MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/PCUBE-SE-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

4122 lines
133 KiB
Plaintext
Raw Blame History

-- ****
-- *------------------------------------------------------------------
-- * PCUBE-SE-MIB.my:Main SNMP MIB for Cisco SCE and SE.
-- *
-- * PCube was acquired by Cisco Systems on August 23, 2004
-- *
-- * Copyright (c) 2003-2005, 2006 by cisco Systems, Inc.
-- * All rights reserved.
-- * Author: Guy Keinan
-- *------------------------------------------------------------------
-- ****
PCUBE-SE-MIB DEFINITIONS ::= BEGIN
IMPORTS
pcubeWorkgroup, pcubeModules
FROM PCUBE-SMI
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, TimeTicks,
NOTIFICATION-TYPE,
Counter64,Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
pcubeSeMIB MODULE-IDENTITY
LAST-UPDATED "200611070000Z" -- Nov 7, 2006
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-sce@cisco.com"
DESCRIPTION
"Main SNMP MIB for Cisco's SCE OS products such as
SCE2000 and SE100. This MIB provides configuration and
runtime status for chassis, control modules, and line
modules on the SCOS systems."
REVISION "200611070000Z" -- Nov 7, 2006
DESCRIPTION
"- Increased the supported range of global
controllers (globalControllersIndex)
from (1..255) to (1..2147483647)
- Improved counter descriptions to reflect the counted
layer for the following byte and bandwidth counters:
txQueuesBandwidth
txQueuesDroppedBytes
globalControllersBandwidth
globalControllersDroppedBytes
"
REVISION "200605100000Z" -- May 10, 2006
DESCRIPTION
"MIB revised as a part of integration into
Cisco SNMP MIB standard,
main changes:
changed contaces,
added OBJECT-GROUPs,
added MODULE-COMPLIANCE,
renamed with a prefix 'p' the following
tables/objects to avoid conflict with
existing Cisco MIbs:
moduleGrp,
moduleTable,
moduleIndex,
moduleType,
moduleNumTrafficProcessors,
moduleSlotNum,
moduleHwVersion,
moduleNumPorts,
moduleNumLinks,
moduleConnectionMode,
moduleSerialNumber,
moduleUpStreamAttackFilteringTime,
moduleUpStreamLastAttackFilteringTime,
moduleDownStreamAttackFilteringTime,
moduleDownStreamLastAttackFilteringTime,
moduleAttackObjectsClearTime ,
moduleAdminStatus,
moduleOperStatus,
chassisGrp
chassisSysType,
chassisPowerSupplyAlarm,
chassisFansAlarm,
chassisTempAlarm,
chassisVoltageAlarm,
chassisNumSlots,
chassisSlotConfig,
chassisPsuType,
chassisLineFeedAlarm,
portGrp,
portTable,
portModuleIndex,
portIndex,
portType,
portNumTxQueues,
portIfIndex,
portAdminSpeed,
portAdminDuplex,
portOperDuplex,
portLinkIndex,
portOperStatus
removed attackTypeTableClearTime counter,
renamed Pcube to Cisco and SE to SCE."
REVISION "200602120000Z" -- February 12, 2006
DESCRIPTION
"Updates of OS version 3.0.3:
added mplsVpnAutoLearning group containing
mplsVpnSoftwareCountersTable and added
mplsVpnTotalHWMappingsThresholdExceededTrap."
REVISION "200508160000Z" -- August 16, 2005
DESCRIPTION
"Updates of OS version 3.0.0:
added vas group containing vasServerTable and added
vasServerOpertionalStatusChangeTrap."
REVISION "200412120000Z" -- December 12, 2004
DESCRIPTION
"Updates of OS version 2.5.5:
added rdrFormatterCategoryNumReportsQueued to the
rdrFormatterCategoryTable in the RDR-formatter group,
added subscribersNumAnonymous and
subscribersNumWithSessions to subscriber info,Added
the group attackGrp, containing attackTypeTable."
REVISION "200407010000Z" -- July 1, 2004
DESCRIPTION
"Updates of OS version 2.5:
added tpServiceLoss to traffic processor group,
added droppedBytes to Tx-Queue and global controller,
added TpIpRanges to subscriber info,deprecated
telnetSession* traps, replaced by session* traps."
REVISION "200307020000Z"
DESCRIPTION
"Updates of OS version 1.5:
added entries to the tpTable,
added entries to the rdrFormatterGrp and
rdrFormatterDestTable,added entries to the portTable and
attack filter traps."
REVISION "200301050000Z"
DESCRIPTION
"OS version 1.5 updates."
::= { pcubeModules 3 }
pcubeSEObjs OBJECT IDENTIFIER ::= { pcubeWorkgroup 1 }
pcubeSeConformance OBJECT IDENTIFIER ::= { pcubeSeMIB 1 }
pcubeSeGroups OBJECT IDENTIFIER ::= { pcubeSeConformance 1 }
pcubeSeCompliances OBJECT IDENTIFIER ::= { pcubeSeConformance 2 }
-- SE-MIB Objects
systemGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 1 }
-- Added a prefix 'p' to chassis objects and module objects
-- in order to prevent conflicts with CISCO-STACK-MIB for 6K
-- appliances, since Rev "200603130000Z"
pchassisGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 2 }
pmoduleGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 3 }
linkGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 4 }
diskGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 5 }
rdrFormatterGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 6 }
loggerGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 7 }
subscribersGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 8 }
trafficProcessorGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 9 }
pportGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 10 }
txQueuesGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 11 }
globalControllersGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 12 }
applicationGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 13 }
trafficCountersGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 14 }
attackGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 15 }
vasTrafficForwardingGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 16 }
mplsVpnAutoLearnGrp OBJECT IDENTIFIER ::= { pcubeSEObjs 17 }
-- textual conventions
LinkModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The various modes of a link."
SYNTAX INTEGER {
other(1), -- none of the following
bypass(2), -- In Bypass mode the traffic is
-- forwarded from one port to the
-- other using an internal splitter.
forwarding(3), -- In forwarding mode the traffic is
-- forwarded through the internal
-- hardware and software modules
-- of the SCE.
cutoff(4), -- In Cutoff mode the traffic is
-- dropped by the SCE.
sniffing(5) -- In sniffing mode the traffic is
-- passed in the same manner as in
-- bypass mode, however a copy of the
-- traffic is made and analyzed
-- internally in the box.
}
-- the System group
sysOperationalStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
boot(2), -- the system is in boot process
operational(3), -- the system is operational
warning(4), -- the system is in Warning status
failure(5) -- the system is in Failure status
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the system."
::= { systemGrp 1 }
sysFailureRecovery OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
operational(2), -- the system should enter
-- after abnormal boot
-- an Operational mode
nonOperational(3) -- the system should enter
-- after abnormal boot
-- a Failure mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the system should enter a Failure mode
after abnormal boot."
::= { systemGrp 2 }
sysVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system version."
::= { systemGrp 3 }
-- the chassis group
pchassisSysType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
sce1000(2), -- SCE 1000
se100(3), -- SE 100
sce2000(4) -- SCE 2000
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis system type."
::= { pchassisGrp 1 }
pchassisPowerSupplyAlarm OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
off(2), -- the power supply to the
-- chassis is normal
on(3) -- the power supply to the
-- chassis is not normal,
-- probably one or more power
-- supplies are not functional.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the power supply to the chassis is normal.
If the status is not 'ok' it means that one or more
power supplies are not functional."
::= { pchassisGrp 2 }
pchassisFansAlarm OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
off(2), -- all fans are functional
on(3) -- one or more fans are not
-- functional
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if all the fans on the chassis are
functional."
::= { pchassisGrp 3 }
pchassisTempAlarm OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
off(2), -- temperature is within normal range
on(3) -- temperature is too high
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis temperature alarm status."
::= { pchassisGrp 4 }
pchassisVoltageAlarm OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
off(2), -- voltage level is within normal range
on(3) -- voltage level is too high
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis internal voltage alarm status.
If the alarm is 'on' it indicates that the
voltage level of one or more HW units is not
in the normal range."
::= { pchassisGrp 5 }
pchassisNumSlots OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of slots in the chassis
available for plug-in modules. This number
counts slots that are already occupied as well
as empty slots."
::= { pchassisGrp 6 }
pchassisSlotConfig OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of which slots in the chassis have
modules inserted. This is an integer value with
bits set to indicate configured modules.
It can be interpreted as a sum of f(x) as x goes
from 1 to the number of slots, where f(x) = 0
for no module inserted and f(x) = exp(2, x-1) for
a module inserted."
::= { pchassisGrp 7 }
pchassisPsuType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
ac(2),
dc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of the power supplies."
::= { pchassisGrp 8 }
pchassisLineFeedAlarm OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
off(2), -- the line feed to the
-- chassis is normal
on(3) -- the line feed to the chassis
-- is not normal,
-- probably one or more line
-- feeds are not connected
-- or has no power.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the line feed to the chassis is normal.
If the status is not 'ok' it means that one or more
line feeds are not connected or have no power."
::= { pchassisGrp 10 }
-- the module group
pmoduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of module entries. The number of entries is
the number of modules in the chassis."
::= { pmoduleGrp 1 }
pmoduleEntry OBJECT-TYPE
SYNTAX PmoduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about one module in the
chassis."
INDEX { pmoduleIndex }
::= { pmoduleTable 1 }
PmoduleEntry ::=
SEQUENCE {
pmoduleIndex Integer32,
pmoduleType INTEGER,
pmoduleNumTrafficProcessors Integer32,
pmoduleSlotNum Integer32,
pmoduleHwVersion SnmpAdminString,
pmoduleNumPorts Integer32,
pmoduleNumLinks Integer32,
pmoduleConnectionMode INTEGER,
pmoduleSerialNumber SnmpAdminString,
pmoduleUpStreamAttackFilteringTime TimeTicks,
pmoduleUpStreamLastAttackFilteringTime TimeTicks,
pmoduleDownStreamAttackFilteringTime TimeTicks,
pmoduleDownStreamLastAttackFilteringTime TimeTicks,
pmoduleAttackObjectsClearTime TimeTicks,
pmoduleAdminStatus INTEGER,
pmoduleOperStatus INTEGER
}
pmoduleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each module within the chassis."
::= { pmoduleEntry 1 }
pmoduleType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
gbe2Module(2), -- 2 port Gigabit Ethernet line
-- interface, 1 Fast Ethernet
-- 10/100 management interface
fe2Module(3), -- 2 port Fast Ethernet line interface,
-- 1 Fast Ethernet 10/100
-- management interface
gbe4Module(4), -- 4 port Gigabit Ethernet line
-- interface, 1 or 2 Fast
-- Ethernet 10/100 management interface
fe4Module(5), -- 4 port Fast Ethernet line interface,
-- 2 Fast Ethernet 10/100 management
-- interface
oc124Module(6), -- 4 port OC12 line interface, 1 or 2
-- Fast Ethernet 10/100 management
-- interface
fe8Module(7) -- 8 port Fast Ethernet line interface,
-- 2 Fast Ethernet 10/100 management
-- interface
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of module."
