MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/DOCS-DSG-IF-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1020 lines
35 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- DOCS-DSG-IF-MIB.my:
--
-- Mar 2005 Jun Yan
--
-- Initial Version:
-- Mar 2005: DSG-InterfaceSpecification-CM-SP-DSG-I03-041124.pdf
--
-- Copyright (c) 2005 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
DSG-IF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
TruthValue,
MacAddress,
RowStatus
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
InetAddressType,
InetAddress,
InetAddressPrefixLength,
InetPortNumber
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex,
ifIndex
FROM IF-MIB
clabProjDocsis
FROM CLAB-DEF-MIB;
dsgIfMIB MODULE-IDENTITY
LAST-UPDATED "200411240000Z" -- November 24, 2004
ORGANIZATION "Cable Television Laboratories, Inc"
CONTACT-INFO
"Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027
U.S.A.
Phone : +1 303-661-9100
Fax : +1 303-661-9199
E-mail: "
DESCRIPTION
"This is the MIB Module for the DOCSIS Set-top Gateway
(DSG). The DSG provides a one-way IP datagram transport
for Out-Of-Band (OOB) messaging to cable set-top clients.
The one-way IP datagram transport is called a DSG Tunnel.
A DSG Tunnel carrying either a broadcast, unicast or
multicast IP datagram stream originating at the DOCSIS
Set-top Gateway and carrying Out-Of-Band messages intended
for set-top clients. It is carried over one or more
downstream DOCSIS channels.
Multiple DSG tunnels may exist on a single downstream
DOCSIS channel."
REVISION "200408040000Z"
DESCRIPTION
"Initial revision, published as part of DOCSIS Set-top
Gateway Specification."
::= { clabProjDocsis 3 }
dsgIfMIBNotifications OBJECT IDENTIFIER ::= { dsgIfMIB 0 }
dsgIfMIBObjects OBJECT IDENTIFIER ::= { dsgIfMIB 1 }
dsgIfMIBConformance OBJECT IDENTIFIER ::= { dsgIfMIB 2 }
dsgIfClassifier OBJECT IDENTIFIER ::= { dsgIfMIBObjects 1 }
dsgIfTunnel OBJECT IDENTIFIER ::= { dsgIfMIBObjects 2 }
dsgIfTunnelGrpToChannel OBJECT IDENTIFIER ::= { dsgIfMIBObjects 3 }
dsgIfDownstreamChannel OBJECT IDENTIFIER ::= { dsgIfMIBObjects 4 }
dsgIfDCD OBJECT IDENTIFIER ::= { dsgIfMIBObjects 5 }
----------------------------------------------------------------------
--The Classifier Table contains objects for classifying packets.
--The DSG Agent applies the DSG classifier parameters to the inbound
--packets from the DSG server in order to assign the packet to the
--appropriate DSG tunnel. The DSG Agent must classify incoming
--packets based upon the objects in this table with the exception of
--the dsgIfClassDestPortStart and dsgIfClassDestPortEnd objects.
--
--The DSG Agent must also include these encoding in the DCD messages on
--the downstream channels to which the classifiers apply.
--
--The DSG classifier is unique per DSG Agent.
------------------------------------------------------------------------
dsgIfClassifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfClassifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Classifier Table contains attributes use to classify
inbound packets into the tunnel and classifiers for the DSG
clients, encoding in the DCD messages on the downstream
channels to which the classifiers apply."
::= { dsgIfClassifier 1 }
dsgIfClassifierEntry OBJECT-TYPE
SYNTAX DsgIfClassifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Classifier Table. Rows are created
by an SNMP SET request setting the value of
dsgIfClassRowStatus to 'createAndGo'. Each entry is created
for a tunnel, index by dsgTunnelIndex.
Rows are deleted by an SNMP SET request setting the value
of dsgIfClassRowStatus to 'destroy'."
