCRIPTION
"For string types, this value specifies the
maximum number of octets that may be contained in
the string.
Zero implies no limit specified (or a non-string
datatype)."
::= { dmiAttributeEntry 5 }
dmiAttrEnumListCount OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS current
DESCRIPTION
"The number of name-value pairs in any associated
enumeration list. Zero if not an enumerated
integer."
::= { dmiAttributeEntry 6 }
dmiAttrDescrLength OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"The total length (in octets) of the 'description
string' from the 'description' statement in the
group definition. This string can be retrieved
in segments from the dmiDescrTable"
::= { dmiAttributeEntry 7 }
--
-- Key Table
--
dmiKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiKeyEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of key definitions for each group that
has a 'key' statement."
::= { dmiClasses 3 }
dmiKeyEntry OBJECT-TYPE
SYNTAX DmiKeyEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table specifies an attribute
that is (part of) the 'key' for the corresponding
group. "
INDEX { dmiClassIndex, dmiKeyIndex }
::= { dmiKeyTable 1 }
DmiKeyEntry ::= SEQUENCE {
dmiKeyIndex INTEGER,
dmiKeyType DmiType,
dmiKeyAttrId Unsigned32
}
dmiKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..127)
ACCESS read-only
STATUS current
DESCRIPTION
"An ordinal that indicates this attributes
position in the key for this group."
::= { dmiKeyEntry 1 }
dmiKeyType OBJECT-TYPE
SYNTAX DmiType
ACCESS read-only
STATUS current
DESCRIPTION
"The type of the attribute that forms this portion
of the group key."
::= { dmiKeyEntry 2 }
dmiKeyAttrId OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The Id of the attribute that forms this portion
of the group key."
::= { dmiKeyEntry 3 }
--
--Description Table
--
dmiDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiDescrEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of description string segments. This
table allows long description strings to be
retrieved in segments.
A complete description string can be reconstituted
by concatenating the ordered set of string
segments. The length of the complete string is
available through the dmiClassTable or
dmiAttributeTable as appropriate."
::= { dmiClasses 4 }
dmiDescrEntry OBJECT-TYPE
SYNTAX DmiDescrEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the description table contains one
segment of an attribute or group description.
The complete description string can be
reconstituted by concatenating the ordered set of
string segments. The length of the complete
string is available through the dmiClassTable or
dmiAttributeTable as appropriate.
The description string for the group definition is
accessed by specifying dmiAttrId==0"
INDEX { dmiClassIndex, dmiAttrId, dmiDescrIndex }
::= { dmiDescrTable 1 }
DmiDescrEntry ::= SEQUENCE {
dmiDescrIndex INTEGER,
dmiDescrText DmiString
}
dmiDescrIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"An ordinal that indicates this segment's relative
position in the complete description string for
this attribute or group."
::= { dmiDescrEntry 1 }
dmiDescrText OBJECT-TYPE
SYNTAX DmiString
ACCESS read-only
STATUS current
DESCRIPTION
"A segment of the description string for this
attribute or group."
::= { dmiDescrEntry 2 }
--
-- Enumeration Table
--
dmiEnumTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiEnumEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table defining all enumerated lists known to
the Service Layer."
::= { dmiClasses 5 }
dmiEnumEntry OBJECT-TYPE
SYNTAX DmiEnumEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table defines the pairing of a
string with an integer value as part of an 'Enum'
definition."
INDEX { dmiClassIndex, dmiAttrId, dmiEnumId }
::= { dmiEnumTable 1 }
DmiEnumEntry ::= SEQUENCE {
DmiEnumId Unsigned32,
dmiEnumValue Integer32,
dmiEnumString DmiString
}
dmiEnumId OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each entry within a particular
'Enum' definition."
::= { dmiEnumEntry 1 }
dmiEnumValue OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS current
DESCRIPTION
"The integer value that is associated with the
corresponding string (dmiEnumString)."
::= { dmiEnumEntry 2 }
dmiEnumString OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The displayable string that is associated with
the corresponding integer value (dmiEnumValue)"
::= { dmiEnumEntry 3 }
--
-- DMI Service Layer: Installed Components
--
--
-- Component Table
--
dmiComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiComponentEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all components registered with the
Service Layer."
::= { dmiComponents 1 }
dmiComponentEntry OBJECT-TYPE
SYNTAX DmiComponentEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describes a particular
component registered with the Service Layer"
INDEX { dmiCompId }
::= { dmiComponentTable 1 }
DmiComponentEntry ::= SEQUENCE {
dmiCompId Unsigned32,
dmiCompName DmiString,
dmiCompDescrLength INTEGER,
dmiCompGroupCount INTEGER,
dmiCompPragma DmiString
}
dmiCompId OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The unique Id assigned to the component by the
Service Layer at registration time. By
convention, the Service Layer itself will have an
Id of one."
::= { dmiComponentEntry 1 }
dmiCompName OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The value of the 'name' statement from the
component definition block."
::= { dmiComponentEntry 2 }
dmiCompDescrLength OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"The total length of the component description
string in octets."
::= { dmiComponentEntry 3 }
dmiCompGroupCount OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"The number of group instances contained within
this component."
::= { dmiComponentEntry 4 }
dmiCompPragma OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The value of the 'pragama' statement from the
component definition block."
::= { dmiComponentEntry 5 }
--
-- Component Description Table
--
dmiCompDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiCompDescrEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of description string segments. This
table allows long description strings to be
retrieved in segments.
A complete description string can be reconstituted
by concatenating the ordered set of string
segments. The length of the complete string is
available through the dmiComponentTable."
::= { dmiComponents 2 }
dmiCompDescrEntry OBJECT-TYPE
SYNTAX DmiCompDescrEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the description table contains one
segment of a component description.
The complete description string can be
reconstituted by concatenating the ordered set of
string segments. The length of the complete
string is available through the
dmiComponentTable."
INDEX { dmiCompId, dmiCompDescrIndex }
::= { dmiCompDescrTable 1 }
DmiCompDescrEntry ::= SEQUENCE {
dmiCompDescrIndex INTEGER,
dmiCompDescrText DmiString
}
dmiCompDescrIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"An ordinal that indicates this segment's relative
position in the complete description string for
this attribute or group."
::= { dmiCompDescrEntry 1 }
dmiCompDescrText OBJECT-TYPE
SYNTAX DmiString
ACCESS read-only
STATUS current
DESCRIPTION
"A segment of the description string for this
attribute or group."
::= { dmiCompDescrEntry 2 }
--
-- Group Table
--
dmiGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiGroupEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all group instances contained within
each component."
::= { dmiComponents 3 }
dmiGroupEntry OBJECT-TYPE
SYNTAX DmiGroupEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describes a particular
group instance within a particular component."
INDEX { dmiCompId, dmiGroupId }
::= { dmiGroupTable 1 }
DmiGroupEntry ::= SEQUENCE {
dmiGroupId Unsigned32,
dmiGroupClassString DmiString,
dmiGroupVersion INTEGER,
dmiGroupClassIndex Unsigned32
}
dmiGroupId OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"An identifier assigned by the DMI Service Layer
that uniquely identifies this group instance
within a particular component."
::= { dmiGroupEntry 1 }
dmiGroupClassString OBJECT-TYPE
SYNTAX DmiString (SIZE(0..255))
ACCESS read-only
STATUS current
DESCRIPTION
"The class string of the group (or table) instance
as registered with the DMI Service Layer for the
given component."
::= { dmiGroupEntry 2 }
dmiGroupVersion OBJECT-TYPE
SYNTAX INTEGER (0..999)
ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the group definition
providing it appeared as an integer in the 'class
string'; zero otherwise."
::= { dmiGroupEntry 3 }
dmiGroupClassIndex OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS current
DESCRIPTION
"The index of the corresponding group class
definition in the dmiClassTable. This index is an
artifact of the mapping agent and serves as a
cross-reference into the dmiClassTable for the
remainder of the group class definition."
::= { dmiGroupEntry 4 }
--
-- DMI Language Table
--
dmiLanguageTable OBJECT-TYPE
SYNTAX SEQUENCE OF DmiLanguageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all language bindings registered for
each component."
::= { dmiComponents 4 }
dmiLanguageEntry OBJECT-TYPE
SYNTAX DmiLanguageEntry
ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describes a particular
language binding within a particular component."
INDEX { dmiCompId, IMPLIED dmiLanguage }
::= { dmiLanguageTable 1 }
DmiLanguageEntry ::= SEQUENCE {
dmiLanguage DmiString
}
dmiLanguage OBJECT-TYPE
SYNTAX DmiString (SIZE(16|14))
ACCESS read-only
STATUS current
DESCRIPTION
"The language string, defined by the DMI 2.0
Specification, that identifies a native language
character set supported by the component.
The format of the string is:
'language-code|territory-code|encoding'
where language-code is one of the two-letter codes
defined in ISO 639, territory-code is one of the
two leteter codes defined in ISO 3166, and
encoding is either 'iso8859-1' or 'unicode'."
::= { dmiLanguageEntry 1 }
--
-- DMI-to-SNMP Mapping Agent capabilities
--
dmiMappingLevel OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"The mapping level identifies the capabilities
supported by the DMI-to-SNMP mapping agent. This
object is defined as a bit-mask where each bit
corresponds to a specific mapping capability. If
the bit is '1', the capability is supported by the
mapping agent. If the bit is '0', the capability
is not supported. The mapping capabilities defined
are:
0x01 Event Mapping Supported
0x02 Request/Response Mapping Supported
0x04 Row Addition/Deletion Supported
0x08 Remote Proxy Supported
0x10 Dynamic OID Generation Supported
All other (unused) bits must be '0'.
For example, a mapping agent that supports Event
and Request/Response mapping, including Dynamic
OID Generation, but does not support row
addition/deletion nor remote proxy returns the
value 0x13."
::= { dmiMappingAgent 1 }
--
-- DMI Indication Definitions
--
--
-- Varbinds used in DMI Event Indications
--
dmiEventType OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"Event-specific information that identifies the
type of event within the DMI Event Generation
group.
Normally, this information is conveyed in the
resulting SNMP Notification OID derived from the
DMI Event to SNMP Trap mapping procedure. This
object is not included in event specific traps.
However, this object is defined for use within the
generic dmiEventIndication trap, when mapping the
DMI event to a specific SNMP trap is not possible
(e.g., the DMI Class to SNMP OID mapping is not
defined)."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.1'
class = 'EventGeneration|<specific name>|001'
name = 'Event System', ID = 1"
::= { dmiEventVars 1 }
dmiEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
monitor(1),
information(2),
ok(4),
nonCritical(8),
critical(16),
nonRecoverable(32)
}
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"The severity of this event."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.2'
class = 'EventGeneration|<specific name>|001'
name = 'Event Severity', ID = 2"
::= { dmiEventVars 2 }
-- { dmiEventVars 3 } is not used.
dmiEventStateKey OBJECT-TYPE
SYNTAX Integer32
-- ACCESS read-only --accessible-for-notify
ACCESS read-only
STATUS current
DESCRIPTION
"The index into the Event State group for the
component generating this event, provided the
event is state-based. The value -1 indicates the
event is not state-based."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.3&4'
class = 'EventGeneration|<specific name>|001'
name = 'Event Is State-Based', ID = 3; and
name = 'Event State Key', ID = 4"
::= { dmiEventVars 4 }
dmiEventAssociatedGroup OBJECT-TYPE
SYNTAX DmiString
-- ACCESS read-only --accessible-for-notify
ACCESS read-only
STATUS current
DESCRIPTION
"The class string of the DMI group associated with
this event."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.5'
class = 'EventGeneration|<specific name>|001'
name = 'Associated Group', ID = 5"
::= { dmiEventVars 5 }
dmiEventSystem OBJECT-TYPE
SYNTAX Integer32
-- ACCESS read-only --accessible-for-notify
ACCESS read-only
STATUS current
DESCRIPTION
"Event-specific information that identifies the
functional system of the component that caused the
event.