::= { pmoduleEntry 2 }
pmoduleNumTrafficProcessors OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of traffic processors supported by this
module."
::= { pmoduleEntry 3 }
pmoduleSlotNum OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is determined by the chassis slot number
where this module is located. Valid entries are 1
to the value of chassisNumSlots."
::= { pmoduleEntry 4 }
pmoduleHwVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware version of the module."
::= { pmoduleEntry 5 }
pmoduleNumPorts OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports supported by this module."
::= { pmoduleEntry 6 }
pmoduleNumLinks OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of links carrying inband traffic that are
supported by this module. Link is uniquely defined
by the two ports that are at its end-points."
::= { pmoduleEntry 7 }
pmoduleConnectionMode OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
inline(2), -- In this mode the SCE is both
-- receiving and transmitting
-- traffic on the line ports.
receiveOnly(3), -- In this mode the SCE can only
-- receive packets from the line
-- ports, this mode is suitable
-- for external splitting topology.
inlineCascade(4), -- In this mode the SCE is
-- both receiving and transmitting
-- traffic on the line ports and the
-- cascade ports.
receiveOnlyCascade(5) -- In this mode the SCE can
-- only receive packets from the line
-- and the cascade ports, this mode is
-- suitable for external
-- splitting topology.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the connection mode of a module."
::= { pmoduleEntry 8 }
pmoduleSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the serial number of the module."
::= { pmoduleEntry 9 }
-- updates since OS version 1.5
pmoduleUpStreamAttackFilteringTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated time which
attack up-stream traffic was filtered."
::= { pmoduleEntry 10 }
pmoduleUpStreamLastAttackFilteringTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the previous attack was filtered
in the up-stream traffic."
::= { pmoduleEntry 11 }
pmoduleDownStreamAttackFilteringTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated time
which attack down-stream
traffic was filtered."
::= { pmoduleEntry 12 }
pmoduleDownStreamLastAttackFilteringTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the previous attack was filtered
in the down-stream traffic."
::= { pmoduleEntry 13 }
pmoduleAttackObjectsClearTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time since
the attack objects were cleared. Writing a 0 to this
object causes the counters to be cleared."
::= { pmoduleEntry 14 }
-- updates since OS version 2.0
pmoduleAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
primary(2), -- the module that should handle the traffic.
secondary(3) -- the fail-over module.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates configuration of a module in respect
to whether the module should handle traffic."
::= { pmoduleEntry 15 }
pmoduleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
active(2), -- currently the module that handles the traffic.
standby(3) -- currently the fail-over module.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current module's role in respect to
whether the module handles traffic."
::= { pmoduleEntry 16 }
-- the Link group
linkTable OBJECT-TYPE
SYNTAX SEQUENCE OF LinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link table provides information regarding the
configuration and status of the links
that pass through the SE and carry inband traffic.
The number of entries in this table is
determined by the number of modules in
the chassis and the number of links
on each module."
::= { linkGrp 1 }
linkEntry OBJECT-TYPE
SYNTAX LinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the Link."
INDEX { linkModuleIndex, linkIndex }
::= { linkTable 1 }
LinkEntry ::=
SEQUENCE {
linkModuleIndex Integer32,
linkIndex Integer32,
linkAdminModeOnActive LinkModeType,
linkAdminModeOnFailure LinkModeType,
linkOperMode LinkModeType,
linkStatusReflectionEnable INTEGER,
linkSubscriberSidePortIndex Integer32,
linkNetworkSidePortIndex Integer32
}
linkModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the module
where this link is located."
::= { linkEntry 1 }
linkIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this link
within a module.
Valid entries are 1 to the value of moduleNumLinks
for this module."
::= { linkEntry 2 }
linkAdminModeOnActive OBJECT-TYPE
SYNTAX LinkModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired mode of the link when the module's
operating status is Active and the module
is not in boot or failure.
The possible modes are bypass, forwarding and sniffing.
In bypass mode the traffic is forwarded
from one port to the other using an internal splitter.
In forwarding mode the traffic is forwarded through the
internal hardware and software modules of the SE.
In sniffing mode the traffic is passed in the same
manner as in bypass mode, however a copy of the traffic
is made and analyzed internally in the box."
::= { linkEntry 3 }
linkAdminModeOnFailure OBJECT-TYPE
SYNTAX LinkModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired mode of the link when the system's
operational status is Failure.
The possible modes are Bypass and Cutoff.
In Bypass mode the traffic is forwarded
from one port to the other using an internal splitter.
In Cutoff mode the traffic is dropped by the SE."
::= { linkEntry 4 }
linkOperMode OBJECT-TYPE
SYNTAX LinkModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational mode of the link.
In Bypass mode the traffic is forwarded from one port
to the other using an internal splitter.
In Forwarding mode the traffic is forwarded through
the internal software and hardware modules of the SCE.
In Sniffing mode the traffic is forwarded in the same
manner as in Bypass mode, however the traffic
is passed through the internal software and
hardware modules of the SCE for analyzing.
in Cutoff mode the traffic is dropped by
the SCE platform."
::= { linkEntry 5 }
linkStatusReflectionEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if failure of the physical link on one i/f
should trigger the failure of the link
on the other i/f."
::= { linkEntry 6 }
-- updates in OS version 2.0
linkSubscriberSidePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this link with
its related port that is connected to the subscriber
side."
::= { linkEntry 7 }
linkNetworkSidePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this link with
its related port that is connected to
the network side."
::= { linkEntry 8 }
-- the disk group
diskNumUsedBytes OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of used bytes."
::= { diskGrp 1 }
diskNumFreeBytes OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of free bytes."
::= { diskGrp 2 }
-- the RDR-formatter group
rdrFormatterEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the RDR-formatter is enabled or
disabled. When the RDR-formatter is enabled,
it sends the reports it gets from the traffic processors
to the Data Collector as defined in the rdrFormatterDestTable."
::= { rdrFormatterGrp 1 }
rdrFormatterDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdrFormatterDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RDR-formatter destinations table (0 to 3 entries).
This table lists the addresses of Data Collectors.
If the RDR-formatter is enabled, the destination with
the highest priority that a TCP connection to it can be
established would receive the reports generated by the
traffic processors."
::= { rdrFormatterGrp 2 }
rdrFormatterDestEntry OBJECT-TYPE
SYNTAX RdrFormatterDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A destination table entry."
INDEX { rdrFormatterDestIPAddr, rdrFormatterDestPort }
::= { rdrFormatterDestTable 1 }
RdrFormatterDestEntry ::=
SEQUENCE {
rdrFormatterDestIPAddr
IpAddress,
rdrFormatterDestPort
Integer32,
rdrFormatterDestPriority
Integer32,
rdrFormatterDestStatus
INTEGER,
rdrFormatterDestConnectionStatus
INTEGER,
rdrFormatterDestNumReportsSent
Unsigned32,
rdrFormatterDestNumReportsDiscarded
Unsigned32,
rdrFormatterDestReportRate
Unsigned32,
rdrFormatterDestReportRatePeak
Unsigned32,
rdrFormatterDestReportRatePeakTime
TimeTicks
}
rdrFormatterDestIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of a Data Collector."
::= { rdrFormatterDestEntry 1 }
rdrFormatterDestPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port on which the Data Collector listens."
::= { rdrFormatterDestEntry 2 }
rdrFormatterDestPriority OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority given to the Data Collector.
The active Data Collector is the Data Collector with
the highest priority and a TCP connection that is up."
::= { rdrFormatterDestEntry 3 }
rdrFormatterDestStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
active(2), -- this destination is where the
-- reports are sent to
standby(3) -- this destination is a backup
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In 'redundancy(2)' and in 'simpleLoadBalancing(3)'
rdrFormatterForwardingMode there can be only
one 'active' destination, which is where the
reports are currently being sent to.
In 'multicast(4)' modes all destinations will
receive the active(2) status."
::= { rdrFormatterDestEntry 4 }
rdrFormatterDestConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
up(2), -- the TCP connection to this
-- destination is up
down(3) -- the TCP connection to
-- this destination is down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of TCP connection
to this destination."
::= { rdrFormatterDestEntry 5 }
-- rdrFormatterDest... updates since OS version 1.5
rdrFormatterDestNumReportsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of reports sent by the
RDR-formatter to this destination."
::= { rdrFormatterDestEntry 6 }
rdrFormatterDestNumReportsDiscarded OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Indicates the number of reports dropped by the
RDR-formatter on this destination."
::= { rdrFormatterDestEntry 7 }
rdrFormatterDestReportRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the rate of the reports
(in reports per second) currently sent to this
destination."
::= { rdrFormatterDestEntry 8 }
rdrFormatterDestReportRatePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum report rate sent
to this destination."
::= { rdrFormatterDestEntry 9 }
rdrFormatterDestReportRatePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the rdrFormatterDestReportRatePeak value occurred."
::= { rdrFormatterDestEntry 10 }
-- end of rdrFormatterEntry specification
rdrFormatterNumReportsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of reports sent by the
RDR-formatter."
::= { rdrFormatterGrp 3 }
rdrFormatterNumReportsDiscarded OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of reports dropped by the
RDR-formatter."
::= { rdrFormatterGrp 4 }
rdrFormatterClearCountersTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time since RDR-formatter counters
were last cleared. Writing a 0 to this
object causes the RDR-formatter counters
to be cleared."
::= { rdrFormatterGrp 5 }
-- updates since OS version 1.5
rdrFormatterReportRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the rate of the reports
(in reports per second) currently
sent to all of the destinations."
::= { rdrFormatterGrp 6 }
rdrFormatterReportRatePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum report rate sent to all
of the destinations."
::= { rdrFormatterGrp 7 }
rdrFormatterReportRatePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the rdrFormatterReportRatePeak value occurred."
::= { rdrFormatterGrp 8 }
rdrFormatterProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
rdrv1(2), -- RDR protocol version 1
rdrv2(3) -- RDR protocol version 2
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the RDR protocol currently in use."
::= { rdrFormatterGrp 9 }
rdrFormatterForwardingMode OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
redundancy(2), -- the reports are sent to the primary
-- (active destination and all of
-- the other
-- destinations are in standby
simpleLoadBalancing(3), -- the reports are sent to one
-- destination
-- at a time in a round robin manner
multicast(4) -- the reports are sent to all of the
-- destinations
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the mode of how the RDR formatter sends the
reports to its destinations."
::= { rdrFormatterGrp 10 }
-- updates of OS version 2.0
rdrFormatterCategoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdrFormatterCategoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RDR-formatter Category table.
Describes the different categories of RDRs and RDR
destination groups."
::= { rdrFormatterGrp 11 }
rdrFormatterCategoryEntry OBJECT-TYPE
SYNTAX RdrFormatterCategoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A category table entry."
INDEX {rdrFormatterCategoryIndex }
::= { rdrFormatterCategoryTable 1 }
RdrFormatterCategoryEntry ::=
SEQUENCE {
rdrFormatterCategoryIndex
Integer32,
rdrFormatterCategoryName
SnmpAdminString,
rdrFormatterCategoryNumReportsSent
Unsigned32,
rdrFormatterCategoryNumReportsDiscarded
Unsigned32,
rdrFormatterCategoryReportRate
Unsigned32,
rdrFormatterCategoryReportRatePeak
Unsigned32,
rdrFormatterCategoryReportRatePeakTime
TimeTicks,
rdrFormatterCategoryNumReportsQueued
Unsigned32
}
rdrFormatterCategoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The category number."
::= { rdrFormatterCategoryEntry 1 }
rdrFormatterCategoryName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name given to this category."
::= { rdrFormatterCategoryEntry 2 }
rdrFormatterCategoryNumReportsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of reports sent by the
RDR-formatter to this category."
::= { rdrFormatterCategoryEntry 3 }
rdrFormatterCategoryNumReportsDiscarded OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of reports dropped by the
RDR-formatter on this category."
::= { rdrFormatterCategoryEntry 4 }
rdrFormatterCategoryReportRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the rate of the reports
(in reports per second) currently sent
to this category."
::= { rdrFormatterCategoryEntry 5 }
rdrFormatterCategoryReportRatePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum report rate sent to this category."
::= { rdrFormatterCategoryEntry 6 }
rdrFormatterCategoryReportRatePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time
since the rdrFormatterCategoryReportRatePeak
value occurred."
::= { rdrFormatterCategoryEntry 7 }
rdrFormatterCategoryNumReportsQueued OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the amount of pending reports in this
category."
::= { rdrFormatterCategoryEntry 8 }
rdrFormatterCategoryDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdrFormatterCategoryDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RDR-formatter Category destinations table.
This table lists the addresses of Data Collectors.
If the RDR-formatter is enabled, the destination with
the highest priority that a TCP connection to it can be
established would receive the reports generated by the
traffic processors."
::= { rdrFormatterGrp 12 }
rdrFormatterCategoryDestEntry OBJECT-TYPE
SYNTAX RdrFormatterCategoryDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A destination table entry."
INDEX { rdrFormatterCategoryIndex,
rdrFormatterDestIPAddr,
rdrFormatterDestPort }
::= { rdrFormatterCategoryDestTable 1 }
RdrFormatterCategoryDestEntry ::=
SEQUENCE {
rdrFormatterCategoryDestPriority
Integer32,
rdrFormatterCategoryDestStatus
INTEGER
}
rdrFormatterCategoryDestPriority OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority given to the Data Collector for this
category. The active Data Collector is the Data
Collector with the highest priority and a TCP
connection that is up."
::= { rdrFormatterCategoryDestEntry 1 }
rdrFormatterCategoryDestStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
active(2), -- this destination is where
-- the reports are sent to
standby(3) -- this destination is a backup
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In modes 'redundancy(2)' and in 'simpleLoadBalancing(3)'
there can be only one 'active' destination,
which is the destination to which reports are
being sent. In 'multicast(4)' modes all destination
will receive the 'active(2)' status."
::= { rdrFormatterCategoryDestEntry 2 }
-- the Logger group
-- The logger is responsible for logging the system synchronous
-- and asynchronous events.
loggerUserLogEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the logging of user information is
enabled or disabled."
::= { loggerGrp 1 }
loggerUserLogNumInfo OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Info messages logged into the
user log file since last reboot or last time the
counter was cleared."
::= { loggerGrp 2 }
loggerUserLogNumWarning OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Warning messages logged into
the user log file since last reboot or last time the
counter was cleared."
::= { loggerGrp 3 }
loggerUserLogNumError OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Error messages logged into the
user log file since last reboot or last time the counter
was cleared."
::= { loggerGrp 4 }
loggerUserLogNumFatal OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Fatal messages logged into the
User-Log since last reboot or last time the counter
was cleared."
::= { loggerGrp 5 }
loggerUserLogClearCountersTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time since user log
counters were last cleared. Writing a 0 to this
object causes the user log counters to be cleared."
::= { loggerGrp 6 }
-- the Subscribers group
subscribersInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubscribersInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscribers information table consists of
data regarding subscribers management operations
performed."
::= { subscribersGrp 1 }
subscribersInfoEntry OBJECT-TYPE
SYNTAX SubscribersInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SubscribersInfoEntry entry."
INDEX { pmoduleIndex }
::= { subscribersInfoTable 1 }
SubscribersInfoEntry ::=
SEQUENCE {
subscribersNumIntroduced Unsigned32,
subscribersNumFree Unsigned32,
subscribersNumIpAddrMappings Unsigned32,
subscribersNumIpAddrMappingsFree Unsigned32,
subscribersNumIpRangeMappings Unsigned32,
subscribersNumIpRangeMappingsFree Unsigned32,
subscribersNumVlanMappings Unsigned32,
subscribersNumVlanMappingsFree Unsigned32,
subscribersNumActive Unsigned32,
subscribersNumActivePeak Unsigned32,
subscribersNumActivePeakTime TimeTicks,
subscribersNumUpdates Unsigned32,
subscribersCountersClearTime TimeTicks,
subscribersNumTpIpRanges Unsigned32,
subscribersNumTpIpRangesFree Unsigned32,
subscribersNumAnonymous Unsigned32,
subscribersNumWithSessions Unsigned32
}
subscribersNumIntroduced OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of subscribers
introduced to the SCE.
These subscribers may or may not have IP address
or VLAN mappings. Subscribers who do not have mappings
of any kind cannot be associated with traffic,
thus will be served by the SCE according to the
default settings. "
::= { subscribersInfoEntry 1 }
subscribersNumFree OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of subscribers that may be
introduced in addition to the subscribers that
are already introduced to the SCE
(subscribersNumIntroduced)."
::= { subscribersInfoEntry 2 }
subscribersNumIpAddrMappings OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of 'IP address
to subscriber' mappings."
::= { subscribersInfoEntry 3 }
subscribersNumIpAddrMappingsFree OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of free 'IP address to
subscriber' mappings that may
be used for defining new mappings."
::= { subscribersInfoEntry 4 }
subscribersNumIpRangeMappings OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of 'IP-range
to subscriber' mappings."
::= { subscribersInfoEntry 5 }
subscribersNumIpRangeMappingsFree OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of free 'IP-range to
subscriber' mappings that may
be used for defining new mappings."
::= { subscribersInfoEntry 6 }
subscribersNumVlanMappings OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of VLAN to
subscribers mappings."
::= { subscribersInfoEntry 7 }
subscribersNumVlanMappingsFree OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of free 'VLAN to
subscriber' mappings that may be used for
defining new mappings."
::= { subscribersInfoEntry 8 }
subscribersNumActive OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of active subscribers,
these subscribers necessarily
have an IP address or VLAN mappings
that define the traffic that should be associated
and served according to the subscriber
service agreement."
::= { subscribersInfoEntry 9 }
subscribersNumActivePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of subscribersNumActive
since the last time it was cleared or the
system started."
::= { subscribersInfoEntry 10 }
subscribersNumActivePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the subscribersNumActivePeak value occurred."
::= { subscribersInfoEntry 11 }
subscribersNumUpdates OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of subscribers
database updates received by the SCE."
::= { subscribersInfoEntry 12 }
subscribersCountersClearTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time since
the subscribers counters were cleared. Writing a 0
to this object causes the counters to be cleared."
::= { subscribersInfoEntry 13 }
subscribersNumTpIpRanges OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of 'Traffic Processor
IP ranges' used."
::= { subscribersInfoEntry 14 }
subscribersNumTpIpRangesFree OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of free 'Traffic Processor
IP ranges'."
::= { subscribersInfoEntry 15 }
subscribersNumAnonymous OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of anonymous subscribers."
::= { subscribersInfoEntry 16 }
subscribersNumWithSessions OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current number of subscribers
with open sessions."
::= { subscribersInfoEntry 17 }
-- Traffic Processor group
tpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Traffic Processor Info table consists of
data regarding traffic handled by the traffic
processors by classification of packets and flows."
::= { trafficProcessorGrp 1 }
tpInfoEntry OBJECT-TYPE
SYNTAX TpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tpInfoTable entry."
INDEX { tpModuleIndex, tpIndex }
::= { tpInfoTable 1 }
TpInfoEntry ::=
SEQUENCE {
tpModuleIndex Integer32,
tpIndex Integer32,
tpTotalNumHandledPackets Unsigned32,
tpTotalNumHandledFlows Unsigned32,
tpNumActiveFlows Unsigned32,
tpNumActiveFlowsPeak Unsigned32,
tpNumActiveFlowsPeakTime TimeTicks,
tpNumTcpActiveFlows Unsigned32,
tpNumTcpActiveFlowsPeak Unsigned32,
tpNumTcpActiveFlowsPeakTime TimeTicks,
tpNumUdpActiveFlows Unsigned32,
tpNumUdpActiveFlowsPeak Unsigned32,
tpNumUdpActiveFlowsPeakTime TimeTicks,
tpNumNonTcpUdpActiveFlows Unsigned32,
tpNumNonTcpUdpActiveFlowsPeak Unsigned32,
tpNumNonTcpUdpActiveFlowsPeakTime TimeTicks,
tpTotalNumBlockedPackets Unsigned32,
tpTotalNumBlockedFlows Unsigned32,
tpTotalNumDiscardedPacketsDueToBwLimit Unsigned32,
tpTotalNumWredDiscardedPackets Unsigned32,
tpTotalNumFragments Unsigned32,
tpTotalNumNonIpPackets Unsigned32,
tpTotalNumIpCrcErrPackets Unsigned32,
tpTotalNumIpLengthErrPackets Unsigned32,
tpTotalNumIpBroadcastPackets Unsigned32,
tpTotalNumTtlErrPackets Unsigned32,
tpTotalNumTcpUdpCrcErrPackets Unsigned32,
tpClearCountersTime TimeTicks,
tpHandledPacketsRate Unsigned32,
tpHandledPacketsRatePeak Unsigned32,
tpHandledPacketsRatePeakTime TimeTicks,
tpHandledFlowsRate Unsigned32,
tpHandledFlowsRatePeak Unsigned32,
tpHandledFlowsRatePeakTime TimeTicks,
tpCpuUtilization Integer32,
tpCpuUtilizationPeak Integer32,
tpCpuUtilizationPeakTime TimeTicks,
tpFlowsCapacityUtilization Integer32,
tpFlowsCapacityUtilizationPeak Integer32,
tpFlowsCapacityUtilizationPeakTime TimeTicks,
tpServiceLoss Integer32
}
tpModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the module
where this traffic processor is located."
::= { tpInfoEntry 1 }
tpIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this traffic
processor within a module.
The value is determined by the location of the traffic
processor on the module.
