MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-VISM-SESSION-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1085 lines
37 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-VISM-SESSION-MIB.my
-- This MIB is used for maintaining and configuration
-- of the RUDP(Reliable UDP) session on VISM(Voice
-- Interworking Service Module).
--
-- February 2004, George Ogagan
--
-- Copyright (c) 2003, 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-VISM-SESSION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
IpAddress
FROM SNMPv2-SMI
TruthValue,
DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
voice FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoVismSessionMIB MODULE-IDENTITY
LAST-UPDATED "200402260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module contain the RUDP session parameter.
The relationship between session set, session group and RUDP
session is that: For fault tolerant case each session set
contains two groups. Each group connects to one MGC(Media
Gateway Controller), One active, one standby. If one MGC
fails, the other MGC will inform the session mamager to
switch over. If the set configuration is non-fault tolerant,
each set contains one group.
Each session group contains upto four RUDP sessions.
Session set is explicitly created first, then session group
can be created in this set. After session group is
created, session can be created in the group.
For deletion, session has to be deleted first. However, the
last session can not be deleted if there is still LAPD(Link
Access Procedure on the D-channel) entry. A group can only
be deleted if there is no more session in it. Session set
will be deleted when the last group in the set has been
deleted.
"
REVISION "200402260000Z"
DESCRIPTION
"Update descriptions in the MIB.
"
REVISION "200307170000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in SMIv1 version. The MIB has been converted to
SMIv2 version and descriptions of some of the objects
have been modified.
"
::= { ciscoWan 95 }
vismSessionGrp OBJECT IDENTIFIER ::= { voice 11 }
--
-- --------------------------------
-- vismSessionSet table
-- --------------------------------
--
vismSessionSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismSessionSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vismSessionSetTable has entries for a collection
of session group. Each entry provides connectivity
to a different MGC.
"
::= { vismSessionGrp 1 }
vismSessionSetEntry OBJECT-TYPE
SYNTAX VismSessionSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismSessionSetTable."
INDEX { vismSessionSetNum }
::= { vismSessionSetTable 1 }
VismSessionSetEntry ::=
SEQUENCE {
vismSessionSetNum Integer32,
vismSessionSetRowStatus INTEGER,
vismSessionSetState INTEGER,
vismSessionSetTotalGrps Integer32,
vismSessionSetActiveGrp Integer32,
vismSessionSetSwitchFails Counter32,
vismSessionSetSwitchSuccesses Counter32,
vismSessionSetFaultTolerant TruthValue
}
vismSessionSetNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index that uniquely identifies a session set.
"
::= { vismSessionSetEntry 1 }
vismSessionSetRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
createAndGo(4),
destroy (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to allow add or delete a session set.
'active': This state indicates that the session set is
available for use by the managed device;
'createAndGo': Use this to add an entry in this table.
`destroy': the status supplied by a management station
wishing to delete all of the instances associated with
this session group. Deletion of a set is not allowed if
there is still group in this set.
"
::= { vismSessionSetEntry 2 }
vismSessionSetState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
oos (2),
activeIs (3),
standbyIs (4),
fullIs (5),
unknown (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When an entry in vismSessionSetTable is created and no group
has been added to this set yet or group has been created
in this set but no session has been added yet the set state
is 'idle'.
After a group has been created in this set and one session
has been added to the group the set state becomes 'oos',i.e,
out of service.
After successfully open socket and the session has sent
START message to MGC, the state of the set will be changed
based on whether this set is fault tolerant(FT) or none fault
tolerant(NFT) specify in vismSessionSetFaultTolerant.
In NFT case the set state becomes 'activeIs'.
In FT case, if one session from a group received an active
message from MGC and no standby message received from a
session in the other group, the state of the set will change
to 'activeIs'.
On the other hand, if at least one session from a group
received standby message from MGC and no other
session from the other group received active message then
the set state is transferred to 'standbyIs'.
The set becomes 'fullIs' when at least one session from
one group receives active message and at least one session
from the other group receives standby message.
'unknown' is a state other than the above states.
"
::= { vismSessionSetEntry 3 }
vismSessionSetTotalGrps OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of session groups in the session set.
"
::= { vismSessionSetEntry 4 }
vismSessionSetActiveGrp OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the current group number in active state."
::= { vismSessionSetEntry 5 }
vismSessionSetSwitchFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of failed attempts to 'switch'
between session groups in this session set.
"
::= { vismSessionSetEntry 6 }
vismSessionSetSwitchSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of successful attempts to
'switch' between session groups in this session set.
"
::= { vismSessionSetEntry 7 }
vismSessionSetFaultTolerant OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the set configuration
is fault tolerant, 'true(1)' indicate fault tolerant
and 'false(2)' non fault tolerant. If the set is
fault tolerant then there can be two groups in this set.
If the set is non fault tolerant then only one group
can be added in this set.
Once the entry is created this object cannot be modified.
"
::= { vismSessionSetEntry 8 }
-- --------------------
-- vismSessionGrp table
-- --------------------
vismSessionGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismSessionGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries for a collection of sessions.
"
::= { vismSessionGrp 2 }
vismSessionGrpEntry OBJECT-TYPE
SYNTAX VismSessionGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismSessionGrpTable."
INDEX { vismSessionGrpNum }
::= { vismSessionGrpTable 1 }
VismSessionGrpEntry ::=
SEQUENCE {
vismSessionGrpNum Integer32,
vismSessionGrpSetNum Integer32,
vismSessionGrpRowStatus INTEGER,
vismSessionGrpState INTEGER,
vismSessionGrpCurrSession Integer32,
vismSessionGrpTotalSessions Integer32,
vismSessionGrpSwitchFails Counter32,
vismSessionGrpSwitchSuccesses Counter32,
vismSessionGrpMgcName DisplayString
}
vismSessionGrpNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index that uniquely identifies a session group.
"
::= { vismSessionGrpEntry 1 }
vismSessionGrpSetNum OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identify session set number to which
this session Group belongs. Once the entry is created
this object cannot be modified.
The same session set can only be assigned to two
different session groups.
"
::= { vismSessionGrpEntry 2 }
vismSessionGrpRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows to add or delete an entry in this table.
'createAndGo': Use this to add an entry in this table.
vismSessionGrpSetNum and vismSessionGrpMgcName are required
to add an entry. Before adding the session group, The
session set should already be created.
'active': This state indicates that the session group is
available for use by the managed device;
`destroy': the status supplied by a management station
wishing to delete all of the instances associated with
this session group.
"
::= { vismSessionGrpEntry 3 }
vismSessionGrpState OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
oos (2),
is (3),
unknown (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational state of the session
group. The possible operational states are as follows:
'idle': This is the initial state.
'oos' : Out of service state. when a session group has been
created the state of the session group becomes 'oos'
or when all sessions belonging to this group are
deleted, session group state becomes 'oos'
'is': In service state. After at least one session has been
added to the group, socket has been successfully set up
and the session has sent a START message to MGC the
group state changes to 'is'.
'unknown': This is the state other than the above states.
"
::= { vismSessionGrpEntry 4 }
vismSessionGrpCurrSession OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current session that is open to
communication with MGC. There is only one active
session per session group.
"
::= { vismSessionGrpEntry 5 }
vismSessionGrpTotalSessions OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of sessions that are configured
in the session group.
"
::= { vismSessionGrpEntry 6 }
vismSessionGrpSwitchFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of failed attempts to 'switch'
between sessions in this group.
"
::= { vismSessionGrpEntry 7 }
vismSessionGrpSwitchSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of successful attempts to
'switch' between sessions in this group.
"
::= { vismSessionGrpEntry 8 }
vismSessionGrpMgcName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This denotes the name of the MGC. This corresponds to
a domain name under which the MGC could also be
registered in a DNS(Domain Named System). Once this
entry becomes active, this value may not be modified.
"
::= { vismSessionGrpEntry 9 }
-- ----------------------------------------------------------------------
-- vismRudpSessionCnfTable
-- ----------------------------------------------------------------------
vismRudpSessionCnfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismRudpSessionCnfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has entries of sessions, which are the connection
between MGC and a gateway. A session is identified by
a local IP address, port, remote IP address and remote port.
The combination of these four numbers has to be unique to
identify one session. This table also maintains the
configuration for every session.
"
::= { vismSessionGrp 3 }
vismRudpSessionCnfEntry OBJECT-TYPE
SYNTAX VismRudpSessionCnfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismSessionCnfEntry."
INDEX { vismRudpSessionNum }
::= { vismRudpSessionCnfTable 1 }
VismRudpSessionCnfEntry ::=
SEQUENCE {
vismRudpSessionNum Integer32,
vismRudpSessionGrpNum Integer32,
vismRudpSessionCnfRowStatus INTEGER,
vismRudpSessionPriority Integer32,
vismRudpSessionState INTEGER,
vismRudpSessionCurrSession Integer32,
vismRudpSessionLocalIp IpAddress,
vismRudpSessionLocalPort Integer32,
vismRudpSessionRmtIp IpAddress,
vismRudpSessionRmtPort Integer32,
vismRudpSessionMaxWindow Integer32,
vismRudpSessionSyncAttempts Integer32,
vismRudpSessionMaxSegSize Integer32,
vismRudpSessionMaxAutoReset Integer32,
vismRudpSessionRetransTmout Integer32,
vismRudpSessionMaxRetrans Integer32,
vismRudpSessionMaxCumAck Integer32,
vismRudpSessionCumAckTmout Integer32,
vismRudpSessionMaxOutOfSeq Integer32,
vismRudpSessionNullSegTmout Integer32,
vismRudpSessionTransStateTmout Integer32,
vismRudpSessionType INTEGER,
vismRudpSessionRmtGwIp IpAddress
}
vismRudpSessionNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index that uniquely identifies a session.
"
::= { vismRudpSessionCnfEntry 1 }
vismRudpSessionGrpNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the session group that this session belongs to.
Once the entry is created, it cannot be modified.
"
::= { vismRudpSessionCnfEntry 2 }
vismRudpSessionCnfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
createAndGo (4),
destroy (6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable allows the user to add or delete the entry
for this table.
'createAndGo': Use this to add a RUDP session in this
table. RUDP vismRudpSessionNum, vismRudpSessionGrpNum,
vismRudpSessionPriority, vismRudpSessionLocalPort
and vismRudpSessionRmtPort are required while creating
an entry for PRI(Primary Rate Interface) Backhaul. On
the other hand RUDP vismRudpSessionNum,
vismRudpSessionLocalPort, vismRudpSessionRmtPort,
remote IP and RUDP session type are required
for LAPD Trunking.
'active': This state indicates that the session is
available for use by the managed device;
'destroy': Use this to delete an RUDP session from
this table. Only RUDP session number is needed for
deleting. The last session shall not be deleted if
there are still active LAPD entries.
"
::= { vismRudpSessionCnfEntry 3 }
vismRudpSessionPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the RUDP session priority for
this session.
Once a session has been added it can not be modified.
When a session fails it indicates which session the session
manager should try to bring active.
A lower number means higher priority.
"
::= { vismRudpSessionCnfEntry 4 }
vismRudpSessionState OBJECT-TYPE
SYNTAX INTEGER {
oos (1),
is (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current session operational
state. The possible operational states are as follows:
'oos': Out of service state. This is the initial state when
a RUDP session is created.
'is' : In service state. When a channel has been created
between gateway and MGC and gateway has sent
Start message the state of the session changes to
'is'. If the communication is lost between GW
(gateway) and the MGC, the state of this session
becomes 'oos'.
'unknown': This is the state other than the above states.
"
::= { vismRudpSessionCnfEntry 5 }
vismRudpSessionCurrSession OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which session has got active message
from MGC. The session manager will always try to bring
the first added session to active.
If the current active session fails the state of this
session is changed to 'oos' through
vismRudpSessionState and the session manager will
try to bring the 'primary-is' session with highest
priority identify by the object vismRudpSessionPriority
among the rest of sessions in this group to active.
"
::= { vismRudpSessionCnfEntry 6 }
vismRudpSessionLocalIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of XGCP gateway."
::= { vismRudpSessionCnfEntry 7 }
vismRudpSessionLocalPort OBJECT-TYPE
SYNTAX Integer32 (1124..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of XGCP gateway for this session.
It can be modified after creation. This port number should
be unique across other sessions and XGCP/SRCP(Simple
Resource Coordination Protocol).
"
::= { vismRudpSessionCnfEntry 8 }
vismRudpSessionRmtIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the IP address of the MGC. It is resolved by
using vismSessionGrpMgcName in vismSessionGrpTable.
"
::= { vismRudpSessionCnfEntry 9 }
vismRudpSessionRmtPort OBJECT-TYPE
SYNTAX Integer32 (1124..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of MGC for this session. It can be
modified after creation. This port number should
be unique across other sessions and XGCP/SRCP.
"
::= { vismRudpSessionCnfEntry 10 }
vismRudpSessionMaxWindow OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the maximum number of segments that should be
sent without getting an acknowledgment, i.e. the maximum
size of the receive window in segments. This is used for
flow control.
"
DEFVAL { 32 }
::= { vismRudpSessionCnfEntry 11 }
vismRudpSessionSyncAttempts OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of attempts to synchronize with other side
(MGC). This object can be modified after a session is
created.
"
DEFVAL { 5 }
::= { vismRudpSessionCnfEntry 12 }
vismRudpSessionMaxSegSize OBJECT-TYPE
SYNTAX Integer32 (30..65535)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of octets that can be received by the peer
sending the SYN segment.
"
DEFVAL { 384 }
::= { vismRudpSessionCnfEntry 13 }
vismRudpSessionMaxAutoReset OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of consecutive auto reset that will be
performed before a connection is reset. A value 0 indicates
that an auto reset will not be attempted, the connection
will be reset immediately if an auto reset condition occurs.
"
DEFVAL { 5 }
::= { vismRudpSessionCnfEntry 14 }
vismRudpSessionRetransTmout OBJECT-TYPE
SYNTAX Integer32 (100..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout value for retransmission of unacknowledged
packets. This is a negotiable parameter, MGC and GW
must agree on the same value for this parameter.
"
DEFVAL { 600 }
::= { vismRudpSessionCnfEntry 15 }
vismRudpSessionMaxRetrans OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of times consecutive retransmission
will be attempted before the connection is considered
broken. A value 0 indicates retransmission should be
attempted forever. This is a negotiable parameter, both
MGC and GW must agree on the value for this parameter.
"
DEFVAL { 3 }
::= { vismRudpSessionCnfEntry 16 }
vismRudpSessionMaxCumAck OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of acknowledgments
that will be accumulated before sending an acknowledgment.
A value of 0 indicates an acknowledgment segment will be
sent immediately when a data, null, or reset segment is
received. This is a negotiable parameter between MGC
GW and .
"
DEFVAL { 3 }
::= { vismRudpSessionCnfEntry 17 }
vismRudpSessionCumAckTmout OBJECT-TYPE
SYNTAX Integer32 (100..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the timeout value for sending an
acknowledgment segment. This value is specified in
milliseconds. This parameter should be smaller than
vismRudpSessionRetransTmout. This is a negotiable
parameter betwen MGC and GW.
"
DEFVAL { 300 }
::= { vismRudpSessionCnfEntry 18 }
vismRudpSessionMaxOutOfSeq OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the maximum number of out of sequence packets
that will be accumulated before an EACK(Extended
acknowledgement) segment is sent. The EACK segment is
used to acknowledge segments received out of sequence.
A value of 0 indicates a EACK will be sent immediately if
an out of order segment is received. This is a negotiable
parameter between MGC and GW.
"
DEFVAL { 4 }
::= { vismRudpSessionCnfEntry 19 }
vismRudpSessionNullSegTmout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the session idle timeout.
When the session idle time reaches this idle timeout
value, a null segment will be sent to MGC from this GW.
segments. This is a negotiable parameter between
MGC and GW.
"
DEFVAL { 2000 }
::= { vismRudpSessionCnfEntry 20 }
vismRudpSessionTransStateTmout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the number of milliseconds to wait
for transfer state before an auto reset occurs.The
value 0 indicates the connection will be auto-reset
immediately and would not be used with redundant links.
"
DEFVAL { 2000 }
::= { vismRudpSessionCnfEntry 21 }
vismRudpSessionType OBJECT-TYPE
SYNTAX INTEGER {
backhaul (1),
lapdTrunking (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates if the session is configured for
Trunking or PRI Backhaul. By default the object is set
to 'backhaul' and it needs to set to 'lapdTrunking' if LAPD
Trunking needs to be done.
"
DEFVAL { backhaul }
::= { vismRudpSessionCnfEntry 22 }
vismRudpSessionRmtGwIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP address of the remote GW. This will be
used only for 'lapdTrunking' applications and the
vismRudpSessionType must be set to LAPD Trunking.
"
::= { vismRudpSessionCnfEntry 23 }
-- ------------------------------------------------------------------------
-- vismRudpSessionStatTable
-- ------------------------------------------------------------------------
vismRudpSessionStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VismRudpSessionStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table keeps track of state and session-specific
counts. It is per session based."
::= { vismSessionGrp 4 }
vismRudpSessionStatEntry OBJECT-TYPE
SYNTAX VismRudpSessionStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for vismSessionStatEntry."
INDEX { vismRudpSessionStatNum }
::= { vismRudpSessionStatTable 1 }
VismRudpSessionStatEntry ::=
SEQUENCE {
vismRudpSessionStatNum Integer32,
vismRudpSessionAutoResets Counter32,
vismRudpSessionRcvdAutoResets Counter32,
vismRudpSessionRcvdInSeqs Counter32,
vismRudpSessionRcvdOutSeqs Counter32,
vismRudpSessionSentPackets Counter32,
vismRudpSessionRcvdPackets Counter32,
vismRudpSessionSentBytes Counter32,
vismRudpSessionRcvdBytes Counter32,
vismRudpSessionDataSentPkts Counter32,
vismRudpSessionDataRcvdPkts Counter32,
vismRudpSessionDiscardPkts Counter32,
vismRudpSessionRetransPkts Counter32
}
vismRudpSessionStatNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the index of vismRudpSessionStatEntry table.
It is the same as the index of vismRudpSessionCnfEntry
table.
"
::= { vismRudpSessionStatEntry 1 }
vismRudpSessionAutoResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of soft reset for the session
initiated by the XGCP gateway.
"
::= { vismRudpSessionStatEntry 2 }
vismRudpSessionRcvdAutoResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of auto resets initiated
by MGC and received by GW.
"
::= { vismRudpSessionStatEntry 3 }
vismRudpSessionRcvdInSeqs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of packets received in
sequence for the session.
"
::= { vismRudpSessionStatEntry 4 }
vismRudpSessionRcvdOutSeqs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of packets received
out of sequence.
"
::= { vismRudpSessionStatEntry 5 }
vismRudpSessionSentPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of packets sent by GW,
including SYN message."
::= { vismRudpSessionStatEntry 6 }
vismRudpSessionRcvdPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated number of packets received by GW
including active message.
"
::= { vismRudpSessionStatEntry 7 }
vismRudpSessionSentBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of bytes sent to MGC.
"
::= { vismRudpSessionStatEntry 8 }
vismRudpSessionRcvdBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object keeps track of the number of bytes received
from MGC.
"
::= { vismRudpSessionStatEntry 9 }
vismRudpSessionDataSentPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of data packets sent to MGC.
"
::= { vismRudpSessionStatEntry 10 }
vismRudpSessionDataRcvdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of data packets received from MGC.
"
::= { vismRudpSessionStatEntry 11 }
vismRudpSessionDiscardPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of packets discarded by GW.
"
::= { vismRudpSessionStatEntry 12 }
vismRudpSessionRetransPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of packets retransmitted by GW.
"
::= { vismRudpSessionStatEntry 13 }
-- conformance information
ciscoVismSessionMIBConformance OBJECT IDENTIFIER ::=
{ ciscoVismSessionMIB 2 }
ciscoVismSessionMIBGroups OBJECT IDENTIFIER ::=
{ ciscoVismSessionMIBConformance 1 }
ciscoVismSessionMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoVismSessionMIBConformance 2 }
-- compliance statements
ciscoVismSessionCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for objects related
to CISCO-VISM-SESSION-MIB.
"
MODULE -- this module
MANDATORY-GROUPS {
ciscoVismSessionSetGrp,
ciscoVismSessionGrp,
ciscoVismRudpSessionGrp,
ciscoVismRudpSessionStatGrp
}
::= { ciscoVismSessionMIBCompliances 1 }
ciscoVismSessionSetGrp OBJECT-GROUP
OBJECTS {
vismSessionSetNum,
vismSessionSetRowStatus,
vismSessionSetState,
vismSessionSetTotalGrps,
vismSessionSetActiveGrp,
vismSessionSetSwitchFails,
vismSessionSetSwitchSuccesses,
vismSessionSetFaultTolerant
}
STATUS current
DESCRIPTION
"A collection of objects providing session set configuration.
"
::= { ciscoVismSessionMIBGroups 1 }
ciscoVismSessionGrp OBJECT-GROUP
OBJECTS {
vismSessionGrpNum,
vismSessionGrpSetNum,
vismSessionGrpRowStatus,
vismSessionGrpState,
vismSessionGrpCurrSession,
vismSessionGrpTotalSessions,
vismSessionGrpSwitchFails,
vismSessionGrpSwitchSuccesses,
vismSessionGrpMgcName
}
STATUS current
DESCRIPTION
"A collection of objects providing session group
configuration.
"
::= { ciscoVismSessionMIBGroups 2 }
ciscoVismRudpSessionGrp OBJECT-GROUP
OBJECTS {
vismRudpSessionNum,
vismRudpSessionGrpNum,
vismRudpSessionCnfRowStatus,
vismRudpSessionPriority,
vismRudpSessionState,
vismRudpSessionCurrSession,
vismRudpSessionLocalIp,
vismRudpSessionLocalPort,
vismRudpSessionRmtIp,
vismRudpSessionRmtPort,
vismRudpSessionMaxWindow,
vismRudpSessionSyncAttempts,
vismRudpSessionMaxSegSize,
vismRudpSessionMaxAutoReset,
vismRudpSessionRetransTmout,
vismRudpSessionMaxRetrans,
vismRudpSessionMaxCumAck,
vismRudpSessionCumAckTmout,
vismRudpSessionMaxOutOfSeq,
vismRudpSessionNullSegTmout,
vismRudpSessionTransStateTmout,
vismRudpSessionType,
vismRudpSessionRmtGwIp
}
STATUS current
DESCRIPTION
"A collection of objects providing session configuration.
"
::= { ciscoVismSessionMIBGroups 3 }
ciscoVismRudpSessionStatGrp OBJECT-GROUP
OBJECTS {
vismRudpSessionStatNum,
vismRudpSessionAutoResets,
vismRudpSessionRcvdAutoResets,
vismRudpSessionRcvdInSeqs,
vismRudpSessionRcvdOutSeqs,
vismRudpSessionSentPackets,
vismRudpSessionRcvdPackets,
vismRudpSessionSentBytes,
vismRudpSessionRcvdBytes,
vismRudpSessionDataSentPkts,
vismRudpSessionDataRcvdPkts,
vismRudpSessionDiscardPkts,
vismRudpSessionRetransPkts
}
STATUS current
DESCRIPTION
"A collection of objects providing session relayed
statistics information.
"
::= { ciscoVismSessionMIBGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink