MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/DOCS-QOS-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

3056 lines
121 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- DOCS-QOS-MIB.my: Docsis QOS Extensions MIB file
--
-- April 2000, Minnie Lu
--
-- Copyright (c) 2000-2004, 2006-2008 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--
-- The contents is from draft-ietf-ipcdn-qos-mib-06.txt
--
-- Docsis QOS Extensions MIB
--
DOCS-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress,
RowStatus,
TruthValue,
DisplayString,
TimeStamp
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
ifIndex,
InterfaceIndex
FROM IF-MIB
docsIfMib
FROM DOCS-IF-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB;
docsQosMIB MODULE-IDENTITY
LAST-UPDATED "200111090000Z" -- November 9, 2001
ORGANIZATION "IETF IPCDN Working Group"
CONTACT-INFO
"
Co-Author: Michael Patrick
Postal: Motorola ISG
20 Cabot Blvd, MS M4-30
Mansfield, MA 02048-1193
U.S.A.
Phone: +1 508 261 5707
E-mail: michael.patrick@motorola.com
Co-Author: William Murwin
Postal: Motorola BCS
20 Cabot Blvd, MS M4-25
Mansfield, MA 02048-1193
U.S.A.
Phone: +1 508 261 5578
E-mail: w.murwin@motorola.com"
DESCRIPTION
"This is the management information for
Quality Of Service (QOS) for DOCSIS 1.1."
REVISION "200111090000Z" -- November 9, 2001
DESCRIPTION
"Published as draft-ietf-ipcdn-qos-mib-06.txt.
Changes from qos-mib-05 include:
-Deprecated objects that were of type IpAddress
and added new objects that were of type
InetAddressType and InetAddress, to support both
IPv4 and IPv6 in the docsQosPktClassTable.
-Clarified the default value of the
docsQosPktClassIpDestMask and
docsQosPktClassIpSourceMask.
-Corrected the description of the individual bits
that make up the docsQosParamsSetRequestPolicyOct.
-Corrected the spelling of docsCableMaclayer in the
description of the docsQosServiceFlowLogIfIndex.
-Clarified that some of counters from the
docsQosDynamicServiceStatsTable, include retries.
-Changed references to the latest Data-Over-Cable
Service Interface Specifications: Radio Frequency
Interface Specification.
-Added objects that were removed from earlier
revisions of the mib, as obsolete.
-Clarified the Cable Modem's implementation of the
docsQosParamSetTosAndMask.
-Change the description of objects within the
docsQosServiceClassTable, so that they were no longer
templates for obsolete objects.
"
::= { docsIfMib 7 } -- BPIPlus mib is docsIfMIb 6
docsQosMIBObjects OBJECT IDENTIFIER ::= { docsQosMIB 1 }
-- Textual Conventions
IfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Indicates a direction on an RF MAC interface.
The value downstream(1) is from Cable Modem
Termination System to Cable Modem.
The value upstream(2) is from Cable Modem to
Cable Modem Termination System."
SYNTAX INTEGER {
downstream(1),
upstream(2)
}
BitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "The rate of traffic in unit of bits per second.
Used to specify traffic rate for QOS."
SYNTAX Unsigned32
SchedulingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The scheduling service provided by a CMTS for an
upstream service flow. If the parameter is omitted
from an upstream QOS Parameter Set, this object takes
the value of bestEffort (2). This parameter must be
reported as undefined (1) for downstream QOS Parameter
Sets."
SYNTAX INTEGER {
undefined (1),
bestEffort (2),
nonRealTimePollingService(3),
realTimePollingService(4),
unsolictedGrantServiceWithAD(5),
unsolictedGrantService(6)
}
-----------------------------------------------------------------------
--
-- Packet Classifier Table
--
docsQosPktClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
"
::= { docsQosMIBObjects 1 }
docsQosPktClassEntry OBJECT-TYPE
SYNTAX DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in this table provides a single packet
classifier rule. The index ifIndex is an ifType
of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId,
docsQosPktClassId
}
::= { docsQosPktClassTable 1 }
DocsQosPktClassEntry ::= SEQUENCE {
docsQosPktClassId Integer32,
docsQosPktClassDirection IfDirection,
docsQosPktClassPriority Integer32,
docsQosPktClassIpTosLow OCTET STRING,
docsQosPktClassIpTosHigh OCTET STRING,
docsQosPktClassIpTosMask OCTET STRING,
docsQosPktClassIpProtocol Integer32,
docsQosPktClassIpSourceAddr IpAddress,
docsQosPktClassIpSourceMask IpAddress,
docsQosPktClassIpDestAddr IpAddress,
docsQosPktClassIpDestMask IpAddress,
docsQosPktClassSourcePortStart Integer32,
docsQosPktClassSourcePortEnd Integer32,
docsQosPktClassDestPortStart Integer32,
docsQosPktClassDestPortEnd Integer32,
docsQosPktClassDestMacAddr MacAddress,
docsQosPktClassDestMacMask MacAddress,
docsQosPktClassSourceMacAddr MacAddress,
docsQosPktClassEnetProtocolType INTEGER,
docsQosPktClassEnetProtocol Integer32,
docsQosPktClassUserPriApplies TruthValue,
docsQosPktClassUserPriLow Integer32,
docsQosPktClassUserPriHigh Integer32,
docsQosPktClassVlanId Integer32,
docsQosPktClassState INTEGER,
docsQosPktClassPkts Counter32,
docsQosPktClassBitMap BITS,
docsQosPktClassInetSourceAddrType InetAddressType,
docsQosPktClassInetSourceAddr InetAddress,
docsQosPktClassInetSourceMaskType InetAddressType,
docsQosPktClassInetSourceMask InetAddress,
docsQosPktClassInetDestAddrType InetAddressType,
docsQosPktClassInetDestAddr InetAddress,
docsQosPktClassInetDestMaskType InetAddressType,
docsQosPktClassInetDestMask InetAddress
}
docsQosPktClassId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index assigned to packet classifier entry by
the CMTS which is unique per service flow."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.3.2"
::= { docsQosPktClassEntry 1 }
docsQosPktClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the direction to which the classifier
is applied."
::= { docsQosPktClassEntry 2 }
docsQosPktClassPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value specifies the order of evaluation
of the classifiers.
The higher the value the higher the priority.
The value of 0 is used as default in
provisioned service flows classifiers.
The default value of 64 is used for dynamic
service flow classifiers.
If the referenced parameter is not present
in a classifier, this object reports the default value
as defined above."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.3.5"
::= { docsQosPktClassEntry 3 }
docsQosPktClassIpTosLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The low value of a range of TOS byte values.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 4 }
docsQosPktClassIpTosHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The 8-bit high value of a range of TOS byte
values.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 5 }
docsQosPktClassIpTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mask value is bitwise ANDed with TOS byte
in an IP packet and this value is used check
range checking of TosLow and TosHigh.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 6 }
docsQosPktClassIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..258)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the value of the IP
Protocol field required for IP packets to match
this rule.
The value 256 matches traffic with any IP Protocol
value. The value 257 by convention matches both TCP
and UDP.
If the referenced parameter is not present
in a classifier, this object reports the value of 258."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.2"
::= { docsQosPktClassEntry 7 }
docsQosPktClassIpSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "This object is deprecated in favor of the
object pair docsQosPktClassInetSourceAddrType
and docsQosPktClassInetSourceAddr. Agents that
choose to implement this object MUST report
an address that matches docsQosPktClassInetSourceAddr
object as long as docsQosPktClassInetSourceAddrType is
ipv4(1). Otherwise, the value of this object shall be
0.0.0.0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.3"
::= { docsQosPktClassEntry 8 }
docsQosPktClassIpSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "This object is deprecated in favor of the
object pair docsQosPktClassInetSourceMaskType
and docsQosPktClassInetSourceMask. Agents that
choose to implement this object MUST report
an address that matches docsQosPktClassInetSourceMask
object as long as docsQosPktClassInetSourceMaskType is
ipv4(1). Otherwise, the value of this object shall be
255.255.255.255.
