MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-SRM-BERT-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

793 lines
30 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- BERT MIB: Bit Error Rate Testing MIB for MGX82xx series products.
--
-- August 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-SRM-BERT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32 FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
DisplayString FROM SNMPv2-TC
axisDiagnostics FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanSrmBertMIB MODULE-IDENTITY
LAST-UPDATED "200208260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB Module for BERT(Bit Error Rate Testing)
using Service Resource Module(SRM). This MIB module
is used for BERT on FRSM, AUSM, CESM, VISM modules.
This module contains information on results from
BERT tests using DDS(Digital Data Service) pattern."
REVISION "200208260000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 31 }
bert OBJECT IDENTIFIER ::= { axisDiagnostics 1 }
bertControl OBJECT-TYPE
SYNTAX INTEGER {
acquireBert (1),
releaseBert (2),
cnfBert (3),
startBert (4),
modBert (5),
delBert (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls all the SET operations on this MIB group.
acquireBert : Acquire BERT resources.
cnfBert : Configure the required BERT test.
startBert : The configured test has to be started.
modBert : Modify parameters for the ongoing BERT test.
delBert : Running BERT test has to be stopped.
The above list shows the sequence in which the SET operations
on this group need to be done, ideally.
Bert can be operated upon only with bertUserId and bertSlotNumber.
The default value is 0, means no action."
::= { bert 1 }
bertResourceStatus OBJECT-TYPE
SYNTAX INTEGER {
free (1),
inUse (2),
cleanupPending (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All of bert resources can be used by only one user at a time.
This gives the status of the resources."
DEFVAL { free }
::= { bert 2 }
bertOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This refers to the user who owns the BERT resources.
If the user is a CLI user, then this is username.
If it is SNMP Manager(For example Cisco Wan Manager),
then this would be the IP address.
For example, this value can be, 192.9.209.157
within quotes."
::= { bert 3 }
bertUserId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This identifies the user who wants to do a SET operation
on this group. This will be compared against bertOwner
and access will be given only if it matches. Hence, for
every SET request, this object should have a valid value.
If the user is a CLI user, then this is username.
If it is SNMP Manager, then this would be the IP address.
For example, this value can be, 192.9.209.157 within quotes.
Required for bert operations."
::= { bert 4 }
bertStatus OBJECT-TYPE
SYNTAX INTEGER{
inactive (1),
bertInSync (2),
bertOutOfSync (3),
searchingDDSCommands (4),
farEndInLoop (5),
facilityInLoop (6),
portFacilityFifoFault (7),
portFacilityFifoOutOfSync (8),
metallicInLoop (9),
bertFailed (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable provides the status of BERT in the shelf."
DEFVAL { inactive }
::= { bert 5 }
bertSlotNumber OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the physical slot number of the Service Module
which is to run BERT
For MGX 8220, the range is 5-14.
For MGX 8850, the range is 1-6, 9-14, 17-22, 25-30.
Required for bert operations."
::= { bert 6 }
bertTestMedium OBJECT-TYPE
SYNTAX INTEGER {
port(1),
line(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies whether the bert is to test a port or an
entire T1/E1 line.
No default value for this, it has to be set if
bert is configured."
::= { bert 7 }
bertPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the port number for BERT."
::= { bert 8 }
bertLine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the line number for BERT. If the test medium
is port, this represents the line to which the
port belongs."
::= { bert 9 }
bertMode OBJECT-TYPE
SYNTAX INTEGER {
bertPatternTest (1),
ddsSeek (2),
loopback (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the mode, the BERT module is to be
configured for."
::= { bert 10 }
bertDeviceToLoop OBJECT-TYPE
SYNTAX INTEGER {
noLatchOCUwith1 (1),
noLatchOCUwitout1 (2),
noLatchCSU (3),
noLatchDSU (4),
latchDS0Drop (5),
latchDS0Line (6),
latchOCU (7),
latchCSU (8),
latchDSU (9),
latchHL96 (10),
v54Polynomial (11),
inband (12),
esf (13),
metallic (14),
noDevice (15),
smartJackInband (16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This shows the type of the end device and the type of the
loopback used (latching/nonlatching/polynomial)."
::= { bert 11 }
bertDS0DPIterationCount OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Iteration Register needs to be programmed in SRM when
DSO drop loop option is selected in bertDeviceToLoop. The
value to be programmed there is minus one of this object value,
since the register is 0 based. DSP-OP devices can be cross
connected in the centeral office. By this, the user has
capablitiy to put any of the devices in the chain in loopback
mode. This is done by repeating the latching activation
code in a specific manner. The binary number in the
iterataion register determines how many times the first portion
of a latching loop activation code needs to be repeated as per
user request and according to the Bellcore spec. A value of 0
results in no iteration and will cause the very first device in
chain to go into loop back. A value of 1 will result into one
iteration and will cause the second device to go into loopback
and so on. The range of this count is 1 to 32, and it would
translate to a range of 0 to 31 for the iteration
register."
::= { bert 12 }
bertPattern OBJECT-TYPE
SYNTAX INTEGER {
allZeros (1),
allOnes (2),
alternateONeZero (3),
doubleOneZero (4),
fifteenBit (5),
twentyBit (6),
twentyBitQRSS (7),
twentythreeBit (8),
oneInEight (9),
threeIntwentyfour (10),
dds-1 (11),
dds-2 (12),
dds-3 (13),
dds-4 (14),
dds-5 (15),
nineBit (16),
elevenBit (17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable determines BERT pattern to
be transmitted."
::= { bert 13 }
bertLoopback OBJECT-TYPE
SYNTAX INTEGER {
farEndLoopback (1),
facilityLoopback (2),
metallicLoopback (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the type of loopback to be (d)established."
::= { bert 14 }
bertLoopbackOperation OBJECT-TYPE
SYNTAX INTEGER{
loopUp (1),
loopDown (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specifies the operation of loopback (up or down)."
::= { bert 15 }
bertDS0Speed OBJECT-TYPE
SYNTAX INTEGER {
speed56k (1),
speed64k (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"represents the ds0 speed of the test running."
::= { bert 16 }
bertTimeSlots OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"represents the number of ds0s in the test medium chosen."
::= { bert 17 }
bertStartTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syntax is hh:mm:ss
The time zone is as configured in the shelf."
::= { bert 18 }
bertStartDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On MGX 8220, the syntax is mm/dd/yy
On MGX 8850, the syntax is mm/dd/yyyy."
::= { bert 19 }
bertBitCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the number of bits transmitted."
::= { bert 20 }
bertBitErrorCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the number of bits received in error."
::= { bert 21 }
bertErrorInjectCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the number of times error was injected."
::= { bert 22 }
bertCleanupAction OBJECT-TYPE
SYNTAX INTEGER {
noAction (1),
smCleanup (2),
latchDS0DropLoopdown (3),
latchDS0LineLoopdown (4),
latchOCULoopdown (5),
latchCSULoopdown (6),
latchDSULoopdown (7),
latchHL96Loopdown (8),
v54PolynomialLoopdown (9),
inbandLoopdown (10),
esfLoopdown (11),
facilityLoopdown (12),
metallicLoopdown (13),
smartJackInbandLoopdown (14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the BERT has to be stopped or aborted (due to card state
changes), this object would give the exact action to take.
The bert related changes to the shelf, then, can be cleaned up.
When its value is a Loopdown, it implies smCleanup plus the
corresponding Loopdown."
DEFVAL { noAction }
::= { bert 23 }
bertAbortReason OBJECT-TYPE
SYNTAX INTEGER {
ascStateChange (1),
smStateChange (2),
srmStateChange (3),
coreCardSwitch (4),
smRedundancySwitch (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"when the BERT is aborted, this object would give the
reason for that."
::= { bert 24 }
-- ----------------------------------------------------------------------
--
-- This table consists of the last 20 DDS codes that were detected during
-- DDS seek.
-- ----------------------------------------------------------------------
-- ----------------------------------------------------------------------
--
-- If one of the indices to the table is 0, it means that there are no
-- entries in the table. This table is a circular one and the first and
-- last indices refer to the beginning and the end of the circular list
-- respectively. If there are more than 20 codes detected, the table
-- enrties will be overwritten to keep only the last 20 codes detected.
--
-- ----------------------------------------------------------------------
bertDDSSeekResultsTableFirstIndex OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the index of the oldest entry in the table.
A value of zero means that there are no entries in
the table."
::= { bert 25 }
bertDDSSeekResultsTableLastIndex OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the index of the latest entry in the table.
A value of zero means that there are no entries in
the table."
::= { bert 26 }
bertDDSSeekResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BertDDSSeekResultsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all available DDS patterns detected
and latched by an interaface(lines,ports etc) configured
to detect DDS patterns."
::= { bert 27 }
bertDDSSeekResultsTableEntry OBJECT-TYPE
SYNTAX BertDDSSeekResultsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the detected DDS codes table."
INDEX { bertDDSSeekResultsTableIndex }
::= { bertDDSSeekResultsTable 1 }
BertDDSSeekResultsTableEntry ::=
SEQUENCE {
bertDDSSeekResultsTableIndex Integer32,
bertDDSCode INTEGER
}
bertDDSSeekResultsTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the serial number of the entry in the table."
::= { bertDDSSeekResultsTableEntry 1 }
bertDDSCode OBJECT-TYPE
SYNTAX INTEGER {
abnormalStationCondition (30), -- ('1E'h),
block (10), -- ('0A'h),
channelLoopback (40), -- ('28'h),
dsuLoopback (44), -- ('2C'h),
farEndVoice (90), -- ('5A'h),
idle (126), -- ('7E'h),
loopbackEnable (86), -- ('56'h),
mjuAlert (114), -- ('72'h),
muxOutOfSync (26), -- ('1A'h),
ocuLoopback (42), -- ('2A'h),
release (120), -- ('78'h),
test (28), -- ('1C'h),
testAlert (108), -- ('6C'h),
transitionInProgress (58), -- ('3A'h),
unassignedMuxChannel (24), -- ('18'h),
unnamed (50) -- ('32'h)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the type of DDS code detected."
::= { bertDDSSeekResultsTableEntry 2 }
-- --------------------------------------------------------------------
--
-- This table contains the list of supported tests for each SM in
-- the shelf.
--
-- --------------------------------------------------------------------
bertSupportedTestsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BertSupportedTestsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of supported tests for a given SM."
::= { bert 28 }
bertSupportedTestsTableEntry OBJECT-TYPE
SYNTAX BertSupportedTestsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A general supported tests entry."
INDEX { bertSupportedTestsTableIndex }
::= { bertSupportedTestsTable 1 }
BertSupportedTestsTableEntry ::=
SEQUENCE {
bertSupportedTestsTableIndex Integer32,
bertSupportFlag INTEGER,
bertTestMediumMask Integer32,
bertModeMask Integer32,
bertDeviceToLoopMask Integer32,
bertPatternMask Integer32,
bertLoopbackMask Integer32,
bertCardT1E1Type INTEGER
}
bertSupportedTestsTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is the physical slot number of the Service
Module whose entry it represents in the table.
For MGX 8220, the range is 5-14.
For MGX 8850, the range is 1-6, 9-14, 17-22, 25-30."
::= { bertSupportedTestsTableEntry 1 }
bertSupportFlag OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'yes' if the table entry correctly represents the supported
tests for the SM on the corresponding slot. 'no' if no tests
at all are supported."
::= { bertSupportedTestsTableEntry 2 }
bertTestMediumMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Every test medium is represented by a bit of mask. Bits 0-1 are
valid in this integer. The meaning of the mask can be
understood from the example below:
--------------------------
TestMedium | SM
| support
--------------------------
port | 1
line | 1
--------------------------
(Table contents applicable to FRSM-4T1)
bertTestMediumMask = 11 binary
The column titles represent the variables bertTestMedium
depends on. The mask is represented in column
major order."
::= { bertSupportedTestsTableEntry 3 }
bertModeMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Every mode is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
-----------------------------------------------------------
Mode | SM support | Test Medium:
| | Multiple
| | T1 time slots
-----------------------------------------------------------
Pattern test | 1 | 1
DDS seek | 1 | 0
Loopback | 1 | 1
-----------------------------------------------------------
(Table contents applicable to FRSM-4T1)
bertModeMask = 101111 binary
The column titles represent the variables bertMode depends on.
The mask is represented in column major order."
::= { bertSupportedTestsTableEntry 4 }
bertDeviceToLoopMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Every class of devices to loop is represented by 6 bits
of mask. Bits 0-29 are valid in this integer. The meaning
of the mask can be understood from the example below:
-----------------------------------------------------------
| | | Test Medium
Class of | SM | MODE |________________________________
devices |supp | Loopback|Line |multiple T1 | 64k | 56k
| | | | time slots | |
-----------------------------------------------------------
noLatch | 1 0 0 0 0 1
latch | 1 1 0 0 1 1
v54 | 1 1 0 1 1 1
inband/esf| 1 1 1 0 0 0
metallic | 1 0 1 0 0 0
-----------------------------------------------------------
(Table contents applicable to FRSM-4T1)
bertDeviceToLoopMask = 001110011000100110000111011111 binary
The column titles represent the variables bertDeviceToLoop
depends on. The mask is represented in column major order.
Due to the limitation on the length of the mask, 'noDevice'
option is not represented in this mask. But, the mask for
it, is assumed to be a row of ones except for a zero on
'MODE Loopback' column."
::= { bertSupportedTestsTableEntry 5 }
bertPatternMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Every class of patterns is represented by 2 bits of mask.
Bits 0-3 are valid in this integer. The meaning of the
mask can be understood from the example below:
----------------------------------------------
Class of | SM | Non latching
patterns | support |device to loop
----------------------------------------------
Other patterns | 1 | 0
----------------------------------------------
Patterns | 1 | 1
power 9 and 11 | |
----------------------------------------------
(Table contents applicable to FRSM-4T1)
bertPatternMask = 1011 binary
The column titles represent the variables bertPattern
depends on. The mask is represented in column
major order."
::= { bertSupportedTestsTableEntry 6 }
bertLoopbackMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Every loopback is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
----------------------------------------------
Loopback | SM | Test Medium
| support | Port
----------------------------------------------
Far End Loopback | 1 | 1
Facility Loopback | 1 | 1
Metallic Loopback | 1 | 0
----------------------------------------------
(Table contents applicable to FRSM-4T1)
bertLoopbackMask = 011111 binary
The column titles represent the variables bertLoopback
depends on. The mask is represented in column
major order."
::= { bertSupportedTestsTableEntry 7 }
bertCardT1E1Type OBJECT-TYPE
SYNTAX INTEGER {
t1(1),
e1(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether a t1 or e1 card."
::= { bertSupportedTestsTableEntry 8 }
-- conformance information
ciscoWanSrmBertMIBConformance OBJECT IDENTIFIER ::= { ciscoWanSrmBertMIB 2 }
ciscoWanSrmBertMIBGroups OBJECT IDENTIFIER ::=
{ ciscoWanSrmBertMIBConformance 1 }
ciscoWanSrmBertMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoWanSrmBertMIBConformance 2 }
-- compliance statements
ciscoWanSrmBertCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for objects related
to Bert MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanSrmBertConfGroup
}
::= { ciscoWanSrmBertMIBCompliances 1 }
ciscoWanSrmBertConfGroup OBJECT-GROUP
OBJECTS {
bertControl,
bertResourceStatus,
bertOwner,
bertUserId,
bertStatus,
bertSlotNumber,
bertTestMedium,
bertPort,
bertLine,
bertMode,
bertDeviceToLoop,
bertDS0DPIterationCount,
bertPattern,
bertLoopback,
bertLoopbackOperation,
bertDS0Speed,
bertTimeSlots,
bertStartTime,
bertStartDate,
bertBitCount,
bertBitErrorCount,
bertErrorInjectCount,
bertCleanupAction,
bertAbortReason
}
STATUS current
DESCRIPTION
"The collection of objects which are used for
configuring/running BERT on Service modules
using SRM module."
::= { ciscoWanSrmBertMIBGroups 1 }
ciscoWanSrmBertTestResultsGroup OBJECT-GROUP
OBJECTS {
bertSupportedTestsTableIndex,
bertSupportFlag,
bertTestMediumMask,
bertModeMask,
bertDeviceToLoopMask,
bertPatternMask,
bertLoopbackMask,
bertCardT1E1Type
}
STATUS current
DESCRIPTION
"The collection of objects which are used for
finding the results of running BERT tests."
::= { ciscoWanSrmBertMIBGroups 2 }
ciscoWanSrmBertDDSResultsGroup OBJECT-GROUP
OBJECTS {
bertDDSSeekResultsTableFirstIndex,
bertDDSSeekResultsTableLastIndex,
bertDDSSeekResultsTableIndex,
bertDDSCode
}
STATUS current
DESCRIPTION
"The collection of objects which are used for
finding the results of running BERT tests using
DDS pattern."
::= { ciscoWanSrmBertMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink