MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/LANOPTICS-RING-MANAGER-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1021 lines
27 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- L A N O P T I C S - R I N G - M A N A G E R - M I B . m y
--
-- March 1996, Keith Horil
--
-- Copyright (c) 1996 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was developed by LanOptics
LANOPTICS-RING-MANAGER-MIB DEFINITIONS ::= BEGIN
-- MIB II Definitions for Ring Manager Option
IMPORTS
OBJECT-TYPE
FROM RFC-1212
enterprises, Counter, IpAddress
FROM RFC1155-SMI
DisplayString, PhysAddress
FROM RFC1213-MIB;
BITMAP ::= INTEGER
RING-CONFIGURATION ::= OCTET STRING
lanOptics OBJECT IDENTIFIER ::= { enterprises 224 }
lanOpticsDot5Monitor OBJECT IDENTIFIER ::= { lanOptics 5 }
-- This extension will implement some of RFC1231 for the
-- Management module in the Hub if Token-Ring is installed.
rmServerReportingTo OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This gives the IP address for the reporting manager."
::= { lanOpticsDot5Monitor 1 }
rmRingStatus OBJECT-TYPE
SYNTAX INTEGER {
-- normal (0) ,
beaconing (1) ,
single-station (2) ,
errors-increasing (3) ,
excessive-errors (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the curent ring status."
::= { lanOpticsDot5Monitor 2 }
rmServerHealthText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable describes the status of the ring
server in a textural manner."
::= { lanOpticsDot5Monitor 3 }
rmServerHealth OBJECT-TYPE
SYNTAX INTEGER {
-- normal (0) ,
initial-State (1) ,
not-Active (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will describe the status of the ring
server."
::= { lanOpticsDot5Monitor 4 }
rmRingEventInLog OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of events currently in the internal
event log."
::= { lanOpticsDot5Monitor 5 }
rmRingEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmRingEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing the last events.
The detailed structure is TBD."
::= { lanOpticsDot5Monitor 6 }
rmRingEventEntry OBJECT-TYPE
SYNTAX RmRingEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing one event.
The index into the table is the event number (32 bits int),
where each byte represented by an index digit."
INDEX { INTEGER , INTEGER , INTEGER , INTEGER }
::= { rmRingEventTable 1 }
RmRingEventEntry ::= SEQUENCE{
rmRingEvent
OCTET STRING
}
rmRingEvent OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the data structure
describing a ring event in an internal format"
::= { rmRingEventEntry 1 }
rmRingBeaconingStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the data structure
describing the beaconing state of the ring."
::= { lanOpticsDot5Monitor 7 }
rmRingIsoErrorStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the data structure
describing the isolating error state of the ring."
::= { lanOpticsDot5Monitor 8 }
rmRingSingleStationStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the data structure
describing the single station state of the ring."
::= { lanOpticsDot5Monitor 9 }
rmRingFullConfiguration OBJECT-TYPE
SYNTAX RING-CONFIGURATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable gives the ring configuration as
known to the server. Each MAC address is represented by 6
bytes. The direction is up-stream."
::= { lanOpticsDot5Monitor 10 }
rmRingConfigurationUpdate OBJECT-TYPE
SYNTAX RING-CONFIGURATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give a sequence of changes in the
ring configuration for the monitored ring."
::= { lanOpticsDot5Monitor 11 }
rmServerInitProcess OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable will initialize the server (reset the
management module)."
::= { lanOpticsDot5Monitor 12 }
rmServerAdminState OBJECT-TYPE
SYNTAX BITMAP
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable will indicate administrative status
of the server.
IDLE - 0
The bit # (LSB = 0):
REM - bit 0 on
CRS - bit 1 on
RPS - bit 2 on
LBS - bit 3 on"
::= { lanOpticsDot5Monitor 13 }
rmServerOperatingState OBJECT-TYPE
SYNTAX BITMAP
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will indicate operating status of
the server:
IDLE - all 0
The bit # (LSB = 0):
REM - bit 0 on
CRS - bit 1 on
RPS - bit 2 on
LBS - bit 3 on"
::= { lanOpticsDot5Monitor 14 }
rmServerAdminParameters OBJECT-TYPE
SYNTAX BITMAP
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The required bit per event disabled/enabled.