Valid entries are 1 to the value of
moduleNumTrafficProcessors for this module."
::= { tpInfoEntry 2 }
tpTotalNumHandledPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets handled by
this traffic processor since last reboot or last time
this counter was cleared."
::= { tpInfoEntry 3 }
tpTotalNumHandledFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of flows handled by
this traffic Processor since last reboot or last time
this counter was cleared."
::= { tpInfoEntry 4 }
tpNumActiveFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of flows currently being handled
by this traffic processor."
::= { tpInfoEntry 5 }
tpNumActiveFlowsPeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpNumActiveFlows since the
last time it was cleared or the system started."
::= { tpInfoEntry 6 }
tpNumActiveFlowsPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpNumActiveFlowsPeak value occurred."
::= { tpInfoEntry 7 }
tpNumTcpActiveFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of TCP flows currently being
handled by this traffic processor."
::= { tpInfoEntry 8 }
tpNumTcpActiveFlowsPeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpNumTcpActiveFlows since
the last time it was cleared or the system started."
::= { tpInfoEntry 9 }
tpNumTcpActiveFlowsPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpNumTcpActiveFlowsPeak value occurred."
::= { tpInfoEntry 10 }
tpNumUdpActiveFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of UDP flows currently being
handled by this traffic processor."
::= { tpInfoEntry 11 }
tpNumUdpActiveFlowsPeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpNumUdpActiveFlows since
the last time it was cleared or the system started."
::= { tpInfoEntry 12 }
tpNumUdpActiveFlowsPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpNumUdpActiveFlowsPeak value occurred."
::= { tpInfoEntry 13 }
tpNumNonTcpUdpActiveFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of non TCP/UDP flows currently
being handled by this traffic processor."
::= { tpInfoEntry 14 }
tpNumNonTcpUdpActiveFlowsPeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpNumNonTcpUdpActiveFlows
since the last time it was cleared or the system
started."
::= { tpInfoEntry 15 }
tpNumNonTcpUdpActiveFlowsPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpNumNonTcpUdpActiveFlowsPeak value occurred."
::= { tpInfoEntry 16 }
tpTotalNumBlockedPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets discarded
by this traffic processor according to application
blocking rules."
::= { tpInfoEntry 17 }
tpTotalNumBlockedFlows OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of flows discarded by
this traffic processor according to application
blocking rules."
::= { tpInfoEntry 18 }
tpTotalNumDiscardedPacketsDueToBwLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets discarded
by this traffic processor due to subscriber bandwidth
limitations."
::= { tpInfoEntry 19 }
tpTotalNumWredDiscardedPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets discarded
by this traffic processor due to congestion in the
queues."
::= { tpInfoEntry 20 }
tpTotalNumFragments OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of fragmented packets
handled by this traffic processor."
::= { tpInfoEntry 21 }
tpTotalNumNonIpPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of non IP packets
handled by this traffic processor."
::= { tpInfoEntry 22 }
tpTotalNumIpCrcErrPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets with IP CRC
error handled by this traffic processor."
::= { tpInfoEntry 23 }
tpTotalNumIpLengthErrPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets with IP
length error handled by this traffic processor."
::= { tpInfoEntry 24 }
tpTotalNumIpBroadcastPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of IP broadcast
packets handled by this traffic processor."
::= { tpInfoEntry 25 }
tpTotalNumTtlErrPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of packets with TTL
error handled by this traffic processor."
::= { tpInfoEntry 26 }
tpTotalNumTcpUdpCrcErrPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the accumulated number of TCP/UDP packets
with CRC error handled by this traffic processor."
::= { tpInfoEntry 27 }
tpClearCountersTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time since
the traffic processor statistics counters were last
cleared. Writing a 0 to this object causes the traffic
processor counters to be cleared."
::= { tpInfoEntry 28 }
-- updates since OS version 1.5
tpHandledPacketsRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the rate in packets per second of
the packets handled by this traffic processor."
::= { tpInfoEntry 29 }
tpHandledPacketsRatePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpHandledPacketsRate
since the last time it was cleared or the system
started."
::= { tpInfoEntry 30 }
tpHandledPacketsRatePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpHandledPacketsRatePeak value occurred."
::= { tpInfoEntry 31 }
tpHandledFlowsRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the rate in flows opening per second of the
flows handled by this traffic processor."
::= { tpInfoEntry 32 }
tpHandledFlowsRatePeak OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpHandledFlowsRate since
the last time it was cleared or the system started."
::= { tpInfoEntry 33 }
tpHandledFlowsRatePeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpHandledFlowsRatePeakTime value occurred."
::= { tpInfoEntry 34 }
tpCpuUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the percentage of CPU utilization, updated
once every 2 minutes."
::= { tpInfoEntry 35 }
tpCpuUtilizationPeak OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpCpuUtilization since the
last time it was cleared or the system started."
::= { tpInfoEntry 36 }
tpCpuUtilizationPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpCpuUtilizationPeak value occurred."
::= { tpInfoEntry 37 }
tpFlowsCapacityUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the percentage of flows capacity utilization."
::= { tpInfoEntry 38 }
tpFlowsCapacityUtilizationPeak OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of tpFlowsCapacityUtilization
since the last time it was cleared or the system
started."
::= { tpInfoEntry 39 }
tpFlowsCapacityUtilizationPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since
the tpFlowsCapacityUtilizationPeak value occurred."
::= { tpInfoEntry 40 }
tpServiceLoss OBJECT-TYPE
SYNTAX Integer32 (0..100000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the relative amount of service loss
in this traffic Processor, in units of 0.001%,
since last reboot or last time this counter was
cleared."
::= { tpInfoEntry 41 }
-- the port Group
pportTable OBJECT-TYPE
SYNTAX SEQUENCE OF PportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports on each module."
::= { pportGrp 1 }
pportEntry OBJECT-TYPE
SYNTAX PportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information for a particular port
on a module."
INDEX { pportModuleIndex, pportIndex }
::= { pportTable 1 }
PportEntry ::=
SEQUENCE {
pportModuleIndex Integer32,
pportIndex Integer32,
pportType INTEGER,
pportNumTxQueues Integer32,
pportIfIndex Integer32,
pportAdminSpeed INTEGER,
pportAdminDuplex INTEGER,
pportOperDuplex INTEGER,
pportLinkIndex Integer32,
pportOperStatus INTEGER
}
pportModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the module where
this port is located."
::= { pportEntry 1 }
pportIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this port
within a module.
The value is determined by the location of the
port on the module. Valid entries are 1 to the value
of moduleNumPorts for this module."
::= { pportEntry 2 }
pportType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
e100BaseTX(11), -- UTP Fast Ethernet (Cat 5)
e1000BaseT(15),
e1000BaseSX(28) -- Short Wave fiber Giga Ethernet
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of physical layer medium dependent interface
on the port."
::= { pportEntry 3 }
pportNumTxQueues OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit queues supported by this port."
::= { pportEntry 4 }
pportIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the instance of the ifIndex object,
defined in MIB-II, for this port."
::= { pportEntry 5 }
pportAdminSpeed OBJECT-TYPE
SYNTAX INTEGER {
autoNegotiation(1),
s10000000(10000000), -- 10 Mbps
s100000000(100000000), -- 100 Mbps
s1000000000(1000000000) -- 1 Gbps
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired speed of the port.
The current operational speed of the port can be
determined from ifSpeed."
::= { pportEntry 6 }
pportAdminDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired duplex of the port."
::= { pportEntry 7 }
pportOperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port is operating in half-duplex
or full-duplex."
::= { pportEntry 8 }
pportLinkIndex OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the linkIndex of the link that this port
belongs to. Value of 0 indicates that this port is
not associated with any link. Value of -1 indicates
that this port is associated to multiple links."
::= { pportEntry 9 }
-- objects added at version 2.0
pportOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
up(2), -- the port is up
reflectionForcingDown(3), -- the port is currently forced
-- down due to
-- link reflection
redundancyForcingDown(4), -- the port is currently forced
-- down due to
-- redundancy reasons
otherDown(5) -- the port is down due to other
-- reasons
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the port and if the port is
down indicates the reason."
::= { pportEntry 10 }
-- the Transmit Queues Group
txQueuesTable OBJECT-TYPE
SYNTAX SEQUENCE OF TxQueuesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of information on the SCE's transmit
queues."
::= { txQueuesGrp 1 }
txQueuesEntry OBJECT-TYPE
SYNTAX TxQueuesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A txQueuesTable entry."
INDEX { txQueuesModuleIndex,
txQueuesPortIndex,
txQueuesQueueIndex
}
::= { txQueuesTable 1 }
TxQueuesEntry ::=
SEQUENCE {
txQueuesModuleIndex Integer32,
txQueuesPortIndex Integer32,
txQueuesQueueIndex Integer32,
txQueuesDescription SnmpAdminString,
txQueuesBandwidth Integer32,
txQueuesUtilization Integer32,
txQueuesUtilizationPeak Integer32,
txQueuesUtilizationPeakTime TimeTicks,
txQueuesClearCountersTime TimeTicks,
txQueuesDroppedBytes Counter64
}
txQueuesModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the module
where this queue is located."
::= { txQueuesEntry 1 }
txQueuesPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the port where
this queue is located."
::= { txQueuesEntry 2 }
txQueuesQueueIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this queue
within a port. The value is determined by the
location of the queue on the port. Valid entries
are 1 to the value of portNumTxQueues for this module."
::= { txQueuesEntry 3 }
txQueuesDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the transmit queue."
::= { txQueuesEntry 4 }
txQueuesBandwidth OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth in L1 kbps configured for this queue."
::= { txQueuesEntry 5 }
txQueuesUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of bandwidth utilization relative to the
configured rate."
::= { txQueuesEntry 6 }
txQueuesUtilizationPeak OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of txQueuesUtilization
since the last time it was cleared or the system started."
::= { txQueuesEntry 7 }
txQueuesUtilizationPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since the
txQueuesUtilizationPeak value occurred."
::= { txQueuesEntry 8 }
txQueuesClearCountersTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time since the
TX queues statistics counters were last cleared.
Writing a 0 to this object causes the TX queues
counters to be cleared."
::= { txQueuesEntry 9 }
txQueuesDroppedBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of dropped L3 bytes. This is valid only if the
system is configured to count dropped bytes per
TX queue."
::= { txQueuesEntry 10 }
-- The Global Controllers Group
globalControllersTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalControllersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of information on the SCE's Global
Controllers. note: the globalControllersIndex and the
SCE CLI configuration index have a offset of one i.e.
1 in the MIB refers to 0 in the CLI."
::= { globalControllersGrp 1 }
globalControllersEntry OBJECT-TYPE
SYNTAX GlobalControllersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A globalControllersTable entry."