INDEX { dsgIfTunnelIndex, dsgIfClassId }
::= { dsgIfClassifierTable 1 }
DsgIfClassifierEntry ::= SEQUENCE {
dsgIfClassId Unsigned32,
dsgIfClassPriority Unsigned32,
dsgIfClassSrcIpAddrType InetAddressType,
dsgIfClassSrcIpAddr InetAddress,
dsgIfClassSrcIpPrefixLength InetAddressPrefixLength,
dsgIfClassDestIpAddressType InetAddressType,
dsgIfClassDestIpAddress InetAddress,
dsgIfClassDestPortStart InetPortNumber,
dsgIfClassDestPortEnd InetPortNumber,
dsgIfClassRowStatus RowStatus,
dsgIfClassIncludeInDCD TruthValue
}
dsgIfClassId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index that provides a unique classifier (in a DSG
Agent). This value corresponds to the Classifier ID TLV
in the DCD message."
::= { dsgIfClassifierEntry 1 }
dsgIfClassPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this classifier.
Default value 0 indicates lowest priority."
DEFVAL { 0 }
::= { dsgIfClassifierEntry 2 }
dsgIfClassSrcIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of internet address of dsgIfClassSrcIpAddress."
DEFVAL { ipv4 }
::= { dsgIfClassifierEntry 3 }
dsgIfClassSrcIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address to be matched for this classifier.
A value 0 for this object indicates a match of any IP
address. A value that contains non-zero bits
outside the range indicated by dsgIfClassSrcIpPrefixLength
is invalid and should be rejected."
DEFVAL { '00000000'h }
::= { dsgIfClassifierEntry 4 }
dsgIfClassSrcIpPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the CIDR Prefix carried in
dsgIfClassSrcIpAddr. In IPv4 addresses, a length of 32 indicates
a match of a single host address, and a length between
0 and 32 indicates the use of a CIDR Prefix. A length of
0 is not allowed. This object is irrelevant and not used
when dsgIfClassSrcIpAddr value is 0."
DEFVAL { 32 }
::= { dsgIfClassifierEntry 5 }
dsgIfClassDestIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of internet address of dsgIfClassDestIpAddress."
DEFVAL { ipv4 }
::= { dsgIfClassifierEntry 6 }
dsgIfClassDestIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address to be matched for this
classifier."
DEFVAL { '00000000'h }
::= { dsgIfClassifierEntry 7 }
dsgIfClassDestPortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the inclusive lower bound of the transport-layer
source port range that is to be matched."
DEFVAL { 0 }
::= { dsgIfClassifierEntry 8 }
dsgIfClassDestPortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the inclusive higher bound of the transport-layer
source port range that is to be matched."
DEFVAL { 65535 }
::= { dsgIfClassifierEntry 9 }
dsgIfClassRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row. A value of active(1) indicates
that this classifier is applied to this tunnel.
A value of notInService(2) indicates that matching of
the packets are ignored and this classifier parameters
will not be included in the DCD message."
::= { dsgIfClassifierEntry 10 }
dsgIfClassIncludeInDCD OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether or not this DSG Classifier will
be sent in DCD messages for use as a Layer-3 and
Layer-4 packet filter by the DSG eCM."
DEFVAL { false }
::= { dsgIfClassifierEntry 11 }
------------------------------------------------------------------------
-- The DSG Tunnel Table contains group(s) of DSG Tunnel Indexes.
-- Tunnel Entry is mapped to the destination MAC address and each
-- tunnel is associated to the Qos Service Class Name.
------------------------------------------------------------------------
dsgIfTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Tunnel Table contains group(s) of tunnel(s).
Each tunnel is associated to the destination MAC address."
::= { dsgIfTunnel 1 }
dsgIfTunnelEntry OBJECT-TYPE
SYNTAX DsgIfTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Tunnel Table. Rows are created by
an SNMP SET request setting the value of
dsgIfTunnelRowStatus to 'createAndGo'.