Normally, SNMP Traps mapped from a DMI Event
contain an event-specific definition of this
attribute. This object is not included in event
specific traps.
However, this object is defined for use within the
generic dmiEventIndication trap, when mapping the
DMI event to a specific SNMP trap is not possible
(e.g., the DMI Class to SNMP OID mapping is not
defined)."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.6'
class = 'EventGeneration|<specific name>|001'
name = 'Event System', ID = 6"
::= { dmiEventVars 6 }
dmiEventSubSystem OBJECT-TYPE
SYNTAX Integer32
-- ACCESS read-only --accessible-for-notify
ACCESS read-only
STATUS current
DESCRIPTION
"Event-specific information that identifies the
functional sub-system of the component that caused
the event.
Normally, SNMP Traps mapped from a DMI Event
contain an event-specific definition of this
attribute. This object is not included in event
specific traps.
However, this object is defined for use within the
generic dmiEventIndication trap, when mapping the
DMI event to a specific SNMP trap is not possible
(e.g., the DMI Class to SNMP OID mapping is not
defined)."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.2.7'
class = 'EventGeneration|<specific name>|001'
name = 'Event Subsystem', ID = 7"
::= { dmiEventVars 7 }
dmiEventSolution OBJECT-TYPE
SYNTAX Integer32
-- ACCESS read-only --accessible-for-notify
ACCESS read-only
STATUS current
DESCRIPTION
"Event-specific information that describes the
solution to the problem that caused the event.
Typically, SNMP Traps mapped from a DMI Event
contain an event-specific definition of this
attribute. This object is not included in event
specific traps.
However, this object is defined for use within the
generic dmiEventIndication trap, when mapping the
DMI event to a specific SNMP trap is not possible
(e.g., the DMI Class to SNMP OID mapping is not
defined)."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.3.1'
class = 'EventGeneration|<specific name>|001'
name = 'Event Solution', ID = 8"
::= { dmiEventVars 8 }
-- { dmiEventVars 9 } is unused
dmiEventVendorMsg OBJECT-TYPE
SYNTAX DmiString
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"Vendor specific message related to the event.
This data may contain any displayable string (ISO
8859-1)."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.3.3'
class = 'EventGeneration|<specific name>|001'
name = Event Message', ID = 10"
::= { dmiEventVars 10 }
dmiEventVendorData OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"Vendor specific data related to the event. This
data may contain any arbitrary string of octets."
REFERENCE
"DMTF DMI 2.0 Specification, Section 3.2.2.3.4'
class = 'EventGeneration|<specific name>|001'
name = Vendor Specific Data', ID = 11"
::= { dmiEventVars 11 }
dmiEventDateTime OBJECT-TYPE
-- SYNTAX Dmi_Date
SYNTAX OCTET STRING (SIZE (25))
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"The timestamp attached to an event indication by
the DMI Service Layer."
::= { dmiEventVars 12 }
dmiEventClassString OBJECT-TYPE
SYNTAX DmiString
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"The Event Group class string used, along with the
event type, to uniquely identify the DMI Event
when translated into the general
dmiEventIndication trap format."
::= { dmiEventVars 13 }
dmiEventSource OBJECT-TYPE
SYNTAX DmiTDAddress
ACCESS read-only --accessible-for-notify
STATUS current
DESCRIPTION
"The transport address that identifies the
originator of the DMI Event or Indication. The
event may be forwarded by other Service Layers
acting as intermediaries for the originator of the
event, or the event may have originated on a
system other than the local mapping agent.
This variable binding is only included in DMI
Events and Indications if the original source is a
system other than where the SNMP/DMI mapping agent
is operating.
If the transport selector (e.g., UDP port or IPX
socket) of an SNMP mapping agent running on the
specified system is not known, a zero (0) value is
to indicate that only the network address portion
is known. Otherwise, the transport selector value
may be used by management applications to send
SNMP requests directly to the specified system."