The bit # (LSB = 0):
Nullevent(0),
Nodenoresponseevent(1),
Pollprocessfailevent(2),
Criticnodejoinedringevent(3),
Noderemovedevent(4),
Activemonitorerrorevent(5),
Newactivemonitorevent(6),
Naunchangeevent(7),
Claimtokenevent(8),
Ringpurgeevent(9),
Activemonitorpresentevent(10),
Standbymonitorpresentevent(11),
Softerrorreportevent(12),
Ringstatusevent(13),
Congestthresholdexccededevent(14),
Congestthresholdendedevent(15),
Nonisolatingthresholdexccededevent(16),
Impendthresholdexccededevent(17),
Excessivethresholdexcededevent(18),
Errorratedecayevent(19),
Adaptererrorevent(20),
Responseevent(21),
Pollprocessevent(22),
Beaconevent(23),
Nodeleftringevent(24),
Nodejoinedringevent(25),
Criticnodeleftringevent(26)"
::= { lanOpticsDot5Monitor 15 }
rmServerOperatingParameters OBJECT-TYPE
SYNTAX BITMAP
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The required bit per event disabled/enabled.
The bit # (LSB = 0):
Nullevent(0),
Nodenoresponseevent(1),
Pollprocessfailevent(2),
Criticnodejoinedringevent(3),
Noderemovedevent(4),
Activemonitorerrorevent(5),
Newactivemonitorevent(6),
Naunchangeevent(7),
Claimtokenevent(8),
Ringpurgeevent(9),
Activemonitorpresentevent(10),
Standbymonitorpresentevent(11),
Softerrorreportevent(12),
Ringstatusevent(13),
Congestthresholdexccededevent(14),
Congestthresholdendedevent(15),
Nonisolatingthresholdexccededevent(16),
Impendthresholdexccededevent(17),
Excessivethresholdexcededevent(18),
Errorratedecayevent(19),
Adaptererrorevent(20),
Responseevent(21),
Pollprocessevent(22),
Beaconevent(23),
Nodeleftringevent(24),
Nodejoinedringevent(25),
Criticnodeleftringevent(26)"
::= { lanOpticsDot5Monitor 16 }
rmDeviceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing device parameters and
configuration."
::= { lanOpticsDot5Monitor 17 }
rmDeviceEntry OBJECT-TYPE
SYNTAX RmDeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry containing device parameters and
configuration.
The index to the table is the MAC address of
the device."
INDEX { rmDeviceMacAddress }
::= { rmDeviceStatusTable 1 }
RmDeviceEntry ::= SEQUENCE{
rmDeviceMacAddress
PhysAddress,
rmDeviceUpstream
PhysAddress,
rmDeviceAdminState
INTEGER,
rmDeviceOperateState
INTEGER,
rmDevicePhysLocation
INTEGER,
rmDeviceGroupAddress
INTEGER,
rmDeviceFunctionAddress
INTEGER,
rmDeviceProductID
OCTET STRING,
rmDeviceStationID
INTEGER,
rmDeviceStationStatus
OCTET STRING,
rmDeviceFunctionClass
INTEGER,
rmDeviceAccessPriority
INTEGER,
rmDeviceMicroLevel
OCTET STRING,
rmDeviceMonitored
INTEGER,
rmDeviceDaysAllowed
INTEGER,
rmDeviceHoursAllowed
INTEGER
}
rmDeviceMacAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 1 }
rmDeviceUpstream OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 2 }
rmDeviceAdminState OBJECT-TYPE
SYNTAX INTEGER {
removed (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The required state of the adapter.
- only removed is supported."
::= { rmDeviceEntry 3 }
rmDeviceOperateState OBJECT-TYPE
SYNTAX INTEGER {
open (1),
closed (2),
removed (4),
neverInserted (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The operating state of the adapter."
::= { rmDeviceEntry 4 }
rmDevicePhysLocation OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 5 }
rmDeviceGroupAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 6 }
rmDeviceFunctionAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 7 }
rmDeviceProductID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 8 }
rmDeviceStationID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 9 }
rmDeviceStationStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 10 }
rmDeviceFunctionClass OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 11 }
rmDeviceAccessPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 12 }
rmDeviceMicroLevel OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 13 }
rmDeviceMonitored OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 14 }
rmDeviceDaysAllowed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 15 }
rmDeviceHoursAllowed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
::= { rmDeviceEntry 16 }
rmRingPollProcessStatus OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the data structure
describing the poll process status of the ring."
::= { lanOpticsDot5Monitor 18 }
-- variables 18 to 34 are currently not supported
--
-- rmRingIsoImpendingThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the isolating soft error
--mpending threshold."
-- ::= { lanOpticsDot5Monitor 19 }
--
-- rmRingIsoExcessiveThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the isolating soft error
--xcessive threshold."
-- ::= { lanOpticsDot5Monitor 20 }
--
-- rmRingIsoDecrementValue OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the isolating soft error
--ecrement value."
-- ::= { lanOpticsDot5Monitor 21 }
--
-- rmRingIsoDecrementInterval OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the isolating soft error
--ecrement time interval."
-- ::= { lanOpticsDot5Monitor 22 }
--
-- rmRingCongestionTabThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the Congestion
--hreshold."
-- ::= { lanOpticsDot5Monitor 23 }
--
-- rmRingLostFramesThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--ost frames soft error threshold."
-- ::= { lanOpticsDot5Monitor 24 }
--
-- rmRingReceiveCongestThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--eceiver congestion soft error threshold."
-- ::= { lanOpticsDot5Monitor 25 }
--
-- rmRingFrameCopiedErrorThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--rame copied error soft error threshold."
-- ::= { lanOpticsDot5Monitor 26 }
--
-- rmRingFrequencyErrorThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--requency error soft error threshold."
-- ::= { lanOpticsDot5Monitor 27 }
--
-- rmRingTokenErrorThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--oken error soft error threshold."
-- ::= { lanOpticsDot5Monitor 28 }
--
-- rmRingIsoTabFullThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--so table full error threshold."
-- ::= { lanOpticsDot5Monitor 29 }
--
-- rmRingMinDecrementThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--inimum decrement error soft error threshold."
-- ::= { lanOpticsDot5Monitor 30 }
--
-- rmRingCongestTabFullThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--ongestion table full error threshold."
-- ::= { lanOpticsDot5Monitor 31 }
--
-- rmServerMacBufFullThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the non isolating
--AC addresses buffer full error threshold."
-- ::= { lanOpticsDot5Monitor 32 }
--
-- rmRingStatusBufFullThreshold OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the status change
--uffer full threshold."
-- ::= { lanOpticsDot5Monitor 33 }
--
-- rmServerSoftwareVersion OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the software version
--f the server."
-- ::= { lanOpticsDot5Monitor 34 }
--
rmRingNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the local ring number."
::= { lanOpticsDot5Monitor 35 }
rmRingSoftErrorTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the ring soft
error timer (in units of 10 milliseconds)."
::= { lanOpticsDot5Monitor 36 }
rmRingIsolatingTab OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the ring isolating table."
::= { lanOpticsDot5Monitor 37 }
rmRingCongestTab OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the ring congestion table."
::= { lanOpticsDot5Monitor 38 }
rmRingNonIsolatingTab OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the ring non isolating
table."
::= { lanOpticsDot5Monitor 39 }
-- variables 40 - 41 currently not supported
-- rmRingExcToNormal OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the ring excessive to
--ormal threshold."
-- ::= { lanOpticsDot5Monitor 40 }
--
-- rmRingImpToNormal OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
--This variable will give the ring impending to
--ormal threshold."
-- ::= { lanOpticsDot5Monitor 41 }
rmRingAutoRemove OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable will enable/disable auto removal of
a node when the isolating threshold is exceeded or
the congestion threshold is exceeded."
::= { lanOpticsDot5Monitor 42 }
rmRingAllowedDaysPartition1 OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is the first partition in the
days time exis.
The partitions define ranges in units of
days in which some device are allowed
to enter the ring and some are not."
::= { lanOpticsDot5Monitor 43 }
rmRingAllowedDaysPartition2 OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is the second partition in the
days time exis.
The partitions define ranges in units of
days in which some devices
are allowed to enter the ring and some are not.
The value should be higher than Partition1"
::= { lanOpticsDot5Monitor 44 }
rmRingAllowedHoursPartition1 OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is the first partition in the
hours time exis.
The partitions define ranges in units of
hours (1-24 hours) in which some devices
are allowed to enter the ring and some are not."
::= { lanOpticsDot5Monitor 45 }
rmRingAllowedHoursPartition2 OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is the second partition in the
hours time exis.
The partitions define ranges in units of
hours (1-24 hours) in which some devices
are allowed to enter the ring and some are not.
The value should be higher than Partition1."
::= { lanOpticsDot5Monitor 46 }
rmServerPowerOn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable indicates if the server is powered
on since the last poll."
::= { lanOpticsDot5Monitor 47 }
-- Token-ring related alerts data
rmTRLastErrorClass OBJECT-TYPE
SYNTAX INTEGER{
-- no-error(0),
adapter-error(1),
beaconing(2),
iso-increasing (3),
iso-excessive (4),
iso-decay (5),
congestion (6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var contains the error class of the last
Token-Ring error reported by the agent."
::= { lanOpticsDot5Monitor 48 }
rmTRLastErrorType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var contains the error type of the last
Token-Ring error, depending on the error class"
::= { lanOpticsDot5Monitor 49 }
rmTRFaultDomainNode1 OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var contains the MAC address of the first
node in the last error fault domain."
::= { lanOpticsDot5Monitor 50 }
rmTRFaultDomainNode2 OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var contains the MAC address of the second
node in the last error fault domain."
::= { lanOpticsDot5Monitor 51 }
-- Token ring events counters
rmIsoTresholdExceededCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number that Isloating Treshold
has been exceeded (exessive error status of the ring)
since the agent is up or reset."
::= { lanOpticsDot5Monitor 52 }
rmNonIsoTresholdExceededCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number that Non Isloating Treshold
has been exceeded since the agent is up."
::= { lanOpticsDot5Monitor 53 }
rmCongestionTresholdExceededCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number that Congestion Treshold
has been exceeded since the agent is up."
::= { lanOpticsDot5Monitor 54 }
rmBeaconCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Beacons
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 55 }
rmSpareCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Counter for future use"
::= { lanOpticsDot5Monitor 56 }
rmPurgeCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of ring Purges
since the agent is up."
::= { lanOpticsDot5Monitor 57 }
rmClaimCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Token Claims
since the agent is up."
::= { lanOpticsDot5Monitor 58 }
rmAdapterResetCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of times the agent adapter
has to reset itself since the agent is up."
::= { lanOpticsDot5Monitor 59 }
rmLostFramesCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Lost Frames events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 60 }
rmCongestionCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Congestion events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 61 }
rmFrameCopyCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Frame Copy events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 62 }
rmFrequencyErrorCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Frequency Error events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 63 }
rmTokenCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Token error events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 64 }
rmLineCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Line error events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 65 }
rmInternalCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Internal error events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 66 }
rmBurstCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Burst error events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 67 }
rmARIFCICounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of ARI/FCI events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 68 }
rmAbortCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Abort events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 69 }
rmPollFailCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of Poll Failed events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 70 }
rmNoResponseCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts the total number of No Response events
for the whole ring since the agent is up."
::= { lanOpticsDot5Monitor 71 }
rmWholeRingCounters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This var counts a list of all the above counters (52-71) for
convenience. Each counter occupies 32 bits of this
structure in the order of the related variables.
For internal use only."
::= { lanOpticsDot5Monitor 72 }
rmResetOldDevicesSetup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This var resets existing agent setup for all devices, e.g:
monitored, not-allowed, etc."
::= { lanOpticsDot5Monitor 73 }
rmResetErrorCounters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This var resets existing agent error counters."
::= { lanOpticsDot5Monitor 74 }
rmSetCurrentTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This var sets the current time (for security settings).
The time is the number of seconds elapsed since midnight,
December 31, 1899. "
::= { lanOpticsDot5Monitor 75 }
rmRingFirstSplitConfiguration OBJECT-TYPE
SYNTAX RING-CONFIGURATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the first part of the ring
configuration upto 256 bytes including header
(for agents with limited buffer for a single octet).
Retrieving this variable and several 'nexts'
enables to compose the whole ring configuration."
::= { lanOpticsDot5Monitor 76 }
rmRingNextSplitConfiguration OBJECT-TYPE
SYNTAX RING-CONFIGURATION
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable will give the next part of the ring configuration
relating to rmRingFirstSplitConfiguration or previous variable
of this type. Upto 256 bytes are given
(for agents with limited buffer for a single octet).
See previous variable for more details."
::= { lanOpticsDot5Monitor 77 }
END
Reference in New Issue View Git Blame Copy Permalink