Each entry associated to a tunnel. A dsgIfTunnelGroupIndex
represents a group of tunnels that could be associated to
one or more downstream. Each dsgIfTunnelIndex represents
a tunnel.
Rows are deleted by an SNMP SET request setting the
value of dsgIfTunnelRowStatus to 'destroy'."
INDEX { dsgIfTunnelIndex }
::= { dsgIfTunnelTable 1 }
DsgIfTunnelEntry ::= SEQUENCE {
dsgIfTunnelIndex Unsigned32,
dsgIfTunnelGroupIndex Unsigned32,
dsgIfTunnelClientIdListIndex Unsigned32,
dsgIfTunnelMacAddress MacAddress,
dsgIfTunnelServiceClassName SnmpAdminString,
dsgIfTunnelRowStatus RowStatus
}
dsgIfTunnelIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into the DSG Tunnel table that represent
a tunnel."
::= { dsgIfTunnelEntry 1 }
dsgIfTunnelGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This index represents a group of tunnels that could be
associated to one or more downstream which mapped
to dsgIfTunnelGrpIndex."
::= { dsgIfTunnelEntry 2 }
dsgIfTunnelClientIdListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This index represents a group of client id(s)
which mapped to dsgIfClientIdListIndex."
::= { dsgIfTunnelEntry 3 }
dsgIfTunnelMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSG tunnel destination MAC address."
DEFVAL { '000000000000'h }
::= { dsgIfTunnelEntry 4 }
dsgIfTunnelServiceClassName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Service Class Name that associated to the
docsQosServiceClassName(in DOCS-QOS-MIB). Creation of a
Service Class MUST be configured through the
docsQosServiceClassTable. Only partial of the
docsQosServiceClassTable objects are applicable to the
DSG service class thus some are ignored.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is a zero length string."
REFERENCE "SP-RFIv1.1-I10-030730, Appendix C.2.2.3.4"
::= { dsgIfTunnelEntry 5 }
dsgIfTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row. A value of notInService(2)
indicates that this tunnel is disabled and no OOB traffic
will be forwarded to DSG clients and this tunnel parameters
will not be included in the DCD message."
::= { dsgIfTunnelEntry 6}
-----------------------------------------------------------------------
--The DSG Tunnel Group to Channel Table contains the association of
--groups of tunnels to one or more downstream channels. This table
--contains the downstream ifIndex, rule priority, ucid range and vendor
--parameter identification(2).
-----------------------------------------------------------------------
dsgIfTunnelGrpToChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfTunnelGrpToChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Tunnel Group to Channel Table associates a group
of tunnels to one or more downstream channel."
::= { dsgIfTunnelGrpToChannel 1 }
dsgIfTunnelGrpToChannelEntry OBJECT-TYPE
SYNTAX DsgIfTunnelGrpToChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Tunnel Table. Rows are created by
an SNMP SET request setting the value of
dsgIfTunnelGrpRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the
value of dsgIfTunnelRowStatus to 'destroy'."
INDEX { dsgIfTunnelGrpIndex, dsgIfTunnelGrpChannelIndex }
::= { dsgIfTunnelGrpToChannelTable 1 }
DsgIfTunnelGrpToChannelEntry ::= SEQUENCE {
dsgIfTunnelGrpIndex Unsigned32,
dsgIfTunnelGrpChannelIndex Unsigned32,
dsgIfTunnelGrpDsIfIndex InterfaceIndex,
dsgIfTunnelGrpRulePriority Unsigned32,
dsgIfTunnelGrpUcidList OCTET STRING,
dsgIfTunnelGrpVendorParamId Unsigned32,
dsgIfTunnelGrpRowStatus RowStatus
}
dsgIfTunnelGrpIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table."
::= { dsgIfTunnelGrpToChannelEntry 1 }
dsgIfTunnelGrpChannelIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table."
::= { dsgIfTunnelGrpToChannelEntry 2 }
dsgIfTunnelGrpDsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The downstream ifIndex that will be associated to
this group of tunnel(s)."
::= { dsgIfTunnelGrpToChannelEntry 3 }
dsgIfTunnelGrpRulePriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSG rule priority determines the order of which
channel and its associated UCIDs should be applied by
the DSG client. The default value is 0, which is the lowest
priority."
DEFVAL { 0 }
::= { dsgIfTunnelGrpToChannelEntry 4 }
dsgIfTunnelGrpUcidList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The list of Upstream Channel ID (UCID) values (octets)
for which the DSG rule applies. A DSG client matches this
parameter if its UCID value is included in the list. The
default value of zero length string indicates that this
DSG Rule applies to all DSG clients."
DEFVAL { "" }
::= { dsgIfTunnelGrpToChannelEntry 5 }
dsgIfTunnelGrpVendorParamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of vendor parameter, dsgIfVendorParamId in the
dsgIfVendorParamTable describing the vendor specific DSG
parameters. If no associated entry in dsgIfVendorParamTable
exists, this value is 0."
DEFVAL { 0 }
::= { dsgIfTunnelGrpToChannelEntry 6 }
dsgIfTunnelGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. The value of notInService(2)
indicates that this tunnel group is disabled and no OOB
traffic on all the associated tunnel(s) will be forwarded
to DSG clients and all parameters will not be included in
the DCD message."
::= { dsgIfTunnelGrpToChannelEntry 7 }
-----------------------------------------------------------------------
--The Downstream Table contains the DSG Tunnel Index, the timer
--index, specific vendor parameter identification(3) and the
--index to the downstream channel list.
-----------------------------------------------------------------------
dsgIfDownstreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Downstream Table contains the associated timers,
vendor specific parameters index and the channel list
index to a specific downstream."
::= { dsgIfDownstreamChannel 1 }
dsgIfDownstreamEntry OBJECT-TYPE
SYNTAX DsgIfDownstreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Downstream Table.
An entry in this table exists for each ifEntry with
an ifType of docsCableDownstream(128)."
INDEX { ifIndex }
::= { dsgIfDownstreamTable 1 }
DsgIfDownstreamEntry ::= SEQUENCE {
dsgIfDownTimerIndex Unsigned32,
dsgIfDownVendorParamId Unsigned32,
dsgIfDownChannelListIndex Unsigned32,
dsgIfDownEnableDCD TruthValue
}
dsgIfDownTimerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index into the timer table, dsgIfTimerTable providing
the timers used by the DSG client(s).
The default value 0 indicates there is no associated
timers that need to be sent in the DCD message."
DEFVAL { 0 }
::= { dsgIfDownstreamEntry 1 }
dsgIfDownVendorParamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of vendor parameter, dsgIfVendorParamId in the
dsgIfVendorParamTable describing the vendor specific DSG
parameters. If no associated entry in dsgIfVendorParamTable
exists, this value is 0."
DEFVAL { 0 }
::= { dsgIfDownstreamEntry 2 }
dsgIfDownChannelListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of a the downstream frequency channel lists,
dsgIfChannelListIndex in the dsgIfChannelListTable
providing the list of downstream frequencies that
contain DSG tunnels."
DEFVAL { 0 }
::= { dsgIfDownstreamEntry 3 }
dsgIfDownEnableDCD OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable DCD messages to be sent on this
downstream channel. The value is always true(1) for those
downstreams that contains one or many DSG Tunnels."
::= { dsgIfDownstreamEntry 4 }
-----------------------------------------------------------------------
--The Client Table contains the objects specifies the matching
--parameters for the DSG clients for which the DSG rules applies.
--The DSG clients recognized that ids may be originated from different
--address space. The same DSG client id may be used by multiple rules.
-----------------------------------------------------------------------
dsgIfClientIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfClientIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Client Identification Table contains the client
identification type and value. It also contains the
vendor specific parameter identification. There could
be multiple client ids associated to a tunnel, grouped
by the dsgIfClientIdListIndex."