::= { dmiEventVars 14 }
--
-- Standard DMI Indications
--
dmiEventIndication TRAP-TYPE
ENTERPRISE dmiIndications
VARIABLES
{
dmiEventClassString, dmiEventType,
dmiEventDateTime, dmiCompId,
dmiEventSeverity, dmiEventStateKey,
dmiEventAssociatedGroup, dmiEventSystem,
dmiEventSubSystem }
-- STATUS current
DESCRIPTION
"A DMI Event associated with a group within a DMI
component has occurred.
Normally, DMI Events are translated into event
specific SNMP notifications instead of this
generic notification.
However, this generic notification is defined for
cases when mapping the DMI event to a specific
SNMP trap is not possible (e.g., the DMI Class to
SNMP OID mapping is not defined)."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.1'
-- DmiDeliverEvent() indication"
--::= { dmiIndications 1 }
::= 1
dmiComponentAddedIndication TRAP-TYPE
VARIABLES {
dmiCompId,
dmiCompName }
-- STATUS current
DESCRIPTION
"A new component has been installed into the DMI
Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.2'
-- DmiComponentAdded indication"
--::= { dmiIndications 2 }
::= 2
dmiComponentDeletedIndication TRAP-TYPE
VARIABLES { dmiCompId }
-- STATUS current
DESCRIPTION
"An installed component has been uninstalled from
the DMI Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.3'
-- DmiComponentDeleted indication"
--::= { dmiIndications 3 }
::= 3
dmiLanguageAddedIndication TRAP-TYPE
VARIABLES {
dmiCompId,
dmiLanguage }
-- STATUS current
DESCRIPTION
"A new language binding has been added to a
component in the DMI Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.4'
-- DmiLanguageAdded) indication"
--::= { dmiIndications 4 }
::= 4
dmiLanguageDeletedIndication TRAP-TYPE
VARIABLES {
dmiCompId,
dmiLanguage }
-- STATUS current
DESCRIPTION
"An existing language binding has been removed
from a component in the DMI Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.5'
-- DmiLanguageDeleted indication"
--::= { dmiIndications 5 }
::= 5
dmiGroupAddedIndication TRAP-TYPE
VARIABLES {
dmiCompId,
dmiGroupId,
dmiGroupClassString }
-- STATUS current
DESCRIPTION
"A new group has been added to a component in the
DMI Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.6'
-- DmiGroupAdded indication"
--::= { dmiIndications 6 }
::= 6
dmiGroupDeletedIndication TRAP-TYPE
VARIABLES {
dmiCompId,
dmiGroupId }
-- STATUS current
DESCRIPTION
"An existing group has been removed from a
component in the DMI Service Layer."
-- REFERENCE
-- "DMTF DMI 2.0 Specification, Section 7.1.7'
-- DmiGroupDeleted indication"
--::= { dmiIndications 7 }
::= 7
--
-- MIB Conformance Information
--
-- units of conformance
dmiClassesGroup OBJECT IDENTIFIER ::= {dmiMIBGroups 1 }
dmiComponentsGroup OBJECT IDENTIFIER ::= {dmiMIBGroups 2 }
dmiNotificationObjectGroup OBJECT IDENTIFIER ::= {dmiMIBGroups 3 }
dmiMappingAgentGroup OBJECT IDENTIFIER ::= {dmiMIBGroups 4 }
dmiNotificationsGroup TRAP-TYPE
ENTERPRISE dmiNotificationGroups
VARIABLES {
-- dmiEventIndication is conditional
dmiComponentAddedIndication,
dmiComponentDeletedIndication,
dmiLanguageAddedIndication,
dmiLanguageDeletedIndication,
dmiGroupAddedIndication,
dmiGroupDeletedIndication }
-- STATUS current
DESCRIPTION
"The notifications that an SNMP entity is
required to implement."
--::= {dmiNotificationGroups 1 }
::= 1
--
-- compliance statements
--
dmiMIBCompliance OBJECT IDENTIFIER
::= { dmiMIBConformance 1 }
dmiNotificationsOnlyCompliance OBJECT IDENTIFIER
::= { dmiMIBConformance 2 }
END
Reference in New Issue View Git Blame Copy Permalink