INDEX { globalControllersModuleIndex,
globalControllersPortIndex,
globalControllersIndex
}
::= { globalControllersTable 1 }
GlobalControllersEntry ::=
SEQUENCE {
globalControllersModuleIndex Integer32,
globalControllersPortIndex Integer32,
globalControllersIndex Integer32,
globalControllersDescription SnmpAdminString,
globalControllersBandwidth Integer32,
globalControllersUtilization Integer32,
globalControllersUtilizationPeak Integer32,
globalControllersUtilizationPeakTime TimeTicks,
globalControllersClearCountersTime TimeTicks,
globalControllersDroppedBytes Counter64
}
globalControllersModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the module where
this controller is located."
::= { globalControllersEntry 1 }
globalControllersPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the port where
this controller is located."
::= { globalControllersEntry 2 }
globalControllersIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies this
controller within a port."
::= { globalControllersEntry 3 }
globalControllersDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the controller."
::= { globalControllersEntry 4 }
globalControllersBandwidth OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The L1 bandwidth configured for this controller."
::= { globalControllersEntry 5 }
globalControllersUtilization OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of bandwidth utilization relative to the
configured rate."
::= { globalControllersEntry 6 }
globalControllersUtilizationPeak OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the peak value of globalControllersUtilization
since the last time it was cleared or the system started."
::= { globalControllersEntry 7 }
globalControllersUtilizationPeakTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time since the
globalControllersUtilizationPeak value occurred."
::= { globalControllersEntry 8 }
globalControllersClearCountersTime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time since the
controllers statistics counters were last cleared.
Writing a 0 to this object causes the controllers
counters to be cleared."
::= { globalControllersEntry 9 }
globalControllersDroppedBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of L3 dropped bytes. This is valid only if the
system is configured to count dropped bytes per
global controller."
::= { globalControllersEntry 10 }
--
-- Application Group
--
appInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of information on the
SCE's application."
::= { applicationGrp 1 }
appInfoEntry OBJECT-TYPE
SYNTAX AppInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A appInfoTable entry."
INDEX { pmoduleIndex }
::= { appInfoTable 1 }
AppInfoEntry ::=
SEQUENCE {
appName
SnmpAdminString,
appDescription
SnmpAdminString,
appVersion
SnmpAdminString
}
appName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The application name."
::= { appInfoEntry 1 }
appDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The application description."
::= { appInfoEntry 2 }
appVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The application version."
::= { appInfoEntry 3 }
-- Application properties table
appPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The application properties table provides the list
of properties available for the application.
The table is cleared when the application is unloaded."
::= { applicationGrp 2 }
appPropertiesEntry OBJECT-TYPE
SYNTAX AppPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A appPropertiesTable entry."
INDEX { pmoduleIndex , apIndex }
::= { appPropertiesTable 1 }
AppPropertiesEntry ::=
SEQUENCE {
apIndex
Integer32,
apName
SnmpAdminString,
apType
SnmpAdminString
}
apIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identify the property."
::= { appPropertiesEntry 1 }
apName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application property name.
Property can be either scalar or array type."
::= { appPropertiesEntry 2 }
apType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application property type."
::= { appPropertiesEntry 3 }
--
-- Applications properties value table
--
appPropertiesValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppPropertiesValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The applications properties value table is used to
provide specific values
for the applications properties.
An entry must be created by setting the entry's
apvRowStatus object with
createAndGo (4) before setting the name of the
property requested. To specify the
property set the apvPropertyName objects.
The apvPropertyName must be one of the
properties from the appPropertiesTable.
To remove an entry set the apvRowStatus object
with destroy (6).
To poll the application property, poll the
apvPropertyStringValue, apvPropertyUintValue,
or apvPropertyCounter64Value object.
The table is cleared when the application is unloaded."
::= { applicationGrp 3 }
appPropertiesValueEntry OBJECT-TYPE
SYNTAX AppPropertiesValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A appPropertiesValueTable entry."
INDEX { pmoduleIndex , apvIndex }
::= { appPropertiesValueTable 1 }
AppPropertiesValueEntry ::=
SEQUENCE {
apvIndex Integer32,
apvPropertyName SnmpAdminString,
apvRowStatus RowStatus,
apvPropertyStringValue SnmpAdminString,
apvPropertyUintValue Unsigned32,
apvPropertyCounter64Value Counter64
}
apvIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to the table."
::= { appPropertiesValueEntry 1 }
apvPropertyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A name that uniquely identifies the application
property. Array type properties may be accessed
each element at a time in C like format, e.g. x[1],
or y[1][2]."
::= { appPropertiesValueEntry 2 }
apvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation of a table entry."
::= { appPropertiesValueEntry 3 }
apvPropertyStringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the application property in display
string format."
::= { appPropertiesValueEntry 4 }
apvPropertyUintValue OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the application property in
unsigned integer. If the property
can't be casted to unsigned integer this
object returns zero."
::= { appPropertiesValueEntry 5 }
apvPropertyCounter64Value OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the application property in Counter64 format.
If the property can't be casted to Counter64, getting
this object returns zero."
::= { appPropertiesValueEntry 6 }
--
-- Subscriber properties table
--
subscribersPropertiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubscribersPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscribers properties table provides
the list of properties available for each subscriber."
::= { subscribersGrp 2 }
subscribersPropertiesEntry OBJECT-TYPE
SYNTAX SubscribersPropertiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A subscribersPropertiesTable entry."
INDEX { pmoduleIndex , spIndex }
::= { subscribersPropertiesTable 1 }
SubscribersPropertiesEntry ::=
SEQUENCE {
spIndex Integer32,
spName SnmpAdminString,
spType SnmpAdminString
}
spIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identify the property."
::= { subscribersPropertiesEntry 1 }
spName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subscriber property name."
::= { subscribersPropertiesEntry 2 }
spType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subscriber application property type in respect to:
variable type (integer, boolean, string etc), number of
elements (scalar or array) and restrictions
if any exist."
::= { subscribersPropertiesEntry 3 }
--
-- Subscribers properties value table
--
subscribersPropertiesValueTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubscribersPropertiesValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscribers properties value table
is used to provide subscriber properties
values for subscribers introduced into the SCE.
An entry must be created by setting the entry's
spvRowStatus object with createAndGo (4) before
setting any other of the entry's objects.
To specify the subscriber's property set the
spvSubName and spvPropertyName objects.
The spvPropertyName must be one of the
properties from the subscribersPropertiesTable.
To remove an entry set the spvRowStatus object
with destroy (6).
To poll the subscriber property the manager
need to poll the spvPropertyStringValue,
the spvPropertyUintValue or the
spvPropertyCounter64Value objects.
The table is cleared when the application
is unloaded."
::= { subscribersGrp 3 }
subscribersPropertiesValueEntry OBJECT-TYPE
SYNTAX SubscribersPropertiesValueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A subscribersPropertiesValueTable entry."
INDEX { pmoduleIndex , spvIndex }
::= { subscribersPropertiesValueTable 1 }
SubscribersPropertiesValueEntry ::=
SEQUENCE {
spvIndex Integer32,
spvSubName SnmpAdminString,
spvPropertyName SnmpAdminString,
spvRowStatus RowStatus,
spvPropertyStringValue SnmpAdminString,
spvPropertyUintValue Unsigned32,
spvPropertyCounter64Value Counter64
}
spvIndex OBJECT-TYPE
SYNTAX Integer32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A index to the table."
::= { subscribersPropertiesValueEntry 1 }
spvSubName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A name that uniquely identifies the subscriber."
::= { subscribersPropertiesValueEntry 2 }
spvPropertyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A name that uniquely identifies the subscriber property.
Array type properties may be accessed each element
at a time in C like format, e.g. x[1], or y[1][2]."
::= { subscribersPropertiesValueEntry 3 }
spvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation of a table entry.
Only setting the createAndGo (4) and destroy (6)
will change the status of the entry."
::= { subscribersPropertiesValueEntry 4 }
spvPropertyStringValue OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the subscriber property in string format."
::= { subscribersPropertiesValueEntry 5 }
spvPropertyUintValue OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the subscriber property in unsigned
integer. If the property can't be casted to
unsigned integer this object returns zero."
::= { subscribersPropertiesValueEntry 6 }
spvPropertyCounter64Value OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the subscriber property in
Counter64. If the property can't be casted
to Counter64 this object returns zero."
::= { subscribersPropertiesValueEntry 7 }
trafficCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Traffic counters table provides information
regarding the value of different the traffic counters."
::= { trafficCountersGrp 1 }
trafficCountersEntry OBJECT-TYPE
SYNTAX TrafficCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a traffic counter."
INDEX { pmoduleIndex, trafficCounterIndex }
::= { trafficCountersTable 1 }
TrafficCountersEntry ::=
SEQUENCE {
trafficCounterIndex Integer32,
trafficCounterValue Counter64,
trafficCounterName SnmpAdminString,
trafficCounterType INTEGER
}
trafficCounterIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the counter."
::= { trafficCountersEntry 1 }
trafficCounterValue OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 64 bit counter value."
::= { trafficCountersEntry 2 }
trafficCounterName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name given to this counter."
::= { trafficCountersEntry 3 }
trafficCounterType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
bytes(2), -- counts by bytes
packets(3) -- counts by packets
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines whether there the traffic counters counts by
'packets(3)' or by 'bytes(2)'."
::= { trafficCountersEntry 4 }
-- Attack group
attackTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AttackTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Attack type table provides information regarding
detected attacks, aggregated by attack type."
::= { attackGrp 1 }
attackTypeEntry OBJECT-TYPE
SYNTAX AttackTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing aggregated information about attacks
of a given type."
INDEX { pmoduleIndex, attackTypeIndex }
::= { attackTypeTable 1 }
AttackTypeEntry ::=
SEQUENCE {
attackTypeIndex Integer32,
attackTypeName SnmpAdminString,
attackTypeCurrentNumAttacks Unsigned32,
attackTypeTotalNumAttacks Unsigned32,
attackTypeTotalNumFlows Counter64,
attackTypeTotalNumSeconds Unsigned32
}
attackTypeIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies the attack type."
::= { attackTypeEntry 1 }
attackTypeName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this attack type."
::= { attackTypeEntry 2 }
attackTypeCurrentNumAttacks OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current amount of attacks detected of this type."
::= { attackTypeEntry 3 }
attackTypeTotalNumAttacks OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of attacks detected of this type
since last clear."
::= { attackTypeEntry 4 }
attackTypeTotalNumFlows OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of flows in attacks detected of
this type since last clear."
::= { attackTypeEntry 5 }
attackTypeTotalNumSeconds OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total duration of attacks detected of this type
since last clear."
::= { attackTypeEntry 6 }
-- This counter is not supported from MIB 3.0.3, set methods
-- are not supported in general.
--attackTypeTableClearTime OBJECT-TYPE
-- SYNTAX TimeTicks
-- UNITS "milliseconds"
-- MAX-ACCESS read-write
-- STATUS current
--
-- DESCRIPTION "Indicates the time
-- since the attack type table was cleared.
-- Writing a 0 to this object causes the
-- counters to be cleared."
-- ::= { attackGrp 2 }
-- vasTrafficForwarding group
vasServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF VasServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VAS server Table provides information on each
VAS server operational status."
::= { vasTrafficForwardingGrp 1 }
vasServerEntry OBJECT-TYPE
SYNTAX VasServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about VAS server status."
INDEX { pmoduleIndex, vasServerIndex }
::= { vasServerTable 1 }
VasServerEntry ::=
SEQUENCE {
vasServerIndex Integer32,
vasServerId Integer32,
vasServerAdminStatus INTEGER,
vasServerOperStatus INTEGER
}
vasServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies a VAS server."
::= { vasServerEntry 1 }
vasServerId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the VAS server."
::= { vasServerEntry 2 }
vasServerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- non of the other options
up(2), -- the vas server is up
down(3) -- The vas server is down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates only the administrative status of the
VAS sever, in order to activate a server it should
be also configured with a VLAN and a group."
::= { vasServerEntry 3 }
vasServerOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- non of the other options
up(2), -- The vas server is up
down(3) -- the vas server is down
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the VAS sever."
::= { vasServerEntry 4 }
-- MPLS VPN auto learning group
mplsVpnSoftwareCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnSoftwareCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MPLS VPN software counters table
provides information on
various system software
counters related to MPLS VPN auto learn."
::= { mplsVpnAutoLearnGrp 1 }
mplsVpnSoftwareCountersEntry OBJECT-TYPE
SYNTAX MplsVpnSoftwareCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information
about MPLS VPN auto learn SW counters."
INDEX { pmoduleIndex }
::= { mplsVpnSoftwareCountersTable 1 }
MplsVpnSoftwareCountersEntry ::=
SEQUENCE {
mplsVpnMaxHWMappings Integer32,
mplsVpnCurrentHWMappings Integer32
}
mplsVpnMaxHWMappings OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of MPLS VPN
mappings supported by HW (including all kinds
of mappings)."
::= { mplsVpnSoftwareCountersEntry 1 }
mplsVpnCurrentHWMappings OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of HW MPLS
VPN mappings in use."
::= { mplsVpnSoftwareCountersEntry 2 }
-- traps
pcubeSeEventsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
operationalStatusOperationalTrap,
operationalStatusWarningTrap,
operationalStatusFailureTrap,
systemResetTrap,
chassisTempAlarmOnTrap,
chassisTempAlarmOffTrap,
chassisVoltageAlarmOnTrap,
chassisFansAlarmOnTrap,
chassisPowerSupplyAlarmOnTrap,
rdrActiveConnectionTrap,
rdrNoActiveConnectionTrap,
rdrConnectionUpTrap,
rdrConnectionDownTrap,
telnetSessionStartedTrap,
telnetSessionEndedTrap,
telnetSessionDeniedAccessTrap,
telnetSessionBadLoginTrap,
loggerUserLogIsFullTrap,
sntpClockDriftWarnTrap,
linkModeBypassTrap,
linkModeForwardingTrap,
linkModeCutoffTrap,
moduleAttackFilterActivatedTrap,
moduleAttackFilterDeactivatedTrap,
moduleEmAgentGenericTrap,
linkModeSniffingTrap,
moduleRedundancyReadyTrap,
moduleRedundantConfigurationMismatchTrap,
moduleLostRedundancyTrap,
moduleSmConnectionDownTrap,
moduleSmConnectionUpTrap,
moduleOperStatusChangeTrap,
portOperStatusChangeTrap,
chassisLineFeedAlarmOnTrap,
rdrFormatterCategoryDiscardingReportsTrap,
rdrFormatterCategoryStoppedDiscardingReportsTrap,
sessionStartedTrap,
sessionEndedTrap,
sessionDeniedAccessTrap,
sessionBadLoginTrap,
illegalSubscriberMappingTrap,
loggerLineAttackLogFullTrap,
vasServerOpertionalStatusChangeTrap,
pullRequestRetryFailedTrap,
mplsVpnTotalHWMappingsThresholdExceededTrap
}
STATUS deprecated
DESCRIPTION
"Pcube notifications. Contains deprecated objects."
::= { pcubeSeConformance 3 }
pcubeSeEventsGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
operationalStatusOperationalTrap,
operationalStatusWarningTrap,
operationalStatusFailureTrap,
systemResetTrap,
chassisTempAlarmOnTrap,
chassisTempAlarmOffTrap,
chassisVoltageAlarmOnTrap,
chassisFansAlarmOnTrap,
chassisPowerSupplyAlarmOnTrap,
rdrActiveConnectionTrap,
rdrNoActiveConnectionTrap,
rdrConnectionUpTrap,
rdrConnectionDownTrap,
loggerUserLogIsFullTrap,
sntpClockDriftWarnTrap,
linkModeBypassTrap,
linkModeForwardingTrap,
linkModeCutoffTrap,
moduleAttackFilterActivatedTrap,
moduleAttackFilterDeactivatedTrap,
moduleEmAgentGenericTrap,
linkModeSniffingTrap,
moduleRedundancyReadyTrap,
moduleRedundantConfigurationMismatchTrap,
moduleLostRedundancyTrap,
moduleSmConnectionDownTrap,
moduleSmConnectionUpTrap,
moduleOperStatusChangeTrap,
portOperStatusChangeTrap,
chassisLineFeedAlarmOnTrap,
rdrFormatterCategoryDiscardingReportsTrap,
rdrFormatterCategoryStoppedDiscardingReportsTrap,
sessionStartedTrap,
sessionEndedTrap,
sessionDeniedAccessTrap,
sessionBadLoginTrap,
illegalSubscriberMappingTrap,
loggerLineAttackLogFullTrap,
vasServerOpertionalStatusChangeTrap,
pullRequestRetryFailedTrap,
mplsVpnTotalHWMappingsThresholdExceededTrap
}
STATUS current
DESCRIPTION
"Pcube notifications."
::= { pcubeSeConformance 4 }
pcubeSeEvents OBJECT IDENTIFIER ::= { pcubeWorkgroup 0 }
operationalStatusOperationalTrap NOTIFICATION-TYPE
OBJECTS { sysOperationalStatus }
STATUS current
DESCRIPTION
"OperationalStatusOperational notification signifies that the
agent entity has detected the sysOperationalStatus
object in this MIB has changed to 'operational(3)'."
::= { pcubeSeEvents 1 }
operationalStatusWarningTrap NOTIFICATION-TYPE
OBJECTS { sysOperationalStatus }
STATUS current
DESCRIPTION
"OperationalStatusWarning notification signifies that the agent
entity has detected the sysOperationalStatus object
in this MIB has changed to 'warning(4)'."
::= { pcubeSeEvents 2 }
operationalStatusFailureTrap NOTIFICATION-TYPE
OBJECTS { sysOperationalStatus }
STATUS current
DESCRIPTION
"OperationalStatusFailure notification signifies that the agent
entity has detected the sysOperationalStatus object in
this MIB has changed to 'failure(5)'."
::= { pcubeSeEvents 3 }
systemResetTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A systemReset notification signifies that the agent entity
is about to reset itself either per user's request or
due to a fatal event."
::= { pcubeSeEvents 4 }
chassisTempAlarmOnTrap NOTIFICATION-TYPE
OBJECTS { pchassisTempAlarm }
STATUS current
DESCRIPTION
"A chassisTempAlarmOn notification signifies that the agent
entity has detected the chassisTempAlarm object in this
MIB has changed to the 'on(3)' state
(temperature is too high)."
::= { pcubeSeEvents 5 }
chassisTempAlarmOffTrap NOTIFICATION-TYPE
OBJECTS { pchassisTempAlarm }
STATUS current
DESCRIPTION
"A chassisTempAlarmOff notification signifies that the agent
entity has detected the chassisTempAlarm object in this
MIB has changed to the 'off(2)' state
(temperature level is back to normal)."
::= { pcubeSeEvents 6 }
chassisVoltageAlarmOnTrap NOTIFICATION-TYPE
OBJECTS { pchassisVoltageAlarm }
STATUS current
DESCRIPTION
"A chassisVoltageAlarmOn notification signifies that the agent
entity has detected the chassisVoltageAlarm object in this
MIB has changed to the 'on(3)' state
(voltage level is too high)."
::= { pcubeSeEvents 7 }
chassisFansAlarmOnTrap NOTIFICATION-TYPE
OBJECTS { pchassisFansAlarm }
STATUS current
DESCRIPTION
"A chassisFanStatusFailure notification signifies that the
agent entity has detected the chassisFansAlarm object in this
MIB has changed to the 'on(3)' state."
::= { pcubeSeEvents 8 }
chassisPowerSupplyAlarmOnTrap NOTIFICATION-TYPE
OBJECTS { pchassisPowerSupplyAlarm }
STATUS current
DESCRIPTION
"A chassisPsuStatusFailure notification signifies that the
agent entity has detected the chassisPowerSupplyAlarm object
in this MIB has changed to the 'on(3)' state."
::= { pcubeSeEvents 9 }
rdrActiveConnectionTrap NOTIFICATION-TYPE
OBJECTS { rdrFormatterDestIPAddr, rdrFormatterDestStatus }
STATUS current
DESCRIPTION
"RdrConnectionDestTypeActive notification signifies that
the agent entity has detected the rdrFormatterDestStatus
object in this MIB has changed to the 'active(2)' state."
::= { pcubeSeEvents 10 }
rdrNoActiveConnectionTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A rdrNoActiveConnection notification signifies that the
agent entity has detected there is no active
connection between the RDR-formatter and any
Data Collector."
::= { pcubeSeEvents 11 }
rdrConnectionUpTrap NOTIFICATION-TYPE
OBJECTS { rdrFormatterDestIPAddr,
rdrFormatterDestConnectionStatus }
STATUS current
DESCRIPTION
"RdrConnectionStatusUp notification signifies that the agent
entity has detected the rdrFormatterDestConnectionStatus
object in this MIB has changed to 'up(2)'."
::= { pcubeSeEvents 12 }
rdrConnectionDownTrap NOTIFICATION-TYPE
OBJECTS { rdrFormatterDestIPAddr,
rdrFormatterDestConnectionStatus }
STATUS current
DESCRIPTION
"RdrConnectionStatusDown notification signifies that the agent
entity has detected the rdrFormatterDestConnectionStatus
object in this MIB has changed to 'down(3)'."
::= { pcubeSeEvents 13 }
telnetSessionStartedTrap NOTIFICATION-TYPE
STATUS deprecated
DESCRIPTION
"Replaced by the more generic sessionStartedTrap."
::= { pcubeSeEvents 14 }
telnetSessionEndedTrap NOTIFICATION-TYPE
STATUS deprecated
DESCRIPTION
"Replaced by the more generic sessionEndedTrap."
::= { pcubeSeEvents 15 }
telnetSessionDeniedAccessTrap NOTIFICATION-TYPE
STATUS deprecated
DESCRIPTION
"Replaced by the more generic sessionDeniedAccessTrap."