SNMP mangers should note that agent implementation
of previous versions of this MIB report 0.0.0.0 as the
value when the reference parameter is not present,
rather than 255.255.255.255."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.4"
::= { docsQosPktClassEntry 9 }
docsQosPktClassIpDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "This object is deprecated in favor of the
object pair docsQosPktClassInetDestAddrType
and docsQosPktClassInetDestAddr. Agents that
choose to implement this object MUST report
an address that matches docsQosPktClassInetDestAddr
object as long as docsQosPktClassInetDestAddrType is
ipv4(1). Otherwise, the value of this object shall be
0.0.0.0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.5"
::= { docsQosPktClassEntry 10 }
docsQosPktClassIpDestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "This object is deprecated in favor of the
object pair docsQosPktClassInetDestMaskType
and docsQosPktClassInetDestMask. Agents that
choose to implement this object MUST report
an address that matches docsQosPktClassInetDestMask
object as long as docsQosPktClassInetDestMaskType is
ipv4(1). Otherwise, the value of this object shall be
255.255.255.255.
SNMP mangers should note that agent implementation
of previous versions of this MIB report 0.0.0.0 as the
value when the reference parameter is not present,
rather than 255.255.255.255."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.6"
::= { docsQosPktClassEntry 11}
docsQosPktClassSourcePortStart OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the low end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.7"
::= { docsQosPktClassEntry 12 }
docsQosPktClassSourcePortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the high end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
If the referenced parameter is not present
in a classifier, this object reports the value of
65535."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.8"
::= { docsQosPktClassEntry 13 }
docsQosPktClassDestPortStart OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the low end inclusive
range of TCP/UDP destination port numbers to
which a packet is compared.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.9"
::= { docsQosPktClassEntry 14 }
docsQosPktClassDestPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the high end inclusive
range of TCP/UDP destination port numbers to which
a packet is compared.
If the referenced parameter is not present
in a classifier, this object reports the value of
65535."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.10"
::= { docsQosPktClassEntry 15 }
docsQosPktClassDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsQosPktClassDestMacMask equals the value of
docsQosPktClassDestMacAddr.
If the referenced parameter is not present
in a classifier, this object reports the value of
'000000000000'H.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.6.1"
::= { docsQosPktClassEntry 16 }
docsQosPktClassDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsQosPktClassDestMacMask equals the value of
docsQosPktClassDestMacAddr.
If the referenced parameter is not present
in a classifier, this object reports the value of
'000000000000'H.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.6.1"
::= { docsQosPktClassEntry 17 }
docsQosPktClassSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches this entry when its
source MAC address equals the value of
this object.
If the referenced parameter is not present
in a classifier, this object reports the value of
'FFFFFFFFFFFF'H.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.6.2"
::= { docsQosPktClassEntry 18 }
docsQosPktClassEnetProtocolType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethertype(1),
dsap(2),
mac(3),
all(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the format of the layer 3
protocol id in the Ethernet packet. A value of
none(0) means that the rule does not use the
layer 3 protocol type as a matching criteria.
A value of ethertype(1) means that the rule
applies only to frames which contains an
EtherType value. Ethertype values are contained
in packets using the Dec-Intel-Xerox (DIX)
encapsulation or the RFC1042 Sub-Network Access
Protocol (SNAP) encapsulation formats.
A value of dsap(2) means that the rule applies
only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other
than 0xAA (which is reserved for SNAP).
A value of mac(3) means that the rule applies
only to MAC management messages for MAC management
messages.
A value of all(4) means that the rule matches
all Ethernet packets.
If the Ethernet frame contains an 802.1P/Q Tag
header (i.e. EtherType 0x8100), this object
applies to the embedded EtherType field within
the 802.1P/Q header.
If the referenced parameter is not present
in a classifier, this object reports the value of 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.6.3"
::= { docsQosPktClassEntry 19 }
docsQosPktClassEnetProtocol OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If docsQosEthPktClassProtocolType is none(0),
this object is ignored when considering whether
a packet matches the current rule.
If dosQosPktClassEnetProtocolType is ethertype(1),
this object gives the 16-bit value of the
EtherType that the packet must match in order to
match the rule.
If docsQosPktClassEnetProtocolType is dsap(2), the
lower 8 bits of this object's value must match the
DSAP byte of the packet in order to match the
rule.
If docsQosPktClassEnetProtocolType is mac(3), the
lower 8 bits of this object value represent a
lower bound (inclusive) of MAC management message
type codes matched, and the upper 8 bits of this
object value represent the upper bound (inclusive)
of matched MAC message type codes. Certain
message type codes are excluded from matching, as
specified in the reference.
If the Ethernet frame contains an 802.1P/Q Tag header
(i.e. EtherType 0x8100), this object applies to the
embedded EtherType field within the 802.1P/Q header.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.6.3"
::= { docsQosPktClassEntry 20 }
docsQosPktClassUserPriApplies OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosPktClassEntry 21 }
docsQosPktClassUserPriLow OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Q tag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3 bit Priority field and
a 12 bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsQosPktClassPriLow and docsQosPktClassPriHigh in
order to match this rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.7.1"
::= { docsQosPktClassEntry 22 }
docsQosPktClassUserPriHigh OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3 bit Priority field and
a 12 bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsQosPktClassPriLow and
docsQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.7.1"
::= { docsQosPktClassEntry 23 }
docsQosPktClassVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.7.2"
::= { docsQosPktClassEntry 24 }
docsQosPktClassState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether or not the classifier
is enabled to classify packets to a Service Flow.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as active(1).
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.3.6"
::= { docsQosPktClassEntry 25 }
docsQosPktClassPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of packets that have
been classified using this entry."
::= { docsQosPktClassEntry 26 }
docsQosPktClassBitMap OBJECT-TYPE
SYNTAX BITS { -- Reference SP-RFIv1.1-I07-010829
rulePriority(0), -- Appendix C.2.1.3.4
activationState(1), -- Appendix C.2.1.3.6
ipTos(2), -- Appendix C.2.1.5.1
ipProtocol(3), -- Appendix C.2.1.5.2
ipSourceAddr(4), -- Appendix C.2.1.5.3
ipSourceMask(5), -- Appendix C.2.1.5.4
ipDestAddr(6), -- Appendix C.2.1.5.5
ipDestMask(7), -- Appendix C.2.1.5.6
sourcePortStart(8), -- Appendix C.2.1.5.7
sourcePortEnd(9), -- Appendix C.2.1.5.8
destPortStart(10), -- Appendix C.2.1.5.9
destPortEnd(11), -- Appendix C.2.1.5.10
destMac(12), -- Appendix C.2.1.6.1
sourceMac(13), -- Appendix C.2.1.6.2
ethertype(14), -- Appendix C.2.1.6.3
userPri(15), -- Appendix C.2.1.7.1
vlanId(16) -- Appendix C.2.1.7.2
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which parameter encodings were
actually present in the DOCSIS packet classifier
encoding signaled in the DOCSIS message that
created or modified the classifier. Note that
Dynamic Service Change messages have replace
semantics, so that all non-default parameters must
be present whether the classifier is being created
or changed.
A bit of of this object is set to 1 if the parameter
indicated by the comment was present in the classifier
encoding, and 0 otherwise.
Note that BITS are encoded most significant bit
first, so that if e.g. bits 6 and 7 are set, this object
is encoded as the octet string '030000'H.
"
::= { docsQosPktClassEntry 27 }
docsQosPktClassInetSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the internet address for
docsQosPktClassInetSourceAddr. This type must be
the same as the docsQosPktClassInetSourceMaskType.
If the referenced parameter is not present
in a classifier, this object reports the value of
ipv4(1)."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.3"
::= { docsQosPktClassEntry 28 }
docsQosPktClassInetSourceAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the value of the IP
Source Address required for packets to match
this rule. An IP packet matches the rule when
the packet ip source address bitwise ANDed
with the docsQosPktClassInetSourceMask value
equals the docsQosPktClassInetSourceAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
'00000000'H."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.3"
::= { docsQosPktClassEntry 29 }
docsQosPktClassInetSourceMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the internet address for
docsQosPktClassInetSourceMask. This type must be
the same as the docsQosPktClassInetSourceAddrType.
If the referenced parameter is not present
in a classifier, this object reports the value of
ipv4(1)."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.4"
::= { docsQosPktClassEntry 30 }
docsQosPktClassInetSourceMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies which bits of a packet's
IP Source Address that are compared to match
this rule.
An IP packet matches the rule when the packet
source address bitwise ANDed with the
docsQosPktClassInetSourceMask value equals the
docsQosIpPktClassInetSourceAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
'FFFFFFFF'H."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.4"
::= { docsQosPktClassEntry 31 }
docsQosPktClassInetDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the internet address for
docsQosPktClassInetDestAddr. This type must be
the same as the docsQosPktClassInetDestMaskType.
If the referenced parameter is not present
in a classifier, this object reports the value of
ipv4(1)."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.5"
::= { docsQosPktClassEntry 32 }
docsQosPktClassInetDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the value of the IP
Destination Address required for packets to match
this rule. An IP packet matches the rule when
the packet ip destination address
bitwise ANDed with the
docsQosPktClassInetDestMask value
equals the docsQosPktClassInetDestAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
'00000000'H."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.5"
::= { docsQosPktClassEntry 33 }
docsQosPktClassInetDestMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the internet address for
docsQosPktClassInetDestMask. This type must be
the same as the docsQosPktClassInetDestAddrType.
If the referenced parameter is not present
in a classifier, this object reports the value of
ipv4(1)."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.6"
::= { docsQosPktClassEntry 34 }
docsQosPktClassInetDestMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies which bits of a packet's
IP Destination Address that are compared to
match this rule.
An IP packet matches the rule when the packet
destination address bitwise ANDed with the
docsQosPktClassInetDestMask value equals the
docsQosIpPktClassInetDestAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
'FFFFFFFF'H."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.5.6"
::= { docsQosPktClassEntry 35 }
--
-- QOS Parameter Set Table
--
docsQosParamSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
"
::= { docsQosMIBObjects 2 }
-- docsQosParamSetEntry { docsQosParamSetTable 1 } was
-- removed in an initial and unimplemented version of this mib.
docsQosParamSetEntry OBJECT-TYPE
SYNTAX DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique set of QOS parameters."
INDEX {
ifIndex, docsQosServiceFlowId, docsQosParamSetType
}
::= { docsQosParamSetTable 1 }
DocsQosParamSetEntry ::= SEQUENCE {
docsQosParamSetServiceClassName DisplayString,
docsQosParamSetPriority Integer32,
docsQosParamSetMaxTrafficRate BitRate,
docsQosParamSetMaxTrafficBurst Unsigned32,
docsQosParamSetMinReservedRate BitRate,
docsQosParamSetMinReservedPkt Integer32,
docsQosParamSetActiveTimeout Integer32,
docsQosParamSetAdmittedTimeout Integer32,
docsQosParamSetMaxConcatBurst Integer32,
docsQosParamSetSchedulingType SchedulingType,
docsQosParamSetNomPollInterval Unsigned32,
docsQosParamSetTolPollJitter Unsigned32,
docsQosParamSetUnsolicitGrantSize Integer32,
docsQosParamSetNomGrantInterval Unsigned32,
docsQosParamSetTolGrantJitter Unsigned32,
docsQosParamSetGrantsPerInterval Integer32,
docsQosParamSetTosAndMask OCTET STRING,
docsQosParamSetTosOrMask OCTET STRING,
docsQosParamSetMaxLatency Unsigned32,
docsQosParamSetType INTEGER,
docsQosParamSetRequestPolicyOct OCTET STRING,
docsQosParamSetBitMap BITS
}
docsQosParamSetServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Refers to the Service Class Name that the
parameter set values were derived.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is a zero length string.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.3.4"
::= { docsQosParamSetEntry 4 }
docsQosParamSetPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The relative priority of a service flow.
Higher numbers indicate higher priority.
This priority should only be used to differentiate
service flow with identical parameter sets.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, the reported value is 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.1"
::= { docsQosParamSetEntry 5 }
docsQosParamSetMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum sustained traffic rate allowed for this
service flow in bits/sec. Must count all MAC frame
data PDU from the bytes following the MAC header HCS to
the end of the CRC. The number of bytes
forwarded is limited during any time interval.
The value 0 means no maximum traffic rate is
enforced. This object applies to both upstream and
downstream service flows.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, it is reported as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.2"
::= { docsQosParamSetEntry 6 }
docsQosParamSetMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the token bucket size in bytes
for this parameter set. The value is calculated
from the byte following the MAC header HCS to
the end of the CRC. This object is applied in
conjunction with docsQosParamSetMaxTrafficRate to
calculate maximum sustained traffic rate.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object for scheduling types
bestEffort (2), nonRealTimePollingService(3),
and realTimePollingService(4) is 1522.
If this parameter is not applicable, it is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.3"
::= { docsQosParamSetEntry 7 }
docsQosParamSetMinReservedRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the guaranteed minimum rate in
bits/sec for this parameter set. The value is
calculated from the byte following the MAC
header HCS to the end of the CRC. The default
value of 0 has the meaning that no bandwidth
is reserved.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter
is not applicable, it is reported as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.4"
::= { docsQosParamSetEntry 8 }
docsQosParamSetMinReservedPkt OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies an assumed minimum packet size in
bytes for which the docsQosParamSetMinReservedRate
will be provided. The value is calculated from
the byte following the MAC header HCS to the
end of the CRC.
If the referenced parameter is omitted from a
DOCSIS QOS parameter set, the default value is
CMTS implementation dependent. In this case, the
CMTS reports the default value it is using and the
CM reports a value of 0. If the referenced
parameter is not applicable to the direction or
scheduling type of the service flow, both CMTS and
CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.5"
::= { docsQosParamSetEntry 9 }
docsQosParamSetActiveTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum duration in seconds that
resources remain unused on an active service
flow before CMTS signals that both active and
admitted parameters set are null.
The default value of 0 signifies an
infinite amount of time.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.6"
::= { docsQosParamSetEntry 10 }
docsQosParamSetAdmittedTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum duration in seconds that
resources remain in admitted state before
resources must be released.
The value of 0 signifies an infinite amount
of time.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the
default value of this object is 200.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.5.7"
DEFVAL { 200 }
::= { docsQosParamSetEntry 11 }
docsQosParamSetMaxConcatBurst OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum concatenated burst in
bytes which an upstream service flow is allowed.
The value is calculated from the FC byte of the
Concatenation MAC Header to the last CRC byte in
of the last concatenated MAC frame, inclusive.
The value of 0 specifies no maximum burst.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, this object's value is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.1"
::= { docsQosParamSetEntry 12 }
docsQosParamSetSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the upstream scheduling service used for
upstream service flow.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set of an
upstream service flow, the default value of this
object is bestEffort(2). For QOS parameter sets of
downstream service flows, this object's value is
reported as undefined(1).
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.2"
::= { docsQosParamSetEntry 13 }
docsQosParamSetNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the nominal interval in microseconds
between successive unicast request
opportunities on an upstream service flow.
This object applies only to upstream service flows
with schedulingType of value
nonRealTimePollingService(3),
realTimePollingService(4), and
unsolictedGrantServiceWithAD(5). The parameter is
mandatory for realTimePollingService(4). If the
parameter is omitted with
nonRealTimePollingService(3), the CMTS uses an
implementation dependent value. If the parameter
is omitted with unsolictedGrantServiceWithAD(5),
the CMTS uses as a default value the value of the
Nominal Grant Interval parameter. In all cases,
the CMTS reports the value it is using when the
parameter is applicable. The CM reports the
signaled parameter value if it was signaled,
and 0 otherwise.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.4"
::= { docsQosParamSetEntry 15 }
docsQosParamSetTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum amount of time in
microseconds that the unicast request interval
may be delayed from the nominal periodic
schedule on an upstream service flow.
This parameter is applicable only to upstream
service flows with a Schedulingtype of
realTimePollingService(4) or
unsolictedGrantServiceWithAD(5).
If the referenced parameter is applicable but not
present in the corresponding DOCSIS QOS Parameter
Set, the CMTS uses an implementation dependent
value and reports the value it is using.
The CM reports a value of 0 in this case.
If the parameter is not applicable to the
direction or upstream scheduling type of the
service flow, both CMTS and CM report this
object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.5"
::= { docsQosParamSetEntry 16 }
docsQosParamSetUnsolicitGrantSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the unsolicited grant size in bytes.
The grant size includes the entire MAC frame
data PDU from the Frame Control byte to end of
the MAC frame.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report
the signaled value of the parameter in this
case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.6"
::= { docsQosParamSetEntry 17 }
docsQosParamSetNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the nominal interval in microseconds
between successive data grant opportunities
on an upstream service flow.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.7"
::= { docsQosParamSetEntry 18 }
docsQosParamSetTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum amount of time in
microseconds that the transmission opportunities
may be delayed from the nominal periodic schedule.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.8"
::= { docsQosParamSetEntry 19 }
docsQosParamSetGrantsPerInterval OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the number of data grants per Nominal
Grant Interval
(docsQosParamSetNomGrantInterval).
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.9"
::= { docsQosParamSetEntry 20 }
docsQosParamSetTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the AND mask for IP TOS byte for overwriting
IP packets TOS value. The IP packets TOS byte is
bitwise ANDed with docsQosParamSetTosAndMask and
result is bitwise ORed with docsQosParamSetTosORMask
and result is written to IP packet TOS byte.
A value of 'FF'H for docsQosParamSetTosAndMask and
a value of '00'H for docsQosParamSetTosOrMask means
that IP Packet TOS byte is not overwritten.
Even though the this object is only enforced by the
Cable Modem Termination System (CMTS),
Cable Modems must report the value as signaled in
the referenced parameter.
This combination is reported if the referenced
parameter is not present in a QOS Parameter Set."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.10"
::= { docsQosParamSetEntry 21 }
docsQosParamSetTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the OR mask for IP TOS byte.
See the description of docsQosParamSetTosAndMask
for further details."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.10"
::= { docsQosParamSetEntry 22 }
docsQosParamSetMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum latency between the
reception of a packet by the CMTS on its NSI
and the forwarding of the packet to the RF
interface. A value of 0 signifies no maximum
latency enforced. This object only applies to
downstream service flows.
If the referenced parameter is not present in the
corresponding downstream DOCSIS QOS Parameter Set,
the default value is 0. This parameter is
not applicable to upstream DOCSIS QOS Parameter Sets,
and its value is reported as 0 in this case.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.7.1"
::= { docsQosParamSetEntry 23 }
docsQosParamSetType OBJECT-TYPE
SYNTAX INTEGER {
active (1),
admitted (2),
provisioned (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the Docsis MAC domain to the
service flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
by the Docsis MAC domain for use by the service flow.
provisioned (3) describes the QOS Parameter Set
defined in the DOCSIS CM Configuration file for
the service flow."
REFERENCE "SP-RFIv1.1-I07-010829, 8.1.5"
::= { docsQosParamSetEntry 24 }
docsQosParamSetRequestPolicyOct OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
-- A 32-bit mask represented most significant byte
-- first. The 32 bit integer represented in this manner
-- equals the binary value of the referenced integer
-- parameter of the DOCSIS RFI specification.
-- The BITS syntax is not used in order to avoid
-- the confusion caused by different bit numbering
-- conventions.
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies which transmit interval opportunities
the CM omits for upstream transmission requests and
packet transmissions. This object takes its
default value for downstream service flows.
Unless otherwise indicated, a bit value of 1 means
that a CM must *not* use that opportunity for
upstream transmission.
Calling bit 0 the least significant bit of the
least significant (4th) octet, and increasing
bit number with significance, the bit definitions
are as defined below:
broadcastReqOpp(0):
all CMs broadcast request opportunities
priorityReqMulticastReq(1):
priority request multicast request opportunities
reqDataForReq(2):
request/data opportunities for requests
reqDataForData(3):
request/data opportunities for data
piggybackReqWithData(4):
piggyback requests with data
concatenateData(5):
concatenate data
fragmentData(6):
fragment data
suppresspayloadheaders(7):
suppress payload headers
dropPktsExceedUGSize(8):
A value of 1 mean that service flow must drop
packet that do not fit in the Unsolicited
Grant size
If the referenced parameter is not present in
a QOS Parameter Set, the value of this object is
reported as '00000000'H.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.6.3"
::= { docsQosParamSetEntry 25 }
docsQosParamSetBitMap OBJECT-TYPE
-- Each bit corresponds to a parameter
-- from SP-RFI-v1.1-I07-010829, Appendix C
SYNTAX BITS { -- in the indicated section number.
trafficPriority(0), -- C.2.2.5.1
maxTrafficRate(1), -- C.2.2.5.2
maxTrafficBurst(2), -- C.2.2.5.3
minReservedRate(3), -- C.2.2.5.4
minReservedPkt(4), -- C.2.2.5.5
activeTimeout(5), -- C.2.2.5.6
admittedTimeout(6), -- C.2.2.5.7
maxConcatBurst(7), -- C.2.2.6.1
schedulingType(8), -- C.2.2.6.2
requestPolicy(9), -- C.2.2.6.3
nomPollInterval(10), -- C.2.2.6.4
tolPollJitter(11), -- C.2.2.6.5
unsolicitGrantSize(12), -- C.2.2.6.6
nomGrantInterval(13), -- C.2.2.6.7
tolGrantJitter(14), -- C.2.2.6.8
grantsPerInterval(15), -- C.2.2.6.9
tosOverwrite(16), -- C.2.2.6.10
maxLatency(17) -- C.2.2.7.1
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the set of QOS Parameter
Set parameters actually signaled in the
DOCSIS registration or dynamic service request
message that created or modified the QOS Parameter Set.
A bit is set to 1 when the parameter described
by the indicated reference section is present
in the original request.
Note that when Service Class names are expanded,
the registration or dynamic response message may
contain parameters as expanded by the CMTS based
on a stored service class. These expanded
parameters are *not* indicated by a 1 bit in this
object.
Note that even though some QOS Parameter Set
parameters may not be signalled in a message
(so that the paramater's bit in this object is 0)
the DOCSIS specification calls for default
values to be used. These default values are
reported as the corresponding object's value in
the row.
Note that BITS objects are encoded most
significant bit first. For example, if bits
1 and 16 are set, the value of this object
is the octet string '400080'H.
"
::= { docsQosParamSetEntry 26 }
--
-- Service Flow Table
--
docsQosServiceFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Flows in a managed device. "
::= { docsQosMIBObjects 3 }
docsQosServiceFlowEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a service flow.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId
}
::= { docsQosServiceFlowTable 1 }
DocsQosServiceFlowEntry ::= SEQUENCE {
docsQosServiceFlowId Unsigned32,
docsQosServiceFlowProvisionedParamSetIndex Unsigned32,
docsQosServiceFlowAdmittedParamSetIndex Unsigned32,
docsQosServiceFlowActiveParamSetIndex Unsigned32,
docsQosServiceFlowSID Unsigned32,
docsQosServiceFlowDirection IfDirection,
docsQosServiceFlowPrimary TruthValue,
docsQosServiceFlowActiveTimeout Integer32,
docsQosServiceFlowAdmittedTimeout Integer32,
docsQosServiceFlowSchedulingType SchedulingType,
docsQosServiceFlowRequestPolicy OCTET STRING (SIZE(4)),
docsQosServiceFlowTosAndMask OCTET STRING (SIZE(1)),
docsQosServiceFlowTosOrMask OCTET STRING (SIZE(1))
}
docsQosServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index assigned to a service flow by CMTS."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.3.2"
::= { docsQosServiceFlowEntry 1 }
docsQosServiceFlowProvisionedParamSetIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 3 }
docsQosServiceFlowAdmittedParamSetIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 4 }
docsQosServiceFlowActiveParamSetIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 5 }
docsQosServiceFlowSID OBJECT-TYPE
SYNTAX Unsigned32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service Identifier (SID) assigned to an
admitted or active service flow. This object
reports a value of 0 if a Service Id is not
associated with the service flow. Only active
or admitted upstream service flows will have a
Service Id (SID)."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.3.3"
::= { docsQosServiceFlowEntry 6 }
docsQosServiceFlowDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The direction of the service flow."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.1/2"
::= { docsQosServiceFlowEntry 7 }
docsQosServiceFlowPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Object reflects whether service flow is the primary
or a secondary service flow.
A primary service flow is the default service flow
for otherwise unclassified traffic and all MAC
messages."
REFERENCE "SP-RFIv1.1-I07-010829, Section 8.1 "
::= { docsQosServiceFlowEntry 8 }
docsQosServiceFlowActiveTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 9 }
docsQosServiceFlowAdmittedTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 10 }
docsQosServiceFlowSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 11 }
docsQosServiceFlowRequestPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 12 }
docsQosServiceFlowTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 13 }
docsQosServiceFlowTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceFlowEntry 14 }
--
-- Service Flow Stats Table
--
docsQosServiceFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with the
Service Flows in a managed device. "
::= { docsQosMIBObjects 4 }
docsQosServiceFlowStatsEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of service flow statistics.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId
}
::= { docsQosServiceFlowStatsTable 1 }
DocsQosServiceFlowStatsEntry ::= SEQUENCE {
docsQosServiceFlowPkts Counter32,
docsQosServiceFlowOctets Counter32,
docsQosServiceFlowTimeCreated TimeStamp,
docsQosServiceFlowTimeActive Counter32,
docsQosServiceFlowPHSUnknowns Counter32,
docsQosServiceFlowPolicedDropPkts Counter32,
docsQosServiceFlowPolicedDelayPkts Counter32
}
docsQosServiceFlowPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Packet Data PDUs classified to this
service flow. This object does not count MAC-specific
management messages.
CMs not classifying downstream packets may report
this object's value as 0. "
::= { docsQosServiceFlowStatsEntry 1 }
docsQosServiceFlowOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets transmitted on the Docsis RF network
from the byte after the MAC header HCS to the end
of the CRC for all packets counted in the
docsQosServiceFlowPkts object for this row. Note that
this counts the octets after payload header suppression
has been applied. CMs not classifying to a downstream
service flow may report this object's value as 0 for that
flow. "
::= { docsQosServiceFlowStatsEntry 2 }
docsQosServiceFlowTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was created."
::= { docsQosServiceFlowStatsEntry 3 }
docsQosServiceFlowTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total time that service flow has been active."
::= { docsQosServiceFlowStatsEntry 4 }
docsQosServiceFlowPHSUnknowns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets received on the service flow
with an unknown payload header suppression index."
::= { docsQosServiceFlowStatsEntry 5 }
docsQosServiceFlowPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets dropped due to policing of
the service flow, especially to limit the maximum
rate of the flow."
::= { docsQosServiceFlowStatsEntry 6 }
docsQosServiceFlowPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packet delayed due to policing of
the service flow, especially to limit the maximum
rate of the flow."
::= { docsQosServiceFlowStatsEntry 7 }
--
-- Upstream Service Flow Stats Table (CMTS ONLY)
--
docsQosUpstreamStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with
upstream service flows. All counted frames must
be received without an FCS error."
::= { docsQosMIBObjects 5 }
docsQosUpstreamStatsEntry OBJECT-TYPE
SYNTAX DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of upstream service flow statistics.
An entry in the table exists for each
upstream Service Flow in a managed device.
The ifIndex is an ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosSID
}
::= { docsQosUpstreamStatsTable 1 }
DocsQosUpstreamStatsEntry ::= SEQUENCE {
docsQosSID Integer32,
docsQosUpstreamFragments Counter32,
docsQosUpstreamFragDiscards Counter32,
docsQosUpstreamConcatBursts Counter32
}
docsQosSID OBJECT-TYPE
SYNTAX Integer32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies a service id for an admitted or active
upstream service flow."
::= { docsQosUpstreamStatsEntry 1 }
docsQosUpstreamFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of fragmentation headers received on an
upstream service flow, regardless of whether
the fragment was correctly reassembled into a
valid packet. "
::= { docsQosUpstreamStatsEntry 2 }
docsQosUpstreamFragDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of upstream fragments discarded and not
assembled into a valid upstream packet."
::= { docsQosUpstreamStatsEntry 3 }
docsQosUpstreamConcatBursts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of concatenation headers received on an
upstream service flow."
::= { docsQosUpstreamStatsEntry 4 }
--
-- Dynamic Service Stats Table
--
docsQosDynamicServiceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with the
Dynamic Service Flows in a managed device. "
::= { docsQosMIBObjects 6 }
docsQosDynamicServiceStatsEntry OBJECT-TYPE
SYNTAX DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of dynamic service flow statistics.
Two entries exist for each Docsis mac layer
interface for the upstream and downstream direction.
On the CMTS, the downstream direction row indicates
messages transmitted or transactions originated
by the CMTS. The upstream direction row indicates
messages received or transaction originated by the
CM. On the CM, the downstream direction row
indicates messages received or transactions
originated by the CMTS. The upstream direction
row indicates messages transmitted by the CM or
transactions originated by the CM.
The ifIndex is an ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosIfDirection
}
::= { docsQosDynamicServiceStatsTable 1 }
DocsQosDynamicServiceStatsEntry ::= SEQUENCE {
docsQosIfDirection IfDirection,
docsQosDSAReqs Counter32,
docsQosDSARsps Counter32,
docsQosDSAAcks Counter32,
docsQosDSCReqs Counter32,
docsQosDSCRsps Counter32,
docsQosDSCAcks Counter32,
docsQosDSDReqs Counter32,
docsQosDSDRsps Counter32,
docsQosDynamicAdds Counter32,
docsQosDynamicAddFails Counter32,
docsQosDynamicChanges Counter32,
docsQosDynamicChangeFails Counter32,
docsQosDynamicDeletes Counter32,
docsQosDynamicDeleteFails Counter32,
docsQosDCCReqs Counter32,
docsQosDCCRsps Counter32,
docsQosDCCAcks Counter32,
docsQosDCCs Counter32,
docsQosDCCFails Counter32,
docsQosDCCRspDeparts Counter32,
docsQosDCCRspArrives Counter32
}
docsQosIfDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The direction of interface."
::= { docsQosDynamicServiceStatsEntry 1 }
docsQosDSAReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Requests,
including retries."
::= { docsQosDynamicServiceStatsEntry 2 }
docsQosDSARsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Responses,
including retries."
::= { docsQosDynamicServiceStatsEntry 3 }
docsQosDSAAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Acknowledgements,
including retries."
::= { docsQosDynamicServiceStatsEntry 4 }
docsQosDSCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Requests,
including retries."
::= { docsQosDynamicServiceStatsEntry 5 }
docsQosDSCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Responses,
including retries."
::= { docsQosDynamicServiceStatsEntry 6 }
docsQosDSCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Acknowledgements,
including retries."
::= { docsQosDynamicServiceStatsEntry 7 }
docsQosDSDReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Delete Requests,
including retries."
::= { docsQosDynamicServiceStatsEntry 8 }
docsQosDSDRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Delete Responses,
including retries."
::= { docsQosDynamicServiceStatsEntry 9 }
docsQosDynamicAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Addition
transactions."
::= { docsQosDynamicServiceStatsEntry 10 }
docsQosDynamicAddFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Addition
transactions."
::= { docsQosDynamicServiceStatsEntry 11 }
docsQosDynamicChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Change
transactions."
::= { docsQosDynamicServiceStatsEntry 12 }
docsQosDynamicChangeFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Change
transactions."
::= { docsQosDynamicServiceStatsEntry 13 }
docsQosDynamicDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Delete
transactions."
::= { docsQosDynamicServiceStatsEntry 14 }
docsQosDynamicDeleteFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Delete
transactions."
::= { docsQosDynamicServiceStatsEntry 15 }
docsQosDCCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Request messages
traversing an interface. This count is nonzero only on
downstream direction rows. This count should
include number of retries."
::= { docsQosDynamicServiceStatsEntry 16 }
docsQosDCCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Response messages
traversing an interface. This count is nonzero
only on upstream direction rows. This count should
include number of retries."
::= { docsQosDynamicServiceStatsEntry 17 }
docsQosDCCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Acknowledgement
messages traversing an interface. This count
is nonzero only on downstream direction rows.
This count should include number of retries."
::= { docsQosDynamicServiceStatsEntry 18 }
docsQosDCCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Channel Change
transactions. This count is nonzero only on downstream
direction rows."
::= { docsQosDynamicServiceStatsEntry 19 }
docsQosDCCFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Channel Change
transactions. This count is nonzero only on
downstream direction rows."
::= { docsQosDynamicServiceStatsEntry 20 }
docsQosDCCRspDeparts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Response (depart)
messages traversing an interface. This count is only counted
on upstream direction rows."
REFERENCE "SP-RFIv2.0-I04-037030, Figures 11-59, 11-60, 11-61, 11-62"
::= { docsQosDynamicServiceStatsEntry 21 }
docsQosDCCRspArrives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Response (arrive)
messages traversing an interface. This count is only counted on
upstream direction rows. This count should include number of retries."
REFERENCE "SP-RFIv2.0-I04-037030, Figures 11-59, 11-60, 11-61, 11-62"
::= { docsQosDynamicServiceStatsEntry 22 }
--
-- Service Flow Log Table (CMTS ONLY)
--
docsQosServiceFlowLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains a log of the disconnected
Service Flows in a managed device."
::= { docsQosMIBObjects 7 }
docsQosServiceFlowLogEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information regarding a single disconnected
service flow."
INDEX {
docsQosServiceFlowLogIndex
}
::= { docsQosServiceFlowLogTable 1 }
DocsQosServiceFlowLogEntry ::= SEQUENCE {
docsQosServiceFlowLogIndex Unsigned32,
docsQosServiceFlowLogIfIndex InterfaceIndex,
docsQosServiceFlowLogSFID Unsigned32,
docsQosServiceFlowLogCmMac MacAddress,
docsQosServiceFlowLogPkts Counter32,
docsQosServiceFlowLogOctets Counter32,
docsQosServiceFlowLogTimeDeleted TimeStamp,
docsQosServiceFlowLogTimeCreated TimeStamp,
docsQosServiceFlowLogTimeActive Counter32,
docsQosServiceFlowLogDirection IfDirection,
docsQosServiceFlowLogPrimary TruthValue,
docsQosServiceFlowLogServiceClassName DisplayString,
docsQosServiceFlowLogPolicedDropPkts Counter32,
docsQosServiceFlowLogPolicedDelayPkts Counter32,
docsQosServiceFlowLogControl INTEGER
}
docsQosServiceFlowLogIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique index for a logged service flow."
::= { docsQosServiceFlowLogEntry 1 }
docsQosServiceFlowLogIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of ifType docsCableMaclayer(127)
on the CMTS where the service flow was present."
::= { docsQosServiceFlowLogEntry 2 }
docsQosServiceFlowLogSFID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index assigned to the service flow by the CMTS."
::= { docsQosServiceFlowLogEntry 3 }
docsQosServiceFlowLogCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address for the cable modem associated with
the service flow."
::= { docsQosServiceFlowLogEntry 4 }
docsQosServiceFlowLogPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets counted on this service flow
after payload header suppression."
::= { docsQosServiceFlowLogEntry 5 }
docsQosServiceFlowLogOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets counted on this service flow
after payload header suppression."
::= { docsQosServiceFlowLogEntry 6 }
docsQosServiceFlowLogTimeDeleted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was deleted."
::= { docsQosServiceFlowLogEntry 7 }
docsQosServiceFlowLogTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was created."
::= { docsQosServiceFlowLogEntry 8 }
docsQosServiceFlowLogTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total time that service flow was active."
::= { docsQosServiceFlowLogEntry 9 }
-- docsQosServiceFlowLogControl was formerly { docsQosServiceFlowLogEntry 10}
-- and was renumbered in an earlier revision of this mib.
docsQosServiceFlowLogDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosServiceFlowDirection
for the service flow."
::= { docsQosServiceFlowLogEntry 11}
docsQosServiceFlowLogPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosServiceFlowPrimary for the
service flow."
::= { docsQosServiceFlowLogEntry 12}
docsQosServiceFlowLogServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosParamSetServiceClassName for
the provisioned QOS Parameter Set of the
service flow."
::= { docsQosServiceFlowLogEntry 13}
docsQosServiceFlowLogPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The final value of docsQosServiceFlowPolicedDropPkts
for the service flow."
::= { docsQosServiceFlowLogEntry 14}
docsQosServiceFlowLogPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The final value of docsQosServiceFlowPolicedDelayPkts
for the service flow."
::= { docsQosServiceFlowLogEntry 15}
docsQosServiceFlowLogControl OBJECT-TYPE
SYNTAX INTEGER {
active(1),
destroy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to the value destroy(6) removes
this entry from the table.
Reading this object return the value active(1)."
::= { docsQosServiceFlowLogEntry 16}
--
-- Service Class Table (CMTS ONLY)
--
docsQosServiceClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Classes in a CMTS. "
::= { docsQosMIBObjects 8 }
docsQosServiceClassEntry OBJECT-TYPE
SYNTAX DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A provisioned service class on a CMTS.
Each entry defines a template for certain
DOCSIS QOS Parameter Set values. When a CM
creates or modifies an Admitted QOS Parameter Set for a
Service Flow, it may reference a Service Class
Name instead of providing explicit QOS Parameter
Set values. In this case, the CMTS populates
the QOS Parameter Set with the applicable
corresponding values from the named Service Class.
Subsequent changes to a Service Class row do *not*
affect the QOS Parameter Set values of any service flows
already admitted.
A service class template applies to only
a single direction, as indicated in the
docsQosServiceClassDirection object.
"
INDEX {
docsQosServiceClassName
}
::= { docsQosServiceClassTable 1 }
DocsQosServiceClassEntry ::= SEQUENCE {
docsQosServiceClassName DisplayString (SIZE(1..15)),
docsQosServiceClassParamSetIndex Unsigned32,
docsQosServiceClassStatus RowStatus,
docsQosServiceClassPriority Integer32,
docsQosServiceClassMaxTrafficRate BitRate,
docsQosServiceClassMaxTrafficBurst Unsigned32,
docsQosServiceClassMinReservedRate BitRate,
docsQosServiceClassMinReservedPkt Integer32,
docsQosServiceClassMaxConcatBurst Integer32,
docsQosServiceClassNomPollInterval Unsigned32,
docsQosServiceClassTolPollJitter Unsigned32,
docsQosServiceClassUnsolicitGrantSize Integer32,
docsQosServiceClassNomGrantInterval Unsigned32,
docsQosServiceClassTolGrantJitter Unsigned32,
docsQosServiceClassGrantsPerInterval Integer32,
docsQosServiceClassMaxLatency Unsigned32,
docsQosServiceClassActiveTimeout Integer32,
docsQosServiceClassAdmittedTimeout Integer32,
docsQosServiceClassSchedulingType SchedulingType,
docsQosServiceClassRequestPolicy OCTET STRING (SIZE(4)),
docsQosServiceClassTosAndMask OCTET STRING (SIZE(1)),
docsQosServiceClassTosOrMask OCTET STRING (SIZE(1)),
docsQosServiceClassDirection IfDirection
}
docsQosServiceClassName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Service Class Name. DOCSIS specifies that the
maximum size is 15 printable ASCII characters with
a terminating zero. The terminating zero is not
represented in this DisplayString syntax object.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.3.4"
::= { docsQosServiceClassEntry 1 }
docsQosServiceClassParamSetIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosServiceClassEntry 2 }
docsQosServiceClassStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create or delete rows in this table."
::= { docsQosServiceClassEntry 3 }
docsQosServiceClassPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetPriority."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 4 }
docsQosServiceClassMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxTrafficRate."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 5 }
docsQosServiceClassMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxTrafficBurst."
DEFVAL { 1522 }
::= { docsQosServiceClassEntry 6 }
docsQosServiceClassMinReservedRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSEtMinReservedRate."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 7 }
docsQosServiceClassMinReservedPkt OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMinReservedPkt."
::= { docsQosServiceClassEntry 8 }
docsQosServiceClassMaxConcatBurst OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxConcatBurst."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 9 }
docsQosServiceClassNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetNomPollInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 10 }
docsQosServiceClassTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTolPollJitter."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 11 }
docsQosServiceClassUnsolicitGrantSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetUnsolicitGrantSize."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 12 }
docsQosServiceClassNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetNomGrantInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 13 }
docsQosServiceClassTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTolGrantJitter."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 14 }
docsQosServiceClassGrantsPerInterval OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetGrantsPerInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 15 }
docsQosServiceClassMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetClassMaxLatency."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.7.1"
DEFVAL { 0 }
::= { docsQosServiceClassEntry 16 }
docsQosServiceClassActiveTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetActiveTimeout."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 17 }
docsQosServiceClassAdmittedTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetAdmittedTimeout."
DEFVAL { 200 }
::= { docsQosServiceClassEntry 18 }
docsQosServiceClassSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetSchedulingType."
DEFVAL { bestEffort }
::= { docsQosServiceClassEntry 19 }
docsQosServiceClassRequestPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetRequestPolicyOct."
DEFVAL { '00000000'H } -- no bits are set
::= { docsQosServiceClassEntry 20 }
docsQosServiceClassTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTosAndMask."
DEFVAL { 'FF'H }
::= { docsQosServiceClassEntry 21 }
docsQosServiceClassTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTosOrMask."
DEFVAL { '00'H }
::= { docsQosServiceClassEntry 22 }
docsQosServiceClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies whether the service class template
applies to upstream or downstream service flows."
DEFVAL { upstream }
::= { docsQosServiceClassEntry 23 }
--
-- Service Class PolicyTable
--
docsQosServiceClassPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceClassPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Class Policies.
This table is an adjunct to the
docsDevFilterPolicy table. Entries in
docsDevFilterPolicy table can point to
specific rows in this table.
This table permits mapping a packet to a service
class name of an active service flow so long as
a classifier does not exist at a higher
priority.
"
REFERENCE "SP-RFIv1.1-I07-010829, Appendix E.2.1"
::= { docsQosMIBObjects 9 }
docsQosServiceClassPolicyEntry OBJECT-TYPE
SYNTAX DocsQosServiceClassPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A service class name policy entry."
INDEX {
docsQosServiceClassPolicyIndex
}
::= { docsQosServiceClassPolicyTable 1 }
DocsQosServiceClassPolicyEntry ::= SEQUENCE {
docsQosServiceClassPolicyIndex Integer32,
docsQosServiceClassPolicyName DisplayString,
docsQosServiceClassPolicyRulePriority Integer32,
docsQosServiceClassPolicyStatus RowStatus
}
docsQosServiceClassPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index value to uniquely identify an entry in
this table."
::= { docsQosServiceClassPolicyEntry 1 }
docsQosServiceClassPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Service Class Name to identify the name of the
service class flow to which the packet should be
directed."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix E.2.1"
::= { docsQosServiceClassPolicyEntry 2 }
docsQosServiceClassPolicyRulePriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Service Class Policy rule priority for the
entry."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.3.5"
::= { docsQosServiceClassPolicyEntry 3 }
docsQosServiceClassPolicyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create or delete rows in this table.
This object should not be deleted if it is
reference by an entry in docsDevFilterPolicy.
The reference should be deleted first."
::= { docsQosServiceClassPolicyEntry 4 }
--
-- Payload Header Suppression(PHS) Table
--
docsQosPHSTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes set of payload header
suppression entries."
::= { docsQosMIBObjects 10 }
docsQosPHSEntry OBJECT-TYPE
SYNTAX DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A payload header suppression entry.
The ifIndex is an ifType of docsCableMaclayer(127).
The index docsQosServiceFlowId selects one
service flow from the cable MAC layer interface.
The docsQosPktClassId index matches an
index of the docsQosPktClassTable.
"
INDEX {
ifIndex,
docsQosServiceFlowId,
docsQosPktClassId
}
::= { docsQosPHSTable 1 }
DocsQosPHSEntry ::= SEQUENCE {
docsQosPHSField OCTET STRING,
docsQosPHSMask OCTET STRING,
docsQosPHSSize Integer32,
docsQosPHSVerify TruthValue,
docsQosPHSClassifierIndex Integer32,
docsQosPHSIndex Integer32
}
-- docsQosPHSIndex { docsQosPHSEntry 1 } was
-- moved to docsQosPHSIndex { docsQosPHSEntry 7 }
-- in an ealier revisions of the mib.
docsQosPHSField OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression field defines the
bytes of the header which must be
suppressed/restored by the sending/receiving
device.
The number of octets in this object should be
the same as the value of docsQosPHSSize."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.10.1"
::= { docsQosPHSEntry 2 }
docsQosPHSMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression mask defines the
bit mask which used in combination with the
docsQosPHSField defines which bytes in header
must be suppressed/restored by the sending or
receiving device.
Each bit of this bit mask corresponds to a byte
in the docsQosPHSField, with the least
significant bit corresponding to first byte of
the docsQosPHSField.
Each bit of the bit mask specifies whether of
not the corresponding byte should be suppressed
in the packet. A bit value of '1' indicates that
the byte should be suppressed by the sending
device and restored by the receiving device.
A bit value of '0' indicates that
the byte should not be suppressed by the sending
device or restored by the receiving device.
If the bit mask does not contain a bit for each
byte in the docsQosPHSField then the bit mask is
extended with bit values of '1' to be the
necessary length."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.10.3"
::= { docsQosPHSEntry 3 }
docsQosPHSSize OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression size specifies the
number of bytes in the header to be suppressed
and restored.
The value of this object must match the number
of bytes in the docsQosPHSField."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.10.4"
::= { docsQosPHSEntry 4 }
docsQosPHSVerify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression verification value of
'true' the sender must verify docsQosPHSField
is the same as what is contained in the packet
to be suppressed."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.10.5"
::= { docsQosPHSEntry 5 }
docsQosPHSClassifierIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "This object is obsolete."
::= { docsQosPHSEntry 6 }
docsQosPHSIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression index uniquely
references the PHS rule for a given service flow."
REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.2.10.2"
::= { docsQosPHSEntry 7 }
--
-- docsQosCmtsMacToSrvFlowTable (CMTS Only)
--
docsQosCmtsMacToSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provide for referencing the service flows
associated with a particular cable modem. This allows
for indexing into other docsQos tables that are
indexed by docsQosServiceFlowId and ifIndex."
::= { docsQosMIBObjects 11 }
docsQosCmtsMacToSrvFlowEntry OBJECT-TYPE
SYNTAX DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created by CMTS for each service flow
connected to this CMTS."
INDEX {
docsQosCmtsCmMac,
docsQosCmtsServiceFlowId
}
::= { docsQosCmtsMacToSrvFlowTable 1 }
DocsQosCmtsMacToSrvFlowEntry ::= SEQUENCE {
docsQosCmtsCmMac MacAddress,
docsQosCmtsServiceFlowId Unsigned32,
docsQosCmtsIfIndex InterfaceIndex
}
docsQosCmtsCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address for the referenced CM."
::= { docsQosCmtsMacToSrvFlowEntry 1 }
docsQosCmtsServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index assigned to a service flow by CMTS."
::= { docsQosCmtsMacToSrvFlowEntry 2 }
docsQosCmtsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of ifType docsCableMacLayter(127)
on the CMTS that is connected to the Cable Modem."
::= { docsQosCmtsMacToSrvFlowEntry 3 }
--
-- Placeholder for notifications/traps.
--
docsQosNotification OBJECT IDENTIFIER ::= { docsQosMIB 2 }
--
-- Conformance definitions
--
docsQosConformance OBJECT IDENTIFIER ::= { docsQosMIB 3 }
docsQosGroups OBJECT IDENTIFIER ::= { docsQosConformance 1 }
docsQosCompliances OBJECT IDENTIFIER ::= { docsQosConformance 2 }
docsQosCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for MCNS Cable Modems and
Cable Modem Termination Systems that implement DOCSIS
Service Flows."
MODULE -- docsQosMIB
MANDATORY-GROUPS { docsQosBaseGroup }
GROUP docsQosCmtsGroup
DESCRIPTION
"This group is mandatory for only Cable Modem Termination
Systems (CMTS) and not implemented for Cable Modems."
GROUP docsQosParamSetGroup
DESCRIPTION
"This group is mandatory for Cable Modem Termination
Systems (CMTS) and Cable Modems. Cable modems only implement
objects in this group as read-only."
GROUP docsQosSrvClassPolicyGroup
DESCRIPTION
"This group is optional for Cable Modem Termination
Systems (CMTS) and Cable Modems. This group only needs to
be implement if policy based service flow classification
is implemented. See docsDevPolicyTable in
DOCS-CABLE-DEVICE-MIB for more details. "
GROUP docsQosServiceClassGroup
DESCRIPTION
"The docsQosServiceClassTable group of objects. "
OBJECT docsQosPktClassPkts
DESCRIPTION
"This object only needs to be implemented in entries
that are classifying packets and not policing packets."
OBJECT docsQosPktClassInetSourceAddrType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetSourceAddr
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetSourceMaskType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetSourceMask
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetDestAddrType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetDestAddr
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetDestMaskType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
address."
OBJECT docsQosPktClassInetDestMask
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
address."
::= { docsQosCompliances 1 }
docsQosBaseGroup OBJECT-GROUP
OBJECTS {
docsQosPktClassDirection,
docsQosPktClassPriority,
docsQosPktClassIpTosLow,
docsQosPktClassIpTosHigh,
docsQosPktClassIpTosMask,
docsQosPktClassIpProtocol,
docsQosPktClassSourcePortStart,
docsQosPktClassSourcePortEnd,
docsQosPktClassDestPortStart,
docsQosPktClassDestPortEnd,
docsQosPktClassDestMacAddr,
docsQosPktClassDestMacMask,
docsQosPktClassSourceMacAddr,
docsQosPktClassEnetProtocolType,
docsQosPktClassEnetProtocol,
docsQosPktClassUserPriLow,
docsQosPktClassUserPriHigh,
docsQosPktClassVlanId,
docsQosPktClassState,
docsQosPktClassPkts,
docsQosPktClassBitMap,
docsQosPktClassInetSourceAddrType,
docsQosPktClassInetSourceAddr,
docsQosPktClassInetSourceMaskType,
docsQosPktClassInetSourceMask,
docsQosPktClassInetDestAddrType,
docsQosPktClassInetDestAddr,
docsQosPktClassInetDestMaskType,
docsQosPktClassInetDestMask,
docsQosServiceFlowSID,
docsQosServiceFlowDirection,
docsQosServiceFlowPrimary,
docsQosServiceFlowPkts, -- not sure if CM should implement
docsQosServiceFlowOctets,
docsQosServiceFlowTimeCreated,
docsQosServiceFlowTimeActive,
docsQosServiceFlowPHSUnknowns,
docsQosServiceFlowPolicedDropPkts,
docsQosServiceFlowPolicedDelayPkts,
docsQosDSAReqs,
docsQosDSARsps,
docsQosDSAAcks,
docsQosDSCReqs,
docsQosDSCRsps,
docsQosDSCAcks,
docsQosDSDReqs,
docsQosDSDRsps,
docsQosDynamicAdds,
docsQosDynamicAddFails,
docsQosDynamicChanges,
docsQosDynamicChangeFails,
docsQosDynamicDeletes,
docsQosDynamicDeleteFails,
docsQosDCCReqs,
docsQosDCCRsps,
docsQosDCCAcks,
docsQosDCCs,
docsQosDCCFails,
docsQosPHSField,
docsQosPHSMask,
docsQosPHSSize,
docsQosPHSVerify,
docsQosPHSIndex
}
STATUS current
DESCRIPTION
"Group of objects implemented in both Cable Modems and
Cable Modem Termination Systems."
::= { docsQosGroups 1 }
docsQosParamSetGroup OBJECT-GROUP
OBJECTS {
docsQosParamSetServiceClassName,
docsQosParamSetPriority,
docsQosParamSetMaxTrafficRate,
docsQosParamSetMaxTrafficBurst,
docsQosParamSetMinReservedRate,
docsQosParamSetMinReservedPkt,
docsQosParamSetActiveTimeout,
docsQosParamSetAdmittedTimeout,
docsQosParamSetMaxConcatBurst,
docsQosParamSetSchedulingType,
docsQosParamSetNomPollInterval,
docsQosParamSetTolPollJitter,
docsQosParamSetUnsolicitGrantSize,
docsQosParamSetNomGrantInterval,
docsQosParamSetTolGrantJitter,
docsQosParamSetGrantsPerInterval,
docsQosParamSetTosAndMask,
docsQosParamSetTosOrMask,
docsQosParamSetMaxLatency,
docsQosParamSetRequestPolicyOct,
docsQosParamSetBitMap
}
STATUS current
DESCRIPTION
"Group of objects implemented in both Cable Modems and
Cable Modem Termination Systems for QOS parameter sets."
::= { docsQosGroups 2 }
docsQosCmtsGroup OBJECT-GROUP
OBJECTS {
docsQosUpstreamFragments,
docsQosUpstreamFragDiscards,
docsQosUpstreamConcatBursts,
docsQosServiceFlowLogIfIndex,
docsQosServiceFlowLogSFID,
docsQosServiceFlowLogCmMac,
docsQosServiceFlowLogPkts,
docsQosServiceFlowLogOctets,
docsQosServiceFlowLogTimeDeleted,
docsQosServiceFlowLogTimeCreated,
docsQosServiceFlowLogTimeActive,
docsQosServiceFlowLogDirection,
docsQosServiceFlowLogPrimary,
docsQosServiceFlowLogServiceClassName,
docsQosServiceFlowLogPolicedDropPkts,
docsQosServiceFlowLogPolicedDelayPkts,
docsQosServiceFlowLogControl,
docsQosCmtsIfIndex -- docsQosCmtsMacToSrvFlowTable required
}
STATUS current
DESCRIPTION
"Mandatory group of objects implemented only in the CMTS."
::= { docsQosGroups 3 }
docsQosSrvClassPolicyGroup OBJECT-GROUP
OBJECTS {
docsQosServiceClassPolicyName,
docsQosServiceClassPolicyRulePriority,
docsQosServiceClassPolicyStatus
}
STATUS current
DESCRIPTION
"Group of objects implemented in both Cable Modems and
Cable Modem Termination Systems when supporting policy based
service flows."
::= { docsQosGroups 4 }
docsQosServiceClassGroup OBJECT-GROUP
OBJECTS {
docsQosServiceClassStatus,
docsQosServiceClassPriority,
docsQosServiceClassMaxTrafficRate,
docsQosServiceClassMaxTrafficBurst,
docsQosServiceClassMinReservedRate,
docsQosServiceClassMinReservedPkt,
docsQosServiceClassMaxConcatBurst,
docsQosServiceClassNomPollInterval,
docsQosServiceClassTolPollJitter,
docsQosServiceClassUnsolicitGrantSize,
docsQosServiceClassNomGrantInterval,
docsQosServiceClassTolGrantJitter,
docsQosServiceClassGrantsPerInterval,
docsQosServiceClassMaxLatency,
docsQosServiceClassActiveTimeout,
docsQosServiceClassAdmittedTimeout,
docsQosServiceClassSchedulingType,
docsQosServiceClassRequestPolicy,
docsQosServiceClassTosAndMask,
docsQosServiceClassTosOrMask,
docsQosServiceClassDirection
}
STATUS current
DESCRIPTION
"The docsQosServiceClassTable objects. If a CMTS implements
expansion of Service Class Names in a QOS Parameter Set,
this group is mandatory on the CMTS. If the CMTS does not
support Service Class Names, this group may be unimplemented
in the CMTS. This group is not implemented on the CM.
"
::= { docsQosGroups 5 }
docsQosDeprecatedGroup OBJECT-GROUP
OBJECTS {
docsQosPktClassIpSourceAddr,
docsQosPktClassIpSourceMask,
docsQosPktClassIpDestAddr,
docsQosPktClassIpDestMask
}
STATUS deprecated
DESCRIPTION
"This is a collection of deprecated DOCS-QOS-MIB objects."
::= { docsQosGroups 6 }
docsQosObsoleteGroup OBJECT-GROUP
OBJECTS {
docsQosPktClassUserPriApplies,
docsQosServiceFlowProvisionedParamSetIndex,
docsQosServiceFlowAdmittedParamSetIndex,
docsQosServiceFlowActiveParamSetIndex,
docsQosServiceFlowActiveTimeout,
docsQosServiceFlowAdmittedTimeout,
docsQosServiceFlowSchedulingType,
docsQosServiceFlowRequestPolicy,
docsQosServiceFlowTosAndMask,
docsQosServiceFlowTosOrMask,
docsQosServiceClassParamSetIndex,
docsQosPHSClassifierIndex
}
STATUS obsolete
DESCRIPTION
"This is a collection of obsolete DOCS-QOS-MIB objects."
::= { docsQosGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink