snmp_mib_archive/DOCS-MCAST-AUTH-MIB.my 2

DOCS-MCAST-AUTH-MIB DEFINITIONS ::= BEGIN
  IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Unsigned32
             FROM SNMPv2-SMI          -- RFC 2578
    RowStatus
             FROM SNMPv2-TC           -- RFC 2579
    OBJECT-GROUP,
    MODULE-COMPLIANCE
             FROM SNMPv2-CONF         -- RFC 2580
    SnmpAdminString
             FROM SNMP-FRAMEWORK-MIB  -- RFC 3411
    InetAddressType,
    InetAddress,
    InetAddressPrefixLength
             FROM INET-ADDRESS-MIB    -- RFC 4001
    SnmpTagList
             FROM SNMP-TARGET-MIB     -- RFC 3411
    docsIf3CmtsCmRegStatusId
             FROM DOCS-IF3-MIB
    clabProjDocsis
             FROM CLAB-DEF-MIB;

docsMcastAuthMib MODULE-IDENTITY
     LAST-UPDATED    "200712060000Z" -- December 6, 2007
     ORGANIZATION    "Cable Television Laboratories, Inc."
     CONTACT-INFO
         "
         Postal: Cable Television Laboratories, Inc.
         858 Coal Creek Circle
         Louisville, Colorado 80027-9750
         U.S.A.
         Phone: +1 303-661-9100
         Fax:   +1 303-661-9199
         E-mail: mibs@cablelabs.com"
     DESCRIPTION
        "This MIB module contains the management objects for the
        management of the CMTS Multicast Authorization Module.
        Copyright 1999-2007 Cable Television Laboratories, Inc.
        All rights reserved."
     REVISION        "200712060000Z" -- December 6, 2007
     DESCRIPTION
        "Revised version includes ECN
         OSSIv3.0-N-07.0551-4 and published as I05."
     REVISION        "200612071700Z" -- Dec 7, 2006
     DESCRIPTION
        "Initial version, published as part of the CableLabs
        OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207."
     ::= {  clabProjDocsis 19}

-- Textual Conventions

-- Object Definitions
docsMcastAuthMibObjects  OBJECT IDENTIFIER ::= { docsMcastAuthMib 1 }

docsMcastAuthCtrl OBJECT IDENTIFIER ::= { docsMcastAuthMibObjects 1 }

docsMcastAuthCtrlEnable OBJECT-TYPE
     SYNTAX      INTEGER {
                           enable(1),
                           disable(2)
                         }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "This attribute enables the enforcement of Multicast
        Autorization feature. When this attribute is set
        to 'enable' Multicast Authorization is enforced;
        otherwise clients are permitted to join any IP multicast
        session. The factory default value of this attribute
        is 'disable'."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast
         Join Authorization section."
     DEFVAL { disable }
     ::= { docsMcastAuthCtrl 1 }

docsMcastAuthCtrlDefProfileNameList OBJECT-TYPE
     SYNTAX      SnmpTagList
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "When IP Multicast Authorization is enforced, this
        attribute provides the default set of Multicast Authorization
        Profiles the CMTS enforces for a CM in the
        case that this CM didn't signal a set of profiles during
        the registration process.  If the Default Multicast
        Authorization Group Name is zero length string,
        the DefAction attribute determines whether a join request
        is authorized when a CM registers without a Multicast
        Authorization Profile Set or a list of config
        File Session Rules. If the CMTS supports more than 1
        profile name as a default, the CMTS enforces each of the
        profiles in order until the maximum number of profiles
        is reached. This attribute indicates one or more
        Multicast Authorization Profiles."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast 
         Profile Name Subtype section."
     DEFVAL { ''H }
     ::= { docsMcastAuthCtrl 2 }

docsMcastAuthCtrlDefAction OBJECT-TYPE
     SYNTAX      INTEGER {
                           permit(1),
                           deny(2)
                         }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "This attribute defines the default authorization
        action when no IP Multicast Session Rule is determined
        to match a client's IP multicast join request."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Session Rules
         section."
     DEFVAL { deny }
     ::= { docsMcastAuthCtrl 3 }

docsMcastAuthCtrlDefMaxNumSess OBJECT-TYPE
     SYNTAX      Unsigned32 (0..65535)
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
        "This attribute indicates the default maximum number
        of multicast sessions that clients reached through
        a CM are allowed to join. If set to zero, the maximum
        number of sessions is not limited by the CMTS. A DefMaxNumSess
        value of 0 indicates that no dynamic joins
        are permitted."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Maximum Multicast 
         Sessions section."
     DEFVAL { 0 }
     ::= { docsMcastAuthCtrl 4 }

docsMcastAuthCmtsCmStatusTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF DocsMcastAuthCmtsCmStatusEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This object maintains per-CM status of Multicast
        Authorization policies to be applied to this CM. The
        CM acquires these policy parameters through the CM registration
        process, or in the absence of some or all
        of those parameters, from the Ctrl Object.
        This object is meaningful when the Control Enable attribute
        is set to 'enable'.
        In the process of authorizing a CM client's session request
        the CMTS must check rules defined in StaticSessRule
        object and then rules defined in ProfileSessRule
        object. In the case of multiple multicast session
        matches, the rule priority attribute defines the
        final selected session rule. The selection of a session
        rules when multiple matches have the same priority
        is vendor specific.
        The CMTS MAY report in the CmtsCmStatus object CMs that
        do not signal any IP Multicast Authorization Encodings
        in the registration process. "
     ::= { docsMcastAuthMibObjects 2}

docsMcastAuthCmtsCmStatusEntry OBJECT-TYPE
     SYNTAX      DocsMcastAuthCmtsCmStatusEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "The conceptual row of docsMcastAuthCmtsCmStatus."
     INDEX {
             docsIf3CmtsCmRegStatusId
           }
     ::= { docsMcastAuthCmtsCmStatusTable 1 }

DocsMcastAuthCmtsCmStatusEntry ::= SEQUENCE {
     docsMcastAuthCmtsCmStatusCfgProfileNameList
                  SnmpTagList,
     docsMcastAuthCmtsCmStatusCfgListId
                  Unsigned32,
     docsMcastAuthCmtsCmStatusMaxNumSess
                  Unsigned32,
     docsMcastAuthCmtsCmStatusCfgParamFlag
                  BITS
     }

docsMcastAuthCmtsCmStatusCfgProfileNameList OBJECT-TYPE
     SYNTAX      SnmpTagList
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute indicates the set of Profile Names
        associated with the CM.
        This attribute indicates the CM signaled 'IP Multicast
        Authorization Profile Name' encodings during the
        CM registration process, or in the absence of instances
        of that config file parameter, the DefProfileNameList
        attribute from the Ctrl object."
     ::= { docsMcastAuthCmtsCmStatusEntry 1 }

docsMcastAuthCmtsCmStatusCfgListId OBJECT-TYPE
     SYNTAX      Unsigned32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies the reference to a CMTS
        created Session Rule List based on the CM signaled 'IP
        Multicast Authorization Static Session Rule' encodings.
        The CMTS may reuse this attribute value to reference
        more than one CM that have signaled the same list
        of Session Rules to the CMTS.
        The value zero indicates that the CM did not signal Multicast
        Session Rules to the CMTS or the CMTS does not
        support the StaticSessRule, in which case, the CMTS
        ignores any CM signalled Session Rule endocings during
        registration."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,IP Multicast Join 
         Authorization Static Session Rule Subtype section in the 
         Common Radio Frequency Interface Encodings Annex."
     ::= { docsMcastAuthCmtsCmStatusEntry 2 }

docsMcastAuthCmtsCmStatusMaxNumSess OBJECT-TYPE
     SYNTAX      Unsigned32 (0..65535)
     UNITS       "sessions"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute indicates the CM signaled value in
        Maximum Multicast Sessions Encoding during the CM registration
        process. If this value is missing the DefMaxNumSess
        attribute of the Ctrl object is used to determine
        the maximum number of multicast sessions this
        client may forward. The value 0 indicates that no
        dynamic joins are permitted. The value 65535 (the largest
        valid value) indicates that the CMTS permits any
        number of sessions to be joined by clients reached
        through the CM."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Maximum Multicast
         Sessions Encoding section in the Common Radio Frequency
         Interface Encodings Annex."
     ::= { docsMcastAuthCmtsCmStatusEntry 3 }

docsMcastAuthCmtsCmStatusCfgParamFlag OBJECT-TYPE
     SYNTAX      BITS {
                        profile(0),
                        staticMulticast(1),
                        maxNumSessions(2)
                         }
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute represents the functions that are
        activated through the registration process.
        The bit 'profile' indicates whether the CM signaled
        'IP Multicast Authorization Profile Name Subtype'
        encodings.
        The bit 'staticMulticast' indicates whether the CM
        signaled 'IP Multicast Authorization Static Session
        Rule Subtype' encodings.
        The bit 'maxNumSess' indicates whether the CM signaled
        the ' Maximum Multicast Sessions' encoding."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804"
     ::= { docsMcastAuthCmtsCmStatusEntry 4 }

docsMcastAuthProfileSessRuleTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF DocsMcastAuthProfileSessRuleEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This object defines Operator configured profiles
        to be matched during the authorization process.
        This object supports the creation and deletion of multiple
        instances.
        Creation of a new instance of this object requires the
        following attributes to be set:
        PrefixAddrType
        SrcPrefixAddr
        SrcPrefixLen
        GrpPrefixAddr
        GrpPrefixLen."
     ::= { docsMcastAuthMibObjects 3}

docsMcastAuthProfileSessRuleEntry OBJECT-TYPE
     SYNTAX      DocsMcastAuthProfileSessRuleEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "The conceptual row of docsMcastAuthProfileSessRule.
         The CMTS persists all instances of the ProfileSessRule
         object across reinitializations."
     INDEX {
             docsMcastAuthProfilesName,
             docsMcastAuthProfileSessRuleId
           }
     ::= { docsMcastAuthProfileSessRuleTable 1 }

DocsMcastAuthProfileSessRuleEntry ::= SEQUENCE {
     docsMcastAuthProfileSessRuleId
                  Unsigned32,
     docsMcastAuthProfileSessRulePriority
                  Unsigned32,
     docsMcastAuthProfileSessRulePrefixAddrType
                  InetAddressType,
     docsMcastAuthProfileSessRuleSrcPrefixAddr
                  InetAddress,
     docsMcastAuthProfileSessRuleSrcPrefixLen
                  InetAddressPrefixLength,
     docsMcastAuthProfileSessRuleGrpPrefixAddr
                  InetAddress,
     docsMcastAuthProfileSessRuleGrpPrefixLen
                  InetAddressPrefixLength,
     docsMcastAuthProfileSessRuleAction
                  INTEGER,
     docsMcastAuthProfileSessRuleRowStatus
                  RowStatus
     }

docsMcastAuthProfileSessRuleId OBJECT-TYPE
     SYNTAX      Unsigned32 (1..4294967295)
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This attribute provides a unique identifier for each
        CMTS configured Multicast Authorization Profile
        Session rule within a Multicast Authorization Profile
        Name."
     ::= { docsMcastAuthProfileSessRuleEntry 1 }

docsMcastAuthProfileSessRulePriority OBJECT-TYPE
     SYNTAX      Unsigned32 (0..255)
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute configures the rule priority for the
        static session rule. Permitted values for this attribute
        range from 0..255. Higher values indicate a
        higher priority. If more than one session rule matches
        a joined session, the session rule with the highest
        rule priority determines the authorization action."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Session Rules
         section."
     ::= { docsMcastAuthProfileSessRuleEntry 2 }

docsMcastAuthProfileSessRulePrefixAddrType OBJECT-TYPE
     SYNTAX      InetAddressType
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute identifies the address family for
        the multicast session (S,G) which corresponds to the
        SrcPrefixAddr and GrpPrefixAddr attributes respectively."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Session Rules
         section."
     ::= { docsMcastAuthProfileSessRuleEntry 3 }

docsMcastAuthProfileSessRuleSrcPrefixAddr OBJECT-TYPE
     SYNTAX      InetAddress
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute identifies a specific Multicast Source
        Address defined for  this rule.  A Source Address
        that is all zeros is defined as 'all source addresses'
         (*, G).   Source prefix addresses are unicast addresses."
     REFERENCE
        "RFC 3569.
         RFC 3306"
     ::= { docsMcastAuthProfileSessRuleEntry 4 }

docsMcastAuthProfileSessRuleSrcPrefixLen OBJECT-TYPE
     SYNTAX      InetAddressPrefixLength
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        Source (S) IP multicast group addresses. For Group or
        ASM based sessions this attribute is set to 0."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Session Rules
         section."
     ::= { docsMcastAuthProfileSessRuleEntry 5 }

docsMcastAuthProfileSessRuleGrpPrefixAddr OBJECT-TYPE
     SYNTAX      InetAddress
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        destination IP multicast group addresses."
     ::= { docsMcastAuthProfileSessRuleEntry 6 }

docsMcastAuthProfileSessRuleGrpPrefixLen OBJECT-TYPE
     SYNTAX      InetAddressPrefixLength
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        IP multicast group addresses."
     ::= { docsMcastAuthProfileSessRuleEntry 7 }

docsMcastAuthProfileSessRuleAction OBJECT-TYPE
     SYNTAX      INTEGER {
                           accept(1),
                           deny(2)
                         }
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute specifies the authorization action
        for a session join attempt that matches the session
        rule.
        The value 'accept' indicates that the rule permits a
        matching multicast join request is allowed .  The value
        'deny' indicates that a matching multicast join request
        is denied."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Session Rules
         section."
     DEFVAL { deny }
     ::= { docsMcastAuthProfileSessRuleEntry 8 }

docsMcastAuthProfileSessRuleRowStatus OBJECT-TYPE
     SYNTAX      RowStatus
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "The status of this instance."
     ::= { docsMcastAuthProfileSessRuleEntry 9 }

docsMcastAuthStaticSessRuleTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF DocsMcastAuthStaticSessRuleEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This object defines the Session authorization Rules
        based on the CM or group of CMs signaled in IP Multicast
        Join Authorization Static Session Subtype encoding
         This object reflects the Static Session rules
        that were included in the CM registration request message."
     ::= { docsMcastAuthMibObjects 4}

docsMcastAuthStaticSessRuleEntry OBJECT-TYPE
     SYNTAX      DocsMcastAuthStaticSessRuleEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "The conceptual row of docsMcastAuthStaticSessRule.
         The CMTS may persist all instances of the StaticSessRule
         object across reinitializations."
     INDEX {
             docsMcastAuthStaticSessRuleCfgListId,
             docsMcastAuthStaticSessRuleId
           }
     ::= { docsMcastAuthStaticSessRuleTable 1 }

DocsMcastAuthStaticSessRuleEntry ::= SEQUENCE {
     docsMcastAuthStaticSessRuleCfgListId
                  Unsigned32,
     docsMcastAuthStaticSessRuleId
                  Unsigned32,
     docsMcastAuthStaticSessRulePriority
                  Unsigned32,
     docsMcastAuthStaticSessRulePrefixAddrType
                  InetAddressType,
     docsMcastAuthStaticSessRuleSrcPrefixAddr
                  InetAddress,
     docsMcastAuthStaticSessRuleSrcPrefixLen
                  InetAddressPrefixLength,
     docsMcastAuthStaticSessRuleGrpPrefixAddr
                  InetAddress,
     docsMcastAuthStaticSessRuleGrpPrefixLen
                  InetAddressPrefixLength,
     docsMcastAuthStaticSessRuleAction
                  INTEGER
     }

docsMcastAuthStaticSessRuleCfgListId OBJECT-TYPE
     SYNTAX      Unsigned32 (1..4294967295)
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This attribute contains a CMTS-derived value for
        a set of multicast static session rules associated to
        one or more CMs."
     ::= { docsMcastAuthStaticSessRuleEntry 1 }

docsMcastAuthStaticSessRuleId OBJECT-TYPE
     SYNTAX      Unsigned32 (1..4294967295)
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This attribute provides an identifier for each Multicast
        Authorization Static Session rule in the IP
        Multicast Join Authorization Static Session SubType
        communicated by a CM or group of CMs during registration."
     ::= { docsMcastAuthStaticSessRuleEntry 2 }

docsMcastAuthStaticSessRulePriority OBJECT-TYPE
     SYNTAX      Unsigned32 (0..255)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute defines the rule priority for the static
        session rule. Higher values indicate a higher
        priority. If more than one session rule matches a joined
        session, the session rule with the highest rule priority
        determines the authorization action."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, RulePriority
         section in the Common Radio Frequency Interface Encodings
         Annex."
     ::= { docsMcastAuthStaticSessRuleEntry 3 }

docsMcastAuthStaticSessRulePrefixAddrType OBJECT-TYPE
     SYNTAX      InetAddressType
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies the address family for
        the multicast session (S,G) which corresponds to the
        SrcPrefixAddr and GrpPrefixAddr attributes respectively."
     ::= { docsMcastAuthStaticSessRuleEntry 4 }

docsMcastAuthStaticSessRuleSrcPrefixAddr OBJECT-TYPE
     SYNTAX      InetAddress
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies a specific Multicast Source
        Address defined for  this rule.  A Source Address
        that is all zeros is defined as 'all source addresses
         (*, G)'. Source Prefix Addresses are unicast host addresses."
     REFERENCE
        "RFC 3569.
         RFC 3306."
     ::= { docsMcastAuthStaticSessRuleEntry 5 }

docsMcastAuthStaticSessRuleSrcPrefixLen OBJECT-TYPE
     SYNTAX      InetAddressPrefixLength
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        Source (S) IP multicast group addresses. For ASM-based
        sessions, this attribute is set to 0."
     ::= { docsMcastAuthStaticSessRuleEntry 6 }

docsMcastAuthStaticSessRuleGrpPrefixAddr OBJECT-TYPE
     SYNTAX      InetAddress
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        destination IP multicast group addresses."
     ::= { docsMcastAuthStaticSessRuleEntry 7 }

docsMcastAuthStaticSessRuleGrpPrefixLen OBJECT-TYPE
     SYNTAX      InetAddressPrefixLength
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute identifies the prefix of a range of
        IP multicast group addresses."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804,Group Prefix
         Length Subtype section in the Common Radio Frequency
         Interface Encodings Annex."
     ::= { docsMcastAuthStaticSessRuleEntry 8 }

docsMcastAuthStaticSessRuleAction OBJECT-TYPE
     SYNTAX      INTEGER {
                           permit(1),
                           deny(2)
                         }
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
        "This attribute specifies the authorization action
        for a session join attempt that matches the session
        rule.
        The value 'accept' indicates that the rule permits a
        matching multicast join request is allowed.  The value
        'deny' indicates that a matching multicast join request
        is denied."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, Authorization 
         Action section in the Common Radio Frequency Interface
          Encodings Annex."
     ::= { docsMcastAuthStaticSessRuleEntry 9 }

docsMcastAuthProfilesTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF DocsMcastAuthProfilesEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This object contains the description of the Multicast
        Authorization profiles for administrative purposes.

        This object supports the creation and deletion of multiple
        instances.
        Creation of a new instance of this object requires the
        Description attribute to be set."
     ::= { docsMcastAuthMibObjects 5}

docsMcastAuthProfilesEntry OBJECT-TYPE
     SYNTAX      DocsMcastAuthProfilesEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
         "The conceptual row of docsMcastAuthProfiles.
         The CMTS persists all instances of the Profiles
         object across reinitializations"
     INDEX {
             docsMcastAuthProfilesName
           }
     ::= { docsMcastAuthProfilesTable 1 }

DocsMcastAuthProfilesEntry ::= SEQUENCE {
     docsMcastAuthProfilesName
                  SnmpAdminString,
     docsMcastAuthProfilesDescription
                  SnmpAdminString,
     docsMcastAuthProfilesRowStatus
                  RowStatus
     }

docsMcastAuthProfilesName OBJECT-TYPE
     SYNTAX      SnmpAdminString (SIZE (1..15))
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "This attribute is a unique name or identifier for a
        Multicast Authorization Profile."
     ::= { docsMcastAuthProfilesEntry 1 }

docsMcastAuthProfilesDescription OBJECT-TYPE
     SYNTAX      SnmpAdminString
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "This attribute is a human readable description of
        the Multicast Authorization Profile."
     REFERENCE
        "DOCSIS 3.0 MAC and Upper Layer Protocols Interface
         Specification CM-SP-MULPIv3.0-I01-060804, IP Multicast 
         Profile Name Subtype section."
     ::= { docsMcastAuthProfilesEntry 2 }

docsMcastAuthProfilesRowStatus OBJECT-TYPE
     SYNTAX      RowStatus
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
        "The status of this instance."
     ::= { docsMcastAuthProfilesEntry 3 }

-- Conformance Definitions
docsMcastAuthMibConformance OBJECT IDENTIFIER ::= { docsMcastAuthMib 2 }
docsMcastAuthMibCompliances OBJECT IDENTIFIER
                                   ::= { docsMcastAuthMibConformance 1 }
docsMcastAuthMibGroups      OBJECT IDENTIFIER
                                   ::= { docsMcastAuthMibConformance 2 }

docsMcastAuthCompliance MODULE-COMPLIANCE
STATUS      current
DESCRIPTION
        "The compliance statement for devices that implement the DOCSIS
         Multicast Authorization MIB."

    MODULE -- this MODULE
MANDATORY-GROUPS {
     docsMcastAuthGroup
     }
::= { docsMcastAuthMibCompliances 1 }
docsMcastAuthGroup OBJECT-GROUP
    OBJECTS {
     docsMcastAuthCtrlEnable,
     docsMcastAuthCtrlDefProfileNameList,
     docsMcastAuthCtrlDefAction,
     docsMcastAuthCtrlDefMaxNumSess,
     docsMcastAuthCmtsCmStatusCfgProfileNameList,
     docsMcastAuthCmtsCmStatusCfgListId,
     docsMcastAuthCmtsCmStatusMaxNumSess,
     docsMcastAuthCmtsCmStatusCfgParamFlag,
     docsMcastAuthProfileSessRulePriority,
     docsMcastAuthProfileSessRulePrefixAddrType,
     docsMcastAuthProfileSessRuleSrcPrefixAddr,
     docsMcastAuthProfileSessRuleSrcPrefixLen,
     docsMcastAuthProfileSessRuleGrpPrefixAddr,
     docsMcastAuthProfileSessRuleGrpPrefixLen,
     docsMcastAuthProfileSessRuleAction,
     docsMcastAuthProfileSessRuleRowStatus,
     docsMcastAuthStaticSessRulePriority,
     docsMcastAuthStaticSessRulePrefixAddrType,
     docsMcastAuthStaticSessRuleSrcPrefixAddr,
     docsMcastAuthStaticSessRuleSrcPrefixLen,
     docsMcastAuthStaticSessRuleGrpPrefixAddr,
     docsMcastAuthStaticSessRuleGrpPrefixLen,
     docsMcastAuthStaticSessRuleAction,
     docsMcastAuthProfilesDescription,
     docsMcastAuthProfilesRowStatus
     }
    STATUS      current
    DESCRIPTION
         "Group of objects implemented in the CMTS."
    ::= { docsMcastAuthMibGroups 1 }
END