::= { pcubeSeEvents 16 }
telnetSessionBadLoginTrap NOTIFICATION-TYPE
STATUS deprecated
DESCRIPTION
"Replaced by the more generic sessionBadLoginTrap."
::= { pcubeSeEvents 17 }
loggerUserLogIsFullTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A loggerUserLogIsFull notification signifies that the agent
entity has detected the User log file is full.
In such case the agent entity rolls to the next file."
::= { pcubeSeEvents 18 }
sntpClockDriftWarnTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"An sntpClockDriftWarn notification signifies that the entity's
SNTP agent did not receive time update for
a long period, this may cause a time drift."
::= { pcubeSeEvents 19 }
linkModeBypassTrap NOTIFICATION-TYPE
OBJECTS { linkOperMode }
STATUS current
DESCRIPTION
"A linkModeBypass notification signifies that the agent entity
has detected that the linkOperMode object in this MIB
has changed to 'bypass(2)'."
::= { pcubeSeEvents 20 }
linkModeForwardingTrap NOTIFICATION-TYPE
OBJECTS { linkOperMode }
STATUS current
DESCRIPTION
"A linkModeForwarding notification signifies that the agent
entity has detected that the linkOperMode object
in this MIB has changed to 'forwarding(3)'."
::= { pcubeSeEvents 21 }
linkModeCutoffTrap NOTIFICATION-TYPE
OBJECTS { linkOperMode }
STATUS current
DESCRIPTION
"A linkModeCutoff notification signifies that the agent
entity has detected that the linkOperMode object
in this MIB has changed to 'cutoff(4)'."
::= { pcubeSeEvents 22 }
-- updates since OS version 1.5
pcubeSeEventGenericString1 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string used for traps. Always returns
an empty string."
::= { pcubeSeEvents 23 }
pcubeSeEventGenericString2 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string used for traps. Always returns
an empty string."
::= { pcubeSeEvents 24 }
moduleAttackFilterActivatedTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex, pcubeSeEventGenericString1 }
STATUS current
DESCRIPTION
"A moduleAttackFilterActivated notification signifies
that the agent entity's attack filter module has
activated a filter. The pcubeSeEventGenericString1
is the type of attack-filter, which was activated."
::= { pcubeSeEvents 25 }
moduleAttackFilterDeactivatedTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
pcubeSeEventGenericString1,
pcubeSeEventGenericString2 }
STATUS current
DESCRIPTION
"A portAttackFilterDeactivated notification signifies that the
agent entity's attack filter module has removed a
filter that was previously activated.
The pcubeSeEventGenericString1 is the attack-filter
type, which was sent in the corresponding
moduleAttackFilterActivatedTrap.
the pcubeSeEventGenericString2 is the reason
for deactivating the filter."
::= { pcubeSeEvents 26 }
moduleEmAgentGenericTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
pcubeSeEventGenericString1,
pcubeSeEventGenericString2 }
STATUS current
DESCRIPTION
"A generic notification used by the P-Cube EM agent.
pcubeSeEventGenericString1 specifies what
notification is it, and pcubeSeEventGenericString2
is the relevant parameter."
::= { pcubeSeEvents 27 }
-- traps added for version 2.0
linkModeSniffingTrap NOTIFICATION-TYPE
OBJECTS { linkOperMode }
STATUS current
DESCRIPTION
"A linkModeSniffing notification signifies that the
agent entity has detected that the linkOperMode
object in this MIB has changed to 'sniffing(5)'."
::= { pcubeSeEvents 28 }
moduleRedundancyReadyTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex, pmoduleOperStatus }
STATUS current
DESCRIPTION
"A moduleRedundancyReady notification signifies that the module
was able to connect and synchronize with a redundant entity,
and is now ready to handle fail-over if needed."
::= { pcubeSeEvents 29 }
moduleRedundantConfigurationMismatchTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex }
STATUS current
DESCRIPTION
"A moduleRedundantConfigurationMismatch notification signifies
that the module was not able to synchronize with a redundant
entity, due to a essential configuration parameters that are do
not match between the
module and the redundant entity."
::= { pcubeSeEvents 30 }
moduleLostRedundancyTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex, pmoduleOperStatus }
STATUS current
DESCRIPTION
"A moduleLostRedundancy notification signifies that the module
has lost the ability to perform the fail-over procedure."
::= { pcubeSeEvents 31 }
moduleSmConnectionDownTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex }
STATUS current
DESCRIPTION
"A moduleSmConnectionDown notification signifies that the
module's virtual connection to the subscriber
manager is broken."
::= { pcubeSeEvents 32 }
moduleSmConnectionUpTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex }
STATUS current
DESCRIPTION
"A moduleSmConnectionUp notification signifies that
the module's virtual connection to the subscriber manager
is up and working."
::= { pcubeSeEvents 33 }
moduleOperStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
pmoduleOperStatus }
STATUS current
DESCRIPTION
"A moduleOperStatusChangeTrap notification signifies
that the moduleOperStatus has changed its value."
::= { pcubeSeEvents 34 }
portOperStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
pportIndex,
pportOperStatus }
STATUS current
DESCRIPTION
"A portOperStatusChangeTrap notification signifies
that the portOperStatus object of the portIndex has changed
its value, i.e., the link was forced down or the force
down was released."
::= { pcubeSeEvents 35 }
chassisLineFeedAlarmOnTrap NOTIFICATION-TYPE
OBJECTS { pchassisLineFeedAlarm }
STATUS current
DESCRIPTION
"A chassisLineFeedAlarmOn notification signifies that the agent
entity has detected the chassisLineFeed object in this
MIB has changed to the 'on(3)' state."
::= { pcubeSeEvents 36 }
rdrFormatterCategoryDiscardingReportsTrap NOTIFICATION-TYPE
OBJECTS { rdrFormatterCategoryIndex }
STATUS current
DESCRIPTION
"rdrCategoryDiscardingReportsTrap notification signifies that
the agent entity has detected that reports send to this
category are being discarded.
The rdrFormatterCategoryNumReportsDiscarded object in
this MIB is counting the amount of discarded reports."
::= { pcubeSeEvents 37 }
rdrFormatterCategoryStoppedDiscardingReportsTrap NOTIFICATION-TYPE
OBJECTS { rdrFormatterCategoryIndex }
STATUS current
DESCRIPTION
"rdrCategoryStoppedDiscardingReportsTrap notification signifies
that the agent entity has detected that reports send to this
category are not being discarded any more.
The rdrFormatterCategoryNumReportsDiscarded object in this
MIB is counting the amount of discarded reports."
::= { pcubeSeEvents 38 }
sessionStartedTrap NOTIFICATION-TYPE
OBJECTS { pcubeSeEventGenericString1 }
STATUS current
DESCRIPTION
"A sessionStarted notification signifies that the agent
entity has accepted a new session.
The pcubeSeEventGenericString1 is the session
type (telnet/SSH) and client IP address."
::= { pcubeSeEvents 39 }
sessionEndedTrap NOTIFICATION-TYPE
OBJECTS { pcubeSeEventGenericString1 }
STATUS current
DESCRIPTION
"A sessionEnded notification signifies that the agent
entity has detected end of a session.
The pcubeSeEventGenericString1 is the session
type (telnet/SSH) and client IP address."
::= { pcubeSeEvents 40 }
sessionDeniedAccessTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A sessionDeniedAccess notification signifies that the agent
entity has refused a session from unauthorized source.
The pcubeSeEventGenericString1 is the session type
(telnet/SSH) and client IP address."
::= { pcubeSeEvents 41 }
sessionBadLoginTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A sessionBadLogin notification signifies that the agent
entity has detected attempt to login with a wrong
password. The pcubeSeEventGenericString1
is the session type (telnet/SSH) and client IP address."
::= { pcubeSeEvents 42 }
illegalSubscriberMappingTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
pcubeSeEventGenericString1 }
STATUS current
DESCRIPTION
"A illegalSubscriberMappingTrap notification signifies that
some external entity has attempted to create illegal or
inconsistent subscriber mappings.
The pcubeSeEventGenericString1 contains a message
describing the problem."
::= { pcubeSeEvents 43 }
-- traps added to SCos 3.0
loggerLineAttackLogFullTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Signifies that the agent entity has detected
the line-attack log file is full. In such case the
agent entity rolls to the next file."
::= { pcubeSeEvents 44 }
vasServerOpertionalStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { pmoduleIndex,
vasServerIndex,
vasServerId,
vasServerOperStatus }
STATUS current
DESCRIPTION
"Signifies that the agent entity has detected
that the vas server operational status has changed."
::= { pcubeSeEvents 45 }
-- TI feature for detecting intruders.
pullRequestNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used only for traps to signify the number of pull
requests issued so far for the anonymous subscriber given in
the pullRequestRetryFailedTrap containing notification.
A direct get will always returns 0."
::= { pcubeSeEvents 46 }
pullRequestRetryFailedTrap NOTIFICATION-TYPE
OBJECTS { pcubeSeEventGenericString1,
pullRequestNumber }
STATUS current
DESCRIPTION
"Signifies that an unknown subscriber
wasn't identified after a certain number of pull
requests. The value of pcubeSeEventGenericString1 is the
subscriber id and the pullRequestNumber is the number of
pull requests made on this sub."
::= { pcubeSeEvents 47 }
-- traps added in SCOS 3.0.3
mplsVpnTotalHWMappingsThresholdExceededTrap NOTIFICATION-TYPE
OBJECTS { mplsVpnCurrentHWMappings}
STATUS current
DESCRIPTION
"Sent when the value of mplsVpnCurrentHWMappings
exceeds the allowed threshold."
::= { pcubeSeEvents 48 }
--Compliances
pcubeCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"A compliance statement defined in this MIB module,
for SCE SNMP agents. with old deprectated groups.
This compliance includes deprecated groups."
-- In general every SCE agent should implement all the groups below.
--Each group aggregates a basic functionality of the SCE.
MODULE -- this module
MANDATORY-GROUPS {
pcubeSystemGroup,
pcubeChassisGroup,
pcuebModuleGroup,
pcubeLinkGroup,
pcubeDiskGroup,
pcubeRdrFormatterGroup,
pcubeLoggerGroup,
pcubeSubscribersGroup,
pcubeTrafficProcessorGroup,
pcubePortGroup,
pcubeTxQueuesGroup,
pcubeGlobalControllersGroup,
pcubeApplicationGroup,
pcubeTrafficCountersGroup,
pcubeAttackGroup,
pcubeVasTrafficForwardingGroup,
pcubeTrapObjectsGroup,
pcubeMplsVpnAutoLearnGroup,
pcubeSeEventsGroup }
::= { pcubeSeCompliances 1 }
pcubeComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"A compliance statement defined in this MIB module,
for SCE SNMP agents."
-- In general every SCE agent should implement all the groups below.
--Each group aggregates a basic functionality of the SCE.
MODULE -- this module
MANDATORY-GROUPS {
pcubeSystemGroup,
pcubeChassisGroup,
pcuebModuleGroup,
pcubeLinkGroup,
pcubeDiskGroup,
pcubeRdrFormatterGroup,
pcubeLoggerGroup,
pcubeSubscribersGroup,
pcubeTrafficProcessorGroup,
pcubePortGroup,
pcubeTxQueuesGroup,
pcubeGlobalControllersGroup,
pcubeApplicationGroup,
pcubeTrafficCountersGroup,
pcubeAttackGroup,
pcubeVasTrafficForwardingGroup,
pcubeTrapObjectsGroup,
pcubeMplsVpnAutoLearnGroup,
pcubeSeEventsGroupRev1 }
::= { pcubeSeCompliances 2 }
-- PcubeSEMib groups - aggregate objects with common logical relevance.
pcubeSystemGroup OBJECT-GROUP
OBJECTS { sysOperationalStatus,
sysFailureRecovery,
sysVersion }
STATUS current
DESCRIPTION
"System related inforamation."
::= { pcubeSeGroups 1 }
pcubeChassisGroup OBJECT-GROUP
OBJECTS {
pchassisSysType,
pchassisPowerSupplyAlarm,
pchassisFansAlarm,
pchassisTempAlarm,
pchassisVoltageAlarm,
pchassisNumSlots,
pchassisSlotConfig,
pchassisPsuType,
pchassisLineFeedAlarm }
STATUS current
DESCRIPTION
"Chassis related information."
::= { pcubeSeGroups 2 }
pcuebModuleGroup OBJECT-GROUP
OBJECTS {
pmoduleIndex,
pmoduleType,
pmoduleNumTrafficProcessors,
pmoduleSlotNum,
pmoduleHwVersion,
pmoduleNumPorts,
pmoduleNumLinks,
pmoduleConnectionMode,
pmoduleSerialNumber,
pmoduleUpStreamAttackFilteringTime,
pmoduleUpStreamLastAttackFilteringTime,
pmoduleDownStreamAttackFilteringTime,
pmoduleDownStreamLastAttackFilteringTime,
pmoduleAttackObjectsClearTime ,
pmoduleAdminStatus,
pmoduleOperStatus }
STATUS current
DESCRIPTION
"Module related information."
::= { pcubeSeGroups 3 }
pcubeLinkGroup OBJECT-GROUP
OBJECTS {
linkModuleIndex,
linkIndex ,
linkAdminModeOnActive ,
linkAdminModeOnFailure,
linkOperMode ,
linkStatusReflectionEnable,
linkSubscriberSidePortIndex,
linkNetworkSidePortIndex }
STATUS current
DESCRIPTION
"Link related information."
::= { pcubeSeGroups 4 }
pcubeDiskGroup OBJECT-GROUP
OBJECTS { diskNumUsedBytes,diskNumFreeBytes }
STATUS current
DESCRIPTION
"Disk related information."
::= { pcubeSeGroups 5 }
pcubeRdrFormatterGroup OBJECT-GROUP
OBJECTS {
rdrFormatterEnable,
rdrFormatterDestIPAddr,
rdrFormatterDestPort,
rdrFormatterDestPriority,
rdrFormatterDestStatus,
rdrFormatterDestConnectionStatus,
rdrFormatterDestNumReportsSent,
rdrFormatterDestNumReportsDiscarded,
rdrFormatterDestReportRate,
rdrFormatterDestReportRatePeak,
rdrFormatterDestReportRatePeakTime,
rdrFormatterNumReportsSent,
rdrFormatterNumReportsDiscarded,
rdrFormatterClearCountersTime,
rdrFormatterReportRate,
rdrFormatterReportRatePeak,
rdrFormatterReportRatePeakTime,
rdrFormatterProtocol,
rdrFormatterForwardingMode,
rdrFormatterCategoryDestPriority,
rdrFormatterCategoryDestStatus,
rdrFormatterCategoryIndex,
rdrFormatterCategoryName,
rdrFormatterCategoryNumReportsSent,
rdrFormatterCategoryNumReportsDiscarded,
rdrFormatterCategoryReportRate,
rdrFormatterCategoryReportRatePeak,
rdrFormatterCategoryReportRatePeakTime,
rdrFormatterCategoryNumReportsQueued }
STATUS current
DESCRIPTION
"RDR-Formatter related information."
::= { pcubeSeGroups 6 }
pcubeLoggerGroup OBJECT-GROUP
OBJECTS {
loggerUserLogEnable,
loggerUserLogNumInfo,
loggerUserLogNumWarning,
loggerUserLogNumError,
loggerUserLogNumFatal,
loggerUserLogClearCountersTime }
STATUS current
DESCRIPTION
"Logger related information."
::= { pcubeSeGroups 7 }
pcubeSubscribersGroup OBJECT-GROUP
OBJECTS {
subscribersNumIntroduced,
subscribersNumFree ,
subscribersNumIpAddrMappings,
subscribersNumIpAddrMappingsFree ,
subscribersNumIpRangeMappings ,
subscribersNumIpRangeMappingsFree,
subscribersNumVlanMappings ,
subscribersNumVlanMappingsFree ,
subscribersNumActive,
subscribersNumActivePeak,
subscribersNumActivePeakTime,
subscribersNumUpdates,
subscribersCountersClearTime,
subscribersNumTpIpRanges,
subscribersNumTpIpRangesFree,
subscribersNumAnonymous ,
subscribersNumWithSessions,
spIndex,
spName,
spType,
spvSubName,
spvPropertyName,
spvRowStatus,
spvPropertyStringValue,
spvPropertyUintValue,
spvPropertyCounter64Value }
STATUS current
DESCRIPTION
"Subscriber related information."
::= { pcubeSeGroups 8 }
pcubeTrafficProcessorGroup OBJECT-GROUP
OBJECTS {
tpModuleIndex,
tpIndex,
tpTotalNumHandledPackets,
tpTotalNumHandledFlows,
tpNumActiveFlows ,
tpNumActiveFlowsPeak ,
tpNumActiveFlowsPeakTime ,
tpNumTcpActiveFlows ,
tpNumTcpActiveFlowsPeak ,
tpNumTcpActiveFlowsPeakTime,
tpNumUdpActiveFlows,
tpNumUdpActiveFlowsPeak,
tpNumUdpActiveFlowsPeakTime ,
tpNumNonTcpUdpActiveFlows,
tpNumNonTcpUdpActiveFlowsPeak ,
tpNumNonTcpUdpActiveFlowsPeakTime ,
tpTotalNumBlockedPackets,
tpTotalNumBlockedFlows,
tpTotalNumDiscardedPacketsDueToBwLimit ,
tpTotalNumWredDiscardedPackets ,
tpTotalNumFragments,
tpTotalNumNonIpPackets,
tpTotalNumIpCrcErrPackets,
tpTotalNumIpLengthErrPackets,
tpTotalNumIpBroadcastPackets,
tpTotalNumTtlErrPackets,
tpTotalNumTcpUdpCrcErrPackets,
tpClearCountersTime,
tpHandledPacketsRate,
tpHandledPacketsRatePeak,
tpHandledPacketsRatePeakTime,
tpHandledFlowsRate,
tpHandledFlowsRatePeak,
tpHandledFlowsRatePeakTime,
tpCpuUtilization,
tpCpuUtilizationPeak,
tpCpuUtilizationPeakTime,
tpFlowsCapacityUtilization,
tpFlowsCapacityUtilizationPeak,
tpFlowsCapacityUtilizationPeakTime,
tpServiceLoss }
STATUS current
DESCRIPTION
"Traffic processors related information."
::= { pcubeSeGroups 9 }
pcubePortGroup OBJECT-GROUP
OBJECTS {
pportModuleIndex,
pportIndex,
pportType,
pportNumTxQueues,
pportIfIndex,
pportAdminSpeed,
pportAdminDuplex,
pportOperDuplex,
pportLinkIndex,
pportOperStatus }
STATUS current
DESCRIPTION
"Ports related information."
::= { pcubeSeGroups 10 }
pcubeTxQueuesGroup OBJECT-GROUP
OBJECTS {
txQueuesModuleIndex,
txQueuesPortIndex,
txQueuesQueueIndex,
txQueuesDescription,
txQueuesBandwidth,
txQueuesUtilization,
txQueuesUtilizationPeak,
txQueuesUtilizationPeakTime,
txQueuesClearCountersTime,
txQueuesDroppedBytes }
STATUS current
DESCRIPTION
"Tx queue related information"
::= { pcubeSeGroups 11 }
pcubeGlobalControllersGroup OBJECT-GROUP
OBJECTS {
globalControllersModuleIndex,
globalControllersPortIndex,
globalControllersIndex,
globalControllersDescription,
globalControllersBandwidth,
globalControllersUtilization,
globalControllersUtilizationPeak,
globalControllersUtilizationPeakTime ,
globalControllersClearCountersTime,
globalControllersDroppedBytes }
STATUS current
DESCRIPTION
"Global controllers related information."
::= { pcubeSeGroups 12 }
pcubeApplicationGroup OBJECT-GROUP
OBJECTS {
appName,
appDescription,
appVersion,
apIndex,
apName,
apType,
apvPropertyName,
apvRowStatus,
apvPropertyStringValue,
apvPropertyUintValue,
apvPropertyCounter64Value }
STATUS current
DESCRIPTION
"Application related information."
::= { pcubeSeGroups 13 }
pcubeTrafficCountersGroup OBJECT-GROUP
OBJECTS {
trafficCounterIndex,
trafficCounterValue,
trafficCounterName,
trafficCounterType }
STATUS current
DESCRIPTION
"Traffic counter related information."
::= { pcubeSeGroups 14 }
pcubeAttackGroup OBJECT-GROUP
OBJECTS {
attackTypeIndex,
attackTypeName,
attackTypeCurrentNumAttacks,
attackTypeTotalNumAttacks,
attackTypeTotalNumFlows,
attackTypeTotalNumSeconds }
STATUS current
DESCRIPTION
"Attacks related information."
::= { pcubeSeGroups 15 }
pcubeVasTrafficForwardingGroup OBJECT-GROUP
OBJECTS {
vasServerIndex,
vasServerId,
vasServerAdminStatus,
vasServerOperStatus }
STATUS current
DESCRIPTION
"VAS traffic forwarding related
information."
::= { pcubeSeGroups 16 }
pcubeMplsVpnAutoLearnGroup OBJECT-GROUP
OBJECTS { mplsVpnMaxHWMappings,
mplsVpnCurrentHWMappings }
STATUS current
DESCRIPTION
"MPLS VPN auto learning related
information."
::= { pcubeSeGroups 17 }
pcubeTrapObjectsGroup OBJECT-GROUP
OBJECTS {
pcubeSeEventGenericString1,
pcubeSeEventGenericString2,
pullRequestNumber }
STATUS current
DESCRIPTION
"Notifications' objects group."
::= { pcubeSeGroups 18 }
END
Reference in New Issue View Git Blame Copy Permalink