mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
550 lines
17 KiB
Plaintext
550 lines
17 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-VISM-SVC-MIB
|
|
-- The MIB is for SVC(Switched Virtual Circuit) information for
|
|
-- VISM(Voice Interworking Service Module).
|
|
--
|
|
-- October 2003, George Ogagan
|
|
--
|
|
-- Copyright (c) 2003 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- ****************************************************************
|
|
|
|
CISCO-VISM-SVC-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
voice FROM BASIS-MIB
|
|
ciscoWan FROM CISCOWAN-SMI;
|
|
|
|
ciscoVismSvcMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200310090000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-wanatm@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module containing SVC information for
|
|
VISM service module."
|
|
|
|
REVISION "200310090000Z"
|
|
DESCRIPTION
|
|
"Initial version of the MIB.
|
|
|
|
The content of this MIB was originally available
|
|
in SMIv1 version. The MIB has been converted to
|
|
SMIv2 version and descriptions of some of the objects
|
|
have been modified."
|
|
::= { ciscoWan 90 }
|
|
|
|
vismSvcGrp OBJECT IDENTIFIER ::= { voice 10 }
|
|
|
|
vismSvcCnfGroups OBJECT IDENTIFIER ::= { voice 19 }
|
|
|
|
-- voice SVC signalling QoS parameters
|
|
vismSvcAtmQosGrp OBJECT IDENTIFIER ::= { vismSvcCnfGroups 1 }
|
|
|
|
-- scaling factor to SVC signalling traffic parameters
|
|
vismSvcTrfScalingGrp OBJECT IDENTIFIER ::= { vismSvcCnfGroups 2 }
|
|
|
|
-- default AAL2 CID used for single CID AAL2 SVCs
|
|
vismSvcAal2CidGrp OBJECT IDENTIFIER ::= { vismSvcCnfGroups 3 }
|
|
|
|
vismSvcTxSetups OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Setup messages sent
|
|
to the PXM(Processor Switch Module) from
|
|
the VISM since VISM reset."
|
|
::= { vismSvcGrp 1 }
|
|
|
|
vismSvcRxSetups OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Setup messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 2 }
|
|
|
|
vismSvcTxCallProcs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Call proceeding messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 3 }
|
|
|
|
vismSvcRxCallProcs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Call proceeding messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 4 }
|
|
|
|
vismSvcTxConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Connect messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 5 }
|
|
|
|
vismSvcTxConnAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Connect ack messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 6 }
|
|
|
|
vismSvcRxConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Connect messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 7 }
|
|
|
|
vismSvcRxConnAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Connect ack messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 8 }
|
|
|
|
vismSvcTxReleases OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Release messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 9 }
|
|
|
|
vismSvcTxReleaseCompls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Release complete messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 10 }
|
|
|
|
vismSvcRxReleases OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Release messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 11 }
|
|
|
|
vismSvcRxReleaseCompls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Release complete messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 12 }
|
|
|
|
vismSvcTxRestarts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Restart messages sent to the PXM
|
|
from the VISM since VISM reset."
|
|
::= { vismSvcGrp 13 }
|
|
|
|
vismSvcTxRestartAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Restart ack messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 14 }
|
|
|
|
vismSvcRxRestarts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Restart messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 15 }
|
|
|
|
vismSvcRxRestartAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Restart ack messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 16 }
|
|
|
|
vismSvcTxResyncStrts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync start messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 17 }
|
|
|
|
vismSvcTxResyncStrtAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync start ack messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 18 }
|
|
|
|
vismSvcRxResyncStrts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync start messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 19 }
|
|
|
|
vismSvcRxResyncStrtAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync start ack messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 20 }
|
|
|
|
vismSvcTxResyncEnds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync end messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 21 }
|
|
|
|
vismSvcTxResyncEndAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync end ack messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 22 }
|
|
|
|
vismSvcRxResyncEnds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync end messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 23 }
|
|
|
|
vismSvcRxResyncEndAcks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Resync end ack messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 24 }
|
|
|
|
vismSvcTxBulkResyncs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Bulk resync messages sent
|
|
to the PXM from the VISM since VISM reset."
|
|
::= { vismSvcGrp 25 }
|
|
|
|
vismSvcRxBulkResyncs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of Bulk resync messages received
|
|
by the VISM from the PXM since VISM reset."
|
|
::= { vismSvcGrp 26 }
|
|
|
|
vismSvcCallProcExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times
|
|
the call proceeding timer expired
|
|
before a connect message is received."
|
|
::= { vismSvcGrp 27 }
|
|
|
|
vismSvcReleasExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times
|
|
the release timer expired before a release
|
|
complete message is received."
|
|
::= { vismSvcGrp 28 }
|
|
|
|
vismSvcConnExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times
|
|
the connect timer expired before a
|
|
connection message is received."
|
|
::= { vismSvcGrp 29 }
|
|
|
|
vismSvcConnAckExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of times the
|
|
connect ack timer expires before a connect
|
|
ack message is received."
|
|
::= { vismSvcGrp 30 }
|
|
|
|
vismSvcRestartExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate the number of times the
|
|
restart timer expires before a Restart Response
|
|
message is received."
|
|
::= { vismSvcGrp 31 }
|
|
|
|
vismSvcResyncExpiries OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate the number of times the
|
|
Resync timer expired a Resync End Indication
|
|
message is received."
|
|
::= { vismSvcGrp 32 }
|
|
|
|
vismSvcAtmQosCdv OBJECT-TYPE
|
|
SYNTAX Integer32 (500..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End-to-end cell delay variation used in voice SVC
|
|
establishment. It is used to guarantee the quality
|
|
of the route selected for a voice SVC. It is applicable
|
|
to both AAL1 and AAL2 SVC connection establishment. The
|
|
value specified to this object is in 'micro-seconds'. This
|
|
value is sent in voice SVC setup messages in extended
|
|
quality of services information element as the objective value.
|
|
"
|
|
REFERENCE
|
|
"The references are from ATM Forum 'Voice & Telephony over ATM'
|
|
specifications af-vtoa-0089.000, af-vtoa-0113.000.
|
|
"
|
|
DEFVAL { 20000 }
|
|
::= { vismSvcAtmQosGrp 1 }
|
|
|
|
vismSvcAtmQosCtd OBJECT-TYPE
|
|
SYNTAX Integer32 (20000..150000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"End-to-end maximum cell transfer delay used in voice
|
|
SVC establishment. It is used to guarantee the quality
|
|
of the route selected for a voice SVC. It is applicable
|
|
to both AAL1 and AAL2 SVC connection establishment.
|
|
The value specified to this object is in 'micro-seconds'.
|
|
This value is sent in voice SVC setup messages in end-to-end
|
|
transit delay information element as the objective value.
|
|
"
|
|
REFERENCE
|
|
"The references are from ITU G-Series Recommendations:
|
|
G.114 - One-way transmission time.
|
|
"
|
|
DEFVAL { 150000 }
|
|
::= { vismSvcAtmQosGrp 2 }
|
|
|
|
vismSvcAtmQosClr OBJECT-TYPE
|
|
SYNTAX Integer32 (4..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum Cell Loss Ratio used in voice SVC establishment.
|
|
It is used to guarantee the quality of the route selected for
|
|
a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection
|
|
establishment. This value is sent in voice SVC setup messages in
|
|
extended quality of services information element as maximum cell
|
|
loss ratio value.
|
|
"
|
|
REFERENCE
|
|
" The references are from BellCore specifications - GR.1110
|
|
"
|
|
DEFVAL { 8 }
|
|
::= { vismSvcAtmQosGrp 3 }
|
|
|
|
|
|
vismSvcTrfScalingFactor OBJECT-TYPE
|
|
SYNTAX Integer32 (50..200)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic scaling Factor used to compute factored bandwidth which is
|
|
used in ATM signaling to establish voice SVC. When this value is
|
|
less than 100 it can be referred as a `discount factor' and when
|
|
more than 100 referred as an `excess factor'
|
|
It is applicable only to VBR SVC connection establishment.
|
|
The traffic scaling is not applicable to AAL2 SVC calls that
|
|
require G.711 and clear channel codecs
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { vismSvcTrfScalingGrp 1 }
|
|
|
|
vismSvcAal2CidNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (8..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default AAL2 Channel IDentification (CID) number
|
|
used for AAL2 SVC connections.
|
|
"
|
|
REFERENCE
|
|
"The references are from ITU I-Series Recommendations:
|
|
I.363.2 B-ISDN ATM Adaptation Layer specification: Type 2 AAL.
|
|
"
|
|
DEFVAL { 100 }
|
|
::= { vismSvcAal2CidGrp 1 }
|
|
|
|
-- conformance information
|
|
|
|
ciscoVismSvcMIBConformance OBJECT IDENTIFIER ::= { ciscoVismSvcMIB 2 }
|
|
|
|
ciscoVismSvcMIBGroups OBJECT IDENTIFIER ::=
|
|
{ ciscoVismSvcMIBConformance 1 }
|
|
|
|
ciscoVismSvcMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ ciscoVismSvcMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ciscoVismSvcCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for objects related
|
|
to VISM SVC module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoVismSvcCounterGroup,
|
|
ciscoVismSvcAtmQosGroup,
|
|
ciscoVismSvcTrfScalingGrp,
|
|
ciscoVismSvcAal2CidGrp
|
|
}
|
|
::= { ciscoVismSvcMIBCompliances 1 }
|
|
|
|
ciscoVismSvcCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vismSvcTxSetups,
|
|
vismSvcRxSetups,
|
|
vismSvcTxCallProcs,
|
|
vismSvcRxCallProcs,
|
|
vismSvcTxConns,
|
|
vismSvcTxConnAcks,
|
|
vismSvcRxConns,
|
|
vismSvcRxConnAcks,
|
|
vismSvcTxReleases,
|
|
vismSvcTxReleaseCompls,
|
|
vismSvcRxReleases,
|
|
vismSvcRxReleaseCompls,
|
|
vismSvcTxRestarts,
|
|
vismSvcTxRestartAcks,
|
|
vismSvcRxRestarts,
|
|
vismSvcRxRestartAcks,
|
|
vismSvcTxResyncStrts,
|
|
vismSvcTxResyncStrtAcks,
|
|
vismSvcRxResyncStrts,
|
|
vismSvcRxResyncStrtAcks,
|
|
vismSvcTxResyncEnds,
|
|
vismSvcTxResyncEndAcks,
|
|
vismSvcRxResyncEnds,
|
|
vismSvcRxResyncEndAcks,
|
|
vismSvcTxBulkResyncs,
|
|
vismSvcRxBulkResyncs,
|
|
vismSvcCallProcExpiries,
|
|
vismSvcReleasExpiries,
|
|
vismSvcConnExpiries,
|
|
vismSvcConnAckExpiries,
|
|
vismSvcRestartExpiries,
|
|
vismSvcResyncExpiries
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
VISM SVC counters."
|
|
::= { ciscoVismSvcMIBGroups 1 }
|
|
|
|
ciscoVismSvcAtmQosGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vismSvcAtmQosCdv,
|
|
vismSvcAtmQosCtd,
|
|
vismSvcAtmQosClr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
VISM SVC Signaling and QOS parameters."
|
|
::= { ciscoVismSvcMIBGroups 2 }
|
|
|
|
ciscoVismSvcTrfScalingGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
vismSvcTrfScalingFactor
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is are used to represent VISM
|
|
scaling factor to SVC Signaling traffic parameter."
|
|
::= { ciscoVismSvcMIBGroups 3 }
|
|
|
|
ciscoVismSvcAal2CidGrp OBJECT-GROUP
|
|
OBJECTS {
|
|
vismSvcAal2CidNumber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to represent
|
|
VISM SVC AAL2 Cid."
|
|
::= { ciscoVismSvcMIBGroups 4 }
|
|
|
|
END
|