MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/atmf.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2635 lines
43 KiB
Plaintext
Executable File
Raw Blame History

ATM-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, IpAddress
FROM RFC1155-SMI
-- NsapAddress --
-- FROM SNMPv2-SMI --
TRAP-TYPE
FROM RFC-1215
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
-- a subtree for defining administrative
-- object identifiers
atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 }
-- a subtree for defining UNI MIB object types
atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 }
-- Textual Conventions
-- All representations of ATM addresses in this MIB Module use
-- the data type:
-- AtmAddress ::= OCTET STRING (SIZE (0 .. 32))
AtmAddress ::= OCTET STRING (SIZE (8 | 20) )
-- AtmAddress ::= OCTET STRING (SIZE (20) )
-- Note this data type is used only by the deprecated object
-- atmfPortAddress. Another definition (a refined one) is
-- specified in the separate MIB for Address Registration.
-- Object Identifier definitions
-- The following values are defined for use as possible values
-- of the atmfPortTransmissionType object.
atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 }
-- unknown transmission type
atmfUnknownType OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1}
-- Sonet STS-3c physical layer at 155.52 Mbps
atmfSonetSTS3c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 }
-- DS3 physical layer at 44.736 Mbps
atmfDs3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 }
-- 4B/5B encoding physical layer at 100 Mbps
atmf4B5B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 }
-- 8B/10B encoding physical layer at 155.52 Mbps
atmf8B10B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 }
-- The following values are defined for use as possible values
-- of the atmfPortMediaType object.
atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 }
-- unknown media type
atmfMediaUnknownType OBJECT IDENTIFIER ::= { atmfMediaTypes 1 }
-- Coaxial cable
atmfMediaCoaxCable OBJECT IDENTIFIER ::= { atmfMediaTypes 2 }
-- Single Mode fiber
atmfMediaSingleMode OBJECT IDENTIFIER ::= { atmfMediaTypes 3 }
-- Multi Mode fiber
atmfMediaMultiMode OBJECT IDENTIFIER ::= { atmfMediaTypes 4 }
-- Shielded Twisted Pair
atmfMediaStp OBJECT IDENTIFIER ::= { atmfMediaTypes 5 }
-- Unshielded Twisted Pair
atmfMediaUtp OBJECT IDENTIFIER ::= { atmfMediaTypes 6 }
-- The following values are defined for use as possible values
-- of the atmfVpcTransmitTrafficDescriptorType,
-- atmfVpcReceiveTrafficDescriptorType,
-- atmfVccTransmitTrafficDescriptorType and
-- atmfVccReceiveTrafficDescriptorType objects.
atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 }
-- The "None" Traffic Descriptor Type
atmfNoDescriptor OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 }
--
atmfPeakRate OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 }
-- This type is no longer used
--
-- The No CLP/No SCR Type
atmfNoClpNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameters #2, #3, #4 and #5 are unused
--
-- The CLP without Tagging/No SCR Type
atmfClpNoTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for CLP=0 traffic
-- Parameters #3, #4 and #5 are unused
--
-- The CLP with Tagging/No SCR Type
atmfClpTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for
-- CLP=0 traffic, excess tagged as CLP=1
-- Parameters #3, #4 and #5 are unused
--
-- The SCR/No CLP Type
atmfNoClpScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
--
-- The CLP without Tagging/SCR Type
atmfClpNoTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
--
-- The CLP with Tagging/SCR Type
atmfClpTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0
-- traffic, excess tagged as CLP=1
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
-- The MIB groups
atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 }
atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 }
atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 }
atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 }
atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 }
-- The Physical Port Group
-- This group is mandatory for all UNI devices.
--
-- The Physical Port Table
atmfPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of physical layer status and parameter information
for the UNI's physical interface."
::= { atmfPhysicalGroup 1 }
atmfPortEntry OBJECT-TYPE
SYNTAX AtmfPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about the
physical layer of a UNI interface."
INDEX { atmfPortIndex }
::= { atmfPortTable 1 }
AtmfPortEntry ::=
SEQUENCE {
atmfPortIndex INTEGER,
atmfPortAddress AtmAddress,
atmfPortTransmissionType OBJECT IDENTIFIER,
atmfPortMediaType OBJECT IDENTIFIER,
atmfPortOperStatus INTEGER,
atmfPortSpecific OBJECT IDENTIFIER,
atmfPortMyIfName DisplayString }
atmfPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value which identifies this port. The value of 0
has the special meaning of identifying the local UNI."
::= { atmfPortEntry 1 }
atmfPortAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required
for backward compatibility with version 2.0 of the UNI
specification. The Address Group, defined as part of the
separate Address Registration MIB should be used instead."
::= { atmfPortEntry 2 }
atmfPortTransmissionType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The transmission type of this port. For example, for a port
using the Sonet STS-3c physical layer at 155.52 Mbs, this
object would have the Object Identifier value: atmfSonetSTS3c."
::= { atmfPortEntry 3 }
atmfPortMediaType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of media being used on this port. For example, for
a port using coaxial cable, this object would have the Object
Identifier value: atmfMediaCoaxCable."
::= { atmfPortEntry 4 }
atmfPortOperStatus OBJECT-TYPE
SYNTAX INTEGER { other(1), inService(2), outOfService(3), loopBack(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational (i.e., actual) state of this port. The ILMI
should not alarm on a physical interface for when the value
of this object is outOfService(3). This capability is useful
if equipment is to be disconnected, or for troubleshooting
purposes. A value of loopBack(4) indicates that a local
loopback is in place. "
::= { atmfPortEntry 5 }
atmfPortSpecific OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object `points' to additional transmission and/or media
specific information relating to this port. In particular,
this object's value is the name of a specific instance of the
first columnar object of a MIB table with such additional
information, where the specific instance is the one which
corresponds to this port. For example, for a DS3 interface,
this object would contain the value, as defined in RFC 1407:
dsx3LineIndex.i where i would be the integer value uniquely
identifying the DS3 interface corresponding to this port.
If no additional transmission and/or media specific
information is available, this object has the value { 0 0 }."
::= { atmfPortEntry 6 }
atmfPortMyIfName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual name of this interface. If this system is
manageable through SNMP, and supports the object ifName,
the value of this object must be identical with that of
ifName for the ifEntry of the lowest level physical interface
for this port. This interface must be uniquely named on this
system to distinguish parallel links with a neighboring
system. If this interface does not have a textual name, the
value of this object is a zero length string."
::= { atmfPortEntry 7 }
-- Note: Typical UME will support only one of the following two objects
atmfMyIpNmAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An IP Address to which a Network Management Station can send
Network Management protocol, e.g. SNMP messages to UDP port
161, in order to access network management information
concerning the operation of the ATM device local to this UME."
::= { atmfPhysicalGroup 2 }
atmfMyOsiNmNsapAddress OBJECT-TYPE
SYNTAX NsapAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An NSAP Address to which a Network Management Station can
send Network Management protocol messages in order to access
network management information concerning the operation of
the ATM device local to this UME."
::= { atmfPhysicalGroup 3 }
-- The ATM Layer Group
-- This group is mandatory for all UNI devices.
--
-- ATM-layer specific information for the UNI interface
atmfAtmLayerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAtmLayerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ATM layer status and parameter information for
the UNI's physical interface."
::= { atmfAtmLayerGroup 1 }
atmfAtmLayerEntry OBJECT-TYPE
SYNTAX AtmfAtmLayerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about the ATM
layer of a UNI interface."
INDEX { atmfAtmLayerIndex }
::= { atmfAtmLayerTable 1 }
AtmfAtmLayerEntry ::=
SEQUENCE {
atmfAtmLayerIndex INTEGER,
atmfAtmLayerMaxVPCs INTEGER,
atmfAtmLayerMaxVCCs INTEGER,
atmfAtmLayerConfiguredVPCs INTEGER,
atmfAtmLayerConfiguredVCCs INTEGER,
atmfAtmLayerMaxVpiBits INTEGER,
atmfAtmLayerMaxVciBits INTEGER,
atmfAtmLayerUniType INTEGER,
atmfAtmLayerUniVersion INTEGER }
atmfAtmLayerIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of
0 has the special meaning of identifying the local UNI."
::= { atmfAtmLayerEntry 1 }
atmfAtmLayerMaxVPCs OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of switched and permanent VPCs supported
on this UNI."
::= { atmfAtmLayerEntry 2 }
atmfAtmLayerMaxVCCs OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of switched and permanent VCCs supported
on this UNI."
::= { atmfAtmLayerEntry 3 }
atmfAtmLayerConfiguredVPCs OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of permanent VPCs configured for use on this UNI."
::= { atmfAtmLayerEntry 4 }
atmfAtmLayerConfiguredVCCs OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of permanent VCCs configured for use on this UNI."
::= { atmfAtmLayerEntry 5 }
atmfAtmLayerMaxVpiBits OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active VPI bits on this interface."
::= {atmfAtmLayerEntry 6 }
atmfAtmLayerMaxVciBits OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active VCI bits on this interface."
::= {atmfAtmLayerEntry 7 }
atmfAtmLayerUniType OBJECT-TYPE
SYNTAX INTEGER {public(1), private(2)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the ATM UNI, either public or private."
::= { atmfAtmLayerEntry 8 }
atmfAtmLayerUniVersion OBJECT-TYPE
SYNTAX INTEGER {version2point0(1), version3point0(2), version3point1(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of the latest version of the ATM Forum UNI
Specification that is supported on this UNI. If this value is
not present, a version of the UNI earlier than 3.1 is
supported. If a value greater than version3point1 is present,
then UNI 3.1 communication should be attempted. If the peer
UME's value of this object is the same as, or later than the
local UME's value, then the version corresponding to the local
UME's value should be attempted. Otherwise, if the peer UME's
value of this object is earlier, and supported locally, then
the local UME should attempt the version corresponding to the
peer UME's value. Otherwise, compatability of the two UMEs
cannot be assumed."
::= { atmfAtmLayerEntry 9 }
-- The ATM Statistics Group
-- This group is optional. However, if any objects in this group
-- are supported, then all objects in the group must be supported.
--
-- ATM-layer statistics for the UNI interface
atmfAtmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAtmStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ATM layer statistics information for the UNI's
physical interface."
::= { atmfAtmStatsGroup 1 }
atmfAtmStatsEntry OBJECT-TYPE
SYNTAX AtmfAtmStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing statistics for the ATM
layer of a UNI interface."
INDEX { atmfAtmStatsIndex }
::= { atmfAtmStatsTable 1 }
AtmfAtmStatsEntry ::=
SEQUENCE {
atmfAtmStatsIndex INTEGER,
atmfAtmStatsReceivedCells Counter,
atmfAtmStatsDroppedReceivedCells Counter,
atmfAtmStatsTransmittedCells Counter }
atmfAtmStatsIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of
0 has the special meaning of identifying the local UNI."
::= { atmfAtmStatsEntry 1 }
atmfAtmStatsReceivedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of ATM cells received on this UNI
which were assigned and not dropped."
::= { atmfAtmStatsEntry 2 }
atmfAtmStatsDroppedReceivedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of ATM cells which were dropped for
the reasons defined in section 4.4.4.2."
::= { atmfAtmStatsEntry 3 }
atmfAtmStatsTransmittedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of assigned ATM cells which were
transmitted across this interface."
::= { atmfAtmStatsEntry 4 }
-- The Virtual Path Group
-- This group is mandatory for all UNI devices.
--
-- Information concerning Virtual Path Connections
atmfVpcTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfVpcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of status and parameter information on the virtual
path connections which cross this UNI. There is one entry in
this table for each permanent virtual path connection."
::= { atmfVpcGroup 1 }
atmfVpcEntry OBJECT-TYPE
SYNTAX AtmfVpcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about a
particular virtual path connection."
INDEX { atmfVpcPortIndex, atmfVpcVpi }
::= { atmfVpcTable 1 }
AtmfVpcEntry ::=
SEQUENCE {
atmfVpcPortIndex INTEGER,
atmfVpcVpi INTEGER,
atmfVpcOperStatus INTEGER,
atmfVpcTransmitTrafficDescriptorType OBJECT IDENTIFIER,
atmfVpcTransmitTrafficDescriptorParam1 INTEGER,
atmfVpcTransmitTrafficDescriptorParam2 INTEGER,
atmfVpcTransmitTrafficDescriptorParam3 INTEGER,
atmfVpcTransmitTrafficDescriptorParam4 INTEGER,
atmfVpcTransmitTrafficDescriptorParam5 INTEGER,
atmfVpcReceiveTrafficDescriptorType OBJECT IDENTIFIER,
atmfVpcReceiveTrafficDescriptorParam1 INTEGER,
atmfVpcReceiveTrafficDescriptorParam2 INTEGER,
atmfVpcReceiveTrafficDescriptorParam3 INTEGER,
atmfVpcReceiveTrafficDescriptorParam4 INTEGER,
atmfVpcReceiveTrafficDescriptorParam5 INTEGER,
atmfVpcQoSCategory INTEGER,
atmfVpcTransmitQoSClass INTEGER,
atmfVpcReceiveQoSClass INTEGER }
atmfVpcPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of
0 has the special meaning of identifying the local UNI."
::= { atmfVpcEntry 1 }
atmfVpcVpi OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VPI value of this Virtual Path Connection at the local
UNI."
::= { atmfVpcEntry 2 }
atmfVpcOperStatus OBJECT-TYPE
SYNTAX INTEGER { unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present actual operational status of the VPC.
A value of end2endUp(2) or end2endDown(3) would be used if
the end-to-end status is known. If only local status
information is available, a value of localUpEnd2endUnknown(4)
or localDown(5) would be used."
::= { atmfVpcEntry 3 }
atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the transmit
direction of this VPC. The type may indicate none, or a type
with one or more parameters. These parameters are specified
as a parameter vector, in the corresponding instances of the
objects:
atmfVpcTransmitTrafficDescriptorParam1,
atmfVpcTransmitTrafficDescriptorParam2,
atmfVpcTransmitTrafficDescriptorParam3,
atmfVpcTransmitTrafficDescriptorParam4, and
atmfVpcTransmitTrafficDescriptorParam5."
::= { atmfVpcEntry 4 }
atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the transmit parameter vector for
this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 5 }
atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the transmit parameter vector for
this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 6 }
atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the transmit parameter vector for
this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 7 }
atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the transmit parameter vector for
this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 8 }
atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the transmit parameter vector for
this VPC, used according to the value of
atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 9 }
atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the traffic
in the receive direction of this VPC. The type may indicate
none, or a type with one or more parameters. These parameters
are specified as a parameter vector, in the corresponding
instances of the objects:
atmfVpcReceiveTrafficDescriptorParam1,
atmfVpcReceiveTrafficDescriptorParam2,
atmfVpcReceiveTrafficDescriptorParam3,
atmfVpcReceiveTrafficDescriptorParam4, and
atmfVpcReceiveTrafficDescriptorParam5."
::= { atmfVpcEntry 10 }
atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the receive parameter vector for
this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 11 }
atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the receive parameter vector for
this VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 12 }
atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the receive parameter vector for this
VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 13 }
atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the receive parameter vector for this
VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 14 }
atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the receive parameter vector for this
VPC, used according to the value of
atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 15 }
atmfVpcQoSCategory OBJECT-TYPE
SYNTAX INTEGER { other(1), deterministic (2), statistical (3), unspecified (4) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required for
backward compatibility with version 2.0 of the UNI
specification."
::= { atmfVpcEntry 16 }
atmfVpcTransmitQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for
the transmit direction of this VPC connection at the local
UNI."
::= { atmfVpcEntry 17 }
atmfVpcReceiveQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for
the receive direction of this VPC connection at the local
UNI."
::= { atmfVpcEntry 18 }
-- The Virtual Channel Group
-- This group is mandatory for all UNI devices.
--
-- Information concerning Virtual Channel Connections
atmfVccTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of status and parameter information on the virtual
channel connections which are visible at this UNI. There is
one entry in this table for each permanent virtual channel
connection, including reserved VCCs that are supported; e.g.,
signalling, OAM flows, and ILMI, but not unassigned cells."
::= { atmfVccGroup 1 }
atmfVccEntry OBJECT-TYPE
SYNTAX AtmfVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about a
particular virtual channel connection."
INDEX { atmfVccPortIndex, atmfVccVpi, atmfVccVci }
::= { atmfVccTable 1 }
AtmfVccEntry ::=
SEQUENCE {
atmfVccPortIndex INTEGER,
atmfVccVpi INTEGER,
atmfVccVci INTEGER,
atmfVccOperStatus INTEGER,
atmfVccTransmitTrafficDescriptorType OBJECT IDENTIFIER,
atmfVccTransmitTrafficDescriptorParam1 INTEGER,
atmfVccTransmitTrafficDescriptorParam2 INTEGER,
atmfVccTransmitTrafficDescriptorParam3 INTEGER,
atmfVccTransmitTrafficDescriptorParam4 INTEGER,
atmfVccTransmitTrafficDescriptorParam5 INTEGER,
atmfVccReceiveTrafficDescriptorType OBJECT IDENTIFIER,
atmfVccReceiveTrafficDescriptorParam1 INTEGER,
atmfVccReceiveTrafficDescriptorParam2 INTEGER,
atmfVccReceiveTrafficDescriptorParam3 INTEGER,
atmfVccReceiveTrafficDescriptorParam4 INTEGER,
atmfVccReceiveTrafficDescriptorParam5 INTEGER,
atmfVccQoSCategory INTEGER,
atmfVccTransmitQoSClass INTEGER,
atmfVccReceiveQoSClass INTEGER }
atmfVccPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of
0 has the special meaning of identifying the local UNI."
::= { atmfVccEntry 1 }
atmfVccVpi OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VPI value of this Virtual Channel Connection at the
local UNI."
::= { atmfVccEntry 2 }
atmfVccVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VCI value of this Virtual Channel Connection at the
local UNI."
::= { atmfVccEntry 3 }
atmfVccOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
end2endUp(2),
end2endDown(3),
localUpEnd2endUnknown(4),
localDown(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present actual operational status of the VCC. A value of
end2endUp(2) or end2endUp(3) is used if the end to end status
is known. If only local status is known a value of
localUpEnd2endUnknown(4) or localDown(5) is used."
::= { atmfVccEntry 4 }
atmfVccTransmitTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the transmit
direction of this VCC. The type may indicate none, or a type
with one or more parameters. These parameters are specified as
a parameter vector, in the corresponding instances of the
objects:
atmfVccTransmitTrafficDescriptorParam1,
atmfVccTransmitTrafficDescriptorParam2,
atmfVccTransmitTrafficDescriptorParam3,
atmfVccTransmitTrafficDescriptorParam4, and
atmfVccTransmitTrafficDescriptorParam5."
::= { atmfVccEntry 5 }
atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the transmit parameter vector for
this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 6 }
atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the transmit parameter vector for
this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 7 }
atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the transmit parameter vector for this
VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 8 }
atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the transmit parameter vector for
this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 9 }
atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the transmit parameter vector for
this VCC, used according to the value of
atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 10 }
atmfVccReceiveTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the traffic in
the receive direction of this VCC. The type may indicate none,
or a type with one or more parameters. These parameters are
specified as a parameter vector, in the corresponding
instances of the objects:
atmfVccReceiveTrafficDescriptorParam1,
atmfVccReceiveTrafficDescriptorParam2,
atmfVccReceiveTrafficDescriptorParam3,
atmfVccReceiveTrafficDescriptorParam4, and
atmfVccReceiveTrafficDescriptorParam5."
::= { atmfVccEntry 11 }
atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the receive parameter vector for this
VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 12 }
atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the receive parameter vector for this
VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 13 }
atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the receive parameter vector for this
VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 14 }
atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the receive parameter vector for this
VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 15 }
atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the receive parameter vector for this
VCC, used according to the value of
atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 16 }
atmfVccQoSCategory OBJECT-TYPE
SYNTAX INTEGER { other(1), deterministic (2), statistical (3), unspecified (4) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required for
backward compatibility with version 2.0 of the UNI
specification."
::= { atmfVccEntry 17 }
atmfVccTransmitQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the
transmit direction of this VCC connection at the local UNI."
::= { atmfVccEntry 18 }
atmfVccReceiveQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the
receive direction of this VCC connection at the local UNI."
::= { atmfVccEntry 19 }
atmfVpcChange TRAP-TYPE
ENTERPRISE atmForum
VARIABLES { atmfVpcPortIndex, atmfVpcVpi, atmfVpcOperStatus }
DESCRIPTION
"An atmfVpcChange trap indicates that a VPC is added or
deleted at this UNI. The variables included in the trap
identify the VPI value of the new or deleted configured
VPC at this UNI."
::= 1
atmfVccChange TRAP-TYPE
ENTERPRISE atmForum
VARIABLES { atmfVccPortIndex, atmfVccVci, atmfVccVpi, atmfVccOperStatus }
DESCRIPTION
"An atmfVccChange trap indicates that a VCC is added or
deleted at this UNI. The variables included in the trap
identify the VCI and VPI values of the new or deleted
configured VCC at this UNI."
::= 2
-- Textual Convention
-- Representation in this MIB Module of an ATM address
-- use the data type:
-- Representation in this MIB Module of a network-prefix
-- for an ATM address use the data type:
NetPrefix ::= OCTET STRING (SIZE(8 | 13))
-- NetPrefix ::= OCTET STRING (SIZE (13))
-- in both the AtmAddress and NetPrefix conventions, non-NSAP-encoded E.164
-- addresses are represented as 8 octets using the format specified in
-- section 5.1.3.1.4. In contrast, an NSAP-encoded address is 20 octets, and
-- an NSAP-encoded network prefix is 13 octets long.
-- New MIB Groups
atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 }
atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 }
-- The Network Prefix Table
-- The Netwotk Preifx Table is implemented by the UNI management Entity on
-- the user-side of the UNI
atmfNetPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemnted by the UNI Management Entity on the user-
side of an ATM UNI port, containing the network-prefix(es) for
ATM-layer addresses in effect in the user-side if the UNI."
::= { atmfNetPrefixGroup 1 }
atmfNetPrefixEntry OBJECT-TYPE
SYNTAX AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single network-prefix for ATM-layer
address in effect on the user-side of a UNI port. Note that
the index variable atmfNetPrefixPrefix is a variable-length
string, and as such the rule for variable-length strings in
section 4.1.6 of RFC 1212 applies."
INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix }
::= { atmfNetPrefixTable 1 }
AtmfNetPrefixEntry ::=
SEQUENCE {
atmfNetPrefixPort INTEGER,
atmfNetPrefixPrefix NetPrefix,
atmfNetPrefixStatus INTEGER }
atmfNetPrefixPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value which identies the UNI port for which the
network prefix for ATM address is in effect. The value of 0
has the special meaning of identifying the local UNI."
::= { atmfNetPrefixEntry 1 }
atmfNetPrefixPrefix OBJECT-TYPE
SYNTAX NetPrefix
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The network prefix for ATM address which is in effect on the
user side of the ATM UNI port."
::= { atmfNetPrefixEntry 2 }
atmfNetPrefixStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), invalid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of the validity of the network prefix for ATM
addresses on the user-side of the UNI port. To configure a new
network prefix in this table, the network-side must set the
appropriate instance of this object to the value valid(1).
To delete an existing network prefix in this table, the
network-side must set the appropriate instance of this object
to the value of invalid(2).
If circumstances occur on the user-side which cause a prefix
to become invalid, the user-side modifies the value of the
appropriate instance of this object to invalid(2).
Whenever the value of this object for a particular prefix
becomes invalid(2), the conceptual row for that prefix may be
removed from the table at any time, either immidiately or
subsequently"
::= { atmfNetPrefixEntry 3 }
-- The Address Table
--
-- The Address Table is implemented by the UNI Management Entity
-- on the network-side of the UNI
atmfAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemented by the network-side of an ATM UNI port,containing
the ATM-layer addresses in effect on the user-side of the UNI."
::= { atmfAddressGroup 1 }
atmfAddressEntry OBJECT-TYPE
SYNTAX AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single ATM-layer address in effect on the user_side
of a UNI port. Note that the index variable atmfAddressAtmAddress is a
variable-length string, and as such the rule for variable-length strings
in section 4.1.6 of RFC 1212 applies."
INDEX { atmfAddressPort, atmfAddressAtmAddress }
::= { atmfAddressTable 1 }
AtmfAddressEntry ::= SEQUENCE {
atmfAddressPort INTEGER,
atmfAddressAtmAddress AtmAddress,
atmfAddressStatus INTEGER
}
atmfAddressPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for which the ATM address is
in effect. The value of 0 has the special meaning of identifying the local
UNI."
::= { atmfAddressEntry 1 }
atmfAddressAtmAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ATM address which is in effect on the user-side of the ATM UNI port."
::= { atmfAddressEntry 2 }
atmfAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
::= { atmfAddressEntry 3 }
-- LANE Emulation Version 1.0
-- New MIB Groups
atmfSrvcRegistryGroup OBJECT IDENTIFIER ::= { atmForumUni 8 }
-- Object Identifier definitions
--
-- The following values are defined for use as possible values
-- of the atmfSrvcRegServiceID object.
atmfSrvcRegTypes OBJECT IDENTIFIER ::= { atmForumAdmin 5 }
-- LAN Emulation configuration Server (LECS)
atmfSrvcRegLecs OBJECT IDENTIFIER ::= { atmfSrvcRegTypes 1 }
-- The Service Registry Table
--
-- The Service Registry Table is implemented by the network side
-- of the ATM UNI port
atmfSrvcRegTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfSrvcRegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table implemented by the UNI Management Entry on the
network side of the ATM UNI port contains all of the
services that are available to the user-side of the UNI
indexed by service identifier."
::= { atmfSrvcRegistryGroup 1 }
atmfSrvcRegEntry OBJECT-TYPE
SYNTAX AtmfSrvcRegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single service provider that is
available to the user-side of the ATM UNI port."
INDEX { atmfSrvcRegPort, atmfSrvcRegServiceID, atmfSrvcRegAddressIndex }
::= { atmfSrvcRegTable 1 }
AtmfSrvcRegEntry ::=
SEQUENCE {
atmfSrvcRegPort INTEGER,
atmfSrvcRegServiceID OBJECT IDENTIFIER,
atmfSrvcRegATMAddress AtmAddress,
atmfSrvcRegAddressIndex INTEGER
}
atmfSrvcRegPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for
which the service provider is available to the
user-side. The value of 0 has the special meaning
of identifying the local UNI."
::= { atmfSrvcRegEntry 1 }
atmfSrvcRegServiceID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the service identifier which uniquely identifies
the type of service at the address provided in the table."
::= { atmfSrvcRegEntry 2 }
atmfSrvcRegATMAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the full address of the service. The user-side
ATM UNI port may use this address to establish a connection
woth the service."
::= { atmfSrvcRegEntry 3 }
atmfSrvcRegAddressIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An arbitrary integer to differentiate multiple rows
containing different ATM address for the same service
on the same port."
::= { atmfSrvcRegEntry 4 }
END
Reference in New Issue View Git Blame Copy Permalink