snmp_mib_archive/GENERICOBJECT-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

118 lines
3.4 KiB
Plaintext

-- *****************************************************************
-- Generic Object MIB
--
-- June 2002
--
-- Copyright (c) 1996-2001, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- LAST-UPDATED "200206180000Z"
-- DESCRIPTION
-- "This MIB Contains objects used in traps.
-- These objects are sent in traps with the values
-- applicable for objects defined elsewhere. The SNMP
-- operations on these objects may not be meaningful
-- or SNMP operations may not be supported."
--
-- REVISION "200206180000Z"
-- DESCRIPTION
-- CONTACT-INFO
-- " Cisco Systems
-- Customer Service
--
-- Postal: 170 W Tasman Drive
-- San Jose, CA 95134
-- USA
--
-- Tel: +1 800 553-NETS
--
-- E-mail: cs-wanatm@cisco.com"
-- "
--
GENERICOBJECT-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
cardGeneric FROM BASIS-MIB;
genericObjects OBJECT IDENTIFIER ::= { cardGeneric 8}
genericLineNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the generic line number used in traps. This object
cannot be set or read. This object may refer to a T1, T3
or X21 line. (It is a proxy for other objects lineNum,
dsx3LineNum and x21LineNum).
Currently, the ranges are
T1/E1 1..56
T3/E3 1..3
X21 1..4
"
::= { genericObjects 1}
genericLineType OBJECT-TYPE
SYNTAX INTEGER {
-- T1/E1 line types. Refer to the MIB object
-- lineType for details regarding the types below.
dsx1ESF(1),
dsx1D4(2),
dsx1E1(3),
dsx1E1CRC(4),
dsx1E1MF(5),
dsx1E1CRC-MF(6),
dsx1E1clearchannel(7),
-- T3/E3 line types. Refer to the MIB object
-- dsx3LineType for details regarding the types below.
dsx3CbitParity(51),
dsx3g832-g804(52),
dsx3m13mode(53),
dsx3g751(54),
dsx3Unframed(55),
e3Unframed(56),
-- HSSI line types. Refer to the MIB object
-- x21LineType for details regarding the types below.
x21dte(101),
x21dce(102),
-- Sonet line types. Refer to the MIB object
-- sonetLineType for details regarding the types below.
sonetSts3c(151),
sonetStm1(152),
sonetSts12c(153),
sonetStm4(154)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the generic line type used in traps. This object
cannot be set or read. Depending on the value, this object
may refer to a T1, T3 or X21 line type.
It is a proxy for other objects lineType, dsx3LineType and
x21LineType.
"
::= { genericObjects 2}
genericTimeStamp OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..30))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the generic time stamp used in traps. This object
cannot be set or read. This object will be used by all new
traps to tell the time that a given trap was originated.
"
::= { genericObjects 3}
END