::= { dsgIfDCD 1 }
dsgIfClientIdEntry OBJECT-TYPE
SYNTAX DsgIfClientIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Client Id Table. Rows are created
by an SNMP SET request setting the value of
dsgIfClientRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the
value of dsgIfClientIdRowStatus to 'destroy'."
INDEX { dsgIfClientIdListIndex, dsgIfClientIdIndex }
::= { dsgIfClientIdTable 1 }
DsgIfClientIdEntry ::= SEQUENCE {
dsgIfClientIdListIndex Unsigned32,
dsgIfClientIdIndex Unsigned32,
dsgIfClientIdType INTEGER,
dsgIfClientIdValue OCTET STRING,
dsgIfClientVendorParamId Unsigned32,
dsgIfClientRowStatus RowStatus
}
dsgIfClientIdListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to this table."
::= { dsgIfClientIdEntry 1 }
dsgIfClientIdIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to each entry of the Client Id."
::= { dsgIfClientIdEntry 2 }
dsgIfClientIdType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
macAddress(2),
caSystemId(3),
applicationId(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Client Identification type. A DSG client id of type
broadcast(1) received by all DSG client(s). A DSG client
id of type macAddress(2) is received by the DSG client that
has been assigned with this MAC address where the first 3
bytes is the Organization Unique Identifier (OUI). A DSG
client id of type caSystemId(3) is received by the DSG
client that has been assigned a CA_system_ID. A DSG client
id of type applicationId(4) is received by the DSG client
that has been assigned an application ID."
DEFVAL { broadcast }
::= { dsgIfClientIdEntry 3 }
dsgIfClientIdValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Client Identification Value. The content depends on
the value of the dsgIfClientIdType. The dsgIfClientIdType
of a type broadcast(1), the value is empty string. The type
of macAddress(2), the value represents the well known MAC
address. The type of caSystemId(3) the value represents the
CA System Id. The type of applicationId(4) the value
represents the application Id."
DEFVAL { '000000000000'h }
::= { dsgIfClientIdEntry 4 }
dsgIfClientVendorParamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the vendor parameter id, dsgIfVendorParamId
in the dsgIfVendorParamTable describing the vendor specific
DSG parameters. If no associated entry in
dsgIfVendorParamTable exists, this value is 0."
DEFVAL { 0 }
::= { dsgIfClientIdEntry 5 }
dsgIfClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { dsgIfClientIdEntry 6 }
-----------------------------------------------------------------------
--The Vendor Parameter Table contains vendor specific parameters
--which allows vendors to send the specific parameters within a
--DSG rule or within the DSG Configuration block in a DCD message.
-----------------------------------------------------------------------
dsgIfVendorParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfVendorParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Vendor Parameter Table allows vendors to send
specific parameters to the DSG clients within a DSG
rule or within the DSG Configuration block in a
DCD message."
::= { dsgIfDCD 2 }
dsgIfVendorParamEntry OBJECT-TYPE
SYNTAX DsgIfVendorParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Vendor Parameter Table. Rows are
created by an SNMP SET request setting the value of
dsgIfVendorRowStatus to 'createAndGo'. Each entry
represents one or more vendor<6F><72>s specific parameters.
Rows are deleted by an SNMP SET request setting the
value of dsgIfVendorRowStatus to 'destroy'.
There are limits to the amount of vendor specific
information that can be carried in a DSG Rule or
DSG Configuration block. An SNMP SET request which
would result in these limits being exceeded should be
rejected."
INDEX { dsgIfVendorParamId, dsgIfVendorIndex }
::= { dsgIfVendorParamTable 1 }
DsgIfVendorParamEntry ::= SEQUENCE {
dsgIfVendorParamId Unsigned32,
dsgIfVendorIndex Unsigned32,
dsgIfVendorOUI OCTET STRING,
dsgIfVendorValue OCTET STRING,
dsgIfVendorRowStatus RowStatus
}
dsgIfVendorParamId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the table."
::= { dsgIfVendorParamEntry 1 }
dsgIfVendorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vendor Specific Index."
::= { dsgIfVendorParamEntry 2 }
dsgIfVendorOUI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vendor assigned Organization Unique Id (OUI)."
DEFVAL { '000000'h }
::= { dsgIfVendorParamEntry 3 }
dsgIfVendorValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..50))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vendor Specific Parameter Value."
DEFVAL { "" }
::= { dsgIfVendorParamEntry 4 }
dsgIfVendorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { dsgIfVendorParamEntry 5 }
-----------------------------------------------------------------------
--The Channel List Table contains lists of one or multiple
--downstream frequencies that are carrying DSG tunnels. The
--appropriate DSG Channel List will be included in the DCD
--message on the associated downstream channel from the
--dsgIfDownstreamTable.
--The DSG Client uses this list to determine which downstream
--frequencies have DSG Tunnels present.
-----------------------------------------------------------------------
dsgIfChannelListTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfChannelListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Channel List Table contains list of one or
multiple downstream frequencies that are carrying DSG
tunnel(s)."
::= { dsgIfDCD 3 }
dsgIfChannelListEntry OBJECT-TYPE
SYNTAX DsgIfChannelListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Channel List Table. Rows are
created by an SNMP SET request setting the value of
dsgIfChannelRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the value
of dsgIfChannelRowStatus to 'destroy'."
INDEX { dsgIfChannelListIndex, dsgIfChannelIndex }
::= { dsgIfChannelListTable 1 }
DsgIfChannelListEntry ::= SEQUENCE {
dsgIfChannelListIndex Unsigned32,
dsgIfChannelIndex Unsigned32,
dsgIfChannelDsFreq Integer32,
dsgIfChannelRowStatus RowStatus
}
dsgIfChannelListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to this table."
::= { dsgIfChannelListEntry 1 }
dsgIfChannelIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for each downstream frequency that
contains the DSG tunnel(s)."
::= { dsgIfChannelListEntry 2 }
dsgIfChannelDsFreq OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
UNITS "hertz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DOCSIS downstream center frequency. The receive
frequency MUST be a multiple of 62500Hz."
DEFVAL { 0 }
::= { dsgIfChannelListEntry 3 }
dsgIfChannelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { dsgIfChannelListEntry 4 }
-----------------------------------------------------------------------
--The Timer Table contains 4 timeout timers that are sent to the DSG
--clients via the DCD message. These timers are sent to the DSG clients
--via the DCD message.
--Each downstream mapped to only one set of timers.
-----------------------------------------------------------------------
dsgIfTimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsgIfTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSG Timer Table contains timers that are sent to
the DSG client(s) via the DCD message."
::= { dsgIfDCD 4 }
dsgIfTimerEntry OBJECT-TYPE
SYNTAX DsgIfTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DSG Timer Table. Rows are created
by an SNMP SET request setting the value of
dsgIfTimerRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the value
of dsgIfTimerRowStatus to 'destroy'."
INDEX { dsgIfTimerIndex }
::= { dsgIfTimerTable 1 }
DsgIfTimerEntry ::= SEQUENCE {
dsgIfTimerIndex Unsigned32,
dsgIfTimerTdsg1 Unsigned32,
dsgIfTimerTdsg2 Unsigned32,
dsgIfTimerTdsg3 Unsigned32,
dsgIfTimerTdsg4 Unsigned32,
dsgIfTimerRowStatus RowStatus
}
dsgIfTimerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to this table."
::= { dsgIfTimerEntry 1 }
dsgIfTimerTdsg1 OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Initialization Timeout. This is the timeout period
for the DSG packets during initialization of the DSG
client. The default value is 2 seconds."
DEFVAL { 2 }
::= { dsgIfTimerEntry 2 }
dsgIfTimerTdsg2 OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operational Timeout. This is the timeout period for
the DSG packets during normal operation of the DSG client.
Default value is 10 minutes."
DEFVAL { 600 }
::= { dsgIfTimerEntry 3 }
dsgIfTimerTdsg3 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Two-way retry timer. This is the retry timer that
determines when the DSG client attempts to reconnect
with the DSG Agent and established two-way connectivity.
Default value is 5 minutes. The value 0 indicates that
the client will continuously retry two-way operation."
DEFVAL { 300 }
::= { dsgIfTimerEntry 4 }
dsgIfTimerTdsg4 OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"One-way retry timer. The retry timer that determines
when the client attempts to rescan for a DOCSIS
downstream channel that contains DSG packets after a
dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout.
Default value is 30 minutes. The value 0 indicates that
the client will immediately begin scanning upon
dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout."
DEFVAL { 1800 }
::= { dsgIfTimerEntry 5 }
dsgIfTimerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { dsgIfTimerEntry 6 }
--
-- Conformance definitions
--
dsgIfConformance OBJECT IDENTIFIER ::= { dsgIfMIB 4 }
dsgIfGroups OBJECT IDENTIFIER ::= { dsgIfConformance 1 }
dsgIfCompliances OBJECT IDENTIFIER ::= { dsgIfConformance 2 }
dsgIfBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for DOCSIS Set-top Gateway
systems."
MODULE -- dsgIfMIB
-- conditionally mandatory groups
GROUP dsgIfClassifierGroup
DESCRIPTION
"Mandatory in DOCSIS Set-top Gateway systems."
GROUP dsgIfBaseGroup
DESCRIPTION
"Mandatory in DOCSIS Set-top Gateway systems."
GROUP dsgIfDCDGroup
DESCRIPTION
"Mandatory in DOCSIS Set-top Gateway systems."
::= { dsgIfCompliances 1 }
dsgIfClassifierGroup OBJECT-GROUP
OBJECTS {
dsgIfClassPriority,
dsgIfClassSrcIpAddrType,
dsgIfClassSrcIpAddr,
dsgIfClassSrcIpPrefixLength,
dsgIfClassDestIpAddressType,
dsgIfClassDestIpAddress,
dsgIfClassDestPortStart,
dsgIfClassDestPortEnd,
dsgIfClassRowStatus,
dsgIfClassIncludeInDCD
}
STATUS current
DESCRIPTION
"A collection of objects providing the classifier
configuration."
::= { dsgIfGroups 1 }
dsgIfBaseGroup OBJECT-GROUP
OBJECTS {
dsgIfTunnelGroupIndex,
dsgIfTunnelClientIdListIndex,
dsgIfTunnelMacAddress,
dsgIfTunnelServiceClassName,
dsgIfTunnelRowStatus,
dsgIfTunnelGrpDsIfIndex,
dsgIfTunnelGrpRulePriority,
dsgIfTunnelGrpUcidList,
dsgIfTunnelGrpVendorParamId,
dsgIfTunnelGrpRowStatus,
dsgIfDownTimerIndex,
dsgIfDownVendorParamId,
dsgIfDownChannelListIndex,
dsgIfDownEnableDCD
}
STATUS current
DESCRIPTION
"A collection of objects providing DSG Tunnel and Channel
configuration."
::= { dsgIfGroups 2 }
dsgIfDCDGroup OBJECT-GROUP
OBJECTS {
dsgIfClientIdType,
dsgIfClientIdValue,
dsgIfClientVendorParamId,
dsgIfClientRowStatus,
dsgIfVendorOUI,
dsgIfVendorValue,
dsgIfVendorRowStatus,
dsgIfChannelDsFreq,
dsgIfChannelRowStatus,
dsgIfTimerTdsg1,
dsgIfTimerTdsg2,
dsgIfTimerTdsg3,
dsgIfTimerTdsg4,
dsgIfTimerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing Timers configuration."
::= { dsgIfGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink